--- linux-riscv-6.17-6.17.0.orig/Documentation/admin-guide/LSM/Smack.rst +++ linux-riscv-6.17-6.17.0/Documentation/admin-guide/LSM/Smack.rst @@ -601,10 +601,15 @@ Task Attribute ~~~~~~~~~~~~~~ -The Smack label of a process can be read from /proc//attr/current. A -process can read its own Smack label from /proc/self/attr/current. A +The Smack label of a process can be read from ``/proc//attr/current``. A +process can read its own Smack label from ``/proc/self/attr/current``. A privileged process can change its own Smack label by writing to -/proc/self/attr/current but not the label of another process. +``/proc/self/attr/current`` but not the label of another process. + +Format of writing is : only the label or the label followed by one of the +3 trailers: ``\n`` (by common agreement for ``/proc/...`` interfaces), +``\0`` (because some applications incorrectly include it), +``\n\0`` (because we think some applications may incorrectly include it). File Attribute ~~~~~~~~~~~~~~ @@ -696,6 +701,11 @@ A privileged program may set this to match the label of another task with which it hopes to communicate. +UNIX domain socket (UDS) with a BSD address functions both as a file in a +filesystem and as a socket. As a file, it carries the SMACK64 attribute. This +attribute is not involved in Smack security enforcement and is immutably +assigned the label "*". + Smack Netlabel Exceptions ~~~~~~~~~~~~~~~~~~~~~~~~~ --- linux-riscv-6.17-6.17.0.orig/Documentation/admin-guide/hw-vuln/attack_vector_controls.rst +++ linux-riscv-6.17-6.17.0/Documentation/admin-guide/hw-vuln/attack_vector_controls.rst @@ -218,6 +218,7 @@ SSB X TAA X X X X * (Note 2) TSA X X X X +VMSCAPE X =============== ============== ============ ============= ============== ============ ======== Notes: --- linux-riscv-6.17-6.17.0.orig/Documentation/admin-guide/kernel-parameters.txt +++ linux-riscv-6.17-6.17.0/Documentation/admin-guide/kernel-parameters.txt @@ -4800,6 +4800,12 @@ nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to disable the use of MSI interrupts system-wide. + clearmsi [X86] Clears MSI/MSI-X enable bits early in boot + time in order to avoid issues like adapters + screaming irqs and preventing boot progress. + Also, it enforces the PCI Local Bus spec + rule that those bits should be 0 in system reset + events (useful for kexec/kdump cases). noioapicquirk [APIC] Disable all boot interrupt quirks. Safety option to keep boot IRQs enabled. This should never be necessary. @@ -6429,6 +6435,9 @@ rootflags= [KNL] Set root filesystem mount option string + initramfs_options= [KNL] + Specify mount options for for the initramfs mount. + rootfstype= [KNL] Set root filesystem type rootwait [KNL] Wait (indefinitely) for root device to show up. --- linux-riscv-6.17-6.17.0.orig/Documentation/admin-guide/media/amdisp4-1.rst +++ linux-riscv-6.17-6.17.0/Documentation/admin-guide/media/amdisp4-1.rst @@ -0,0 +1,66 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: + +==================================== +AMD Image Signal Processor (amdisp4) +==================================== + +Introduction +============ + +This file documents the driver for the AMD ISP4 that is part of +AMD Ryzen AI Max 385 SoC. + +The driver is located under drivers/media/platform/amd/isp4 and uses +the Media-Controller API. + +Topology +======== + +.. _amdisp4_topology_graph: + +.. kernel-figure:: amdisp4.dot + :alt: Diagram of the media pipeline topology + :align: center + + + +The driver has 1 sub-device: + +- isp: used to resize and process bayer raw frames in to yuv. + +The driver has 1 video device: + +- capture video device: capture device for retrieving images. + + + - ISP4 Image Signal Processing Subdevice Node + +----------------------------------------------- + +The isp4 is represented as a single V4L2 subdev, the sub-device does not +provide interface to the user space. The sub-device is connected to one video node +(isp4_capture) with immutable active link. The isp entity is connected +to sensor pad 0 and receives the frames using CSI-2 protocol. The sub-device is +also responsible to configure CSI2-2 receiver. +The sub-device processes bayer raw data from the connected sensor and output +them to different YUV formats. The isp also has scaling capabilities. + + - isp4_capture - Frames Capture Video Node + +-------------------------------------------- + +Isp4_capture is a capture device to capture frames to memory. +This entity is the DMA engine that write the frames to memory. +The entity is connected to isp4 sub-device. + +Capturing Video Frames Example +============================== + +.. code-block:: bash + + # set the links + + # start streaming: + v4l2-ctl "-d" "/dev/video0" "--set-fmt-video=width=1920,height=1080,pixelformat=NV12" "--stream-mmap" "--stream-count=10" --- linux-riscv-6.17-6.17.0.orig/Documentation/admin-guide/media/amdisp4.dot +++ linux-riscv-6.17-6.17.0/Documentation/admin-guide/media/amdisp4.dot @@ -0,0 +1,8 @@ +digraph board { + rankdir=TB + n00000001 [label="{{ 0} | amd isp4\n | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n00000004 [style=bold] + n00000004 [label="Preview\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000000a [label="{{} | ov05c10 22-0010\n/dev/v4l-subdev0 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000a:port0 -> n00000001:port0 [style=bold] +} --- linux-riscv-6.17-6.17.0.orig/Documentation/admin-guide/media/v4l-drivers.rst +++ linux-riscv-6.17-6.17.0/Documentation/admin-guide/media/v4l-drivers.rst @@ -9,6 +9,7 @@ .. toctree:: :maxdepth: 2 + amdisp4-1 bttv c3-isp cafe_ccic --- linux-riscv-6.17-6.17.0.orig/Documentation/arch/arm64/silicon-errata.rst +++ linux-riscv-6.17-6.17.0/Documentation/arch/arm64/silicon-errata.rst @@ -200,6 +200,8 @@ +----------------+-----------------+-----------------+-----------------------------+ | ARM | Neoverse-V3 | #3312417 | ARM64_ERRATUM_3194386 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Neoverse-V3AE | #3312417 | ARM64_ERRATUM_3194386 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | MMU-500 | #841119,826419 | ARM_SMMU_MMU_500_CPRE_ERRATA| | | | #562869,1047329 | | +----------------+-----------------+-----------------+-----------------------------+ --- linux-riscv-6.17-6.17.0.orig/Documentation/arch/x86/tdx.rst +++ linux-riscv-6.17-6.17.0/Documentation/arch/x86/tdx.rst @@ -142,13 +142,6 @@ Note TDX works with CPU logical online/offline, thus the kernel still allows to offline logical CPU and online it again. -Kexec() -~~~~~~~ - -TDX host support currently lacks the ability to handle kexec. For -simplicity only one of them can be enabled in the Kconfig. This will be -fixed in the future. - Erratum ~~~~~~~ @@ -171,6 +164,13 @@ machine check handler to tell user the machine check may be caused by kernel bug on TDX private memory. +Kexec +~~~~~~~ + +Currently kexec doesn't work on the TDX platforms with the aforementioned +erratum. It fails when loading the kexec kernel image. Otherwise it +works normally. + Interaction vs S3 and deeper states ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- linux-riscv-6.17-6.17.0.orig/Documentation/cgroups/namespace.txt +++ linux-riscv-6.17-6.17.0/Documentation/cgroups/namespace.txt @@ -0,0 +1,142 @@ + CGroup Namespaces + +CGroup Namespace provides a mechanism to virtualize the view of the +/proc//cgroup file. The CLONE_NEWCGROUP clone-flag can be used with +clone() and unshare() syscalls to create a new cgroup namespace. +The process running inside the cgroup namespace will have its /proc//cgroup +output restricted to cgroupns-root. cgroupns-root is the cgroup of the process +at the time of creation of the cgroup namespace. + +Prior to CGroup Namespace, the /proc//cgroup file used to show complete +path of the cgroup of a process. In a container setup (where a set of cgroups +and namespaces are intended to isolate processes), the /proc//cgroup file +may leak potential system level information to the isolated processes. + +For Example: + $ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1 + +The path '/batchjobs/container_id1' can generally be considered as system-data +and its desirable to not expose it to the isolated process. + +CGroup Namespaces can be used to restrict visibility of this path. +For Example: + # Before creating cgroup namespace + $ ls -l /proc/self/ns/cgroup + lrwxrwxrwx 1 root root 0 2014-07-15 10:37 /proc/self/ns/cgroup -> cgroup:[4026531835] + $ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1 + + # unshare(CLONE_NEWCGROUP) and exec /bin/bash + $ ~/unshare -c + [ns]$ ls -l /proc/self/ns/cgroup + lrwxrwxrwx 1 root root 0 2014-07-15 10:35 /proc/self/ns/cgroup -> cgroup:[4026532183] + # From within new cgroupns, process sees that its in the root cgroup + [ns]$ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/ + + # From global cgroupns: + $ cat /proc//cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1 + + # Unshare cgroupns along with userns and mountns + # Following calls unshare(CLONE_NEWCGROUP|CLONE_NEWUSER|CLONE_NEWNS), then + # sets up uid/gid map and execs /bin/bash + $ ~/unshare -c -u -m + # Originally, we were in /batchjobs/container_id1 cgroup. Mount our own cgroup + # hierarchy. + [ns]$ mount -t cgroup cgroup /tmp/cgroup + [ns]$ ls -l /tmp/cgroup + total 0 + -r--r--r-- 1 root root 0 2014-10-13 09:32 cgroup.controllers + -r--r--r-- 1 root root 0 2014-10-13 09:32 cgroup.populated + -rw-r--r-- 1 root root 0 2014-10-13 09:25 cgroup.procs + -rw-r--r-- 1 root root 0 2014-10-13 09:32 cgroup.subtree_control + +The cgroupns-root (/batchjobs/container_id1 in above example) becomes the +filesystem root for the namespace specific cgroupfs mount. + +The virtualization of /proc/self/cgroup file combined with restricting +the view of cgroup hierarchy by namespace-private cgroupfs mount +should provide a completely isolated cgroup view inside the container. + +In its current form, the cgroup namespaces patcheset provides following +behavior: + +(1) The 'cgroupns-root' for a cgroup namespace is the cgroup in which + the process calling unshare is running. + For ex. if a process in /batchjobs/container_id1 cgroup calls unshare, + cgroup /batchjobs/container_id1 becomes the cgroupns-root. + For the init_cgroup_ns, this is the real root ('/') cgroup + (identified in code as cgrp_dfl_root.cgrp). + +(2) The cgroupns-root cgroup does not change even if the namespace + creator process later moves to a different cgroup. + $ ~/unshare -c # unshare cgroupns in some cgroup + [ns]$ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/ + [ns]$ mkdir sub_cgrp_1 + [ns]$ echo 0 > sub_cgrp_1/cgroup.procs + [ns]$ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/sub_cgrp_1 + +(3) Each process gets its CGROUPNS specific view of /proc//cgroup +(a) Processes running inside the cgroup namespace will be able to see + cgroup paths (in /proc/self/cgroup) only inside their root cgroup + [ns]$ sleep 100000 & # From within unshared cgroupns + [1] 7353 + [ns]$ echo 7353 > sub_cgrp_1/cgroup.procs + [ns]$ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/sub_cgrp_1 + +(b) From global cgroupns, the real cgroup path will be visible: + $ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1/sub_cgrp_1 + +(c) From a sibling cgroupns (cgroupns root-ed at a different cgroup), cgroup + path relative to its own cgroupns-root will be shown: + # ns2's cgroupns-root is at '/batchjobs/container_id2' + [ns2]$ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/../container_id2/sub_cgrp_1 + + Note that the relative path always starts with '/' to indicate that its + relative to the cgroupns-root of the caller. + +(4) Processes inside a cgroupns can move in-and-out of the cgroupns-root + (if they have proper access to external cgroups). + # From inside cgroupns (with cgroupns-root at /batchjobs/container_id1), and + # assuming that the global hierarchy is still accessible inside cgroupns: + $ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/sub_cgrp_1 + $ echo 7353 > batchjobs/container_id2/cgroup.procs + $ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/../container_id2 + + Note that this kind of setup is not encouraged. A task inside cgroupns + should only be exposed to its own cgroupns hierarchy. Otherwise it makes + the virtualization of /proc//cgroup less useful. + +(5) Setns to another cgroup namespace is allowed when: + (a) the process has CAP_SYS_ADMIN in its current userns + (b) the process has CAP_SYS_ADMIN in the target cgroupns' userns + No implicit cgroup changes happen with attaching to another cgroupns. It + is expected that the somone moves the attaching process under the target + cgroupns-root. + +(6) When some thread from a multi-threaded process unshares its + cgroup-namespace, the new cgroupns gets applied to the entire process (all + the threads). For the unified-hierarchy this is expected as it only allows + process-level containerization. For the legacy hierarchies this may be + unexpected. So all the threads in the process will have the same cgroup. + +(7) The cgroup namespace is alive as long as there is atleast 1 + process inside it. When the last process exits, the cgroup + namespace is destroyed. The cgroupns-root and the actual cgroups + remain though. + +(8) Namespace specific cgroup hierarchy can be mounted by a process running + inside cgroupns: + $ mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT + + This will mount the unified cgroup hierarchy with cgroupns-root as the + filesystem root. The process needs CAP_SYS_ADMIN in its userns and mntns. --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/arm/qcom.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1146,6 +1146,7 @@ - enum: - asus,vivobook-s15 - asus,zenbook-a14-ux3407ra + - dell,latitude-7455 - dell,xps13-9345 - hp,elitebook-ultra-g1q - hp,omnibook-x14 @@ -1158,7 +1159,19 @@ - items: - enum: - - asus,zenbook-a14-ux3407qa + - asus,zenbook-a14-ux3407qa-lcd + - asus,zenbook-a14-ux3407qa-oled + - const: asus,zenbook-a14-ux3407qa + - const: qcom,x1p42100 + + - items: + - enum: + - acer,swift-sf14-11 + - const: qcom,x1p64100 + - const: qcom,x1e80100 + + - items: + - enum: - qcom,x1p42100-crd - const: qcom,x1p42100 --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml @@ -48,6 +48,11 @@ - const: microchip,mpfs-ccache - const: sifive,fu540-c000-ccache - const: cache + - items: + - const: microchip,pic64gx-ccache + - const: microchip,mpfs-ccache + - const: sifive,fu540-c000-ccache + - const: cache cache-block-size: const: 64 --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml @@ -17,7 +17,11 @@ properties: compatible: - const: microchip,mpfs-ccc + oneOf: + - items: + - const: microchip,pic64gx-ccc + - const: microchip,mpfs-ccc + - const: microchip,mpfs-ccc reg: items: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml @@ -19,19 +19,30 @@ properties: compatible: - const: microchip,mpfs-clkcfg + oneOf: + - items: + - const: microchip,pic64gx-clkcfg + - const: microchip,mpfs-clkcfg + - const: microchip,mpfs-clkcfg reg: - items: - - description: | - clock config registers: - These registers contain enable, reset & divider tables for the, cpu, - axi, ahb and rtc/mtimer reference clocks as well as enable and reset - for the peripheral clocks. - - description: | - mss pll dri registers: - Block of registers responsible for dynamic reconfiguration of the mss - pll + oneOf: + - items: + - description: | + clock config registers: + These registers contain enable, reset & divider tables for the, cpu, + axi, ahb and rtc/mtimer reference clocks as well as enable and reset + for the peripheral clocks. + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll + deprecated: true + - items: + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll clocks: maxItems: 1 @@ -62,6 +73,16 @@ - clocks - '#clock-cells' +if: + properties: + compatible: + contains: + const: microchip,pic64gx-clkcfg +then: + properties: + reg: + maxItems: 1 + additionalProperties: false examples: @@ -69,11 +90,12 @@ - | #include soc { - #address-cells = <2>; - #size-cells = <2>; - clkcfg: clock-controller@20002000 { + #address-cells = <1>; + #size-cells = <1>; + + clkcfg: clock-controller@3E001000 { compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + reg = <0x3E001000 0x1000>; clocks = <&ref>; #clock-cells = <1>; }; --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -32,9 +32,36 @@ - description: PCIe 5 pipe clock - description: PCIe 6a pipe clock - description: PCIe 6b pipe clock - - description: USB QMP Phy 0 clock source - - description: USB QMP Phy 1 clock source - - description: USB QMP Phy 2 clock source + - description: USB4_0 QMPPHY clock source + - description: USB4_1 QMPPHY clock source + - description: USB4_2 QMPPHY clock source + - description: USB4_0 PHY DP0 GMUX clock source + - description: USB4_0 PHY DP1 GMUX clock source + - description: USB4_0 PHY PCIE PIPEGMUX clock source + - description: USB4_0 PHY PIPEGMUX clock source + - description: USB4_0 PHY SYS PCIE PIPEGMUX clock source + - description: USB4_1 PHY DP0 GMUX 2 clock source + - description: USB4_1 PHY DP1 GMUX 2 clock source + - description: USB4_1 PHY PCIE PIPEGMUX clock source + - description: USB4_1 PHY PIPEGMUX clock source + - description: USB4_1 PHY SYS PCIE PIPEGMUX clock source + - description: USB4_2 PHY DP0 GMUX 2 clock source + - description: USB4_2 PHY DP1 GMUX 2 clock source + - description: USB4_2 PHY PCIE PIPEGMUX clock source + - description: USB4_2 PHY PIPEGMUX clock source + - description: USB4_2 PHY SYS PCIE PIPEGMUX clock source + - description: USB4_0 PHY RX 0 clock source + - description: USB4_0 PHY RX 1 clock source + - description: USB4_1 PHY RX 0 clock source + - description: USB4_1 PHY RX 1 clock source + - description: USB4_2 PHY RX 0 clock source + - description: USB4_2 PHY RX 1 clock source + - description: USB4_0 PHY PCIE PIPE clock source + - description: USB4_0 PHY max PIPE clock source + - description: USB4_1 PHY PCIE PIPE clock source + - description: USB4_1 PHY max PIPE clock source + - description: USB4_2 PHY PCIE PIPE clock source + - description: USB4_2 PHY max PIPE clock source power-domains: description: @@ -67,7 +94,34 @@ <&pcie6b_phy>, <&usb_1_ss0_qmpphy 0>, <&usb_1_ss1_qmpphy 1>, - <&usb_1_ss2_qmpphy 2>; + <&usb_1_ss2_qmpphy 2>, + <&usb4_0_phy_dp0_gmux_clk>, + <&usb4_0_phy_dp1_gmux_clk>, + <&usb4_0_phy_pcie_pipegmux_clk>, + <&usb4_0_phy_pipegmux_clk>, + <&usb4_0_phy_sys_pcie_pipegmux_clk>, + <&usb4_1_phy_dp0_gmux_2_clk>, + <&usb4_1_phy_dp1_gmux_2_clk>, + <&usb4_1_phy_pcie_pipegmux_clk>, + <&usb4_1_phy_pipegmux_clk>, + <&usb4_1_phy_sys_pcie_pipegmux_clk>, + <&usb4_2_phy_dp0_gmux_2_clk>, + <&usb4_2_phy_dp1_gmux_2_clk>, + <&usb4_2_phy_pcie_pipegmux_clk>, + <&usb4_2_phy_pipegmux_clk>, + <&usb4_2_phy_sys_pcie_pipegmux_clk>, + <&usb4_0_phy_rx_0_clk>, + <&usb4_0_phy_rx_1_clk>, + <&usb4_1_phy_rx_0_clk>, + <&usb4_1_phy_rx_1_clk>, + <&usb4_2_phy_rx_0_clk>, + <&usb4_2_phy_rx_1_clk>, + <&usb4_0_phy_pcie_pipe_clk>, + <&usb4_0_phy_max_pipe_clk>, + <&usb4_1_phy_pcie_pipe_clk>, + <&usb4_1_phy_max_pipe_clk>, + <&usb4_2_phy_pcie_pipe_clk>, + <&usb4_2_phy_max_pipe_clk>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; #reset-cells = <1>; --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -80,6 +80,13 @@ dmas: maxItems: 1 + phys: + maxItems: 1 + + phy-names: + items: + - const: lvds0 + resets: anyOf: - items: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -20,9 +20,6 @@ - Maxime Ripard properties: - "#phy-cells": - const: 0 - compatible: oneOf: - const: allwinner,sun8i-a83t-dw-hdmi @@ -32,6 +29,7 @@ - enum: - allwinner,sun8i-h3-dw-hdmi - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun20i-d1-dw-hdmi - allwinner,sun50i-a64-dw-hdmi - const: allwinner,sun8i-a83t-dw-hdmi --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -19,6 +19,7 @@ - allwinner,sun8i-a83t-hdmi-phy - allwinner,sun8i-h3-hdmi-phy - allwinner,sun8i-r40-hdmi-phy + - allwinner,sun20i-d1-hdmi-phy - allwinner,sun50i-a64-hdmi-phy - allwinner,sun50i-h6-hdmi-phy --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -124,6 +124,40 @@ contains: enum: - qcom,adreno-gmu-623.0 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + - description: GPU AHB clock + - description: GPU HUB CX clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + - const: ahb + - const: hub + + - if: + properties: + compatible: + contains: + enum: - qcom,adreno-gmu-635.0 - qcom,adreno-gmu-660.1 - qcom,adreno-gmu-663.0 --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -21,6 +21,10 @@ - enum: # Samsung 13" 3K (2880×1920 pixels) eDP AMOLED panel - samsung,atna30dw01 + # Samsung 14" FHD+ (1920x1200 pixels) eDP AMOLED panel + - samsung,atna40ct06 + # Samsung 14" WQXGA+ (2880x1800 pixels) eDP AMOLED panel + - samsung,atna40cu11 # Samsung 14" WQXGA+ (2880×1800 pixels) eDP AMOLED panel - samsung,atna40yk20 # Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/display/panel/sitronix,st7701s.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/display/panel/sitronix,st7701s.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sitronix,st7701s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7701 based LCD panels + +maintainers: + - Samuel Holland + +description: | + Panel used on Lichee RV 86 Panel + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - const: sitronix,st7701s + + backlight: true + + reset-gpios: true + +required: + - compatible + - reset-gpios + +unevaluatedProperties: false --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/eeprom/at25.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -56,6 +56,7 @@ $ref: /schemas/types.yaml#/definitions/uint32 description: Total eeprom size in bytes. + Also used for FRAMs without device ID where the size cannot be detected. address-width: $ref: /schemas/types.yaml#/definitions/uint32 @@ -146,4 +147,11 @@ reg = <1>; spi-max-frequency = <40000000>; }; + + fram@2 { + compatible = "cypress,fm25", "atmel,at25"; + reg = <2>; + spi-max-frequency = <20000000>; + size = <2048>; + }; }; --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -11,7 +11,10 @@ properties: compatible: - items: + oneOf: + - items: + - const: microchip,pic64gx-gpio + - const: microchip,mpfs-gpio - enum: - microchip,mpfs-gpio - microchip,coregpio-rtl-v3 --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -59,6 +59,7 @@ - items: - enum: - canaan,k210-plic + - microchip,pic64gx-plic - sifive,fu540-c000-plic - spacemit,k1-plic - starfive,jh7100-plic --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml @@ -11,7 +11,11 @@ properties: compatible: - const: microchip,mpfs-mailbox + oneOf: + - items: + - const: microchip,pic64gx-mailbox + - const: microchip,mpfs-mailbox + - const: microchip,mpfs-mailbox reg: oneOf: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/media/qcom,sm8350-venus.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/media/qcom,sm8350-venus.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm8350-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Venus video encode and decode accelerators + +maintainers: + - Konrad Dybcio + +description: | + The Venus Iris2 IP is a video encode and decode accelerator present + on Qualcomm platforms + +allOf: + - $ref: qcom,venus-common.yaml# + +properties: + compatible: + enum: + - qcom,sc8280xp-venus + - qcom,sm8350-venus + + clocks: + maxItems: 3 + + clock-names: + items: + - const: iface + - const: core + - const: vcodec0_core + + resets: + maxItems: 1 + + reset-names: + items: + - const: core + + power-domains: + maxItems: 3 + + power-domain-names: + items: + - const: venus + - const: vcodec0 + - const: mx + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: cpu-cfg + - const: video-mem + - const: video-llcc + + operating-points-v2: true + opp-table: + type: object + + iommus: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - power-domain-names + - iommus + - video-decoder + - video-encoder + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + venus: video-codec@aa00000 { + compatible = "qcom,sm8350-venus"; + reg = <0x0aa00000 0x100000>; + interrupts = ; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "core"; + + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SM8350_MX>; + power-domain-names = "venus", + "vcodec0", + "mx"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "cpu-cfg", + "video-mem", + "video-llcc"; + + operating-points-v2 = <&venus_opp_table>; + iommus = <&apps_smmu 0x2100 0x400>; + memory-region = <&pil_video_mem>; + + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/starfive,jh7110-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 DMC + +maintainers: + - E Shattow + +description: + JH7110 DDR external memory interface LPDDR4/DDR4/DDR3/LPDDR3 32-bit at + 2133Mbps (up to 2800Mbps). + +properties: + compatible: + items: + - const: starfive,jh7110-dmc + + reg: + items: + - description: controller registers + - description: phy registers + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pll + + resets: + items: + - description: axi + - description: osc + - description: apb + + reset-names: + items: + - const: axi + - const: osc + - const: apb + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + + memory-controller@15700000 { + compatible = "starfive,jh7110-dmc"; + reg = <0x0 0x15700000 0x0 0x10000>, + <0x0 0x13000000 0x0 0x10000>; + clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>; + clock-names = "pll"; + resets = <&syscrg JH7110_SYSRST_DDR_AXI>, + <&syscrg JH7110_SYSRST_DDR_OSC>, + <&syscrg JH7110_SYSRST_DDR_APB>; + reset-names = "axi", "osc", "apb"; + }; + }; --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -38,7 +38,10 @@ - cdns,sam9x60-macb # Microchip sam9x60 SoC - microchip,mpfs-macb # Microchip PolarFire SoC - const: cdns,macb # Generic - + - items: + - const: microchip,pic64gx-macb # Microchip PIC64GX SoC + - const: microchip,mpfs-macb # Microchip PolarFire SoC + - const: cdns,macb # Generic - items: - enum: - atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml @@ -36,13 +36,13 @@ reg: items: - - description: External local bus interface registers + - description: Data Bus Interface registers - description: Meson designed configuration registers - description: PCIe configuration space reg-names: items: - - const: elbi + - const: dbi - const: cfg - const: config @@ -113,7 +113,7 @@ pcie: pcie@f9800000 { compatible = "amlogic,axg-pcie", "snps,dw-pcie"; reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = ; clocks = <&pclk>, <&clk_port>, <&clk_phy>; clock-names = "pclk", "port", "general"; --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -73,10 +73,21 @@ description: See include/dt-bindings/phy/phy-qcom-qmp.h - orientation-switch: + mode-switch: true + orientation-switch: true + + qcom,combo-initial-mode: description: - Flag the PHY as possible handler of USB Type-C orientation switching - type: boolean + Describe the initial mode of the Combo PHY configuration. + The Combo PHY is a wrapper on top of a DP PHY and an USB3 PHY, + sharing the same SuperSpeed lanes with either DisplayPort over + the 4 lanes (dp), USB3 on a pair of lanes (usb3) or both + technologies in a 2+2 configuration (usb3+dp) as default. + default: usb3+dp + enum: + - usb3+dp + - usb3 + - dp ports: $ref: /schemas/graph.yaml#/properties/ports @@ -106,6 +117,7 @@ - "#phy-cells" allOf: + - $ref: /schemas/usb/usb-switch.yaml# - if: properties: compatible: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml @@ -57,11 +57,24 @@ - clocks - clock-names - '#phy-cells' - - power-domains - resets - reset-names - rockchip,grf +allOf: + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-csi-dphy + - rockchip,rk1808-csi-dphy + - rockchip,rk3326-csi-dphy + - rockchip,rk3368-csi-dphy + then: + required: + - power-domains + additionalProperties: false examples: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC iomux0 + +maintainers: + - Conor Dooley + +description: + iomux0 is responsible for routing some functions to either the FPGA fabric, + or to MSSIOs. It only performs muxing, and has no IO configuration role, as + fabric IOs are configured separately and just routing a function to MSSIOs is + not sufficient for it to actually get mapped to an MSSIO, just makes it + possible. + +properties: + compatible: + oneOf: + - const: microchip,mpfs-pinctrl-iomux0 + - items: + - const: microchip,pic64gx-pinctrl-iomux0 + - const: microchip,mpfs-pinctrl-iomux0 + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '^mux-': + type: object + $ref: pinmux-node.yaml + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ spi0, spi1, i2c0, i2c1, can0, can1, qspi, uart0, uart1, uart2, + uart3, uart4, mdio0, mdio1 ] + + groups: + description: + An array of strings. Each string contains the name of a group. + items: + enum: [ spi0_fabric, spi0_mssio, spi1_fabric, spi1_mssio, i2c0_fabric, + i2c0_mssio, i2c1_fabric, i2c1_mssio, can0_fabric, can0_mssio, + can1_fabric, can1_mssio, qspi_fabric, qspi_mssio, + uart0_fabric, uart0_mssio, uart1_fabric, uart1_mssio, + uart2_fabric, uart2_mssio, uart3_fabric, uart3_mssio, + uart4_fabric, uart4_mssio, mdio0_fabric, mdio0_mssio, + mdio1_fabric, mdio1_mssio ] + + required: + - function + - groups + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #size-cells = <1>; + #address-cells = <1>; + + pinctrl@200 { + compatible = "microchip,mpfs-pinctrl-iomux0"; + reg = <0x200 0x4>; + + mux-spi0-fabric { + function = "spi0"; + groups = "spi0_fabric"; + }; + + mux-spi1-mssio { + function = "spi1"; + groups = "spi1_mssio"; + }; + }; + }; + +... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-mssio.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-mssio.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,mpfs-pinctrl-mssio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Polarfire SoC MSSIO pinctrl + +maintainers: + - Conor Dooley + +properties: + compatible: + oneOf: + - const: microchip,mpfs-pinctrl-mssio + - items: + - const: microchip,pic64gx-pinctrl-mssio + - const: microchip,mpfs-pinctrl-mssio + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '-cfg$': + type: object + additionalProperties: false + + patternProperties: + '-pins$': + type: object + additionalProperties: false + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + description: + The list of IOs that properties in the pincfg node apply to. + + function: + description: + A string containing the name of the function to mux for these + pins. The "reserved" function tristates a pin. + enum: [ sd, emmc, qspi, spi, usb, uart, i2c, can, mdio, misc + reserved, gpio, fabric-test, tied-low, tied-high, tristate ] + + bias-bus-hold: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-schmitt-enable: true + low-power-enable: true + + drive-strength: + enum: [ 2, 4, 6, 8, 10, 12, 16, 20 ] + + power-source: + description: + Which bank voltage to use. This cannot differ for pins in a + given bank, the whole bank uses the same voltage. + enum: [ 1200000, 1500000, 1800000, 2500000, 3300000 ] + + microchip,clamp-diode: + $ref: /schemas/types.yaml#/definitions/flag + description: + Reflects the "Clamp Diode" setting in the MSS Configurator for + this pin. This setting controls whether or not input voltage + clamping should be enabled. + + microchip,ibufmd: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Reflects the "IBUFMD" bits in the MSS Configurator output files + for this pin. + + required: + - pins + - function + - power-source + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@204 { + compatible = "microchip,mpfs-pinctrl-mssio"; + reg = <0x204 0x7c>; + + ikrd-spi1-cfg { + spi1-pins { + pins = <30>, <31>, <32>, <33>; + function = "spi"; + bias-pull-up; + drive-strength = <8>; + power-source = <3300000>; + microchip,ibufmd = <0x1>; + }; + }; + }; +... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC64GX GPIO2 Mux + +maintainers: + - Conor Dooley + +description: + The "GPIO2 Mux" determines whether GPIO2 or select other functions are + available on package pins on PIC64GX. Some of these functions must be + mapped to this mux via iomux0 for settings here to have any impact. + +properties: + compatible: + const: microchip,pic64gx-pinctrl-gpio2 + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '^mux-': + type: object + $ref: pinmux-node.yaml + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ mdio0, mdio1, spi0, can0, pcie, qspi, uart3, uart4, can1, uart2, gpio ] + + groups: + description: + An array of strings. Each string contains the name of a group. + items: + enum: [ mdio0, mdio1, spi0, can0, pcie, qspi, uart3, uart4, can1, uart2, + gpio_mdio0, gpio_mdio1, gpio_spi0, gpio_can0, gpio_pcie, + gpio_qspi, gpio_uart3, gpio_uart4, gpio_can1, gpio_uart2 ] + + required: + - function + - groups + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@41000000 { + compatible = "microchip,pic64gx-pinctrl-gpio2"; + reg = <0x41000000 0x4>; + pinctrl-use-default; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_gpio2>, <&mdio1_gpio2>, <&spi0_gpio2>, <&qspi_gpio2>, + <&uart3_gpio2>, <&uart4_gpio2>, <&can1_gpio2>, <&can0_gpio2>, + <&uart2_gpio2>; + + mux-gpio2 { + function = "gpio"; + groups = "gpio_mdio1", "gpio_spi0", "gpio_can0", "gpio_pcie", + "gpio_qspi", "gpio_uart3", "gpio_uart4", "gpio_can1"; + }; + }; + +... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -50,18 +50,20 @@ groups: description: Name of the pin group to use for the functions. - $ref: /schemas/types.yaml#/definitions/string - enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, - i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, - spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, - spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, - uart0_grp, uart1_grp, uart2_grp, uart3_grp, - pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, - pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, - pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, - pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, - pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, - pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + items: + enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, + i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, + spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, + spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp, + uart0_grp, uart1_grp, uart2_grp, uart3_grp, + pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp, + pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp, + pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp, + pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp, + pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp, + pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp] + minItems: 1 + maxItems: 8 drive-strength: enum: [2, 4, 6, 8, 16, 24, 32] --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/platform/lenovo,yoga-slim7x-ec.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/platform/lenovo,yoga-slim7x-ec.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/platform/lenovo,yoga-slim7x-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lenovo Yoga Slim 7x Embedded Controller. + +maintainers: + - Maya Matuszczyk + +description: + The Lenovo Yoga Slim 7x has an EC which handles some minor functions, like + power LED or some special keys on the keyboard. This bindings describes + how it is connected + +properties: + compatible: + const: lenovo,yoga-slim7x-ec + + reg: + const: 0x76 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - |+ + #include + i2c5 { + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@76 { + compatible = "lenovo,yoga-slim7x-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner D1, T113-S3 and R329 PWM + +maintainers: + - Aleksandr Shubin + - Brandon Cheo Fusi + +properties: + compatible: + oneOf: + - const: allwinner,sun20i-d1-pwm + - items: + - const: allwinner,sun50i-r329-pwm + - const: allwinner,sun20i-d1-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + + clocks: + items: + - description: Bus clock + - description: 24 MHz oscillator + - description: APB clock + + clock-names: + items: + - const: bus + - const: hosc + - const: apb + + resets: + maxItems: 1 + + allwinner,npwms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of PWM channels configured for this instance + enum: [6, 8, 9] + +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-r329-pwm + + then: + required: + - allwinner,npwms + +unevaluatedProperties: false + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + - clock-names + - resets + +examples: + - | + #include + #include + + pwm: pwm@2000c00 { + compatible = "allwinner,sun20i-d1-pwm"; + reg = <0x02000c00 0x400>; + clocks = <&ccu CLK_BUS_PWM>, <&dcxo>, <&ccu CLK_APB0>; + clock-names = "bus", "hosc", "apb"; + resets = <&ccu RST_BUS_PWM>; + #pwm-cells = <0x3>; + }; + +... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-analog-ldos.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-analog-ldos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner D1 Analog LDOs + +maintainers: + - Samuel Holland + +description: + Allwinner D1 contains a set of LDOs which are designed to supply analog power + inside and outside the SoC. They are controlled by a register within the audio + codec MMIO space, but which is not part of the audio codec clock/reset domain. + +properties: + compatible: + enum: + - allwinner,sun20i-d1-analog-ldos + + reg: + maxItems: 1 + + nvmem-cells: + items: + - description: NVMEM cell for the calibrated bandgap reference trim value + + nvmem-cell-names: + items: + - const: bg_trim + +patternProperties: + "^(a|hp)ldo$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + audio-codec@2030000 { + compatible = "simple-mfd", "syscon"; + reg = <0x2030000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + regulators@2030348 { + compatible = "allwinner,sun20i-d1-analog-ldos"; + reg = <0x2030348 0x4>; + nvmem-cells = <&bg_trim>; + nvmem-cell-names = "bg_trim"; + + reg_aldo: aldo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_hpldo: hpldo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + +... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/riscv/microchip.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/riscv/microchip.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Microchip PolarFire SoC-based boards +title: Microchip SoC-based boards maintainers: - Conor Dooley - Daire McNamara description: - Microchip PolarFire SoC-based boards + Microchip SoC-based boards properties: $nodename: @@ -19,13 +19,26 @@ compatible: oneOf: - items: + - const: microchip,mpfs-icicle-prod-reference-rtl-v2507 + - const: microchip,mpfs-icicle-kit-prod + - const: microchip,mpfs-icicle-kit + - const: microchip,mpfs-prod + - const: microchip,mpfs + + - items: - enum: - microchip,mpfs-icicle-reference-rtlv2203 - microchip,mpfs-icicle-reference-rtlv2210 + - microchip,mpfs-icicle-es-reference-rtl-v2507 - const: microchip,mpfs-icicle-kit - const: microchip,mpfs - items: + - const: microchip,mpfs-disco-kit-reference-rtl-v2507 + - const: microchip,mpfs-disco-kit + - const: microchip,mpfs + + - items: - enum: - aldec,tysom-m-mpfs250t-rev2 - aries,m100pfsevp @@ -33,6 +46,9 @@ - microchip,mpfs-sev-kit - sundance,polarberry - const: microchip,mpfs + - items: + - const: microchip,pic64gx-curiosity-kit + - const: microchip,pic64gx additionalProperties: true --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/riscv/starfive.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/riscv/starfive.yaml @@ -28,11 +28,20 @@ - enum: - deepcomputing,fml13v01 - milkv,mars + - milkv,marscm-emmc + - milkv,marscm-lite - pine64,star64 - starfive,visionfive-2-v1.2a - starfive,visionfive-2-v1.3b + - xunlong,orangepi-rv - const: starfive,jh7110 + - items: + - enum: + - starfive,visionfive-2-lite + - starfive,visionfive-2-lite-emmc + - const: starfive,jh7110s + additionalProperties: true ... --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/serial/renesas,rsci.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/serial/renesas,rsci.yaml @@ -54,8 +54,6 @@ power-domains: maxItems: 1 - uart-has-rtscts: false - required: - compatible - reg --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -197,6 +197,7 @@ - renesas,rcar-gen2-scif - renesas,rcar-gen3-scif - renesas,rcar-gen4-scif + - renesas,rcar-gen5-scif then: properties: interrupts: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC Microprocessor Subsystem (MSS) sysreg register region + +maintainers: + - Conor Dooley + +description: + An wide assortment of registers that control elements of the MSS on PolarFire + SoC, including pinmuxing, resets and clocks among others. + +properties: + compatible: + oneOf: + - items: + - const: microchip,mpfs-mss-top-sysreg + - const: syscon + - const: simple-mfd + - items: + - const: microchip,pic64gx-mss-top-sysreg + - const: microchip,mpfs-mss-top-sysreg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#reset-cells': + description: + The AHB/AXI peripherals on the PolarFire SoC have reset support, so + from CLK_ENVM to CLK_CFM. The reset consumer should specify the + desired peripheral via the clock ID in its "resets" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list + of PolarFire clock/reset IDs. + const: 1 + + pinctrl@200: + type: object + $ref: /schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml + + pinctrl@204: + type: object + $ref: /schemas/pinctrl/microchip,mpfs-pinctrl-mssio.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@20002000 { + compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd"; + reg = <0x20002000 0x1000>; + #reset-cells = <1>; + }; + --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -24,7 +24,9 @@ maxItems: 1 compatible: - const: microchip,mpfs-sys-controller + enum: + - microchip,mpfs-sys-controller + - microchip,pic64gx-sys-controller microchip,bitstream-flash: $ref: /schemas/types.yaml#/definitions/phandle --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -62,6 +62,10 @@ - 0 - 1 + vref-supply: + description: + Regulator for the analog reference voltage + allOf: - if: properties: @@ -132,6 +136,17 @@ - clock-names - resets + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun20i-d1-ths + + then: + required: + - vref-supply + required: - compatible - reg --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -31,6 +31,7 @@ - enum: - canaan,k210-clint # Canaan Kendryte K210 - eswin,eic7700-clint # ESWIN EIC7700 + - microchip,pic64gx-clint # Microchip PIC64GX - sifive,fu540-c000-clint # SiFive FU540 - spacemit,k1-clint # SpacemiT K1 - starfive,jh7100-clint # StarFive JH7100 --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -89,13 +89,21 @@ - reg - "#address-cells" - "#size-cells" - - dma-ranges - ranges - clocks - clock-names - interrupts - power-domains +allOf: + - if: + properties: + compatible: + const: fsl,imx8mp-dwc3 + then: + required: + - dma-ranges + additionalProperties: false examples: --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -68,6 +68,7 @@ - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 - qcom,x1e80100-dwc3 + - qcom,x1e80100-dwc3-mp - const: qcom,snps-dwc3 reg: @@ -460,8 +461,10 @@ then: properties: interrupts: + minItems: 4 maxItems: 5 interrupt-names: + minItems: 4 items: - const: dwc_usb3 - const: pwr_event --- linux-riscv-6.17-6.17.0.orig/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ linux-riscv-6.17-6.17.0/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -86,6 +86,8 @@ description: Allegro DVT "^allegromicro,.*": description: Allegro MicroSystems, Inc. + "^alliedtelesis,.*": + description: Allied Telesis, Inc. "^alliedvision,.*": description: Allied Vision Technologies GmbH "^allo,.*": @@ -229,6 +231,8 @@ description: Bitmain Technologies "^blaize,.*": description: Blaize, Inc. + "^bluegiga,.*": + description: Bluegiga Technologies Ltd. "^blutek,.*": description: BluTek Power "^boe,.*": @@ -247,6 +251,8 @@ description: Bticino International "^buffalo,.*": description: Buffalo, Inc. + "^buglabs,.*": + description: Bug Labs, Inc. "^bur,.*": description: B&R Industrial Automation GmbH "^bytedance,.*": @@ -325,6 +331,8 @@ description: Conexant Systems, Inc. "^colorfly,.*": description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. + "^compal,.*": + description: Compal Electronics, Inc. "^compulab,.*": description: CompuLab Ltd. "^comvetia,.*": @@ -353,6 +361,8 @@ description: Guangzhou China Star Optoelectronics Technology Co., Ltd "^csq,.*": description: Shenzen Chuangsiqi Technology Co.,Ltd. + "^csr,.*": + description: Cambridge Silicon Radio "^ctera,.*": description: CTERA Networks Intl. "^ctu,.*": @@ -455,6 +465,8 @@ description: Emtop Embedded Solutions "^eeti,.*": description: eGalax_eMPIA Technology Inc + "^egnite,.*": + description: egnite GmbH "^einfochips,.*": description: Einfochips "^eink,.*": @@ -485,8 +497,12 @@ description: Empire Electronix "^emtrion,.*": description: emtrion GmbH + "^enbw,.*": + description: Energie Baden-Württemberg AG "^enclustra,.*": description: Enclustra GmbH + "^endian,.*": + description: Endian SRL "^endless,.*": description: Endless Mobile, Inc. "^ene,.*": @@ -554,6 +570,8 @@ description: FocalTech Systems Co.,Ltd "^forlinx,.*": description: Baoding Forlinx Embedded Technology Co., Ltd. + "^foxlink,.*": + description: Foxlink Group "^freebox,.*": description: Freebox SAS "^freecom,.*": @@ -642,6 +660,10 @@ description: Haoyu Microelectronic Co. Ltd. "^hardkernel,.*": description: Hardkernel Co., Ltd + "^hce,.*": + description: HCE Engineering SRL + "^headacoustics,.*": + description: HEAD acoustics "^hechuang,.*": description: Shenzhen Hechuang Intelligent Co. "^hideep,.*": @@ -725,6 +747,8 @@ description: Shenzhen INANBO Electronic Technology Co., Ltd. "^incircuit,.*": description: In-Circuit GmbH + "^incostartec,.*": + description: INCOstartec GmbH "^indiedroid,.*": description: Indiedroid "^inet-tek,.*": @@ -933,6 +957,8 @@ description: Maxim Integrated Products "^maxlinear,.*": description: MaxLinear Inc. + "^maxtor,.*": + description: Maxtor Corporation "^mbvl,.*": description: Mobiveil Inc. "^mcube,.*": @@ -1096,6 +1122,8 @@ description: Nordic Semiconductor "^nothing,.*": description: Nothing Technology Limited + "^novatech,.*": + description: NovaTech Automation "^novatek,.*": description: Novatek "^novtech,.*": @@ -1191,6 +1219,8 @@ description: Pervasive Displays, Inc. "^phicomm,.*": description: PHICOMM Co., Ltd. + "^phontech,.*": + description: Phontech "^phytec,.*": description: PHYTEC Messtechnik GmbH "^picochip,.*": @@ -1275,6 +1305,8 @@ description: Ramtron International "^raspberrypi,.*": description: Raspberry Pi Foundation + "^raumfeld,.*": + description: Raumfeld GmbH "^raydium,.*": description: Raydium Semiconductor Corp. "^rda,.*": @@ -1313,6 +1345,8 @@ description: ROHM Semiconductor Co., Ltd "^ronbo,.*": description: Ronbo Electronics + "^ronetix,.*": + description: Ronetix GmbH "^roofull,.*": description: Shenzhen Roofull Technology Co, Ltd "^roseapplepi,.*": @@ -1339,8 +1373,12 @@ description: Schindler "^schneider,.*": description: Schneider Electric + "^schulercontrol,.*": + description: Schuler Group "^sciosense,.*": description: ScioSense B.V. + "^sdmc,.*": + description: SDMC Technology Co., Ltd "^seagate,.*": description: Seagate Technology PLC "^seeed,.*": @@ -1379,6 +1417,8 @@ description: Si-En Technology Ltd. "^si-linux,.*": description: Silicon Linux Corporation + "^sielaff,.*": + description: Sielaff GmbH & Co. "^siemens,.*": description: Siemens AG "^sifive,.*": @@ -1447,6 +1487,8 @@ description: SolidRun "^solomon,.*": description: Solomon Systech Limited + "^somfy,.*": + description: Somfy Systems Inc. "^sony,.*": description: Sony Corporation "^sophgo,.*": @@ -1517,6 +1559,8 @@ "^synopsys,.*": description: Synopsys, Inc. (deprecated, use snps) deprecated: true + "^taos,.*": + description: Texas Advanced Optoelectronic Solutions Inc. "^tbs,.*": description: TBS Technologies "^tbs-biometrics,.*": @@ -1547,6 +1591,8 @@ description: Teltonika Networks "^tempo,.*": description: Tempo Semiconductor + "^tenda,.*": + description: Shenzhen Tenda Technology Co., Ltd. "^terasic,.*": description: Terasic Inc. "^tesla,.*": @@ -1650,6 +1696,8 @@ description: V3 Semiconductor "^vaisala,.*": description: Vaisala + "^valve,.*": + description: Valve Corporation "^vamrs,.*": description: Vamrs Ltd. "^variscite,.*": @@ -1750,6 +1798,8 @@ description: Extreme Engineering Solutions (X-ES) "^xiaomi,.*": description: Xiaomi Technology Co., Ltd. + "^xicor,.*": + description: Xicor Inc. "^xillybus,.*": description: Xillybus Ltd. "^xingbangda,.*": --- linux-riscv-6.17-6.17.0.orig/Documentation/hwmon/g762.rst +++ linux-riscv-6.17-6.17.0/Documentation/hwmon/g762.rst @@ -17,7 +17,7 @@ Note that those entries do not provide ways to setup the specific hardware characteristics of the system (reference clock, pulses per fan revolution, ...); Those can be modified via devicetree bindings -documented in Documentation/devicetree/bindings/hwmon/g762.txt or +documented in Documentation/devicetree/bindings/hwmon/gmt,g762.yaml or using a specific platform_data structure in board initialization file (see include/linux/platform_data/g762.h). --- linux-riscv-6.17-6.17.0.orig/Documentation/iio/ad3552r.rst +++ linux-riscv-6.17-6.17.0/Documentation/iio/ad3552r.rst @@ -64,7 +64,8 @@ Usage examples -------------- -. code-block:: bash +.. code-block:: bash + root:/sys/bus/iio/devices/iio:device0# cat data_source normal root:/sys/bus/iio/devices/iio:device0# echo -n ramp-16bit > data_source --- linux-riscv-6.17-6.17.0.orig/Documentation/netlink/specs/dpll.yaml +++ linux-riscv-6.17-6.17.0/Documentation/netlink/specs/dpll.yaml @@ -599,6 +599,8 @@ reply: &pin-attrs attributes: - id + - module-name + - clock-id - board-label - panel-label - package-label --- linux-riscv-6.17-6.17.0.orig/Documentation/netlink/specs/fou.yaml +++ linux-riscv-6.17-6.17.0/Documentation/netlink/specs/fou.yaml @@ -52,7 +52,7 @@ name: local-v6 type: binary checks: - min-len: 16 + exact-len: 16 - name: peer-v4 type: u32 @@ -60,7 +60,7 @@ name: peer-v6 type: binary checks: - min-len: 16 + exact-len: 16 - name: peer-port type: u16 --- linux-riscv-6.17-6.17.0.orig/Documentation/networking/seg6-sysctl.rst +++ linux-riscv-6.17-6.17.0/Documentation/networking/seg6-sysctl.rst @@ -25,6 +25,9 @@ Default is 0. +/proc/sys/net/ipv6/seg6_* variables: +==================================== + seg6_flowlabel - INTEGER Controls the behaviour of computing the flowlabel of outer IPv6 header in case of SR T.encaps --- linux-riscv-6.17-6.17.0.orig/Documentation/process/2.Process.rst +++ linux-riscv-6.17-6.17.0/Documentation/process/2.Process.rst @@ -104,8 +104,10 @@ of them are serious. Once a stable release is made, its ongoing maintenance is passed off to the -"stable team," currently Greg Kroah-Hartman. The stable team will release -occasional updates to the stable release using the 5.x.y numbering scheme. +"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The +stable team will release occasional updates to the stable release using the +5.x.y numbering scheme. + To be considered for an update release, a patch must (1) fix a significant bug, and (2) already be merged into the mainline for the next development kernel. Kernels will typically receive stable updates for a little more --- linux-riscv-6.17-6.17.0.orig/Documentation/sphinx/cdomain.py +++ linux-riscv-6.17-6.17.0/Documentation/sphinx/cdomain.py @@ -38,12 +38,29 @@ import sphinx from sphinx import addnodes -from sphinx.domains.c import c_funcptr_sig_re, c_sig_re from sphinx.domains.c import CObject as Base_CObject from sphinx.domains.c import CDomain as Base_CDomain from itertools import chain import re +# fixes https://github.com/sphinx-doc/sphinx/commit/0f49e30c51b5cc5055cda5b4b294c2dd9d1df573#r38750737 + +# pylint: disable=invalid-name +c_sig_re = re.compile( + r'''^([^(]*?) # return type + ([\w:.]+) \s* # thing name (colon allowed for C++) + (?: \((.*)\) )? # optionally arguments + (\s+const)? $ # const specifier + ''', re.VERBOSE) + +c_funcptr_sig_re = re.compile( + r'''^([^(]+?) # return type + (\( [^()]+ \)) \s* # name in parentheses + \( (.*) \) # arguments + (\s+const)? $ # const specifier + ''', re.VERBOSE) +# pylint: enable=invalid-name + __version__ = '1.1' # Namespace to be prepended to the full name --- linux-riscv-6.17-6.17.0.orig/Documentation/sphinx/kernel_feat.py +++ linux-riscv-6.17-6.17.0/Documentation/sphinx/kernel_feat.py @@ -40,9 +40,11 @@ from docutils import nodes, statemachine from docutils.statemachine import ViewList from docutils.parsers.rst import directives, Directive -from docutils.utils.error_reporting import ErrorString from sphinx.util.docutils import switch_source_input +def ErrorString(exc): # Shamelessly stolen from docutils + return f'{exc.__class__.__name}: {exc}' + __version__ = '1.0' def setup(app): --- linux-riscv-6.17-6.17.0.orig/Documentation/sphinx/kernel_include.py +++ linux-riscv-6.17-6.17.0/Documentation/sphinx/kernel_include.py @@ -35,13 +35,15 @@ import os.path from docutils import io, nodes, statemachine -from docutils.utils.error_reporting import SafeString, ErrorString from docutils.parsers.rst import directives from docutils.parsers.rst.directives.body import CodeBlock, NumberLines from docutils.parsers.rst.directives.misc import Include __version__ = '1.0' +def ErrorString(exc): # Shamelessly stolen from docutils + return f'{exc.__class__.__name}: {exc}' + # ============================================================================== def setup(app): # ============================================================================== @@ -112,7 +114,7 @@ raise self.severe('Problems with "%s" directive path:\n' 'Cannot encode input file path "%s" ' '(wrong locale?).' % - (self.name, SafeString(path))) + (self.name, path)) except IOError as error: raise self.severe('Problems with "%s" directive path:\n%s.' % (self.name, ErrorString(error))) --- linux-riscv-6.17-6.17.0.orig/Documentation/sphinx/maintainers_include.py +++ linux-riscv-6.17-6.17.0/Documentation/sphinx/maintainers_include.py @@ -22,10 +22,12 @@ import os.path from docutils import statemachine -from docutils.utils.error_reporting import ErrorString from docutils.parsers.rst import Directive from docutils.parsers.rst.directives.misc import Include +def ErrorString(exc): # Shamelessly stolen from docutils + return f'{exc.__class__.__name}: {exc}' + __version__ = '1.0' def setup(app): --- linux-riscv-6.17-6.17.0.orig/Documentation/trace/histogram-design.rst +++ linux-riscv-6.17-6.17.0/Documentation/trace/histogram-design.rst @@ -380,7 +380,9 @@ trigger above. sched_waking histogram -----------------------:: +---------------------- + +.. code-block:: +------------------+ | hist_data |<-------------------------------------------------------+ --- linux-riscv-6.17-6.17.0.orig/Documentation/wmi/driver-development-guide.rst +++ linux-riscv-6.17-6.17.0/Documentation/wmi/driver-development-guide.rst @@ -54,6 +54,7 @@ :: static const struct wmi_device_id foo_id_table[] = { + /* Only use uppercase letters! */ { "936DA01F-9ABD-4D9D-80C7-02AF85C822A8", NULL }, { } }; --- linux-riscv-6.17-6.17.0.orig/Kbuild +++ linux-riscv-6.17-6.17.0/Kbuild @@ -98,3 +98,4 @@ obj-y += virt/ obj-y += $(ARCH_DRIVERS) obj-$(CONFIG_DRM_HEADER_TEST) += include/ +obj-y += ubuntu/ --- linux-riscv-6.17-6.17.0.orig/Kconfig +++ linux-riscv-6.17-6.17.0/Kconfig @@ -19,6 +19,8 @@ source "drivers/Kconfig" +source "ubuntu/Kconfig" + source "fs/Kconfig" source "security/Kconfig" --- linux-riscv-6.17-6.17.0.orig/MAINTAINERS +++ linux-riscv-6.17-6.17.0/MAINTAINERS @@ -199,6 +199,18 @@ F: Documentation/devicetree/bindings/power/supply/*ab8500* F: drivers/power/supply/*ab8500* +AAEON DEVICE DRIVER WITH WMI INTERFACE +M: Edward Lin +M: Kunyang Fan +M: Frank Hsieh +M: Jacob Wu +S: Supported +F: drivers/gpio/gpio-aaeon.c +F: drivers/hwmon/hwmon-aaeon.c +F: drivers/leds/leds-aaeon.c +F: drivers/mfd/mfd-aaeon.c +F: drivers/watchdog/wdt_aaeon.c + ABI/API L: linux-api@vger.kernel.org F: include/linux/syscalls.h @@ -1133,6 +1145,31 @@ F: drivers/iommu/amd/ F: include/linux/amd-iommu.h +AMD ISP4 DRIVER +M: Bin Du +M: Nirujogi Pratap +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media.git +F: Documentation/admin-guide/media/amdisp4-1.rst +F: Documentation/admin-guide/media/amdisp4.dot +F: drivers/media/platform/amd/Kconfig +F: drivers/media/platform/amd/Makefile +F: drivers/media/platform/amd/isp4/Kconfig +F: drivers/media/platform/amd/isp4/Makefile +F: drivers/media/platform/amd/isp4/isp4.c +F: drivers/media/platform/amd/isp4/isp4.h +F: drivers/media/platform/amd/isp4/isp4_debug.c +F: drivers/media/platform/amd/isp4/isp4_debug.h +F: drivers/media/platform/amd/isp4/isp4_fw_cmd_resp.h +F: drivers/media/platform/amd/isp4/isp4_hw_reg.h +F: drivers/media/platform/amd/isp4/isp4_interface.c +F: drivers/media/platform/amd/isp4/isp4_interface.h +F: drivers/media/platform/amd/isp4/isp4_subdev.c +F: drivers/media/platform/amd/isp4/isp4_subdev.h +F: drivers/media/platform/amd/isp4/isp4_video.c +F: drivers/media/platform/amd/isp4/isp4_video.h + AMD KFD M: Felix Kuehling L: amd-gfx@lists.freedesktop.org @@ -13893,6 +13930,12 @@ S: Maintained F: drivers/platform/x86/lenovo/wmi-hotkey-utilities.c +LENOVO YOGA SLIM 7X EC DRIVER +M: Maya Matuszczyk +S: Maintained +F: Documentation/devicetree/bindings/platform/lenovo,yoga-slim7x-ec.yaml +F: drivers/platform/arm64/lenovo-yoga-slim7x.c + LETSKETCH HID TABLET DRIVER M: Hans de Goede L: linux-input@vger.kernel.org @@ -18954,6 +18997,13 @@ F: drivers/i2c/busses/i2c-ocores.c F: include/linux/platform_data/i2c-ocores.h +OPENCORES PWM DRIVER +M: William Qiu +M: Hal Feng +S: Supported +F: Documentation/devicetree/bindings/pwm/opencores,pwm.yaml +F: drivers/pwm/pwm-ocores.c + OPENRISC ARCHITECTURE M: Jonas Bonn M: Stefan Kristiansson @@ -21677,7 +21727,7 @@ F: Documentation/devicetree/bindings/iommu/riscv,iommu.yaml F: drivers/iommu/riscv/ -RISC-V MICROCHIP FPGA SUPPORT +RISC-V MICROCHIP SUPPORT M: Conor Dooley M: Daire McNamara L: linux-riscv@lists.infradead.org @@ -21687,6 +21737,9 @@ F: Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml F: Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml F: Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +F: Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml +F: Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-mssio.yaml +F: Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml F: Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml F: Documentation/devicetree/bindings/riscv/microchip.yaml F: Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -21700,9 +21753,14 @@ F: drivers/i2c/busses/i2c-microchip-corei2c.c F: drivers/mailbox/mailbox-mpfs.c F: drivers/pci/controller/plda/pcie-microchip-host.c +F: drivers/pinctrl/microchip/pinctrl-mpfs-iomux0.c +F: drivers/pinctrl/microchip/pinctrl-mpfs-mssio.c +F: drivers/pinctrl/microchip/pinctrl-pic64gx-gpio2.c F: drivers/pwm/pwm-microchip-core.c F: drivers/reset/reset-mpfs.c F: drivers/rtc/rtc-mpfs.c +F: drivers/soc/microchip/mpfs-control-scb.c +F: drivers/soc/microchip/mpfs-mss-top-sysreg.c F: drivers/soc/microchip/mpfs-sys-controller.c F: drivers/spi/spi-microchip-core-qspi.c F: drivers/spi/spi-microchip-core.c --- linux-riscv-6.17-6.17.0.orig/Makefile +++ linux-riscv-6.17-6.17.0/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 6 PATCHLEVEL = 17 -SUBLEVEL = 0 +SUBLEVEL = 13 EXTRAVERSION = NAME = Baby Opossum Posse @@ -581,6 +581,9 @@ -I$(objtree)/include \ $(USERINCLUDE) +# UBUNTU: Include our third party driver stuff too +LINUXINCLUDE += -I$(srctree)/ubuntu/include + KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE KBUILD_CFLAGS := @@ -1361,8 +1364,9 @@ quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include cmd_headers_install = \ mkdir -p $(INSTALL_HDR_PATH); \ - rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ - usr/include $(INSTALL_HDR_PATH) + find usr/include -type f -name '*.h' -print0 | \ + tar -czf - --null --no-recursion --no-wildcards-match-slash -T- | \ + tar -xzf - --strip-components=1 -C $(INSTALL_HDR_PATH) PHONY += headers_install headers_install: headers @@ -1379,6 +1383,7 @@ else $(Q)$(MAKE) $(hdr-inst)=include/uapi $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi + $(Q)$(MAKE) $(hdr-inst)=ubuntu/include dst=include oldheaders= endif ifdef CONFIG_HEADERS_INSTALL @@ -1444,11 +1449,11 @@ tools/: FORCE $(Q)mkdir -p $(objtree)/tools - $(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ + $(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ tools/%: FORCE $(Q)mkdir -p $(objtree)/tools - $(Q)$(MAKE) LDFLAGS= O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* + $(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* # --------------------------------------------------------------------------- # Kernel selftest @@ -1585,7 +1590,7 @@ # Directories & files removed with 'make mrproper' MRPROPER_FILES += include/config include/generated \ arch/$(SRCARCH)/include/generated .objdiff \ - debian snap tar-install PKGBUILD pacman \ + snap tar-install PKGBUILD pacman \ .config .config.old .version \ Module.symvers \ certs/signing_key.pem \ --- linux-riscv-6.17-6.17.0.orig/Ubuntu.md +++ linux-riscv-6.17-6.17.0/Ubuntu.md @@ -0,0 +1,8 @@ +Name: linux-riscv-6.17 +Version: 6.17.0 +Series: 24.04 (noble) +Description: + This is the source code for the Ubuntu linux kernel for the 24.04 series. This + source tree is used to produce the flavours: generic. + This kernel is configured to support the widest range of desktop, laptop and + server configurations. --- linux-riscv-6.17-6.17.0.orig/arch/Kconfig +++ linux-riscv-6.17-6.17.0/arch/Kconfig @@ -917,6 +917,7 @@ def_bool y depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG depends on RUSTC_VERSION >= 107900 + depends on ARM64 || X86_64 # With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373 depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \ (!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS) --- linux-riscv-6.17-6.17.0.orig/arch/alpha/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/alpha/kernel/asm-offsets.c @@ -4,6 +4,7 @@ * This code generates raw asm output which is post-processed to extract * and format the required data. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/alpha/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/alpha/kernel/process.c @@ -231,7 +231,7 @@ */ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; extern void ret_from_fork(void); --- linux-riscv-6.17-6.17.0.orig/arch/arc/include/asm/bitops.h +++ linux-riscv-6.17-6.17.0/arch/arc/include/asm/bitops.h @@ -133,6 +133,8 @@ */ static inline __attribute__ ((const)) unsigned long __fls(unsigned long x) { + if (__builtin_constant_p(x)) + return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0; /* FLS insn has exactly same semantics as the API */ return __builtin_arc_fls(x); } --- linux-riscv-6.17-6.17.0.orig/arch/arc/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/arc/kernel/asm-offsets.c @@ -2,6 +2,7 @@ /* * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/arc/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/arc/kernel/process.c @@ -166,7 +166,7 @@ */ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct pt_regs *c_regs; /* child's pt_regs */ --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts @@ -55,8 +55,8 @@ mdio { /delete-node/ switch@1e; - bcm54210e: ethernet-phy@0 { - reg = <0>; + bcm54210e: ethernet-phy@25 { + reg = <25>; }; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts @@ -502,6 +502,9 @@ compatible = "asahi-kasei,ak8974"; reg = <0xe>; + interrupt-parent = <&gpio>; + interrupts = ; + avdd-supply = <&vdd_3v3_sys>; dvdd-supply = <&vdd_1v8_sys>; @@ -515,7 +518,7 @@ reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = ; + interrupts = ; gpio-controller; #gpio-cells = <2>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts @@ -108,8 +108,8 @@ i2c@7000c400 { touchscreen@20 { rmi4-f11@11 { - syna,clip-x-high = <1110>; - syna,clip-y-high = <1973>; + syna,clip-x-high = <1440>; + syna,clip-y-high = <2560>; touchscreen-inverted-y; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts @@ -259,7 +259,7 @@ pinctrl-0 = <&pinctrl_audmux>; status = "okay"; - ssi2 { + mux-ssi2 { fsl,audmux-port = <1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_SYN | @@ -271,7 +271,7 @@ >; }; - aud3 { + mux-aud3 { fsl,audmux-port = <2>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -339,7 +339,7 @@ #sound-dai-cells = <0>; compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; reg = <0x02030000 0x4000>; - interrupts = ; + interrupts = ; clocks = <&clks IMX6UL_CLK_SAI3_IPG>, <&clks IMX6UL_CLK_SAI3>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts @@ -136,7 +136,7 @@ interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - report-rate-hz = <6>; + report-rate-hz = <60>; /* settings valid only for Hycon touchscreen */ touchscreen-size-x = <1280>; touchscreen-size-y = <800>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -289,7 +289,7 @@ }; can0_pins: can0 { - groups = "can0_data"; + groups = "can0_data_b"; function = "can0"; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -373,7 +373,6 @@ port@3 { reg = <3>; adv7180_out: endpoint { - bus-width = <8>; remote-endpoint = <&vin1ep>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts @@ -308,8 +308,6 @@ &switch { status = "okay"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/samsung/exynos4210-i9100.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/samsung/exynos4210-i9100.dts @@ -853,6 +853,7 @@ #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&vtf_reg>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/samsung/exynos4210-trats.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/samsung/exynos4210-trats.dts @@ -518,6 +518,7 @@ #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&tflash_reg>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts @@ -610,6 +610,7 @@ #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&ldo5_reg>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi @@ -1440,6 +1440,7 @@ #address-cells = <1>; #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts @@ -239,7 +239,7 @@ i2s1_port: port { i2s1_endpoint: endpoint { - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; remote-endpoint = <&codec_endpoint>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -185,13 +185,13 @@ interrupt-parent = <&gpioi>; vio-supply = <&v3v3>; vcc-supply = <&v3v3>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; st,ave-ctrl = <1>; st,touch-det-delay = <2>; st,settling = <2>; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi @@ -269,7 +269,7 @@ vcc7-supply = <&vbat>; vccio-supply = <&vbat>; - ti,en-ck32k-xtal = <1>; + ti,en-ck32k-xtal; regulators { vrtc_reg: regulator@0 { --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts @@ -483,8 +483,6 @@ op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; - /* 16 serializers */ - num-serializer = <16>; serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 >; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts @@ -222,10 +222,10 @@ "ModeA1", "ModeA2", "ModeA3", - "NC", - "NC", - "NC", - "NC", + "ModeB0", + "ModeB1", + "ModeB2", + "ModeB3", "NC", "NC", "NC", --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts @@ -291,7 +291,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi @@ -65,7 +65,7 @@ ti,debounce-max = /bits/ 16 <10>; ti,debounce-tol = /bits/ 16 <5>; ti,debounce-rep = /bits/ 16 <1>; - ti,keep-vref-on = <1>; + ti,keep-vref-on; ti,settle-delay-usec = /bits/ 16 <150>; wakeup-source; --- linux-riscv-6.17-6.17.0.orig/arch/arm/boot/dts/ti/omap/omap3-n900.dts +++ linux-riscv-6.17-6.17.0/arch/arm/boot/dts/ti/omap/omap3-n900.dts @@ -508,7 +508,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm/crypto/Kconfig +++ linux-riscv-6.17-6.17.0/arch/arm/crypto/Kconfig @@ -4,7 +4,7 @@ config CRYPTO_CURVE25519_NEON tristate - depends on KERNEL_MODE_NEON + depends on KERNEL_MODE_NEON && !CPU_BIG_ENDIAN select CRYPTO_KPP select CRYPTO_LIB_CURVE25519_GENERIC select CRYPTO_ARCH_HAVE_LIB_CURVE25519 --- linux-riscv-6.17-6.17.0.orig/arch/arm/include/asm/word-at-a-time.h +++ linux-riscv-6.17-6.17.0/arch/arm/include/asm/word-at-a-time.h @@ -67,7 +67,7 @@ */ static inline unsigned long load_unaligned_zeropad(const void *addr) { - unsigned long ret, offset; + unsigned long ret, tmp; /* Load word from unaligned pointer addr */ asm( @@ -75,9 +75,9 @@ "2:\n" " .pushsection .text.fixup,\"ax\"\n" " .align 2\n" - "3: and %1, %2, #0x3\n" - " bic %2, %2, #0x3\n" - " ldr %0, [%2]\n" + "3: bic %1, %2, #0x3\n" + " ldr %0, [%1]\n" + " and %1, %2, #0x3\n" " lsl %1, %1, #0x3\n" #ifndef __ARMEB__ " lsr %0, %0, %1\n" @@ -90,7 +90,7 @@ " .align 3\n" " .long 1b, 3b\n" " .popsection" - : "=&r" (ret), "=&r" (offset) + : "=&r" (ret), "=&r" (tmp) : "r" (addr), "Qo" (*(unsigned long *)addr)); return ret; --- linux-riscv-6.17-6.17.0.orig/arch/arm/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/arm/kernel/asm-offsets.c @@ -7,6 +7,8 @@ * This code generates raw asm output which is post-processed to extract * and format the required data. */ +#define COMPILE_OFFSETS + #include #include #include --- linux-riscv-6.17-6.17.0.orig/arch/arm/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/arm/kernel/process.c @@ -234,7 +234,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long stack_start = args->stack; unsigned long tls = args->tls; struct thread_info *thread = task_thread_info(p); --- linux-riscv-6.17-6.17.0.orig/arch/arm/mach-at91/pm_suspend.S +++ linux-riscv-6.17-6.17.0/arch/arm/mach-at91/pm_suspend.S @@ -689,6 +689,10 @@ bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID str tmp2, [pmc, #AT91_PMC_PLL_UPDT] + /* save acr */ + ldr tmp2, [pmc, #AT91_PMC_PLL_ACR] + str tmp2, .saved_acr + /* save div. */ mov tmp1, #0 ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL0] @@ -758,7 +762,7 @@ str tmp1, [pmc, #AT91_PMC_PLL_UPDT] /* step 2. */ - ldr tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA + ldr tmp1, .saved_acr str tmp1, [pmc, #AT91_PMC_PLL_ACR] /* step 3. */ @@ -904,7 +908,7 @@ /** * at91_mckx_ps_restore: restore MCKx settings * - * Side effects: overwrites tmp1, tmp2 + * Side effects: overwrites tmp1, tmp2 and tmp3 */ .macro at91_mckx_ps_restore #ifdef CONFIG_SOC_SAMA7 @@ -980,7 +984,7 @@ bic tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK orr tmp3, tmp3, tmp1 orr tmp3, tmp3, #AT91_PMC_MCR_V2_CMD - str tmp2, [pmc, #AT91_PMC_MCR_V2] + str tmp3, [pmc, #AT91_PMC_MCR_V2] wait_mckrdy tmp1 @@ -1207,6 +1211,8 @@ #endif .saved_mckr: .word 0 +.saved_acr: + .word 0 .saved_pllar: .word 0 .saved_sam9_lpr: --- linux-riscv-6.17-6.17.0.orig/arch/arm/mach-omap2/am33xx-restart.c +++ linux-riscv-6.17-6.17.0/arch/arm/mach-omap2/am33xx-restart.c @@ -2,12 +2,46 @@ /* * am33xx-restart.c - Code common to all AM33xx machines. */ +#include +#include #include #include #include "common.h" +#include "control.h" #include "prm.h" +/* + * Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before + * ICEPick Samples + * + * If EMU0/EMU1 pins have been used as GPIO outputs and actively driving low + * level, the device might not reboot in normal mode. We are in a bad position + * to override GPIO state here, so just switch the pins into EMU input mode + * (that's what reset will do anyway) and wait a bit, because the state will be + * latched 190 ns after reset. + */ +static void am33xx_advisory_1_0_36(void) +{ + u32 emu0 = omap_ctrl_readl(AM335X_PIN_EMU0); + u32 emu1 = omap_ctrl_readl(AM335X_PIN_EMU1); + + /* If both pins are in EMU mode, nothing to do */ + if (!(emu0 & 7) && !(emu1 & 7)) + return; + + /* Switch GPIO3_7/GPIO3_8 into EMU0/EMU1 modes respectively */ + omap_ctrl_writel(emu0 & ~7, AM335X_PIN_EMU0); + omap_ctrl_writel(emu1 & ~7, AM335X_PIN_EMU1); + + /* + * Give pull-ups time to load the pin/PCB trace capacity. + * 5 ms shall be enough to load 1 uF (would be huge capacity for these + * pins) with TI-recommended 4k7 external pull-ups. + */ + mdelay(5); +} + /** * am33xx_restart - trigger a software restart of the SoC * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c @@ -18,6 +52,8 @@ */ void am33xx_restart(enum reboot_mode mode, const char *cmd) { + am33xx_advisory_1_0_36(); + /* TODO: Handle cmd if necessary */ prm_reboot_mode = mode; --- linux-riscv-6.17-6.17.0.orig/arch/arm/mach-omap2/pm33xx-core.c +++ linux-riscv-6.17-6.17.0/arch/arm/mach-omap2/pm33xx-core.c @@ -388,12 +388,15 @@ if (!state_node) break; - if (!of_device_is_available(state_node)) + if (!of_device_is_available(state_node)) { + of_node_put(state_node); continue; + } if (i == CPUIDLE_STATE_MAX) { pr_warn("%s: cpuidle states reached max possible\n", __func__); + of_node_put(state_node); break; } @@ -403,6 +406,7 @@ states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 | WFI_FLAG_FLUSH_CACHE; + of_node_put(state_node); state_count++; } --- linux-riscv-6.17-6.17.0.orig/arch/arm64/Kconfig +++ linux-riscv-6.17-6.17.0/arch/arm64/Kconfig @@ -1138,6 +1138,7 @@ * ARM Neoverse-V1 erratum 3324341 * ARM Neoverse V2 erratum 3324336 * ARM Neoverse-V3 erratum 3312417 + * ARM Neoverse-V3AE erratum 3312417 On affected cores "MSR SSBS, #0" instructions may not affect subsequent speculative instructions, which may permit unexepected @@ -1659,7 +1660,7 @@ # 64K | 29 | 16 | 13 | 13 | config ARCH_FORCE_MAX_ORDER int - default "13" if ARM64_64K_PAGES + default "13" if ARM64_64K_PAGES || (ARCH_THUNDER && ARM64_4K_PAGES) default "11" if ARM64_16K_PAGES default "10" help --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts @@ -6,6 +6,7 @@ #include "sun55i-a523.dtsi" #include +#include / { model = "Radxa Cubie A5E"; @@ -20,11 +21,22 @@ stdout-path = "serial0:115200n8"; }; - ext_osc32k: ext-osc32k-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "ext_osc32k"; + leds { + compatible = "gpio-leds"; + + power-led { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + use-led { + function = LED_FUNCTION_ACTIVITY; + color = ; + gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; }; reg_vcc5v: vcc5v { @@ -75,6 +87,9 @@ ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; + reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts @@ -85,6 +85,9 @@ ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; + reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; }; }; @@ -306,6 +309,14 @@ vcc-pm-supply = <®_aldo3>; }; +&rtc { + clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>, + <&r_ccu CLK_R_AHB>, <&ext_osc32k>; + clock-names = "bus", "hosc", "ahb", "ext-osc32k"; + assigned-clocks = <&rtc CLK_OSC32K>; + assigned-clock-rates = <32768>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts @@ -346,6 +346,14 @@ vcc-pm-supply = <®_bldo2>; }; +&rtc { + clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>, + <&r_ccu CLK_R_AHB>, <&ext_osc32k>; + clock-names = "bus", "hosc", "ahb", "ext-osc32k"; + assigned-clocks = <&rtc CLK_OSC32K>; + assigned-clock-rates = <32768>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -792,7 +792,7 @@ pwm_mn: pwm@54000 { compatible = "amlogic,c3-pwm", "amlogic,meson-s4-pwm"; - reg = <0x0 54000 0x0 0x24>; + reg = <0x0 0x54000 0x0 0x24>; clocks = <&clkc_periphs CLKID_PWM_M>, <&clkc_periphs CLKID_PWM_N>; #pwm-cells = <3>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t6000-j314s.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t6000-j314s.dts @@ -16,3 +16,11 @@ compatible = "apple,j314s", "apple,t6000", "apple,arm-platform"; model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)"; }; + +&wifi0 { + brcm,board-type = "apple,maldives"; +}; + +&bluetooth0 { + brcm,board-type = "apple,maldives"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t6000-j316s.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t6000-j316s.dts @@ -16,3 +16,11 @@ compatible = "apple,j316s", "apple,t6000", "apple,arm-platform"; model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)"; }; + +&wifi0 { + brcm,board-type = "apple,madagascar"; +}; + +&bluetooth0 { + brcm,board-type = "apple,madagascar"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t6001-j314c.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t6001-j314c.dts @@ -16,3 +16,11 @@ compatible = "apple,j314c", "apple,t6001", "apple,arm-platform"; model = "Apple MacBook Pro (14-inch, M1 Max, 2021)"; }; + +&wifi0 { + brcm,board-type = "apple,maldives"; +}; + +&bluetooth0 { + brcm,board-type = "apple,maldives"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t6001-j316c.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t6001-j316c.dts @@ -16,3 +16,11 @@ compatible = "apple,j316c", "apple,t6001", "apple,arm-platform"; model = "Apple MacBook Pro (16-inch, M1 Max, 2021)"; }; + +&wifi0 { + brcm,board-type = "apple,madagascar"; +}; + +&bluetooth0 { + brcm,board-type = "apple,madagascar"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t6001-j375c.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t6001-j375c.dts @@ -16,3 +16,11 @@ compatible = "apple,j375c", "apple,t6001", "apple,arm-platform"; model = "Apple Mac Studio (M1 Max, 2022)"; }; + +&wifi0 { + brcm,board-type = "apple,okinawa"; +}; + +&bluetooth0 { + brcm,board-type = "apple,okinawa"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t6002-j375d.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t6002-j375d.dts @@ -38,6 +38,14 @@ }; }; +&wifi0 { + brcm,board-type = "apple,okinawa"; +}; + +&bluetooth0 { + brcm,board-type = "apple,okinawa"; +}; + /* delete unused always-on power-domains on die 1 */ /delete-node/ &ps_atc2_usb_aon_die1; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi @@ -13,6 +13,7 @@ / { aliases { + bluetooth0 = &bluetooth0; serial0 = &serial0; wifi0 = &wifi0; }; @@ -99,9 +100,18 @@ /* WLAN */ bus-range = <1 1>; wifi0: wifi@0,0 { + compatible = "pci14e4,4433"; reg = <0x10000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ local-mac-address = [00 10 18 00 00 10]; + apple,antenna-sku = "XX"; + }; + + bluetooth0: bluetooth@0,1 { + compatible = "pci14e4,5f71"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-bd-address = [00 00 00 00 00 00]; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t600x-j375.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t600x-j375.dtsi @@ -11,6 +11,8 @@ / { aliases { + bluetooth0 = &bluetooth0; + ethernet0 = ðernet0; serial0 = &serial0; wifi0 = &wifi0; }; @@ -84,9 +86,18 @@ /* WLAN */ bus-range = <1 1>; wifi0: wifi@0,0 { + compatible = "pci14e4,4433"; reg = <0x10000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ local-mac-address = [00 10 18 00 00 10]; + apple,antenna-sku = "XX"; + }; + + bluetooth0: bluetooth@0,1 { + compatible = "pci14e4,5f71"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-bd-address = [00 00 00 00 00 00]; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/apple/t8103-j457.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/apple/t8103-j457.dts @@ -21,6 +21,14 @@ }; }; +/* + * Adjust pcie0's iommu-map to account for the disabled port01. + */ +&pcie0 { + iommu-map = <0x100 &pcie0_dart_0 1 1>, + <0x200 &pcie0_dart_2 1 1>; +}; + &bluetooth0 { brcm,board-type = "apple,santorini"; }; @@ -36,10 +44,10 @@ */ &port02 { - bus-range = <3 3>; + bus-range = <2 2>; status = "okay"; ethernet0: ethernet@0,0 { - reg = <0x30000 0x0 0x0 0x0 0x0>; + reg = <0x20000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ local-mac-address = [00 10 18 00 00 00]; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/broadcom/bcm2712.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/broadcom/bcm2712.dtsi @@ -270,6 +270,9 @@ <0x7fffc000 0x2000>, <0x7fffe000 0x2000>; interrupt-controller; + #address-cells = <0>; + interrupts = ; #interrupt-cells = <3>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -1401,9 +1401,9 @@ clock-names = "oscclk"; }; - sysreg_apm: syscon@174204e0 { + sysreg_apm: syscon@17420000 { compatible = "google,gs101-apm-sysreg", "syscon"; - reg = <0x174204e0 0x1000>; + reg = <0x17420000 0x10000>; }; pmu_system_controller: system-controller@17460000 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -67,7 +67,6 @@ power-domains = <&pd IMX_SC_R_CSI_0>; fsl,channel = <0>; fsl,num-irqs = <32>; - status = "disabled"; }; gpio0_mipi_csi0: gpio@58222000 { @@ -144,7 +143,6 @@ power-domains = <&pd IMX_SC_R_CSI_1>; fsl,channel = <0>; fsl,num-irqs = <32>; - status = "disabled"; }; gpio0_mipi_csi1: gpio@58242000 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -27,8 +27,8 @@ compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x5b050000 0x10000>; interrupt-parent = <&gic>; - interrupts = , - ; + interrupts = , + ; interrupt-names = "macirq", "eth_wake_irq"; clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, <&eqos_lpcg IMX_LPCG_CLK_6>, --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi @@ -54,3 +54,8 @@ interrupt-names = "dma"; }; }; + +&pcieb_ep { + interrupts = ; + interrupt-names = "dma"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -351,17 +351,6 @@ >; }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts @@ -16,11 +16,20 @@ ethernet1 = &eqos; }; - extcon_usbc: usbc { - compatible = "linux,extcon-usb-gpio"; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + label = "Type-C"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_id>; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + type = "micro"; + vbus-supply = <®_usb1_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; }; leds { @@ -230,9 +239,15 @@ hnp-disable; srp-disable; dr_mode = "otg"; - extcon = <&extcon_usbc>; usb-role-switch; + role-switch-default-mode = "peripheral"; status = "okay"; + + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; }; &usb_dwc3_1 { @@ -261,7 +276,6 @@ }; &usb3_phy0 { - vbus-supply = <®_usb1_vbus>; status = "okay"; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -395,13 +395,6 @@ status = "okay"; }; -/* off-board header */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - /* console */ &uart2 { pinctrl-names = "default"; @@ -409,25 +402,6 @@ status = "okay"; }; -/* off-board header */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -/* off-board */ -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <4>; - non-removable; - status = "okay"; - bus-width = <4>; - non-removable; - status = "okay"; -}; - /* eMMC */ &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -523,13 +497,6 @@ >; }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 - >; - }; - pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 @@ -537,24 +504,6 @@ >; }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 - MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 - MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 - MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 - MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 - MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 - MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi @@ -365,17 +365,6 @@ >; }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 - MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 - MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 - MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 - MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 - MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -217,8 +217,8 @@ compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec_mux>; - select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>; - enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_HIGH>; + enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_LOW>; orientation-switch; port { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts @@ -33,7 +33,9 @@ reg_vcc_panel: regulator-vcc-panel { compatible = "regulator-fixed"; - gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vcc_panel>; + gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; @@ -135,6 +137,16 @@ }; &usbotg1 { + adp-disable; + hnp-disable; + srp-disable; + disable-over-current; + dr_mode = "otg"; + usb-role-switch; + status = "okay"; +}; + +&usbotg2 { #address-cells = <1>; #size-cells = <0>; disable-over-current; @@ -147,17 +159,15 @@ }; }; -&usbotg2 { - adp-disable; - hnp-disable; - srp-disable; - disable-over-current; - dr_mode = "otg"; - usb-role-switch; - status = "okay"; -}; - &usdhc2 { vmmc-supply = <®_vdd_3v3>; status = "okay"; }; + +&iomuxc { + pinctrl_reg_vcc_panel: regvccpanelgrp { + fsl,pins = < + MX93_PAD_GPIO_IO21__GPIO2_IO21 0x31e /* PWM_2 */ + >; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts @@ -44,6 +44,7 @@ fan0: pwm-fan { compatible = "pwm-fan"; + fan-supply = <®_vcc_12v>; #cooling-cells = <2>; cooling-levels = <64 128 192 255>; pwms = <&tpm6 0 4000000 PWM_POLARITY_INVERTED>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi @@ -115,7 +115,7 @@ flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <66000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; vcc-supply = <®_1v8>; @@ -617,7 +617,7 @@ fsl,pins = ; }; - pinctrl_tpm5: tpm4grp { + pinctrl_tpm5: tpm5grp { fsl,pins = ; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/freescale/imx95.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -913,7 +913,7 @@ interrupts = ; clocks = <&scmi_clk IMX95_CLK_LPUART7>; clock-names = "ipg"; - dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>; + dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -925,7 +925,7 @@ interrupts = ; clocks = <&scmi_clk IMX95_CLK_LPUART8>; clock-names = "ipg"; - dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>; + dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>; dma-names = "rx", "tx"; status = "disabled"; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt6331.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt6331.dtsi @@ -6,12 +6,12 @@ #include &pwrap { - pmic: mt6331 { + pmic: pmic { compatible = "mediatek,mt6331"; interrupt-controller; #interrupt-cells = <2>; - mt6331regulator: mt6331regulator { + mt6331regulator: regulators { compatible = "mediatek,mt6331-regulator"; mt6331_vdvfs11_reg: buck-vdvfs11 { @@ -258,7 +258,7 @@ }; mt6331_vdig18_reg: ldo-vdig18 { - regulator-name = "dvdd18_dig"; + regulator-name = "vdig18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-ramp-delay = <0>; @@ -266,11 +266,11 @@ }; }; - mt6331rtc: mt6331rtc { + mt6331rtc: rtc { compatible = "mediatek,mt6331-rtc"; }; - mt6331keys: mt6331keys { + mt6331keys: keys { compatible = "mediatek,mt6331-keys"; power { linux,keycodes = ; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts @@ -212,7 +212,7 @@ &mmc0 { /* eMMC controller */ - mediatek,latch-ck = <0x14>; /* hs400 */ + mediatek,latch-ck = <4>; /* hs400 */ mediatek,hs200-cmd-int-delay = <1>; mediatek,hs400-cmd-int-delay = <1>; mediatek,hs400-ds-dly3 = <0x1a>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -428,16 +428,16 @@ }; }; - pcie_phy: t-phy { + pcie_phy: t-phy@11c00000 { compatible = "mediatek,mt7986-tphy", "mediatek,generic-tphy-v2"; - ranges; - #address-cells = <2>; - #size-cells = <2>; + ranges = <0 0 0x11c00000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; status = "disabled"; - pcie_port: pcie-phy@11c00000 { - reg = <0 0x11c00000 0 0x20000>; + pcie_port: pcie-phy@0 { + reg = <0 0x20000>; clocks = <&clk40m>; clock-names = "ref"; #phy-cells = <1>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -580,7 +580,7 @@ pins-clk { pinmux = ; drive-strength = ; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins-rst { @@ -609,13 +609,13 @@ pins-clk { pinmux = ; drive-strength = ; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins-ds { pinmux = ; drive-strength = ; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins-rst { @@ -633,13 +633,13 @@ , ; input-enable; - mediatek,pull-up-adv = <10>; + mediatek,pull-up-adv = <2>; }; pins-clk { pinmux = ; input-enable; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; }; @@ -652,13 +652,13 @@ ; drive-strength = <6>; input-enable; - mediatek,pull-up-adv = <10>; + mediatek,pull-up-adv = <2>; }; pins-clk { pinmux = ; drive-strength = <8>; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; input-enable; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -324,7 +324,7 @@ pins_clk { pinmux = ; drive-strength = ; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins_rst { @@ -353,13 +353,13 @@ pins_clk { pinmux = ; drive-strength = ; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins_ds { pinmux = ; drive-strength = ; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins_rst { @@ -377,13 +377,13 @@ , ; input-enable; - mediatek,pull-up-adv = <10>; + mediatek,pull-up-adv = <2>; }; pins_clk { pinmux = ; input-enable; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; }; pins_pmu { @@ -401,13 +401,13 @@ ; drive-strength = <6>; input-enable; - mediatek,pull-up-adv = <10>; + mediatek,pull-up-adv = <2>; }; pins_clk { pinmux = ; drive-strength = <8>; - mediatek,pull-down-adv = <10>; + mediatek,pull-down-adv = <2>; input-enable; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi @@ -71,14 +71,14 @@ i2c-scl-internal-delay-ns = <10000>; touchscreen: touchscreen@10 { - compatible = "hid-over-i2c"; + compatible = "elan,ekth6915"; reg = <0x10>; interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; - post-power-on-delay-ms = <10>; - hid-descr-addr = <0x0001>; - vdd-supply = <&pp3300_s3>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_s3>; + no-reset-on-power-off; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts @@ -42,3 +42,7 @@ CROS_STD_MAIN_KEYMAP >; }; + +&touchscreen { + compatible = "elan,ekth6a12nay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8188.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -2183,7 +2183,7 @@ }; efuse: efuse@11f20000 { - compatible = "mediatek,mt8188-efuse", "mediatek,efuse"; + compatible = "mediatek,mt8188-efuse", "mediatek,mt8186-efuse"; reg = <0 0x11f20000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1588,9 +1588,6 @@ power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>; - resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>; - reset-names = "mac"; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc0 0>, --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts @@ -352,7 +352,7 @@ LDO_VIN2-supply = <&vsys>; LDO_VIN3-supply = <&vsys>; - mt6360_buck1: BUCK1 { + mt6360_buck1: buck1 { regulator-name = "emi_vdd2"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; @@ -362,7 +362,7 @@ regulator-always-on; }; - mt6360_buck2: BUCK2 { + mt6360_buck2: buck2 { regulator-name = "emi_vddq"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -372,7 +372,7 @@ regulator-always-on; }; - mt6360_ldo1: LDO1 { + mt6360_ldo1: ldo1 { regulator-name = "mt6360_ldo1"; /* Test point */ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -380,7 +380,7 @@ MT6360_OPMODE_LP>; }; - mt6360_ldo2: LDO2 { + mt6360_ldo2: ldo2 { regulator-name = "panel1_p1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -388,7 +388,7 @@ MT6360_OPMODE_LP>; }; - mt6360_ldo3: LDO3 { + mt6360_ldo3: ldo3 { regulator-name = "vmc_pmu"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -396,7 +396,7 @@ MT6360_OPMODE_LP>; }; - mt6360_ldo5: LDO5 { + mt6360_ldo5: ldo5 { regulator-name = "vmch_pmu"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -404,7 +404,7 @@ MT6360_OPMODE_LP>; }; - mt6360_ldo6: LDO6 { + mt6360_ldo6: ldo6 { regulator-name = "mt6360_ldo6"; /* Test point */ regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -412,7 +412,7 @@ MT6360_OPMODE_LP>; }; - mt6360_ldo7: LDO7 { + mt6360_ldo7: ldo7 { regulator-name = "emi_vmddr_en"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts @@ -11,7 +11,7 @@ / { model = "Pumpkin MT8516"; - compatible = "mediatek,mt8516"; + compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516"; memory@40000000 { device_type = "memory"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/Makefile +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/Makefile @@ -315,6 +315,10 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb x1e80100-crd-el2-dtbs := x1e80100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb x1e80100-crd-el2.dtb +x1e80100-dell-inspiron-14-plus-7441-el2-dtbs := x1e80100-dell-inspiron-14-plus-7441.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-inspiron-14-plus-7441.dtb x1e80100-dell-inspiron-14-plus-7441-el2.dtb +x1e80100-dell-latitude-7455-el2-dtbs := x1e80100-dell-latitude-7455.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-latitude-7455.dtb x1e80100-dell-latitude-7455-el2.dtb x1e80100-dell-xps13-9345-el2-dtbs := x1e80100-dell-xps13-9345.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb x1e80100-dell-xps13-9345-el2.dtb x1e80100-hp-elitebook-ultra-g1q-el2-dtbs := x1e80100-hp-elitebook-ultra-g1q.dtb x1-el2.dtbo @@ -329,7 +333,13 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb +x1p42100-acer-swift-go14-01-el2-dtbs := x1p42100-acer-swift-go14-01.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-acer-swift-go14-01.dtb x1p42100-acer-swift-go14-01-el2.dtb x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb +x1p42100-asus-zenbook-a14-lcd-el2-dtbs := x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14-lcd.dtb x1p42100-asus-zenbook-a14-lcd-el2.dtb x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb +x1p64100-acer-swift-sf14-11-el2-dtbs := x1p64100-acer-swift-sf14-11.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p64100-acer-swift-sf14-11.dtb x1p64100-acer-swift-sf14-11-el2.dtb --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1562,6 +1562,8 @@ interrupts = ; + resets = <&gcc GCC_MDSS_BCR>; + interrupt-controller; #interrupt-cells = <1>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -1249,6 +1249,8 @@ power-domains = <&gcc MDSS_GDSC>; + resets = <&gcc GCC_MDSS_BCR>; + #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <1>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3496,6 +3496,9 @@ <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <60000000>; + interconnects = <&pnoc MASTER_USB_HS &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &pnoc SLAVE_USB_HS>; + interconnect-names = "usb-ddr", "apps-usb"; power-domains = <&gcc USB30_GDSC>; qcom,select-utmi-as-pipe-clk; status = "disabled"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -565,6 +565,20 @@ bias-disable; }; + cci0_default: cci0-default-state { + pins = "gpio22", "gpio23"; + function = "cci_i2c"; + drive-strength = <2>; + bias-disable; + }; + + cci1_default: cci1-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <2>; + bias-disable; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; @@ -1454,6 +1468,7 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; + snps,parkmode-disable-ss-quirk; maximum-speed = "super-speed"; dr_mode = "otg"; usb-role-switch; @@ -1628,25 +1643,61 @@ #iommu-cells = <2>; }; - camss: camss@5c6e000 { + cci: cci@5c1b000 { + compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci"; + reg = <0x0 0x5c1b000 0x0 0x1000>; + + interrupts = ; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>; + clock-names = "ahb", "cci"; + assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>; + assigned-clock-rates = <37500000>; + + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; + + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@5c11000 { compatible = "qcom,qcm2290-camss"; - reg = <0x0 0x5c6e000 0x0 0x1000>, + reg = <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6e000 0x0 0x1000>, <0x0 0x5c75000 0x0 0x1000>, <0x0 0x5c52000 0x0 0x1000>, <0x0 0x5c53000 0x0 0x1000>, <0x0 0x5c66000 0x0 0x400>, <0x0 0x5c68000 0x0 0x400>, - <0x0 0x5c11000 0x0 0x1000>, <0x0 0x5c6f000 0x0 0x4000>, <0x0 0x5c76000 0x0 0x4000>; - reg-names = "csid0", + reg-names = "top", + "csid0", "csid1", "csiphy0", "csiphy1", "csitpg0", "csitpg1", - "top", "vfe0", "vfe1"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -47,6 +47,8 @@ stride = <(1224 * 4)>; format = "a8r8g8b8"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + vci-supply = <&vreg_oled_vci>; + dvdd-supply = <&vreg_oled_dvdd>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -118,6 +118,11 @@ no-map; }; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + rmtfs_mem: rmtfs@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/qcs615.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/qcs615.dtsi @@ -631,6 +631,7 @@ interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -654,6 +655,7 @@ "qup-config", "qup-memory"; power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", @@ -681,6 +683,7 @@ "qup-config", "qup-memory"; power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", @@ -703,6 +706,7 @@ interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", @@ -728,6 +732,7 @@ interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -751,6 +756,7 @@ "qup-config", "qup-memory"; power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -648,7 +648,7 @@ &uart3 { /delete-property/ interrupts; interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + <&tlmm 11 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&uart3_default>; pinctrl-1 = <&uart3_sleep>; pinctrl-names = "default", "sleep"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -726,7 +726,7 @@ }; &mdss0_dp0_out { - data-lanes = <0 1>; + data-lanes = <0 1 2 3>; remote-endpoint = <&usb_0_qmpphy_dp_in>; }; @@ -735,7 +735,7 @@ }; &mdss0_dp1_out { - data-lanes = <0 1>; + data-lanes = <0 1 2 3>; remote-endpoint = <&usb_1_qmpphy_dp_in>; }; @@ -1360,6 +1360,7 @@ vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + mode-switch; orientation-switch; status = "okay"; @@ -1397,6 +1398,7 @@ vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; + mode-switch; orientation-switch; status = "okay"; @@ -1471,6 +1473,11 @@ status = "okay"; }; +&venus { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcvss8280.mbn"; + status = "okay"; +}; + &wsamacro { status = "okay"; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -690,6 +691,11 @@ no-map; }; + pil_video_mem: pil_video_region@86700000 { + reg = <0 0x86700000 0 0x500000>; + no-map; + }; + pil_adsp_mem: adsp-region@86c00000 { reg = <0 0x86c00000 0 0x2000000>; no-map; @@ -3798,6 +3804,86 @@ }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sm8350-venus"; + reg = <0 0x0aa00000 0 0x100000>; + interrupts = ; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC8280XP_MX>; + power-domain-names = "venus", + "vcodec0", + "mx"; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "cpu-cfg", + "video-mem", + "video-llcc"; + + operating-points-v2 = <&venus_opp_table>; + iommus = <&apps_smmu 0x2e00 0x400>; + memory-region = <&pil_video_mem>; + + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1098000000 { + opp-hz = /bits/ 64 <1098000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-1332000000 { + opp-hz = /bits/ 64 <1332000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + videocc: clock-controller@abf0000 { + compatible = "qcom,sc8280xp-videocc"; + reg = <0 0x0abf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac4a000 { compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; reg = <0 0x0ac4a000 0 0x1000>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -799,8 +799,8 @@ bias-disable; }; - tri_state_key_default: tri-state-key-default-state { - pins = "gpio40", "gpio42", "gpio26"; + alert_slider_default: alert-slider-default-state { + pins = "gpio126", "gpio52", "gpio24"; function = "gpio"; drive-strength = <2>; bias-disable; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -143,7 +143,7 @@ }; }; - i2c21 { + i2c-21 { compatible = "i2c-gpio"; sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>; scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; @@ -584,15 +584,15 @@ &i2c14 { status = "okay"; - pmic@66 { + max77705: pmic@66 { compatible = "maxim,max77705"; reg = <0x66>; + #interrupt-cells = <1>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; pinctrl-0 = <&pmic_int_default>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; leds { compatible = "maxim,max77705-rgb"; @@ -631,9 +631,8 @@ reg = <0x69>; compatible = "maxim,max77705-charger"; monitored-battery = <&battery>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - + interrupt-parent = <&max77705>; + interrupts = <0>; }; fuel-gauge@36 { @@ -641,8 +640,8 @@ compatible = "maxim,max77705-battery"; power-supplies = <&max77705_charger>; maxim,rsns-microohm = <5000>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <2>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5404,11 +5404,11 @@ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; - num-channels = <31>; + num-channels = <23>; interrupts = ; #dma-cells = <1>; qcom,ee = <1>; - qcom,num-ees = <2>; + qcom,num-ees = <4>; iommus = <&apps_smmu 0x1806 0x0>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -4020,6 +4020,8 @@ iommus = <&apps_smmu 0x60 0>; + dma-coherent; + lanes-per-direction = <2>; qcom,ice = <&ice>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1-acer-swift-14.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1-acer-swift-14.dtsi @@ -0,0 +1,1467 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* +* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. +* Copyright (c) 2024, Linaro Limited +* Copyright (c) 2024, Victorien Alric - vickdu31 +*/ + +#include +#include +#include +#include +#include + +/ { + model = "Acer Swift AI"; + compatible = "acer,swift-14", "qcom,x1e80100"; + chassis-type = "laptop"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Display-adjacent port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* User-adjacent port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-ACER-SWIFT-14"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rtmr1_1p15_reg_en>; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rtmr1_1p8_reg_en>; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rtmr1_3p3_reg_en>; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + + //vdd-supply = <&vreg_misc_3p3>; + //vddl-supply = <&vreg_l12b_1p2>; + + //pinctrl-0 = <&tpad_default>; + //pinctrl-names = "default"; + }; + + /* ELAN06F1 or SYNA06F2 */ + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + clock-names = "xo"; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + clock-names = "xo"; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + /* ILIT2911 or GTCH1563 */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&i2c20 { + clock-frequency = <400000>; + + status = "okay"; + +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + pinctrl-0 = <&edp_hpd_default>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + backlight = <&backlight>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + bias-disable; + }; +}; + +&pm8550ve_9_gpios { + rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; + +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + +&pmc8380_5_gpios { + rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <72 2>, /* Secure EC I2C connection (?) */ + <238 1>; /* UFS Reset */ + + edp_hpd_default: edp-hpd-default-state { + pins = "gpio119"; + function = "edp0_hot"; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts0_default: ts0-default-state { + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + bt_en_default: bt-en-sleep { + pins = "gpio116"; + function = "gpio"; + output-low; + bias-disable; + qcom,drive-strength = <16>; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart14 { + status = "okay"; + bluetooth: bt_wcn7850 { + compatible = "qcom,wcn7850-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb5_repeater>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -985,7 +985,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -994,7 +993,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1004,14 +1002,10 @@ status = "okay"; aux-bus { - panel { + panel: panel { compatible = "edp-panel"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_3p3>; - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; - port { edp_panel_in: endpoint { remote-endpoint = <&mdss_dp3_out>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -17,6 +17,7 @@ aliases { serial0 = &uart21; + serial1 = &uart14; }; wcd938x: audio-codec { @@ -491,6 +492,48 @@ regulator-boot-on; }; + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + vreg_wwan: regulator-wwan { compatible = "regulator-fixed"; @@ -506,6 +549,65 @@ regulator-boot-on; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -1016,6 +1118,27 @@ }; }; +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + + vdd1v8-supply = <&vreg_l4b_1p8>; + vdd3v3-supply = <&vreg_l13b_3p0>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + + #phy-cells = <0>; + }; +}; + &i2c7 { clock-frequency = <400000>; @@ -1128,7 +1251,7 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp1 { @@ -1136,7 +1259,7 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp2 { @@ -1144,7 +1267,7 @@ }; &mdss_dp2_out { - data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp3 { @@ -1206,6 +1329,23 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie5 { perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; @@ -1466,6 +1606,14 @@ bias-disable; }; + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + hall_int_n_default: hall-int-n-state { pins = "gpio92"; function = "gpio"; @@ -1639,6 +1787,20 @@ output-low; }; + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wwan_sw_en: wwan-sw-en-state { pins = "gpio221"; function = "gpio"; @@ -1647,6 +1809,23 @@ }; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; @@ -1747,3 +1926,38 @@ &usb_1_ss2_qmpphy_out { remote-endpoint = <&retimer_ss2_ss_in>; }; + +&usb_mp { + /* Only second port is used with USB 2.0 maximum speed */ + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi @@ -0,0 +1,1664 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024 Aleksandrs Vinarskis + * Copyright (c) 2025 Bryan O'Donoghue + * Copyright (c) 2025 Val Packett + */ + +#include +#include +#include +#include +#include + +#include "x1e80100-pmics.dtsi" + +/ { + chassis-type = "laptop"; + + aliases { + serial0 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <40000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Display-adjacent port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* User-adjacent port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound: sound { + compatible = "qcom,x1e80100-sndcard"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK1 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_cam_1p8: regulator-cam-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_CAM_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam_ldo_en>; + pinctrl-names = "default"; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = ; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = ; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + keyboard@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8833", "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + /* EC @0x3b */ + + /* Type A Port */ + eusb3_typea_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + /* Fingerprint scanner */ + eusb5_frp_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8833", "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c20 { + clock-frequency = <400000>; + + status = "okay"; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l6b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ + <76 4>, /* SPI19 (TZ Protected) */ + <238 1>; /* UFS Reset */ + + cam_rgb_default: cam-rgb-default-state { + mclk-pins { + pins = "gpio100"; + function = "cam_aon"; + drive-strength = <16>; + bias-disable; + }; + + reset-n-pins { + pins = "gpio237"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam_ldo_en: cam-ldo-en-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_bl_en: edp-bl-en-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + tpad_default: tpad-default-state { + disable-pins { + pins = "gpio38"; + function = "gpio"; + output-high; + }; + + int-n-pins { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio52"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + disable-pins { + pins = "gpio75"; + function = "gpio"; + output-high; + }; + + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-pull-up; + }; + + reset-n-pins { + /* Technically should be High-Z input */ + pins = "gpio48"; + function = "gpio"; + output-low; + drive-strength = <2>; + }; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb5_frp_repeater>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_typea_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -983,7 +983,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -992,7 +991,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1001,7 +999,6 @@ }; &mdss_dp2_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts @@ -10,3 +10,11 @@ compatible = "lenovo,thinkpad-t14s-oled", "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100"; }; + +&panel { + compatible = "samsung,atna40yk20", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -20,6 +20,10 @@ compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100"; chassis-type = "laptop"; + aliases { + serial1 = &uart14; + }; + wcd938x: audio-codec { compatible = "qcom,wcd9385-codec"; @@ -62,6 +66,20 @@ }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -321,6 +339,48 @@ regulator-boot-on; }; + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + vreg_wwan: regulator-wwan { compatible = "regulator-fixed"; @@ -415,6 +475,65 @@ }; }; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -994,7 +1113,7 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp1 { @@ -1002,7 +1121,15 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + data-lanes = <0 1 2 3>; }; &mdss_dp3 { @@ -1061,6 +1188,23 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie5 { perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; @@ -1267,6 +1411,13 @@ <72 2>, /* Secure EC I2C connection (?) */ <238 1>; /* UFS Reset */ + + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + eusb3_reset_n: eusb3-reset-n-state { pins = "gpio6"; function = "gpio"; @@ -1450,6 +1601,20 @@ output-low; }; + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wwan_sw_en: wwan-sw-en-state { pins = "gpio221"; function = "gpio"; @@ -1458,6 +1623,23 @@ }; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + &usb_1_ss0_hsphy { vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; @@ -1490,6 +1672,22 @@ remote-endpoint = <&retimer_ss0_ss_in>; }; +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + qcom,combo-initial-mode = "dp"; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&hdmi_con>; +}; + &usb_1_ss1_hsphy { vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -69,7 +69,15 @@ reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -98,7 +106,15 @@ reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -147,6 +163,102 @@ regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -503,18 +615,61 @@ }; }; -&i2c1 { +&i2c3 { clock-frequency = <400000>; status = "okay"; - /* PS8830 USB4 Retimer? @ 0x8 */ -}; + /* Left-side USB Type-C port, closer to the screen */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; -&i2c3 { - clock-frequency = <400000>; - status = "okay"; + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; - /* PS8830 USB4 Retimer? @ 0x8 */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; }; &i2c5 { @@ -583,13 +738,80 @@ clock-frequency = <400000>; status = "okay"; - /* PS8830 USB4 Retimer? @ 0x8 */ + /* Left-side USB Type-C port, farther from the screen */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + + }; + }; }; &mdss { status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { /delete-property/ #sound-dai-cells; @@ -686,6 +908,28 @@ status = "okay"; }; +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; + + rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&pm8550ve_9_gpios { + rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -698,6 +942,14 @@ }; }; +&pmc8380_5_gpios { + rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &qupv3_0 { status = "okay"; }; @@ -843,6 +1095,34 @@ }; }; + rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -917,7 +1197,7 @@ }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -949,7 +1229,7 @@ }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; }; &usb_2 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -12,6 +12,65 @@ / { model = "ASUS Zenbook A14 (UX3407RA)"; compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100"; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &gpu { @@ -22,6 +81,31 @@ firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + }; +}; + +&panel { + compatible = "samsung,atna40cu11", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; +}; + &remoteproc_adsp { firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; @@ -35,3 +119,21 @@ status = "okay"; }; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + + max-speed = <3000000>; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Val Packett + */ +/dts-v1/; + +#include "x1e80100.dtsi" +#include "x1-dell-thena.dtsi" + +/ { + model = "Dell Inspiron 14 Plus 7441"; + compatible = "dell,inspiron-14-plus-7441", "qcom,x1e80100"; +}; + +&sound { + model = "X1E80100-Dell-Inspiron-14p-7441"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcdxkmsuc8380.mbn"; +}; + +&i2c8 { + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcadsp8380.mbn", + "qcom/x1e80100/dell/inspiron-14-plus-7441/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qccdsp8380.mbn", + "qcom/x1e80100/dell/inspiron-14-plus-7441/cdsp_dtbs.elf"; + + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Val Packett + */ +/dts-v1/; + +#include "x1e80100.dtsi" +#include "x1-dell-thena.dtsi" + +/ { + model = "Dell Latitude 7455"; + compatible = "dell,latitude-7455", "qcom,x1e80100"; +}; + +&sound { + model = "X1E80100-Dell-Latitude-7455"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/dell/latitude-7455/qcdxkmsuc8380.mbn"; +}; + +&i2c8 { + /* LXST2021 */ + touchscreen@9 { + compatible = "hid-over-i2c"; + reg = <0x09>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/dell/latitude-7455/qcadsp8380.mbn", + "qcom/x1e80100/dell/latitude-7455/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/dell/latitude-7455/qccdsp8380.mbn", + "qcom/x1e80100/dell/latitude-7455/cdsp_dtbs.elf"; + + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -151,6 +151,53 @@ }; }; + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-Dell-XPS-13-9345"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK1 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb"; + channels-swapped; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vreg_edp_3p3: regulator-edp-3p3 { compatible = "regulator-fixed"; @@ -415,6 +462,13 @@ regulator-initial-mode = ; }; + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + vreg_l2b_3p0: ldo2 { regulator-name = "vreg_l2b_3p0"; regulator-min-microvolt = <3072000>; @@ -875,6 +929,32 @@ }; }; +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + &mdss { status = "okay"; }; @@ -884,7 +964,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -893,7 +972,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1067,6 +1145,68 @@ vdd3-supply = <&vreg_l14b_3p0>; }; +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + &tlmm { gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */ <76 4>, /* SPI19 (TZ Protected) */ --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -1028,7 +1028,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1037,7 +1036,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -18,6 +18,7 @@ aliases { serial0 = &uart21; + serial1 = &uart14; }; chosen { @@ -959,7 +960,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -968,7 +968,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -977,7 +976,6 @@ }; &mdss_dp2_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1239,6 +1237,14 @@ <44 4>, /* SPI (TPM) */ <238 1>; /* UFS Reset */ + bt_en_default: bt-en-sleep { + pins = "gpio116"; + function = "gpio"; + output-low; + bias-disable; + qcom,drive-strength = <16>; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio70"; function = "gpio"; @@ -1405,6 +1411,18 @@ }; }; +&uart14 { + status = "okay"; + + bluetooth: bt_wcn7850 { + compatible = "qcom,wcn7850-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -949,7 +949,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -958,7 +957,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi @@ -475,6 +475,8 @@ #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + pm8010_temp_alarm: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -848,7 +848,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -857,7 +856,6 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -866,7 +864,6 @@ }; &mdss_dp2_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -2856,6 +2856,7 @@ #clock-cells = <1>; #phy-cells = <1>; + mode-switch; orientation-switch; status = "disabled"; @@ -2926,6 +2927,7 @@ #clock-cells = <1>; #phy-cells = <1>; + mode-switch; orientation-switch; status = "disabled"; @@ -2996,6 +2998,7 @@ #clock-cells = <1>; #phy-cells = <1>; + mode-switch; orientation-switch; status = "disabled"; @@ -4859,6 +4862,7 @@ interconnect-names = "usb-ddr", "apps-usb"; + qcom,select-utmi-as-pipe-clk; wakeup-source; status = "disabled"; @@ -4876,15 +4880,8 @@ dma-coherent; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_2_dwc3_hs: endpoint { - }; + port { + usb_2_dwc3_hs: endpoint { }; }; }; @@ -5351,6 +5348,7 @@ reg = <1>; mdss_dp0_out: endpoint { + data-lanes = <0 1 2 3>; remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>; }; }; @@ -5434,6 +5432,7 @@ reg = <1>; mdss_dp1_out: endpoint { + data-lanes = <0 1 2 3>; remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>; }; }; @@ -5516,6 +5515,7 @@ reg = <1>; mdss_dp2_out: endpoint { + data-lanes = <0 1 2 3>; remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1p42100-acer-swift-go14-01.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1p42100-acer-swift-go14-01.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* +* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. +* Copyright (c) 2024, Linaro Limited +*/ + +/dts-v1/; + +#include "x1p42100.dtsi" +#include "x1e80100-pmics.dtsi" +#include "x1-acer-swift-14.dtsi" +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model = "Acer Swift Go 14 AI (SFG14-01)"; + compatible = "acer,swift-go14-01","lenovo,thinkpad-t14s", "qcom,x1p42100", "qcom,x1e80100"; + chassis-type = "laptop"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/ACER/SFG14-01/qcdxkmsuc8380.mbn"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ACER/SFG14-01/qcadsp8380.mbn", + "qcom/x1e80100/ACER/SFG14-01/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ACER/SFG14-01/qccdsp8380.mbn", + "qcom/x1e80100/ACER/SFG14-01/cdsp_dtbs.elf"; + + status = "okay"; +}; + + + --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis + */ + +/dts-v1/; + +#include "x1p42100-asus-zenbook-a14.dtsi" + +/ { + model = "ASUS Zenbook A14 (UX3407QA, LCD)"; + compatible = "asus,zenbook-a14-ux3407qa-lcd", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 416667>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_bl_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&panel { + backlight = <&backlight>; +}; + +&pmc8380_3_gpios { + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts @@ -6,136 +6,17 @@ /dts-v1/; -#include "x1p42100.dtsi" -#include "x1-asus-zenbook-a14.dtsi" - -/delete-node/ &pmc8380_6; -/delete-node/ &pmc8380_6_thermal; +#include "x1p42100-asus-zenbook-a14.dtsi" / { model = "ASUS Zenbook A14 (UX3407QA)"; - compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; - - wcn6855-pmu { - compatible = "qcom,wcn6855-pmu"; - - vddaon-supply = <&vreg_wcn_0p95>; - vddio-supply = <&vreg_wcn_1p9>; - vddpcie1p3-supply = <&vreg_wcn_1p9>; - vddpcie1p9-supply = <&vreg_wcn_1p9>; - vddpmu-supply = <&vreg_wcn_0p95>; - vddpmucx-supply = <&vreg_wcn_0p95>; - vddpmumx-supply = <&vreg_wcn_0p95>; - vddrfa0p95-supply = <&vreg_wcn_0p95>; - vddrfa1p3-supply = <&vreg_wcn_1p9>; - vddrfa1p9-supply = <&vreg_wcn_1p9>; - - bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; - wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; - pinctrl-names = "default"; - - regulators { - vreg_pmu_rfa_cmn_0p8: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn_0p8"; - }; - - vreg_pmu_aon_0p8: ldo1 { - regulator-name = "vreg_pmu_aon_0p8"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p8: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p8"; - }; - - vreg_pmu_btcmx_0p8: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p8"; - }; - - vreg_pmu_pcie_1p8: ldo5 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo6 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_rfa_0p8: ldo7 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo8 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p7: ldo9 { - regulator-name = "vreg_pmu_rfa_1p7"; - }; - }; - }; + compatible = "asus,zenbook-a14-ux3407qa-oled", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; }; -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; -}; - -&pcie4_port0 { - wifi@0 { - compatible = "pci17cb,1103"; - reg = <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - - qcom,calibration-variant = "UX3407Q"; - }; -}; - -&remoteproc_adsp { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", - "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", - "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; - - status = "okay"; -}; - -&uart14 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn6855-bt"; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; +&panel { + compatible = "samsung,atna40ct06", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - max-speed = <3000000>; - }; + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis + */ + +/dts-v1/; + +#include "x1p42100.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model = "ASUS Zenbook A14 (UX3407QA)"; + compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + vddaon-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_wcn_1p9>; + vddpcie1p3-supply = <&vreg_wcn_1p9>; + vddpcie1p9-supply = <&vreg_wcn_1p9>; + vddpmu-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddrfa0p95-supply = <&vreg_wcn_0p95>; + vddrfa1p3-supply = <&vreg_wcn_1p9>; + vddrfa1p9-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + qcom,calibration-variant = "UX3407Q"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + max-speed = <3000000>; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/qcom/x1p64100-acer-swift-sf14-11.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/qcom/x1p64100-acer-swift-sf14-11.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* +* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. +* Copyright (c) 2024, Linaro Limited +*/ + +/dts-v1/; + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" +#include "x1-acer-swift-14.dtsi" + +/ { + model = "Acer Swift 14 AI (SF14-11)"; + compatible = "acer,swift-sf14-11","lenovo,thinkpad-t14s", "qcom,x1p64100", "qcom,x1e80100"; + chassis-type = "laptop"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/ACER/SF14-11/qcdxkmsuc8380.mbn"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ACER/SF14-11/qcadsp8380.mbn", + "qcom/x1e80100/ACER/SF14-11/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ACER/SF14-11/qccdsp8380.mbn", + "qcom/x1e80100/ACER/SF14-11/cdsp_dtbs.elf"; + + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts @@ -118,13 +118,13 @@ }; /* Page 27 / DSI to Display */ - mini-dp-con { + dp-con { compatible = "dp-connector"; label = "CN6"; type = "full-size"; port { - mini_dp_con_in: endpoint { + dp_con_in: endpoint { remote-endpoint = <&sn65dsi86_out>; }; }; @@ -185,7 +185,7 @@ regulator-max-microvolt = <3300000>; gpios = <&gpio8 13 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 0>, <1800000 1>; + states = <1800000 0>, <3300000 1>; }; }; @@ -371,7 +371,7 @@ port@1 { reg = <1>; sn65dsi86_out: endpoint { - remote-endpoint = <&mini_dp_con_in>; + remote-endpoint = <&dp_con_in>; }; }; }; @@ -556,6 +556,10 @@ drive-strength = <21>; }; + pins-vddq18-25-avb { + pins = "PIN_VDDQ_AVB0", "PIN_VDDQ_AVB1", "PIN_VDDQ_AVB2", "PIN_VDDQ_TSN0"; + power-source = <1800>; + }; }; /* Page 28 / CANFD_IF */ --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts @@ -90,10 +90,10 @@ }; &keys { - key-sleep { - pinctrl-0 = <&nmi_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&nmi_pins>; + pinctrl-names = "default"; + key-sleep { interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>; linux,code = ; label = "SLEEP"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -48,7 +48,10 @@ #if (SW_SCIF_CAN || SW_RSPI_CAN) &canfd { pinctrl-0 = <&can1_pins>; - /delete-node/ channel@0; + + channel0 { + status = "disabled"; + }; }; #else &canfd { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi @@ -3,7 +3,7 @@ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd */ -#include "rk3399.dtsi" +#include "rk3399-base.dtsi" / { cluster0_opp: opp-table-0 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi @@ -120,7 +120,7 @@ compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie"; enable-active-high; - gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie_drv>; regulator-always-on; @@ -187,7 +187,7 @@ vcc5v0_usb2b: regulator-vcc5v0-usb2b { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb2b_en>; regulator-name = "vcc5v0_usb2b"; @@ -199,7 +199,7 @@ vcc5v0_usb2t: regulator-vcc5v0-usb2t { compatible = "regulator-fixed"; enable-active-high; - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb2t_en>; regulator-name = "vcc5v0_usb2t"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi @@ -789,7 +789,7 @@ vccio1-supply = <&vccio_acodec>; vccio2-supply = <&vcc_1v8>; vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; + vccio4-supply = <&vcca1v8_pmu>; vccio5-supply = <&vcc_1v8>; vccio6-supply = <&vcc1v8_dvp>; vccio7-supply = <&vcc_3v3>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts @@ -466,6 +466,7 @@ compatible = "belling,bl24c16a", "atmel,24c16"; reg = <0x50>; pagesize = <16>; + vcc-supply = <&vcca1v8_pmu>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts @@ -482,6 +482,8 @@ }; &i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; rockchip,trcm-sync-tx-only; status = "okay"; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts @@ -232,6 +232,20 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_sys>; }; + + vcc_wifi_reg_on: regulator-wifi-reg-on { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&wifi_reg_on>; + pinctrl-names = "default"; + regulator-name = "wifi_reg_on"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_s3>; + }; }; &cpu_l0 { @@ -242,6 +256,10 @@ cpu-supply = <&vdd_cpu_big_s0>; }; +&combphy0_ps { + status = "okay"; +}; + &combphy1_psu { status = "okay"; }; @@ -257,9 +275,6 @@ ð0m0_rgmii_clk ð0m0_rgmii_bus ðm0_clk0_25m_out>; - snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 20000 100000>; tx_delay = <0x21>; status = "okay"; }; @@ -275,9 +290,6 @@ ð1m0_rgmii_clk ð1m0_rgmii_bus ðm0_clk1_25m_out>; - snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 20000 100000>; tx_delay = <0x20>; status = "okay"; }; @@ -680,19 +692,73 @@ }; }; +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + wakeup-source; + #clock-cells = <0>; + }; +}; + &mdio0 { - rgmii_phy0: phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC0_OUT>; + assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>; + assigned-clock-rates = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_phy0_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; }; }; &mdio1 { - rgmii_phy1: phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC1_OUT>; + assigned-clocks = <&cru REFCLKO25M_GMAC1_OUT>; + assigned-clock-rates = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_phy1_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_rst>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; + + pcie@0,0 { + reg = <0x0 0 0 0 0>; + bus-range = <0x0 0xf>; + device_type = "pci"; + ranges; + #address-cells = <3>; + #size-cells = <2>; + + wifi: wifi@0,0 { + compatible = "pci14e4,449d"; + reg = <0x10000 0 0 0 0>; + clocks = <&hym8563>; + clock-names = "lpo"; + }; }; }; @@ -708,6 +774,28 @@ }; &pinctrl { + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + network { + rgmii_phy0_rst: rgmii-phy0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + rgmii_phy1_rst: rgmii-phy1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie0 { + pcie0_rst: pcie0-rst { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { usb_host_pwren: usb-host-pwren { rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; @@ -721,6 +809,16 @@ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + wifi { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_wake_host: wifi-wake-host { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; }; &sdmmc { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -269,12 +269,6 @@ opp-microvolt = <900000 900000 950000>; clock-latency-ns = <40000>; }; - - opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-microvolt = <950000 950000 950000>; - clock-latency-ns = <40000>; - }; }; cluster1_opp_table: opp-table-cluster1 { @@ -341,12 +335,6 @@ opp-microvolt = <925000 925000 950000>; clock-latency-ns = <40000>; }; - - opp-2304000000 { - opp-hz = /bits/ 64 <2304000000>; - opp-microvolt = <950000 950000 950000>; - clock-latency-ns = <40000>; - }; }; gpu_opp_table: opp-table-gpu { @@ -2311,8 +2299,6 @@ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&i2c9m0_xfer>; - resets = <&cru SRST_I2C9>, <&cru SRST_P_I2C9>; - reset-names = "i2c", "apb"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi @@ -115,7 +115,7 @@ }; }; - gpu_opp_table: opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-300000000 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -382,14 +382,12 @@ cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; mmc-pwrseq = <&emmc_pwrseq>; no-sdio; no-sd; non-removable; pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vcc_1v8_s3>; status = "okay"; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3588j.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3588j.dtsi @@ -66,7 +66,7 @@ }; }; - gpu_opp_table: opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-300000000 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts @@ -14,8 +14,8 @@ gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; regulator-name = "vcc3v3_pcie20"; regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; vin-supply = <&vcc5v0_sys>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -221,6 +221,13 @@ regulator-off-in-suspend; }; }; + + eeprom: eeprom@50 { + compatible = "belling,bl24c16a", "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + vcc-supply = <&vcc_3v3_pmu>; + }; }; &i2c2 { @@ -242,12 +249,6 @@ regulator-off-in-suspend; }; }; - - eeprom: eeprom@50 { - compatible = "belling,bl24c16a", "atmel,24c16"; - reg = <0x50>; - pagesize = <16>; - }; }; &i2c3 { @@ -593,7 +594,7 @@ }; }; - vcc_3v3_s3: dcdc-reg8 { + vcc_3v3_pmu: vcc_3v3_s3: dcdc-reg8 { regulator-name = "vcc_3v3_s3"; regulator-always-on; regulator-boot-on; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi @@ -46,31 +46,31 @@ pmsg-size = <0x8000>; }; - rtos_ipc_memory_region: ipc-memories@9c800000 { + rtos_ipc_memory_region: memory@9c800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c800000 0x00 0x00300000>; no-map; }; - mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 { + mcu_m4fss_dma_memory_region: memory@9cb00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9cb00000 0x00 0x100000>; no-map; }; - mcu_m4fss_memory_region: m4f-memory@9cc00000 { + mcu_m4fss_memory_region: memory@9cc00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9cc00000 0x00 0xe00000>; no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 { + wkup_r5fss0_core0_dma_memory_region: memory@9da00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9da00000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 { + wkup_r5fss0_core0_memory_region: memory@9db00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9db00000 0x00 0xc00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts @@ -54,13 +54,13 @@ linux,cma-default; }; - mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 { + mcu_m4fss_dma_memory_region: memory@9cb00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9cb00000 0x00 0x100000>; no-map; }; - mcu_m4fss_memory_region: m4f-memory@9cc00000 { + mcu_m4fss_memory_region: memory@9cc00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9cc00000 0x00 0xe00000>; no-map; @@ -78,7 +78,7 @@ no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + wkup_r5fss0_core0_dma_memory_region: memory@9db00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9db00000 0x00 0xc00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -206,7 +206,7 @@ no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + wkup_r5fss0_core0_dma_memory_region: memory@9db00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9db00000 0x00 0xc00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -83,7 +83,7 @@ no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + wkup_r5fss0_core0_dma_memory_region: memory@9db00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9db00000 0x00 0xc00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -267,7 +267,7 @@ main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; - reg = <0x00 0xf4000 0x00 0x2ac>; + reg = <0x00 0xf4000 0x00 0x25c>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -59,37 +59,37 @@ linux,cma-default; }; - c7x_0_dma_memory_region: c7x-dma-memory@99800000 { + c7x_0_dma_memory_region: memory@99800000 { compatible = "shared-dma-pool"; reg = <0x00 0x99800000 0x00 0x100000>; no-map; }; - c7x_0_memory_region: c7x-memory@99900000 { + c7x_0_memory_region: memory@99900000 { compatible = "shared-dma-pool"; reg = <0x00 0x99900000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 { + mcu_r5fss0_core0_dma_memory_region: memory@9b800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b800000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 { + mcu_r5fss0_core0_memory_region: memory@9b900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b900000 0x00 0xf00000>; no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c800000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + wkup_r5fss0_core0_memory_region: memory@9c900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c900000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -53,37 +53,37 @@ linux,cma-default; }; - c7x_0_dma_memory_region: c7x-dma-memory@99800000 { + c7x_0_dma_memory_region: memory@99800000 { compatible = "shared-dma-pool"; reg = <0x00 0x99800000 0x00 0x100000>; no-map; }; - c7x_0_memory_region: c7x-memory@99900000 { + c7x_0_memory_region: memory@99900000 { compatible = "shared-dma-pool"; reg = <0x00 0x99900000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 { + mcu_r5fss0_core0_dma_memory_region: memory@9b800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b800000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 { + mcu_r5fss0_core0_memory_region: memory@9b900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b900000 0x00 0xf00000>; no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c800000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + wkup_r5fss0_core0_memory_region: memory@9c900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c900000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts @@ -58,37 +58,37 @@ no-map; }; - c7x_0_dma_memory_region: c7x-dma-memory@99800000 { + c7x_0_dma_memory_region: memory@99800000 { compatible = "shared-dma-pool"; reg = <0x00 0x99800000 0x00 0x100000>; no-map; }; - c7x_0_memory_region: c7x-memory@99900000 { + c7x_0_memory_region: memory@99900000 { compatible = "shared-dma-pool"; reg = <0x00 0x99900000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 { + mcu_r5fss0_core0_dma_memory_region: memory@9b800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b800000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 { + mcu_r5fss0_core0_memory_region: memory@9b900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b900000 0x00 0xf00000>; no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c800000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + wkup_r5fss0_core0_memory_region: memory@9c900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c900000 0x00 0xf00000>; no-map; @@ -100,7 +100,7 @@ no-map; }; - rtos_ipc_memory_region: ipc-memories@a0000000 { + rtos_ipc_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x01000000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi @@ -162,7 +162,7 @@ no-map; }; - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + wkup_r5fss0_core0_memory_region: memory@9c900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c900000 0x00 0x01e00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62p.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62p.dtsi @@ -59,7 +59,7 @@ <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ - <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x0fd80000 0x00 0x0fd80000 0x00 0x00080000>, /* GPU */ <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -49,25 +49,25 @@ #size-cells = <2>; ranges; - mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 { + mcu_r5fss0_core0_dma_memory_region: memory@9b800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b800000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 { + mcu_r5fss0_core0_memory_region: memory@9b900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9b900000 0x00 0xf00000>; no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c800000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 { + wkup_r5fss0_core0_memory_region: memory@9c900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c900000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62p5.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62p5.dtsi @@ -135,7 +135,7 @@ opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-supported-hw = <0x01 0x0006>; + opp-supported-hw = <0x01 0x0007>; clock-latency-ns = <6000000>; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -58,25 +58,25 @@ linux,cma-default; }; - mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 { + mcu_m4fss_dma_memory_region: memory@9cb00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9cb00000 0x00 0x100000>; no-map; }; - mcu_m4fss_memory_region: m4f-memory@9cc00000 { + mcu_m4fss_memory_region: memory@9cc00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9cc00000 0x00 0xe00000>; no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 { + wkup_r5fss0_core0_dma_memory_region: memory@9da00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9da00000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 { + wkup_r5fss0_core0_memory_region: memory@9db00000 { compatible = "shared-dma-pool"; reg = <0x00 0x9db00000 0x00 0xc00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -41,67 +41,67 @@ no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + main_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + main_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + main_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + main_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss1_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + main_r5fss1_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss1_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + main_r5fss1_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 { + mcu_m4fss_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - mcu_m4fss_memory_region: m4f-memory@a4100000 { + mcu_m4fss_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a5000000 { + rtos_ipc_memory_region: memory@a5000000 { reg = <0x00 0xa5000000 0x00 0x00800000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -53,67 +53,67 @@ no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + main_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + main_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + main_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + main_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss1_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + main_r5fss1_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss1_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + main_r5fss1_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 { + mcu_m4fss_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - mcu_m4fss_memory_region: m4f-memory@a4100000 { + mcu_m4fss_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a5000000 { + rtos_ipc_memory_region: memory@a5000000 { reg = <0x00 0xa5000000 0x00 0x00800000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -51,67 +51,67 @@ no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + main_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + main_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + main_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + main_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss1_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + main_r5fss1_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss1_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + main_r5fss1_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 { + mcu_m4fss_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - mcu_m4fss_memory_region: m4f-memory@a4100000 { + mcu_m4fss_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a5000000 { + rtos_ipc_memory_region: memory@a5000000 { reg = <0x00 0xa5000000 0x00 0x00800000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi @@ -115,49 +115,49 @@ no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + main_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + main_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + main_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + main_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss1_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + main_r5fss1_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss1_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + main_r5fss1_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi @@ -31,55 +31,55 @@ no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + main_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + main_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + main_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + main_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss1_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + main_r5fss1_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss1_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + main_r5fss1_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a5000000 { + rtos_ipc_memory_region: memory@a5000000 { reg = <0x00 0xa5000000 0x00 0x00800000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -47,31 +47,31 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0 0xa0000000 0 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0 0xa0100000 0 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0 0xa1000000 0 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0 0xa1100000 0 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a2000000 { + rtos_ipc_memory_region: memory@a2000000 { reg = <0x00 0xa2000000 0x00 0x00200000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -50,31 +50,31 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0 0xa0000000 0 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0 0xa0100000 0 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0 0xa1000000 0 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0 0xa1100000 0 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a2000000 { + rtos_ipc_memory_region: memory@a2000000 { reg = <0x00 0xa2000000 0x00 0x00100000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts @@ -50,67 +50,67 @@ no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + wkup_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + wkup_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 { + mcu_r5fss0_core0_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - c7x_0_dma_memory_region: c7x-dma-memory@a3000000 { + c7x_0_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - c7x_0_memory_region: c7x-memory@a3100000 { + c7x_0_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - c7x_1_dma_memory_region: c7x-dma-memory@a4000000 { + c7x_1_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - c7x_1_memory_region: c7x-memory@a4100000 { + c7x_1_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a5000000 { + rtos_ipc_memory_region: memory@a5000000 { reg = <0x00 0xa5000000 0x00 0x1c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi @@ -49,103 +49,103 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a6000000 { + c71_0_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a6100000 { + c71_0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - c71_1_dma_memory_region: c71-dma-memory@a7000000 { + c71_1_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - c71_1_memory_region: c71-memory@a7100000 { + c71_1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a8000000 { + rtos_ipc_memory_region: memory@a8000000 { reg = <0x00 0xa8000000 0x00 0x01c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -27,103 +27,103 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a6000000 { + c71_0_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a6100000 { + c71_0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - c71_1_dma_memory_region: c71-dma-memory@a7000000 { + c71_1_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - c71_1_memory_region: c71-memory@a7100000 { + c71_1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a8000000 { + rtos_ipc_memory_region: memory@a8000000 { reg = <0x00 0xa8000000 0x00 0x01c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -49,145 +49,145 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { + main_r5fss2_core0_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - main_r5fss2_core0_memory_region: r5f-memory@a6100000 { + main_r5fss2_core0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { + main_r5fss2_core1_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - main_r5fss2_core1_memory_region: r5f-memory@a7100000 { + main_r5fss2_core1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a8000000 { + c71_0_dma_memory_region: memory@a8000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a8100000 { + c71_0_memory_region: memory@a8100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8100000 0x00 0xf00000>; no-map; }; - c71_1_dma_memory_region: c71-dma-memory@a9000000 { + c71_1_dma_memory_region: memory@a9000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa9000000 0x00 0x100000>; no-map; }; - c71_1_memory_region: c71-memory@a9100000 { + c71_1_memory_region: memory@a9100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa9100000 0x00 0xf00000>; no-map; }; - c71_2_dma_memory_region: c71-dma-memory@aa000000 { + c71_2_dma_memory_region: memory@aa000000 { compatible = "shared-dma-pool"; reg = <0x00 0xaa000000 0x00 0x100000>; no-map; }; - c71_2_memory_region: c71-memory@aa100000 { + c71_2_memory_region: memory@aa100000 { compatible = "shared-dma-pool"; reg = <0x00 0xaa100000 0x00 0xf00000>; no-map; }; - c71_3_dma_memory_region: c71-dma-memory@ab000000 { + c71_3_dma_memory_region: memory@ab000000 { compatible = "shared-dma-pool"; reg = <0x00 0xab000000 0x00 0x100000>; no-map; }; - c71_3_memory_region: c71-memory@ab100000 { + c71_3_memory_region: memory@ab100000 { compatible = "shared-dma-pool"; reg = <0x00 0xab100000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -29,55 +29,55 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a4000000 { + rtos_ipc_memory_region: memory@a4000000 { reg = <0x00 0xa4000000 0x00 0x00800000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -51,115 +51,117 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - c66_0_dma_memory_region: c66-dma-memory@a6000000 { + /* Carveout locations are flipped due to caching */ + c66_1_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - c66_0_memory_region: c66-memory@a6100000 { + c66_0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - c66_1_dma_memory_region: c66-dma-memory@a7000000 { + /* Carveout locations are flipped due to caching */ + c66_0_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - c66_1_memory_region: c66-memory@a7100000 { + c66_1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a8000000 { + c71_0_dma_memory_region: memory@a8000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a8100000 { + c71_0_memory_region: memory@a8100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@aa000000 { + rtos_ipc_memory_region: memory@aa000000 { reg = <0x00 0xaa000000 0x00 0x01c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -48,115 +48,117 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - c66_0_dma_memory_region: c66-dma-memory@a6000000 { + /* Carveout locations are flipped due to caching */ + c66_1_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - c66_0_memory_region: c66-memory@a6100000 { + c66_0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - c66_1_dma_memory_region: c66-dma-memory@a7000000 { + /* Carveout locations are flipped due to caching */ + c66_0_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - c66_1_memory_region: c66-memory@a7100000 { + c66_1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a8000000 { + c71_0_dma_memory_region: memory@a8000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a8100000 { + c71_0_memory_region: memory@a8100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@aa000000 { + rtos_ipc_memory_region: memory@aa000000 { reg = <0x00 0xaa000000 0x00 0x01c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -29,115 +29,115 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - c66_1_dma_memory_region: c66-dma-memory@a6000000 { + c66_1_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - c66_0_memory_region: c66-memory@a6100000 { + c66_0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - c66_0_dma_memory_region: c66-dma-memory@a7000000 { + c66_0_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - c66_1_memory_region: c66-memory@a7100000 { + c66_1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a8000000 { + c71_0_dma_memory_region: memory@a8000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a8100000 { + c71_0_memory_region: memory@a8100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@aa000000 { + rtos_ipc_memory_region: memory@aa000000 { reg = <0x00 0xaa000000 0x00 0x01c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -31,103 +31,103 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a6000000 { + c71_0_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a6100000 { + c71_0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - c71_1_dma_memory_region: c71-dma-memory@a7000000 { + c71_1_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - c71_1_memory_region: c71-memory@a7100000 { + c71_1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a8000000 { + rtos_ipc_memory_region: memory@a8000000 { reg = <0x00 0xa8000000 0x00 0x01c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -52,67 +52,67 @@ no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + wkup_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + wkup_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 { + mcu_r5fss0_core0_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - c7x_0_dma_memory_region: c7x-dma-memory@a3000000 { + c7x_0_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - c7x_0_memory_region: c7x-memory@a3100000 { + c7x_0_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - c7x_1_dma_memory_region: c7x-dma-memory@a4000000 { + c7x_1_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - c7x_1_memory_region: c7x-memory@a4100000 { + c7x_1_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - rtos_ipc_memory_region: ipc-memories@a5000000 { + rtos_ipc_memory_region: memory@a5000000 { reg = <0x00 0xa5000000 0x00 0x1c00000>; alignment = <0x1000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for J742S2 SoC Family + * + * TRM: https://www.ti.com/lit/pdf/spruje3 + * + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + * + */ + +&mcu_r5fss0_core0 { + firmware-name = "j742s2-mcu-r5f0_0-fw"; +}; + +&mcu_r5fss0_core1 { + firmware-name = "j742s2-mcu-r5f0_1-fw"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j742s2.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j742s2.dtsi @@ -96,3 +96,4 @@ }; #include "k3-j742s2-main.dtsi" +#include "k3-j742s2-mcu-wakeup.dtsi" --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -28,13 +28,13 @@ #address-cells = <2>; #size-cells = <2>; - c71_3_dma_memory_region: c71-dma-memory@ab000000 { + c71_3_dma_memory_region: memory@ab000000 { compatible = "shared-dma-pool"; reg = <0x00 0xab000000 0x00 0x100000>; no-map; }; - c71_3_memory_region: c71-memory@ab100000 { + c71_3_memory_region: memory@ab100000 { compatible = "shared-dma-pool"; reg = <0x00 0xab100000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi @@ -35,133 +35,133 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + mcu_r5fss0_core0_memory_region: memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + mcu_r5fss0_core1_dma_memory_region: memory@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + mcu_r5fss0_core1_memory_region: memory@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + main_r5fss0_core0_dma_memory_region: memory@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + main_r5fss0_core0_memory_region: memory@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + main_r5fss0_core1_dma_memory_region: memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + main_r5fss0_core1_memory_region: memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + main_r5fss1_core0_dma_memory_region: memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + main_r5fss1_core0_memory_region: memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + main_r5fss1_core1_dma_memory_region: memory@a5000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5000000 0x00 0x100000>; no-map; }; - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + main_r5fss1_core1_memory_region: memory@a5100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa5100000 0x00 0xf00000>; no-map; }; - main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { + main_r5fss2_core0_dma_memory_region: memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; }; - main_r5fss2_core0_memory_region: r5f-memory@a6100000 { + main_r5fss2_core0_memory_region: memory@a6100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6100000 0x00 0xf00000>; no-map; }; - main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { + main_r5fss2_core1_dma_memory_region: memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; }; - main_r5fss2_core1_memory_region: r5f-memory@a7100000 { + main_r5fss2_core1_memory_region: memory@a7100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; - c71_0_dma_memory_region: c71-dma-memory@a8000000 { + c71_0_dma_memory_region: memory@a8000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8000000 0x00 0x100000>; no-map; }; - c71_0_memory_region: c71-memory@a8100000 { + c71_0_memory_region: memory@a8100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa8100000 0x00 0xf00000>; no-map; }; - c71_1_dma_memory_region: c71-dma-memory@a9000000 { + c71_1_dma_memory_region: memory@a9000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa9000000 0x00 0x100000>; no-map; }; - c71_1_memory_region: c71-memory@a9100000 { + c71_1_memory_region: memory@a9100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa9100000 0x00 0xf00000>; no-map; }; - c71_2_dma_memory_region: c71-dma-memory@aa000000 { + c71_2_dma_memory_region: memory@aa000000 { compatible = "shared-dma-pool"; reg = <0x00 0xaa000000 0x00 0x100000>; no-map; }; - c71_2_memory_region: c71-memory@aa100000 { + c71_2_memory_region: memory@aa100000 { compatible = "shared-dma-pool"; reg = <0x00 0xaa100000 0x00 0xf00000>; no-map; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -55,8 +55,8 @@ #define PIN_DS_FORCE_DISABLE (0 << FORCE_DS_EN_SHIFT) #define PIN_DS_FORCE_ENABLE (1 << FORCE_DS_EN_SHIFT) -#define PIN_DS_IO_OVERRIDE_DISABLE (0 << DS_IO_OVERRIDE_EN_SHIFT) -#define PIN_DS_IO_OVERRIDE_ENABLE (1 << DS_IO_OVERRIDE_EN_SHIFT) +#define PIN_DS_ISO_OVERRIDE_DISABLE (0 << ISO_OVERRIDE_EN_SHIFT) +#define PIN_DS_ISO_OVERRIDE_ENABLE (1 << ISO_OVERRIDE_EN_SHIFT) #define PIN_DS_OUT_ENABLE (0 << DS_OUT_DIS_SHIFT) #define PIN_DS_OUT_DISABLE (1 << DS_OUT_DIS_SHIFT) #define PIN_DS_OUT_VALUE_ZERO (0 << DS_OUT_VAL_SHIFT) --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/xilinx/versal-net.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/xilinx/versal-net.dtsi @@ -556,7 +556,7 @@ reg = <0 0xf12a0000 0 0x100>; interrupts = <0 200 4>, <0 201 4>; interrupt-names = "alarm", "sec"; - calibration = <0x8000>; + calibration = <0x7FFF>; }; sdhci0: mmc@f1040000 { --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -808,8 +808,8 @@ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; - drive-strength = <4>; - slew-rate = ; + drive-strength = <12>; + slew-rate = ; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ linux-riscv-6.17-6.17.0/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -550,6 +550,7 @@ reg = <0x0 0xfec10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu0>; + status = "disabled"; }; cpu1_debug: debug@fed10000 { @@ -557,6 +558,7 @@ reg = <0x0 0xfed10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu1>; + status = "disabled"; }; cpu2_debug: debug@fee10000 { @@ -564,6 +566,7 @@ reg = <0x0 0xfee10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu2>; + status = "disabled"; }; cpu3_debug: debug@fef10000 { @@ -571,6 +574,7 @@ reg = <0x0 0xfef10000 0x0 0x1000>; clock-names = "apb_pclk"; cpu = <&cpu3>; + status = "disabled"; }; /* GDMA */ --- linux-riscv-6.17-6.17.0.orig/arch/arm64/include/asm/alternative.h +++ linux-riscv-6.17-6.17.0/arch/arm64/include/asm/alternative.h @@ -26,9 +26,12 @@ bool alternative_is_applied(u16 cpucap); #ifdef CONFIG_MODULES -void apply_alternatives_module(void *start, size_t length); +int apply_alternatives_module(void *start, size_t length); #else -static inline void apply_alternatives_module(void *start, size_t length) { } +static inline int apply_alternatives_module(void *start, size_t length) +{ + return 0; +} #endif void alt_cb_patch_nops(struct alt_instr *alt, __le32 *origptr, --- linux-riscv-6.17-6.17.0.orig/arch/arm64/include/asm/cputype.h +++ linux-riscv-6.17-6.17.0/arch/arm64/include/asm/cputype.h @@ -93,6 +93,7 @@ #define ARM_CPU_PART_NEOVERSE_V2 0xD4F #define ARM_CPU_PART_CORTEX_A720 0xD81 #define ARM_CPU_PART_CORTEX_X4 0xD82 +#define ARM_CPU_PART_NEOVERSE_V3AE 0xD83 #define ARM_CPU_PART_NEOVERSE_V3 0xD84 #define ARM_CPU_PART_CORTEX_X925 0xD85 #define ARM_CPU_PART_CORTEX_A725 0xD87 @@ -182,6 +183,7 @@ #define MIDR_NEOVERSE_V2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V2) #define MIDR_CORTEX_A720 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720) #define MIDR_CORTEX_X4 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X4) +#define MIDR_NEOVERSE_V3AE MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3AE) #define MIDR_NEOVERSE_V3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3) #define MIDR_CORTEX_X925 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X925) #define MIDR_CORTEX_A725 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A725) --- linux-riscv-6.17-6.17.0.orig/arch/arm64/include/asm/ftrace.h +++ linux-riscv-6.17-6.17.0/arch/arm64/include/asm/ftrace.h @@ -153,6 +153,7 @@ regs->pc = afregs->pc; regs->regs[29] = afregs->fp; regs->regs[30] = afregs->lr; + regs->pstate = PSR_MODE_EL1h; return regs; } --- linux-riscv-6.17-6.17.0.orig/arch/arm64/include/asm/pgtable.h +++ linux-riscv-6.17-6.17.0/arch/arm64/include/asm/pgtable.h @@ -293,7 +293,8 @@ static inline pte_t pte_mkwrite_novma(pte_t pte) { pte = set_pte_bit(pte, __pgprot(PTE_WRITE)); - pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY)); + if (pte_sw_dirty(pte)) + pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY)); return pte; } --- linux-riscv-6.17-6.17.0.orig/arch/arm64/include/asm/sysreg.h +++ linux-riscv-6.17-6.17.0/arch/arm64/include/asm/sysreg.h @@ -1231,10 +1231,19 @@ __val; \ }) +/* + * The "Z" constraint combined with the "%x0" template should be enough + * to force XZR generation if (v) is a constant 0 value but LLVM does not + * yet understand that modifier/constraint combo so a conditional is required + * to nudge the compiler into using XZR as a source for a 0 constant value. + */ #define write_sysreg_s(v, r) do { \ u64 __val = (u64)(v); \ u32 __maybe_unused __check_r = (u32)(r); \ - asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); \ + if (__builtin_constant_p(__val) && __val == 0) \ + asm volatile(__msr_s(r, "xzr")); \ + else \ + asm volatile(__msr_s(r, "%x0") : : "r" (__val)); \ } while (0) /* --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/acpi.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/acpi.c @@ -197,8 +197,6 @@ */ void __init acpi_boot_table_init(void) { - int ret; - /* * Enable ACPI instead of device tree unless * - ACPI has been disabled explicitly (acpi=off), or @@ -252,12 +250,10 @@ * behaviour, use acpi=nospcr to disable console in ACPI SPCR * table as default serial console. */ - ret = acpi_parse_spcr(earlycon_acpi_spcr_enable, + acpi_parse_spcr(earlycon_acpi_spcr_enable, !param_acpi_nospcr); - if (!ret || param_acpi_nospcr || !IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) - pr_info("Use ACPI SPCR as default console: No\n"); - else - pr_info("Use ACPI SPCR as default console: Yes\n"); + pr_info("Use ACPI SPCR as default console: %s\n", + param_acpi_nospcr ? "No" : "Yes"); if (IS_ENABLED(CONFIG_ACPI_BGRT)) acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/alternative.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/alternative.c @@ -139,9 +139,9 @@ } while (cur += d_size, cur < end); } -static void __apply_alternatives(const struct alt_region *region, - bool is_module, - unsigned long *cpucap_mask) +static int __apply_alternatives(const struct alt_region *region, + bool is_module, + unsigned long *cpucap_mask) { struct alt_instr *alt; __le32 *origptr, *updptr; @@ -166,10 +166,13 @@ updptr = is_module ? origptr : lm_alias(origptr); nr_inst = alt->orig_len / AARCH64_INSN_SIZE; - if (ALT_HAS_CB(alt)) + if (ALT_HAS_CB(alt)) { alt_cb = ALT_REPL_PTR(alt); - else + if (is_module && !core_kernel_text((unsigned long)alt_cb)) + return -ENOEXEC; + } else { alt_cb = patch_alternative; + } alt_cb(alt, origptr, updptr, nr_inst); @@ -193,6 +196,8 @@ bitmap_and(applied_alternatives, applied_alternatives, system_cpucaps, ARM64_NCAPS); } + + return 0; } static void __init apply_alternatives_vdso(void) @@ -277,7 +282,7 @@ } #ifdef CONFIG_MODULES -void apply_alternatives_module(void *start, size_t length) +int apply_alternatives_module(void *start, size_t length) { struct alt_region region = { .begin = start, @@ -287,7 +292,7 @@ bitmap_fill(all_capabilities, ARM64_NCAPS); - __apply_alternatives(®ion, true, &all_capabilities[0]); + return __apply_alternatives(®ion, true, &all_capabilities[0]); } #endif --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/asm-offsets.c @@ -6,6 +6,7 @@ * 2001-2002 Keith Owens * Copyright (C) 2012 ARM Ltd. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/cpu_errata.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/cpu_errata.c @@ -545,6 +545,7 @@ MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1), MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2), MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3), + MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3AE), {} }; #endif --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/cpufeature.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/cpufeature.c @@ -2408,17 +2408,21 @@ #ifdef CONFIG_ARM64_MTE static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap) { + static bool cleared_zero_page = false; + sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0); mte_cpu_setup(); /* * Clear the tags in the zero page. This needs to be done via the - * linear map which has the Tagged attribute. + * linear map which has the Tagged attribute. Since this page is + * always mapped as pte_special(), set_pte_at() will not attempt to + * clear the tags or set PG_mte_tagged. */ - if (try_page_mte_tagging(ZERO_PAGE(0))) { + if (!cleared_zero_page) { + cleared_zero_page = true; mte_clear_page_tags(lm_alias(empty_zero_page)); - set_page_mte_tagged(ZERO_PAGE(0)); } kasan_init_hw_tags_cpu(); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/entry-common.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/entry-common.c @@ -832,6 +832,8 @@ static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr) { + bool step_done; + if (!is_ttbr0_addr(regs->pc)) arm64_apply_bp_hardening(); @@ -842,10 +844,10 @@ * If we are stepping a suspended breakpoint there's nothing more to do: * the single-step is complete. */ - if (!try_step_suspended_breakpoints(regs)) { - local_daif_restore(DAIF_PROCCTX); + step_done = try_step_suspended_breakpoints(regs); + local_daif_restore(DAIF_PROCCTX); + if (!step_done) do_el0_softstep(esr, regs); - } exit_to_user_mode(regs); } --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/module.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/module.c @@ -489,8 +489,13 @@ int ret; s = find_section(hdr, sechdrs, ".altinstructions"); - if (s) - apply_alternatives_module((void *)s->sh_addr, s->sh_size); + if (s) { + ret = apply_alternatives_module((void *)s->sh_addr, s->sh_size); + if (ret < 0) { + pr_err("module %s: error occurred when applying alternatives\n", me->name); + return ret; + } + } if (scs_is_dynamic()) { s = find_section(hdr, sechdrs, ".init.eh_frame"); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/mte.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/mte.c @@ -460,7 +460,7 @@ if (folio_test_hugetlb(folio)) WARN_ON_ONCE(!folio_test_hugetlb_mte_tagged(folio)); else - WARN_ON_ONCE(!page_mte_tagged(page)); + WARN_ON_ONCE(!page_mte_tagged(page) && !is_zero_page(page)); /* limit access to the end of the page */ offset = offset_in_page(addr); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/pi/map_kernel.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/pi/map_kernel.c @@ -78,6 +78,12 @@ twopass |= enable_scs; prot = twopass ? data_prot : text_prot; + /* + * [_stext, _text) isn't executed after boot and contains some + * non-executable, unpredictable data, so map it non-executable. + */ + map_segment(init_pg_dir, &pgdp, va_offset, _text, _stext, data_prot, + false, root_level); map_segment(init_pg_dir, &pgdp, va_offset, _stext, _etext, prot, !twopass, root_level); map_segment(init_pg_dir, &pgdp, va_offset, __start_rodata, --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/probes/kprobes.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/probes/kprobes.c @@ -10,6 +10,7 @@ #define pr_fmt(fmt) "kprobes: " fmt +#include #include #include #include @@ -41,6 +42,20 @@ static void __kprobes post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *); +void *alloc_insn_page(void) +{ + void *addr; + + addr = execmem_alloc(EXECMEM_KPROBES, PAGE_SIZE); + if (!addr) + return NULL; + if (set_memory_rox((unsigned long)addr, 1)) { + execmem_free(addr); + return NULL; + } + return addr; +} + static void __kprobes arch_prepare_ss_slot(struct kprobe *p) { kprobe_opcode_t *addr = p->ainsn.xol_insn; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/process.c @@ -409,7 +409,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long stack_start = args->stack; unsigned long tls = args->tls; struct pt_regs *childregs = task_pt_regs(p); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kernel/setup.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kernel/setup.c @@ -214,7 +214,7 @@ unsigned long i = 0; size_t res_size; - kernel_code.start = __pa_symbol(_stext); + kernel_code.start = __pa_symbol(_text); kernel_code.end = __pa_symbol(__init_begin - 1); kernel_data.start = __pa_symbol(_sdata); kernel_data.end = __pa_symbol(_end - 1); @@ -280,7 +280,7 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p) { - setup_initial_init_mm(_stext, _etext, _edata, _end); + setup_initial_init_mm(_text, _etext, _edata, _end); *cmdline_p = boot_command_line; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kvm/arm.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kvm/arm.c @@ -1789,6 +1789,9 @@ case KVM_GET_VCPU_EVENTS: { struct kvm_vcpu_events events; + if (!kvm_vcpu_initialized(vcpu)) + return -ENOEXEC; + if (kvm_arm_vcpu_get_events(vcpu, &events)) return -EINVAL; @@ -1800,6 +1803,9 @@ case KVM_SET_VCPU_EVENTS: { struct kvm_vcpu_events events; + if (!kvm_vcpu_initialized(vcpu)) + return -ENOEXEC; + if (copy_from_user(&events, argp, sizeof(events))) return -EFAULT; --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kvm/debug.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kvm/debug.c @@ -15,6 +15,12 @@ #include #include +static int cpu_has_spe(u64 dfr0) +{ + return cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) && + !(read_sysreg_s(SYS_PMBIDR_EL1) & PMBIDR_EL1_P); +} + /** * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value * @@ -74,13 +80,12 @@ *host_data_ptr(debug_brps) = SYS_FIELD_GET(ID_AA64DFR0_EL1, BRPs, dfr0); *host_data_ptr(debug_wrps) = SYS_FIELD_GET(ID_AA64DFR0_EL1, WRPs, dfr0); + if (cpu_has_spe(dfr0)) + host_data_set_flag(HAS_SPE); + if (has_vhe()) return; - if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) && - !(read_sysreg_s(SYS_PMBIDR_EL1) & PMBIDR_EL1_P)) - host_data_set_flag(HAS_SPE); - /* Check if we have BRBE implemented and available at the host */ if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_BRBE_SHIFT)) host_data_set_flag(HAS_BRBE); @@ -99,7 +104,7 @@ void kvm_debug_init_vhe(void) { /* Clear PMSCR_EL1.E{0,1}SPE which reset to UNKNOWN values. */ - if (SYS_FIELD_GET(ID_AA64DFR0_EL1, PMSVer, read_sysreg(id_aa64dfr0_el1))) + if (host_data_test_flag(HAS_SPE)) write_sysreg_el1(0, SYS_PMSCR); } --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kvm/hyp/nvhe/ffa.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kvm/hyp/nvhe/ffa.c @@ -437,7 +437,7 @@ struct ffa_mem_region_attributes *ep_mem_access; struct ffa_composite_mem_region *reg; struct ffa_mem_region *buf; - u32 offset, nr_ranges; + u32 offset, nr_ranges, checked_offset; int ret = 0; if (addr_mbz || npages_mbz || fraglen > len || @@ -474,7 +474,12 @@ goto out_unlock; } - if (fraglen < offset + sizeof(struct ffa_composite_mem_region)) { + if (check_add_overflow(offset, sizeof(struct ffa_composite_mem_region), &checked_offset)) { + ret = FFA_RET_INVALID_PARAMETERS; + goto out_unlock; + } + + if (fraglen < checked_offset) { ret = FFA_RET_INVALID_PARAMETERS; goto out_unlock; } --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kvm/hyp/nvhe/mem_protect.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kvm/hyp/nvhe/mem_protect.c @@ -1010,9 +1010,12 @@ return ret; if (!kvm_pte_valid(pte)) return -ENOENT; - if (kvm_granule_size(level) != size) + if (size && kvm_granule_size(level) != size) return -E2BIG; + if (!size) + size = kvm_granule_size(level); + state = guest_get_page_state(pte, ipa); if (state != PKVM_PAGE_SHARED_BORROWED) return -EPERM; @@ -1100,7 +1103,7 @@ if (prot & ~KVM_PGTABLE_PROT_RWX) return -EINVAL; - assert_host_shared_guest(vm, ipa, PAGE_SIZE); + assert_host_shared_guest(vm, ipa, 0); guest_lock_component(vm); ret = kvm_pgtable_stage2_relax_perms(&vm->pgt, ipa, prot, 0); guest_unlock_component(vm); @@ -1156,7 +1159,7 @@ if (pkvm_hyp_vm_is_protected(vm)) return -EPERM; - assert_host_shared_guest(vm, ipa, PAGE_SIZE); + assert_host_shared_guest(vm, ipa, 0); guest_lock_component(vm); kvm_pgtable_stage2_mkyoung(&vm->pgt, ipa, 0); guest_unlock_component(vm); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kvm/mmu.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kvm/mmu.c @@ -1673,7 +1673,7 @@ * cache maintenance. */ if (!kvm_supports_cacheable_pfnmap()) - return -EFAULT; + ret = -EFAULT; } else { /* * If the page was identified as device early by looking at @@ -1696,7 +1696,12 @@ } if (exec_fault && s2_force_noncacheable) - return -ENOEXEC; + ret = -ENOEXEC; + + if (ret) { + kvm_release_page_unused(page); + return ret; + } /* * Potentially reduce shadow S2 permissions to match the guest's own --- linux-riscv-6.17-6.17.0.orig/arch/arm64/kvm/sys_regs.c +++ linux-riscv-6.17-6.17.0/arch/arm64/kvm/sys_regs.c @@ -2515,19 +2515,23 @@ .val = 0, \ } -/* sys_reg_desc initialiser for known cpufeature ID registers */ -#define AA32_ID_SANITISED(name) { \ - ID_DESC(name), \ - .visibility = aa32_id_visibility, \ - .val = 0, \ -} - /* sys_reg_desc initialiser for writable ID registers */ #define ID_WRITABLE(name, mask) { \ ID_DESC(name), \ .val = mask, \ } +/* + * 32bit ID regs are fully writable when the guest is 32bit + * capable. Nothing in the KVM code should rely on 32bit features + * anyway, only 64bit, so let the VMM do its worse. + */ +#define AA32_ID_WRITABLE(name) { \ + ID_DESC(name), \ + .visibility = aa32_id_visibility, \ + .val = GENMASK(31, 0), \ +} + /* sys_reg_desc initialiser for cpufeature ID registers that need filtering */ #define ID_FILTERED(sysreg, name, mask) { \ ID_DESC(sysreg), \ @@ -3039,40 +3043,39 @@ /* AArch64 mappings of the AArch32 ID registers */ /* CRm=1 */ - AA32_ID_SANITISED(ID_PFR0_EL1), - AA32_ID_SANITISED(ID_PFR1_EL1), + AA32_ID_WRITABLE(ID_PFR0_EL1), + AA32_ID_WRITABLE(ID_PFR1_EL1), { SYS_DESC(SYS_ID_DFR0_EL1), .access = access_id_reg, .get_user = get_id_reg, .set_user = set_id_dfr0_el1, .visibility = aa32_id_visibility, .reset = read_sanitised_id_dfr0_el1, - .val = ID_DFR0_EL1_PerfMon_MASK | - ID_DFR0_EL1_CopDbg_MASK, }, + .val = GENMASK(31, 0) }, ID_HIDDEN(ID_AFR0_EL1), - AA32_ID_SANITISED(ID_MMFR0_EL1), - AA32_ID_SANITISED(ID_MMFR1_EL1), - AA32_ID_SANITISED(ID_MMFR2_EL1), - AA32_ID_SANITISED(ID_MMFR3_EL1), + AA32_ID_WRITABLE(ID_MMFR0_EL1), + AA32_ID_WRITABLE(ID_MMFR1_EL1), + AA32_ID_WRITABLE(ID_MMFR2_EL1), + AA32_ID_WRITABLE(ID_MMFR3_EL1), /* CRm=2 */ - AA32_ID_SANITISED(ID_ISAR0_EL1), - AA32_ID_SANITISED(ID_ISAR1_EL1), - AA32_ID_SANITISED(ID_ISAR2_EL1), - AA32_ID_SANITISED(ID_ISAR3_EL1), - AA32_ID_SANITISED(ID_ISAR4_EL1), - AA32_ID_SANITISED(ID_ISAR5_EL1), - AA32_ID_SANITISED(ID_MMFR4_EL1), - AA32_ID_SANITISED(ID_ISAR6_EL1), + AA32_ID_WRITABLE(ID_ISAR0_EL1), + AA32_ID_WRITABLE(ID_ISAR1_EL1), + AA32_ID_WRITABLE(ID_ISAR2_EL1), + AA32_ID_WRITABLE(ID_ISAR3_EL1), + AA32_ID_WRITABLE(ID_ISAR4_EL1), + AA32_ID_WRITABLE(ID_ISAR5_EL1), + AA32_ID_WRITABLE(ID_MMFR4_EL1), + AA32_ID_WRITABLE(ID_ISAR6_EL1), /* CRm=3 */ - AA32_ID_SANITISED(MVFR0_EL1), - AA32_ID_SANITISED(MVFR1_EL1), - AA32_ID_SANITISED(MVFR2_EL1), + AA32_ID_WRITABLE(MVFR0_EL1), + AA32_ID_WRITABLE(MVFR1_EL1), + AA32_ID_WRITABLE(MVFR2_EL1), ID_UNALLOCATED(3,3), - AA32_ID_SANITISED(ID_PFR2_EL1), + AA32_ID_WRITABLE(ID_PFR2_EL1), ID_HIDDEN(ID_DFR1_EL1), - AA32_ID_SANITISED(ID_MMFR5_EL1), + AA32_ID_WRITABLE(ID_MMFR5_EL1), ID_UNALLOCATED(3,7), /* AArch64 ID registers */ --- linux-riscv-6.17-6.17.0.orig/arch/arm64/mm/copypage.c +++ linux-riscv-6.17-6.17.0/arch/arm64/mm/copypage.c @@ -35,7 +35,7 @@ from != folio_page(src, 0)) return; - WARN_ON_ONCE(!folio_try_hugetlb_mte_tagging(dst)); + folio_try_hugetlb_mte_tagging(dst); /* * Populate tags for all subpages. @@ -51,8 +51,13 @@ } folio_set_hugetlb_mte_tagged(dst); } else if (page_mte_tagged(from)) { - /* It's a new page, shouldn't have been tagged yet */ - WARN_ON_ONCE(!try_page_mte_tagging(to)); + /* + * Most of the time it's a new page that shouldn't have been + * tagged yet. However, folio migration can end up reusing the + * same page without untagging it. Ignore the warning if the + * page is already tagged. + */ + try_page_mte_tagging(to); mte_copy_page_tags(kto, kfrom); set_page_mte_tagged(to); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/mm/init.c +++ linux-riscv-6.17-6.17.0/arch/arm64/mm/init.c @@ -279,7 +279,7 @@ * Register the kernel text, kernel data, initrd, and initial * pagetables with memblock. */ - memblock_reserve(__pa_symbol(_stext), _end - _stext); + memblock_reserve(__pa_symbol(_text), _end - _text); if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) { /* the generic initrd code expects virtual addresses */ initrd_start = __phys_to_virt(phys_initrd_start); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/mm/mmu.c +++ linux-riscv-6.17-6.17.0/arch/arm64/mm/mmu.c @@ -574,8 +574,8 @@ /* * Remove the write permissions from the linear alias of .text/.rodata */ - update_mapping_prot(__pa_symbol(_stext), (unsigned long)lm_alias(_stext), - (unsigned long)__init_begin - (unsigned long)_stext, + update_mapping_prot(__pa_symbol(_text), (unsigned long)lm_alias(_text), + (unsigned long)__init_begin - (unsigned long)_text, PAGE_KERNEL_RO); } @@ -636,7 +636,7 @@ static void __init map_mem(pgd_t *pgdp) { static const u64 direct_map_end = _PAGE_END(VA_BITS_MIN); - phys_addr_t kernel_start = __pa_symbol(_stext); + phys_addr_t kernel_start = __pa_symbol(_text); phys_addr_t kernel_end = __pa_symbol(__init_begin); phys_addr_t start, end; phys_addr_t early_kfence_pool; @@ -683,7 +683,7 @@ } /* - * Map the linear alias of the [_stext, __init_begin) interval + * Map the linear alias of the [_text, __init_begin) interval * as non-executable now, and remove the write permission in * mark_linear_text_alias_ro() below (which will be called after * alternative patching has completed). This makes the contents @@ -710,6 +710,10 @@ WRITE_ONCE(rodata_is_rw, false); update_mapping_prot(__pa_symbol(__start_rodata), (unsigned long)__start_rodata, section_size, PAGE_KERNEL_RO); + /* mark the range between _text and _stext as read only. */ + update_mapping_prot(__pa_symbol(_text), (unsigned long)_text, + (unsigned long)_stext - (unsigned long)_text, + PAGE_KERNEL_RO); } static void __init declare_vma(struct vm_struct *vma, @@ -780,7 +784,7 @@ { static struct vm_struct vmlinux_seg[KERNEL_SEGMENT_COUNT]; - declare_vma(&vmlinux_seg[0], _stext, _etext, VM_NO_GUARD); + declare_vma(&vmlinux_seg[0], _text, _etext, VM_NO_GUARD); declare_vma(&vmlinux_seg[1], __start_rodata, __inittext_begin, VM_NO_GUARD); declare_vma(&vmlinux_seg[2], __inittext_begin, __inittext_end, VM_NO_GUARD); declare_vma(&vmlinux_seg[3], __initdata_begin, __initdata_end, VM_NO_GUARD); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/net/bpf_jit_comp.c +++ linux-riscv-6.17-6.17.0/arch/arm64/net/bpf_jit_comp.c @@ -3064,8 +3064,7 @@ * before freeing it. */ if (jit_data) { - bpf_arch_text_copy(&jit_data->ro_header->size, &jit_data->header->size, - sizeof(jit_data->header->size)); + bpf_jit_binary_pack_finalize(jit_data->ro_header, jit_data->header); kfree(jit_data); } prog->bpf_func -= cfi_get_offset(); --- linux-riscv-6.17-6.17.0.orig/arch/arm64/tools/sysreg +++ linux-riscv-6.17-6.17.0/arch/arm64/tools/sysreg @@ -1693,7 +1693,7 @@ 0b0000 NI 0b0001 IMP EndEnum -UnsignedEnum 39:36 DoubleLock +SignedEnum 39:36 DoubleLock 0b0000 IMP 0b1111 NI EndEnum @@ -2409,7 +2409,7 @@ 0b0000 NI 0b0001 IMP EndEnum -SignedEnum 7:4 EIESB +UnsignedEnum 7:4 EIESB 0b0000 NI 0b0001 ToEL3 0b0010 ToELx --- linux-riscv-6.17-6.17.0.orig/arch/csky/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/csky/kernel/asm-offsets.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/csky/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/csky/kernel/process.c @@ -32,7 +32,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct switch_stack *childstack; --- linux-riscv-6.17-6.17.0.orig/arch/hexagon/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/hexagon/kernel/asm-offsets.c @@ -8,6 +8,7 @@ * * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/hexagon/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/hexagon/kernel/process.c @@ -52,7 +52,7 @@ */ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct thread_info *ti = task_thread_info(p); --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/Makefile +++ linux-riscv-6.17-6.17.0/arch/loongarch/Makefile @@ -115,7 +115,7 @@ # The annotate-tablejump option can not be passed to LLVM backend when LTO is enabled. # Ensure it is aware of linker with LTO, '--loongarch-annotate-tablejump' also needs to # be passed via '-mllvm' to ld.lld. -KBUILD_LDFLAGS += -mllvm --loongarch-annotate-tablejump +KBUILD_LDFLAGS += $(call ld-option,-mllvm --loongarch-annotate-tablejump) endif endif @@ -129,7 +129,7 @@ LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs) endif -cflags-y += $(call cc-option, -mno-check-zero-division) +cflags-y += $(call cc-option, -mno-check-zero-division -fno-isolate-erroneous-paths-dereference) ifndef CONFIG_KASAN cflags-y += -fno-builtin-memcpy -fno-builtin-memmove -fno-builtin-memset --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/include/asm/hw_breakpoint.h +++ linux-riscv-6.17-6.17.0/arch/loongarch/include/asm/hw_breakpoint.h @@ -134,13 +134,13 @@ /* Determine number of BRP registers available. */ static inline int get_num_brps(void) { - return csr_read64(LOONGARCH_CSR_FWPC) & CSR_FWPC_NUM; + return csr_read32(LOONGARCH_CSR_FWPC) & CSR_FWPC_NUM; } /* Determine number of WRP registers available. */ static inline int get_num_wrps(void) { - return csr_read64(LOONGARCH_CSR_MWPC) & CSR_MWPC_NUM; + return csr_read32(LOONGARCH_CSR_MWPC) & CSR_MWPC_NUM; } #endif /* __KERNEL__ */ --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/include/asm/inst.h +++ linux-riscv-6.17-6.17.0/arch/loongarch/include/asm/inst.h @@ -77,6 +77,10 @@ iocsrwrh_op = 0x19205, iocsrwrw_op = 0x19206, iocsrwrd_op = 0x19207, + llacqw_op = 0xe15e0, + screlw_op = 0xe15e1, + llacqd_op = 0xe15e2, + screld_op = 0xe15e3, }; enum reg2i5_op { @@ -189,6 +193,7 @@ fldxd_op = 0x7068, fstxs_op = 0x7070, fstxd_op = 0x7078, + scq_op = 0x70ae, amswapw_op = 0x70c0, amswapd_op = 0x70c1, amaddw_op = 0x70c2, --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/include/asm/io.h +++ linux-riscv-6.17-6.17.0/arch/loongarch/include/asm/io.h @@ -14,7 +14,7 @@ #include #include -extern void __init __iomem *early_ioremap(u64 phys_addr, unsigned long size); +extern void __init __iomem *early_ioremap(phys_addr_t phys_addr, unsigned long size); extern void __init early_iounmap(void __iomem *addr, unsigned long size); #define early_memremap early_ioremap @@ -25,6 +25,9 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, pgprot_t prot) { + if (offset > TO_PHYS_MASK) + return NULL; + switch (pgprot_val(prot) & _CACHE_MASK) { case _CACHE_CC: return (void __iomem *)(unsigned long)(CACHE_BASE + offset); --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/include/asm/pgtable.h +++ linux-riscv-6.17-6.17.0/arch/loongarch/include/asm/pgtable.h @@ -424,6 +424,9 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { + if (pte_val(pte) & _PAGE_DIRTY) + pte_val(pte) |= _PAGE_MODIFIED; + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | (pgprot_val(newprot) & ~_PAGE_CHG_MASK)); } @@ -547,9 +550,11 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) { - pmd_val(pmd) = (pmd_val(pmd) & _HPAGE_CHG_MASK) | - (pgprot_val(newprot) & ~_HPAGE_CHG_MASK); - return pmd; + if (pmd_val(pmd) & _PAGE_DIRTY) + pmd_val(pmd) |= _PAGE_MODIFIED; + + return __pmd((pmd_val(pmd) & _HPAGE_CHG_MASK) | + (pgprot_val(newprot) & ~_HPAGE_CHG_MASK)); } static inline pmd_t pmd_mkinvalid(pmd_t pmd) --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/include/uapi/asm/ptrace.h +++ linux-riscv-6.17-6.17.0/arch/loongarch/include/uapi/asm/ptrace.h @@ -10,10 +10,6 @@ #include -#ifndef __KERNEL__ -#include -#endif - /* * For PTRACE_{POKE,PEEK}USR. 0 - 31 are GPRs, * 32 is syscall's original ARG0, 33 is PC, 34 is BADVADDR. @@ -41,44 +37,44 @@ } __attribute__((aligned(8))); struct user_fp_state { - uint64_t fpr[32]; - uint64_t fcc; - uint32_t fcsr; + __u64 fpr[32]; + __u64 fcc; + __u32 fcsr; }; struct user_lsx_state { /* 32 registers, 128 bits width per register. */ - uint64_t vregs[32*2]; + __u64 vregs[32*2]; }; struct user_lasx_state { /* 32 registers, 256 bits width per register. */ - uint64_t vregs[32*4]; + __u64 vregs[32*4]; }; struct user_lbt_state { - uint64_t scr[4]; - uint32_t eflags; - uint32_t ftop; + __u64 scr[4]; + __u32 eflags; + __u32 ftop; }; struct user_watch_state { - uint64_t dbg_info; + __u64 dbg_info; struct { - uint64_t addr; - uint64_t mask; - uint32_t ctrl; - uint32_t pad; + __u64 addr; + __u64 mask; + __u32 ctrl; + __u32 pad; } dbg_regs[8]; }; struct user_watch_state_v2 { - uint64_t dbg_info; + __u64 dbg_info; struct { - uint64_t addr; - uint64_t mask; - uint32_t ctrl; - uint32_t pad; + __u64 addr; + __u64 mask; + __u32 ctrl; + __u32 pad; } dbg_regs[14]; }; --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/asm-offsets.c @@ -4,6 +4,8 @@ * * Copyright (C) 2020-2022 Loongson Technology Corporation Limited */ +#define COMPILE_OFFSETS + #include #include #include --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/inst.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/inst.c @@ -141,6 +141,9 @@ case amswapw_op ... ammindbdu_op: pr_notice("atomic memory access instructions are not supported\n"); return true; + case scq_op: + pr_notice("sc.q instruction is not supported\n"); + return true; } switch (insn.reg2i14_format.opcode) { @@ -152,6 +155,15 @@ return true; } + switch (insn.reg2_format.opcode) { + case llacqw_op: + case llacqd_op: + case screlw_op: + case screld_op: + pr_notice("llacq and screl instructions are not supported\n"); + return true; + } + switch (insn.reg1i21_format.opcode) { case bceqz_op: pr_notice("bceqz and bcnez instructions are not supported\n"); --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/machine_kexec.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/machine_kexec.c @@ -249,6 +249,7 @@ #ifdef CONFIG_SMP crash_smp_send_stop(); #endif + machine_kexec_mask_interrupts(); cpumask_set_cpu(crashing_cpu, &cpus_in_crash); pr_info("Starting crashdump kernel...\n"); @@ -286,6 +287,7 @@ /* We do not want to be bothered. */ local_irq_disable(); + machine_kexec_mask_interrupts(); pr_notice("EFI boot flag 0x%lx\n", efi_boot); pr_notice("Command line at 0x%lx\n", cmdline_ptr); --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/mem.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/mem.c @@ -13,7 +13,7 @@ void __init memblock_init(void) { u32 mem_type; - u64 mem_start, mem_end, mem_size; + u64 mem_start, mem_size; efi_memory_desc_t *md; /* Parse memory information */ @@ -21,7 +21,6 @@ mem_type = md->type; mem_start = md->phys_addr; mem_size = md->num_pages << EFI_PAGE_SHIFT; - mem_end = mem_start + mem_size; switch (mem_type) { case EFI_LOADER_CODE: @@ -31,8 +30,6 @@ case EFI_PERSISTENT_MEMORY: case EFI_CONVENTIONAL_MEMORY: memblock_add(mem_start, mem_size); - if (max_low_pfn < (mem_end >> PAGE_SHIFT)) - max_low_pfn = mem_end >> PAGE_SHIFT; break; case EFI_PAL_CODE: case EFI_UNUSABLE_MEMORY: @@ -49,6 +46,8 @@ } } + max_pfn = PFN_DOWN(memblock_end_of_DRAM()); + max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn); memblock_set_current_limit(PFN_PHYS(max_low_pfn)); /* Reserve the first 2MB */ --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/numa.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/numa.c @@ -158,35 +158,9 @@ #ifdef CONFIG_ACPI_NUMA -/* - * add_numamem_region - * - * Add a uasable memory region described by BIOS. The - * routine gets each intersection between BIOS's region - * and node's region, and adds them into node's memblock - * pool. - * - */ -static void __init add_numamem_region(u64 start, u64 end, u32 type) -{ - u32 node = pa_to_nid(start); - u64 size = end - start; - static unsigned long num_physpages; - - if (start >= end) { - pr_debug("Invalid region: %016llx-%016llx\n", start, end); - return; - } +static unsigned long num_physpages; - num_physpages += (size >> PAGE_SHIFT); - pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", - node, type, start, size); - pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", - start >> PAGE_SHIFT, end >> PAGE_SHIFT, num_physpages); - memblock_set_node(start, size, &memblock.memory, node); -} - -static void __init init_node_memblock(void) +static void __init info_node_memblock(void) { u32 mem_type; u64 mem_end, mem_start, mem_size; @@ -206,12 +180,20 @@ case EFI_BOOT_SERVICES_DATA: case EFI_PERSISTENT_MEMORY: case EFI_CONVENTIONAL_MEMORY: - add_numamem_region(mem_start, mem_end, mem_type); + num_physpages += (mem_size >> PAGE_SHIFT); + pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", + (u32)pa_to_nid(mem_start), mem_type, mem_start, mem_size); + pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", + mem_start >> PAGE_SHIFT, mem_end >> PAGE_SHIFT, num_physpages); break; case EFI_PAL_CODE: case EFI_UNUSABLE_MEMORY: case EFI_ACPI_RECLAIM_MEMORY: - add_numamem_region(mem_start, mem_end, mem_type); + num_physpages += (mem_size >> PAGE_SHIFT); + pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", + (u32)pa_to_nid(mem_start), mem_type, mem_start, mem_size); + pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", + mem_start >> PAGE_SHIFT, mem_end >> PAGE_SHIFT, num_physpages); fallthrough; case EFI_RESERVED_TYPE: case EFI_RUNTIME_SERVICES_CODE: @@ -249,22 +231,16 @@ for (i = 0; i < NR_CPUS; i++) set_cpuid_to_node(i, NUMA_NO_NODE); - numa_reset_distance(); - nodes_clear(numa_nodes_parsed); - nodes_clear(node_possible_map); - nodes_clear(node_online_map); - WARN_ON(memblock_clear_hotplug(0, PHYS_ADDR_MAX)); - /* Parse SRAT and SLIT if provided by firmware. */ - ret = acpi_disabled ? fake_numa_init() : acpi_numa_init(); + if (!acpi_disabled) + ret = numa_memblks_init(acpi_numa_init, false); + else + ret = numa_memblks_init(fake_numa_init, false); + if (ret < 0) return ret; - node_possible_map = numa_nodes_parsed; - if (WARN_ON(nodes_empty(node_possible_map))) - return -EINVAL; - - init_node_memblock(); + info_node_memblock(); if (!memblock_validate_numa_coverage(SZ_1M)) return -EINVAL; @@ -272,7 +248,8 @@ node_mem_init(node); node_set_online(node); } - max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); + max_pfn = PFN_DOWN(memblock_end_of_DRAM()); + max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn); setup_nr_node_ids(); loongson_sysconf.nr_nodes = nr_node_ids; @@ -283,26 +260,6 @@ #endif -void __init paging_init(void) -{ - unsigned int node; - unsigned long zones_size[MAX_NR_ZONES] = {0, }; - - for_each_online_node(node) { - unsigned long start_pfn, end_pfn; - - get_pfn_range_for_nid(node, &start_pfn, &end_pfn); - - if (end_pfn > max_low_pfn) - max_low_pfn = end_pfn; - } -#ifdef CONFIG_ZONE_DMA32 - zones_size[ZONE_DMA32] = MAX_DMA32_PFN; -#endif - zones_size[ZONE_NORMAL] = max_low_pfn; - free_area_init(zones_size); -} - int pcibus_to_node(struct pci_bus *bus) { return dev_to_node(&bus->dev); --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/process.c @@ -167,7 +167,7 @@ unsigned long childksp; unsigned long tls = args->tls; unsigned long usp = args->stack; - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; struct pt_regs *childregs, *regs = current_pt_regs(); childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE; --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/relocate.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/relocate.c @@ -166,6 +166,10 @@ return true; #endif + str = strstr(boot_command_line, "kexec_file"); + if (str == boot_command_line || (str > boot_command_line && *(str - 1) == ' ')) + return true; + return false; } --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/setup.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/setup.c @@ -294,8 +294,6 @@ early_init_dt_scan(fdt_pointer, __pa(fdt_pointer)); early_init_fdt_reserve_self(); - - max_low_pfn = PFN_PHYS(memblock_end_of_DRAM()); #endif } @@ -355,6 +353,7 @@ #ifdef CONFIG_ACPI acpi_table_upgrade(); + acpi_gbl_use_global_lock = false; acpi_gbl_use_default_register_widths = false; acpi_boot_table_init(); #endif @@ -389,7 +388,8 @@ static void __init arch_mem_init(char **cmdline_p) { /* Recalculate max_low_pfn for "mem=xxx" */ - max_pfn = max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); + max_pfn = PFN_DOWN(memblock_end_of_DRAM()); + max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn); if (usermem) pr_info("User-defined physical RAM map overwrite\n"); --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kernel/traps.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kernel/traps.c @@ -1131,8 +1131,8 @@ tlbrentry = (unsigned long)exception_handlers + 80*VECSIZE; csr_write64(eentry, LOONGARCH_CSR_EENTRY); - csr_write64(eentry, LOONGARCH_CSR_MERRENTRY); - csr_write64(tlbrentry, LOONGARCH_CSR_TLBRENTRY); + csr_write64(__pa(eentry), LOONGARCH_CSR_MERRENTRY); + csr_write64(__pa(tlbrentry), LOONGARCH_CSR_TLBRENTRY); } void per_cpu_trap_init(int cpu) --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kvm/intc/eiointc.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kvm/intc/eiointc.c @@ -439,7 +439,7 @@ spin_lock_irqsave(&s->lock, flags); switch (type) { case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_NUM_CPU: - if (val >= EIOINTC_ROUTE_MAX_VCPUS) + if (val > EIOINTC_ROUTE_MAX_VCPUS) ret = -EINVAL; else s->num_cpu = val; --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kvm/timer.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kvm/timer.c @@ -4,6 +4,7 @@ */ #include +#include #include #include @@ -95,6 +96,7 @@ * and set CSR TVAL with -1 */ write_gcsr_timertick(0); + __delay(2); /* Wait cycles until timer interrupt injected */ /* * Writing CSR_TINTCLR_TI to LOONGARCH_CSR_TINTCLR will clear --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/kvm/vcpu.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/kvm/vcpu.c @@ -133,6 +133,9 @@ * Clear KVM_LARCH_PMU if the guest is not using PMU CSRs when * exiting the guest, so that the next time trap into the guest. * We don't need to deal with PMU CSRs contexts. + * + * Otherwise set the request bit KVM_REQ_PMU to restore guest PMU + * before entering guest VM */ val = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL0); val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL1); @@ -140,6 +143,8 @@ val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL3); if (!(val & KVM_PMU_EVENT_ENABLED)) vcpu->arch.aux_inuse &= ~KVM_LARCH_PMU; + else + kvm_make_request(KVM_REQ_PMU, vcpu); kvm_restore_host_pmu(vcpu); } --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/mm/init.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/mm/init.c @@ -60,7 +60,6 @@ return memblock_is_memory(addr) && !memblock_is_reserved(addr); } -#ifndef CONFIG_NUMA void __init paging_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; @@ -72,7 +71,6 @@ free_area_init(max_zone_pfns); } -#endif /* !CONFIG_NUMA */ void __ref free_initmem(void) { --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/mm/ioremap.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/mm/ioremap.c @@ -6,7 +6,7 @@ #include #include -void __init __iomem *early_ioremap(u64 phys_addr, unsigned long size) +void __init __iomem *early_ioremap(phys_addr_t phys_addr, unsigned long size) { return ((void __iomem *)TO_CACHE(phys_addr)); } --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/net/bpf_jit.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/net/bpf_jit.c @@ -1294,8 +1294,10 @@ u32 old_insns[LOONGARCH_LONG_JUMP_NINSNS] = {[0 ... 4] = INSN_NOP}; u32 new_insns[LOONGARCH_LONG_JUMP_NINSNS] = {[0 ... 4] = INSN_NOP}; - if (!is_kernel_text((unsigned long)ip) && - !is_bpf_text_address((unsigned long)ip)) + /* Only poking bpf text is supported. Since kernel function entry + * is set up by ftrace, we rely on ftrace to poke kernel functions. + */ + if (!is_bpf_text_address((unsigned long)ip)) return -ENOTSUPP; ret = emit_jump_or_nops(old_addr, ip, old_insns, is_call); @@ -1448,12 +1450,43 @@ bpf_prog_pack_free(image, size); } +/* + * Sign-extend the register if necessary + */ +static void sign_extend(struct jit_ctx *ctx, int rd, int rj, u8 size, bool sign) +{ + /* ABI requires unsigned char/short to be zero-extended */ + if (!sign && (size == 1 || size == 2)) { + if (rd != rj) + move_reg(ctx, rd, rj); + return; + } + + switch (size) { + case 1: + emit_insn(ctx, extwb, rd, rj); + break; + case 2: + emit_insn(ctx, extwh, rd, rj); + break; + case 4: + emit_insn(ctx, addiw, rd, rj, 0); + break; + case 8: + if (rd != rj) + move_reg(ctx, rd, rj); + break; + default: + pr_warn("bpf_jit: invalid size %d for sign_extend\n", size); + } +} + static int __arch_prepare_bpf_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im, const struct btf_func_model *m, struct bpf_tramp_links *tlinks, void *func_addr, u32 flags) { int i, ret, save_ret; - int stack_size = 0, nargs = 0; + int stack_size, nargs; int retval_off, args_off, nargs_off, ip_off, run_ctx_off, sreg_off, tcc_ptr_off; bool is_struct_ops = flags & BPF_TRAMP_F_INDIRECT; void *orig_call = func_addr; @@ -1462,9 +1495,6 @@ struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN]; u32 **branches = NULL; - if (flags & (BPF_TRAMP_F_ORIG_STACK | BPF_TRAMP_F_SHARE_IPMODIFY)) - return -ENOTSUPP; - /* * FP + 8 [ RA to parent func ] return address to parent * function @@ -1495,20 +1525,23 @@ if (m->nr_args > LOONGARCH_MAX_REG_ARGS) return -ENOTSUPP; + /* FIXME: No support of struct argument */ + for (i = 0; i < m->nr_args; i++) { + if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) + return -ENOTSUPP; + } + if (flags & (BPF_TRAMP_F_ORIG_STACK | BPF_TRAMP_F_SHARE_IPMODIFY)) return -ENOTSUPP; - stack_size = 0; - /* Room of trampoline frame to store return address and frame pointer */ - stack_size += 16; + stack_size = 16; save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET); - if (save_ret) { - /* Save BPF R0 and A0 */ - stack_size += 16; - retval_off = stack_size; - } + if (save_ret) + stack_size += 16; /* Save BPF R0 and A0 */ + + retval_off = stack_size; /* Room of trampoline frame to store args */ nargs = m->nr_args; @@ -1593,9 +1626,12 @@ /* Direct jump skips 5 NOP instructions */ else if (is_bpf_text_address((unsigned long)orig_call)) orig_call += LOONGARCH_BPF_FENTRY_NBYTES; + /* Module tracing not supported - cause kernel lockups */ + else if (is_module_text_address((unsigned long)orig_call)) + return -ENOTSUPP; if (flags & BPF_TRAMP_F_CALL_ORIG) { - move_imm(ctx, LOONGARCH_GPR_A0, (const s64)im, false); + move_addr(ctx, LOONGARCH_GPR_A0, (const u64)im); ret = emit_call(ctx, (const u64)__bpf_tramp_enter); if (ret) return ret; @@ -1645,7 +1681,7 @@ if (flags & BPF_TRAMP_F_CALL_ORIG) { im->ip_epilogue = ctx->ro_image + ctx->idx; - move_imm(ctx, LOONGARCH_GPR_A0, (const s64)im, false); + move_addr(ctx, LOONGARCH_GPR_A0, (const u64)im); ret = emit_call(ctx, (const u64)__bpf_tramp_exit); if (ret) goto out; @@ -1655,8 +1691,12 @@ restore_args(ctx, m->nr_args, args_off); if (save_ret) { - emit_insn(ctx, ldd, LOONGARCH_GPR_A0, LOONGARCH_GPR_FP, -retval_off); emit_insn(ctx, ldd, regmap[BPF_REG_0], LOONGARCH_GPR_FP, -(retval_off - 8)); + if (is_struct_ops) + sign_extend(ctx, LOONGARCH_GPR_A0, regmap[BPF_REG_0], + m->ret_size, m->ret_flags & BTF_FMODEL_SIGNED_ARG); + else + emit_insn(ctx, ldd, LOONGARCH_GPR_A0, LOONGARCH_GPR_FP, -retval_off); } emit_insn(ctx, ldd, LOONGARCH_GPR_S1, LOONGARCH_GPR_FP, -sreg_off); @@ -1715,7 +1755,10 @@ jit_fill_hole(image, (unsigned int)(ro_image_end - ro_image)); ret = __arch_prepare_bpf_trampoline(&ctx, im, m, tlinks, func_addr, flags); - if (ret > 0 && validate_code(&ctx) < 0) { + if (ret < 0) + goto out; + + if (validate_code(&ctx) < 0) { ret = -EINVAL; goto out; } @@ -1726,7 +1769,6 @@ goto out; } - bpf_flush_icache(ro_image, ro_image_end); out: kvfree(image); return ret < 0 ? ret : size; @@ -1744,8 +1786,7 @@ ret = __arch_prepare_bpf_trampoline(&ctx, &im, m, tlinks, func_addr, flags); - /* Page align */ - return ret < 0 ? ret : round_up(ret * LOONGARCH_INSN_SIZE, PAGE_SIZE); + return ret < 0 ? ret : ret * LOONGARCH_INSN_SIZE; } struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) --- linux-riscv-6.17-6.17.0.orig/arch/loongarch/pci/pci.c +++ linux-riscv-6.17-6.17.0/arch/loongarch/pci/pci.c @@ -50,11 +50,11 @@ */ lsize = cpu_last_level_cache_line_size(); - BUG_ON(!lsize); + if (lsize) { + pci_dfl_cache_line_size = lsize >> 2; - pci_dfl_cache_line_size = lsize >> 2; - - pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize); + pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize); + } return 0; } --- linux-riscv-6.17-6.17.0.orig/arch/m68k/include/asm/bitops.h +++ linux-riscv-6.17-6.17.0/arch/m68k/include/asm/bitops.h @@ -350,12 +350,12 @@ #include #else -static inline int find_first_zero_bit(const unsigned long *vaddr, - unsigned size) +static inline unsigned long find_first_zero_bit(const unsigned long *vaddr, + unsigned long size) { const unsigned long *p = vaddr; - int res = 32; - unsigned int words; + unsigned long res = 32; + unsigned long words; unsigned long num; if (!size) @@ -376,8 +376,9 @@ } #define find_first_zero_bit find_first_zero_bit -static inline int find_next_zero_bit(const unsigned long *vaddr, int size, - int offset) +static inline unsigned long find_next_zero_bit(const unsigned long *vaddr, + unsigned long size, + unsigned long offset) { const unsigned long *p = vaddr + (offset >> 5); int bit = offset & 31UL, res; @@ -406,11 +407,12 @@ } #define find_next_zero_bit find_next_zero_bit -static inline int find_first_bit(const unsigned long *vaddr, unsigned size) +static inline unsigned long find_first_bit(const unsigned long *vaddr, + unsigned long size) { const unsigned long *p = vaddr; - int res = 32; - unsigned int words; + unsigned long res = 32; + unsigned long words; unsigned long num; if (!size) @@ -431,8 +433,9 @@ } #define find_first_bit find_first_bit -static inline int find_next_bit(const unsigned long *vaddr, int size, - int offset) +static inline unsigned long find_next_bit(const unsigned long *vaddr, + unsigned long size, + unsigned long offset) { const unsigned long *p = vaddr + (offset >> 5); int bit = offset & 31UL, res; --- linux-riscv-6.17-6.17.0.orig/arch/m68k/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/m68k/kernel/asm-offsets.c @@ -9,6 +9,7 @@ * #defines from the assembly-language output. */ +#define COMPILE_OFFSETS #define ASM_OFFSETS_C #include --- linux-riscv-6.17-6.17.0.orig/arch/m68k/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/m68k/kernel/process.c @@ -141,7 +141,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct fork_frame { --- linux-riscv-6.17-6.17.0.orig/arch/microblaze/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/microblaze/kernel/asm-offsets.c @@ -7,6 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/microblaze/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/microblaze/kernel/process.c @@ -54,7 +54,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct pt_regs *childregs = task_pt_regs(p); --- linux-riscv-6.17-6.17.0.orig/arch/mips/boot/dts/econet/en751221.dtsi +++ linux-riscv-6.17-6.17.0/arch/mips/boot/dts/econet/en751221.dtsi @@ -18,7 +18,7 @@ cpu@0 { device_type = "cpu"; - compatible = "mips,mips24KEc"; + compatible = "mips,mips34Kc"; reg = <0>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/mips/boot/dts/lantiq/danube.dtsi +++ linux-riscv-6.17-6.17.0/arch/mips/boot/dts/lantiq/danube.dtsi @@ -5,8 +5,12 @@ compatible = "lantiq,xway", "lantiq,danube"; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "mips,mips24Kc"; + reg = <0>; }; }; @@ -100,6 +104,8 @@ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ reg = <0x7000000 0x8000 /* config space */ 0xe105400 0x400>; /* pci bridge */ + + device_type = "pci"; }; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/mips/boot/dts/lantiq/danube_easy50712.dts +++ linux-riscv-6.17-6.17.0/arch/mips/boot/dts/lantiq/danube_easy50712.dts @@ -4,6 +4,8 @@ /include/ "danube.dtsi" / { + model = "Intel EASY50712"; + chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; }; @@ -94,7 +96,7 @@ lantiq,tx-burst-length = <4>; }; - stp0: stp@e100bb0 { + stp0: gpio@e100bb0 { #gpio-cells = <2>; compatible = "lantiq,gpio-stp-xway"; gpio-controller; --- linux-riscv-6.17-6.17.0.orig/arch/mips/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/mips/kernel/asm-offsets.c @@ -9,6 +9,8 @@ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. */ +#define COMPILE_OFFSETS + #include #include #include --- linux-riscv-6.17-6.17.0.orig/arch/mips/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/mips/kernel/process.c @@ -107,7 +107,7 @@ */ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct thread_info *ti = task_thread_info(p); @@ -692,7 +692,7 @@ /* Space for the VDSO, data page & GIC user page */ if (current->thread.abi) { top -= PAGE_ALIGN(current->thread.abi->vdso->size); - top -= PAGE_SIZE; + top -= VDSO_NR_PAGES * PAGE_SIZE; top -= mips_gic_present() ? PAGE_SIZE : 0; /* Space to randomize the VDSO base */ --- linux-riscv-6.17-6.17.0.orig/arch/mips/lantiq/xway/sysctrl.c +++ linux-riscv-6.17-6.17.0/arch/mips/lantiq/xway/sysctrl.c @@ -485,7 +485,7 @@ /* add our generic xway clocks */ clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI); clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT); - clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP); + clkdev_add_pmu("1e100bb0.gpio", NULL, 1, 0, PMU_STP); clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1); clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA); clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI); --- linux-riscv-6.17-6.17.0.orig/arch/mips/mm/tlb-r4k.c +++ linux-riscv-6.17-6.17.0/arch/mips/mm/tlb-r4k.c @@ -12,9 +12,11 @@ #include #include #include +#include #include #include #include +#include #include #include @@ -508,58 +510,95 @@ __setup("ntlb=", set_ntlb); -/* Initialise all TLB entries with unique values */ -static void r4k_tlb_uniquify(void) -{ - int entry = num_wired_entries(); - htw_stop(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); +/* Comparison function for EntryHi VPN fields. */ +static int r4k_vpn_cmp(const void *a, const void *b) +{ + long v = *(unsigned long *)a - *(unsigned long *)b; + int s = sizeof(long) > sizeof(int) ? sizeof(long) * 8 - 1: 0; + return s ? (v != 0) | v >> s : v; +} - while (entry < current_cpu_data.tlbsize) { - unsigned long asid_mask = cpu_asid_mask(¤t_cpu_data); - unsigned long asid = 0; - int idx; +/* + * Initialise all TLB entries with unique values that do not clash with + * what we have been handed over and what we'll be using ourselves. + */ +static void __ref r4k_tlb_uniquify(void) +{ + int tlbsize = current_cpu_data.tlbsize; + bool use_slab = slab_is_available(); + int start = num_wired_entries(); + phys_addr_t tlb_vpn_size; + unsigned long *tlb_vpns; + unsigned long vpn_mask; + int cnt, ent, idx, i; + + vpn_mask = GENMASK(cpu_vmbits - 1, 13); + vpn_mask |= IS_ENABLED(CONFIG_64BIT) ? 3ULL << 62 : 1 << 31; + + tlb_vpn_size = tlbsize * sizeof(*tlb_vpns); + tlb_vpns = (use_slab ? + kmalloc(tlb_vpn_size, GFP_KERNEL) : + memblock_alloc_raw(tlb_vpn_size, sizeof(*tlb_vpns))); + if (WARN_ON(!tlb_vpns)) + return; /* Pray local_flush_tlb_all() is good enough. */ - /* Skip wired MMID to make ginvt_mmid work */ - if (cpu_has_mmid) - asid = MMID_KERNEL_WIRED + 1; + htw_stop(); - /* Check for match before using UNIQUE_ENTRYHI */ - do { - if (cpu_has_mmid) { - write_c0_memorymapid(asid); - write_c0_entryhi(UNIQUE_ENTRYHI(entry)); - } else { - write_c0_entryhi(UNIQUE_ENTRYHI(entry) | asid); - } - mtc0_tlbw_hazard(); - tlb_probe(); - tlb_probe_hazard(); - idx = read_c0_index(); - /* No match or match is on current entry */ - if (idx < 0 || idx == entry) - break; - /* - * If we hit a match, we need to try again with - * a different ASID. - */ - asid++; - } while (asid < asid_mask); + for (i = start, cnt = 0; i < tlbsize; i++, cnt++) { + unsigned long vpn; - if (idx >= 0 && idx != entry) - panic("Unable to uniquify TLB entry %d", idx); + write_c0_index(i); + mtc0_tlbr_hazard(); + tlb_read(); + tlb_read_hazard(); + vpn = read_c0_entryhi(); + vpn &= vpn_mask & PAGE_MASK; + tlb_vpns[cnt] = vpn; - write_c0_index(entry); + /* Prevent any large pages from overlapping regular ones. */ + write_c0_pagemask(read_c0_pagemask() & PM_DEFAULT_MASK); mtc0_tlbw_hazard(); tlb_write_indexed(); - entry++; + tlbw_use_hazard(); } + sort(tlb_vpns, cnt, sizeof(tlb_vpns[0]), r4k_vpn_cmp, NULL); + + write_c0_pagemask(PM_DEFAULT_MASK); + write_c0_entrylo0(0); + write_c0_entrylo1(0); + + idx = 0; + ent = tlbsize; + for (i = start; i < tlbsize; i++) + while (1) { + unsigned long entryhi, vpn; + + entryhi = UNIQUE_ENTRYHI(ent); + vpn = entryhi & vpn_mask & PAGE_MASK; + + if (idx >= cnt || vpn < tlb_vpns[idx]) { + write_c0_entryhi(entryhi); + write_c0_index(i); + mtc0_tlbw_hazard(); + tlb_write_indexed(); + ent++; + break; + } else if (vpn == tlb_vpns[idx]) { + ent++; + } else { + idx++; + } + } + tlbw_use_hazard(); htw_start(); flush_micro_tlb(); + if (use_slab) + kfree(tlb_vpns); + else + memblock_free(tlb_vpns, tlb_vpn_size); } /* @@ -602,6 +641,7 @@ /* From this point on the ARC firmware is dead. */ r4k_tlb_uniquify(); + local_flush_tlb_all(); /* Did I tell you that ARC SUCKS? */ } --- linux-riscv-6.17-6.17.0.orig/arch/mips/mti-malta/malta-init.c +++ linux-riscv-6.17-6.17.0/arch/mips/mti-malta/malta-init.c @@ -241,16 +241,22 @@ #endif /* - * Setup the Malta max (2GB) memory for PCI DMA in host bridge - * in transparent addressing mode. + * Set up memory mapping in host bridge for PCI DMA masters, + * in transparent addressing mode. For EVA use the Malta + * maximum of 2 GiB memory in the alias space at 0x80000000 + * as per PHYS_OFFSET. Otherwise use 256 MiB of memory in + * the regular space, avoiding mapping the PCI MMIO window + * for DMA as it seems to confuse the system controller's + * logic, causing PCI MMIO to stop working. */ - mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH; - MSC_WRITE(MSC01_PCI_BAR0, mask); - MSC_WRITE(MSC01_PCI_HEAD4, mask); + mask = PHYS_OFFSET ? PHYS_OFFSET : 0xf0000000; + MSC_WRITE(MSC01_PCI_BAR0, + mask | PCI_BASE_ADDRESS_MEM_PREFETCH); + MSC_WRITE(MSC01_PCI_HEAD4, + PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH); - mask &= MSC01_PCI_BAR0_SIZE_MSK; MSC_WRITE(MSC01_PCI_P2SCMSKL, mask); - MSC_WRITE(MSC01_PCI_P2SCMAPL, mask); + MSC_WRITE(MSC01_PCI_P2SCMAPL, PHYS_OFFSET); /* Don't handle target retries indefinitely. */ if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == --- linux-riscv-6.17-6.17.0.orig/arch/mips/mti-malta/malta-setup.c +++ linux-riscv-6.17-6.17.0/arch/mips/mti-malta/malta-setup.c @@ -47,7 +47,7 @@ .name = "keyboard", .start = 0x60, .end = 0x6f, - .flags = IORESOURCE_IO | IORESOURCE_BUSY + .flags = IORESOURCE_IO }, { .name = "dma page reg", --- linux-riscv-6.17-6.17.0.orig/arch/mips/sgi-ip22/ip22-platform.c +++ linux-riscv-6.17-6.17.0/arch/mips/sgi-ip22/ip22-platform.c @@ -221,3 +221,35 @@ } device_initcall(sgi_ds1286_devinit); + +#define SGI_ZILOG_BASE (HPC3_CHIP0_BASE + \ + offsetof(struct hpc3_regs, pbus_extregs[6]) + \ + offsetof(struct sgioc_regs, uart)) + +static struct resource sgi_zilog_resources[] = { + { + .start = SGI_ZILOG_BASE, + .end = SGI_ZILOG_BASE + 15, + .flags = IORESOURCE_MEM + }, + { + .start = SGI_SERIAL_IRQ, + .end = SGI_SERIAL_IRQ, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device zilog_device = { + .name = "ip22zilog", + .id = 0, + .num_resources = ARRAY_SIZE(sgi_zilog_resources), + .resource = sgi_zilog_resources, +}; + + +static int __init sgi_zilog_devinit(void) +{ + return platform_device_register(&zilog_device); +} + +device_initcall(sgi_zilog_devinit); --- linux-riscv-6.17-6.17.0.orig/arch/nios2/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/nios2/kernel/asm-offsets.c @@ -2,6 +2,7 @@ /* * Copyright (C) 2011 Tobias Klauser */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/nios2/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/nios2/kernel/process.c @@ -101,7 +101,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct pt_regs *childregs = task_pt_regs(p); --- linux-riscv-6.17-6.17.0.orig/arch/nios2/kernel/setup.c +++ linux-riscv-6.17-6.17.0/arch/nios2/kernel/setup.c @@ -142,6 +142,20 @@ *max_high = PFN_DOWN(memblock_end_of_DRAM()); } +static void __init adjust_lowmem_bounds(void) +{ + phys_addr_t block_start, block_end; + u64 i; + phys_addr_t memblock_limit = 0; + + for_each_mem_range(i, &block_start, &block_end) { + if (block_end > memblock_limit) + memblock_limit = block_end; + } + + memblock_set_current_limit(memblock_limit); +} + void __init setup_arch(char **cmdline_p) { console_verbose(); @@ -157,6 +171,7 @@ /* Keep a copy of command line */ *cmdline_p = boot_command_line; + adjust_lowmem_bounds(); find_limits(&min_low_pfn, &max_low_pfn, &max_pfn); memblock_reserve(__pa_symbol(_stext), _end - _stext); --- linux-riscv-6.17-6.17.0.orig/arch/openrisc/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/openrisc/kernel/asm-offsets.c @@ -18,6 +18,7 @@ * compile this file to assembler, and then extract the * #defines from the assembly-language output. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/openrisc/kernel/module.c +++ linux-riscv-6.17-6.17.0/arch/openrisc/kernel/module.c @@ -55,6 +55,10 @@ value |= *location & 0xfc000000; *location = value; break; + case R_OR1K_32_PCREL: + value -= (uint32_t)location; + *location = value; + break; case R_OR1K_AHI16: /* Adjust the operand to match with a signed LO16. */ value += 0x8000; --- linux-riscv-6.17-6.17.0.orig/arch/openrisc/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/openrisc/kernel/process.c @@ -165,7 +165,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct pt_regs *userregs; --- linux-riscv-6.17-6.17.0.orig/arch/parisc/include/asm/video.h +++ linux-riscv-6.17-6.17.0/arch/parisc/include/asm/video.h @@ -6,7 +6,7 @@ struct device; -#if defined(CONFIG_STI_CORE) +#if defined(CONFIG_STI_CORE) && defined(CONFIG_VIDEO) bool video_is_primary_device(struct device *dev); #define video_is_primary_device video_is_primary_device #endif --- linux-riscv-6.17-6.17.0.orig/arch/parisc/include/uapi/asm/ioctls.h +++ linux-riscv-6.17-6.17.0/arch/parisc/include/uapi/asm/ioctls.h @@ -10,10 +10,10 @@ #define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */ #define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */ #define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */ -#define TCGETA _IOR('T', 1, struct termio) -#define TCSETA _IOW('T', 2, struct termio) -#define TCSETAW _IOW('T', 3, struct termio) -#define TCSETAF _IOW('T', 4, struct termio) +#define TCGETA 0x40125401 +#define TCSETA 0x80125402 +#define TCSETAW 0x80125403 +#define TCSETAF 0x80125404 #define TCSBRK _IO('T', 5) #define TCXONC _IO('T', 6) #define TCFLSH _IO('T', 7) --- linux-riscv-6.17-6.17.0.orig/arch/parisc/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/parisc/kernel/asm-offsets.c @@ -13,6 +13,7 @@ * Copyright (C) 2002 Randolph Chung * Copyright (C) 2003 James Bottomley */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/parisc/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/parisc/kernel/process.c @@ -201,7 +201,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct pt_regs *cregs = &(p->thread.regs); --- linux-riscv-6.17-6.17.0.orig/arch/parisc/kernel/unwind.c +++ linux-riscv-6.17-6.17.0/arch/parisc/kernel/unwind.c @@ -35,6 +35,8 @@ #define KERNEL_START (KERNEL_BINARY_TEXT_START) +#define ALIGNMENT_OK(ptr, type) (((ptr) & (sizeof(type) - 1)) == 0) + extern struct unwind_table_entry __start___unwind[]; extern struct unwind_table_entry __stop___unwind[]; @@ -257,12 +259,15 @@ if (pc_is_kernel_fn(pc, _switch_to) || pc == (unsigned long)&_switch_to_ret) { info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE; - info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET); + if (ALIGNMENT_OK(info->prev_sp, long)) + info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET); + else + info->prev_ip = info->prev_sp = 0; return 1; } #ifdef CONFIG_IRQSTACKS - if (pc == (unsigned long)&_call_on_stack) { + if (pc == (unsigned long)&_call_on_stack && ALIGNMENT_OK(info->sp, long)) { info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ); info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET); return 1; @@ -370,8 +375,10 @@ info->prev_sp = info->sp - frame_size; if (e->Millicode) info->rp = info->r31; - else if (rpoffset) + else if (rpoffset && ALIGNMENT_OK(info->prev_sp, long)) info->rp = *(unsigned long *)(info->prev_sp - rpoffset); + else + info->rp = 0; info->prev_ip = info->rp; info->rp = 0; } --- linux-riscv-6.17-6.17.0.orig/arch/parisc/lib/memcpy.c +++ linux-riscv-6.17-6.17.0/arch/parisc/lib/memcpy.c @@ -41,7 +41,6 @@ mtsp(get_kernel_space(), SR_TEMP2); /* Check region is user accessible */ - if (start) while (start < end) { if (!prober_user(SR_TEMP1, start)) { newlen = (start - (unsigned long) src); --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/Kconfig +++ linux-riscv-6.17-6.17.0/arch/powerpc/Kconfig @@ -971,6 +971,10 @@ when dealing with POWER5 cpus at a cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC + def_bool y + depends on SMP + config PPC_DENORMALISATION bool "PowerPC denormalisation exception handling" depends on PPC_BOOK3S_64 --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/Makefile +++ linux-riscv-6.17-6.17.0/arch/powerpc/Makefile @@ -58,7 +58,7 @@ # There is a corresponding test in arch/powerpc/lib/Makefile KBUILD_LDFLAGS_MODULE += --save-restore-funcs else -KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o +KBUILD_LDFLAGS_MODULE += $(objtree)/arch/powerpc/lib/crtsavres.o endif ifdef CONFIG_CPU_LITTLE_ENDIAN @@ -225,7 +225,7 @@ all: zImage # With make 3.82 we cannot mix normal and wildcard targets -BOOT_TARGETS1 := zImage zImage.initrd uImage +BOOT_TARGETS1 := zImage zImage.initrd uImage vmlinux.strip BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.% PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2) --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/include/asm/book3s/32/pgalloc.h +++ linux-riscv-6.17-6.17.0/arch/powerpc/include/asm/book3s/32/pgalloc.h @@ -7,8 +7,14 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), - pgtable_gfp_flags(mm, GFP_KERNEL)); + pgd_t *pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), + pgtable_gfp_flags(mm, GFP_KERNEL)); + +#ifdef CONFIG_PPC_BOOK3S_603 + memcpy(pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD, + (MAX_PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); +#endif + return pgd; } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/include/asm/cputhreads.h +++ linux-riscv-6.17-6.17.0/arch/powerpc/include/asm/cputhreads.h @@ -3,6 +3,7 @@ #define _ASM_POWERPC_CPUTHREADS_H #ifndef __ASSEMBLY__ +#include #include #include --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/include/asm/nohash/pgalloc.h +++ linux-riscv-6.17-6.17.0/arch/powerpc/include/asm/nohash/pgalloc.h @@ -22,7 +22,7 @@ pgd_t *pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), pgtable_gfp_flags(mm, GFP_KERNEL)); -#if defined(CONFIG_PPC_8xx) || defined(CONFIG_PPC_BOOK3S_603) +#ifdef CONFIG_PPC_8xx memcpy(pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD, (MAX_PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); #endif --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/include/asm/pgtable.h +++ linux-riscv-6.17-6.17.0/arch/powerpc/include/asm/pgtable.h @@ -20,18 +20,6 @@ #include #endif /* !CONFIG_PPC_BOOK3S */ -/* - * Protection used for kernel text. We want the debuggers to be able to - * set breakpoints anywhere, so don't write protect the kernel text - * on platforms where such control is possible. - */ -#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) || \ - defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE) -#define PAGE_KERNEL_TEXT PAGE_KERNEL_X -#else -#define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX -#endif - /* Make modules code happy. We don't set RO yet */ #define PAGE_KERNEL_EXEC PAGE_KERNEL_X --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/include/asm/topology.h +++ linux-riscv-6.17-6.17.0/arch/powerpc/include/asm/topology.h @@ -131,6 +131,8 @@ #ifdef CONFIG_SMP #include +struct cpumask *cpu_coregroup_mask(int cpu); + #ifdef CONFIG_PPC64 #include --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/asm-offsets.c @@ -8,6 +8,7 @@ * compile this file to assembler, and then extract the * #defines from the assembly-language output. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/eeh_driver.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/eeh_driver.c @@ -334,7 +334,7 @@ rc = driver->err_handler->error_detected(pdev, pci_channel_io_frozen); edev->in_error = true; - pci_uevent_ers(pdev, PCI_ERS_RESULT_NONE); + pci_uevent_ers(pdev, rc); return rc; } --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/entry_32.S +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/entry_32.S @@ -263,10 +263,9 @@ mtspr SPRN_SRR1,r12 BEGIN_FTR_SECTION + lwarx r0,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ -FTR_SECTION_ELSE - lwarx r0,0,r1 -ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) lwz r3,_CCR(r1) lwz r4,_LINK(r1) @@ -306,10 +305,9 @@ mtspr SPRN_SRR1,r12 BEGIN_FTR_SECTION + lwarx r0,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) stwcx. r0,0,r1 /* to clear the reservation */ -FTR_SECTION_ELSE - lwarx r0,0,r1 -ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) lwz r3,_LINK(r1) lwz r4,_CTR(r1) --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/fadump.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/fadump.c @@ -1747,6 +1747,9 @@ { phys_addr_t range_start, range_end; + if (!fw_dump.fadump_enabled) + return; + if (!fw_dump.param_area_supported || fw_dump.dump_active) return; --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/head_8xx.S +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/head_8xx.S @@ -162,7 +162,7 @@ * For the MPC8xx, this is a software tablewalk to load the instruction * TLB. The task switch loads the M_TWB register with the pointer to the first * level table. - * If we discover there is no second level table (value is zero) or if there + * If there is no second level table (value is zero) or if there * is an invalid pte, we load that into the TLB, which causes another fault * into the TLB Error interrupt where we can handle such problems. * We have to use the MD_xxx registers for the tablewalk because the @@ -183,9 +183,6 @@ mtspr SPRN_SPRG_SCRATCH2, r10 mtspr SPRN_M_TW, r11 - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ mfspr r10, SPRN_SRR0 /* Get effective address of fault */ INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11) mtspr SPRN_MD_EPN, r10 @@ -228,10 +225,6 @@ mtspr SPRN_SPRG_SCRATCH2, r10 mtspr SPRN_M_TW, r11 - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - mfspr r10, SPRN_MD_EPN mfspr r10, SPRN_M_TWB /* Get level 1 table */ lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10) /* Get level 1 entry */ --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/module_64.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/module_64.c @@ -1139,7 +1139,7 @@ /* reserve stubs */ for (i = 0; i < num_stubs; i++) - if (patch_u32((void *)&stub->funcdata, PPC_RAW_NOP())) + if (patch_u32((void *)&stub[i].funcdata, PPC_RAW_NOP())) return -1; #endif --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/pci-common.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/pci-common.c @@ -360,6 +360,7 @@ } return NULL; } +EXPORT_SYMBOL(pci_find_hose_for_OF_device); struct pci_controller *pci_find_controller_for_domain(int domain_nr) { @@ -1630,6 +1631,7 @@ { return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); } +EXPORT_SYMBOL_GPL(early_find_capability); struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) { --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/process.c @@ -1805,7 +1805,7 @@ f = ret_from_kernel_user_thread; } else { struct pt_regs *regs = current_pt_regs(); - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; /* Copy registers */ --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/setup-common.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/setup-common.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -68,6 +69,7 @@ #include #include #include +#include #include "setup.h" @@ -922,6 +924,16 @@ */ initialize_cache_info(); + /* + * Lock down the kernel if booted in secure mode. This is required to + * maintain kernel integrity. + */ + if (IS_ENABLED(CONFIG_LOCK_DOWN_IN_SECURE_BOOT)) { + if (is_ppc_secureboot_enabled()) + security_lock_kernel_down("PowerNV Secure Boot mode", + LOCKDOWN_INTEGRITY_MAX); + } + /* Initialize RTAS if available. */ rtas_initialize(); --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/smp.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/smp.c @@ -1028,19 +1028,19 @@ * We can't just pass cpu_l2_cache_mask() directly because * returns a non-const pointer and the compiler barfs on that. */ -static const struct cpumask *shared_cache_mask(int cpu) +static const struct cpumask *tl_cache_mask(struct sched_domain_topology_level *tl, int cpu) { return per_cpu(cpu_l2_cache_map, cpu); } #ifdef CONFIG_SCHED_SMT -static const struct cpumask *smallcore_smt_mask(int cpu) +static const struct cpumask *tl_smallcore_smt_mask(struct sched_domain_topology_level *tl, int cpu) { return cpu_smallcore_mask(cpu); } #endif -static struct cpumask *cpu_coregroup_mask(int cpu) +struct cpumask *cpu_coregroup_mask(int cpu) { return per_cpu(cpu_coregroup_map, cpu); } @@ -1054,11 +1054,6 @@ return coregroup_enabled; } -static const struct cpumask *cpu_mc_mask(int cpu) -{ - return cpu_coregroup_mask(cpu); -} - static int __init init_big_cores(void) { int cpu; @@ -1448,7 +1443,7 @@ return false; } - cpumask_and(*mask, cpu_online_mask, cpu_cpu_mask(cpu)); + cpumask_and(*mask, cpu_online_mask, cpu_node_mask(cpu)); /* Update l2-cache mask with all the CPUs that are part of submask */ or_cpumasks_related(cpu, cpu, submask_fn, cpu_l2_cache_mask); @@ -1538,7 +1533,7 @@ return; } - cpumask_and(*mask, cpu_online_mask, cpu_cpu_mask(cpu)); + cpumask_and(*mask, cpu_online_mask, cpu_node_mask(cpu)); /* Update coregroup mask with all the CPUs that are part of submask */ or_cpumasks_related(cpu, cpu, submask_fn, cpu_coregroup_mask); @@ -1601,7 +1596,7 @@ /* If chip_id is -1; limit the cpu_core_mask to within PKG */ if (chip_id == -1) - cpumask_and(mask, mask, cpu_cpu_mask(cpu)); + cpumask_and(mask, mask, cpu_node_mask(cpu)); for_each_cpu(i, mask) { if (chip_id == cpu_to_chip_id(i)) { @@ -1701,22 +1696,22 @@ if (has_big_cores) { pr_info("Big cores detected but using small core scheduling\n"); powerpc_topology[i++] = - SDTL_INIT(smallcore_smt_mask, powerpc_smt_flags, SMT); + SDTL_INIT(tl_smallcore_smt_mask, powerpc_smt_flags, SMT); } else { - powerpc_topology[i++] = SDTL_INIT(cpu_smt_mask, powerpc_smt_flags, SMT); + powerpc_topology[i++] = SDTL_INIT(tl_smt_mask, powerpc_smt_flags, SMT); } #endif if (shared_caches) { powerpc_topology[i++] = - SDTL_INIT(shared_cache_mask, powerpc_shared_cache_flags, CACHE); + SDTL_INIT(tl_cache_mask, powerpc_shared_cache_flags, CACHE); } if (has_coregroup_support()) { powerpc_topology[i++] = - SDTL_INIT(cpu_mc_mask, powerpc_shared_proc_flags, MC); + SDTL_INIT(tl_mc_mask, powerpc_shared_proc_flags, MC); } - powerpc_topology[i++] = SDTL_INIT(cpu_cpu_mask, powerpc_shared_proc_flags, PKG); + powerpc_topology[i++] = SDTL_INIT(tl_pkg_mask, powerpc_shared_proc_flags, PKG); /* There must be one trailing NULL entry left. */ BUG_ON(i >= ARRAY_SIZE(powerpc_topology) - 1); --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kernel/trace/ftrace.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kernel/trace/ftrace.c @@ -488,8 +488,10 @@ return ret; /* Set up out-of-line stub */ - if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) - return ftrace_init_ool_stub(mod, rec); + if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) { + ret = ftrace_init_ool_stub(mod, rec); + goto out; + } /* Nop-out the ftrace location */ new = ppc_inst(PPC_RAW_NOP()); @@ -520,6 +522,10 @@ return -EINVAL; } +out: + if (!ret) + ret = ftrace_rec_set_nop_ops(rec); + return ret; } --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/kexec/ranges.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/kexec/ranges.c @@ -697,8 +697,8 @@ * two half. */ else { + size = mem_rngs->ranges[i].end - end + 1; mem_rngs->ranges[i].end = base - 1; - size = mem_rngs->ranges[i].end - end; ret = add_mem_range(mem_ranges, end + 1, size); } } --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/lib/sstep.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/lib/sstep.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/mm/book3s32/mmu.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/mm/book3s32/mmu.c @@ -204,7 +204,7 @@ for (i = 0; i < nb - 1 && base < top;) { size = bat_block_size(base, top); - setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); + setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X); base += size; } if (base < top) { @@ -215,7 +215,7 @@ pr_warn("Some RW data is getting mapped X. " "Adjust CONFIG_DATA_SHIFT to avoid that.\n"); } - setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); + setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X); base += size; } for (; i < nb; i++) --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/mm/book3s64/hash_utils.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/mm/book3s64/hash_utils.c @@ -1302,11 +1302,14 @@ unsigned long table; unsigned long pteg_count; unsigned long prot; - phys_addr_t base = 0, size = 0, end; + phys_addr_t base = 0, size = 0, end, limit = MEMBLOCK_ALLOC_ANYWHERE; u64 i; DBG(" -> htab_initialize()\n"); + if (firmware_has_feature(FW_FEATURE_LPAR)) + limit = ppc64_rma_size; + if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) { mmu_kernel_ssize = MMU_SEGSIZE_1T; mmu_highuser_ssize = MMU_SEGSIZE_1T; @@ -1322,7 +1325,7 @@ // Too early to use nr_cpu_ids, so use NR_CPUS tmp = memblock_phys_alloc_range(sizeof(struct stress_hpt_struct) * NR_CPUS, __alignof__(struct stress_hpt_struct), - 0, MEMBLOCK_ALLOC_ANYWHERE); + MEMBLOCK_LOW_LIMIT, limit); memset((void *)tmp, 0xff, sizeof(struct stress_hpt_struct) * NR_CPUS); stress_hpt_struct = __va(tmp); @@ -1356,11 +1359,10 @@ mmu_hash_ops.hpte_clear_all(); #endif } else { - unsigned long limit = MEMBLOCK_ALLOC_ANYWHERE; table = memblock_phys_alloc_range(htab_size_bytes, htab_size_bytes, - 0, limit); + MEMBLOCK_LOW_LIMIT, limit); if (!table) panic("ERROR: Failed to allocate %pa bytes below %pa\n", &htab_size_bytes, &limit); --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/mm/pgtable_32.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/mm/pgtable_32.c @@ -104,7 +104,7 @@ p = memstart_addr + s; for (; s < top; s += PAGE_SIZE) { ktext = core_kernel_text(v); - map_kernel_page(v, p, ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL); + map_kernel_page(v, p, ktext ? PAGE_KERNEL_X : PAGE_KERNEL); v += PAGE_SIZE; p += PAGE_SIZE; } --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/mm/ptdump/hashpagetable.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/mm/ptdump/hashpagetable.c @@ -216,6 +216,8 @@ vpn = hpt_vpn(ea, vsid, ssize); hash = hpt_hash(vpn, shift, ssize); want_v = hpte_encode_avpn(vpn, psize, ssize); + if (cpu_has_feature(CPU_FTR_ARCH_300)) + want_v = hpte_old_to_new_v(want_v); /* to check in the secondary hash table, we invert the hash */ if (!primary) @@ -229,6 +231,10 @@ /* HPTE matches */ *v = be64_to_cpu(hptep->v); *r = be64_to_cpu(hptep->r); + if (cpu_has_feature(CPU_FTR_ARCH_300)) { + *v = hpte_new_to_old_v(*v, *r); + *r = hpte_new_to_old_r(*r); + } return 0; } ++hpte_group; --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/platforms/powernv/pci-ioda.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1854,7 +1854,7 @@ return 0; out: - irq_domain_free_irqs_parent(domain, virq, i - 1); + irq_domain_free_irqs_parent(domain, virq, i); msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, nr_irqs); return ret; } --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/platforms/pseries/cmm.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/platforms/pseries/cmm.c @@ -545,7 +545,7 @@ /* balloon page list reference */ put_page(page); - return MIGRATEPAGE_SUCCESS; + return 0; } static void cmm_balloon_compaction_init(void) --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/platforms/pseries/msi.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/platforms/pseries/msi.c @@ -593,7 +593,7 @@ out: /* TODO: handle RTAS cleanup in ->msi_finish() ? */ - irq_domain_free_irqs_parent(domain, virq, i - 1); + irq_domain_free_irqs_parent(domain, virq, i); return ret; } --- linux-riscv-6.17-6.17.0.orig/arch/powerpc/platforms/pseries/vio.c +++ linux-riscv-6.17-6.17.0/arch/powerpc/platforms/pseries/vio.c @@ -39,7 +39,6 @@ .name = "vio", .type = "", .dev.init_name = "vio", - .dev.bus = &vio_bus_type, }; #ifdef CONFIG_PPC_SMLPAR --- linux-riscv-6.17-6.17.0.orig/arch/riscv/Kconfig +++ linux-riscv-6.17-6.17.0/arch/riscv/Kconfig @@ -53,6 +53,7 @@ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAS_UBSAN select ARCH_HAS_VDSO_ARCH_DATA if GENERIC_VDSO_DATA_STORE + select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_KEEP_MEMBLOCK if ACPI select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE if 64BIT && MMU select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX --- linux-riscv-6.17-6.17.0.orig/arch/riscv/Makefile +++ linux-riscv-6.17-6.17.0/arch/riscv/Makefile @@ -166,7 +166,7 @@ boot-image-$(CONFIG_KERNEL_ZSTD) := Image.zst boot-image-$(CONFIG_KERNEL_XZ) := Image.xz ifdef CONFIG_RISCV_M_MODE -boot-image-$(CONFIG_ARCH_CANAAN) := loader.bin +boot-image-$(CONFIG_SOC_CANAAN_K210) := loader.bin endif boot-image-$(CONFIG_EFI_ZBOOT) := vmlinuz.efi boot-image-$(CONFIG_XIP_KERNEL) := xipImage --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts @@ -22,6 +22,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi_connector: connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out_connector>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -42,16 +53,13 @@ vin-supply = <®_vcc>; }; - /* - * This regulator is PWM-controlled, but the PWM controller is not - * yet supported, so fix the regulator to its default voltage. - */ reg_vdd_cpu: vdd-cpu { - compatible = "regulator-fixed"; + compatible = "pwm-regulator"; + pwms = <&pwm 0 50000 0>; + pwm-supply = <®_vcc>; regulator-name = "vdd-cpu"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <®_vcc>; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1160000>; }; }; @@ -63,6 +71,10 @@ clock-frequency = <24000000>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -76,6 +88,20 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_connector: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&hdmi_phy { + status = "okay"; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -98,6 +124,12 @@ status = "okay"; }; +&pwm { + pinctrl-0 = <&pwm0_pd16_pin>; + pinctrl-names = "default"; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0_pb8_pins>; pinctrl-names = "default"; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts @@ -7,6 +7,40 @@ model = "Sipeed Lichee RV 86 Panel (480p)"; compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv", "allwinner,sun20i-d1"; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_vcc>; + pwms = <&pwm 7 50000 0>; + }; + + spi { + compatible = "spi-gpio"; + cs-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */ + mosi-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */ + sck-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sitronix,st7701s"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ + spi-3wire; + + port { + panel_in_tcon_lcd0: endpoint { + remote-endpoint = <&tcon_lcd0_out_panel>; + }; + }; + }; + }; +}; + +&de { + status = "okay"; }; &i2c2 { @@ -27,3 +61,20 @@ wakeup-source; }; }; + +&pwm { + pinctrl-0 = <&pwm7_pd22_pin>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tcon_lcd0 { + pinctrl-0 = <&lcd_rgb666_pins>; + pinctrl-names = "default"; +}; + +&tcon_lcd0_out { + tcon_lcd0_out_panel: endpoint { + remote-endpoint = <&panel_in_tcon_lcd0>; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi @@ -9,6 +9,12 @@ ethernet1 = &xr829; }; + audio_amplifier: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + sound-name-prefix = "Amplifier"; + }; + dmic_codec: dmic-codec { compatible = "dmic-codec"; num-channels = <2>; @@ -52,6 +58,21 @@ }; }; +&codec { + aux-devs = <&audio_amplifier>; + routing = "Internal Speaker", "Amplifier OUTL", + "Internal Speaker", "Amplifier OUTR", + "Amplifier INL", "HPOUTL", + "Amplifier INR", "HPOUTR", + "LINEINL", "HPOUTL", + "LINEINR", "HPOUTR", + "MICIN3", "Internal Microphone", + "Internal Microphone", "HBIAS"; + widgets = "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + status = "okay"; +}; + &dmic { pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>; pinctrl-names = "default"; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts @@ -43,12 +43,39 @@ }; }; + hdmi_connector: connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out_connector>; + }; + }; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ }; }; +&codec { + routing = "Internal Speaker", "HPOUTL", + "Internal Speaker", "HPOUTR", + "LINEINL", "HPOUTL", + "LINEINR", "HPOUTR", + "MICIN3", "Internal Microphone", + "Internal Microphone", "HBIAS"; + widgets = "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + status = "okay"; +}; + +&de { + status = "okay"; +}; + &dmic { pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>; pinctrl-names = "default"; @@ -59,6 +86,43 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_connector: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&hdmi_phy { + status = "okay"; +}; + +&ledc { + pinctrl-0 = <&ledc_pc0_pin>; + pinctrl-names = "default"; + status = "okay"; + + multi-led@0 { + reg = <0x0>; + color = ; + function = LED_FUNCTION_STATUS; + }; +}; + +&lradc { + status = "okay"; + + button-220 { + label = "OK"; + linux,code = ; + channel = <0>; + voltage = <220000>; + }; +}; + &mmc1 { bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts @@ -68,6 +68,12 @@ status = "okay"; }; +&spi0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0_pb8_pins>; pinctrl-names = "default"; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts @@ -22,6 +22,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi_connector: connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out_connector>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -70,10 +81,28 @@ clock-frequency = <24000000>; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_connector: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&hdmi_phy { + status = "okay"; +}; + &mmc0 { bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts @@ -22,6 +22,7 @@ #include #include +#include /dts-v1/; @@ -36,12 +37,24 @@ ethernet0 = &emac; ethernet1 = &xr829; serial0 = &uart0; + spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; + hdmi_connector: connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out_connector>; + }; + }; + }; + reg_usbvbus: usbvbus { compatible = "regulator-fixed"; regulator-name = "usbvbus"; @@ -52,16 +65,13 @@ vin-supply = <®_vcc>; }; - /* - * This regulator is PWM-controlled, but the PWM controller is not - * yet supported, so fix the regulator to its default voltage. - */ reg_vdd_cpu: vdd-cpu { - compatible = "regulator-fixed"; + compatible = "pwm-regulator"; + pwms = <&pwm 0 50000 0>; + pwm-supply = <®_vcc>; regulator-name = "vdd-cpu"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <®_vcc>; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1160000>; }; wifi_pwrseq: wifi-pwrseq { @@ -70,6 +80,18 @@ }; }; +&codec { + routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "LINEINL", "HPOUTL", + "LINEINR", "HPOUTR", + "MICIN3", "Headset Microphone", + "Headset Microphone", "HBIAS"; + widgets = "Microphone", "Headset Microphone", + "Headphone", "Headphone Jack"; + status = "okay"; +}; + &cpu0 { cpu-supply = <®_vdd_cpu>; }; @@ -78,6 +100,10 @@ clock-frequency = <24000000>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -95,6 +121,20 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_connector: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&hdmi_phy { + status = "okay"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pb0_pins>; pinctrl-names = "default"; @@ -121,6 +161,29 @@ }; }; +&ledc { + pinctrl-0 = <&ledc_pc0_pin>; + pinctrl-names = "default"; + status = "okay"; + + multi-led@0 { + reg = <0x0>; + color = ; + function = LED_FUNCTION_STATUS; + }; +}; + +&lradc { + status = "okay"; + + button-160 { + label = "OK"; + linux,code = ; + channel = <0>; + voltage = <160000>; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -165,6 +228,55 @@ status = "okay"; }; +&pwm { + pinctrl-0 = <&pwm0_pd16_pin>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot0"; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "uboot"; + reg = <0x00100000 0x00300000>; + }; + + partition@400000 { + label = "secure_storage"; + reg = <0x00400000 0x00100000>; + }; + + partition@500000 { + label = "sys"; + reg = <0x00500000 0x0fb00000>; + }; + }; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pd_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0_pb8_pins>; pinctrl-names = "default"; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi @@ -4,8 +4,67 @@ #include "sun20i-d1s.dtsi" #include "sunxi-d1-t113.dtsi" +#include + / { + thermal-zones { + cpu-thermal { + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&ths>; + + trips { + cpu_target: cpu-target { + hysteresis = <3000>; + temperature = <85000>; + type = "passive"; + }; + + cpu-crit { + hysteresis = <0>; + temperature = <110000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { + ledc: led-controller@2008000 { + compatible = "allwinner,sun20i-d1-ledc", + "allwinner,sun50i-a100-ledc"; + reg = <0x2008000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_LEDC>; + dmas = <&dma 42>; + dma-names = "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ths: temperature-sensor@2009400 { + compatible = "allwinner,sun20i-d1-ths"; + reg = <0x2009400 0x400>; + interrupts = <74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>, <&dcxo>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calib>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + vref-supply = <®_aldo>; + }; + lradc: keys@2009800 { compatible = "allwinner,sun20i-d1-lradc", "allwinner,sun50i-r329-lradc"; @@ -13,9 +72,50 @@ interrupts = ; clocks = <&ccu CLK_BUS_LRADC>; resets = <&ccu RST_BUS_LRADC>; + vref-supply = <®_aldo>; status = "disabled"; }; + codec: audio-codec@2030000 { + compatible = "allwinner,sun20i-d1-codec", "simple-mfd", "syscon"; + reg = <0x2030000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_AUDIO>, + <&ccu CLK_AUDIO_ADC>, + <&ccu CLK_AUDIO_DAC>, + <&dcxo>, + <&rtc CLK_OSC32K>; + clock-names = "bus", "adc", "dac", "hosc", "losc"; + resets = <&ccu RST_BUS_AUDIO>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + avcc-supply = <®_aldo>; + hpvcc-supply = <®_hpldo>; + #address-cells = <1>; + #size-cells = <1>; + #sound-dai-cells = <0>; + + regulators@2030348 { + compatible = "allwinner,sun20i-d1-analog-ldos"; + reg = <0x2030348 0x4>; + nvmem-cells = <&bg_trim>; + nvmem-cell-names = "bg_trim"; + + reg_aldo: aldo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vdd33-supply = <®_vcc_3v3>; + }; + + reg_hpldo: hpldo { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + hpldoin-supply = <®_vcc_3v3>; + }; + }; + }; + i2s0: i2s@2032000 { compatible = "allwinner,sun20i-d1-i2s", "allwinner,sun50i-r329-i2s"; @@ -33,6 +133,10 @@ }; }; +&hdmi { + hvcc-supply = <®_ldoa>; +}; + &pio { /omit-if-no-ref/ dmic_pb11_d0_pin: dmic-pb11-d0-pin { @@ -59,8 +163,31 @@ }; /omit-if-no-ref/ + ledc_pc0_pin: ledc-pc0-pin { + pins = "PC0"; + function = "ledc"; + }; + + /omit-if-no-ref/ uart0_pb8_pins: uart0-pb8-pins { pins = "PB8", "PB9"; function = "uart0"; }; }; + +&syscon { + regulators@3000150 { + compatible = "allwinner,sun20i-d1-system-ldos"; + reg = <0x3000150 0x4>; + + reg_ldoa: ldoa { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + ldo-in-supply = <®_vcc_3v3>; + }; + + reg_ldob: ldob { + }; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi @@ -28,7 +28,7 @@ riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", "zifencei", "zihpm", "xtheadvector"; - thead,vlenb = <128>; + thead,vlenb = <16>; #cooling-cells = <2>; cpu0_intc: interrupt-controller { @@ -116,3 +116,14 @@ <0x00000000 0x0000000f 0xffffffff 0xffffffff 0x00020000>; }; }; + +&sid { + ths_calib: ths-calib@14 { + reg = <0x14 0x4>; + }; + + bg_trim: bg-trim@28 { + reg = <0x28 0x4>; + bits = <16 8>; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi @@ -11,5 +11,55 @@ clock-names = "hosc", "losc"; status = "reserved"; }; + + hdmi: hdmi@5500000 { + compatible = "allwinner,sun20i-d1-dw-hdmi"; + reg = <0x5500000 0x10000>; + reg-io-width = <1>; + interrupts = ; + clocks = <&ccu CLK_BUS_HDMI>, + <&ccu CLK_HDMI_24M>, + <&ccu CLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; + resets = <&ccu RST_BUS_HDMI_SUB>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: phy@5510000 { + compatible = "allwinner,sun20i-d1-hdmi-phy"; + reg = <0x5510000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_24M>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI_MAIN>; + reset-names = "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + }; +}; + +&tcon_top_hdmi_out { + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; }; }; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -106,6 +106,30 @@ }; /omit-if-no-ref/ + pwm0_pd16_pin: pwm0-pd16-pin { + pins = "PD16"; + function = "pwm0"; + }; + + /omit-if-no-ref/ + pwm2_pd18_pin: pwm2-pd18-pin { + pins = "PD18"; + function = "pwm2"; + }; + + /omit-if-no-ref/ + pwm4_pd20_pin: pwm4-pd20-pin { + pins = "PD20"; + function = "pwm4"; + }; + + /omit-if-no-ref/ + pwm7_pd22_pin: pwm7-pd22-pin { + pins = "PD22"; + function = "pwm7"; + }; + + /omit-if-no-ref/ rgmii_pe_pins: rgmii-pe-pins { pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", @@ -122,11 +146,23 @@ /omit-if-no-ref/ spi0_pins: spi0-pins { - pins = "PC2", "PC3", "PC4", "PC5"; + pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7"; function = "spi0"; }; /omit-if-no-ref/ + spi1_pb_pins: spi1-pb-pins { + pins = "PB0", "PB8", "PB9", "PB10", "PB11", "PB12"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_pd_pins: spi1-pd-pins { + pins = "PD10", "PD11", "PD12", "PD13", "PD14", "PD15"; + function = "spi1"; + }; + + /omit-if-no-ref/ uart1_pg6_pins: uart1-pg6-pins { pins = "PG6", "PG7"; function = "uart1"; @@ -145,6 +181,18 @@ }; }; + pwm: pwm@2000c00 { + compatible = "allwinner,sun20i-d1-pwm"; + reg = <0x02000c00 0x400>; + clocks = <&ccu CLK_BUS_PWM>, + <&dcxo>, + <&ccu CLK_APB0>; + clock-names = "bus", "hosc", "apb"; + resets = <&ccu RST_BUS_PWM>; + status = "disabled"; + #pwm-cells = <0x3>; + }; + ccu: clock-controller@2001000 { compatible = "allwinner,sun20i-d1-ccu"; reg = <0x2001000 0x1000>; @@ -828,6 +876,8 @@ resets = <&ccu RST_BUS_TCON_LCD0>, <&ccu RST_BUS_LVDS0>; reset-names = "lcd", "lvds"; + phys = <&dphy>; + phy-names = "lvds0"; #clock-cells = <0>; ports { --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/Makefile +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/Makefile @@ -1,7 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb -dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb -dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb -dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb -dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb -dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-tysom-m.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-beaglev-fire.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-disco-kit.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-icicle-kit.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-icicle-kit-prod.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-m100pfsevp.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-polarberry.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-sev-kit.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += mpfs-tysom-m.dtb +dtb-$(CONFIG_ARCH_MICROCHIP) += pic64gx-curiosity-kit.dtb --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts @@ -88,7 +88,7 @@ <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>, <53>; - ngpios=<32>; + ngpios = <32>; gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2", "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5", "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8", --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2025 Microchip Technology Inc */ + +/ { + core_pwm0: pwm@40000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x40000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <3>; + clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>; + status = "disabled"; + }; + + i2c2: i2c@40000200 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x40000200 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + ihc: mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + status = "disabled"; + }; + + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + reg = <0x0 0x50000000 0x0 0x1c000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + status = "disabled"; + }; + + refclk_ccc: clock-cccref { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; +}; + +&ccc_sw { + clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, + <&refclk_ccc>, <&refclk_ccc>; + clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1", + "dll0_ref", "dll1_ref"; + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2025 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-disco-kit-fabric.dtsi" +#include +#include + +/ { + model = "Microchip PolarFire-SoC Discovery Kit"; + compatible = "microchip,mpfs-disco-kit-reference-rtl-v2507", + "microchip,mpfs-disco-kit", + "microchip,mpfs"; + + aliases { + ethernet0 = &mac0; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + color = ; + label = "led1"; + }; + + led-2 { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + color = ; + label = "led2"; + }; + + led-3 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + color = ; + label = "led3"; + }; + + led-4 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + color = ; + label = "led4"; + }; + + led-5 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + color = ; + label = "led5"; + }; + + led-6 { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + color = ; + label = "led6"; + }; + + led-7 { + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + color = ; + label = "led7"; + }; + + led-8 { + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + color = ; + label = "led8"; + }; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio1 { + interrupts = <27>, <28>, <29>, <30>, + <31>, <32>, <33>, <47>, + <35>, <36>, <37>, <38>, + <39>, <40>, <41>, <42>, + <43>, <44>, <45>, <46>, + <47>, <48>, <49>, <50>; + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&ihc { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@b { + reg = <0xb>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-1-8-v; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2025 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" +#include +#include + +/ { + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + color = ; + label = "led1"; + }; + + led-2 { + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + color = ; + label = "led2"; + }; + + led-3 { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + color = ; + label = "led3"; + }; + + led-4 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + color = ; + label = "led4"; + }; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + ddrc_cache_hi: memory@1040000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDREG"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA25"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD25"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA_REG"; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&ihc { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +/* UBUNTU: PCIe support is not yet ready, so disable it for now +&pcie { + status = "okay"; +}; +*/ + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&syscontroller_qspi { + /* + * The flash *is* there, but Icicle kits that have engineering sample + * silicon (write?) access to this flash to non-functional. The system + * controller itself can actually access it, but the MSS cannot write + * an image there. Instantiating a coreQSPI in the fabric & connecting + * it to the flash instead should work though. Pre-production or later + * silicon does not have this issue. + */ + status = "disabled"; + + sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <1>; + reg = <0>; + }; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -2,9 +2,6 @@ /* Copyright (c) 2020-2021 Microchip Technology Inc */ / { - compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", - "microchip,mpfs"; - core_pwm0: pwm@40000000 { compatible = "microchip,corepwm-rtl-v4"; reg = <0x0 0x40000000 0x0 0xF0>; @@ -26,6 +23,26 @@ status = "disabled"; }; + ihc: mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + status = "disabled"; + }; + + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + reg = <0x0 0x50000000 0x0 0x1c000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>, <177>; + interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4"; + #mbox-cells = <1>; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + status = "disabled"; + }; + pcie: pcie@3000000000 { compatible = "microchip,pcie-host-1.0"; #address-cells = <0x3>; @@ -57,7 +74,7 @@ }; }; - refclk_ccc: cccrefclk { + refclk_ccc: clock-cccref { compatible = "fixed-clock"; #clock-cells = <0>; }; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2025 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs-icicle-kit-common.dtsi" + +/ { + model = "Microchip PolarFire-SoC Icicle Kit (Production Silicon)"; + compatible = "microchip,mpfs-icicle-prod-reference-rtl-v2507", + "microchip,mpfs-icicle-kit-prod", + "microchip,mpfs-icicle-kit", + "microchip,mpfs-prod", + "microchip,mpfs"; +}; + +&syscontroller { + microchip,bitstream-flash = <&sys_ctrl_flash>; +}; + +&syscontroller_qspi { + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -3,249 +3,11 @@ /dts-v1/; -#include "mpfs.dtsi" -#include "mpfs-icicle-kit-fabric.dtsi" -#include -#include +#include "mpfs-icicle-kit-common.dtsi" / { model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + compatible = "microchip,mpfs-icicle-es-reference-rtl-v2507", + "microchip,mpfs-icicle-kit", "microchip,mpfs"; - - aliases { - ethernet0 = &mac1; - serial0 = &mmuart0; - serial1 = &mmuart1; - serial2 = &mmuart2; - serial3 = &mmuart3; - serial4 = &mmuart4; - }; - - chosen { - stdout-path = "serial1:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-1 { - gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; - color = ; - label = "led1"; - }; - - led-2 { - gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; - color = ; - label = "led2"; - }; - - led-3 { - gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; - color = ; - label = "led3"; - }; - - led-4 { - gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; - color = ; - label = "led4"; - }; - }; - - ddrc_cache_lo: memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000>; - status = "okay"; - }; - - ddrc_cache_hi: memory@1040000000 { - device_type = "memory"; - reg = <0x10 0x40000000 0x0 0x40000000>; - status = "okay"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hss_payload: region@BFC00000 { - reg = <0x0 0xBFC00000 0x0 0x400000>; - no-map; - }; - }; -}; - -&core_pwm0 { - status = "okay"; -}; - -&gpio2 { - interrupts = <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - power-monitor@10 { - compatible = "microchip,pac1934"; - reg = <0x10>; - - #address-cells = <1>; - #size-cells = <0>; - - channel@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <10000>; - label = "VDDREG"; - }; - - channel@2 { - reg = <0x2>; - shunt-resistor-micro-ohms = <10000>; - label = "VDDA25"; - }; - - channel@3 { - reg = <0x3>; - shunt-resistor-micro-ohms = <10000>; - label = "VDD25"; - }; - - channel@4 { - reg = <0x4>; - shunt-resistor-micro-ohms = <10000>; - label = "VDDA_REG"; - }; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&mac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; - status = "okay"; -}; - -&mac1 { - phy-mode = "sgmii"; - phy-handle = <&phy1>; - status = "okay"; - - phy1: ethernet-phy@9 { - reg = <9>; - }; - - phy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -&mbox { - status = "okay"; -}; - -&mmc { - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&mmuart1 { - status = "okay"; -}; - -&mmuart2 { - status = "okay"; -}; - -&mmuart3 { - status = "okay"; -}; - -&mmuart4 { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&qspi { - status = "okay"; -}; - -&refclk { - clock-frequency = <125000000>; -}; - -&refclk_ccc { - clock-frequency = <50000000>; -}; - -&rtc { - status = "okay"; -}; - -&spi0 { - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&syscontroller { - status = "okay"; -}; - -&syscontroller_qspi { - /* - * The flash *is* there, but Icicle kits that have engineering sample - * silicon (write?) access to this flash to non-functional. The system - * controller itself can actually access it, but the MSS cannot write - * an image there. Instantiating a coreQSPI in the fabric & connecting - * it to the flash instead should work though. Pre-production or later - * silicon does not have this issue. - */ - status = "disabled"; - - sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <20000000>; - spi-rx-bus-width = <1>; - reg = <0>; - }; -}; - -&usb { - status = "okay"; - dr_mode = "host"; }; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/pic64gx-curiosity-kit.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/pic64gx-curiosity-kit.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for the PIC64GX Curiosity Kit + * + * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Pierre-Henry Moussay + * + * The Curiosity-GX10000 (PIC64GX SoC Curiosity Kit) is a compact SoC + * prototyping board featuring a Microchip PIC64GX SoC + * PIC64GX-1000. Features include: + * - 1 GB DDR4 SDRAM + * - Gigabit Ethernet + * - microSD-card slot + * + * https://www.microchip.com/en-us/development-tool/curiosity-pic64gx1000-kit-es + */ + +/dts-v1/; + +#include "pic64gx.dtsi" +#include "pic64gx-pinctrl.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PIC64GX Curiosity Kit"; + compatible = "microchip,pic64gx-curiosity-kit", "microchip,pic64gx"; + + aliases { + ethernet0 = &mac0; + serial1 = &mmuart1; + serial2 = &mmuart2; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss: hss-buffer@bfc00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&gpio0 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>; + status ="okay"; + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "MIPI_CAM_RESET", "MIPI_CAM_STANDBY"; +}; + +&gpio1 { + interrupts = <27>, <28>, <29>, <30>, + <31>, <32>, <33>, <34>, + <35>, <36>, <37>, <38>, + <39>, <40>, <41>, <42>, + <43>, <44>, <45>, <46>, + <47>, <48>, <49>, <50>; + status ="okay"; + gpio-line-names = + "", "", "LED1", "LED2", "LED3", "LED4", "LED5", "LED6", + "LED7", "LED8", "", "", "", "", "", "", + "", "", "", "", "HDMI_HPD", "", "", "GPIO_1_23"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + pinctrl-names = "default"; + pinctrl-0 = <&mdio1_gpio>, <&spi0_gpio>, <&can0_gpio>, <&pcie_gpio>, + <&qspi_gpio>, <&uart3_gpio>, <&uart4_gpio>, <&can1_gpio>; + status ="okay"; + gpio-line-names = + "", "", "", "", "", "", "SWITCH2", "USR_IO12", + "DIP1", "DIP2", "", "DIP3", "USR_IO1", "USR_IO2", "USR_IO7", "USR_IO8", + "USR_IO3", "USR_IO4", "USR_IO5", "USR_IO6", "", "", "USR_IO9", "USR_IO10", + "DIP4", "USR_IO11", "", "", "SWITCH1", "", "", ""; +}; + +&mac0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_default>; + + phy0: ethernet-phy@b { + reg = <0xb>; + }; +}; + +&mbox { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + sdhci-caps-mask = <0x00000007 0x00000000>; + status = "okay"; +}; + +&mmuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_fio>; + status = "okay"; +}; + +&mmuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_default>; + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/pic64gx-pinctrl.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/pic64gx-pinctrl.dtsi @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +&iomux0 { + spi0_fio: mux-spi0-fabric { + function = "spi0"; + groups = "spi0_fabric"; + }; + + spi1_mssio: mux-spi1-mssio { + function = "spi1"; + groups = "spi1_mssio"; + }; + + i2c0_mssio: mux-i2c0-mssio { + function = "i2c0"; + groups = "i2c0_mssio"; + }; + + i2c1_mssio: mux-i2c1-mssio { + function = "i2c1"; + groups = "i2c1_mssio"; + }; + + can0_fio: mux-can0-fabric { + function = "can0"; + groups = "can0_fabric"; + }; + + can1_fio: mux-can1-fabric { + function = "can1"; + groups = "can1_fabric"; + }; + + qspi_fio: mux-qspi-fabric { + function = "qspi"; + groups = "qspi_fabric"; + }; + + uart0_mssio: mux-uart0-mssio { + function = "uart0"; + groups = "uart0_mssio"; + }; + + uart1_fio: mux-uart1-fabric { + function = "uart1"; + groups = "uart1_fabric"; + }; + + uart2_fio: mux-uart2-fabric { + function = "uart2"; + groups = "uart2_fabric"; + }; + + uart3_fio: mux-uart3-fabric { + function = "uart3"; + groups = "uart3_fabric"; + }; + + uart4_fio: mux-uart4-fabric { + function = "uart4"; + groups = "uart4_fabric"; + }; + + mdio0_fio: mux-mdio0-fabric { + function = "mdio0"; + groups = "mdio0_fabric"; + }; + + mdio1_fio: mux-mdio1-fabric { + function = "mdio1"; + groups = "mdio1_fabric"; + }; +}; + +&gpio2_pinctrl { + //TODO rethink the labels, since a bunch of these are not defaults or + //just outright remove the non-default groups + mdio0_default: mux-mac0 { + function = "mdio0"; + groups = "mdio0"; + }; + + mdio0_gpio: mux-mac0-gpio2 { + function = "gpio"; + groups = "gpio_mdio0"; + }; + + mdio1_default: mux-mac1 { + function = "mdio1"; + groups = "mdio1"; + }; + + mdio1_gpio: mux-mac1-gpio2 { + function = "gpio"; + groups = "gpio_mdio1"; + }; + + spi0_default: mux-spi0 { + function = "spi0"; + groups = "spi0"; + }; + + spi0_gpio: mux-spi0-gpio2 { + function = "gpio"; + groups = "gpio_spi0"; + }; + + can0_default: mux-can0 { + function = "can0"; + groups = "can0"; + }; + + can0_gpio: mux-can0-gpio2 { + function = "gpio"; + groups = "gpio_can0"; + }; + + pcie_default: mux-pcie { + function = "pcie"; + groups = "pcie"; + }; + + pcie_gpio: mux-pcie-gpio2 { + function = "gpio"; + groups = "gpio_pcie"; + }; + + qspi_default: mux-qspi { + function = "qspi"; + groups = "qspi"; + }; + + qspi_gpio: mux-qspi-gpio2 { + function = "gpio"; + groups = "gpio_qspi"; + }; + + uart3_default: mux-uart3 { + function = "uart3"; + groups = "uart3"; + }; + + uart3_gpio: mux-uart3-gpio2 { + function = "gpio"; + groups = "gpio_uart3"; + }; + + uart4_default: mux-uart4 { + function = "uart4"; + groups = "uart4"; + }; + + uart4_gpio: mux-uart4-gpio2 { + function = "gpio"; + groups = "gpio_uart4"; + }; + + can1_default: mux-can1 { + function = "can1"; + groups = "can1"; + }; + + can1_gpio: mux-can1-gpio2 { + function = "gpio"; + groups = "gpio_can1"; + }; + + uart2_default: mux-uart2 { + function = "uart2"; + groups = "uart2"; + }; + + uart2_gpio: mux-uart2-gpio2 { + function = "gpio"; + groups = "gpio_uart2"; + }; +}; + --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/microchip/pic64gx.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/microchip/pic64gx.dtsi @@ -0,0 +1,630 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for the PIC64GX SoCs + * + * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Pierre-Henry Moussay + * + * PIC64GX is a series RISC-V multicore SoCs: + * https://www.microchip.com/en-us/products/microprocessors/64-bit-mpus/pic64gx + */ + +/dts-v1/; +#include "dt-bindings/clock/microchip,mpfs-clock.h" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PIC64GX SoC"; + compatible = "microchip,pic64gx"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "sifive,e51", "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "c", "zicntr", "zicsr", + "zifencei", "zihpm"; + clocks = <&clkcfg CLK_CPU>; + status = "disabled"; + + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu1: cpu@1 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", + "zicsr", "zifencei", "zihpm"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu2: cpu@2 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <2>; + riscv,isa = "rv64imafdc"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", + "zicsr", "zifencei", "zihpm"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu3: cpu@3 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <3>; + riscv,isa = "rv64imafdc"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", + "zicsr", "zifencei", "zihpm"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu4: cpu@4 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <4>; + riscv,isa = "rv64imafdc"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", + "zicsr", "zifencei", "zihpm"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + next-level-cache = <&cctrllr>; + status = "okay"; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; + }; + + scbclk: clock-80000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <80000000>; + }; + + refclk: mssrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + axiclk: axi-aclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + videoclk: video-aclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + syscontroller: syscontroller { + compatible = "microchip,pic64gx-sys-controller"; + mboxes = <&mbox 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + clint: clint@2000000 { + compatible = "microchip,pic64gx-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = <&cpu0_intc 0xffffffff>, <&cpu0_intc 0xffffffff>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + cctrllr: cache-controller@2010000 { + compatible = "microchip,pic64gx-ccache", "microchip,mpfs-ccache", + "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + interrupt-parent = <&plic>; + interrupts = <1>, <3>, <4>, <2>; + }; + + pdma: dma-controller@3000000 { + compatible = "microchip,pic64gx-pdma", "microchip,mpfs-pdma", + "sifive,pdma0"; + reg = <0x0 0x3000000 0x0 0x8000>; + interrupt-parent = <&plic>; + interrupts = <5 6>, <7 8>, <9 10>, <11 12>; + #dma-cells = <1>; + }; + + plic: interrupt-controller@c000000 { + compatible = "microchip,pic64gx-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 0xffffffff>, + <&cpu1_intc 0xffffffff>, <&cpu1_intc 9>, + <&cpu2_intc 0xffffffff>, <&cpu2_intc 9>, + <&cpu3_intc 0xffffffff>, <&cpu3_intc 9>, + <&cpu4_intc 0xffffffff>, <&cpu4_intc 9>; + riscv,ndev = <186>; + }; + + mmuart0: serial@20000000 { + compatible = "ns16550a"; + reg = <0x0 0x20000000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <90>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART0>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_mssio>; + status = "disabled"; /* Reserved for the HSS */ + }; + + mss_top_sysreg: syscon@20002000 { + compatible = "microchip,pic64gx-mss-top-sysreg", + "microchip,mpfs-mss-top-sysreg", + "syscon", "simple-mfd"; + reg = <0x0 0x20002000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #reset-cells = <1>; + + iomux0: pinctrl@200 { + compatible = "microchip,pic64gx-pinctrl-iomux0", + "microchip,mpfs-pinctrl-iomux0"; + reg = <0x200 0x4>; + pinctrl-use-default; + }; + + mssio: pinctrl@204 { + compatible = "microchip,pic64gx-pinctrl-mssio", + "microchip,mpfs-pinctrl-mssio"; + reg = <0x204 0x7c>; + /* on icicle ref design at least */ + pinctrl-use-default; + }; + }; + + sysreg_scb: syscon@20003000 { + compatible = "microchip,pic64gx-sysreg-scb", + "microchip,mpfs-sysreg-scb", + "syscon"; + reg = <0x0 0x20003000 0x0 0x1000>; + }; + + /* Common node entry for emmc/sd */ + mmc: mmc@20008000 { + compatible = "microchip,pic64gx-sd4hc", "cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <88>; + clocks = <&clkcfg CLK_MMC>; + max-frequency = <200000000>; + status = "disabled"; + }; + + mmuart1: serial@20100000 { + compatible = "ns16550a"; + reg = <0x0 0x20100000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <91>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART1>; + status = "disabled"; + }; + + mmuart2: serial@20102000 { + compatible = "ns16550a"; + reg = <0x0 0x20102000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <92>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART2>; + status = "disabled"; + }; + + mmuart3: serial@20104000 { + compatible = "ns16550a"; + reg = <0x0 0x20104000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <93>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART3>; + status = "disabled"; + }; + + mmuart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <94>; + clocks = <&clkcfg CLK_MMUART4>; + current-speed = <115200>; + status = "disabled"; + }; + + spi0: spi@20108000 { + compatible = "microchip,pic64gx-spi", "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <54>; + clocks = <&clkcfg CLK_SPI0>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,pic64gx-spi", "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20109000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <55>; + clocks = <&clkcfg CLK_SPI1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_mssio>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,pic64gx-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010a000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clkcfg CLK_I2C0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_mssio>; + status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,pic64gx-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <61>; + clocks = <&clkcfg CLK_I2C1>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_mssio>; + status = "disabled"; + }; + + can0: can@2010c000 { + compatible = "microchip,pic64gx-can", "microchip,mpfs-can"; + reg = <0x0 0x2010c000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>; + interrupt-parent = <&plic>; + interrupts = <56>; + resets = <&mss_top_sysreg CLK_CAN0>; + status = "disabled"; + }; + + can1: can@2010d000 { + compatible = "microchip,pic64gx-can", "microchip,mpfs-can"; + reg = <0x0 0x2010d000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>; + interrupt-parent = <&plic>; + interrupts = <57>; + resets = <&mss_top_sysreg CLK_CAN1>; + status = "disabled"; + }; + + mac0: ethernet@20110000 { + compatible = "microchip,pic64gx-macb", "microchip,mpfs-macb", + "cdns,macb"; + reg = <0x0 0x20110000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <64>, <65>, <66>, <67>, <68>, <69>; + /* Filled in by a bootloader */ + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + resets = <&mss_top_sysreg CLK_MAC0>; + status = "disabled"; + }; + + mac1: ethernet@20112000 { + compatible = "microchip,pic64gx-macb", "microchip,mpfs-macb", + "cdns,macb"; + reg = <0x0 0x20112000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <70>, <71>, <72>, <73>, <74>, <75>; + /* Filled in by a bootloader */ + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + resets = <&mss_top_sysreg CLK_MAC1>; + status = "disabled"; + }; + + gpio0: gpio@20120000 { + compatible = "microchip,pic64gx-gpio", "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <14>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,pic64gx-gpio", "microchip,mpfs-gpio"; + reg = <0x0 0x20121000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,pic64gx-gpio", "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,pic64gx-rtc", "microchip,mpfs-rtc"; + reg = <0x0 0x20124000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <80>, <81>; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; + status = "disabled"; + }; + + usb: usb@20201000 { + compatible = "microchip,pic64gx-musb", "microchip,mpfs-musb"; + reg = <0x0 0x20201000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <86>, <87>; + clocks = <&clkcfg CLK_USB>; + interrupt-names = "dma", "mc"; + status = "disabled"; + }; + + qspi: spi@21000000 { + compatible = "microchip,pic64gx-qspi", "microchip,coreqspi-rtl-v2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <85>; + clocks = <&clkcfg CLK_QSPI>; + status = "disabled"; + }; + + control_scb: syscon@37020000 { + compatible = "microchip,pic64gx-control-scb", + "microchip,mpfs-control-scb", + "syscon"; + reg = <0x0 0x37020000 0x0 0x100>; + }; + + syscontroller_qspi: spi@37020100 { + compatible = "microchip,pic64gx-qspi", "microchip,coreqspi-rtl-v2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x37020100 0x0 0x100>; + interrupt-parent = <&plic>; + interrupts = <110>; + clocks = <&scbclk>; + status = "disabled"; + }; + + mbox: mailbox@37020800 { + compatible = "microchip,pic64gx-mailbox", "microchip,mpfs-mailbox"; + reg = <0x0 0x37020800 0x0 0x100>; + interrupt-parent = <&plic>; + interrupts = <96>; + #mbox-cells = <1>; + status = "disabled"; + }; + + ccc_se: clock-controller@38010000 { + compatible = "microchip,pic64gx-ccc", "microchip,mpfs-ccc"; + reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>, + <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + ccc_ne: clock-controller@38040000 { + compatible = "microchip,pic64gx-ccc", "microchip,mpfs-ccc"; + reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>, + <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + ccc_nw: clock-controller@38100000 { + compatible = "microchip,pic64gx-ccc", "microchip,mpfs-ccc"; + reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>, + <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + ccc_sw: clock-controller@38400000 { + compatible = "microchip,pic64gx-ccc", "microchip,mpfs-ccc"; + reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>, + <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>; + #clock-cells = <1>; + status = "disabled"; + }; + + clkcfg: clkcfg@3e001000 { + compatible = "microchip,pic64gx-clkcfg", "microchip,mpfs-clkcfg"; + reg = <0x0 0x3e001000 0x0 0x1000>; + clocks = <&refclk>; + #clock-cells = <1>; + }; + + gpio2_pinctrl: pinctrl@41000000 { + compatible = "microchip,pic64gx-pinctrl-gpio2"; + reg = <0x0 0x41000000 0x0 0x4>; + pinctrl-use-default; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_fio>, <&mdio1_fio>, <&spi0_fio>, <&qspi_fio>, + <&uart3_fio>, <&uart4_fio>, <&can1_fio>, <&can0_fio>, + <&uart2_fio>; + }; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/sifive/fu740-c000.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/sifive/fu740-c000.dtsi @@ -42,7 +42,7 @@ }; }; cpu1: cpu@1 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; @@ -69,7 +69,7 @@ }; }; cpu2: cpu@2 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; @@ -96,7 +96,7 @@ }; }; cpu3: cpu@3 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; @@ -123,7 +123,7 @@ }; }; cpu4: cpu@4 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-microsemi.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-microsemi.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "hifive-unleashed-a00.dts" + +/ { + soc { + pcie: pcie@2030000000 { + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + compatible = "microsemi,ms-pf-axi-pcie-host"; + device_type = "pci"; + bus-range = <0x01 0x7f>; + interrupt-map = <0 0 0 1 &ms_pcie_intc 0 0 0 0 2 &ms_pcie_intc 1 0 0 0 3 &ms_pcie_intc 2 0 0 0 4 &ms_pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + interrupt-parent = <&plic0>; + interrupts = <32>; + ranges = <0x3000000 0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>; + reg = <0x20 0x30000000 0x0 0x4000000 0x20 0x0 0x0 0x100000>; + reg-names = "control", "apb"; + ms_pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/Makefile +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/Makefile @@ -10,6 +10,11 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-deepcomputing-fml13v01.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-orangepi-rv.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite-emmc.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -281,15 +281,8 @@ assigned-clock-rates = <50000000>; bus-width = <8>; bootph-pre-ram; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_vdd>; status = "okay"; }; @@ -299,12 +292,7 @@ assigned-clock-rates = <50000000>; bus-width = <4>; bootph-pre-ram; - no-sdio; - no-mmc; - cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; - disable-wp; cap-sd-highspeed; - post-power-on-delay-ms = <200>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; status = "okay"; @@ -448,17 +436,6 @@ }; mmc0_pins: mmc0-0 { - rst-pins { - pinmux = ; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - mmc-pins { pinmux = , , --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts @@ -11,6 +11,33 @@ compatible = "deepcomputing,fml13v01", "starfive,jh7110"; }; +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; + +&mmc0_pins { + rst-pins { + pinmux = ; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + &pcie1 { perst-gpios = <&sysgpio 21 GPIO_ACTIVE_LOW>; phys = <&pciephy1>; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -22,6 +22,33 @@ status = "okay"; }; +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; + +&mmc0_pins { + rst-pins { + pinmux = ; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + &pcie0 { status = "okay"; }; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 E Shattow + */ + +/dts-v1/; +#include "jh7110-milkv-marscm.dtsi" + +/ { + model = "Milk-V Mars CM"; + compatible = "milkv,marscm-emmc", "starfive,jh7110"; +}; + +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 E Shattow + */ + +/dts-v1/; +#include "jh7110-milkv-marscm.dtsi" + +/ { + model = "Milk-V Mars CM Lite"; + compatible = "milkv,marscm-lite", "starfive,jh7110"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + +&mmc0_pins { + pwren-pins { + pinmux = ; + }; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 E Shattow + */ + +/dts-v1/; +#include +#include "jh7110-common.dtsi" + +/ { + aliases { + i2c1 = &i2c1; + i2c3 = &i2c3; + i2c4 = &i2c4; + serial3 = &uart3; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&sysgpio 33 GPIO_ACTIVE_LOW>; + }; +}; + +&gmac0 { + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + starfive,tx-use-rgmii-clk; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c6 { + status = "disabled"; +}; + +&mmc0_pins { + rst-pins { + pinmux = ; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + #address-cells = <1>; + #size-cells = <0>; + + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + status = "okay"; + + ap6256: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&sysgpio>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-0 = <&wifi_host_wake_irq>; + pinctrl-names = "default"; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&phy0 { + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,tx-clk-adj-enabled; +}; + +&pwm { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&sysgpio { + uart1_pins: uart1-0 { + tx-pins { + pinmux = ; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + }; + + rx-pins { + pinmux = ; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + + cts-pins { + pinmux = ; + bias-disable; + input-enable; + input-schmitt-enable; + }; + + rts-pins { + pinmux = ; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + + usb0_pins: usb0-0 { + vbus-pins { + pinmux = ; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + wifi_host_wake_irq: wifi-host-wake-irq-0 { + wake-pins { + pinmux = ; + input-enable; + }; + }; +}; + +&uart1 { + uart-has-rtscts; + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 Icenowy Zheng + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Xunlong Orange Pi RV"; + compatible = "xunlong,orangepi-rv", "starfive,jh7110"; + + /* This regulator is always on by hardware */ + reg_vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3-pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&sysgpio 62 GPIO_ACTIVE_LOW>; + }; +}; + +&gmac0 { + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + starfive,tx-use-rgmii-clk; + status = "okay"; +}; + +&mmc0 { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <®_vcc3v3_pcie>; + vqmmc-supply = <&vcc_3v3>; + status = "okay"; + + ap6256: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + /* TODO: out-of-band IRQ on GPIO21, lacking pinctrl support */ + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&phy0 { + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; +}; + +&pwmdac { + status = "okay"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts @@ -44,6 +44,33 @@ status = "okay"; }; +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; + +&mmc0_pins { + rst-pins { + pinmux = ; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + &pcie1 { status = "okay"; }; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite-emmc.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite-emmc.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 StarFive Technology Co., Ltd. + * Copyright (C) 2025 Hal Feng + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2-lite.dtsi" + +/ { + model = "StarFive VisionFive 2 Lite eMMC"; + compatible = "starfive,visionfive-2-lite-emmc", "starfive,jh7110s"; +}; + +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 StarFive Technology Co., Ltd. + * Copyright (C) 2025 Hal Feng + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2-lite.dtsi" + +/ { + model = "StarFive VisionFive 2 Lite"; + compatible = "starfive,visionfive-2-lite", "starfive,jh7110s"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>; + disable-wp; + cap-sd-highspeed; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 StarFive Technology Co., Ltd. + * Copyright (C) 2025 Hal Feng + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + vcc_3v3_pcie: regulator-vcc-3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&sysgpio 27 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc_3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu_opp { + /delete-node/ opp-375000000; + /delete-node/ opp-500000000; + /delete-node/ opp-750000000; + /delete-node/ opp-1500000000; + + opp-312500000 { + opp-hz = /bits/ 64 <312500000>; + opp-microvolt = <800000>; + }; + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + opp-microvolt = <800000>; + }; + opp-625000000 { + opp-hz = /bits/ 64 <625000000>; + opp-microvolt = <800000>; + }; + opp-1250000000 { + opp-hz = /bits/ 64 <1250000000>; + opp-microvolt = <1000000>; + }; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&mmc1 { + max-frequency = <50000000>; + keep-power-in-suspend; + non-removable; +}; + +&pcie1 { + vpcie3v3-supply = <&vcc_3v3_pcie>; + status = "okay"; +}; + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +}; + +&pwm { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&syscrg { + assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1250000000>; +}; + +&sysgpio { + uart1_pins: uart1-0 { + tx-pins { + pinmux = ; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = ; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + + cts-pins { + pinmux = ; + input-enable; + }; + + rts-pins { + pinmux = ; + input-enable; + }; + }; + + usb0_pins: usb0-0 { + power-pins { + pinmux = ; + input-disable; + }; + + switch-pins { + pinmux = ; + input-disable; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; + +&usb_cdns3 { + phys = <&usbphy0>, <&pciephy0>; + phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy"; +}; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -38,9 +38,33 @@ }; &mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; non-removable; }; +&mmc0_pins { + rst-pins { + pinmux = ; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + &pcie0 { status = "okay"; }; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ linux-riscv-6.17-6.17.0/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -35,6 +35,7 @@ cpu0_intc: interrupt-controller { compatible = "riscv,cpu-intc"; + bootph-pre-ram; interrupt-controller; #interrupt-cells = <1>; }; @@ -68,6 +69,7 @@ cpu1_intc: interrupt-controller { compatible = "riscv,cpu-intc"; + bootph-pre-ram; interrupt-controller; #interrupt-cells = <1>; }; @@ -101,6 +103,7 @@ cpu2_intc: interrupt-controller { compatible = "riscv,cpu-intc"; + bootph-pre-ram; interrupt-controller; #interrupt-cells = <1>; }; @@ -134,6 +137,7 @@ cpu3_intc: interrupt-controller { compatible = "riscv,cpu-intc"; + bootph-pre-ram; interrupt-controller; #interrupt-cells = <1>; }; @@ -167,6 +171,7 @@ cpu4_intc: interrupt-controller { compatible = "riscv,cpu-intc"; + bootph-pre-ram; interrupt-controller; #interrupt-cells = <1>; }; @@ -273,12 +278,14 @@ gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { compatible = "fixed-clock"; + bootph-pre-ram; clock-output-names = "gmac1_rgmii_rxin"; #clock-cells = <0>; }; gmac1_rmii_refin: gmac1-rmii-refin-clock { compatible = "fixed-clock"; + bootph-pre-ram; clock-output-names = "gmac1_rmii_refin"; #clock-cells = <0>; }; @@ -321,6 +328,7 @@ osc: oscillator { compatible = "fixed-clock"; + bootph-pre-ram; clock-output-names = "osc"; #clock-cells = <0>; }; @@ -354,6 +362,7 @@ clint: timer@2000000 { compatible = "starfive,jh7110-clint", "sifive,clint0"; reg = <0x0 0x2000000 0x0 0x10000>; + bootph-pre-ram; interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, <&cpu1_intc 3>, <&cpu1_intc 7>, <&cpu2_intc 3>, <&cpu2_intc 7>, @@ -880,6 +889,7 @@ syscrg: clock-controller@13020000 { compatible = "starfive,jh7110-syscrg"; reg = <0x0 0x13020000 0x0 0x10000>; + bootph-pre-ram; clocks = <&osc>, <&gmac1_rmii_refin>, <&gmac1_rgmii_rxin>, <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, @@ -904,6 +914,7 @@ pllclk: clock-controller { compatible = "starfive,jh7110-pll"; + bootph-pre-ram; clocks = <&osc>; #clock-cells = <1>; }; @@ -931,6 +942,19 @@ <&syscrg JH7110_SYSRST_WDT_CORE>; }; + memory-controller@15700000 { + compatible = "starfive,jh7110-dmc"; + reg = <0x0 0x15700000 0x0 0x10000>, + <0x0 0x13000000 0x0 0x10000>; + bootph-pre-ram; + clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>; + clock-names = "pll"; + resets = <&syscrg JH7110_SYSRST_DDR_AXI>, + <&syscrg JH7110_SYSRST_DDR_OSC>, + <&syscrg JH7110_SYSRST_DDR_APB>; + reset-names = "axi", "osc", "apb"; + }; + crypto: crypto@16000000 { compatible = "starfive,jh7110-crypto"; reg = <0x0 0x16000000 0x0 0x4000>; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/include/asm/hwprobe.h +++ linux-riscv-6.17-6.17.0/arch/riscv/include/asm/hwprobe.h @@ -41,4 +41,11 @@ return pair->value == other_pair->value; } +#ifdef CONFIG_MMU +void riscv_hwprobe_register_async_probe(void); +void riscv_hwprobe_complete_async_probe(void); +#else +static inline void riscv_hwprobe_register_async_probe(void) {} +static inline void riscv_hwprobe_complete_async_probe(void) {} +#endif #endif --- linux-riscv-6.17-6.17.0.orig/arch/riscv/include/asm/pgtable.h +++ linux-riscv-6.17-6.17.0/arch/riscv/include/asm/pgtable.h @@ -653,6 +653,8 @@ return __pgprot(prot); } +#define pgprot_dmacoherent pgprot_writecombine + /* * Both Svade and Svadu control the hardware behavior when the PTE A/D bits need to be set. By * default the M-mode firmware enables the hardware updating scheme when only Svadu is present in --- linux-riscv-6.17-6.17.0.orig/arch/riscv/include/asm/vdso/arch_data.h +++ linux-riscv-6.17-6.17.0/arch/riscv/include/asm/vdso/arch_data.h @@ -12,6 +12,12 @@ /* Boolean indicating all CPUs have the same static hwprobe values. */ __u8 homogeneous_cpus; + + /* + * A gate to check and see if the hwprobe data is actually ready, as + * probing is deferred to avoid boot slowdowns. + */ + __u8 ready; }; #endif /* __RISCV_ASM_VDSO_ARCH_DATA_H */ --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/asm-offsets.c @@ -3,6 +3,7 @@ * Copyright (C) 2012 Regents of the University of California * Copyright (C) 2017 SiFive */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/cpu-hotplug.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/cpu-hotplug.c @@ -54,6 +54,7 @@ pr_notice("CPU%u: off\n", cpu); + clear_tasks_mm_cpumask(cpu); /* Verify from the firmware if the cpu is really stopped*/ if (cpu_ops->cpu_is_stopped) ret = cpu_ops->cpu_is_stopped(cpu); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/cpu.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/cpu.c @@ -62,10 +62,8 @@ return -ENODEV; } - if (!of_device_is_available(node)) { - pr_info("CPU with hartid=%lu is not available\n", *hart); + if (!of_device_is_available(node)) return -ENODEV; - } if (of_property_read_string(node, "riscv,isa-base", &isa)) goto old_interface; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/cpufeature.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/cpufeature.c @@ -474,10 +474,10 @@ __RISCV_ISA_EXT_DATA(zacas, RISCV_ISA_EXT_ZACAS), __RISCV_ISA_EXT_DATA(zalrsc, RISCV_ISA_EXT_ZALRSC), __RISCV_ISA_EXT_DATA(zawrs, RISCV_ISA_EXT_ZAWRS), - __RISCV_ISA_EXT_DATA(zfa, RISCV_ISA_EXT_ZFA), + __RISCV_ISA_EXT_DATA_VALIDATE(zfa, RISCV_ISA_EXT_ZFA, riscv_ext_f_depends), __RISCV_ISA_EXT_DATA_VALIDATE(zfbfmin, RISCV_ISA_EXT_ZFBFMIN, riscv_ext_f_depends), - __RISCV_ISA_EXT_DATA(zfh, RISCV_ISA_EXT_ZFH), - __RISCV_ISA_EXT_DATA(zfhmin, RISCV_ISA_EXT_ZFHMIN), + __RISCV_ISA_EXT_DATA_VALIDATE(zfh, RISCV_ISA_EXT_ZFH, riscv_ext_f_depends), + __RISCV_ISA_EXT_DATA_VALIDATE(zfhmin, RISCV_ISA_EXT_ZFHMIN, riscv_ext_f_depends), __RISCV_ISA_EXT_DATA(zca, RISCV_ISA_EXT_ZCA), __RISCV_ISA_EXT_DATA_VALIDATE(zcb, RISCV_ISA_EXT_ZCB, riscv_ext_zca_depends), __RISCV_ISA_EXT_DATA_VALIDATE(zcd, RISCV_ISA_EXT_ZCD, riscv_ext_zcd_validate), @@ -932,9 +932,9 @@ { int cpu; u32 prev_vlenb = 0; - u32 vlenb; + u32 vlenb = 0; - /* Ignore thead,vlenb property if xtheavector is not enabled in the kernel */ + /* Ignore thead,vlenb property if xtheadvector is not enabled in the kernel */ if (!IS_ENABLED(CONFIG_RISCV_ISA_XTHEADVECTOR)) return 0; --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/module-sections.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/module-sections.c @@ -119,6 +119,7 @@ unsigned int num_plts = 0; unsigned int num_gots = 0; Elf_Rela *scratch = NULL; + Elf_Rela *new_scratch; size_t scratch_size = 0; int i; @@ -168,9 +169,12 @@ scratch_size_needed = (num_scratch_relas + num_relas) * sizeof(*scratch); if (scratch_size_needed > scratch_size) { scratch_size = scratch_size_needed; - scratch = kvrealloc(scratch, scratch_size, GFP_KERNEL); - if (!scratch) + new_scratch = kvrealloc(scratch, scratch_size, GFP_KERNEL); + if (!new_scratch) { + kvfree(scratch); return -ENOMEM; + } + scratch = new_scratch; } for (size_t j = 0; j < num_relas; j++) --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/pi/cmdline_early.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/pi/cmdline_early.c @@ -41,9 +41,9 @@ static u64 match_noXlvl(char *cmdline) { if (strstr(cmdline, "no4lvl")) - return SATP_MODE_48; + return SATP_MODE_39; else if (strstr(cmdline, "no5lvl")) - return SATP_MODE_57; + return SATP_MODE_48; return 0; } --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/pi/fdt_early.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/pi/fdt_early.c @@ -3,6 +3,7 @@ #include #include #include +#include #include "pi.h" @@ -183,3 +184,42 @@ return ret; } + +/** + * set_satp_mode_from_fdt - determine SATP mode based on the MMU type in fdt + * + * @dtb_pa: physical address of the device tree blob + * + * Returns the SATP mode corresponding to the MMU type of the first enabled CPU, + * 0 otherwise + */ +u64 set_satp_mode_from_fdt(uintptr_t dtb_pa) +{ + const void *fdt = (const void *)dtb_pa; + const char *mmu_type; + int node, parent; + + parent = fdt_path_offset(fdt, "/cpus"); + if (parent < 0) + return 0; + + fdt_for_each_subnode(node, fdt, parent) { + if (!fdt_node_name_eq(fdt, node, "cpu")) + continue; + + if (!fdt_device_is_available(fdt, node)) + continue; + + mmu_type = fdt_getprop(fdt, node, "mmu-type", NULL); + if (!mmu_type) + break; + + if (!strcmp(mmu_type, "riscv,sv39")) + return SATP_MODE_39; + else if (!strcmp(mmu_type, "riscv,sv48")) + return SATP_MODE_48; + break; + } + + return 0; +} --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/pi/pi.h +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/pi/pi.h @@ -14,6 +14,7 @@ u64 get_kaslr_seed_zkr(const uintptr_t dtb_pa); bool set_nokaslr_from_cmdline(uintptr_t dtb_pa); u64 set_satp_mode_from_cmdline(uintptr_t dtb_pa); +u64 set_satp_mode_from_fdt(uintptr_t dtb_pa); bool fdt_early_match_extension_isa(const void *fdt, const char *ext_name); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/probes/kprobes.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/probes/kprobes.c @@ -49,10 +49,15 @@ post_kprobe_handler(p, kcb, regs); } -static bool __kprobes arch_check_kprobe(struct kprobe *p) +static bool __kprobes arch_check_kprobe(unsigned long addr) { - unsigned long tmp = (unsigned long)p->addr - p->offset; - unsigned long addr = (unsigned long)p->addr; + unsigned long tmp, offset; + + /* start iterating at the closest preceding symbol */ + if (!kallsyms_lookup_size_offset(addr, NULL, &offset)) + return false; + + tmp = addr - offset; while (tmp <= addr) { if (tmp == addr) @@ -71,7 +76,7 @@ if ((unsigned long)insn & 0x1) return -EILSEQ; - if (!arch_check_kprobe(p)) + if (!arch_check_kprobe((unsigned long)p->addr)) return -EILSEQ; /* copy instruction */ --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/process.c @@ -223,7 +223,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct pt_regs *childregs = task_pt_regs(p); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/setup.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/setup.c @@ -330,11 +330,14 @@ /* Parse the ACPI tables for possible boot-time configuration */ acpi_boot_table_init(); + if (acpi_disabled) { #if IS_ENABLED(CONFIG_BUILTIN_DTB) - unflatten_and_copy_device_tree(); + unflatten_and_copy_device_tree(); #else - unflatten_device_tree(); + unflatten_device_tree(); #endif + } + misc_mem_init(); init_resources(); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/stacktrace.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/stacktrace.c @@ -16,6 +16,22 @@ #ifdef CONFIG_FRAME_POINTER +/* + * This disables KASAN checking when reading a value from another task's stack, + * since the other task could be running on another CPU and could have poisoned + * the stack in the meantime. + */ +#define READ_ONCE_TASK_STACK(task, x) \ +({ \ + unsigned long val; \ + unsigned long addr = x; \ + if ((task) == current) \ + val = READ_ONCE(addr); \ + else \ + val = READ_ONCE_NOCHECK(addr); \ + val; \ +}) + extern asmlinkage void handle_exception(void); extern unsigned long ret_from_exception_end; @@ -69,8 +85,9 @@ fp = frame->ra; pc = regs->ra; } else { - fp = frame->fp; - pc = ftrace_graph_ret_addr(current, &graph_idx, frame->ra, + fp = READ_ONCE_TASK_STACK(task, frame->fp); + pc = READ_ONCE_TASK_STACK(task, frame->ra); + pc = ftrace_graph_ret_addr(current, &graph_idx, pc, &frame->ra); if (pc >= (unsigned long)handle_exception && pc < (unsigned long)&ret_from_exception_end) { --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/sys_hwprobe.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/sys_hwprobe.c @@ -5,6 +5,9 @@ * more details. */ #include +#include +#include +#include #include #include #include @@ -27,6 +30,11 @@ bool first = true; int cpu; + if (pair->key != RISCV_HWPROBE_KEY_MVENDORID && + pair->key != RISCV_HWPROBE_KEY_MIMPID && + pair->key != RISCV_HWPROBE_KEY_MARCHID) + goto out; + for_each_cpu(cpu, cpus) { u64 cpu_id; @@ -57,6 +65,7 @@ } } +out: pair->value = id; } @@ -153,14 +162,12 @@ EXT_KEY(ZVKT); } - if (has_fpu()) { - EXT_KEY(ZCD); - EXT_KEY(ZCF); - EXT_KEY(ZFA); - EXT_KEY(ZFBFMIN); - EXT_KEY(ZFH); - EXT_KEY(ZFHMIN); - } + EXT_KEY(ZCD); + EXT_KEY(ZCF); + EXT_KEY(ZFA); + EXT_KEY(ZFBFMIN); + EXT_KEY(ZFH); + EXT_KEY(ZFHMIN); if (IS_ENABLED(CONFIG_RISCV_ISA_SUPM)) EXT_KEY(SUPM); @@ -452,28 +459,32 @@ return 0; } -static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs, - size_t pair_count, size_t cpusetsize, - unsigned long __user *cpus_user, - unsigned int flags) -{ - if (flags & RISCV_HWPROBE_WHICH_CPUS) - return hwprobe_get_cpus(pairs, pair_count, cpusetsize, - cpus_user, flags); +#ifdef CONFIG_MMU - return hwprobe_get_values(pairs, pair_count, cpusetsize, - cpus_user, flags); +static DECLARE_COMPLETION(boot_probes_done); +static atomic_t pending_boot_probes = ATOMIC_INIT(1); + +void riscv_hwprobe_register_async_probe(void) +{ + atomic_inc(&pending_boot_probes); } -#ifdef CONFIG_MMU +void riscv_hwprobe_complete_async_probe(void) +{ + if (atomic_dec_and_test(&pending_boot_probes)) + complete(&boot_probes_done); +} -static int __init init_hwprobe_vdso_data(void) +static int complete_hwprobe_vdso_data(void) { struct vdso_arch_data *avd = vdso_k_arch_data; u64 id_bitsmash = 0; struct riscv_hwprobe pair; int key; + if (unlikely(!atomic_dec_and_test(&pending_boot_probes))) + wait_for_completion(&boot_probes_done); + /* * Initialize vDSO data with the answers for the "all CPUs" case, to * save a syscall in the common case. @@ -501,13 +512,52 @@ * vDSO should defer to the kernel for exotic cpu masks. */ avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1; + + /* + * Make sure all the VDSO values are visible before we look at them. + * This pairs with the implicit "no speculativly visible accesses" + * barrier in the VDSO hwprobe code. + */ + smp_wmb(); + avd->ready = true; + return 0; +} + +static int __init init_hwprobe_vdso_data(void) +{ + struct vdso_arch_data *avd = vdso_k_arch_data; + + /* + * Prevent the vDSO cached values from being used, as they're not ready + * yet. + */ + avd->ready = false; return 0; } arch_initcall_sync(init_hwprobe_vdso_data); +#else + +static int complete_hwprobe_vdso_data(void) { return 0; } + #endif /* CONFIG_MMU */ +static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs, + size_t pair_count, size_t cpusetsize, + unsigned long __user *cpus_user, + unsigned int flags) +{ + DO_ONCE_SLEEPABLE(complete_hwprobe_vdso_data); + + if (flags & RISCV_HWPROBE_WHICH_CPUS) + return hwprobe_get_cpus(pairs, pair_count, cpusetsize, + cpus_user, flags); + + return hwprobe_get_values(pairs, pair_count, cpusetsize, + cpus_user, flags); +} + SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs, size_t, pair_count, size_t, cpusetsize, unsigned long __user *, cpus, unsigned int, flags) --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/unaligned_access_speed.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/unaligned_access_speed.c @@ -379,6 +379,7 @@ static int __init vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) { schedule_on_each_cpu(check_vector_unaligned_access); + riscv_hwprobe_complete_async_probe(); return 0; } @@ -473,8 +474,12 @@ per_cpu(vector_misaligned_access, cpu) = unaligned_vector_speed_param; } else if (!check_vector_unaligned_access_emulated_all_cpus() && IS_ENABLED(CONFIG_RISCV_PROBE_VECTOR_UNALIGNED_ACCESS)) { - kthread_run(vec_check_unaligned_access_speed_all_cpus, - NULL, "vec_check_unaligned_access_speed_all_cpus"); + riscv_hwprobe_register_async_probe(); + if (IS_ERR(kthread_run(vec_check_unaligned_access_speed_all_cpus, + NULL, "vec_check_unaligned_access_speed_all_cpus"))) { + pr_warn("Failed to create vec_unalign_check kthread\n"); + riscv_hwprobe_complete_async_probe(); + } } /* --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kernel/vdso/hwprobe.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kernel/vdso/hwprobe.c @@ -27,7 +27,7 @@ * homogeneous, then this function can handle requests for arbitrary * masks. */ - if ((flags != 0) || (!all_cpus && !avd->homogeneous_cpus)) + if (flags != 0 || (!all_cpus && !avd->homogeneous_cpus) || unlikely(!avd->ready)) return riscv_hwprobe(pairs, pair_count, cpusetsize, cpus, flags); /* This is something we can handle, fill out the pairs. */ --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kvm/vcpu_insn.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kvm/vcpu_insn.c @@ -424,6 +424,22 @@ return (rc <= 0) ? rc : 1; } +static bool is_load_guest_page_fault(unsigned long scause) +{ + /** + * If a g-stage page fault occurs, the direct approach + * is to let the g-stage page fault handler handle it + * naturally, however, calling the g-stage page fault + * handler here seems rather strange. + * Considering this is a corner case, we can directly + * return to the guest and re-execute the same PC, this + * will trigger a g-stage page fault again and then the + * regular g-stage page fault handler will populate + * g-stage page table. + */ + return (scause == EXC_LOAD_GUEST_PAGE_FAULT); +} + /** * kvm_riscv_vcpu_virtual_insn -- Handle virtual instruction trap * @@ -449,6 +465,8 @@ ct->sepc, &utrap); if (utrap.scause) { + if (is_load_guest_page_fault(utrap.scause)) + return 1; utrap.sepc = ct->sepc; kvm_riscv_vcpu_trap_redirect(vcpu, &utrap); return 1; @@ -504,6 +522,8 @@ insn = kvm_riscv_vcpu_unpriv_read(vcpu, true, ct->sepc, &utrap); if (utrap.scause) { + if (is_load_guest_page_fault(utrap.scause)) + return 1; /* Redirect trap if we failed to read instruction */ utrap.sepc = ct->sepc; kvm_riscv_vcpu_trap_redirect(vcpu, &utrap); @@ -630,6 +650,8 @@ insn = kvm_riscv_vcpu_unpriv_read(vcpu, true, ct->sepc, &utrap); if (utrap.scause) { + if (is_load_guest_page_fault(utrap.scause)) + return 1; /* Redirect trap if we failed to read instruction */ utrap.sepc = ct->sepc; kvm_riscv_vcpu_trap_redirect(vcpu, &utrap); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/kvm/vmid.c +++ linux-riscv-6.17-6.17.0/arch/riscv/kvm/vmid.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -28,7 +29,7 @@ /* Figure-out number of VMID bits in HW */ old = csr_read(CSR_HGATP); - csr_write(CSR_HGATP, old | HGATP_VMID); + csr_write(CSR_HGATP, (kvm_riscv_gstage_mode << HGATP_MODE_SHIFT) | HGATP_VMID); vmid_bits = csr_read(CSR_HGATP); vmid_bits = (vmid_bits & HGATP_VMID) >> HGATP_VMID_SHIFT; vmid_bits = fls_long(vmid_bits); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/mm/init.c +++ linux-riscv-6.17-6.17.0/arch/riscv/mm/init.c @@ -816,6 +816,7 @@ #if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL) u64 __pi_set_satp_mode_from_cmdline(uintptr_t dtb_pa); +u64 __pi_set_satp_mode_from_fdt(uintptr_t dtb_pa); static void __init disable_pgtable_l5(void) { @@ -855,18 +856,22 @@ * underlying hardware: establish 1:1 mapping in 4-level page table mode * then read SATP to see if the configuration was taken into account * meaning sv48 is supported. + * The maximum SATP mode is limited by both the command line and the "mmu-type" + * property in the device tree, since some platforms may hang if an unsupported + * SATP mode is attempted. */ static __init void set_satp_mode(uintptr_t dtb_pa) { u64 identity_satp, hw_satp; uintptr_t set_satp_mode_pmd = ((unsigned long)set_satp_mode) & PMD_MASK; - u64 satp_mode_cmdline = __pi_set_satp_mode_from_cmdline(dtb_pa); + u64 satp_mode_limit = min_not_zero(__pi_set_satp_mode_from_cmdline(dtb_pa), + __pi_set_satp_mode_from_fdt(dtb_pa)); kernel_map.page_offset = PAGE_OFFSET_L5; - if (satp_mode_cmdline == SATP_MODE_57) { + if (satp_mode_limit == SATP_MODE_48) { disable_pgtable_l5(); - } else if (satp_mode_cmdline == SATP_MODE_48) { + } else if (satp_mode_limit == SATP_MODE_39) { disable_pgtable_l5(); disable_pgtable_l4(); return; @@ -909,6 +914,10 @@ disable_pgtable_l4(); } + /* UBUNTU: Force disable sv57 and fallback to sv48 */ + if (pgtable_l5_enabled) + disable_pgtable_l5(); + memset(early_pg_dir, 0, PAGE_SIZE); memset(early_p4d, 0, PAGE_SIZE); memset(early_pud, 0, PAGE_SIZE); --- linux-riscv-6.17-6.17.0.orig/arch/riscv/mm/ptdump.c +++ linux-riscv-6.17-6.17.0/arch/riscv/mm/ptdump.c @@ -21,7 +21,7 @@ #define pt_dump_seq_puts(m, fmt) \ ({ \ if (m) \ - seq_printf(m, fmt); \ + seq_puts(m, fmt); \ }) /* --- linux-riscv-6.17-6.17.0.orig/arch/riscv/net/bpf_jit_comp64.c +++ linux-riscv-6.17-6.17.0/arch/riscv/net/bpf_jit_comp64.c @@ -765,6 +765,39 @@ return 0; } +/* + * Sign-extend the register if necessary + */ +static int sign_extend(u8 rd, u8 rs, u8 sz, bool sign, struct rv_jit_context *ctx) +{ + if (!sign && (sz == 1 || sz == 2)) { + if (rd != rs) + emit_mv(rd, rs, ctx); + return 0; + } + + switch (sz) { + case 1: + emit_sextb(rd, rs, ctx); + break; + case 2: + emit_sexth(rd, rs, ctx); + break; + case 4: + emit_sextw(rd, rs, ctx); + break; + case 8: + if (rd != rs) + emit_mv(rd, rs, ctx); + break; + default: + pr_err("bpf-jit: invalid size %d for sign_extend\n", sz); + return -EINVAL; + } + + return 0; +} + #define BPF_FIXUP_OFFSET_MASK GENMASK(26, 0) #define BPF_FIXUP_REG_MASK GENMASK(31, 27) #define REG_DONT_CLEAR_MARKER 0 /* RV_REG_ZERO unused in pt_regmap */ @@ -1079,10 +1112,9 @@ stack_size += 16; save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET); - if (save_ret) { + if (save_ret) stack_size += 16; /* Save both A5 (BPF R0) and A0 */ - retval_off = stack_size; - } + retval_off = stack_size; stack_size += nr_arg_slots * 8; args_off = stack_size; @@ -1226,8 +1258,15 @@ restore_args(min_t(int, nr_arg_slots, RV_MAX_REG_ARGS), args_off, ctx); if (save_ret) { - emit_ld(RV_REG_A0, -retval_off, RV_REG_FP, ctx); emit_ld(regmap[BPF_REG_0], -(retval_off - 8), RV_REG_FP, ctx); + if (is_struct_ops) { + ret = sign_extend(RV_REG_A0, regmap[BPF_REG_0], m->ret_size, + m->ret_flags & BTF_FMODEL_SIGNED_ARG, ctx); + if (ret) + goto out; + } else { + emit_ld(RV_REG_A0, -retval_off, RV_REG_FP, ctx); + } } emit_ld(RV_REG_S1, -sreg_off, RV_REG_FP, ctx); --- linux-riscv-6.17-6.17.0.orig/arch/s390/Kconfig +++ linux-riscv-6.17-6.17.0/arch/s390/Kconfig @@ -151,7 +151,6 @@ select ARCH_WANT_IRQS_OFF_ACTIVATE_MM select ARCH_WANT_KERNEL_PMD_MKWRITE select ARCH_WANT_LD_ORPHAN_WARN - select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP select ARCH_WANTS_THP_SWAP select BUILDTIME_TABLE_SORT select CLONE_BACKWARDS2 --- linux-riscv-6.17-6.17.0.orig/arch/s390/Makefile +++ linux-riscv-6.17-6.17.0/arch/s390/Makefile @@ -25,6 +25,7 @@ KBUILD_CFLAGS_DECOMPRESSOR := $(CLANG_FLAGS) -m64 -O2 -mpacked-stack -std=gnu11 KBUILD_CFLAGS_DECOMPRESSOR += -DDISABLE_BRANCH_PROFILING -D__NO_FORTIFY KBUILD_CFLAGS_DECOMPRESSOR += -D__DECOMPRESSOR +KBUILD_CFLAGS_DECOMPRESSOR += -Wno-pointer-sign KBUILD_CFLAGS_DECOMPRESSOR += -fno-delete-null-pointer-checks -msoft-float -mbackchain KBUILD_CFLAGS_DECOMPRESSOR += -fno-asynchronous-unwind-tables KBUILD_CFLAGS_DECOMPRESSOR += -ffreestanding --- linux-riscv-6.17-6.17.0.orig/arch/s390/crypto/phmac_s390.c +++ linux-riscv-6.17-6.17.0/arch/s390/crypto/phmac_s390.c @@ -169,11 +169,18 @@ u64 buflen[2]; }; +enum async_op { + OP_NOP = 0, + OP_UPDATE, + OP_FINAL, + OP_FINUP, +}; + /* phmac request context */ struct phmac_req_ctx { struct hash_walk_helper hwh; struct kmac_sha2_ctx kmac_ctx; - bool final; + enum async_op async_op; }; /* @@ -610,6 +617,7 @@ * using engine to serialize requests. */ if (rc == 0 || rc == -EKEYEXPIRED) { + req_ctx->async_op = OP_UPDATE; atomic_inc(&tfm_ctx->via_engine_ctr); rc = crypto_transfer_hash_request_to_engine(phmac_crypto_engine, req); if (rc != -EINPROGRESS) @@ -647,8 +655,7 @@ * using engine to serialize requests. */ if (rc == 0 || rc == -EKEYEXPIRED) { - req->nbytes = 0; - req_ctx->final = true; + req_ctx->async_op = OP_FINAL; atomic_inc(&tfm_ctx->via_engine_ctr); rc = crypto_transfer_hash_request_to_engine(phmac_crypto_engine, req); if (rc != -EINPROGRESS) @@ -676,13 +683,16 @@ if (rc) goto out; + req_ctx->async_op = OP_FINUP; + /* Try synchronous operations if no active engine usage */ if (!atomic_read(&tfm_ctx->via_engine_ctr)) { rc = phmac_kmac_update(req, false); if (rc == 0) - req->nbytes = 0; + req_ctx->async_op = OP_FINAL; } - if (!rc && !req->nbytes && !atomic_read(&tfm_ctx->via_engine_ctr)) { + if (!rc && req_ctx->async_op == OP_FINAL && + !atomic_read(&tfm_ctx->via_engine_ctr)) { rc = phmac_kmac_final(req, false); if (rc == 0) goto out; @@ -694,7 +704,7 @@ * using engine to serialize requests. */ if (rc == 0 || rc == -EKEYEXPIRED) { - req_ctx->final = true; + /* req->async_op has been set to either OP_FINUP or OP_FINAL */ atomic_inc(&tfm_ctx->via_engine_ctr); rc = crypto_transfer_hash_request_to_engine(phmac_crypto_engine, req); if (rc != -EINPROGRESS) @@ -855,15 +865,16 @@ /* * Three kinds of requests come in here: - * update when req->nbytes > 0 and req_ctx->final is false - * final when req->nbytes = 0 and req_ctx->final is true - * finup when req->nbytes > 0 and req_ctx->final is true - * For update and finup the hwh walk needs to be prepared and - * up to date but the actual nr of bytes in req->nbytes may be - * any non zero number. For final there is no hwh walk needed. + * 1. req->async_op == OP_UPDATE with req->nbytes > 0 + * 2. req->async_op == OP_FINUP with req->nbytes > 0 + * 3. req->async_op == OP_FINAL + * For update and finup the hwh walk has already been prepared + * by the caller. For final there is no hwh walk needed. */ - if (req->nbytes) { + switch (req_ctx->async_op) { + case OP_UPDATE: + case OP_FINUP: rc = phmac_kmac_update(req, true); if (rc == -EKEYEXPIRED) { /* @@ -880,10 +891,11 @@ hwh_advance(hwh, rc); goto out; } - req->nbytes = 0; - } - - if (req_ctx->final) { + if (req_ctx->async_op == OP_UPDATE) + break; + req_ctx->async_op = OP_FINAL; + fallthrough; + case OP_FINAL: rc = phmac_kmac_final(req, true); if (rc == -EKEYEXPIRED) { /* @@ -897,10 +909,14 @@ cond_resched(); return -ENOSPC; } + break; + default: + /* unknown/unsupported/unimplemented asynch op */ + return -EOPNOTSUPP; } out: - if (rc || req_ctx->final) + if (rc || req_ctx->async_op == OP_FINAL) memzero_explicit(kmac_ctx, sizeof(*kmac_ctx)); pr_debug("request complete with rc=%d\n", rc); local_bh_disable(); --- linux-riscv-6.17-6.17.0.orig/arch/s390/include/asm/fpu-insn.h +++ linux-riscv-6.17-6.17.0/arch/s390/include/asm/fpu-insn.h @@ -12,6 +12,7 @@ #ifndef __ASSEMBLER__ #include +#include #include asm(".include \"asm/fpu-insn-asm.h\"\n"); @@ -393,6 +394,7 @@ : [vxr] "=Q" (*(u8 *)vxr) : [index] "d" (index), [v1] "I" (v1) : "memory"); + kmsan_unpoison_memory(vxr, size); } #else /* CONFIG_CC_HAS_ASM_AOR_FORMAT_FLAGS */ @@ -409,6 +411,7 @@ : [vxr] "=R" (*(u8 *)vxr) : [index] "d" (index), [v1] "I" (v1) : "memory", "1"); + kmsan_unpoison_memory(vxr, size); } #endif /* CONFIG_CC_HAS_ASM_AOR_FORMAT_FLAGS */ --- linux-riscv-6.17-6.17.0.orig/arch/s390/include/asm/ipl.h +++ linux-riscv-6.17-6.17.0/arch/s390/include/asm/ipl.h @@ -139,6 +139,7 @@ unsigned char flags, unsigned short cert); int ipl_report_add_certificate(struct ipl_report *report, void *key, unsigned long addr, unsigned long len); +bool ipl_get_secureboot(void); /* * DIAG 308 support --- linux-riscv-6.17-6.17.0.orig/arch/s390/include/asm/kvm_host.h +++ linux-riscv-6.17-6.17.0/arch/s390/include/asm/kvm_host.h @@ -356,7 +356,7 @@ int counters[FIRQ_MAX_COUNT]; struct kvm_s390_mchk_info mchk; struct kvm_s390_ext_info srv_signal; - int next_rr_cpu; + int last_sleep_cpu; struct mutex ais_lock; u8 simm; u8 nimm; --- linux-riscv-6.17-6.17.0.orig/arch/s390/include/asm/pci.h +++ linux-riscv-6.17-6.17.0/arch/s390/include/asm/pci.h @@ -145,7 +145,6 @@ u8 has_resources : 1; u8 is_physfn : 1; u8 util_str_avail : 1; - u8 irqs_registered : 1; u8 tid_avail : 1; u8 rtr_avail : 1; /* Relaxed translation allowed */ unsigned int devfn; /* DEVFN part of the RID*/ --- linux-riscv-6.17-6.17.0.orig/arch/s390/include/asm/pgtable.h +++ linux-riscv-6.17-6.17.0/arch/s390/include/asm/pgtable.h @@ -1154,17 +1154,15 @@ #define IPTE_NODAT 0x400 #define IPTE_GUEST_ASCE 0x800 -static __always_inline void __ptep_rdp(unsigned long addr, pte_t *ptep, - unsigned long opt, unsigned long asce, - int local) +static __always_inline void __ptep_rdp(unsigned long addr, pte_t *ptep, int local) { unsigned long pto; pto = __pa(ptep) & ~(PTRS_PER_PTE * sizeof(pte_t) - 1); - asm volatile(".insn rrf,0xb98b0000,%[r1],%[r2],%[asce],%[m4]" + asm volatile(".insn rrf,0xb98b0000,%[r1],%[r2],%%r0,%[m4]" : "+m" (*ptep) - : [r1] "a" (pto), [r2] "a" ((addr & PAGE_MASK) | opt), - [asce] "a" (asce), [m4] "i" (local)); + : [r1] "a" (pto), [r2] "a" (addr & PAGE_MASK), + [m4] "i" (local)); } static __always_inline void __ptep_ipte(unsigned long address, pte_t *ptep, @@ -1348,7 +1346,7 @@ * A local RDP can be used to do the flush. */ if (cpu_has_rdp() && !(pte_val(*ptep) & _PAGE_PROTECT)) - __ptep_rdp(address, ptep, 0, 0, 1); + __ptep_rdp(address, ptep, 1); } #define flush_tlb_fix_spurious_fault flush_tlb_fix_spurious_fault @@ -2055,4 +2053,26 @@ return res; } +static inline pgste_t pgste_get_lock(pte_t *ptep) +{ + unsigned long value = 0; +#ifdef CONFIG_PGSTE + unsigned long *ptr = (unsigned long *)(ptep + PTRS_PER_PTE); + + do { + value = __atomic64_or_barrier(PGSTE_PCL_BIT, ptr); + } while (value & PGSTE_PCL_BIT); + value |= PGSTE_PCL_BIT; +#endif + return __pgste(value); +} + +static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + barrier(); + WRITE_ONCE(*(unsigned long *)(ptep + PTRS_PER_PTE), pgste_val(pgste) & ~PGSTE_PCL_BIT); +#endif +} + #endif /* _S390_PAGE_H */ --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/asm-offsets.c @@ -4,6 +4,7 @@ * This code generates raw asm output which is post-processed to extract * and format the required data. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/ipl.c +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/ipl.c @@ -2497,3 +2497,8 @@ } #endif + +bool ipl_get_secureboot(void) +{ + return !!ipl_secure_flag; +} --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/process.c @@ -106,7 +106,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long new_stackp = args->stack; unsigned long tls = args->tls; struct fake_frame --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/setup.c +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/setup.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -919,6 +920,9 @@ log_component_list(); + if (ipl_get_secureboot()) + security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX); + /* Have one command line that is parsed and saved in /proc/cmdline */ /* boot_command_line has been already set up in early.c */ *cmdline_p = boot_command_line; --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/smp.c +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/smp.c @@ -697,6 +697,7 @@ continue; info->core[info->configured].core_id = address >> smp_cpu_mt_shift; + info->core[info->configured].type = boot_core_type; info->configured++; } info->combined = info->configured; --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/topology.c +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/topology.c @@ -509,33 +509,27 @@ return rc; } -static const struct cpumask *cpu_thread_mask(int cpu) -{ - return &cpu_topology[cpu].thread_mask; -} - - const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_topology[cpu].core_mask; } -static const struct cpumask *cpu_book_mask(int cpu) +static const struct cpumask *tl_book_mask(struct sched_domain_topology_level *tl, int cpu) { return &cpu_topology[cpu].book_mask; } -static const struct cpumask *cpu_drawer_mask(int cpu) +static const struct cpumask *tl_drawer_mask(struct sched_domain_topology_level *tl, int cpu) { return &cpu_topology[cpu].drawer_mask; } static struct sched_domain_topology_level s390_topology[] = { - SDTL_INIT(cpu_thread_mask, cpu_smt_flags, SMT), - SDTL_INIT(cpu_coregroup_mask, cpu_core_flags, MC), - SDTL_INIT(cpu_book_mask, NULL, BOOK), - SDTL_INIT(cpu_drawer_mask, NULL, DRAWER), - SDTL_INIT(cpu_cpu_mask, NULL, PKG), + SDTL_INIT(tl_smt_mask, cpu_smt_flags, SMT), + SDTL_INIT(tl_mc_mask, cpu_core_flags, MC), + SDTL_INIT(tl_book_mask, NULL, BOOK), + SDTL_INIT(tl_drawer_mask, NULL, DRAWER), + SDTL_INIT(tl_pkg_mask, NULL, PKG), { NULL, }, }; --- linux-riscv-6.17-6.17.0.orig/arch/s390/kernel/vmlinux.lds.S +++ linux-riscv-6.17-6.17.0/arch/s390/kernel/vmlinux.lds.S @@ -209,6 +209,33 @@ . = ALIGN(PAGE_SIZE); _end = . ; + /* Debugging sections. */ + STABS_DEBUG + DWARF_DEBUG + ELF_DETAILS + + /* + * Make sure that the .got.plt is either completely empty or it + * contains only the three reserved double words. + */ + .got.plt : { + *(.got.plt) + } + ASSERT(SIZEOF(.got.plt) == 0 || SIZEOF(.got.plt) == 0x18, "Unexpected GOT/PLT entries detected!") + + /* + * Sections that should stay zero sized, which is safer to + * explicitly check instead of blindly discarding. + */ + .plt : { + *(.plt) *(.plt.*) *(.iplt) *(.igot .igot.plt) + } + ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!") + .rela.dyn : { + *(.rela.*) *(.rela_*) + } + ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!") + /* * uncompressed image info used by the decompressor * it should match struct vmlinux_info @@ -239,33 +266,6 @@ #endif } :NONE - /* Debugging sections. */ - STABS_DEBUG - DWARF_DEBUG - ELF_DETAILS - - /* - * Make sure that the .got.plt is either completely empty or it - * contains only the three reserved double words. - */ - .got.plt : { - *(.got.plt) - } - ASSERT(SIZEOF(.got.plt) == 0 || SIZEOF(.got.plt) == 0x18, "Unexpected GOT/PLT entries detected!") - - /* - * Sections that should stay zero sized, which is safer to - * explicitly check instead of blindly discarding. - */ - .plt : { - *(.plt) *(.plt.*) *(.iplt) *(.igot .igot.plt) - } - ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!") - .rela.dyn : { - *(.rela.*) *(.rela_*) - } - ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!") - /* Sections to be discarded */ DISCARDS /DISCARD/ : { --- linux-riscv-6.17-6.17.0.orig/arch/s390/kvm/interrupt.c +++ linux-riscv-6.17-6.17.0/arch/s390/kvm/interrupt.c @@ -1323,6 +1323,7 @@ VCPU_EVENT(vcpu, 4, "enabled wait: %llu ns", sltime); no_timer: kvm_vcpu_srcu_read_unlock(vcpu); + vcpu->kvm->arch.float_int.last_sleep_cpu = vcpu->vcpu_idx; kvm_vcpu_halt(vcpu); vcpu->valid_wakeup = false; __unset_cpu_idle(vcpu); @@ -1949,18 +1950,15 @@ if (!online_vcpus) return; - /* find idle VCPUs first, then round robin */ - sigcpu = find_first_bit(kvm->arch.idle_mask, online_vcpus); - if (sigcpu == online_vcpus) { - do { - sigcpu = kvm->arch.float_int.next_rr_cpu++; - kvm->arch.float_int.next_rr_cpu %= online_vcpus; - /* avoid endless loops if all vcpus are stopped */ - if (nr_tries++ >= online_vcpus) - return; - } while (is_vcpu_stopped(kvm_get_vcpu(kvm, sigcpu))); + for (sigcpu = kvm->arch.float_int.last_sleep_cpu; ; sigcpu++) { + sigcpu %= online_vcpus; + dst_vcpu = kvm_get_vcpu(kvm, sigcpu); + if (!is_vcpu_stopped(dst_vcpu)) + break; + /* avoid endless loops if all vcpus are stopped */ + if (nr_tries++ >= online_vcpus) + return; } - dst_vcpu = kvm_get_vcpu(kvm, sigcpu); /* make the VCPU drop out of the SIE, or wake it up if sleeping */ switch (type) { --- linux-riscv-6.17-6.17.0.orig/arch/s390/mm/dump_pagetables.c +++ linux-riscv-6.17-6.17.0/arch/s390/mm/dump_pagetables.c @@ -291,16 +291,14 @@ static int add_marker(unsigned long start, unsigned long end, const char *name) { - size_t oldsize, newsize; + struct addr_marker *new; + size_t newsize; - oldsize = markers_cnt * sizeof(*markers); - newsize = oldsize + 2 * sizeof(*markers); - if (!oldsize) - markers = kvmalloc(newsize, GFP_KERNEL); - else - markers = kvrealloc(markers, newsize, GFP_KERNEL); - if (!markers) - goto error; + newsize = (markers_cnt + 2) * sizeof(*markers); + new = kvrealloc(markers, newsize, GFP_KERNEL); + if (!new) + return -ENOMEM; + markers = new; markers[markers_cnt].is_start = 1; markers[markers_cnt].start_address = start; markers[markers_cnt].size = end - start; @@ -312,9 +310,6 @@ markers[markers_cnt].name = name; markers_cnt++; return 0; -error: - markers_cnt = 0; - return -ENOMEM; } static int pt_dump_init(void) --- linux-riscv-6.17-6.17.0.orig/arch/s390/mm/gmap_helpers.c +++ linux-riscv-6.17-6.17.0/arch/s390/mm/gmap_helpers.c @@ -15,6 +15,7 @@ #include #include #include +#include /** * ptep_zap_swap_entry() - discard a swap entry. @@ -47,6 +48,7 @@ { struct vm_area_struct *vma; spinlock_t *ptl; + pgste_t pgste; pte_t *ptep; mmap_assert_locked(mm); @@ -60,8 +62,16 @@ ptep = get_locked_pte(mm, vmaddr, &ptl); if (unlikely(!ptep)) return; - if (pte_swap(*ptep)) + if (pte_swap(*ptep)) { + preempt_disable(); + pgste = pgste_get_lock(ptep); + ptep_zap_swap_entry(mm, pte_to_swp_entry(*ptep)); + pte_clear(mm, vmaddr, ptep); + + pgste_set_unlock(ptep, pgste); + preempt_enable(); + } pte_unmap_unlock(ptep, ptl); } EXPORT_SYMBOL_GPL(gmap_helper_zap_one_page); --- linux-riscv-6.17-6.17.0.orig/arch/s390/mm/pgalloc.c +++ linux-riscv-6.17-6.17.0/arch/s390/mm/pgalloc.c @@ -16,9 +16,13 @@ unsigned long *crst_table_alloc(struct mm_struct *mm) { - struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL, CRST_ALLOC_ORDER); + gfp_t gfp = GFP_KERNEL_ACCOUNT; + struct ptdesc *ptdesc; unsigned long *table; + if (mm == &init_mm) + gfp &= ~__GFP_ACCOUNT; + ptdesc = pagetable_alloc(gfp, CRST_ALLOC_ORDER); if (!ptdesc) return NULL; table = ptdesc_to_virt(ptdesc); @@ -117,7 +121,7 @@ struct ptdesc *ptdesc; u64 *table; - ptdesc = pagetable_alloc(GFP_KERNEL, 0); + ptdesc = pagetable_alloc(GFP_KERNEL_ACCOUNT, 0); if (ptdesc) { table = (u64 *)ptdesc_to_virt(ptdesc); __arch_set_page_dat(table, 1); @@ -136,10 +140,13 @@ unsigned long *page_table_alloc(struct mm_struct *mm) { + gfp_t gfp = GFP_KERNEL_ACCOUNT; struct ptdesc *ptdesc; unsigned long *table; - ptdesc = pagetable_alloc(GFP_KERNEL, 0); + if (mm == &init_mm) + gfp &= ~__GFP_ACCOUNT; + ptdesc = pagetable_alloc(gfp, 0); if (!ptdesc) return NULL; if (!pagetable_pte_ctor(mm, ptdesc)) { --- linux-riscv-6.17-6.17.0.orig/arch/s390/mm/pgtable.c +++ linux-riscv-6.17-6.17.0/arch/s390/mm/pgtable.c @@ -24,6 +24,7 @@ #include #include #include +#include #include pgprot_t pgprot_writecombine(pgprot_t prot) @@ -115,28 +116,6 @@ return old; } -static inline pgste_t pgste_get_lock(pte_t *ptep) -{ - unsigned long value = 0; -#ifdef CONFIG_PGSTE - unsigned long *ptr = (unsigned long *)(ptep + PTRS_PER_PTE); - - do { - value = __atomic64_or_barrier(PGSTE_PCL_BIT, ptr); - } while (value & PGSTE_PCL_BIT); - value |= PGSTE_PCL_BIT; -#endif - return __pgste(value); -} - -static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) -{ -#ifdef CONFIG_PGSTE - barrier(); - WRITE_ONCE(*(unsigned long *)(ptep + PTRS_PER_PTE), pgste_val(pgste) & ~PGSTE_PCL_BIT); -#endif -} - static inline pgste_t pgste_get(pte_t *ptep) { unsigned long pgste = 0; @@ -295,9 +274,9 @@ preempt_disable(); atomic_inc(&mm->context.flush_count); if (cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) - __ptep_rdp(addr, ptep, 0, 0, 1); + __ptep_rdp(addr, ptep, 1); else - __ptep_rdp(addr, ptep, 0, 0, 0); + __ptep_rdp(addr, ptep, 0); /* * PTE is not invalidated by RDP, only _PAGE_PROTECT is cleared. That * means it is still valid and active, and must not be changed according --- linux-riscv-6.17-6.17.0.orig/arch/s390/net/bpf_jit_comp.c +++ linux-riscv-6.17-6.17.0/arch/s390/net/bpf_jit_comp.c @@ -1790,20 +1790,21 @@ REG_SET_SEEN(BPF_REG_5); jit->seen |= SEEN_FUNC; + /* * Copy the tail call counter to where the callee expects it. - * - * Note 1: The callee can increment the tail call counter, but - * we do not load it back, since the x86 JIT does not do this - * either. - * - * Note 2: We assume that the verifier does not let us call the - * main program, which clears the tail call counter on entry. */ - /* mvc tail_call_cnt(4,%r15),frame_off+tail_call_cnt(%r15) */ - _EMIT6(0xd203f000 | offsetof(struct prog_frame, tail_call_cnt), - 0xf000 | (jit->frame_off + - offsetof(struct prog_frame, tail_call_cnt))); + + if (insn->src_reg == BPF_PSEUDO_CALL) + /* + * mvc tail_call_cnt(4,%r15), + * frame_off+tail_call_cnt(%r15) + */ + _EMIT6(0xd203f000 | offsetof(struct prog_frame, + tail_call_cnt), + 0xf000 | (jit->frame_off + + offsetof(struct prog_frame, + tail_call_cnt))); /* Sign-extend the kfunc arguments. */ if (insn->src_reg == BPF_PSEUDO_KFUNC_CALL) { @@ -1825,6 +1826,22 @@ call_r1(jit); /* lgr %b0,%r2: load return value into %b0 */ EMIT4(0xb9040000, BPF_REG_0, REG_2); + + /* + * Copy the potentially updated tail call counter back. + */ + + if (insn->src_reg == BPF_PSEUDO_CALL) + /* + * mvc frame_off+tail_call_cnt(%r15), + * tail_call_cnt(4,%r15) + */ + _EMIT6(0xd203f000 | (jit->frame_off + + offsetof(struct prog_frame, + tail_call_cnt)), + 0xf000 | offsetof(struct prog_frame, + tail_call_cnt)); + break; } case BPF_JMP | BPF_TAIL_CALL: { @@ -2822,6 +2839,9 @@ /* stg %r2,retval_off(%r15) */ EMIT6_DISP_LH(0xe3000000, 0x0024, REG_2, REG_0, REG_15, tjit->retval_off); + /* mvc tccnt_off(%r15),tail_call_cnt(4,%r15) */ + _EMIT6(0xd203f000 | tjit->tccnt_off, + 0xf000 | offsetof(struct prog_frame, tail_call_cnt)); im->ip_after_call = jit->prg_buf + jit->prg; --- linux-riscv-6.17-6.17.0.orig/arch/s390/pci/pci_event.c +++ linux-riscv-6.17-6.17.0/arch/s390/pci/pci_event.c @@ -88,6 +88,7 @@ pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT; ers_res = driver->err_handler->error_detected(pdev, pdev->error_state); + pci_uevent_ers(pdev, ers_res); if (ers_result_indicates_abort(ers_res)) pr_info("%s: Automatic recovery failed after initial reporting\n", pci_name(pdev)); else if (ers_res == PCI_ERS_RESULT_NEED_RESET) @@ -187,7 +188,7 @@ * is unbound or probed and that userspace can't access its * configuration space while we perform recovery. */ - pci_dev_lock(pdev); + device_lock(&pdev->dev); if (pdev->error_state == pci_channel_io_perm_failure) { ers_res = PCI_ERS_RESULT_DISCONNECT; goto out_unlock; @@ -244,6 +245,7 @@ ers_res = PCI_ERS_RESULT_RECOVERED; if (ers_res != PCI_ERS_RESULT_RECOVERED) { + pci_uevent_ers(pdev, PCI_ERS_RESULT_DISCONNECT); pr_err("%s: Automatic recovery failed; operator intervention is required\n", pci_name(pdev)); status_str = "failed (driver can't recover)"; @@ -253,8 +255,9 @@ pr_info("%s: The device is ready to resume operations\n", pci_name(pdev)); if (driver->err_handler->resume) driver->err_handler->resume(pdev); + pci_uevent_ers(pdev, PCI_ERS_RESULT_RECOVERED); out_unlock: - pci_dev_unlock(pdev); + device_unlock(&pdev->dev); zpci_report_status(zdev, "recovery", status_str); return ers_res; --- linux-riscv-6.17-6.17.0.orig/arch/s390/pci/pci_irq.c +++ linux-riscv-6.17-6.17.0/arch/s390/pci/pci_irq.c @@ -107,9 +107,6 @@ else rc = zpci_set_airq(zdev); - if (!rc) - zdev->irqs_registered = 1; - return rc; } @@ -123,9 +120,6 @@ else rc = zpci_clear_airq(zdev); - if (!rc) - zdev->irqs_registered = 0; - return rc; } @@ -427,8 +421,7 @@ { struct zpci_dev *zdev = to_zpci(pdev); - if (!zdev->irqs_registered) - zpci_set_irq(zdev); + zpci_set_irq(zdev); return true; } --- linux-riscv-6.17-6.17.0.orig/arch/sh/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/sh/kernel/asm-offsets.c @@ -8,6 +8,7 @@ * compile this file to assembler, and then extract the * #defines from the assembly-language output. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/sh/kernel/process_32.c +++ linux-riscv-6.17-6.17.0/arch/sh/kernel/process_32.c @@ -89,7 +89,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp = args->stack; unsigned long tls = args->tls; struct thread_info *ti = task_thread_info(p); --- linux-riscv-6.17-6.17.0.orig/arch/sparc/include/asm/elf_64.h +++ linux-riscv-6.17-6.17.0/arch/sparc/include/asm/elf_64.h @@ -58,6 +58,7 @@ #define R_SPARC_7 43 #define R_SPARC_5 44 #define R_SPARC_6 45 +#define R_SPARC_UA64 54 /* Bits present in AT_HWCAP, primarily for Sparc32. */ #define HWCAP_SPARC_FLUSH 0x00000001 --- linux-riscv-6.17-6.17.0.orig/arch/sparc/include/asm/io_64.h +++ linux-riscv-6.17-6.17.0/arch/sparc/include/asm/io_64.h @@ -250,19 +250,19 @@ #define insw insw #define insl insl -static inline void readsb(void __iomem *port, void *buf, unsigned long count) +static inline void readsb(const volatile void __iomem *port, void *buf, unsigned long count) { insb((unsigned long __force)port, buf, count); } #define readsb readsb -static inline void readsw(void __iomem *port, void *buf, unsigned long count) +static inline void readsw(const volatile void __iomem *port, void *buf, unsigned long count) { insw((unsigned long __force)port, buf, count); } #define readsw readsw -static inline void readsl(void __iomem *port, void *buf, unsigned long count) +static inline void readsl(const volatile void __iomem *port, void *buf, unsigned long count) { insl((unsigned long __force)port, buf, count); } --- linux-riscv-6.17-6.17.0.orig/arch/sparc/include/asm/video.h +++ linux-riscv-6.17-6.17.0/arch/sparc/include/asm/video.h @@ -19,8 +19,10 @@ #define pgprot_framebuffer pgprot_framebuffer #endif +#ifdef CONFIG_VIDEO bool video_is_primary_device(struct device *dev); #define video_is_primary_device video_is_primary_device +#endif static inline void fb_memcpy_fromio(void *to, const volatile void __iomem *from, size_t n) { --- linux-riscv-6.17-6.17.0.orig/arch/sparc/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/sparc/kernel/asm-offsets.c @@ -10,6 +10,7 @@ * * On sparc, thread_info data is static and TI_XXX offsets are computed by hand. */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/sparc/kernel/module.c +++ linux-riscv-6.17-6.17.0/arch/sparc/kernel/module.c @@ -87,6 +87,7 @@ break; #ifdef CONFIG_SPARC64 case R_SPARC_64: + case R_SPARC_UA64: location[0] = v >> 56; location[1] = v >> 48; location[2] = v >> 40; --- linux-riscv-6.17-6.17.0.orig/arch/sparc/kernel/of_device_32.c +++ linux-riscv-6.17-6.17.0/arch/sparc/kernel/of_device_32.c @@ -387,6 +387,7 @@ if (of_device_register(op)) { printk("%pOF: Could not register of device.\n", dp); + put_device(&op->dev); kfree(op); op = NULL; } --- linux-riscv-6.17-6.17.0.orig/arch/sparc/kernel/of_device_64.c +++ linux-riscv-6.17-6.17.0/arch/sparc/kernel/of_device_64.c @@ -677,6 +677,7 @@ if (of_device_register(op)) { printk("%pOF: Could not register of device.\n", dp); + put_device(&op->dev); kfree(op); op = NULL; } --- linux-riscv-6.17-6.17.0.orig/arch/sparc/kernel/process_32.c +++ linux-riscv-6.17-6.17.0/arch/sparc/kernel/process_32.c @@ -260,7 +260,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long sp = args->stack; unsigned long tls = args->tls; struct thread_info *ti = task_thread_info(p); --- linux-riscv-6.17-6.17.0.orig/arch/sparc/kernel/process_64.c +++ linux-riscv-6.17-6.17.0/arch/sparc/kernel/process_64.c @@ -567,7 +567,7 @@ */ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long sp = args->stack; unsigned long tls = args->tls; struct thread_info *t = task_thread_info(p); --- linux-riscv-6.17-6.17.0.orig/arch/sparc/lib/M7memcpy.S +++ linux-riscv-6.17-6.17.0/arch/sparc/lib/M7memcpy.S @@ -696,16 +696,16 @@ EX_LD_FP(LOAD(ldd, %o4+40, %f26), memcpy_retl_o2_plus_o5_plus_40) faligndata %f24, %f26, %f10 EX_ST_FP(STORE(std, %f6, %o0+24), memcpy_retl_o2_plus_o5_plus_40) - EX_LD_FP(LOAD(ldd, %o4+48, %f28), memcpy_retl_o2_plus_o5_plus_40) + EX_LD_FP(LOAD(ldd, %o4+48, %f28), memcpy_retl_o2_plus_o5_plus_32) faligndata %f26, %f28, %f12 - EX_ST_FP(STORE(std, %f8, %o0+32), memcpy_retl_o2_plus_o5_plus_40) + EX_ST_FP(STORE(std, %f8, %o0+32), memcpy_retl_o2_plus_o5_plus_32) add %o4, 64, %o4 - EX_LD_FP(LOAD(ldd, %o4-8, %f30), memcpy_retl_o2_plus_o5_plus_40) + EX_LD_FP(LOAD(ldd, %o4-8, %f30), memcpy_retl_o2_plus_o5_plus_24) faligndata %f28, %f30, %f14 - EX_ST_FP(STORE(std, %f10, %o0+40), memcpy_retl_o2_plus_o5_plus_40) - EX_ST_FP(STORE(std, %f12, %o0+48), memcpy_retl_o2_plus_o5_plus_40) + EX_ST_FP(STORE(std, %f10, %o0+40), memcpy_retl_o2_plus_o5_plus_24) + EX_ST_FP(STORE(std, %f12, %o0+48), memcpy_retl_o2_plus_o5_plus_16) add %o0, 64, %o0 - EX_ST_FP(STORE(std, %f14, %o0-8), memcpy_retl_o2_plus_o5_plus_40) + EX_ST_FP(STORE(std, %f14, %o0-8), memcpy_retl_o2_plus_o5_plus_8) fsrc2 %f30, %f14 bgu,pt %xcc, .Lunalign_sloop prefetch [%o4 + (8 * BLOCK_SIZE)], 20 @@ -728,7 +728,7 @@ add %o4, 8, %o4 faligndata %f0, %f2, %f16 subcc %o5, 8, %o5 - EX_ST_FP(STORE(std, %f16, %o0), memcpy_retl_o2_plus_o5) + EX_ST_FP(STORE(std, %f16, %o0), memcpy_retl_o2_plus_o5_plus_8) fsrc2 %f2, %f0 bgu,pt %xcc, .Lunalign_by8 add %o0, 8, %o0 @@ -772,7 +772,7 @@ subcc %o5, 0x20, %o5 EX_ST(STORE(stx, %o3, %o0 + 0x00), memcpy_retl_o2_plus_o5_plus_32) EX_ST(STORE(stx, %g2, %o0 + 0x08), memcpy_retl_o2_plus_o5_plus_24) - EX_ST(STORE(stx, %g7, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_24) + EX_ST(STORE(stx, %g7, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_16) EX_ST(STORE(stx, %o4, %o0 + 0x18), memcpy_retl_o2_plus_o5_plus_8) bne,pt %xcc, 1b add %o0, 0x20, %o0 @@ -804,12 +804,12 @@ brz,pt %o3, 2f sub %o2, %o3, %o2 -1: EX_LD(LOAD(ldub, %o1 + 0x00, %g2), memcpy_retl_o2_plus_g1) +1: EX_LD(LOAD(ldub, %o1 + 0x00, %g2), memcpy_retl_o2_plus_o3) add %o1, 1, %o1 subcc %o3, 1, %o3 add %o0, 1, %o0 bne,pt %xcc, 1b - EX_ST(STORE(stb, %g2, %o0 - 0x01), memcpy_retl_o2_plus_g1_plus_1) + EX_ST(STORE(stb, %g2, %o0 - 0x01), memcpy_retl_o2_plus_o3_plus_1) 2: and %o1, 0x7, %o3 brz,pn %o3, .Lmedium_noprefetch_cp --- linux-riscv-6.17-6.17.0.orig/arch/sparc/lib/Memcpy_utils.S +++ linux-riscv-6.17-6.17.0/arch/sparc/lib/Memcpy_utils.S @@ -137,6 +137,15 @@ ba,pt %xcc, __restore_asi add %o2, 8, %o0 ENDPROC(memcpy_retl_o2_plus_63_8) +ENTRY(memcpy_retl_o2_plus_o3) + ba,pt %xcc, __restore_asi + add %o2, %o3, %o0 +ENDPROC(memcpy_retl_o2_plus_o3) +ENTRY(memcpy_retl_o2_plus_o3_plus_1) + add %o3, 1, %o3 + ba,pt %xcc, __restore_asi + add %o2, %o3, %o0 +ENDPROC(memcpy_retl_o2_plus_o3_plus_1) ENTRY(memcpy_retl_o2_plus_o5) ba,pt %xcc, __restore_asi add %o2, %o5, %o0 --- linux-riscv-6.17-6.17.0.orig/arch/sparc/lib/NG4memcpy.S +++ linux-riscv-6.17-6.17.0/arch/sparc/lib/NG4memcpy.S @@ -281,7 +281,7 @@ subcc %o5, 0x20, %o5 EX_ST(STORE(stx, %g1, %o0 + 0x00), memcpy_retl_o2_plus_o5_plus_32) EX_ST(STORE(stx, %g2, %o0 + 0x08), memcpy_retl_o2_plus_o5_plus_24) - EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_24) + EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_16) EX_ST(STORE(stx, %o4, %o0 + 0x18), memcpy_retl_o2_plus_o5_plus_8) bne,pt %icc, 1b add %o0, 0x20, %o0 --- linux-riscv-6.17-6.17.0.orig/arch/sparc/lib/NGmemcpy.S +++ linux-riscv-6.17-6.17.0/arch/sparc/lib/NGmemcpy.S @@ -79,8 +79,8 @@ #ifndef EX_RETVAL #define EX_RETVAL(x) x __restore_asi: - ret wr %g0, ASI_AIUS, %asi + ret restore ENTRY(NG_ret_i2_plus_i4_plus_1) ba,pt %xcc, __restore_asi @@ -125,15 +125,16 @@ ba,pt %xcc, __restore_asi add %i2, %g1, %i0 ENDPROC(NG_ret_i2_plus_g1_minus_56) -ENTRY(NG_ret_i2_plus_i4) +ENTRY(NG_ret_i2_plus_i4_plus_16) + add %i4, 16, %i4 ba,pt %xcc, __restore_asi add %i2, %i4, %i0 -ENDPROC(NG_ret_i2_plus_i4) -ENTRY(NG_ret_i2_plus_i4_minus_8) - sub %i4, 8, %i4 +ENDPROC(NG_ret_i2_plus_i4_plus_16) +ENTRY(NG_ret_i2_plus_i4_plus_8) + add %i4, 8, %i4 ba,pt %xcc, __restore_asi add %i2, %i4, %i0 -ENDPROC(NG_ret_i2_plus_i4_minus_8) +ENDPROC(NG_ret_i2_plus_i4_plus_8) ENTRY(NG_ret_i2_plus_8) ba,pt %xcc, __restore_asi add %i2, 8, %i0 @@ -160,6 +161,12 @@ ba,pt %xcc, __restore_asi add %i2, %i4, %i0 ENDPROC(NG_ret_i2_and_7_plus_i4) +ENTRY(NG_ret_i2_and_7_plus_i4_plus_8) + and %i2, 7, %i2 + add %i4, 8, %i4 + ba,pt %xcc, __restore_asi + add %i2, %i4, %i0 +ENDPROC(NG_ret_i2_and_7_plus_i4) #endif .align 64 @@ -405,13 +412,13 @@ andn %i2, 0xf, %i4 and %i2, 0xf, %i2 1: subcc %i4, 0x10, %i4 - EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_i4) + EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_i4_plus_16) add %i1, 0x08, %i1 - EX_LD(LOAD(ldx, %i1, %g1), NG_ret_i2_plus_i4) + EX_LD(LOAD(ldx, %i1, %g1), NG_ret_i2_plus_i4_plus_16) sub %i1, 0x08, %i1 - EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_i4) + EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_i4_plus_16) add %i1, 0x8, %i1 - EX_ST(STORE(stx, %g1, %i1 + %i3), NG_ret_i2_plus_i4_minus_8) + EX_ST(STORE(stx, %g1, %i1 + %i3), NG_ret_i2_plus_i4_plus_8) bgu,pt %XCC, 1b add %i1, 0x8, %i1 73: andcc %i2, 0x8, %g0 @@ -468,7 +475,7 @@ subcc %i4, 0x8, %i4 srlx %g3, %i3, %i5 or %i5, %g2, %i5 - EX_ST(STORE(stx, %i5, %o0), NG_ret_i2_and_7_plus_i4) + EX_ST(STORE(stx, %i5, %o0), NG_ret_i2_and_7_plus_i4_plus_8) add %o0, 0x8, %o0 bgu,pt %icc, 1b sllx %g3, %g1, %g2 --- linux-riscv-6.17-6.17.0.orig/arch/sparc/lib/U1memcpy.S +++ linux-riscv-6.17-6.17.0/arch/sparc/lib/U1memcpy.S @@ -164,17 +164,18 @@ retl add %o0, %o2, %o0 ENDPROC(U1_gs_40_fp) -ENTRY(U1_g3_0_fp) - VISExitHalf - retl - add %g3, %o2, %o0 -ENDPROC(U1_g3_0_fp) ENTRY(U1_g3_8_fp) VISExitHalf add %g3, 8, %g3 retl add %g3, %o2, %o0 ENDPROC(U1_g3_8_fp) +ENTRY(U1_g3_16_fp) + VISExitHalf + add %g3, 16, %g3 + retl + add %g3, %o2, %o0 +ENDPROC(U1_g3_16_fp) ENTRY(U1_o2_0_fp) VISExitHalf retl @@ -547,18 +548,18 @@ 62: FINISH_VISCHUNK(o0, f44, f46) 63: UNEVEN_VISCHUNK_LAST(o0, f46, f0) -93: EX_LD_FP(LOAD(ldd, %o1, %f2), U1_g3_0_fp) +93: EX_LD_FP(LOAD(ldd, %o1, %f2), U1_g3_8_fp) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f0, %f2, %f8 - EX_ST_FP(STORE(std, %f8, %o0), U1_g3_8_fp) + EX_ST_FP(STORE(std, %f8, %o0), U1_g3_16_fp) bl,pn %xcc, 95f add %o0, 8, %o0 - EX_LD_FP(LOAD(ldd, %o1, %f0), U1_g3_0_fp) + EX_LD_FP(LOAD(ldd, %o1, %f0), U1_g3_8_fp) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f2, %f0, %f8 - EX_ST_FP(STORE(std, %f8, %o0), U1_g3_8_fp) + EX_ST_FP(STORE(std, %f8, %o0), U1_g3_16_fp) bge,pt %xcc, 93b add %o0, 8, %o0 --- linux-riscv-6.17-6.17.0.orig/arch/sparc/lib/U3memcpy.S +++ linux-riscv-6.17-6.17.0/arch/sparc/lib/U3memcpy.S @@ -267,6 +267,7 @@ faligndata %f10, %f12, %f26 EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0), U3_retl_o2) + and %o2, 0x3f, %o2 subcc GLOBAL_SPARE, 0x80, GLOBAL_SPARE add %o1, 0x40, %o1 bgu,pt %XCC, 1f @@ -336,7 +337,6 @@ * Also notice how this code is careful not to perform a * load past the end of the src buffer. */ - and %o2, 0x3f, %o2 andcc %o2, 0x38, %g2 be,pn %XCC, 2f subcc %g2, 0x8, %g2 --- linux-riscv-6.17-6.17.0.orig/arch/sparc/mm/hugetlbpage.c +++ linux-riscv-6.17-6.17.0/arch/sparc/mm/hugetlbpage.c @@ -22,6 +22,26 @@ static pte_t sun4u_hugepage_shift_to_tte(pte_t entry, unsigned int shift) { + unsigned long hugepage_size = _PAGE_SZ4MB_4U; + + pte_val(entry) = pte_val(entry) & ~_PAGE_SZALL_4U; + + switch (shift) { + case HPAGE_256MB_SHIFT: + hugepage_size = _PAGE_SZ256MB_4U; + pte_val(entry) |= _PAGE_PMD_HUGE; + break; + case HPAGE_SHIFT: + pte_val(entry) |= _PAGE_PMD_HUGE; + break; + case HPAGE_64K_SHIFT: + hugepage_size = _PAGE_SZ64K_4U; + break; + default: + WARN_ONCE(1, "unsupported hugepage shift=%u\n", shift); + } + + pte_val(entry) = pte_val(entry) | hugepage_size; return entry; } --- linux-riscv-6.17-6.17.0.orig/arch/um/Makefile +++ linux-riscv-6.17-6.17.0/arch/um/Makefile @@ -46,19 +46,17 @@ ARCH_INCLUDE += -I$(srctree)/$(HOST_DIR)/um/shared KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/um -# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so -# named - it's a common symbol in libpcap, so we get a binary which crashes. -# -# Same things for in6addr_loopback and mktime - found in libc. For these two we -# only get link-time error, luckily. +# -Dstrrchr=kernel_strrchr (as well as the various in6addr symbols) prevents +# anything from referencing +# libc symbols with the same name, which can cause a linker error. # # -Dlongjmp=kernel_longjmp prevents anything from referencing the libpthread.a # embedded copy of longjmp, same thing for setjmp. # -# These apply to USER_CFLAGS to. +# These apply to USER_CFLAGS too. KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ \ - $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \ + $(ARCH_INCLUDE) $(MODE_INCLUDE) \ -Dlongjmp=kernel_longjmp -Dsetjmp=kernel_setjmp \ -Din6addr_loopback=kernel_in6addr_loopback \ -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr \ --- linux-riscv-6.17-6.17.0.orig/arch/um/drivers/ssl.c +++ linux-riscv-6.17-6.17.0/arch/um/drivers/ssl.c @@ -199,4 +199,7 @@ return 1; } __setup("ssl-non-raw", ssl_non_raw_setup); -__channel_help(ssl_non_raw_setup, "set serial lines to non-raw mode"); +__uml_help(ssl_non_raw_setup, +"ssl-non-raw\n" +" Set serial lines to non-raw mode.\n\n" +); --- linux-riscv-6.17-6.17.0.orig/arch/um/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/um/kernel/asm-offsets.c @@ -1 +1,3 @@ +#define COMPILE_OFFSETS + #include --- linux-riscv-6.17-6.17.0.orig/arch/um/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/um/kernel/process.c @@ -143,7 +143,7 @@ int copy_thread(struct task_struct * p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long sp = args->stack; unsigned long tls = args->tls; void (*handler)(void); --- linux-riscv-6.17-6.17.0.orig/arch/x86/Kconfig +++ linux-riscv-6.17-6.17.0/arch/x86/Kconfig @@ -1896,7 +1896,6 @@ depends on X86_X2APIC select ARCH_KEEP_MEMBLOCK depends on CONTIG_ALLOC - depends on !KEXEC_CORE depends on X86_MCE help Intel Trust Domain Extensions (TDX) protects guest VMs from malicious --- linux-riscv-6.17-6.17.0.orig/arch/x86/Makefile +++ linux-riscv-6.17-6.17.0/arch/x86/Makefile @@ -74,7 +74,7 @@ # # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383 # -KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx +KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -mno-sse4a KBUILD_RUSTFLAGS += --target=$(objtree)/scripts/target.json KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-avx,-avx2 --- linux-riscv-6.17-6.17.0.orig/arch/x86/boot/compressed/pgtable_64.c +++ linux-riscv-6.17-6.17.0/arch/x86/boot/compressed/pgtable_64.c @@ -3,6 +3,7 @@ #include #include #include +#include #include #include "../string.h" #include "efi.h" @@ -168,9 +169,10 @@ * For 4- to 5-level paging transition, set up current CR3 as * the first and the only entry in a new top-level page table. */ - *trampoline_32bit = __native_read_cr3() | _PAGE_TABLE_NOENC; + *trampoline_32bit = native_read_cr3_pa() | _PAGE_TABLE_NOENC; } else { - unsigned long src; + u64 *new_cr3; + pgd_t *pgdp; /* * For 5- to 4-level paging transition, copy page table pointed @@ -180,8 +182,9 @@ * We cannot just point to the page table from trampoline as it * may be above 4G. */ - src = *(unsigned long *)__native_read_cr3() & PAGE_MASK; - memcpy(trampoline_32bit, (void *)src, PAGE_SIZE); + pgdp = (pgd_t *)native_read_cr3_pa(); + new_cr3 = (u64 *)(native_pgd_val(pgdp[0]) & PTE_PFN_MASK); + memcpy(trampoline_32bit, new_cr3, PAGE_SIZE); } toggle_la57(trampoline_32bit); --- linux-riscv-6.17-6.17.0.orig/arch/x86/entry/entry_64_fred.S +++ linux-riscv-6.17-6.17.0/arch/x86/entry/entry_64_fred.S @@ -16,7 +16,7 @@ .macro FRED_ENTER UNWIND_HINT_END_OF_STACK - ENDBR + ANNOTATE_NOENDBR PUSH_AND_CLEAR_REGS movq %rsp, %rdi /* %rdi -> pt_regs */ .endm --- linux-riscv-6.17-6.17.0.orig/arch/x86/entry/vsyscall/vsyscall_64.c +++ linux-riscv-6.17-6.17.0/arch/x86/entry/vsyscall/vsyscall_64.c @@ -124,7 +124,12 @@ if ((error_code & (X86_PF_WRITE | X86_PF_USER)) != X86_PF_USER) return false; - if (!(error_code & X86_PF_INSTR)) { + /* + * Assume that faults at regs->ip are because of an + * instruction fetch. Return early and avoid + * emulation for faults during data accesses: + */ + if (address != regs->ip) { /* Failed vsyscall read */ if (vsyscall_mode == EMULATE) return false; @@ -137,12 +142,18 @@ } /* + * X86_PF_INSTR is only set when NX is supported. When + * available, use it to double-check that the emulation code + * is only being used for instruction fetches: + */ + if (cpu_feature_enabled(X86_FEATURE_NX)) + WARN_ON_ONCE(!(error_code & X86_PF_INSTR)); + + /* * No point in checking CS -- the only way to get here is a user mode * trap to a high address, which means that we're in 64-bit user code. */ - WARN_ON_ONCE(address != regs->ip); - if (vsyscall_mode == NONE) { warn_bad_vsyscall(KERN_INFO, regs, "vsyscall attempted with vsyscall=none"); --- linux-riscv-6.17-6.17.0.orig/arch/x86/events/core.c +++ linux-riscv-6.17-6.17.0/arch/x86/events/core.c @@ -1344,6 +1344,7 @@ hwc->state |= PERF_HES_ARCH; x86_pmu_stop(event, PERF_EF_UPDATE); + cpuc->events[hwc->idx] = NULL; } /* @@ -1365,6 +1366,7 @@ * if cpuc->enabled = 0, then no wrmsr as * per x86_pmu_enable_event() */ + cpuc->events[hwc->idx] = event; x86_pmu_start(event, PERF_EF_RELOAD); } cpuc->n_added = 0; @@ -1531,7 +1533,6 @@ event->hw.state = 0; - cpuc->events[idx] = event; __set_bit(idx, cpuc->active_mask); static_call(x86_pmu_enable)(event); perf_event_update_userpage(event); @@ -1610,7 +1611,6 @@ if (test_bit(hwc->idx, cpuc->active_mask)) { static_call(x86_pmu_disable)(event); __clear_bit(hwc->idx, cpuc->active_mask); - cpuc->events[hwc->idx] = NULL; WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED); hwc->state |= PERF_HES_STOPPED; } @@ -1648,6 +1648,7 @@ * Not a TXN, therefore cleanup properly. */ x86_pmu_stop(event, PERF_EF_UPDATE); + cpuc->events[event->hw.idx] = NULL; for (i = 0; i < cpuc->n_events; i++) { if (event == cpuc->event_list[i]) @@ -2787,13 +2788,13 @@ return; } - if (perf_callchain_store(entry, regs->ip)) - return; - - if (perf_hw_regs(regs)) + if (perf_hw_regs(regs)) { + if (perf_callchain_store(entry, regs->ip)) + return; unwind_start(&state, current, regs, NULL); - else + } else { unwind_start(&state, current, NULL, (void *)regs->sp); + } for (; !unwind_done(&state); unwind_next_frame(&state)) { addr = unwind_get_return_address(&state); --- linux-riscv-6.17-6.17.0.orig/arch/x86/events/intel/bts.c +++ linux-riscv-6.17-6.17.0/arch/x86/events/intel/bts.c @@ -643,4 +643,4 @@ return perf_pmu_register(&bts_pmu, "intel_bts", -1); } -arch_initcall(bts_init); +early_initcall(bts_init); --- linux-riscv-6.17-6.17.0.orig/arch/x86/events/intel/core.c +++ linux-riscv-6.17-6.17.0/arch/x86/events/intel/core.c @@ -2845,8 +2845,8 @@ { struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; - u64 mask, bits = 0; int idx = hwc->idx; + u64 bits = 0; if (is_topdown_idx(idx)) { struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); @@ -2885,14 +2885,10 @@ idx -= INTEL_PMC_IDX_FIXED; bits = intel_fixed_bits_by_idx(idx, bits); - mask = intel_fixed_bits_by_idx(idx, INTEL_FIXED_BITS_MASK); - - if (x86_pmu.intel_cap.pebs_baseline && event->attr.precise_ip) { + if (x86_pmu.intel_cap.pebs_baseline && event->attr.precise_ip) bits |= intel_fixed_bits_by_idx(idx, ICL_FIXED_0_ADAPTIVE); - mask |= intel_fixed_bits_by_idx(idx, ICL_FIXED_0_ADAPTIVE); - } - cpuc->fixed_ctrl_val &= ~mask; + cpuc->fixed_ctrl_val &= ~intel_fixed_bits_by_idx(idx, INTEL_FIXED_BITS_MASK); cpuc->fixed_ctrl_val |= bits; } @@ -2997,7 +2993,8 @@ if (event->group_leader != leader->group_leader) break; for_each_set_bit(idx, (unsigned long *)&event->attr.config2, X86_PMC_IDX_MAX) { - if (WARN_ON_ONCE(i + idx > cpuc->n_events)) + if (i + idx >= cpuc->n_events || + !is_acr_event_group(cpuc->event_list[i + idx])) return; __set_bit(cpuc->assign[i + idx], (unsigned long *)&event->hw.config1); } @@ -3252,6 +3249,9 @@ if (!test_bit(bit, cpuc->active_mask)) continue; + /* Event may have already been cleared: */ + if (!event) + continue; /* * There may be unprocessed PEBS records in the PEBS buffer, @@ -4032,7 +4032,9 @@ if (!event->attr.exclude_kernel) flags &= ~PERF_SAMPLE_REGS_USER; if (event->attr.sample_regs_user & ~PEBS_GP_REGS) - flags &= ~(PERF_SAMPLE_REGS_USER | PERF_SAMPLE_REGS_INTR); + flags &= ~PERF_SAMPLE_REGS_USER; + if (event->attr.sample_regs_intr & ~PEBS_GP_REGS) + flags &= ~PERF_SAMPLE_REGS_INTR; return flags; } --- linux-riscv-6.17-6.17.0.orig/arch/x86/events/intel/cstate.c +++ linux-riscv-6.17-6.17.0/arch/x86/events/intel/cstate.c @@ -70,7 +70,7 @@ * perf code: 0x01 * Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,KNL, * GLM,CNL,KBL,CML,ICL,TGL,TNT,RKL, - * ADL,RPL,MTL,ARL,LNL + * ADL,RPL,MTL,ARL * Scope: Package (physical package) * MSR_PKG_C6_RESIDENCY: Package C6 Residency Counter. * perf code: 0x02 @@ -522,7 +522,6 @@ BIT(PERF_CSTATE_CORE_C7_RES), .pkg_events = BIT(PERF_CSTATE_PKG_C2_RES) | - BIT(PERF_CSTATE_PKG_C3_RES) | BIT(PERF_CSTATE_PKG_C6_RES) | BIT(PERF_CSTATE_PKG_C10_RES), }; --- linux-riscv-6.17-6.17.0.orig/arch/x86/events/intel/ds.c +++ linux-riscv-6.17-6.17.0/arch/x86/events/intel/ds.c @@ -317,7 +317,8 @@ { u64 val; - WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big); + WARN_ON_ONCE(is_hybrid() && + hybrid_pmu(event->pmu)->pmu_type == hybrid_big); dse &= PERF_PEBS_DATA_SOURCE_GRT_MASK; val = hybrid_var(event->pmu, pebs_data_source)[dse]; --- linux-riscv-6.17-6.17.0.orig/arch/x86/events/intel/uncore.c +++ linux-riscv-6.17-6.17.0/arch/x86/events/intel/uncore.c @@ -1895,6 +1895,7 @@ X86_MATCH_VFM(INTEL_ARROWLAKE_H, &mtl_uncore_init), X86_MATCH_VFM(INTEL_LUNARLAKE_M, &lnl_uncore_init), X86_MATCH_VFM(INTEL_PANTHERLAKE_L, &ptl_uncore_init), + X86_MATCH_VFM(INTEL_WILDCATLAKE_L, &ptl_uncore_init), X86_MATCH_VFM(INTEL_SAPPHIRERAPIDS_X, &spr_uncore_init), X86_MATCH_VFM(INTEL_EMERALDRAPIDS_X, &spr_uncore_init), X86_MATCH_VFM(INTEL_GRANITERAPIDS_X, &gnr_uncore_init), --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/amd/node.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/amd/node.h @@ -23,7 +23,6 @@ #define AMD_NODE0_PCI_SLOT 0x18 struct pci_dev *amd_node_get_func(u16 node, u8 func); -struct pci_dev *amd_node_get_root(u16 node); static inline u16 amd_num_nodes(void) { --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/fpu/sched.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/fpu/sched.h @@ -11,7 +11,7 @@ extern void save_fpregs_to_fpstate(struct fpu *fpu); extern void fpu__drop(struct task_struct *tsk); -extern int fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal, +extern int fpu_clone(struct task_struct *dst, u64 clone_flags, bool minimal, unsigned long shstk_addr); extern void fpu_flush_thread(void); --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/kexec.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/kexec.h @@ -13,6 +13,15 @@ # define KEXEC_DEBUG_EXC_HANDLER_SIZE 6 /* PUSHI, PUSHI, 2-byte JMP */ #endif +#ifdef CONFIG_X86_64 + +#include + +#define RELOC_KERNEL_PRESERVE_CONTEXT BIT(0) +#define RELOC_KERNEL_CACHE_INCOHERENT BIT(1) + +#endif + # define KEXEC_CONTROL_PAGE_SIZE 4096 # define KEXEC_CONTROL_CODE_MAX_SIZE 2048 @@ -121,8 +130,7 @@ relocate_kernel_fn(unsigned long indirection_page, unsigned long pa_control_page, unsigned long start_address, - unsigned int preserve_context, - unsigned int host_mem_enc_active); + unsigned int flags); #endif extern relocate_kernel_fn relocate_kernel; #define ARCH_HAS_KIMAGE_ARCH --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/kvm_host.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/kvm_host.h @@ -926,6 +926,7 @@ bool emulate_regs_need_sync_from_vcpu; int (*complete_userspace_io)(struct kvm_vcpu *vcpu); unsigned long cui_linear_rip; + int cui_rdmsr_imm_reg; gpa_t time; s8 pvclock_tsc_shift; @@ -2122,6 +2123,11 @@ * the gfn, i.e. retrying the instruction will hit a * !PRESENT fault, which results in a new shadow page * and sends KVM back to square one. + * + * EMULTYPE_SKIP_SOFT_INT - Set in combination with EMULTYPE_SKIP to only skip + * an instruction if it could generate a given software + * interrupt, which must be encoded via + * EMULTYPE_SET_SOFT_INT_VECTOR(). */ #define EMULTYPE_NO_DECODE (1 << 0) #define EMULTYPE_TRAP_UD (1 << 1) @@ -2132,6 +2138,10 @@ #define EMULTYPE_PF (1 << 6) #define EMULTYPE_COMPLETE_USER_EXIT (1 << 7) #define EMULTYPE_WRITE_PF_TO_SP (1 << 8) +#define EMULTYPE_SKIP_SOFT_INT (1 << 9) + +#define EMULTYPE_SET_SOFT_INT_VECTOR(v) ((u32)((v) & 0xff) << 16) +#define EMULTYPE_GET_SOFT_INT_VECTOR(e) (((e) >> 16) & 0xff) static inline bool kvm_can_emulate_event_vectoring(int emul_type) { @@ -2155,7 +2165,9 @@ int kvm_get_msr(struct kvm_vcpu *vcpu, u32 index, u64 *data); int kvm_set_msr(struct kvm_vcpu *vcpu, u32 index, u64 data); int kvm_emulate_rdmsr(struct kvm_vcpu *vcpu); +int kvm_emulate_rdmsr_imm(struct kvm_vcpu *vcpu, u32 msr, int reg); int kvm_emulate_wrmsr(struct kvm_vcpu *vcpu); +int kvm_emulate_wrmsr_imm(struct kvm_vcpu *vcpu, u32 msr, int reg); int kvm_emulate_as_nop(struct kvm_vcpu *vcpu); int kvm_emulate_invd(struct kvm_vcpu *vcpu); int kvm_emulate_mwait(struct kvm_vcpu *vcpu); @@ -2356,6 +2368,7 @@ int kvm_find_user_return_msr(u32 msr); int kvm_set_user_return_msr(unsigned index, u64 val, u64 mask); void kvm_user_return_msr_update_cache(unsigned int index, u64 val); +u64 kvm_get_user_return_msr(unsigned int slot); static inline bool kvm_is_supported_user_return_msr(u32 msr) { --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/msr-index.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/msr-index.h @@ -733,6 +733,7 @@ #define MSR_AMD64_PERF_CNTR_GLOBAL_STATUS 0xc0000300 #define MSR_AMD64_PERF_CNTR_GLOBAL_CTL 0xc0000301 #define MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_CLR 0xc0000302 +#define MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_SET 0xc0000303 /* AMD Hardware Feedback Support MSRs */ #define MSR_AMD_WORKLOAD_CLASS_CONFIG 0xc0000500 --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/pci-direct.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/pci-direct.h @@ -10,9 +10,11 @@ extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset); extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset); extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset); +extern u32 pci_early_find_cap(int bus, int slot, int func, int cap); extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val); extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val); extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val); +extern unsigned int pci_early_clear_msi; extern int early_pci_allowed(void); #endif /* _ASM_X86_PCI_DIRECT_H */ --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/perf_event.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/perf_event.h @@ -35,7 +35,6 @@ #define ARCH_PERFMON_EVENTSEL_EQ (1ULL << 36) #define ARCH_PERFMON_EVENTSEL_UMASK2 (0xFFULL << 40) -#define INTEL_FIXED_BITS_MASK 0xFULL #define INTEL_FIXED_BITS_STRIDE 4 #define INTEL_FIXED_0_KERNEL (1ULL << 0) #define INTEL_FIXED_0_USER (1ULL << 1) @@ -48,6 +47,11 @@ #define ICL_EVENTSEL_ADAPTIVE (1ULL << 34) #define ICL_FIXED_0_ADAPTIVE (1ULL << 32) +#define INTEL_FIXED_BITS_MASK \ + (INTEL_FIXED_0_KERNEL | INTEL_FIXED_0_USER | \ + INTEL_FIXED_0_ANYTHREAD | INTEL_FIXED_0_ENABLE_PMI | \ + ICL_FIXED_0_ADAPTIVE) + #define intel_fixed_bits_by_idx(_idx, _bits) \ ((_bits) << ((_idx) * INTEL_FIXED_BITS_STRIDE)) --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/processor.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/processor.h @@ -731,6 +731,8 @@ void microcode_check(struct cpuinfo_x86 *prev_info); void store_cpu_caps(struct cpuinfo_x86 *info); +DECLARE_PER_CPU(bool, cache_state_incoherent); + enum l1tf_mitigations { L1TF_MITIGATION_OFF, L1TF_MITIGATION_AUTO, --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/runtime-const.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/runtime-const.h @@ -2,6 +2,10 @@ #ifndef _ASM_RUNTIME_CONST_H #define _ASM_RUNTIME_CONST_H +#ifdef MODULE + #error "Cannot use runtime-const infrastructure from modules" +#endif + #ifdef __ASSEMBLY__ .macro RUNTIME_CONST_PTR sym reg --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/segment.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/segment.h @@ -244,7 +244,7 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node) { - unsigned int p; + unsigned long p; /* * Load CPU and node number from the GDT. LSL is faster than RDTSCP @@ -254,10 +254,10 @@ * * If RDPID is available, use it. */ - alternative_io ("lsl %[seg],%[p]", - ".byte 0xf3,0x0f,0xc7,0xf8", /* RDPID %eax/rax */ + alternative_io ("lsl %[seg],%k[p]", + "rdpid %[p]", X86_FEATURE_RDPID, - [p] "=a" (p), [seg] "r" (__CPUNODE_SEG)); + [p] "=r" (p), [seg] "r" (__CPUNODE_SEG)); if (cpu) *cpu = (p & VDSO_CPUNODE_MASK); --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/shstk.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/shstk.h @@ -16,7 +16,7 @@ long shstk_prctl(struct task_struct *task, int option, unsigned long arg2); void reset_thread_features(void); -unsigned long shstk_alloc_thread_stack(struct task_struct *p, unsigned long clone_flags, +unsigned long shstk_alloc_thread_stack(struct task_struct *p, u64 clone_flags, unsigned long stack_size); void shstk_free(struct task_struct *p); int setup_signal_shadow_stack(struct ksignal *ksig); @@ -28,7 +28,7 @@ unsigned long arg2) { return -EINVAL; } static inline void reset_thread_features(void) {} static inline unsigned long shstk_alloc_thread_stack(struct task_struct *p, - unsigned long clone_flags, + u64 clone_flags, unsigned long stack_size) { return 0; } static inline void shstk_free(struct task_struct *p) {} static inline int setup_signal_shadow_stack(struct ksignal *ksig) { return 0; } --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/tdx.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/tdx.h @@ -102,10 +102,31 @@ u64 __seamcall_saved_ret(u64 fn, struct tdx_module_args *args); void tdx_init(void); +#include #include +#include typedef u64 (*sc_func_t)(u64 fn, struct tdx_module_args *args); +static __always_inline u64 __seamcall_dirty_cache(sc_func_t func, u64 fn, + struct tdx_module_args *args) +{ + lockdep_assert_preemption_disabled(); + + /* + * SEAMCALLs are made to the TDX module and can generate dirty + * cachelines of TDX private memory. Mark cache state incoherent + * so that the cache can be flushed during kexec. + * + * This needs to be done before actually making the SEAMCALL, + * because kexec-ing CPU could send NMI to stop remote CPUs, + * in which case even disabling IRQ won't help here. + */ + this_cpu_write(cache_state_incoherent, true); + + return func(fn, args); +} + static __always_inline u64 sc_retry(sc_func_t func, u64 fn, struct tdx_module_args *args) { @@ -113,7 +134,9 @@ u64 ret; do { - ret = func(fn, args); + preempt_disable(); + ret = __seamcall_dirty_cache(func, fn, args); + preempt_enable(); } while (ret == TDX_RND_NO_ENTROPY && --retry); return ret; @@ -146,6 +169,8 @@ struct tdx_vp { /* TDVP root page */ struct page *tdvpr_page; + /* precalculated page_to_phys(tdvpr_page) for use in noinstr code */ + phys_addr_t tdvpr_pa; /* TD vCPU control structure: */ struct page **tdcx_pages; @@ -203,5 +228,11 @@ static inline const struct tdx_sys_info *tdx_get_sysinfo(void) { return NULL; } #endif /* CONFIG_INTEL_TDX_HOST */ +#ifdef CONFIG_KEXEC_CORE +void tdx_cpu_flush_cache_for_kexec(void); +#else +static inline void tdx_cpu_flush_cache_for_kexec(void) { } +#endif + #endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_TDX_H */ --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/uaccess_64.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/uaccess_64.h @@ -12,12 +12,12 @@ #include #include #include -#include -/* - * Virtual variable: there's no actual backing store for this, - * it can purely be used as 'runtime_const_ptr(USER_PTR_MAX)' - */ +#ifdef MODULE + #define runtime_const_ptr(sym) (sym) +#else + #include +#endif extern unsigned long USER_PTR_MAX; #ifdef CONFIG_ADDRESS_MASKING --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/asm/video.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/asm/video.h @@ -13,8 +13,10 @@ unsigned long offset); #define pgprot_framebuffer pgprot_framebuffer +#ifdef CONFIG_VIDEO bool video_is_primary_device(struct device *dev); #define video_is_primary_device video_is_primary_device +#endif #include --- linux-riscv-6.17-6.17.0.orig/arch/x86/include/uapi/asm/vmx.h +++ linux-riscv-6.17-6.17.0/arch/x86/include/uapi/asm/vmx.h @@ -93,7 +93,10 @@ #define EXIT_REASON_TPAUSE 68 #define EXIT_REASON_BUS_LOCK 74 #define EXIT_REASON_NOTIFY 75 +#define EXIT_REASON_SEAMCALL 76 #define EXIT_REASON_TDCALL 77 +#define EXIT_REASON_MSR_READ_IMM 84 +#define EXIT_REASON_MSR_WRITE_IMM 85 #define VMX_EXIT_REASONS \ { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \ @@ -158,7 +161,9 @@ { EXIT_REASON_TPAUSE, "TPAUSE" }, \ { EXIT_REASON_BUS_LOCK, "BUS_LOCK" }, \ { EXIT_REASON_NOTIFY, "NOTIFY" }, \ - { EXIT_REASON_TDCALL, "TDCALL" } + { EXIT_REASON_TDCALL, "TDCALL" }, \ + { EXIT_REASON_MSR_READ_IMM, "MSR_READ_IMM" }, \ + { EXIT_REASON_MSR_WRITE_IMM, "MSR_WRITE_IMM" } #define VMX_EXIT_REASON_FLAGS \ { VMX_EXIT_REASONS_FAILED_VMENTRY, "FAILED_VMENTRY" } --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/acpi/cppc.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/acpi/cppc.c @@ -196,7 +196,7 @@ break; } - for_each_present_cpu(cpu) { + for_each_online_cpu(cpu) { u32 tmp; int ret; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/amd_node.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/amd_node.c @@ -34,62 +34,6 @@ return pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(AMD_NODE0_PCI_SLOT + node, func)); } -#define DF_BLK_INST_CNT 0x040 -#define DF_CFG_ADDR_CNTL_LEGACY 0x084 -#define DF_CFG_ADDR_CNTL_DF4 0xC04 - -#define DF_MAJOR_REVISION GENMASK(27, 24) - -static u16 get_cfg_addr_cntl_offset(struct pci_dev *df_f0) -{ - u32 reg; - - /* - * Revision fields added for DF4 and later. - * - * Major revision of '0' is found pre-DF4. Field is Read-as-Zero. - */ - if (pci_read_config_dword(df_f0, DF_BLK_INST_CNT, ®)) - return 0; - - if (reg & DF_MAJOR_REVISION) - return DF_CFG_ADDR_CNTL_DF4; - - return DF_CFG_ADDR_CNTL_LEGACY; -} - -struct pci_dev *amd_node_get_root(u16 node) -{ - struct pci_dev *root; - u16 cntl_off; - u8 bus; - - if (!cpu_feature_enabled(X86_FEATURE_ZEN)) - return NULL; - - /* - * D18F0xXXX [Config Address Control] (DF::CfgAddressCntl) - * Bits [7:0] (SecBusNum) holds the bus number of the root device for - * this Data Fabric instance. The segment, device, and function will be 0. - */ - struct pci_dev *df_f0 __free(pci_dev_put) = amd_node_get_func(node, 0); - if (!df_f0) - return NULL; - - cntl_off = get_cfg_addr_cntl_offset(df_f0); - if (!cntl_off) - return NULL; - - if (pci_read_config_byte(df_f0, cntl_off, &bus)) - return NULL; - - /* Grab the pointer for the actual root device instance. */ - root = pci_get_domain_bus_and_slot(0, bus, 0); - - pci_dbg(root, "is root for AMD node %u\n", node); - return root; -} - static struct pci_dev **amd_roots; /* Protect the PCI config register pairs used for SMN. */ @@ -274,51 +218,21 @@ DEFINE_SHOW_STORE_ATTRIBUTE(smn_address); DEFINE_SHOW_STORE_ATTRIBUTE(smn_value); -static int amd_cache_roots(void) +static struct pci_dev *get_next_root(struct pci_dev *root) { - u16 node, num_nodes = amd_num_nodes(); - - amd_roots = kcalloc(num_nodes, sizeof(*amd_roots), GFP_KERNEL); - if (!amd_roots) - return -ENOMEM; - - for (node = 0; node < num_nodes; node++) - amd_roots[node] = amd_node_get_root(node); - - return 0; -} - -static int reserve_root_config_spaces(void) -{ - struct pci_dev *root = NULL; - struct pci_bus *bus = NULL; - - while ((bus = pci_find_next_bus(bus))) { - /* Root device is Device 0 Function 0 on each Primary Bus. */ - root = pci_get_slot(bus, 0); - if (!root) + while ((root = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, root))) { + /* Root device is Device 0 Function 0. */ + if (root->devfn) continue; if (root->vendor != PCI_VENDOR_ID_AMD && root->vendor != PCI_VENDOR_ID_HYGON) continue; - pci_dbg(root, "Reserving PCI config space\n"); - - /* - * There are a few SMN index/data pairs and other registers - * that shouldn't be accessed by user space. - * So reserve the entire PCI config space for simplicity rather - * than covering specific registers piecemeal. - */ - if (!pci_request_config_region_exclusive(root, 0, PCI_CFG_SPACE_SIZE, NULL)) { - pci_err(root, "Failed to reserve config space\n"); - return -EEXIST; - } + break; } - smn_exclusive = true; - return 0; + return root; } static bool enable_dfs; @@ -332,7 +246,8 @@ static int __init amd_smn_init(void) { - int err; + u16 count, num_roots, roots_per_node, node, num_nodes; + struct pci_dev *root; if (!cpu_feature_enabled(X86_FEATURE_ZEN)) return 0; @@ -342,13 +257,48 @@ if (amd_roots) return 0; - err = amd_cache_roots(); - if (err) - return err; + num_roots = 0; + root = NULL; + while ((root = get_next_root(root))) { + pci_dbg(root, "Reserving PCI config space\n"); - err = reserve_root_config_spaces(); - if (err) - return err; + /* + * There are a few SMN index/data pairs and other registers + * that shouldn't be accessed by user space. So reserve the + * entire PCI config space for simplicity rather than covering + * specific registers piecemeal. + */ + if (!pci_request_config_region_exclusive(root, 0, PCI_CFG_SPACE_SIZE, NULL)) { + pci_err(root, "Failed to reserve config space\n"); + return -EEXIST; + } + + num_roots++; + } + + pr_debug("Found %d AMD root devices\n", num_roots); + + if (!num_roots) + return -ENODEV; + + num_nodes = amd_num_nodes(); + amd_roots = kcalloc(num_nodes, sizeof(*amd_roots), GFP_KERNEL); + if (!amd_roots) + return -ENOMEM; + + roots_per_node = num_roots / num_nodes; + + count = 0; + node = 0; + root = NULL; + while (node < num_nodes && (root = get_next_root(root))) { + /* Use one root for each node and skip the rest. */ + if (count++ % roots_per_node) + continue; + + pci_dbg(root, "is root for AMD node %u\n", node); + amd_roots[node++] = root; + } if (enable_dfs) { debugfs_dir = debugfs_create_dir("amd_smn", arch_debugfs_dir); @@ -358,6 +308,8 @@ debugfs_create_file("value", 0600, debugfs_dir, NULL, &smn_value_fops); } + smn_exclusive = true; + return 0; } --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/aperture_64.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/aperture_64.c @@ -136,32 +136,6 @@ } -/* Find a PCI capability */ -static u32 __init find_cap(int bus, int slot, int func, int cap) -{ - int bytes; - u8 pos; - - if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & - PCI_STATUS_CAP_LIST)) - return 0; - - pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); - for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { - u8 id; - - pos &= ~3; - id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); - if (id == 0xff) - break; - if (id == cap) - return pos; - pos = read_pci_config_byte(bus, slot, func, - pos+PCI_CAP_LIST_NEXT); - } - return 0; -} - /* Read a standard AGPv3 bridge header */ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { @@ -250,8 +224,8 @@ case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(bus, slot, func, - PCI_CAP_ID_AGP); + cap = pci_early_find_cap(bus, slot, + func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/cpu/amd.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/cpu/amd.c @@ -516,7 +516,7 @@ setup_force_cpu_cap(X86_FEATURE_ZEN5); break; case 0x50 ... 0x5f: - case 0x90 ... 0xaf: + case 0x80 ... 0xaf: case 0xc0 ... 0xcf: setup_force_cpu_cap(X86_FEATURE_ZEN6); break; @@ -546,6 +546,23 @@ u64 msr; /* + * Mark using WBINVD is needed during kexec on processors that + * support SME. This provides support for performing a successful + * kexec when going from SME inactive to SME active (or vice-versa). + * + * The cache must be cleared so that if there are entries with the + * same physical address, both with and without the encryption bit, + * they don't race each other when flushed and potentially end up + * with the wrong entry being committed to memory. + * + * Test the CPUID bit directly because with mem_encrypt=off the + * BSP will clear the X86_FEATURE_SME bit and the APs will not + * see it set after that. + */ + if (c->extended_cpuid_level >= 0x8000001f && (cpuid_eax(0x8000001f) & BIT(0))) + __this_cpu_write(cache_state_incoherent, true); + + /* * BIOS support is required for SME and SEV. * For SME: If BIOS has enabled SME then adjust x86_phys_bits by * the SME physical address space reduction value. @@ -1018,8 +1035,26 @@ } } +static const struct x86_cpu_id zen5_rdseed_microcode[] = { + ZEN_MODEL_STEP_UCODE(0x1a, 0x02, 0x1, 0x0b00215a), + ZEN_MODEL_STEP_UCODE(0x1a, 0x08, 0x1, 0x0b008121), + ZEN_MODEL_STEP_UCODE(0x1a, 0x11, 0x0, 0x0b101054), + ZEN_MODEL_STEP_UCODE(0x1a, 0x24, 0x0, 0x0b204037), + ZEN_MODEL_STEP_UCODE(0x1a, 0x44, 0x0, 0x0b404035), + ZEN_MODEL_STEP_UCODE(0x1a, 0x44, 0x1, 0x0b404108), + ZEN_MODEL_STEP_UCODE(0x1a, 0x60, 0x0, 0x0b600037), + ZEN_MODEL_STEP_UCODE(0x1a, 0x68, 0x0, 0x0b608038), + ZEN_MODEL_STEP_UCODE(0x1a, 0x70, 0x0, 0x0b700037), + {}, +}; + static void init_amd_zen5(struct cpuinfo_x86 *c) { + if (!x86_match_min_microcode_rev(zen5_rdseed_microcode)) { + clear_cpu_cap(c, X86_FEATURE_RDSEED); + msr_clear_bit(MSR_AMD64_CPUID_FN_7, 18); + pr_emerg_once("RDSEED32 is broken. Disabling the corresponding CPUID bit.\n"); + } } static void init_amd(struct cpuinfo_x86 *c) @@ -1338,11 +1373,23 @@ return 0; value = ioread32(addr); - iounmap(addr); /* Value with "all bits set" is an error response and should be ignored. */ - if (value == U32_MAX) + if (value == U32_MAX) { + iounmap(addr); return 0; + } + + /* + * Clear all reason bits so they won't be retained if the next reset + * does not update the register. Besides, some bits are never cleared by + * hardware so it's software's responsibility to clear them. + * + * Writing the value back effectively clears all reason bits as they are + * write-1-to-clear. + */ + iowrite32(value, addr); + iounmap(addr); for (i = 0; i < ARRAY_SIZE(s5_reset_reason_txt); i++) { if (!(value & BIT(i))) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/cpu/bugs.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/cpu/bugs.c @@ -434,6 +434,9 @@ case X86_BUG_SPEC_STORE_BYPASS: return cpu_attack_vector_mitigated(CPU_MITIGATE_USER_USER); + case X86_BUG_VMSCAPE: + return cpu_attack_vector_mitigated(CPU_MITIGATE_GUEST_HOST); + default: WARN(1, "Unknown bug %x\n", bug); return false; @@ -1460,8 +1463,12 @@ retbleed_mitigation = RETBLEED_MITIGATION_EIBRS; break; default: - if (retbleed_mitigation != RETBLEED_MITIGATION_STUFF) - pr_err(RETBLEED_INTEL_MSG); + if (retbleed_mitigation != RETBLEED_MITIGATION_STUFF) { + if (retbleed_mitigation != RETBLEED_MITIGATION_NONE) + pr_err(RETBLEED_INTEL_MSG); + + retbleed_mitigation = RETBLEED_MITIGATION_NONE; + } } } @@ -2045,7 +2052,7 @@ static const char * const spectre_v2_strings[] = { [SPECTRE_V2_NONE] = "Vulnerable", [SPECTRE_V2_RETPOLINE] = "Mitigation: Retpolines", - [SPECTRE_V2_LFENCE] = "Mitigation: LFENCE", + [SPECTRE_V2_LFENCE] = "Vulnerable: LFENCE", [SPECTRE_V2_EIBRS] = "Mitigation: Enhanced / Automatic IBRS", [SPECTRE_V2_EIBRS_LFENCE] = "Mitigation: Enhanced / Automatic IBRS + LFENCE", [SPECTRE_V2_EIBRS_RETPOLINE] = "Mitigation: Enhanced / Automatic IBRS + Retpolines", @@ -3304,15 +3311,18 @@ static void __init vmscape_select_mitigation(void) { - if (cpu_mitigations_off() || - !boot_cpu_has_bug(X86_BUG_VMSCAPE) || + if (!boot_cpu_has_bug(X86_BUG_VMSCAPE) || !boot_cpu_has(X86_FEATURE_IBPB)) { vmscape_mitigation = VMSCAPE_MITIGATION_NONE; return; } - if (vmscape_mitigation == VMSCAPE_MITIGATION_AUTO) - vmscape_mitigation = VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER; + if (vmscape_mitigation == VMSCAPE_MITIGATION_AUTO) { + if (should_mitigate_vuln(X86_BUG_VMSCAPE)) + vmscape_mitigation = VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER; + else + vmscape_mitigation = VMSCAPE_MITIGATION_NONE; + } } static void __init vmscape_update_mitigation(void) @@ -3626,9 +3636,6 @@ static ssize_t spectre_v2_show_state(char *buf) { - if (spectre_v2_enabled == SPECTRE_V2_LFENCE) - return sysfs_emit(buf, "Vulnerable: LFENCE\n"); - if (spectre_v2_enabled == SPECTRE_V2_EIBRS && unprivileged_ebpf_enabled()) return sysfs_emit(buf, "Vulnerable: eIBRS with unprivileged eBPF\n"); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/cpu/common.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/cpu/common.c @@ -78,6 +78,10 @@ DEFINE_PER_CPU_READ_MOSTLY(struct cpuinfo_x86, cpu_info); EXPORT_PER_CPU_SYMBOL(cpu_info); +/* Used for modules: built-in code uses runtime constants */ +unsigned long USER_PTR_MAX; +EXPORT_SYMBOL(USER_PTR_MAX); + u32 elf_hwcap2 __read_mostly; /* Number of siblings per CPU package */ @@ -2578,7 +2582,7 @@ alternative_instructions(); if (IS_ENABLED(CONFIG_X86_64)) { - unsigned long USER_PTR_MAX = TASK_SIZE_MAX; + USER_PTR_MAX = TASK_SIZE_MAX; /* * Enable this when LAM is gated on LASS support --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/cpu/microcode/amd.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/cpu/microcode/amd.c @@ -194,7 +194,7 @@ } switch (cur_rev >> 8) { - case 0x80012: return cur_rev <= 0x800126f; break; + case 0x80012: return cur_rev <= 0x8001277; break; case 0x80082: return cur_rev <= 0x800820f; break; case 0x83010: return cur_rev <= 0x830107c; break; case 0x86001: return cur_rev <= 0x860010e; break; @@ -220,10 +220,13 @@ case 0xaa001: return cur_rev <= 0xaa00116; break; case 0xaa002: return cur_rev <= 0xaa00218; break; case 0xb0021: return cur_rev <= 0xb002146; break; + case 0xb0081: return cur_rev <= 0xb008111; break; case 0xb1010: return cur_rev <= 0xb101046; break; case 0xb2040: return cur_rev <= 0xb204031; break; case 0xb4040: return cur_rev <= 0xb404031; break; + case 0xb4041: return cur_rev <= 0xb404101; break; case 0xb6000: return cur_rev <= 0xb600031; break; + case 0xb6080: return cur_rev <= 0xb608031; break; case 0xb7000: return cur_rev <= 0xb700031; break; default: break; } @@ -233,13 +236,31 @@ return true; } +static bool cpu_has_entrysign(void) +{ + unsigned int fam = x86_family(bsp_cpuid_1_eax); + unsigned int model = x86_model(bsp_cpuid_1_eax); + + if (fam == 0x17 || fam == 0x19) + return true; + + if (fam == 0x1a) { + if (model <= 0x2f || + (0x40 <= model && model <= 0x4f) || + (0x60 <= model && model <= 0x6f)) + return true; + } + + return false; +} + static bool verify_sha256_digest(u32 patch_id, u32 cur_rev, const u8 *data, unsigned int len) { struct patch_digest *pd = NULL; u8 digest[SHA256_DIGEST_SIZE]; int i; - if (x86_family(bsp_cpuid_1_eax) < 0x17) + if (!cpu_has_entrysign()) return true; if (!need_sha_check(cur_rev)) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/cpu/mshyperv.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/cpu/mshyperv.c @@ -565,6 +565,11 @@ machine_ops.crash_shutdown = hv_machine_crash_shutdown; #endif #endif + /* + * HV_ACCESS_TSC_INVARIANT is always zero for the root partition. Root + * partition doesn't need to write to synthetic MSR to enable invariant + * TSC feature. It sees what the hardware provides. + */ if (ms_hyperv.features & HV_ACCESS_TSC_INVARIANT) { /* * Writing to synthetic MSR 0x40000118 updates/changes the @@ -636,8 +641,12 @@ * TSC should be marked as unstable only after Hyper-V * clocksource has been initialized. This ensures that the * stability of the sched_clock is not altered. + * + * HV_ACCESS_TSC_INVARIANT is always zero for the root partition. No + * need to check for it. */ - if (!(ms_hyperv.features & HV_ACCESS_TSC_INVARIANT)) + if (!hv_root_partition() && + !(ms_hyperv.features & HV_ACCESS_TSC_INVARIANT)) mark_tsc_unstable("running on Hyper-V"); hardlockup_detector_disable(); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/cpu/resctrl/monitor.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/cpu/resctrl/monitor.c @@ -224,15 +224,35 @@ return chunks >> shift; } +static u64 get_corrected_val(struct rdt_resource *r, struct rdt_mon_domain *d, + u32 rmid, enum resctrl_event_id eventid, u64 msr_val) +{ + struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d); + struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); + struct arch_mbm_state *am; + u64 chunks; + + am = get_arch_mbm_state(hw_dom, rmid, eventid); + if (am) { + am->chunks += mbm_overflow_count(am->prev_msr, msr_val, + hw_res->mbm_width); + chunks = get_corrected_mbm_count(rmid, am->chunks); + am->prev_msr = msr_val; + } else { + chunks = msr_val; + } + + return chunks * hw_res->mon_scale; +} + int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mon_domain *d, u32 unused, u32 rmid, enum resctrl_event_id eventid, u64 *val, void *ignored) { struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d); - struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); int cpu = cpumask_any(&d->hdr.cpu_mask); struct arch_mbm_state *am; - u64 msr_val, chunks; + u64 msr_val; u32 prmid; int ret; @@ -240,22 +260,16 @@ prmid = logical_rmid_to_physical_rmid(cpu, rmid); ret = __rmid_read_phys(prmid, eventid, &msr_val); - if (ret) - return ret; - am = get_arch_mbm_state(hw_dom, rmid, eventid); - if (am) { - am->chunks += mbm_overflow_count(am->prev_msr, msr_val, - hw_res->mbm_width); - chunks = get_corrected_mbm_count(rmid, am->chunks); - am->prev_msr = msr_val; - } else { - chunks = msr_val; + if (!ret) { + *val = get_corrected_val(r, d, rmid, eventid, msr_val); + } else if (ret == -EINVAL) { + am = get_arch_mbm_state(hw_dom, rmid, eventid); + if (am) + am->prev_msr = 0; } - *val = chunks * hw_res->mon_scale; - - return 0; + return ret; } /* --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/dumpstack.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/dumpstack.c @@ -181,8 +181,8 @@ * in false positive reports. Disable instrumentation to avoid those. */ __no_kmsan_checks -static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, const char *log_lvl) +static void __show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, const char *log_lvl) { struct unwind_state state; struct stack_info stack_info = {0}; @@ -303,6 +303,25 @@ } } +static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, const char *log_lvl) +{ + /* + * Disable KASAN to avoid false positives during walking another + * task's stacks, as values on these stacks may change concurrently + * with task execution. + */ + bool disable_kasan = task && task != current; + + if (disable_kasan) + kasan_disable_current(); + + __show_trace_log_lvl(task, regs, stack, log_lvl); + + if (disable_kasan) + kasan_enable_current(); +} + void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl) { --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/early-quirks.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/early-quirks.c @@ -29,6 +29,37 @@ #include #include +static void __init early_pci_clear_msi(int bus, int slot, int func) +{ + int pos; + u16 ctrl; + + if (likely(!pci_early_clear_msi)) + return; + + pr_info_once("Clearing MSI/MSI-X enable bits early in boot (quirk)\n"); + + pos = pci_early_find_cap(bus, slot, func, PCI_CAP_ID_MSI); + if (pos) { + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSI_FLAGS); + ctrl &= ~PCI_MSI_FLAGS_ENABLE; + write_pci_config_16(bus, slot, func, pos + PCI_MSI_FLAGS, ctrl); + + /* Read again to flush previous write */ + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSI_FLAGS); + } + + pos = pci_early_find_cap(bus, slot, func, PCI_CAP_ID_MSIX); + if (pos) { + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSIX_FLAGS); + ctrl &= ~PCI_MSIX_FLAGS_ENABLE; + write_pci_config_16(bus, slot, func, pos + PCI_MSIX_FLAGS, ctrl); + + /* Read again to flush previous write */ + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSIX_FLAGS); + } +} + static void __init fix_hypertransport_config(int num, int slot, int func) { u32 htcfg; @@ -727,6 +758,7 @@ PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, { PCI_VENDOR_ID_BROADCOM, 0x4331, PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset}, + { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, early_pci_clear_msi}, {} }; @@ -779,6 +811,10 @@ PCI_HEADER_TYPE); if ((type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) { + /* pci_early_clear_msi scans the buses differently. */ + if (pci_early_clear_msi) + return -1; + sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS); if (sec > num) early_pci_scan_bus(sec); @@ -805,8 +841,13 @@ void __init early_quirks(void) { + int bus; + if (!early_pci_allowed()) return; early_pci_scan_bus(0); + /* pci_early_clear_msi scans more buses. */ + for (bus = 1; pci_early_clear_msi && bus < 256; bus++) + early_pci_scan_bus(bus); } --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/fpu/core.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/fpu/core.c @@ -631,7 +631,7 @@ } /* Clone current's FPU state on fork */ -int fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal, +int fpu_clone(struct task_struct *dst, u64 clone_flags, bool minimal, unsigned long ssp) { /* @@ -825,6 +825,9 @@ !fpregs_state_valid(fpu, smp_processor_id())) os_xrstor_supervisor(fpu->fpstate); + /* Ensure XFD state is in sync before reloading XSTATE */ + xfd_update_state(fpu->fpstate); + /* Reset user states in registers. */ restore_fpregs_from_init_fpstate(XFEATURE_MASK_USER_RESTORE); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/kvm.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/kvm.c @@ -933,6 +933,19 @@ static void __init kvm_init_platform(void) { + u64 tolud = PFN_PHYS(e820__end_of_low_ram_pfn()); + /* + * Note, hardware requires variable MTRR ranges to be power-of-2 sized + * and naturally aligned. But when forcing guest MTRR state, Linux + * doesn't program the forced ranges into hardware. Don't bother doing + * the math to generate a technically-legal range. + */ + struct mtrr_var_range pci_hole = { + .base_lo = tolud | X86_MEMTYPE_UC, + .mask_lo = (u32)(~(SZ_4G - tolud - 1)) | MTRR_PHYSMASK_V, + .mask_hi = (BIT_ULL(boot_cpu_data.x86_phys_bits) - 1) >> 32, + }; + if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) && kvm_para_has_feature(KVM_FEATURE_MIGRATION_CONTROL)) { unsigned long nr_pages; @@ -982,8 +995,12 @@ kvmclock_init(); x86_platform.apic_post_init = kvm_apic_init; - /* Set WB as the default cache mode for SEV-SNP and TDX */ - guest_force_mtrr_state(NULL, 0, MTRR_TYPE_WRBACK); + /* + * Set WB as the default cache mode for SEV-SNP and TDX, with a single + * UC range for the legacy PCI hole, e.g. so that devices that expect + * to get UC/WC mappings don't get surprised with WB. + */ + guest_force_mtrr_state(&pci_hole, 1, MTRR_TYPE_WRBACK); } #if defined(CONFIG_AMD_MEM_ENCRYPT) @@ -1073,16 +1090,6 @@ void __init kvm_spinlock_init(void) { /* - * In case host doesn't support KVM_FEATURE_PV_UNHALT there is still an - * advantage of keeping virt_spin_lock_key enabled: virt_spin_lock() is - * preferred over native qspinlock when vCPU is preempted. - */ - if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT)) { - pr_info("PV spinlocks disabled, no host support\n"); - return; - } - - /* * Disable PV spinlocks and use native qspinlock when dedicated pCPUs * are available. */ @@ -1101,6 +1108,16 @@ goto out; } + /* + * In case host doesn't support KVM_FEATURE_PV_UNHALT there is still an + * advantage of keeping virt_spin_lock_key enabled: virt_spin_lock() is + * preferred over native qspinlock when vCPU is preempted. + */ + if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT)) { + pr_info("PV spinlocks disabled, no host support\n"); + return; + } + pr_info("PV spinlocks enabled\n"); __pv_init_lock_hash(); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/machine_kexec_64.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/machine_kexec_64.c @@ -29,6 +29,7 @@ #include #include #include +#include #ifdef CONFIG_ACPI /* @@ -346,6 +347,22 @@ unsigned long reloc_end = (unsigned long)__relocate_kernel_end; int result; + /* + * Some early TDX-capable platforms have an erratum. A kernel + * partial write (a write transaction of less than cacheline + * lands at memory controller) to TDX private memory poisons that + * memory, and a subsequent read triggers a machine check. + * + * On those platforms the old kernel must reset TDX private + * memory before jumping to the new kernel otherwise the new + * kernel may see unexpected machine check. For simplicity + * just fail kexec/kdump on those platforms. + */ + if (boot_cpu_has_bug(X86_BUG_TDX_PW_MCE)) { + pr_info_once("Not allowed on platform with tdx_pw_mce bug\n"); + return -EOPNOTSUPP; + } + /* Setup the identity mapped 64bit page table */ result = init_pgtable(image, __pa(control_page)); if (result) @@ -384,16 +401,10 @@ { unsigned long reloc_start = (unsigned long)__relocate_kernel_start; relocate_kernel_fn *relocate_kernel_ptr; - unsigned int host_mem_enc_active; + unsigned int relocate_kernel_flags; int save_ftrace_enabled; void *control_page; - /* - * This must be done before load_segments() since if call depth tracking - * is used then GS must be valid to make any function calls. - */ - host_mem_enc_active = cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT); - #ifdef CONFIG_KEXEC_JUMP if (image->preserve_context) save_processor_state(); @@ -427,6 +438,17 @@ */ relocate_kernel_ptr = control_page + (unsigned long)relocate_kernel - reloc_start; + relocate_kernel_flags = 0; + if (image->preserve_context) + relocate_kernel_flags |= RELOC_KERNEL_PRESERVE_CONTEXT; + + /* + * This must be done before load_segments() since it resets + * GS to 0 and percpu data needs the correct GS to work. + */ + if (this_cpu_read(cache_state_incoherent)) + relocate_kernel_flags |= RELOC_KERNEL_CACHE_INCOHERENT; + /* * The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -436,6 +458,11 @@ * * Take advantage of this here by force loading the segments, * before the GDT is zapped with an invalid value. + * + * load_segments() resets GS to 0. Don't make any function call + * after here since call depth tracking uses percpu variables to + * operate (relocate_kernel() is explicitly ignored by call depth + * tracking). */ load_segments(); @@ -443,8 +470,7 @@ image->start = relocate_kernel_ptr((unsigned long)image->head, virt_to_phys(control_page), image->start, - image->preserve_context, - host_mem_enc_active); + relocate_kernel_flags); #ifdef CONFIG_KEXEC_JUMP if (image->preserve_context) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/process.c @@ -89,6 +89,16 @@ EXPORT_PER_CPU_SYMBOL_GPL(__tss_limit_invalid); /* + * The cache may be in an incoherent state and needs flushing during kexec. + * E.g., on SME/TDX platforms, dirty cacheline aliases with and without + * encryption bit(s) can coexist and the cache needs to be flushed before + * booting to the new kernel to avoid the silent memory corruption due to + * dirty cachelines with different encryption property being written back + * to the memory. + */ +DEFINE_PER_CPU(bool, cache_state_incoherent); + +/* * this gets called so that we can store lazy state into memory and copy the * current task into the new thread. */ @@ -159,7 +169,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long sp = args->stack; unsigned long tls = args->tls; struct inactive_task_frame *frame; @@ -827,19 +837,7 @@ disable_local_APIC(); mcheck_cpu_clear(c); - /* - * Use wbinvd on processors that support SME. This provides support - * for performing a successful kexec when going from SME inactive - * to SME active (or vice-versa). The cache must be cleared so that - * if there are entries with the same physical address, both with and - * without the encryption bit, they don't race each other when flushed - * and potentially end up with the wrong entry being committed to - * memory. - * - * Test the CPUID bit directly because the machine might've cleared - * X86_FEATURE_SME due to cmdline options. - */ - if (c->extended_cpuid_level >= 0x8000001f && (cpuid_eax(0x8000001f) & BIT(0))) + if (this_cpu_read(cache_state_incoherent)) wbinvd(); /* --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/reboot.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/reboot.c @@ -488,7 +488,46 @@ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, - + { /* Handle problems with rebooting on the Latitude E6520. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6520"), + }, + }, + { /* Handle problems with rebooting on the OptiPlex 790. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 790", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 790"), + }, + }, + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + }, + }, + { /* Handle problems with rebooting on the Latitude E6220. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6220", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6220"), + }, + }, + { /* Handle problems with rebooting on the OptiPlex 390. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 390", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 390"), + }, + }, { } }; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/relocate_kernel_64.S +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/relocate_kernel_64.S @@ -66,8 +66,7 @@ * %rdi indirection_page * %rsi pa_control_page * %rdx start address - * %rcx preserve_context - * %r8 host_mem_enc_active + * %rcx flags: RELOC_KERNEL_* */ /* Save the CPU context, used for jumping back */ @@ -111,7 +110,7 @@ /* save indirection list for jumping back */ movq %rdi, pa_backup_pages_map(%rip) - /* Save the preserve_context to %r11 as swap_pages clobbers %rcx. */ + /* Save the flags to %r11 as swap_pages clobbers %rcx. */ movq %rcx, %r11 /* setup a new stack at the end of the physical control page */ @@ -129,9 +128,8 @@ /* * %rdi indirection page * %rdx start address - * %r8 host_mem_enc_active * %r9 page table page - * %r11 preserve_context + * %r11 flags: RELOC_KERNEL_* * %r13 original CR4 when relocate_kernel() was invoked */ @@ -200,14 +198,21 @@ movq %r9, %cr3 /* + * If the memory cache is in incoherent state, e.g., due to + * memory encryption, do WBINVD to flush cache. + * * If SME is active, there could be old encrypted cache line * entries that will conflict with the now unencrypted memory * used by kexec. Flush the caches before copying the kernel. + * + * Note SME sets this flag to true when the platform supports + * SME, so the WBINVD is performed even SME is not activated + * by the kernel. But this has no harm. */ - testq %r8, %r8 - jz .Lsme_off + testb $RELOC_KERNEL_CACHE_INCOHERENT, %r11b + jz .Lnowbinvd wbinvd -.Lsme_off: +.Lnowbinvd: call swap_pages @@ -220,7 +225,7 @@ movq %cr3, %rax movq %rax, %cr3 - testq %r11, %r11 /* preserve_context */ + testb $RELOC_KERNEL_PRESERVE_CONTEXT, %r11b jnz .Lrelocate /* @@ -273,7 +278,13 @@ ANNOTATE_NOENDBR andq $PAGE_MASK, %r8 lea PAGE_SIZE(%r8), %rsp - movl $1, %r11d /* Ensure preserve_context flag is set */ + /* + * Ensure RELOC_KERNEL_PRESERVE_CONTEXT flag is set so that + * swap_pages() can swap pages correctly. Note all other + * RELOC_KERNEL_* flags passed to relocate_kernel() are not + * restored. + */ + movl $RELOC_KERNEL_PRESERVE_CONTEXT, %r11d call swap_pages movq kexec_va_control_page(%rip), %rax 0: addq $virtual_mapped - 0b, %rax @@ -321,7 +332,7 @@ UNWIND_HINT_END_OF_STACK /* * %rdi indirection page - * %r11 preserve_context + * %r11 flags: RELOC_KERNEL_* */ movq %rdi, %rcx /* Put the indirection_page in %rcx */ xorl %edi, %edi @@ -357,7 +368,8 @@ movq %rdi, %rdx /* Save destination page to %rdx */ movq %rsi, %rax /* Save source page to %rax */ - testq %r11, %r11 /* Only actually swap for ::preserve_context */ + /* Only actually swap for ::preserve_context */ + testb $RELOC_KERNEL_PRESERVE_CONTEXT, %r11b jz .Lnoswap /* copy source page to swap page */ --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/setup.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -994,6 +995,13 @@ reserve_ibft_region(); x86_init.resources.dmi_setup(); + efi_set_secure_boot(boot_params.secure_boot); + +#ifdef CONFIG_LOCK_DOWN_IN_SECURE_BOOT + if (efi_enabled(EFI_SECURE_BOOT)) + security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX); +#endif + /* * VMware detection requires dmi to be available, so this * needs to be done after dmi_setup(), for the boot CPU. @@ -1154,19 +1162,7 @@ /* Allocate bigger log buffer */ setup_log_buf(1); - if (efi_enabled(EFI_BOOT)) { - switch (boot_params.secure_boot) { - case efi_secureboot_mode_disabled: - pr_info("Secure boot disabled\n"); - break; - case efi_secureboot_mode_enabled: - pr_info("Secure boot enabled\n"); - break; - default: - pr_info("Secure boot could not be determined\n"); - break; - } - } + efi_set_secure_boot(boot_params.secure_boot); reserve_initrd(); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/shstk.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/shstk.c @@ -191,7 +191,7 @@ current->thread.features_locked = 0; } -unsigned long shstk_alloc_thread_stack(struct task_struct *tsk, unsigned long clone_flags, +unsigned long shstk_alloc_thread_stack(struct task_struct *tsk, u64 clone_flags, unsigned long stack_size) { struct thread_shstk *shstk = &tsk->thread.shstk; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/smpboot.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/smpboot.c @@ -479,14 +479,14 @@ static bool x86_has_numa_in_package; static struct sched_domain_topology_level x86_topology[] = { - SDTL_INIT(cpu_smt_mask, cpu_smt_flags, SMT), + SDTL_INIT(tl_smt_mask, cpu_smt_flags, SMT), #ifdef CONFIG_SCHED_CLUSTER - SDTL_INIT(cpu_clustergroup_mask, x86_cluster_flags, CLS), + SDTL_INIT(tl_cls_mask, x86_cluster_flags, CLS), #endif #ifdef CONFIG_SCHED_MC - SDTL_INIT(cpu_coregroup_mask, x86_core_flags, MC), + SDTL_INIT(tl_mc_mask, x86_core_flags, MC), #endif - SDTL_INIT(cpu_cpu_mask, x86_sched_itmt_flags, PKG), + SDTL_INIT(tl_pkg_mask, x86_sched_itmt_flags, PKG), { NULL }, }; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kernel/umip.c +++ linux-riscv-6.17-6.17.0/arch/x86/kernel/umip.c @@ -156,15 +156,26 @@ if (!insn->modrm.nbytes) return -EINVAL; - /* All the instructions of interest start with 0x0f. */ - if (insn->opcode.bytes[0] != 0xf) + /* The instructions of interest have 2-byte opcodes: 0F 00 or 0F 01. */ + if (insn->opcode.nbytes < 2 || insn->opcode.bytes[0] != 0xf) return -EINVAL; if (insn->opcode.bytes[1] == 0x1) { switch (X86_MODRM_REG(insn->modrm.value)) { case 0: + /* The reg form of 0F 01 /0 encodes VMX instructions. */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) + return -EINVAL; + return UMIP_INST_SGDT; case 1: + /* + * The reg form of 0F 01 /1 encodes MONITOR/MWAIT, + * STAC/CLAC, and ENCLS. + */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) + return -EINVAL; + return UMIP_INST_SIDT; case 4: return UMIP_INST_SMSW; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/emulate.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/emulate.c @@ -5107,12 +5107,11 @@ ctxt->mem_read.end = 0; } -int x86_emulate_insn(struct x86_emulate_ctxt *ctxt) +int x86_emulate_insn(struct x86_emulate_ctxt *ctxt, bool check_intercepts) { const struct x86_emulate_ops *ops = ctxt->ops; int rc = X86EMUL_CONTINUE; int saved_dst_type = ctxt->dst.type; - bool is_guest_mode = ctxt->ops->is_guest_mode(ctxt); ctxt->mem_read.pos = 0; @@ -5160,7 +5159,7 @@ fetch_possible_mmx_operand(&ctxt->dst); } - if (unlikely(is_guest_mode) && ctxt->intercept) { + if (unlikely(check_intercepts) && ctxt->intercept) { rc = emulator_check_intercept(ctxt, ctxt->intercept, X86_ICPT_PRE_EXCEPT); if (rc != X86EMUL_CONTINUE) @@ -5189,7 +5188,7 @@ goto done; } - if (unlikely(is_guest_mode) && (ctxt->d & Intercept)) { + if (unlikely(check_intercepts) && (ctxt->d & Intercept)) { rc = emulator_check_intercept(ctxt, ctxt->intercept, X86_ICPT_POST_EXCEPT); if (rc != X86EMUL_CONTINUE) @@ -5243,7 +5242,7 @@ special_insn: - if (unlikely(is_guest_mode) && (ctxt->d & Intercept)) { + if (unlikely(check_intercepts) && (ctxt->d & Intercept)) { rc = emulator_check_intercept(ctxt, ctxt->intercept, X86_ICPT_POST_MEMACCESS); if (rc != X86EMUL_CONTINUE) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/kvm_emulate.h +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/kvm_emulate.h @@ -235,7 +235,6 @@ void (*set_nmi_mask)(struct x86_emulate_ctxt *ctxt, bool masked); bool (*is_smm)(struct x86_emulate_ctxt *ctxt); - bool (*is_guest_mode)(struct x86_emulate_ctxt *ctxt); int (*leave_smm)(struct x86_emulate_ctxt *ctxt); void (*triple_fault)(struct x86_emulate_ctxt *ctxt); int (*set_xcr)(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr); @@ -521,7 +520,7 @@ #define EMULATION_RESTART 1 #define EMULATION_INTERCEPTED 2 void init_decode_cache(struct x86_emulate_ctxt *ctxt); -int x86_emulate_insn(struct x86_emulate_ctxt *ctxt); +int x86_emulate_insn(struct x86_emulate_ctxt *ctxt, bool check_intercepts); int emulator_task_switch(struct x86_emulate_ctxt *ctxt, u16 tss_selector, int idt_index, int reason, bool has_error_code, u32 error_code); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/pmu.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/pmu.c @@ -650,6 +650,7 @@ msr_info->data = pmu->global_ctrl; break; case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_CLR: + case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_SET: case MSR_CORE_PERF_GLOBAL_OVF_CTRL: msr_info->data = 0; break; @@ -711,6 +712,10 @@ if (!msr_info->host_initiated) pmu->global_status &= ~data; break; + case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_SET: + if (!msr_info->host_initiated) + pmu->global_status |= data & ~pmu->global_status_rsvd; + break; default: kvm_pmu_mark_pmc_in_use(vcpu, msr_info->index); return kvm_pmu_call(set_msr)(vcpu, msr_info); --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/pmu.h +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/pmu.h @@ -13,7 +13,7 @@ #define MSR_IA32_MISC_ENABLE_PMU_RO_MASK (MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL | \ MSR_IA32_MISC_ENABLE_BTS_UNAVAIL) -/* retrieve the 4 bits for EN and PMI out of IA32_FIXED_CTR_CTRL */ +/* retrieve a fixed counter bits out of IA32_FIXED_CTR_CTRL */ #define fixed_ctrl_field(ctrl_reg, idx) \ (((ctrl_reg) >> ((idx) * INTEL_FIXED_BITS_STRIDE)) & INTEL_FIXED_BITS_MASK) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/svm/nested.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/svm/nested.c @@ -669,11 +669,10 @@ */ svm_copy_lbrs(vmcb02, vmcb12); vmcb02->save.dbgctl &= ~DEBUGCTL_RESERVED_BITS; - svm_update_lbrv(&svm->vcpu); - - } else if (unlikely(vmcb01->control.virt_ext & LBR_CTL_ENABLE_MASK)) { + } else { svm_copy_lbrs(vmcb02, vmcb01); } + svm_update_lbrv(&svm->vcpu); } static inline bool is_evtinj_soft(u32 evtinj) @@ -825,11 +824,7 @@ svm->soft_int_next_rip = vmcb12_rip; } - vmcb02->control.virt_ext = vmcb01->control.virt_ext & - LBR_CTL_ENABLE_MASK; - if (guest_cpu_cap_has(vcpu, X86_FEATURE_LBRV)) - vmcb02->control.virt_ext |= - (svm->nested.ctl.virt_ext & LBR_CTL_ENABLE_MASK); + /* LBR_CTL_ENABLE_MASK is controlled by svm_update_lbrv() */ if (!nested_vmcb_needs_vls_intercept(svm)) vmcb02->control.virt_ext |= VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK; @@ -1169,13 +1164,12 @@ kvm_make_request(KVM_REQ_EVENT, &svm->vcpu); if (unlikely(guest_cpu_cap_has(vcpu, X86_FEATURE_LBRV) && - (svm->nested.ctl.virt_ext & LBR_CTL_ENABLE_MASK))) { + (svm->nested.ctl.virt_ext & LBR_CTL_ENABLE_MASK))) svm_copy_lbrs(vmcb12, vmcb02); - svm_update_lbrv(vcpu); - } else if (unlikely(vmcb01->control.virt_ext & LBR_CTL_ENABLE_MASK)) { + else svm_copy_lbrs(vmcb01, vmcb02); - svm_update_lbrv(vcpu); - } + + svm_update_lbrv(vcpu); if (vnmi) { if (vmcb02->control.int_ctl & V_NMI_BLOCKING_MASK) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/svm/pmu.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/svm/pmu.c @@ -113,6 +113,7 @@ case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS: case MSR_AMD64_PERF_CNTR_GLOBAL_CTL: case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_CLR: + case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_SET: return pmu->version > 1; default: if (msr > MSR_F15H_PERF_CTR5 && --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/svm/sev.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/svm/sev.c @@ -4618,6 +4618,16 @@ hostsa->dr2_addr_mask = amd_get_dr_addr_mask(2); hostsa->dr3_addr_mask = amd_get_dr_addr_mask(3); } + + /* + * TSC_AUX is always virtualized for SEV-ES guests when the feature is + * available, i.e. TSC_AUX is loaded on #VMEXIT from the host save area. + * Set the save area to the current hardware value, i.e. the current + * user return value, so that the correct value is restored on #VMEXIT. + */ + if (cpu_feature_enabled(X86_FEATURE_V_TSC_AUX) && + !WARN_ON_ONCE(tsc_aux_uret_slot < 0)) + hostsa->tsc_aux = kvm_get_user_return_msr(tsc_aux_uret_slot); } void sev_vcpu_deliver_sipi_vector(struct kvm_vcpu *vcpu, u8 vector) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/svm/svm.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/svm/svm.c @@ -195,7 +195,7 @@ * RDTSCP and RDPID are not used in the kernel, specifically to allow KVM to * defer the restoration of TSC_AUX until the CPU returns to userspace. */ -static int tsc_aux_uret_slot __read_mostly = -1; +int tsc_aux_uret_slot __ro_after_init = -1; static int get_npt_level(void) { @@ -280,6 +280,7 @@ } static int __svm_skip_emulated_instruction(struct kvm_vcpu *vcpu, + int emul_type, bool commit_side_effects) { struct vcpu_svm *svm = to_svm(vcpu); @@ -301,7 +302,7 @@ if (unlikely(!commit_side_effects)) old_rflags = svm->vmcb->save.rflags; - if (!kvm_emulate_instruction(vcpu, EMULTYPE_SKIP)) + if (!kvm_emulate_instruction(vcpu, emul_type)) return 0; if (unlikely(!commit_side_effects)) @@ -319,11 +320,13 @@ static int svm_skip_emulated_instruction(struct kvm_vcpu *vcpu) { - return __svm_skip_emulated_instruction(vcpu, true); + return __svm_skip_emulated_instruction(vcpu, EMULTYPE_SKIP, true); } -static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu) +static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu, u8 vector) { + const int emul_type = EMULTYPE_SKIP | EMULTYPE_SKIP_SOFT_INT | + EMULTYPE_SET_SOFT_INT_VECTOR(vector); unsigned long rip, old_rip = kvm_rip_read(vcpu); struct vcpu_svm *svm = to_svm(vcpu); @@ -339,7 +342,7 @@ * in use, the skip must not commit any side effects such as clearing * the interrupt shadow or RFLAGS.RF. */ - if (!__svm_skip_emulated_instruction(vcpu, !nrips)) + if (!__svm_skip_emulated_instruction(vcpu, emul_type, !nrips)) return -EIO; rip = kvm_rip_read(vcpu); @@ -375,7 +378,7 @@ kvm_deliver_exception_payload(vcpu, ex); if (kvm_exception_is_soft(ex->vector) && - svm_update_soft_interrupt_rip(vcpu)) + svm_update_soft_interrupt_rip(vcpu, ex->vector)) return; svm->vmcb->control.event_inj = ex->vector @@ -577,18 +580,6 @@ amd_pmu_enable_virt(); - /* - * If TSC_AUX virtualization is supported, TSC_AUX becomes a swap type - * "B" field (see sev_es_prepare_switch_to_guest()) for SEV-ES guests. - * Since Linux does not change the value of TSC_AUX once set, prime the - * TSC_AUX field now to avoid a RDMSR on every vCPU run. - */ - if (boot_cpu_has(X86_FEATURE_V_TSC_AUX)) { - u32 __maybe_unused msr_hi; - - rdmsr(MSR_TSC_AUX, sev_es_host_save_area(sd)->tsc_aux, msr_hi); - } - return 0; } @@ -725,7 +716,11 @@ static void svm_recalc_lbr_msr_intercepts(struct kvm_vcpu *vcpu) { - bool intercept = !(to_svm(vcpu)->vmcb->control.virt_ext & LBR_CTL_ENABLE_MASK); + struct vcpu_svm *svm = to_svm(vcpu); + bool intercept = !(svm->vmcb->control.virt_ext & LBR_CTL_ENABLE_MASK); + + if (intercept == svm->lbr_msrs_intercepted) + return; svm_set_intercept_for_msr(vcpu, MSR_IA32_LASTBRANCHFROMIP, MSR_TYPE_RW, intercept); svm_set_intercept_for_msr(vcpu, MSR_IA32_LASTBRANCHTOIP, MSR_TYPE_RW, intercept); @@ -734,6 +729,8 @@ if (sev_es_guest(vcpu->kvm)) svm_set_intercept_for_msr(vcpu, MSR_IA32_DEBUGCTLMSR, MSR_TYPE_RW, intercept); + + svm->lbr_msrs_intercepted = intercept; } void svm_set_x2apic_msr_interception(struct vcpu_svm *svm, bool intercept) @@ -864,60 +861,43 @@ vmcb_mark_dirty(to_vmcb, VMCB_LBR); } -void svm_enable_lbrv(struct kvm_vcpu *vcpu) +static void __svm_enable_lbrv(struct kvm_vcpu *vcpu) { - struct vcpu_svm *svm = to_svm(vcpu); - - svm->vmcb->control.virt_ext |= LBR_CTL_ENABLE_MASK; - svm_recalc_lbr_msr_intercepts(vcpu); - - /* Move the LBR msrs to the vmcb02 so that the guest can see them. */ - if (is_guest_mode(vcpu)) - svm_copy_lbrs(svm->vmcb, svm->vmcb01.ptr); + to_svm(vcpu)->vmcb->control.virt_ext |= LBR_CTL_ENABLE_MASK; } -static void svm_disable_lbrv(struct kvm_vcpu *vcpu) +void svm_enable_lbrv(struct kvm_vcpu *vcpu) { - struct vcpu_svm *svm = to_svm(vcpu); - - KVM_BUG_ON(sev_es_guest(vcpu->kvm), vcpu->kvm); - svm->vmcb->control.virt_ext &= ~LBR_CTL_ENABLE_MASK; + __svm_enable_lbrv(vcpu); svm_recalc_lbr_msr_intercepts(vcpu); - - /* - * Move the LBR msrs back to the vmcb01 to avoid copying them - * on nested guest entries. - */ - if (is_guest_mode(vcpu)) - svm_copy_lbrs(svm->vmcb01.ptr, svm->vmcb); } -static struct vmcb *svm_get_lbr_vmcb(struct vcpu_svm *svm) +static void __svm_disable_lbrv(struct kvm_vcpu *vcpu) { - /* - * If LBR virtualization is disabled, the LBR MSRs are always kept in - * vmcb01. If LBR virtualization is enabled and L1 is running VMs of - * its own, the MSRs are moved between vmcb01 and vmcb02 as needed. - */ - return svm->vmcb->control.virt_ext & LBR_CTL_ENABLE_MASK ? svm->vmcb : - svm->vmcb01.ptr; + KVM_BUG_ON(sev_es_guest(vcpu->kvm), vcpu->kvm); + to_svm(vcpu)->vmcb->control.virt_ext &= ~LBR_CTL_ENABLE_MASK; } void svm_update_lbrv(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); bool current_enable_lbrv = svm->vmcb->control.virt_ext & LBR_CTL_ENABLE_MASK; - bool enable_lbrv = (svm_get_lbr_vmcb(svm)->save.dbgctl & DEBUGCTLMSR_LBR) || + bool enable_lbrv = (svm->vmcb->save.dbgctl & DEBUGCTLMSR_LBR) || (is_guest_mode(vcpu) && guest_cpu_cap_has(vcpu, X86_FEATURE_LBRV) && (svm->nested.ctl.virt_ext & LBR_CTL_ENABLE_MASK)); - if (enable_lbrv == current_enable_lbrv) - return; + if (enable_lbrv && !current_enable_lbrv) + __svm_enable_lbrv(vcpu); + else if (!enable_lbrv && current_enable_lbrv) + __svm_disable_lbrv(vcpu); - if (enable_lbrv) - svm_enable_lbrv(vcpu); - else - svm_disable_lbrv(vcpu); + /* + * During nested transitions, it is possible that the current VMCB has + * LBR_CTL set, but the previous LBR_CTL had it cleared (or vice versa). + * In this case, even though LBR_CTL does not need an update, intercepts + * do, so always recalculate the intercepts here. + */ + svm_recalc_lbr_msr_intercepts(vcpu); } void disable_nmi_singlestep(struct vcpu_svm *svm) @@ -1307,6 +1287,7 @@ } svm->x2avic_msrs_intercepted = true; + svm->lbr_msrs_intercepted = true; svm->vmcb01.ptr = page_address(vmcb01_page); svm->vmcb01.pa = __sme_set(page_to_pfn(vmcb01_page) << PAGE_SHIFT); @@ -1423,10 +1404,10 @@ __svm_write_tsc_multiplier(vcpu->arch.tsc_scaling_ratio); /* - * TSC_AUX is always virtualized for SEV-ES guests when the feature is - * available. The user return MSR support is not required in this case - * because TSC_AUX is restored on #VMEXIT from the host save area - * (which has been initialized in svm_enable_virtualization_cpu()). + * TSC_AUX is always virtualized (context switched by hardware) for + * SEV-ES guests when the feature is available. For non-SEV-ES guests, + * context switch TSC_AUX via the user_return MSR infrastructure (not + * all CPUs support TSC_AUX virtualization). */ if (likely(tsc_aux_uret_slot >= 0) && (!boot_cpu_has(X86_FEATURE_V_TSC_AUX) || !sev_es_guest(vcpu->kvm))) @@ -2788,19 +2769,19 @@ msr_info->data = svm->tsc_aux; break; case MSR_IA32_DEBUGCTLMSR: - msr_info->data = svm_get_lbr_vmcb(svm)->save.dbgctl; + msr_info->data = svm->vmcb->save.dbgctl; break; case MSR_IA32_LASTBRANCHFROMIP: - msr_info->data = svm_get_lbr_vmcb(svm)->save.br_from; + msr_info->data = svm->vmcb->save.br_from; break; case MSR_IA32_LASTBRANCHTOIP: - msr_info->data = svm_get_lbr_vmcb(svm)->save.br_to; + msr_info->data = svm->vmcb->save.br_to; break; case MSR_IA32_LASTINTFROMIP: - msr_info->data = svm_get_lbr_vmcb(svm)->save.last_excp_from; + msr_info->data = svm->vmcb->save.last_excp_from; break; case MSR_IA32_LASTINTTOIP: - msr_info->data = svm_get_lbr_vmcb(svm)->save.last_excp_to; + msr_info->data = svm->vmcb->save.last_excp_to; break; case MSR_VM_HSAVE_PA: msr_info->data = svm->nested.hsave_msr; @@ -3021,8 +3002,7 @@ * TSC_AUX is always virtualized for SEV-ES guests when the * feature is available. The user return MSR support is not * required in this case because TSC_AUX is restored on #VMEXIT - * from the host save area (which has been initialized in - * svm_enable_virtualization_cpu()). + * from the host save area. */ if (boot_cpu_has(X86_FEATURE_V_TSC_AUX) && sev_es_guest(vcpu->kvm)) break; @@ -3057,7 +3037,11 @@ if (data & DEBUGCTL_RESERVED_BITS) return 1; - svm_get_lbr_vmcb(svm)->save.dbgctl = data; + if (svm->vmcb->save.dbgctl == data) + break; + + svm->vmcb->save.dbgctl = data; + vmcb_mark_dirty(svm->vmcb, VMCB_LBR); svm_update_lbrv(vcpu); break; case MSR_VM_HSAVE_PA: @@ -3681,11 +3665,12 @@ static void svm_inject_irq(struct kvm_vcpu *vcpu, bool reinjected) { + struct kvm_queued_interrupt *intr = &vcpu->arch.interrupt; struct vcpu_svm *svm = to_svm(vcpu); u32 type; - if (vcpu->arch.interrupt.soft) { - if (svm_update_soft_interrupt_rip(vcpu)) + if (intr->soft) { + if (svm_update_soft_interrupt_rip(vcpu, intr->nr)) return; type = SVM_EVTINJ_TYPE_SOFT; @@ -3693,12 +3678,10 @@ type = SVM_EVTINJ_TYPE_INTR; } - trace_kvm_inj_virq(vcpu->arch.interrupt.nr, - vcpu->arch.interrupt.soft, reinjected); + trace_kvm_inj_virq(intr->nr, intr->soft, reinjected); ++vcpu->stat.irq_injections; - svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr | - SVM_EVTINJ_VALID | type; + svm->vmcb->control.event_inj = intr->nr | SVM_EVTINJ_VALID | type; } void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode, @@ -4180,13 +4163,21 @@ static fastpath_t svm_exit_handlers_fastpath(struct kvm_vcpu *vcpu) { struct vcpu_svm *svm = to_svm(vcpu); + struct vmcb_control_area *control = &svm->vmcb->control; + + /* + * Next RIP must be provided as IRQs are disabled, and accessing guest + * memory to decode the instruction might fault, i.e. might sleep. + */ + if (!nrips || !control->next_rip) + return EXIT_FASTPATH_NONE; if (is_guest_mode(vcpu)) return EXIT_FASTPATH_NONE; - switch (svm->vmcb->control.exit_code) { + switch (control->exit_code) { case SVM_EXIT_MSR: - if (!svm->vmcb->control.exit_info_1) + if (!control->exit_info_1) break; return handle_fastpath_set_msr_irqoff(vcpu); case SVM_EXIT_HLT: --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/svm/svm.h +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/svm/svm.h @@ -52,6 +52,8 @@ extern bool vnmi; extern int lbrv; +extern int tsc_aux_uret_slot __ro_after_init; + /* * Clean bits in VMCB. * VMCB_ALL_CLEAN_MASK might also need to @@ -332,6 +334,7 @@ bool guest_state_loaded; bool x2avic_msrs_intercepted; + bool lbr_msrs_intercepted; /* Guest GIF value, used when vGIF is not enabled */ bool guest_gif; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/vmx/common.h +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/vmx/common.h @@ -98,7 +98,7 @@ error_code |= (exit_qualification & EPT_VIOLATION_PROT_MASK) ? PFERR_PRESENT_MASK : 0; - if (error_code & EPT_VIOLATION_GVA_IS_VALID) + if (exit_qualification & EPT_VIOLATION_GVA_IS_VALID) error_code |= (exit_qualification & EPT_VIOLATION_GVA_TRANSLATED) ? PFERR_GUEST_FINAL_MASK : PFERR_GUEST_PAGE_MASK; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/vmx/nested.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/vmx/nested.c @@ -6216,19 +6216,26 @@ struct vmcs12 *vmcs12, union vmx_exit_reason exit_reason) { - u32 msr_index = kvm_rcx_read(vcpu); + u32 msr_index; gpa_t bitmap; if (!nested_cpu_has(vmcs12, CPU_BASED_USE_MSR_BITMAPS)) return true; + if (exit_reason.basic == EXIT_REASON_MSR_READ_IMM || + exit_reason.basic == EXIT_REASON_MSR_WRITE_IMM) + msr_index = vmx_get_exit_qual(vcpu); + else + msr_index = kvm_rcx_read(vcpu); + /* * The MSR_BITMAP page is divided into four 1024-byte bitmaps, * for the four combinations of read/write and low/high MSR numbers. * First we need to figure out which of the four to use: */ bitmap = vmcs12->msr_bitmap; - if (exit_reason.basic == EXIT_REASON_MSR_WRITE) + if (exit_reason.basic == EXIT_REASON_MSR_WRITE || + exit_reason.basic == EXIT_REASON_MSR_WRITE_IMM) bitmap += 2048; if (msr_index >= 0xc0000000) { msr_index -= 0xc0000000; @@ -6527,6 +6534,8 @@ return nested_cpu_has2(vmcs12, SECONDARY_EXEC_DESC); case EXIT_REASON_MSR_READ: case EXIT_REASON_MSR_WRITE: + case EXIT_REASON_MSR_READ_IMM: + case EXIT_REASON_MSR_WRITE_IMM: return nested_vmx_exit_handled_msr(vcpu, vmcs12, exit_reason); case EXIT_REASON_INVALID_STATE: return true; @@ -6578,6 +6587,14 @@ case EXIT_REASON_NOTIFY: /* Notify VM exit is not exposed to L1 */ return false; + case EXIT_REASON_SEAMCALL: + case EXIT_REASON_TDCALL: + /* + * SEAMCALL and TDCALL unconditionally VM-Exit, but aren't + * virtualized by KVM for L1 hypervisors, i.e. L1 should + * never want or expect such an exit. + */ + return false; default: return true; } --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/vmx/tdx.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/vmx/tdx.c @@ -442,6 +442,16 @@ tdx_flush_vp(&arg); } local_irq_restore(flags); + + /* + * Flush cache now if kexec is possible: this is necessary to avoid + * having dirty private memory cachelines when the new kernel boots, + * but WBINVD is a relatively expensive operation and doing it during + * kexec can exacerbate races in native_stop_other_cpus(). Do it + * now, since this is a safe moment and there is going to be no more + * TDX activity on this CPU from this point on. + */ + tdx_cpu_flush_cache_for_kexec(); } #define TDX_SEAMCALL_RETRIES 10000 @@ -861,6 +871,7 @@ if (tdx->vp.tdvpr_page) { tdx_reclaim_control_page(tdx->vp.tdvpr_page); tdx->vp.tdvpr_page = 0; + tdx->vp.tdvpr_pa = 0; } tdx->state = VCPU_TD_STATE_UNINITIALIZED; @@ -2940,6 +2951,13 @@ return -ENOMEM; tdx->vp.tdvpr_page = page; + /* + * page_to_phys() does not work in 'noinstr' code, like guest + * entry via tdh_vp_enter(). Precalculate and store it instead + * of doing it at runtime later. + */ + tdx->vp.tdvpr_pa = page_to_phys(tdx->vp.tdvpr_page); + tdx->vp.tdcx_pages = kcalloc(kvm_tdx->td.tdcx_nr_pages, sizeof(*tdx->vp.tdcx_pages), GFP_KERNEL); if (!tdx->vp.tdcx_pages) { @@ -3002,6 +3020,7 @@ if (tdx->vp.tdvpr_page) __free_page(tdx->vp.tdvpr_page); tdx->vp.tdvpr_page = 0; + tdx->vp.tdvpr_pa = 0; return ret; } @@ -3457,12 +3476,11 @@ if (r) goto tdx_bringup_err; + r = -EINVAL; /* Get TDX global information for later use */ tdx_sysinfo = tdx_get_sysinfo(); - if (WARN_ON_ONCE(!tdx_sysinfo)) { - r = -EINVAL; + if (WARN_ON_ONCE(!tdx_sysinfo)) goto get_sysinfo_err; - } /* Check TDX module and KVM capabilities */ if (!tdx_get_supported_attrs(&tdx_sysinfo->td_conf) || @@ -3505,14 +3523,11 @@ if (td_conf->max_vcpus_per_td < num_present_cpus()) { pr_err("Disable TDX: MAX_VCPU_PER_TD (%u) smaller than number of logical CPUs (%u).\n", td_conf->max_vcpus_per_td, num_present_cpus()); - r = -EINVAL; goto get_sysinfo_err; } - if (misc_cg_set_capacity(MISC_CG_RES_TDX, tdx_get_nr_guest_keyids())) { - r = -EINVAL; + if (misc_cg_set_capacity(MISC_CG_RES_TDX, tdx_get_nr_guest_keyids())) goto get_sysinfo_err; - } /* * Leave hardware virtualization enabled after TDX is enabled --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/vmx/vmx.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/vmx/vmx.c @@ -5953,6 +5953,12 @@ return 1; } +static int handle_tdx_instruction(struct kvm_vcpu *vcpu) +{ + kvm_queue_exception(vcpu, UD_VECTOR); + return 1; +} + #ifndef CONFIG_X86_SGX_KVM static int handle_encls(struct kvm_vcpu *vcpu) { @@ -6003,6 +6009,23 @@ return 1; } +static int vmx_get_msr_imm_reg(struct kvm_vcpu *vcpu) +{ + return vmx_get_instr_info_reg(vmcs_read32(VMX_INSTRUCTION_INFO)); +} + +static int handle_rdmsr_imm(struct kvm_vcpu *vcpu) +{ + return kvm_emulate_rdmsr_imm(vcpu, vmx_get_exit_qual(vcpu), + vmx_get_msr_imm_reg(vcpu)); +} + +static int handle_wrmsr_imm(struct kvm_vcpu *vcpu) +{ + return kvm_emulate_wrmsr_imm(vcpu, vmx_get_exit_qual(vcpu), + vmx_get_msr_imm_reg(vcpu)); +} + /* * The exit handlers return 1 if the exit was handled fully and guest execution * may resume. Otherwise they set the kvm_run parameter to indicate what needs @@ -6061,6 +6084,10 @@ [EXIT_REASON_ENCLS] = handle_encls, [EXIT_REASON_BUS_LOCK] = handle_bus_lock_vmexit, [EXIT_REASON_NOTIFY] = handle_notify, + [EXIT_REASON_SEAMCALL] = handle_tdx_instruction, + [EXIT_REASON_TDCALL] = handle_tdx_instruction, + [EXIT_REASON_MSR_READ_IMM] = handle_rdmsr_imm, + [EXIT_REASON_MSR_WRITE_IMM] = handle_wrmsr_imm, }; static const int kvm_vmx_max_exit_handlers = @@ -6495,6 +6522,8 @@ #ifdef CONFIG_MITIGATION_RETPOLINE if (exit_reason.basic == EXIT_REASON_MSR_WRITE) return kvm_emulate_wrmsr(vcpu); + else if (exit_reason.basic == EXIT_REASON_MSR_WRITE_IMM) + return handle_wrmsr_imm(vcpu); else if (exit_reason.basic == EXIT_REASON_PREEMPTION_TIMER) return handle_preemption_timer(vcpu); else if (exit_reason.basic == EXIT_REASON_INTERRUPT_WINDOW) --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/vmx/vmx.h +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/vmx/vmx.h @@ -706,6 +706,11 @@ void dump_vmcs(struct kvm_vcpu *vcpu); +static inline int vmx_get_instr_info_reg(u32 vmx_instr_info) +{ + return (vmx_instr_info >> 3) & 0xf; +} + static inline int vmx_get_instr_info_reg2(u32 vmx_instr_info) { return (vmx_instr_info >> 28) & 0xf; --- linux-riscv-6.17-6.17.0.orig/arch/x86/kvm/x86.c +++ linux-riscv-6.17-6.17.0/arch/x86/kvm/x86.c @@ -367,6 +367,7 @@ MSR_AMD64_PERF_CNTR_GLOBAL_CTL, MSR_AMD64_PERF_CNTR_GLOBAL_STATUS, MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_CLR, + MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_SET, }; static u32 msrs_to_save[ARRAY_SIZE(msrs_to_save_base) + @@ -677,6 +678,12 @@ } EXPORT_SYMBOL_GPL(kvm_user_return_msr_update_cache); +u64 kvm_get_user_return_msr(unsigned int slot) +{ + return this_cpu_ptr(user_return_msrs)->values[slot].curr; +} +EXPORT_SYMBOL_GPL(kvm_get_user_return_msr); + static void drop_user_return_notifiers(void) { struct kvm_user_return_msrs *msrs = this_cpu_ptr(user_return_msrs); @@ -1572,10 +1579,10 @@ int kvm_emulate_rdpmc(struct kvm_vcpu *vcpu) { - u32 ecx = kvm_rcx_read(vcpu); + u32 pmc = kvm_rcx_read(vcpu); u64 data; - if (kvm_pmu_rdpmc(vcpu, ecx, &data)) { + if (kvm_pmu_rdpmc(vcpu, pmc, &data)) { kvm_inject_gp(vcpu, 0); return 1; } @@ -1990,6 +1997,15 @@ return complete_fast_msr_access(vcpu); } +static int complete_fast_rdmsr_imm(struct kvm_vcpu *vcpu) +{ + if (!vcpu->run->msr.error) + kvm_register_write(vcpu, vcpu->arch.cui_rdmsr_imm_reg, + vcpu->run->msr.data); + + return complete_fast_msr_access(vcpu); +} + static u64 kvm_msr_reason(int r) { switch (r) { @@ -2024,56 +2040,82 @@ return 1; } -int kvm_emulate_rdmsr(struct kvm_vcpu *vcpu) +static int __kvm_emulate_rdmsr(struct kvm_vcpu *vcpu, u32 msr, int reg, + int (*complete_rdmsr)(struct kvm_vcpu *)) { - u32 ecx = kvm_rcx_read(vcpu); u64 data; int r; - r = kvm_get_msr_with_filter(vcpu, ecx, &data); - + r = kvm_get_msr_with_filter(vcpu, msr, &data); if (!r) { - trace_kvm_msr_read(ecx, data); + trace_kvm_msr_read(msr, data); - kvm_rax_write(vcpu, data & -1u); - kvm_rdx_write(vcpu, (data >> 32) & -1u); + if (reg < 0) { + kvm_rax_write(vcpu, data & -1u); + kvm_rdx_write(vcpu, (data >> 32) & -1u); + } else { + kvm_register_write(vcpu, reg, data); + } } else { /* MSR read failed? See if we should ask user space */ - if (kvm_msr_user_space(vcpu, ecx, KVM_EXIT_X86_RDMSR, 0, - complete_fast_rdmsr, r)) + if (kvm_msr_user_space(vcpu, msr, KVM_EXIT_X86_RDMSR, 0, + complete_rdmsr, r)) return 0; - trace_kvm_msr_read_ex(ecx); + trace_kvm_msr_read_ex(msr); } return kvm_x86_call(complete_emulated_msr)(vcpu, r); } + +int kvm_emulate_rdmsr(struct kvm_vcpu *vcpu) +{ + return __kvm_emulate_rdmsr(vcpu, kvm_rcx_read(vcpu), -1, + complete_fast_rdmsr); +} EXPORT_SYMBOL_GPL(kvm_emulate_rdmsr); -int kvm_emulate_wrmsr(struct kvm_vcpu *vcpu) +int kvm_emulate_rdmsr_imm(struct kvm_vcpu *vcpu, u32 msr, int reg) { - u32 ecx = kvm_rcx_read(vcpu); - u64 data = kvm_read_edx_eax(vcpu); - int r; + vcpu->arch.cui_rdmsr_imm_reg = reg; + + return __kvm_emulate_rdmsr(vcpu, msr, reg, complete_fast_rdmsr_imm); +} +EXPORT_SYMBOL_GPL(kvm_emulate_rdmsr_imm); - r = kvm_set_msr_with_filter(vcpu, ecx, data); +static int __kvm_emulate_wrmsr(struct kvm_vcpu *vcpu, u32 msr, u64 data) +{ + int r; + r = kvm_set_msr_with_filter(vcpu, msr, data); if (!r) { - trace_kvm_msr_write(ecx, data); + trace_kvm_msr_write(msr, data); } else { /* MSR write failed? See if we should ask user space */ - if (kvm_msr_user_space(vcpu, ecx, KVM_EXIT_X86_WRMSR, data, + if (kvm_msr_user_space(vcpu, msr, KVM_EXIT_X86_WRMSR, data, complete_fast_msr_access, r)) return 0; /* Signal all other negative errors to userspace */ if (r < 0) return r; - trace_kvm_msr_write_ex(ecx, data); + trace_kvm_msr_write_ex(msr, data); } return kvm_x86_call(complete_emulated_msr)(vcpu, r); } + +int kvm_emulate_wrmsr(struct kvm_vcpu *vcpu) +{ + return __kvm_emulate_wrmsr(vcpu, kvm_rcx_read(vcpu), + kvm_read_edx_eax(vcpu)); +} EXPORT_SYMBOL_GPL(kvm_emulate_wrmsr); +int kvm_emulate_wrmsr_imm(struct kvm_vcpu *vcpu, u32 msr, int reg) +{ + return __kvm_emulate_wrmsr(vcpu, msr, kvm_register_read(vcpu, reg)); +} +EXPORT_SYMBOL_GPL(kvm_emulate_wrmsr_imm); + int kvm_emulate_as_nop(struct kvm_vcpu *vcpu) { return kvm_skip_emulated_instruction(vcpu); @@ -7353,6 +7395,7 @@ case MSR_AMD64_PERF_CNTR_GLOBAL_CTL: case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS: case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_CLR: + case MSR_AMD64_PERF_CNTR_GLOBAL_STATUS_SET: if (!kvm_cpu_cap_has(X86_FEATURE_PERFMON_V2)) return; break; @@ -8470,11 +8513,6 @@ return is_smm(emul_to_vcpu(ctxt)); } -static bool emulator_is_guest_mode(struct x86_emulate_ctxt *ctxt) -{ - return is_guest_mode(emul_to_vcpu(ctxt)); -} - #ifndef CONFIG_KVM_SMM static int emulator_leave_smm(struct x86_emulate_ctxt *ctxt) { @@ -8558,7 +8596,6 @@ .guest_cpuid_is_intel_compatible = emulator_guest_cpuid_is_intel_compatible, .set_nmi_mask = emulator_set_nmi_mask, .is_smm = emulator_is_smm, - .is_guest_mode = emulator_is_guest_mode, .leave_smm = emulator_leave_smm, .triple_fault = emulator_triple_fault, .set_xcr = emulator_set_xcr, @@ -8984,6 +9021,23 @@ return false; } +static bool is_soft_int_instruction(struct x86_emulate_ctxt *ctxt, + int emulation_type) +{ + u8 vector = EMULTYPE_GET_SOFT_INT_VECTOR(emulation_type); + + switch (ctxt->b) { + case 0xcc: + return vector == BP_VECTOR; + case 0xcd: + return vector == ctxt->src.val; + case 0xce: + return vector == OF_VECTOR; + default: + return false; + } +} + /* * Decode an instruction for emulation. The caller is responsible for handling * code breakpoints. Note, manually detecting code breakpoints is unnecessary @@ -9094,6 +9148,10 @@ * injecting single-step #DBs. */ if (emulation_type & EMULTYPE_SKIP) { + if (emulation_type & EMULTYPE_SKIP_SOFT_INT && + !is_soft_int_instruction(ctxt, emulation_type)) + return 0; + if (ctxt->mode != X86EMUL_MODE_PROT64) ctxt->eip = (u32)ctxt->_eip; else @@ -9143,7 +9201,14 @@ ctxt->exception.address = 0; } - r = x86_emulate_insn(ctxt); + /* + * Check L1's instruction intercepts when emulating instructions for + * L2, unless KVM is re-emulating a previously decoded instruction, + * e.g. to complete userspace I/O, in which case KVM has already + * checked the intercepts. + */ + r = x86_emulate_insn(ctxt, is_guest_mode(vcpu) && + !(emulation_type & EMULTYPE_NO_DECODE)); if (r == EMULATION_INTERCEPTED) return 1; --- linux-riscv-6.17-6.17.0.orig/arch/x86/mm/tlb.c +++ linux-riscv-6.17-6.17.0/arch/x86/mm/tlb.c @@ -911,11 +911,31 @@ * CR3 and cpu_tlbstate.loaded_mm are not all in sync. */ this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING); - barrier(); - /* Start receiving IPIs and then read tlb_gen (and LAM below) */ + /* + * Make sure this CPU is set in mm_cpumask() such that we'll + * receive invalidation IPIs. + * + * Rely on the smp_mb() implied by cpumask_set_cpu()'s atomic + * operation, or explicitly provide one. Such that: + * + * switch_mm_irqs_off() flush_tlb_mm_range() + * smp_store_release(loaded_mm, SWITCHING); atomic64_inc_return(tlb_gen) + * smp_mb(); // here // smp_mb() implied + * atomic64_read(tlb_gen); this_cpu_read(loaded_mm); + * + * we properly order against flush_tlb_mm_range(), where the + * loaded_mm load can happen in mative_flush_tlb_multi() -> + * should_flush_tlb(). + * + * This way switch_mm() must see the new tlb_gen or + * flush_tlb_mm_range() must see the new loaded_mm, or both. + */ if (next != &init_mm && !cpumask_test_cpu(cpu, mm_cpumask(next))) cpumask_set_cpu(cpu, mm_cpumask(next)); + else + smp_mb(); + next_tlb_gen = atomic64_read(&next->context.tlb_gen); ns = choose_new_asid(next, next_tlb_gen); --- linux-riscv-6.17-6.17.0.orig/arch/x86/net/bpf_jit_comp.c +++ linux-riscv-6.17-6.17.0/arch/x86/net/bpf_jit_comp.c @@ -2592,7 +2592,7 @@ /* Update cleanup_addr */ ctx->cleanup_addr = proglen; if (bpf_prog_was_classic(bpf_prog) && - !capable(CAP_SYS_ADMIN)) { + !ns_capable_noaudit(&init_user_ns, CAP_SYS_ADMIN)) { u8 *ip = image + addrs[i - 1]; if (emit_spectre_bhb_barrier(&prog, ip, bpf_prog)) --- linux-riscv-6.17-6.17.0.orig/arch/x86/pci/common.c +++ linux-riscv-6.17-6.17.0/arch/x86/pci/common.c @@ -34,6 +34,7 @@ #endif int pcibios_last_bus = -1; unsigned long pirq_table_addr; +unsigned int pci_early_clear_msi; const struct pci_raw_ops *__read_mostly raw_pci_ops; const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; @@ -614,6 +615,9 @@ } else if (!strcmp(str, "skip_isa_align")) { pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; return NULL; + } else if (!strcmp(str, "clearmsi")) { + pci_early_clear_msi = 1; + return NULL; } else if (!strcmp(str, "noioapicquirk")) { noioapicquirk = 1; return NULL; --- linux-riscv-6.17-6.17.0.orig/arch/x86/pci/early.c +++ linux-riscv-6.17-6.17.0/arch/x86/pci/early.c @@ -51,6 +51,31 @@ outw(val, 0xcfc + (offset&2)); } +u32 pci_early_find_cap(int bus, int slot, int func, int cap) +{ + int bytes; + u8 pos; + + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos = read_pci_config_byte(bus, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + int early_pci_allowed(void) { return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == --- linux-riscv-6.17-6.17.0.orig/arch/x86/video/video-common.c +++ linux-riscv-6.17-6.17.0/arch/x86/video/video-common.c @@ -9,6 +9,7 @@ #include #include +#include #include #include @@ -27,6 +28,11 @@ bool video_is_primary_device(struct device *dev) { +#ifdef CONFIG_SCREEN_INFO + struct screen_info *si = &screen_info; + struct resource res[SCREEN_INFO_MAX_RESOURCES]; + ssize_t i, numres; +#endif struct pci_dev *pdev; if (!dev_is_pci(dev)) @@ -34,7 +40,24 @@ pdev = to_pci_dev(dev); - return (pdev == vga_default_device()); + if (!pci_is_display(pdev)) + return false; + + if (pdev == vga_default_device()) + return true; + +#ifdef CONFIG_SCREEN_INFO + numres = screen_info_resources(si, res, ARRAY_SIZE(res)); + for (i = 0; i < numres; ++i) { + if (!(res[i].flags & IORESOURCE_MEM)) + continue; + + if (pci_find_resource(pdev, &res[i])) + return true; + } +#endif + + return false; } EXPORT_SYMBOL(video_is_primary_device); --- linux-riscv-6.17-6.17.0.orig/arch/x86/virt/vmx/tdx/tdx.c +++ linux-riscv-6.17-6.17.0/arch/x86/virt/vmx/tdx/tdx.c @@ -1266,7 +1266,7 @@ return false; /* Get page type from the TDX module */ - sret = __seamcall_ret(TDH_PHYMEM_PAGE_RDMD, &args); + sret = __seamcall_dirty_cache(__seamcall_ret, TDH_PHYMEM_PAGE_RDMD, &args); /* * The SEAMCALL will not return success unless there is a @@ -1502,11 +1502,6 @@ return page_to_phys(td->tdr_page); } -static inline u64 tdx_tdvpr_pa(struct tdx_vp *td) -{ - return page_to_phys(td->tdvpr_page); -} - /* * The TDX module exposes a CLFLUSH_BEFORE_ALLOC bit to specify whether * a CLFLUSH of pages is required before handing them to the TDX module. @@ -1518,11 +1513,11 @@ clflush_cache_range(page_to_virt(page), PAGE_SIZE); } -noinstr __flatten u64 tdh_vp_enter(struct tdx_vp *td, struct tdx_module_args *args) +noinstr u64 tdh_vp_enter(struct tdx_vp *td, struct tdx_module_args *args) { - args->rcx = tdx_tdvpr_pa(td); + args->rcx = td->tdvpr_pa; - return __seamcall_saved_ret(TDH_VP_ENTER, args); + return __seamcall_dirty_cache(__seamcall_saved_ret, TDH_VP_ENTER, args); } EXPORT_SYMBOL_GPL(tdh_vp_enter); @@ -1581,7 +1576,7 @@ { struct tdx_module_args args = { .rcx = page_to_phys(tdcx_page), - .rdx = tdx_tdvpr_pa(vp), + .rdx = vp->tdvpr_pa, }; tdx_clflush_page(tdcx_page); @@ -1650,7 +1645,7 @@ u64 tdh_vp_create(struct tdx_td *td, struct tdx_vp *vp) { struct tdx_module_args args = { - .rcx = tdx_tdvpr_pa(vp), + .rcx = vp->tdvpr_pa, .rdx = tdx_tdr_pa(td), }; @@ -1706,7 +1701,7 @@ u64 tdh_vp_flush(struct tdx_vp *vp) { struct tdx_module_args args = { - .rcx = tdx_tdvpr_pa(vp), + .rcx = vp->tdvpr_pa, }; return seamcall(TDH_VP_FLUSH, &args); @@ -1752,7 +1747,7 @@ u64 tdh_vp_rd(struct tdx_vp *vp, u64 field, u64 *data) { struct tdx_module_args args = { - .rcx = tdx_tdvpr_pa(vp), + .rcx = vp->tdvpr_pa, .rdx = field, }; u64 ret; @@ -1769,7 +1764,7 @@ u64 tdh_vp_wr(struct tdx_vp *vp, u64 field, u64 data, u64 mask) { struct tdx_module_args args = { - .rcx = tdx_tdvpr_pa(vp), + .rcx = vp->tdvpr_pa, .rdx = field, .r8 = data, .r9 = mask, @@ -1782,7 +1777,7 @@ u64 tdh_vp_init(struct tdx_vp *vp, u64 initial_rcx, u32 x2apicid) { struct tdx_module_args args = { - .rcx = tdx_tdvpr_pa(vp), + .rcx = vp->tdvpr_pa, .rdx = initial_rcx, .r8 = x2apicid, }; @@ -1870,3 +1865,22 @@ return seamcall(TDH_PHYMEM_PAGE_WBINVD, &args); } EXPORT_SYMBOL_GPL(tdh_phymem_page_wbinvd_hkid); + +#ifdef CONFIG_KEXEC_CORE +void tdx_cpu_flush_cache_for_kexec(void) +{ + lockdep_assert_preemption_disabled(); + + if (!this_cpu_read(cache_state_incoherent)) + return; + + /* + * Private memory cachelines need to be clean at the time of + * kexec. Write them back now, as the caller promises that + * there should be no more SEAMCALLs on this CPU. + */ + wbinvd(); + this_cpu_write(cache_state_incoherent, false); +} +EXPORT_SYMBOL_GPL(tdx_cpu_flush_cache_for_kexec); +#endif --- linux-riscv-6.17-6.17.0.orig/arch/xtensa/kernel/asm-offsets.c +++ linux-riscv-6.17-6.17.0/arch/xtensa/kernel/asm-offsets.c @@ -11,6 +11,7 @@ * * Chris Zankel */ +#define COMPILE_OFFSETS #include #include --- linux-riscv-6.17-6.17.0.orig/arch/xtensa/kernel/process.c +++ linux-riscv-6.17-6.17.0/arch/xtensa/kernel/process.c @@ -267,7 +267,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) { - unsigned long clone_flags = args->flags; + u64 clone_flags = args->flags; unsigned long usp_thread_fn = args->stack; unsigned long tls = args->tls; struct pt_regs *childregs = task_pt_regs(p); --- linux-riscv-6.17-6.17.0.orig/arch/xtensa/platforms/iss/simdisk.c +++ linux-riscv-6.17-6.17.0/arch/xtensa/platforms/iss/simdisk.c @@ -231,10 +231,14 @@ static ssize_t proc_write_simdisk(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - char *tmp = memdup_user_nul(buf, count); + char *tmp; struct simdisk *dev = pde_data(file_inode(file)); int err; + if (count == 0 || count > PAGE_SIZE) + return -EINVAL; + + tmp = memdup_user_nul(buf, count); if (IS_ERR(tmp)) return PTR_ERR(tmp); --- linux-riscv-6.17-6.17.0.orig/block/bfq-iosched.c +++ linux-riscv-6.17-6.17.0/block/bfq-iosched.c @@ -7109,9 +7109,10 @@ * See the comments on bfq_limit_depth for the purpose of * the depths set in the function. Return minimum shallow depth we'll use. */ -static void bfq_update_depths(struct bfq_data *bfqd, struct sbitmap_queue *bt) +static void bfq_depth_updated(struct request_queue *q) { - unsigned int nr_requests = bfqd->queue->nr_requests; + struct bfq_data *bfqd = q->elevator->elevator_data; + unsigned int nr_requests = q->nr_requests; /* * In-word depths if no bfq_queue is being weight-raised: @@ -7143,21 +7144,8 @@ bfqd->async_depths[1][0] = max((nr_requests * 3) >> 4, 1U); /* no more than ~37% of tags for sync writes (~20% extra tags) */ bfqd->async_depths[1][1] = max((nr_requests * 6) >> 4, 1U); -} - -static void bfq_depth_updated(struct blk_mq_hw_ctx *hctx) -{ - struct bfq_data *bfqd = hctx->queue->elevator->elevator_data; - struct blk_mq_tags *tags = hctx->sched_tags; - bfq_update_depths(bfqd, &tags->bitmap_tags); - sbitmap_queue_min_shallow_depth(&tags->bitmap_tags, 1); -} - -static int bfq_init_hctx(struct blk_mq_hw_ctx *hctx, unsigned int index) -{ - bfq_depth_updated(hctx); - return 0; + blk_mq_set_min_shallow_depth(q, 1); } static void bfq_exit_queue(struct elevator_queue *e) @@ -7369,6 +7357,7 @@ goto out_free; bfq_init_root_group(bfqd->root_group, bfqd); bfq_init_entity(&bfqd->oom_bfqq.entity, bfqd->root_group); + bfq_depth_updated(q); /* We dispatch from request queue wide instead of hw queue */ blk_queue_flag_set(QUEUE_FLAG_SQ_SCHED, q); @@ -7628,7 +7617,6 @@ .request_merged = bfq_request_merged, .has_work = bfq_has_work, .depth_updated = bfq_depth_updated, - .init_hctx = bfq_init_hctx, .init_sched = bfq_init_queue, .exit_sched = bfq_exit_queue, }, --- linux-riscv-6.17-6.17.0.orig/block/bio.c +++ linux-riscv-6.17-6.17.0/block/bio.c @@ -261,7 +261,7 @@ bio->bi_private = NULL; #ifdef CONFIG_BLK_CGROUP bio->bi_blkg = NULL; - bio->bi_issue.value = 0; + bio->issue_time_ns = 0; if (bdev) bio_associate_blkg(bio); #ifdef CONFIG_BLK_CGROUP_IOCOST --- linux-riscv-6.17-6.17.0.orig/block/blk-cgroup.c +++ linux-riscv-6.17-6.17.0/block/blk-cgroup.c @@ -110,12 +110,6 @@ return task_css(current, io_cgrp_id); } -static bool blkcg_policy_enabled(struct request_queue *q, - const struct blkcg_policy *pol) -{ - return pol && test_bit(pol->plid, q->blkcg_pols); -} - static void blkg_free_workfn(struct work_struct *work) { struct blkcg_gq *blkg = container_of(work, struct blkcg_gq, @@ -818,8 +812,7 @@ } /* * Similar to blkg_conf_open_bdev, but additionally freezes the queue, - * acquires q->elevator_lock, and ensures the correct locking order - * between q->elevator_lock and q->rq_qos_mutex. + * ensures the correct locking order between freeze queue and q->rq_qos_mutex. * * This function returns negative error on failure. On success it returns * memflags which must be saved and later passed to blkg_conf_exit_frozen @@ -840,13 +833,11 @@ * At this point, we haven’t started protecting anything related to QoS, * so we release q->rq_qos_mutex here, which was first acquired in blkg_ * conf_open_bdev. Later, we re-acquire q->rq_qos_mutex after freezing - * the queue and acquiring q->elevator_lock to maintain the correct - * locking order. + * the queue to maintain the correct locking order. */ mutex_unlock(&ctx->bdev->bd_queue->rq_qos_mutex); memflags = blk_mq_freeze_queue(ctx->bdev->bd_queue); - mutex_lock(&ctx->bdev->bd_queue->elevator_lock); mutex_lock(&ctx->bdev->bd_queue->rq_qos_mutex); return memflags; @@ -883,14 +874,8 @@ disk = ctx->bdev->bd_disk; q = disk->queue; - /* - * blkcg_deactivate_policy() requires queue to be frozen, we can grab - * q_usage_counter to prevent concurrent with blkcg_deactivate_policy(). - */ - ret = blk_queue_enter(q, 0); - if (ret) - goto fail; - + /* Prevent concurrent with blkcg_deactivate_policy() */ + mutex_lock(&q->blkcg_mutex); spin_lock_irq(&q->queue_lock); if (!blkcg_policy_enabled(q, pol)) { @@ -920,16 +905,16 @@ /* Drop locks to do new blkg allocation with GFP_KERNEL. */ spin_unlock_irq(&q->queue_lock); - new_blkg = blkg_alloc(pos, disk, GFP_KERNEL); + new_blkg = blkg_alloc(pos, disk, GFP_NOIO); if (unlikely(!new_blkg)) { ret = -ENOMEM; - goto fail_exit_queue; + goto fail_exit; } if (radix_tree_preload(GFP_KERNEL)) { blkg_free(new_blkg); ret = -ENOMEM; - goto fail_exit_queue; + goto fail_exit; } spin_lock_irq(&q->queue_lock); @@ -957,7 +942,7 @@ goto success; } success: - blk_queue_exit(q); + mutex_unlock(&q->blkcg_mutex); ctx->blkg = blkg; return 0; @@ -965,9 +950,8 @@ radix_tree_preload_end(); fail_unlock: spin_unlock_irq(&q->queue_lock); -fail_exit_queue: - blk_queue_exit(q); -fail: +fail_exit: + mutex_unlock(&q->blkcg_mutex); /* * If queue was bypassing, we should retry. Do so after a * short msleep(). It isn't strictly necessary but queue @@ -1008,9 +992,8 @@ EXPORT_SYMBOL_GPL(blkg_conf_exit); /* - * Similar to blkg_conf_exit, but also unfreezes the queue and releases - * q->elevator_lock. Should be used when blkg_conf_open_bdev_frozen - * is used to open the bdev. + * Similar to blkg_conf_exit, but also unfreezes the queue. Should be used + * when blkg_conf_open_bdev_frozen is used to open the bdev. */ void blkg_conf_exit_frozen(struct blkg_conf_ctx *ctx, unsigned long memflags) { @@ -1018,7 +1001,6 @@ struct request_queue *q = ctx->bdev->bd_queue; blkg_conf_exit(ctx); - mutex_unlock(&q->elevator_lock); blk_mq_unfreeze_queue(q, memflags); } } --- linux-riscv-6.17-6.17.0.orig/block/blk-cgroup.h +++ linux-riscv-6.17-6.17.0/block/blk-cgroup.h @@ -370,11 +370,6 @@ if (((d_blkg) = blkg_lookup(css_to_blkcg(pos_css), \ (p_blkg)->q))) -static inline void blkcg_bio_issue_init(struct bio *bio) -{ - bio_issue_init(&bio->bi_issue, bio_sectors(bio)); -} - static inline void blkcg_use_delay(struct blkcg_gq *blkg) { if (WARN_ON_ONCE(atomic_read(&blkg->use_delay) < 0)) @@ -459,6 +454,12 @@ bio_issue_as_root_blkg(rq->bio) == bio_issue_as_root_blkg(bio); } +static inline bool blkcg_policy_enabled(struct request_queue *q, + const struct blkcg_policy *pol) +{ + return pol && test_bit(pol->plid, q->blkcg_pols); +} + void blk_cgroup_bio_start(struct bio *bio); void blkcg_add_delay(struct blkcg_gq *blkg, u64 now, u64 delta); #else /* CONFIG_BLK_CGROUP */ @@ -491,7 +492,6 @@ static inline struct blkcg_gq *pd_to_blkg(struct blkg_policy_data *pd) { return NULL; } static inline void blkg_get(struct blkcg_gq *blkg) { } static inline void blkg_put(struct blkcg_gq *blkg) { } -static inline void blkcg_bio_issue_init(struct bio *bio) { } static inline void blk_cgroup_bio_start(struct bio *bio) { } static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio) { return true; } --- linux-riscv-6.17-6.17.0.orig/block/blk-core.c +++ linux-riscv-6.17-6.17.0/block/blk-core.c @@ -539,7 +539,7 @@ } } -static noinline int should_fail_bio(struct bio *bio) +int should_fail_bio(struct bio *bio) { if (should_fail_request(bdev_whole(bio->bi_bdev), bio->bi_iter.bi_size)) return -EIO; @@ -727,10 +727,9 @@ current->bio_list = NULL; } -void submit_bio_noacct_nocheck(struct bio *bio) +void submit_bio_noacct_nocheck(struct bio *bio, bool split) { blk_cgroup_bio_start(bio); - blkcg_bio_issue_init(bio); if (!bio_flagged(bio, BIO_TRACE_COMPLETION)) { trace_block_bio_queue(bio); @@ -747,12 +746,16 @@ * to collect a list of requests submited by a ->submit_bio method while * it is active, and then process them after it returned. */ - if (current->bio_list) - bio_list_add(¤t->bio_list[0], bio); - else if (!bdev_test_flag(bio->bi_bdev, BD_HAS_SUBMIT_BIO)) + if (current->bio_list) { + if (split) + bio_list_add_head(¤t->bio_list[0], bio); + else + bio_list_add(¤t->bio_list[0], bio); + } else if (!bdev_test_flag(bio->bi_bdev, BD_HAS_SUBMIT_BIO)) { __submit_bio_noacct_mq(bio); - else + } else { __submit_bio_noacct(bio); + } } static blk_status_t blk_validate_atomic_write_op_size(struct request_queue *q, @@ -873,7 +876,7 @@ if (blk_throtl_bio(bio)) return; - submit_bio_noacct_nocheck(bio); + submit_bio_noacct_nocheck(bio, false); return; not_supported: --- linux-riscv-6.17-6.17.0.orig/block/blk-crypto-fallback.c +++ linux-riscv-6.17-6.17.0/block/blk-crypto-fallback.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "blk-cgroup.h" #include "blk-crypto-internal.h" @@ -231,7 +232,9 @@ bio->bi_status = BLK_STS_RESOURCE; return false; } + bio_chain(split_bio, bio); + trace_block_split(split_bio, bio->bi_iter.bi_sector); submit_bio_noacct(bio); *bio_ptr = split_bio; } --- linux-riscv-6.17-6.17.0.orig/block/blk-crypto.c +++ linux-riscv-6.17-6.17.0/block/blk-crypto.c @@ -292,7 +292,7 @@ } if (!bio_crypt_check_alignment(bio)) { - bio->bi_status = BLK_STS_IOERR; + bio->bi_status = BLK_STS_INVAL; goto fail; } --- linux-riscv-6.17-6.17.0.orig/block/blk-iolatency.c +++ linux-riscv-6.17-6.17.0/block/blk-iolatency.c @@ -485,19 +485,11 @@ mod_timer(&blkiolat->timer, jiffies + HZ); } -static void iolatency_record_time(struct iolatency_grp *iolat, - struct bio_issue *issue, u64 now, - bool issue_as_root) +static void iolatency_record_time(struct iolatency_grp *iolat, u64 start, + u64 now, bool issue_as_root) { - u64 start = bio_issue_time(issue); u64 req_time; - /* - * Have to do this so we are truncated to the correct time that our - * issue is truncated to. - */ - now = __bio_issue_time(now); - if (now <= start) return; @@ -625,7 +617,7 @@ * submitted, so do not account for it. */ if (iolat->min_lat_nsec && bio->bi_status != BLK_STS_AGAIN) { - iolatency_record_time(iolat, &bio->bi_issue, now, + iolatency_record_time(iolat, bio->issue_time_ns, now, issue_as_root); window_start = atomic64_read(&iolat->window_start); if (now > window_start && --- linux-riscv-6.17-6.17.0.orig/block/blk-lib.c +++ linux-riscv-6.17-6.17.0/block/blk-lib.c @@ -200,13 +200,13 @@ unsigned int nr_vecs = __blkdev_sectors_to_bio_pages(nr_sects); struct bio *bio; - bio = bio_alloc(bdev, nr_vecs, REQ_OP_WRITE, gfp_mask); - bio->bi_iter.bi_sector = sector; - if ((flags & BLKDEV_ZERO_KILLABLE) && fatal_signal_pending(current)) break; + bio = bio_alloc(bdev, nr_vecs, REQ_OP_WRITE, gfp_mask); + bio->bi_iter.bi_sector = sector; + do { unsigned int len, added; --- linux-riscv-6.17-6.17.0.orig/block/blk-map.c +++ linux-riscv-6.17-6.17.0/block/blk-map.c @@ -443,7 +443,7 @@ int ret; /* check that the data layout matches the hardware restrictions */ - ret = bio_split_rw_at(bio, lim, &nr_segs, max_bytes); + ret = bio_split_io_at(bio, lim, &nr_segs, max_bytes, 0); if (ret) { /* if we would have to split the bio, copy instead */ if (ret > 0) --- linux-riscv-6.17-6.17.0.orig/block/blk-merge.c +++ linux-riscv-6.17-6.17.0/block/blk-merge.c @@ -104,34 +104,58 @@ return round_down(UINT_MAX, lim->logical_block_size) >> SECTOR_SHIFT; } +/* + * bio_submit_split_bioset - Submit a bio, splitting it at a designated sector + * @bio: the original bio to be submitted and split + * @split_sectors: the sector count at which to split + * @bs: the bio set used for allocating the new split bio + * + * The original bio is modified to contain the remaining sectors and submitted. + * The caller is responsible for submitting the returned bio. + * + * If succeed, the newly allocated bio representing the initial part will be + * returned, on failure NULL will be returned and original bio will fail. + */ +struct bio *bio_submit_split_bioset(struct bio *bio, unsigned int split_sectors, + struct bio_set *bs) +{ + struct bio *split = bio_split(bio, split_sectors, GFP_NOIO, bs); + + if (IS_ERR(split)) { + bio->bi_status = errno_to_blk_status(PTR_ERR(split)); + bio_endio(bio); + return NULL; + } + + bio_chain(split, bio); + trace_block_split(split, bio->bi_iter.bi_sector); + WARN_ON_ONCE(bio_zone_write_plugging(bio)); + + if (should_fail_bio(bio)) + bio_io_error(bio); + else if (!blk_throtl_bio(bio)) + submit_bio_noacct_nocheck(bio, true); + + return split; +} +EXPORT_SYMBOL_GPL(bio_submit_split_bioset); + static struct bio *bio_submit_split(struct bio *bio, int split_sectors) { - if (unlikely(split_sectors < 0)) - goto error; + if (unlikely(split_sectors < 0)) { + bio->bi_status = errno_to_blk_status(split_sectors); + bio_endio(bio); + return NULL; + } if (split_sectors) { - struct bio *split; - - split = bio_split(bio, split_sectors, GFP_NOIO, + bio = bio_submit_split_bioset(bio, split_sectors, &bio->bi_bdev->bd_disk->bio_split); - if (IS_ERR(split)) { - split_sectors = PTR_ERR(split); - goto error; - } - split->bi_opf |= REQ_NOMERGE; - blkcg_bio_issue_init(split); - bio_chain(split, bio); - trace_block_split(split, bio->bi_iter.bi_sector); - WARN_ON_ONCE(bio_zone_write_plugging(bio)); - submit_bio_noacct(bio); - return split; + if (bio) + bio->bi_opf |= REQ_NOMERGE; } return bio; -error: - bio->bi_status = errno_to_blk_status(split_sectors); - bio_endio(bio); - return NULL; } struct bio *bio_split_discard(struct bio *bio, const struct queue_limits *lim, @@ -279,25 +303,30 @@ } /** - * bio_split_rw_at - check if and where to split a read/write bio + * bio_split_io_at - check if and where to split a bio * @bio: [in] bio to be split * @lim: [in] queue limits to split based on * @segs: [out] number of segments in the bio with the first half of the sectors * @max_bytes: [in] maximum number of bytes per bio + * @len_align_mask: [in] length alignment mask for each vector * * Find out if @bio needs to be split to fit the queue limits in @lim and a * maximum size of @max_bytes. Returns a negative error number if @bio can't be * split, 0 if the bio doesn't have to be split, or a positive sector offset if * @bio needs to be split. */ -int bio_split_rw_at(struct bio *bio, const struct queue_limits *lim, - unsigned *segs, unsigned max_bytes) +int bio_split_io_at(struct bio *bio, const struct queue_limits *lim, + unsigned *segs, unsigned max_bytes, unsigned len_align_mask) { struct bio_vec bv, bvprv, *bvprvp = NULL; struct bvec_iter iter; unsigned nsegs = 0, bytes = 0; bio_for_each_bvec(bv, bio, iter) { + if (bv.bv_offset & lim->dma_alignment || + bv.bv_len & len_align_mask) + return -EINVAL; + /* * If the queue doesn't support SG gaps and adding this * offset would create a gap, disallow it. @@ -339,8 +368,16 @@ * Individual bvecs might not be logical block aligned. Round down the * split size so that each bio is properly block size aligned, even if * we do not use the full hardware limits. + * + * It is possible to submit a bio that can't be split into a valid io: + * there may either be too many discontiguous vectors for the max + * segments limit, or contain virtual boundary gaps without having a + * valid block sized split. A zero byte result means one of those + * conditions occured. */ bytes = ALIGN_DOWN(bytes, bio_split_alignment(bio, lim)); + if (!bytes) + return -EINVAL; /* * Bio splitting may cause subtle trouble such as hang when doing sync @@ -350,7 +387,7 @@ bio_clear_polled(bio); return bytes >> SECTOR_SHIFT; } -EXPORT_SYMBOL_GPL(bio_split_rw_at); +EXPORT_SYMBOL_GPL(bio_split_io_at); struct bio *bio_split_rw(struct bio *bio, const struct queue_limits *lim, unsigned *nr_segs) --- linux-riscv-6.17-6.17.0.orig/block/blk-mq-sched.c +++ linux-riscv-6.17-6.17.0/block/blk-mq-sched.c @@ -454,7 +454,7 @@ } struct elevator_tags *blk_mq_alloc_sched_tags(struct blk_mq_tag_set *set, - unsigned int nr_hw_queues) + unsigned int nr_hw_queues, unsigned int nr_requests) { unsigned int nr_tags; int i; @@ -470,13 +470,8 @@ nr_tags * sizeof(struct blk_mq_tags *), gfp); if (!et) return NULL; - /* - * Default to double of smaller one between hw queue_depth and - * 128, since we don't split into sync/async like the old code - * did. Additionally, this is a per-hw queue depth. - */ - et->nr_requests = 2 * min_t(unsigned int, set->queue_depth, - BLKDEV_DEFAULT_RQ); + + et->nr_requests = nr_requests; et->nr_hw_queues = nr_hw_queues; if (blk_mq_is_shared_tags(set->flags)) { @@ -521,7 +516,8 @@ * concurrently. */ if (q->elevator) { - et = blk_mq_alloc_sched_tags(set, nr_hw_queues); + et = blk_mq_alloc_sched_tags(set, nr_hw_queues, + blk_mq_default_nr_requests(set)); if (!et) goto out_unwind; if (xa_insert(et_table, q->id, et, gfp)) @@ -561,7 +557,7 @@ if (blk_mq_is_shared_tags(flags)) { /* Shared tags are stored at index 0 in @et->tags. */ q->sched_shared_tags = et->tags[0]; - blk_mq_tag_update_sched_shared_tags(q); + blk_mq_tag_update_sched_shared_tags(q, et->nr_requests); } queue_for_each_hw_ctx(q, hctx, i) { --- linux-riscv-6.17-6.17.0.orig/block/blk-mq-sched.h +++ linux-riscv-6.17-6.17.0/block/blk-mq-sched.h @@ -24,7 +24,7 @@ void blk_mq_sched_free_rqs(struct request_queue *q); struct elevator_tags *blk_mq_alloc_sched_tags(struct blk_mq_tag_set *set, - unsigned int nr_hw_queues); + unsigned int nr_hw_queues, unsigned int nr_requests); int blk_mq_alloc_sched_tags_batch(struct xarray *et_table, struct blk_mq_tag_set *set, unsigned int nr_hw_queues); void blk_mq_free_sched_tags(struct elevator_tags *et, @@ -92,4 +92,15 @@ return test_bit(BLK_MQ_S_SCHED_RESTART, &hctx->state); } +static inline void blk_mq_set_min_shallow_depth(struct request_queue *q, + unsigned int depth) +{ + struct blk_mq_hw_ctx *hctx; + unsigned long i; + + queue_for_each_hw_ctx(q, hctx, i) + sbitmap_queue_min_shallow_depth(&hctx->sched_tags->bitmap_tags, + depth); +} + #endif --- linux-riscv-6.17-6.17.0.orig/block/blk-mq-sysfs.c +++ linux-riscv-6.17-6.17.0/block/blk-mq-sysfs.c @@ -150,9 +150,11 @@ return; hctx_for_each_ctx(hctx, ctx, i) - kobject_del(&ctx->kobj); + if (ctx->kobj.state_in_sysfs) + kobject_del(&ctx->kobj); - kobject_del(&hctx->kobj); + if (hctx->kobj.state_in_sysfs) + kobject_del(&hctx->kobj); } static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx) --- linux-riscv-6.17-6.17.0.orig/block/blk-mq-tag.c +++ linux-riscv-6.17-6.17.0/block/blk-mq-tag.c @@ -584,14 +584,10 @@ } int blk_mq_tag_update_depth(struct blk_mq_hw_ctx *hctx, - struct blk_mq_tags **tagsptr, unsigned int tdepth, - bool can_grow) + struct blk_mq_tags **tagsptr, unsigned int tdepth) { struct blk_mq_tags *tags = *tagsptr; - if (tdepth <= tags->nr_reserved_tags) - return -EINVAL; - /* * If we are allowed to grow beyond the original size, allocate * a new set of tags before freeing the old one. @@ -600,28 +596,12 @@ struct blk_mq_tag_set *set = hctx->queue->tag_set; struct blk_mq_tags *new; - if (!can_grow) - return -EINVAL; - - /* - * We need some sort of upper limit, set it high enough that - * no valid use cases should require more. - */ - if (tdepth > MAX_SCHED_RQ) - return -EINVAL; - - /* - * Only the sbitmap needs resizing since we allocated the max - * initially. - */ - if (blk_mq_is_shared_tags(set->flags)) - return 0; - new = blk_mq_alloc_map_and_rqs(set, hctx->queue_num, tdepth); if (!new) return -ENOMEM; blk_mq_free_map_and_rqs(set, *tagsptr, hctx->queue_num); + hctx->queue->elevator->et->tags[hctx->queue_num] = new; *tagsptr = new; } else { /* @@ -642,10 +622,11 @@ sbitmap_queue_resize(&tags->bitmap_tags, size - set->reserved_tags); } -void blk_mq_tag_update_sched_shared_tags(struct request_queue *q) +void blk_mq_tag_update_sched_shared_tags(struct request_queue *q, + unsigned int nr) { sbitmap_queue_resize(&q->sched_shared_tags->bitmap_tags, - q->nr_requests - q->tag_set->reserved_tags); + nr - q->tag_set->reserved_tags); } /** --- linux-riscv-6.17-6.17.0.orig/block/blk-mq.c +++ linux-riscv-6.17-6.17.0/block/blk-mq.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -335,12 +336,12 @@ { struct request_queue *q; - mutex_lock(&set->tag_list_lock); - list_for_each_entry(q, &set->tag_list, tag_set_list) { + rcu_read_lock(); + list_for_each_entry_rcu(q, &set->tag_list, tag_set_list) { if (!blk_queue_skip_tagset_quiesce(q)) blk_mq_quiesce_queue_nowait(q); } - mutex_unlock(&set->tag_list_lock); + rcu_read_unlock(); blk_mq_wait_quiesce_done(set); } @@ -350,12 +351,12 @@ { struct request_queue *q; - mutex_lock(&set->tag_list_lock); - list_for_each_entry(q, &set->tag_list, tag_set_list) { + rcu_read_lock(); + list_for_each_entry_rcu(q, &set->tag_list, tag_set_list) { if (!blk_queue_skip_tagset_quiesce(q)) blk_mq_unquiesce_queue(q); } - mutex_unlock(&set->tag_list_lock); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(blk_mq_unquiesce_tagset); @@ -396,6 +397,13 @@ #endif } +static inline void blk_mq_bio_issue_init(struct bio *bio) +{ +#ifdef CONFIG_BLK_CGROUP + bio->issue_time_ns = blk_time_get_ns(); +#endif +} + static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, struct blk_mq_tags *tags, unsigned int tag) { @@ -3168,6 +3176,7 @@ if (!bio_integrity_prep(bio)) goto queue_exit; + blk_mq_bio_issue_init(bio); if (blk_mq_attempt_bio_merge(q, bio, nr_segs)) goto queue_exit; @@ -3713,6 +3722,7 @@ { struct blk_mq_hw_ctx *hctx = hlist_entry_safe(node, struct blk_mq_hw_ctx, cpuhp_online); + int ret = 0; if (blk_mq_hctx_has_online_cpu(hctx, cpu)) return 0; @@ -3733,12 +3743,24 @@ * frozen and there are no requests. */ if (percpu_ref_tryget(&hctx->queue->q_usage_counter)) { - while (blk_mq_hctx_has_requests(hctx)) + while (blk_mq_hctx_has_requests(hctx)) { + /* + * The wakeup capable IRQ handler of block device is + * not called during suspend. Skip the loop by checking + * pm_wakeup_pending to prevent the deadlock and improve + * suspend latency. + */ + if (pm_wakeup_pending()) { + clear_bit(BLK_MQ_S_INACTIVE, &hctx->state); + ret = -EBUSY; + break; + } msleep(5); + } percpu_ref_put(&hctx->queue->q_usage_counter); } - return 0; + return ret; } /* @@ -4295,7 +4317,7 @@ struct blk_mq_tag_set *set = q->tag_set; mutex_lock(&set->tag_list_lock); - list_del(&q->tag_set_list); + list_del_rcu(&q->tag_set_list); if (list_is_singular(&set->tag_list)) { /* just transitioned to unshared */ set->flags &= ~BLK_MQ_F_TAG_QUEUE_SHARED; @@ -4303,7 +4325,6 @@ blk_mq_update_tag_set_shared(set, false); } mutex_unlock(&set->tag_list_lock); - INIT_LIST_HEAD(&q->tag_set_list); } static void blk_mq_add_queue_tag_set(struct blk_mq_tag_set *set, @@ -4322,7 +4343,7 @@ } if (set->flags & BLK_MQ_F_TAG_QUEUE_SHARED) queue_set_hctx_shared(q, true); - list_add_tail(&q->tag_set_list, &set->tag_list); + list_add_tail_rcu(&q->tag_set_list, &set->tag_list); mutex_unlock(&set->tag_list_lock); } @@ -4917,57 +4938,59 @@ } EXPORT_SYMBOL(blk_mq_free_tag_set); -int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr) +struct elevator_tags *blk_mq_update_nr_requests(struct request_queue *q, + struct elevator_tags *et, + unsigned int nr) { struct blk_mq_tag_set *set = q->tag_set; + struct elevator_tags *old_et = NULL; struct blk_mq_hw_ctx *hctx; - int ret; unsigned long i; - if (WARN_ON_ONCE(!q->mq_freeze_depth)) - return -EINVAL; - - if (!set) - return -EINVAL; - - if (q->nr_requests == nr) - return 0; - blk_mq_quiesce_queue(q); - ret = 0; - queue_for_each_hw_ctx(q, hctx, i) { - if (!hctx->tags) - continue; + if (blk_mq_is_shared_tags(set->flags)) { /* - * If we're using an MQ scheduler, just update the scheduler - * queue depth. This is similar to what the old code would do. + * Shared tags, for sched tags, we allocate max initially hence + * tags can't grow, see blk_mq_alloc_sched_tags(). */ - if (hctx->sched_tags) { - ret = blk_mq_tag_update_depth(hctx, &hctx->sched_tags, - nr, true); - } else { - ret = blk_mq_tag_update_depth(hctx, &hctx->tags, nr, - false); + if (q->elevator) + blk_mq_tag_update_sched_shared_tags(q, nr); + else + blk_mq_tag_resize_shared_tags(set, nr); + } else if (!q->elevator) { + /* + * Non-shared hardware tags, nr is already checked from + * queue_requests_store() and tags can't grow. + */ + queue_for_each_hw_ctx(q, hctx, i) { + if (!hctx->tags) + continue; + sbitmap_queue_resize(&hctx->tags->bitmap_tags, + nr - hctx->tags->nr_reserved_tags); } - if (ret) - break; - if (q->elevator && q->elevator->type->ops.depth_updated) - q->elevator->type->ops.depth_updated(hctx); - } - if (!ret) { - q->nr_requests = nr; - if (blk_mq_is_shared_tags(set->flags)) { - if (q->elevator) - blk_mq_tag_update_sched_shared_tags(q); - else - blk_mq_tag_resize_shared_tags(set, nr); + } else if (nr <= q->elevator->et->nr_requests) { + /* Non-shared sched tags, and tags don't grow. */ + queue_for_each_hw_ctx(q, hctx, i) { + if (!hctx->sched_tags) + continue; + sbitmap_queue_resize(&hctx->sched_tags->bitmap_tags, + nr - hctx->sched_tags->nr_reserved_tags); } + } else { + /* Non-shared sched tags, and tags grow */ + queue_for_each_hw_ctx(q, hctx, i) + hctx->sched_tags = et->tags[i]; + old_et = q->elevator->et; + q->elevator->et = et; } - blk_mq_unquiesce_queue(q); + q->nr_requests = nr; + if (q->elevator && q->elevator->type->ops.depth_updated) + q->elevator->type->ops.depth_updated(q); - return ret; + blk_mq_unquiesce_queue(q); + return old_et; } /* --- linux-riscv-6.17-6.17.0.orig/block/blk-mq.h +++ linux-riscv-6.17-6.17.0/block/blk-mq.h @@ -6,6 +6,7 @@ #include "blk-stat.h" struct blk_mq_tag_set; +struct elevator_tags; struct blk_mq_ctxs { struct kobject kobj; @@ -45,7 +46,9 @@ int blk_mq_poll(struct request_queue *q, blk_qc_t cookie, struct io_comp_batch *iob, unsigned int flags); void blk_mq_exit_queue(struct request_queue *q); -int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr); +struct elevator_tags *blk_mq_update_nr_requests(struct request_queue *q, + struct elevator_tags *tags, + unsigned int nr); void blk_mq_wake_waiters(struct request_queue *q); bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *, bool); @@ -110,6 +113,17 @@ } /* + * Default to double of smaller one between hw queue_depth and + * 128, since we don't split into sync/async like the old code + * did. Additionally, this is a per-hw queue depth. + */ +static inline unsigned int blk_mq_default_nr_requests( + struct blk_mq_tag_set *set) +{ + return 2 * min_t(unsigned int, set->queue_depth, BLKDEV_DEFAULT_RQ); +} + +/* * sysfs helpers */ extern void blk_mq_sysfs_init(struct request_queue *q); @@ -171,10 +185,11 @@ unsigned int tag); void blk_mq_put_tags(struct blk_mq_tags *tags, int *tag_array, int nr_tags); int blk_mq_tag_update_depth(struct blk_mq_hw_ctx *hctx, - struct blk_mq_tags **tags, unsigned int depth, bool can_grow); + struct blk_mq_tags **tags, unsigned int depth); void blk_mq_tag_resize_shared_tags(struct blk_mq_tag_set *set, unsigned int size); -void blk_mq_tag_update_sched_shared_tags(struct request_queue *q); +void blk_mq_tag_update_sched_shared_tags(struct request_queue *q, + unsigned int nr); void blk_mq_tag_wakeup_all(struct blk_mq_tags *tags, bool); void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_tag_iter_fn *fn, --- linux-riscv-6.17-6.17.0.orig/block/blk-settings.c +++ linux-riscv-6.17-6.17.0/block/blk-settings.c @@ -56,6 +56,7 @@ lim->max_user_wzeroes_unmap_sectors = UINT_MAX; lim->max_hw_zone_append_sectors = UINT_MAX; lim->max_user_discard_sectors = UINT_MAX; + lim->atomic_write_hw_max = UINT_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); @@ -183,6 +184,16 @@ if (!bi->interval_exp) bi->interval_exp = ilog2(lim->logical_block_size); + /* + * The PI generation / validation helpers do not expect intervals to + * straddle multiple bio_vecs. Enforce alignment so that those are + * never generated, and that each buffer is aligned as expected. + */ + if (bi->csum_type) { + lim->dma_alignment = max(lim->dma_alignment, + (1U << bi->interval_exp) - 1); + } + return 0; } @@ -232,6 +243,10 @@ if (!(lim->features & BLK_FEAT_ATOMIC_WRITES)) goto unsupported; + /* UINT_MAX indicates stacked limits in initial state */ + if (lim->atomic_write_hw_max == UINT_MAX) + goto unsupported; + if (!lim->atomic_write_hw_max) goto unsupported; @@ -643,18 +658,24 @@ static bool blk_stack_atomic_writes_boundary_head(struct queue_limits *t, struct queue_limits *b) { + unsigned int boundary_sectors; + + if (!b->atomic_write_hw_boundary || !t->chunk_sectors) + return true; + + boundary_sectors = b->atomic_write_hw_boundary >> SECTOR_SHIFT; + /* * Ensure atomic write boundary is aligned with chunk sectors. Stacked - * devices store chunk sectors in t->io_min. + * devices store any stripe size in t->chunk_sectors. */ - if (b->atomic_write_hw_boundary > t->io_min && - b->atomic_write_hw_boundary % t->io_min) + if (boundary_sectors > t->chunk_sectors && + boundary_sectors % t->chunk_sectors) return false; - if (t->io_min > b->atomic_write_hw_boundary && - t->io_min % b->atomic_write_hw_boundary) + if (t->chunk_sectors > boundary_sectors && + t->chunk_sectors % boundary_sectors) return false; - t->atomic_write_hw_boundary = b->atomic_write_hw_boundary; return true; } @@ -695,13 +716,13 @@ static bool blk_stack_atomic_writes_head(struct queue_limits *t, struct queue_limits *b) { - if (b->atomic_write_hw_boundary && - !blk_stack_atomic_writes_boundary_head(t, b)) + if (!blk_stack_atomic_writes_boundary_head(t, b)) return false; t->atomic_write_hw_unit_max = b->atomic_write_hw_unit_max; t->atomic_write_hw_unit_min = b->atomic_write_hw_unit_min; t->atomic_write_hw_max = b->atomic_write_hw_max; + t->atomic_write_hw_boundary = b->atomic_write_hw_boundary; return true; } @@ -717,18 +738,14 @@ if (!blk_atomic_write_start_sect_aligned(start, b)) goto unsupported; - /* - * If atomic_write_hw_max is set, we have already stacked 1x bottom - * device, so check for compliance. - */ - if (t->atomic_write_hw_max) { + /* UINT_MAX indicates no stacking of bottom devices yet */ + if (t->atomic_write_hw_max == UINT_MAX) { + if (!blk_stack_atomic_writes_head(t, b)) + goto unsupported; + } else { if (!blk_stack_atomic_writes_tail(t, b)) goto unsupported; - return; } - - if (!blk_stack_atomic_writes_head(t, b)) - goto unsupported; blk_stack_atomic_writes_chunk_sectors(t); return; @@ -763,7 +780,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t start) { - unsigned int top, bottom, alignment, ret = 0; + unsigned int top, bottom, alignment; + int ret = 0; t->features |= (b->features & BLK_FEAT_INHERIT_MASK); --- linux-riscv-6.17-6.17.0.orig/block/blk-sysfs.c +++ linux-riscv-6.17-6.17.0/block/blk-sysfs.c @@ -64,10 +64,12 @@ static ssize_t queue_requests_store(struct gendisk *disk, const char *page, size_t count) { - unsigned long nr; - int ret, err; - unsigned int memflags; struct request_queue *q = disk->queue; + struct blk_mq_tag_set *set = q->tag_set; + struct elevator_tags *et = NULL; + unsigned int memflags; + unsigned long nr; + int ret; if (!queue_is_mq(q)) return -EINVAL; @@ -76,16 +78,55 @@ if (ret < 0) return ret; - memflags = blk_mq_freeze_queue(q); - mutex_lock(&q->elevator_lock); + /* + * Serialize updating nr_requests with concurrent queue_requests_store() + * and switching elevator. + */ + down_write(&set->update_nr_hwq_lock); + + if (nr == q->nr_requests) + goto unlock; + if (nr < BLKDEV_MIN_RQ) nr = BLKDEV_MIN_RQ; - err = blk_mq_update_nr_requests(disk->queue, nr); - if (err) - ret = err; + /* + * Switching elevator is protected by update_nr_hwq_lock: + * - read lock is held from elevator sysfs attribute; + * - write lock is held from updating nr_hw_queues; + * Hence it's safe to access q->elevator here with write lock held. + */ + if (nr <= set->reserved_tags || + (q->elevator && nr > MAX_SCHED_RQ) || + (!q->elevator && nr > set->queue_depth)) { + ret = -EINVAL; + goto unlock; + } + + if (!blk_mq_is_shared_tags(set->flags) && q->elevator && + nr > q->elevator->et->nr_requests) { + /* + * Tags will grow, allocate memory before freezing queue to + * prevent deadlock. + */ + et = blk_mq_alloc_sched_tags(set, q->nr_hw_queues, nr); + if (!et) { + ret = -ENOMEM; + goto unlock; + } + } + + memflags = blk_mq_freeze_queue(q); + mutex_lock(&q->elevator_lock); + et = blk_mq_update_nr_requests(q, et, nr); mutex_unlock(&q->elevator_lock); blk_mq_unfreeze_queue(q, memflags); + + if (et) + blk_mq_free_sched_tags(et, set); + +unlock: + up_write(&set->update_nr_hwq_lock); return ret; } --- linux-riscv-6.17-6.17.0.orig/block/blk-throttle.c +++ linux-riscv-6.17-6.17.0/block/blk-throttle.c @@ -22,9 +22,7 @@ #define THROTL_QUANTUM 32 /* Throttling is performed over a slice and after that slice is renewed */ -#define DFL_THROTL_SLICE_HD (HZ / 10) -#define DFL_THROTL_SLICE_SSD (HZ / 50) -#define MAX_THROTL_SLICE (HZ) +#define DFL_THROTL_SLICE (HZ / 10) /* A workqueue to queue throttle related work */ static struct workqueue_struct *kthrotld_workqueue; @@ -1224,7 +1222,7 @@ if (!bio_list_empty(&bio_list_on_stack)) { blk_start_plug(&plug); while ((bio = bio_list_pop(&bio_list_on_stack))) - submit_bio_noacct_nocheck(bio); + submit_bio_noacct_nocheck(bio, false); blk_finish_plug(&plug); } } @@ -1327,17 +1325,13 @@ INIT_WORK(&td->dispatch_work, blk_throtl_dispatch_work_fn); throtl_service_queue_init(&td->service_queue); - /* - * Freeze queue before activating policy, to synchronize with IO path, - * which is protected by 'q_usage_counter'. - */ memflags = blk_mq_freeze_queue(disk->queue); blk_mq_quiesce_queue(disk->queue); q->td = td; td->queue = q; - /* activate policy */ + /* activate policy, blk_throtl_activated() will return true */ ret = blkcg_activate_policy(disk, &blkcg_policy_throtl); if (ret) { q->td = NULL; @@ -1345,10 +1339,7 @@ goto out; } - if (blk_queue_nonrot(q)) - td->throtl_slice = DFL_THROTL_SLICE_SSD; - else - td->throtl_slice = DFL_THROTL_SLICE_HD; + td->throtl_slice = DFL_THROTL_SLICE; td->track_bio_latency = !queue_is_mq(q); if (!td->track_bio_latency) blk_stat_enable_accounting(q); @@ -1846,12 +1837,15 @@ { struct request_queue *q = disk->queue; - if (!blk_throtl_activated(q)) + /* + * blkg_destroy_all() already deactivate throtl policy, just check and + * free throtl data. + */ + if (!q->td) return; timer_delete_sync(&q->td->service_queue.pending_timer); throtl_shutdown_wq(q); - blkcg_deactivate_policy(disk, &blkcg_policy_throtl); kfree(q->td); } --- linux-riscv-6.17-6.17.0.orig/block/blk-throttle.h +++ linux-riscv-6.17-6.17.0/block/blk-throttle.h @@ -156,7 +156,13 @@ static inline bool blk_throtl_activated(struct request_queue *q) { - return q->td != NULL; + /* + * q->td guarantees that the blk-throttle module is already loaded, + * and the plid of blk-throttle is assigned. + * blkcg_policy_enabled() guarantees that the policy is activated + * in the request_queue. + */ + return q->td != NULL && blkcg_policy_enabled(q, &blkcg_policy_throtl); } static inline bool blk_should_throtl(struct bio *bio) @@ -164,11 +170,6 @@ struct throtl_grp *tg; int rw = bio_data_dir(bio); - /* - * This is called under bio_queue_enter(), and it's synchronized with - * the activation of blk-throtl, which is protected by - * blk_mq_freeze_queue(). - */ if (!blk_throtl_activated(bio->bi_bdev->bd_queue)) return false; @@ -194,7 +195,10 @@ static inline bool blk_throtl_bio(struct bio *bio) { - + /* + * block throttling takes effect if the policy is activated + * in the bio's request_queue. + */ if (!blk_should_throtl(bio)) return false; --- linux-riscv-6.17-6.17.0.orig/block/blk.h +++ linux-riscv-6.17-6.17.0/block/blk.h @@ -54,7 +54,7 @@ bool __blk_freeze_queue_start(struct request_queue *q, struct task_struct *owner); int __bio_queue_enter(struct request_queue *q, struct bio *bio); -void submit_bio_noacct_nocheck(struct bio *bio); +void submit_bio_noacct_nocheck(struct bio *bio, bool split); void bio_await_chain(struct bio *bio); static inline bool blk_try_enter_queue(struct request_queue *q, bool pm) @@ -615,6 +615,7 @@ int disk_register_independent_access_ranges(struct gendisk *disk); void disk_unregister_independent_access_ranges(struct gendisk *disk); +int should_fail_bio(struct bio *bio); #ifdef CONFIG_FAIL_MAKE_REQUEST bool should_fail_request(struct block_device *part, unsigned int bytes); #else /* CONFIG_FAIL_MAKE_REQUEST */ @@ -680,48 +681,6 @@ return ns_to_ktime(blk_time_get_ns()); } -/* - * From most significant bit: - * 1 bit: reserved for other usage, see below - * 12 bits: original size of bio - * 51 bits: issue time of bio - */ -#define BIO_ISSUE_RES_BITS 1 -#define BIO_ISSUE_SIZE_BITS 12 -#define BIO_ISSUE_RES_SHIFT (64 - BIO_ISSUE_RES_BITS) -#define BIO_ISSUE_SIZE_SHIFT (BIO_ISSUE_RES_SHIFT - BIO_ISSUE_SIZE_BITS) -#define BIO_ISSUE_TIME_MASK ((1ULL << BIO_ISSUE_SIZE_SHIFT) - 1) -#define BIO_ISSUE_SIZE_MASK \ - (((1ULL << BIO_ISSUE_SIZE_BITS) - 1) << BIO_ISSUE_SIZE_SHIFT) -#define BIO_ISSUE_RES_MASK (~((1ULL << BIO_ISSUE_RES_SHIFT) - 1)) - -/* Reserved bit for blk-throtl */ -#define BIO_ISSUE_THROTL_SKIP_LATENCY (1ULL << 63) - -static inline u64 __bio_issue_time(u64 time) -{ - return time & BIO_ISSUE_TIME_MASK; -} - -static inline u64 bio_issue_time(struct bio_issue *issue) -{ - return __bio_issue_time(issue->value); -} - -static inline sector_t bio_issue_size(struct bio_issue *issue) -{ - return ((issue->value & BIO_ISSUE_SIZE_MASK) >> BIO_ISSUE_SIZE_SHIFT); -} - -static inline void bio_issue_init(struct bio_issue *issue, - sector_t size) -{ - size &= (1ULL << BIO_ISSUE_SIZE_BITS) - 1; - issue->value = ((issue->value & BIO_ISSUE_RES_MASK) | - (blk_time_get_ns() & BIO_ISSUE_TIME_MASK) | - ((u64)size << BIO_ISSUE_SIZE_SHIFT)); -} - void bdev_release(struct file *bdev_file); int bdev_open(struct block_device *bdev, blk_mode_t mode, void *holder, const struct blk_holder_ops *hops, struct file *bdev_file); --- linux-riscv-6.17-6.17.0.orig/block/elevator.c +++ linux-riscv-6.17-6.17.0/block/elevator.c @@ -669,7 +669,8 @@ lockdep_assert_held(&set->update_nr_hwq_lock); if (strncmp(ctx->name, "none", 4)) { - ctx->et = blk_mq_alloc_sched_tags(set, set->nr_hw_queues); + ctx->et = blk_mq_alloc_sched_tags(set, set->nr_hw_queues, + blk_mq_default_nr_requests(set)); if (!ctx->et) return -ENOMEM; } --- linux-riscv-6.17-6.17.0.orig/block/elevator.h +++ linux-riscv-6.17-6.17.0/block/elevator.h @@ -37,7 +37,7 @@ void (*exit_sched)(struct elevator_queue *); int (*init_hctx)(struct blk_mq_hw_ctx *, unsigned int); void (*exit_hctx)(struct blk_mq_hw_ctx *, unsigned int); - void (*depth_updated)(struct blk_mq_hw_ctx *); + void (*depth_updated)(struct request_queue *); bool (*allow_merge)(struct request_queue *, struct request *, struct bio *); bool (*bio_merge)(struct request_queue *, struct bio *, unsigned int); --- linux-riscv-6.17-6.17.0.orig/block/kyber-iosched.c +++ linux-riscv-6.17-6.17.0/block/kyber-iosched.c @@ -399,6 +399,14 @@ return ERR_PTR(ret); } +static void kyber_depth_updated(struct request_queue *q) +{ + struct kyber_queue_data *kqd = q->elevator->elevator_data; + + kqd->async_depth = q->nr_requests * KYBER_ASYNC_PERCENT / 100U; + blk_mq_set_min_shallow_depth(q, kqd->async_depth); +} + static int kyber_init_sched(struct request_queue *q, struct elevator_queue *eq) { struct kyber_queue_data *kqd; @@ -413,6 +421,7 @@ eq->elevator_data = kqd; q->elevator = eq; + kyber_depth_updated(q); return 0; } @@ -440,15 +449,6 @@ INIT_LIST_HEAD(&kcq->rq_list[i]); } -static void kyber_depth_updated(struct blk_mq_hw_ctx *hctx) -{ - struct kyber_queue_data *kqd = hctx->queue->elevator->elevator_data; - struct blk_mq_tags *tags = hctx->sched_tags; - - kqd->async_depth = hctx->queue->nr_requests * KYBER_ASYNC_PERCENT / 100U; - sbitmap_queue_min_shallow_depth(&tags->bitmap_tags, kqd->async_depth); -} - static int kyber_init_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx) { struct kyber_hctx_data *khd; @@ -493,7 +493,6 @@ khd->batching = 0; hctx->sched_data = khd; - kyber_depth_updated(hctx); return 0; --- linux-riscv-6.17-6.17.0.orig/block/mq-deadline.c +++ linux-riscv-6.17-6.17.0/block/mq-deadline.c @@ -71,7 +71,6 @@ * present on both sort_list[] and fifo_list[]. */ struct dd_per_prio { - struct list_head dispatch; struct rb_root sort_list[DD_DIR_COUNT]; struct list_head fifo_list[DD_DIR_COUNT]; /* Position of the most recently dispatched request. */ @@ -84,6 +83,7 @@ * run time data */ + struct list_head dispatch; struct dd_per_prio per_prio[DD_PRIO_COUNT]; /* Data direction of latest dispatched request. */ @@ -310,6 +310,19 @@ return time_after(start_time, latest_start); } +static struct request *dd_start_request(struct deadline_data *dd, + enum dd_data_dir data_dir, + struct request *rq) +{ + u8 ioprio_class = dd_rq_ioclass(rq); + enum dd_prio prio = ioprio_class_to_prio[ioprio_class]; + + dd->per_prio[prio].latest_pos[data_dir] = blk_rq_pos(rq); + dd->per_prio[prio].stats.dispatched++; + rq->rq_flags |= RQF_STARTED; + return rq; +} + /* * deadline_dispatch_requests selects the best request according to * read/write expire, fifo_batch, etc and with a start time <= @latest_start. @@ -320,21 +333,9 @@ { struct request *rq, *next_rq; enum dd_data_dir data_dir; - enum dd_prio prio; - u8 ioprio_class; lockdep_assert_held(&dd->lock); - if (!list_empty(&per_prio->dispatch)) { - rq = list_first_entry(&per_prio->dispatch, struct request, - queuelist); - if (started_after(dd, rq, latest_start)) - return NULL; - list_del_init(&rq->queuelist); - data_dir = rq_data_dir(rq); - goto done; - } - /* * batches are currently reads XOR writes */ @@ -414,13 +415,7 @@ */ dd->batching++; deadline_move_request(dd, per_prio, rq); -done: - ioprio_class = dd_rq_ioclass(rq); - prio = ioprio_class_to_prio[ioprio_class]; - dd->per_prio[prio].latest_pos[data_dir] = blk_rq_pos(rq); - dd->per_prio[prio].stats.dispatched++; - rq->rq_flags |= RQF_STARTED; - return rq; + return dd_start_request(dd, data_dir, rq); } /* @@ -467,6 +462,14 @@ enum dd_prio prio; spin_lock(&dd->lock); + + if (!list_empty(&dd->dispatch)) { + rq = list_first_entry(&dd->dispatch, struct request, queuelist); + list_del_init(&rq->queuelist); + dd_start_request(dd, rq_data_dir(rq), rq); + goto unlock; + } + rq = dd_dispatch_prio_aged_requests(dd, now); if (rq) goto unlock; @@ -507,22 +510,12 @@ } /* Called by blk_mq_update_nr_requests(). */ -static void dd_depth_updated(struct blk_mq_hw_ctx *hctx) +static void dd_depth_updated(struct request_queue *q) { - struct request_queue *q = hctx->queue; struct deadline_data *dd = q->elevator->elevator_data; - struct blk_mq_tags *tags = hctx->sched_tags; dd->async_depth = q->nr_requests; - - sbitmap_queue_min_shallow_depth(&tags->bitmap_tags, 1); -} - -/* Called by blk_mq_init_hctx() and blk_mq_init_sched(). */ -static int dd_init_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx) -{ - dd_depth_updated(hctx); - return 0; + blk_mq_set_min_shallow_depth(q, 1); } static void dd_exit_sched(struct elevator_queue *e) @@ -565,10 +558,10 @@ eq->elevator_data = dd; + INIT_LIST_HEAD(&dd->dispatch); for (prio = 0; prio <= DD_PRIO_MAX; prio++) { struct dd_per_prio *per_prio = &dd->per_prio[prio]; - INIT_LIST_HEAD(&per_prio->dispatch); INIT_LIST_HEAD(&per_prio->fifo_list[DD_READ]); INIT_LIST_HEAD(&per_prio->fifo_list[DD_WRITE]); per_prio->sort_list[DD_READ] = RB_ROOT; @@ -587,6 +580,7 @@ blk_queue_flag_set(QUEUE_FLAG_SQ_SCHED, q); q->elevator = eq; + dd_depth_updated(q); return 0; } @@ -671,7 +665,7 @@ trace_block_rq_insert(rq); if (flags & BLK_MQ_INSERT_AT_HEAD) { - list_add(&rq->queuelist, &per_prio->dispatch); + list_add(&rq->queuelist, &dd->dispatch); rq->fifo_time = jiffies; } else { deadline_add_rq_rb(per_prio, rq); @@ -738,8 +732,7 @@ static bool dd_has_work_for_prio(struct dd_per_prio *per_prio) { - return !list_empty_careful(&per_prio->dispatch) || - !list_empty_careful(&per_prio->fifo_list[DD_READ]) || + return !list_empty_careful(&per_prio->fifo_list[DD_READ]) || !list_empty_careful(&per_prio->fifo_list[DD_WRITE]); } @@ -748,6 +741,9 @@ struct deadline_data *dd = hctx->queue->elevator->elevator_data; enum dd_prio prio; + if (!list_empty_careful(&dd->dispatch)) + return true; + for (prio = 0; prio <= DD_PRIO_MAX; prio++) if (dd_has_work_for_prio(&dd->per_prio[prio])) return true; @@ -956,49 +952,39 @@ return 0; } -#define DEADLINE_DISPATCH_ATTR(prio) \ -static void *deadline_dispatch##prio##_start(struct seq_file *m, \ - loff_t *pos) \ - __acquires(&dd->lock) \ -{ \ - struct request_queue *q = m->private; \ - struct deadline_data *dd = q->elevator->elevator_data; \ - struct dd_per_prio *per_prio = &dd->per_prio[prio]; \ - \ - spin_lock(&dd->lock); \ - return seq_list_start(&per_prio->dispatch, *pos); \ -} \ - \ -static void *deadline_dispatch##prio##_next(struct seq_file *m, \ - void *v, loff_t *pos) \ -{ \ - struct request_queue *q = m->private; \ - struct deadline_data *dd = q->elevator->elevator_data; \ - struct dd_per_prio *per_prio = &dd->per_prio[prio]; \ - \ - return seq_list_next(v, &per_prio->dispatch, pos); \ -} \ - \ -static void deadline_dispatch##prio##_stop(struct seq_file *m, void *v) \ - __releases(&dd->lock) \ -{ \ - struct request_queue *q = m->private; \ - struct deadline_data *dd = q->elevator->elevator_data; \ - \ - spin_unlock(&dd->lock); \ -} \ - \ -static const struct seq_operations deadline_dispatch##prio##_seq_ops = { \ - .start = deadline_dispatch##prio##_start, \ - .next = deadline_dispatch##prio##_next, \ - .stop = deadline_dispatch##prio##_stop, \ - .show = blk_mq_debugfs_rq_show, \ +static void *deadline_dispatch_start(struct seq_file *m, loff_t *pos) + __acquires(&dd->lock) +{ + struct request_queue *q = m->private; + struct deadline_data *dd = q->elevator->elevator_data; + + spin_lock(&dd->lock); + return seq_list_start(&dd->dispatch, *pos); +} + +static void *deadline_dispatch_next(struct seq_file *m, void *v, loff_t *pos) +{ + struct request_queue *q = m->private; + struct deadline_data *dd = q->elevator->elevator_data; + + return seq_list_next(v, &dd->dispatch, pos); } -DEADLINE_DISPATCH_ATTR(0); -DEADLINE_DISPATCH_ATTR(1); -DEADLINE_DISPATCH_ATTR(2); -#undef DEADLINE_DISPATCH_ATTR +static void deadline_dispatch_stop(struct seq_file *m, void *v) + __releases(&dd->lock) +{ + struct request_queue *q = m->private; + struct deadline_data *dd = q->elevator->elevator_data; + + spin_unlock(&dd->lock); +} + +static const struct seq_operations deadline_dispatch_seq_ops = { + .start = deadline_dispatch_start, + .next = deadline_dispatch_next, + .stop = deadline_dispatch_stop, + .show = blk_mq_debugfs_rq_show, +}; #define DEADLINE_QUEUE_DDIR_ATTRS(name) \ {#name "_fifo_list", 0400, \ @@ -1021,9 +1007,7 @@ {"batching", 0400, deadline_batching_show}, {"starved", 0400, deadline_starved_show}, {"async_depth", 0400, dd_async_depth_show}, - {"dispatch0", 0400, .seq_ops = &deadline_dispatch0_seq_ops}, - {"dispatch1", 0400, .seq_ops = &deadline_dispatch1_seq_ops}, - {"dispatch2", 0400, .seq_ops = &deadline_dispatch2_seq_ops}, + {"dispatch", 0400, .seq_ops = &deadline_dispatch_seq_ops}, {"owned_by_driver", 0400, dd_owned_by_driver_show}, {"queued", 0400, dd_queued_show}, {}, @@ -1048,7 +1032,6 @@ .has_work = dd_has_work, .init_sched = dd_init_sched, .exit_sched = dd_exit_sched, - .init_hctx = dd_init_hctx, }, #ifdef CONFIG_BLK_DEBUG_FS --- linux-riscv-6.17-6.17.0.orig/certs/blacklist.c +++ linux-riscv-6.17-6.17.0/certs/blacklist.c @@ -276,6 +276,9 @@ if (IS_ERR(key)) { pr_err("Problem with revocation key (%ld)\n", PTR_ERR(key)); return PTR_ERR(key); + } else { + pr_notice("Revoked X.509 cert '%s'\n", + key_ref_to_ptr(key)->description); } return 0; --- linux-riscv-6.17-6.17.0.orig/crypto/842.c +++ linux-riscv-6.17-6.17.0/crypto/842.c @@ -54,8 +54,10 @@ } static struct scomp_alg scomp = { - .alloc_ctx = crypto842_alloc_ctx, - .free_ctx = crypto842_free_ctx, + .streams = { + .alloc_ctx = crypto842_alloc_ctx, + .free_ctx = crypto842_free_ctx, + }, .compress = crypto842_scompress, .decompress = crypto842_sdecompress, .base = { --- linux-riscv-6.17-6.17.0.orig/crypto/aead.c +++ linux-riscv-6.17-6.17.0/crypto/aead.c @@ -120,6 +120,7 @@ struct aead_alg *alg = crypto_aead_alg(aead); crypto_aead_set_flags(aead, CRYPTO_TFM_NEED_KEY); + crypto_aead_set_reqsize(aead, crypto_tfm_alg_reqsize(tfm)); aead->authsize = alg->maxauthsize; --- linux-riscv-6.17-6.17.0.orig/crypto/aegis128-neon-inner.c +++ linux-riscv-6.17-6.17.0/crypto/aegis128-neon-inner.c @@ -148,8 +148,8 @@ kiv, vld1q_u8(const1), vld1q_u8(const0), - k ^ vld1q_u8(const0), - k ^ vld1q_u8(const1), + (uint8x16_t) (k ^ vld1q_u8(const0)), + (uint8x16_t) (k ^ vld1q_u8(const1)), }}; int i; --- linux-riscv-6.17-6.17.0.orig/crypto/ahash.c +++ linux-riscv-6.17-6.17.0/crypto/ahash.c @@ -423,7 +423,11 @@ req->nbytes += nonzero - blen; - blen = err < 0 ? 0 : err + nonzero; + blen = 0; + if (err >= 0) { + blen = err + nonzero; + err = 0; + } if (ahash_request_isvirt(req)) memcpy(buf, req->svirt + req->nbytes - blen, blen); else @@ -661,6 +665,12 @@ in); if (crypto_ahash_get_flags(tfm) & CRYPTO_TFM_NEED_KEY) return -ENOKEY; + if (crypto_ahash_block_only(tfm)) { + unsigned int reqsize = crypto_ahash_reqsize(tfm); + u8 *buf = ahash_request_ctx(req); + + buf[reqsize - 1] = 0; + } return crypto_ahash_alg(tfm)->import_core(req, in); } EXPORT_SYMBOL_GPL(crypto_ahash_import_core); @@ -674,10 +684,14 @@ if (crypto_ahash_get_flags(tfm) & CRYPTO_TFM_NEED_KEY) return -ENOKEY; if (crypto_ahash_block_only(tfm)) { + unsigned int plen = crypto_ahash_blocksize(tfm) + 1; unsigned int reqsize = crypto_ahash_reqsize(tfm); + unsigned int ss = crypto_ahash_statesize(tfm); u8 *buf = ahash_request_ctx(req); - buf[reqsize - 1] = 0; + memcpy(buf + reqsize - plen, in + ss - plen, plen); + if (buf[reqsize - 1] >= plen) + return -EOVERFLOW; } return crypto_ahash_alg(tfm)->import(req, in); } --- linux-riscv-6.17-6.17.0.orig/crypto/asymmetric_keys/asymmetric_type.c +++ linux-riscv-6.17-6.17.0/crypto/asymmetric_keys/asymmetric_type.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -141,12 +142,17 @@ size_t len_2) { struct asymmetric_key_id *kid; + size_t kid_sz; + size_t len; - kid = kmalloc(sizeof(struct asymmetric_key_id) + len_1 + len_2, - GFP_KERNEL); + if (check_add_overflow(len_1, len_2, &len)) + return ERR_PTR(-EOVERFLOW); + if (check_add_overflow(sizeof(struct asymmetric_key_id), len, &kid_sz)) + return ERR_PTR(-EOVERFLOW); + kid = kmalloc(kid_sz, GFP_KERNEL); if (!kid) return ERR_PTR(-ENOMEM); - kid->len = len_1 + len_2; + kid->len = len; memcpy(kid->data, val_1, len_1); memcpy(kid->data + len_1, val_2, len_2); return kid; --- linux-riscv-6.17-6.17.0.orig/crypto/asymmetric_keys/x509_cert_parser.c +++ linux-riscv-6.17-6.17.0/crypto/asymmetric_keys/x509_cert_parser.c @@ -610,11 +610,14 @@ /* * Get hold of the basicConstraints * v[1] is the encoding size - * (Expect 0x2 or greater, making it 1 or more bytes) + * (Expect 0x00 for empty SEQUENCE with CA:FALSE, or + * 0x03 or greater for non-empty SEQUENCE) * v[2] is the encoding type * (Expect an ASN1_BOOL for the CA) - * v[3] is the contents of the ASN1_BOOL - * (Expect 1 if the CA is TRUE) + * v[3] is the length of the ASN1_BOOL + * (Expect 1 for a single byte boolean) + * v[4] is the contents of the ASN1_BOOL + * (Expect 0xFF if the CA is TRUE) * vlen should match the entire extension size */ if (v[0] != (ASN1_CONS_BIT | ASN1_SEQ)) @@ -623,8 +626,13 @@ return -EBADMSG; if (v[1] != vlen - 2) return -EBADMSG; - if (vlen >= 4 && v[1] != 0 && v[2] == ASN1_BOOL && v[3] == 1) + /* Empty SEQUENCE means CA:FALSE (default value omitted per DER) */ + if (v[1] == 0) + return 0; + if (vlen >= 5 && v[2] == ASN1_BOOL && v[3] == 1 && v[4] == 0xFF) ctx->cert->pub->key_eflags |= 1 << KEY_EFLAG_CA; + else + return -EBADMSG; return 0; } --- linux-riscv-6.17-6.17.0.orig/crypto/asymmetric_keys/x509_loader.c +++ linux-riscv-6.17-6.17.0/crypto/asymmetric_keys/x509_loader.c @@ -41,6 +41,7 @@ if (IS_ERR(key)) { pr_err("Problem loading in-kernel X.509 certificate (%ld)\n", PTR_ERR(key)); + WARN_ON_ONCE(1); } else { pr_notice("Loaded X.509 cert '%s'\n", key_ref_to_ptr(key)->description); --- linux-riscv-6.17-6.17.0.orig/crypto/authenc.c +++ linux-riscv-6.17-6.17.0/crypto/authenc.c @@ -37,7 +37,7 @@ static void authenc_request_complete(struct aead_request *req, int err) { - if (err != -EINPROGRESS) + if (err != -EINPROGRESS && err != -EBUSY) aead_request_complete(req, err); } @@ -107,27 +107,42 @@ return err; } -static void authenc_geniv_ahash_done(void *data, int err) +static void authenc_geniv_ahash_finish(struct aead_request *req) { - struct aead_request *req = data; struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct aead_instance *inst = aead_alg_instance(authenc); struct authenc_instance_ctx *ictx = aead_instance_ctx(inst); struct authenc_request_ctx *areq_ctx = aead_request_ctx(req); struct ahash_request *ahreq = (void *)(areq_ctx->tail + ictx->reqoff); - if (err) - goto out; - scatterwalk_map_and_copy(ahreq->result, req->dst, req->assoclen + req->cryptlen, crypto_aead_authsize(authenc), 1); +} -out: +static void authenc_geniv_ahash_done(void *data, int err) +{ + struct aead_request *req = data; + + if (!err) + authenc_geniv_ahash_finish(req); aead_request_complete(req, err); } -static int crypto_authenc_genicv(struct aead_request *req, unsigned int flags) +/* + * Used when the ahash request was invoked in the async callback context + * of the previous skcipher request. Eat any EINPROGRESS notifications. + */ +static void authenc_geniv_ahash_done2(void *data, int err) +{ + struct aead_request *req = data; + + if (!err) + authenc_geniv_ahash_finish(req); + authenc_request_complete(req, err); +} + +static int crypto_authenc_genicv(struct aead_request *req, unsigned int mask) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct aead_instance *inst = aead_alg_instance(authenc); @@ -136,6 +151,7 @@ struct crypto_ahash *auth = ctx->auth; struct authenc_request_ctx *areq_ctx = aead_request_ctx(req); struct ahash_request *ahreq = (void *)(areq_ctx->tail + ictx->reqoff); + unsigned int flags = aead_request_flags(req) & ~mask; u8 *hash = areq_ctx->tail; int err; @@ -143,7 +159,8 @@ ahash_request_set_crypt(ahreq, req->dst, hash, req->assoclen + req->cryptlen); ahash_request_set_callback(ahreq, flags, - authenc_geniv_ahash_done, req); + mask ? authenc_geniv_ahash_done2 : + authenc_geniv_ahash_done, req); err = crypto_ahash_digest(ahreq); if (err) @@ -159,12 +176,11 @@ { struct aead_request *areq = data; - if (err) - goto out; - - err = crypto_authenc_genicv(areq, 0); - -out: + if (err) { + aead_request_complete(areq, err); + return; + } + err = crypto_authenc_genicv(areq, CRYPTO_TFM_REQ_MAY_SLEEP); authenc_request_complete(areq, err); } @@ -199,11 +215,18 @@ if (err) return err; - return crypto_authenc_genicv(req, aead_request_flags(req)); + return crypto_authenc_genicv(req, 0); +} + +static void authenc_decrypt_tail_done(void *data, int err) +{ + struct aead_request *req = data; + + authenc_request_complete(req, err); } static int crypto_authenc_decrypt_tail(struct aead_request *req, - unsigned int flags) + unsigned int mask) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct aead_instance *inst = aead_alg_instance(authenc); @@ -214,6 +237,7 @@ struct skcipher_request *skreq = (void *)(areq_ctx->tail + ictx->reqoff); unsigned int authsize = crypto_aead_authsize(authenc); + unsigned int flags = aead_request_flags(req) & ~mask; u8 *ihash = ahreq->result + authsize; struct scatterlist *src, *dst; @@ -230,7 +254,9 @@ skcipher_request_set_tfm(skreq, ctx->enc); skcipher_request_set_callback(skreq, flags, - req->base.complete, req->base.data); + mask ? authenc_decrypt_tail_done : + req->base.complete, + mask ? req : req->base.data); skcipher_request_set_crypt(skreq, src, dst, req->cryptlen - authsize, req->iv); @@ -241,12 +267,11 @@ { struct aead_request *req = data; - if (err) - goto out; - - err = crypto_authenc_decrypt_tail(req, 0); - -out: + if (err) { + aead_request_complete(req, err); + return; + } + err = crypto_authenc_decrypt_tail(req, CRYPTO_TFM_REQ_MAY_SLEEP); authenc_request_complete(req, err); } @@ -273,7 +298,7 @@ if (err) return err; - return crypto_authenc_decrypt_tail(req, aead_request_flags(req)); + return crypto_authenc_decrypt_tail(req, 0); } static int crypto_authenc_init_tfm(struct crypto_aead *tfm) --- linux-riscv-6.17-6.17.0.orig/crypto/essiv.c +++ linux-riscv-6.17-6.17.0/crypto/essiv.c @@ -186,9 +186,14 @@ const struct essiv_tfm_ctx *tctx = crypto_aead_ctx(tfm); struct essiv_aead_request_ctx *rctx = aead_request_ctx(req); struct aead_request *subreq = &rctx->aead_req; + int ivsize = crypto_aead_ivsize(tfm); + int ssize = req->assoclen - ivsize; struct scatterlist *src = req->src; int err; + if (ssize < 0) + return -EINVAL; + crypto_cipher_encrypt_one(tctx->essiv_cipher, req->iv, req->iv); /* @@ -198,19 +203,12 @@ */ rctx->assoc = NULL; if (req->src == req->dst || !enc) { - scatterwalk_map_and_copy(req->iv, req->dst, - req->assoclen - crypto_aead_ivsize(tfm), - crypto_aead_ivsize(tfm), 1); + scatterwalk_map_and_copy(req->iv, req->dst, ssize, ivsize, 1); } else { u8 *iv = (u8 *)aead_request_ctx(req) + tctx->ivoffset; - int ivsize = crypto_aead_ivsize(tfm); - int ssize = req->assoclen - ivsize; struct scatterlist *sg; int nents; - if (ssize < 0) - return -EINVAL; - nents = sg_nents_for_len(req->src, ssize); if (nents < 0) return -EINVAL; --- linux-riscv-6.17-6.17.0.orig/crypto/fips.c +++ linux-riscv-6.17-6.17.0/crypto/fips.c @@ -15,7 +15,8 @@ #include #include -int fips_enabled; +/* LP: #2049082 UBUNTU: SAUCE: FIPS kernels default to FIPS mode */ +int fips_enabled = 1; EXPORT_SYMBOL_GPL(fips_enabled); ATOMIC_NOTIFIER_HEAD(fips_fail_notif_chain); --- linux-riscv-6.17-6.17.0.orig/crypto/lz4.c +++ linux-riscv-6.17-6.17.0/crypto/lz4.c @@ -68,8 +68,10 @@ } static struct scomp_alg scomp = { - .alloc_ctx = lz4_alloc_ctx, - .free_ctx = lz4_free_ctx, + .streams = { + .alloc_ctx = lz4_alloc_ctx, + .free_ctx = lz4_free_ctx, + }, .compress = lz4_scompress, .decompress = lz4_sdecompress, .base = { --- linux-riscv-6.17-6.17.0.orig/crypto/lz4hc.c +++ linux-riscv-6.17-6.17.0/crypto/lz4hc.c @@ -66,8 +66,10 @@ } static struct scomp_alg scomp = { - .alloc_ctx = lz4hc_alloc_ctx, - .free_ctx = lz4hc_free_ctx, + .streams = { + .alloc_ctx = lz4hc_alloc_ctx, + .free_ctx = lz4hc_free_ctx, + }, .compress = lz4hc_scompress, .decompress = lz4hc_sdecompress, .base = { --- linux-riscv-6.17-6.17.0.orig/crypto/lzo-rle.c +++ linux-riscv-6.17-6.17.0/crypto/lzo-rle.c @@ -70,8 +70,10 @@ } static struct scomp_alg scomp = { - .alloc_ctx = lzorle_alloc_ctx, - .free_ctx = lzorle_free_ctx, + .streams = { + .alloc_ctx = lzorle_alloc_ctx, + .free_ctx = lzorle_free_ctx, + }, .compress = lzorle_scompress, .decompress = lzorle_sdecompress, .base = { --- linux-riscv-6.17-6.17.0.orig/crypto/lzo.c +++ linux-riscv-6.17-6.17.0/crypto/lzo.c @@ -70,8 +70,10 @@ } static struct scomp_alg scomp = { - .alloc_ctx = lzo_alloc_ctx, - .free_ctx = lzo_free_ctx, + .streams = { + .alloc_ctx = lzo_alloc_ctx, + .free_ctx = lzo_free_ctx, + }, .compress = lzo_scompress, .decompress = lzo_sdecompress, .base = { --- linux-riscv-6.17-6.17.0.orig/crypto/rng.c +++ linux-riscv-6.17-6.17.0/crypto/rng.c @@ -168,6 +168,11 @@ EXPORT_SYMBOL_GPL(crypto_del_default_rng); #endif +static void rng_default_set_ent(struct crypto_rng *tfm, const u8 *data, + unsigned int len) +{ +} + int crypto_register_rng(struct rng_alg *alg) { struct crypto_alg *base = &alg->base; @@ -179,6 +184,9 @@ base->cra_flags &= ~CRYPTO_ALG_TYPE_MASK; base->cra_flags |= CRYPTO_ALG_TYPE_RNG; + if (!alg->set_ent) + alg->set_ent = rng_default_set_ent; + return crypto_register_alg(base); } EXPORT_SYMBOL_GPL(crypto_register_rng); --- linux-riscv-6.17-6.17.0.orig/crypto/skcipher.c +++ linux-riscv-6.17-6.17.0/crypto/skcipher.c @@ -294,6 +294,8 @@ return crypto_init_lskcipher_ops_sg(tfm); } + crypto_skcipher_set_reqsize(skcipher, crypto_tfm_alg_reqsize(tfm)); + if (alg->exit) skcipher->base.exit = crypto_skcipher_exit_tfm; --- linux-riscv-6.17-6.17.0.orig/crypto/testmgr.c +++ linux-riscv-6.17-6.17.0/crypto/testmgr.c @@ -4186,6 +4186,7 @@ .alg = "authenc(hmac(sha1),cbc(aes))", .generic_driver = "authenc(hmac-sha1-lib,cbc(aes-generic))", .test = alg_test_aead, + .fips_allowed = 1, .suite = { .aead = __VECS(hmac_sha1_aes_cbc_tv_temp) } @@ -4206,6 +4207,7 @@ }, { .alg = "authenc(hmac(sha1),ctr(aes))", .test = alg_test_null, + .fips_allowed = 1, }, { .alg = "authenc(hmac(sha1),ecb(cipher_null))", .generic_driver = "authenc(hmac-sha1-lib,ecb-cipher_null)", @@ -4216,6 +4218,7 @@ }, { .alg = "authenc(hmac(sha1),rfc3686(ctr(aes)))", .test = alg_test_null, + .fips_allowed = 1, }, { .alg = "authenc(hmac(sha224),cbc(des))", .generic_driver = "authenc(hmac-sha224-lib,cbc(des-generic))", @@ -5078,6 +5081,7 @@ .alg = "hmac(sha1)", .generic_driver = "hmac-sha1-lib", .test = alg_test_hash, + .fips_allowed = 1, .suite = { .hash = __VECS(hmac_sha1_tv_template) } @@ -5448,6 +5452,7 @@ .alg = "sha1", .generic_driver = "sha1-lib", .test = alg_test_hash, + .fips_allowed = 1, .suite = { .hash = __VECS(sha1_tv_template) } --- linux-riscv-6.17-6.17.0.orig/crypto/zstd.c +++ linux-riscv-6.17-6.17.0/crypto/zstd.c @@ -75,15 +75,10 @@ return ret; } -static void zstd_exit(struct crypto_acomp *acomp_tfm) -{ - crypto_acomp_free_streams(&zstd_streams); -} - static int zstd_compress_one(struct acomp_req *req, struct zstd_ctx *ctx, const void *src, void *dst, unsigned int *dlen) { - unsigned int out_len; + size_t out_len; ctx->cctx = zstd_init_cctx(ctx->wksp, ctx->wksp_size); if (!ctx->cctx) @@ -297,7 +292,6 @@ .cra_module = THIS_MODULE, }, .init = zstd_init, - .exit = zstd_exit, .compress = zstd_compress, .decompress = zstd_decompress, }; @@ -310,6 +304,7 @@ static void __exit zstd_mod_fini(void) { crypto_unregister_acomp(&zstd_acomp); + crypto_acomp_free_streams(&zstd_streams); } module_init(zstd_mod_init); --- linux-riscv-6.17-6.17.0.orig/debian.master/changelog +++ linux-riscv-6.17-6.17.0/debian.master/changelog @@ -0,0 +1,33013 @@ +linux (6.17.0-16.16) questing; urgency=medium + + * questing/linux: 6.17.0-16.16 -proposed tracker (LP: #2141148) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2026.02.09) + + * Support Intel Scorpius Peak, Whale Peak WiFi/Bluetooth for Intel Panther + Lake platforms (LP: #2116169) + - Bluetooth: btintel_pcie: Add Bluetooth core/platform as comments + - Bluetooth: btintel_pcie: Add id of Scorpious, Panther Lake-H484 + + * Boot up hang with ucsi call trace while plug power cord or device on tbt5 + port (LP: #2127764) + - SAUCE: usb: typec: ucsi: Fix workqueue destruction race during connector + cleanup + + * net:rtnetlink.sh in ubuntu_kernel_selftests failed with FAIL: address + proto IPv4 / IPv6 (LP: #2031531) + - selftests: rtnetlink: skip tests if tools or feats are missing + + * TBT call trace while connecting TBT4 monitor on TBT5 port (LP: #2137613) + - drm/i915/psr: Do not unnecessarily remove underrun on idle PSR WA + + * No output on external monitor when connecting to dell dock (LP: #2131066) + - drm/i915/dsc: Add helper to enable the DSC configuration for a CRTC + - drm/i915/dp: Ensure the FEC state stays disabled for UHBR links + - drm/i915/dp: Export helper to determine if FEC on non-UHBR links is + required + - drm/i915/dp_mst: Reuse the DP-SST helper function to compute FEC config + - drm/i915/dp_mst: Track DSC enabled status on the MST link + - drm/i915/dp_mst: Recompute all MST link CRTCs if DSC gets enabled on the + link + - drm/i915/psr: Underrun on idle PSR wa only when pkgc latency > delayed + vblank + - drm/i915/display: Remove unused declarations of intel_io_* + - drm/i915/dp: Fix panel replay when DSC is enabled + + * [questing] kernel BUG at lib/string_helpers.c:1043! (LP: #2129580) + - erspan: Initialize options_len before referencing options. + + * Hotplug dock with monitor leads to call trace (LP: #2130998) + - drm/i915/psr: Check pause counter before continuing to PSR activation + - drm/i915/psr: Check PSR pause counter in __psr_wait_for_idle_locked + + * [SRU] Fix the error during suspend on cs42l43 (LP: #2138423) + - mfd: cs42l43: Remove IRQ masking in suspend + - ASoC: cs42l43: Rename system suspend callback and fix debug print + - ASoC: cs42l43: Store IRQ domain in codec private data + - ASoC: cs42l43: Disable IRQs in system suspend + - ASoC: cs42l43: Shutdown jack detection on suspend + + * noble/plucky: ubuntu_kselftests_ftrace fails 7 ftrace:test.d tests for + riscv64 on openstack:riscv64.vm (LP: #2124276) + - riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG + - [Config] Enable ARCH_HAVE_NMI_SAFE_CMPXCHG for riscv64 + + * Got call trace when plug in device/AC in type-c port(both TBT5/TBT4) + (LP: #2138192) + - usb: typec: ucsi: Add support for READ_POWER_LEVEL command + - usb: typec: ucsi: Add check for UCSI version + + * Export CWSR size to userspace (LP: #2134491) + - drm/amdkfd: bump minimum vgpr size for gfx1151 + - drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace + + * [SRU] add pmc c6 support of Arrow Lake (LP: #2137615) + - platform/x86:intel/pmc: Update Arrow Lake telemetry GUID + - platform/x86:intel/pmc: Add support for multiple DMU GUIDs + - platform/x86:intel/pmc: Add DMU GUID to Arrow Lake U/H + + * net:tap in ubuntu_kselftests_net fails on Noble (buffer overflow detected) + (LP: #2067642) + - SAUCE: selftests: net: fix "buffer overflow detected" for tap.c + + * MT7925 wifi is hard blocked on HP's machine (LP: #2127044) + - SAUCE: wifi: mt76: mt7925: add DMI quirk for HP Z2 Mini G1a Workstation + + * No on-screen keyboard on dell tablets (LP: #2122398) + - platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI + quirks + + * Enable RTL ASPM for more new Dell platforms (LP: #2133144) + - SAUCE: r8169: Add more Dell platforms to enable ASPM + + * Enable RTL ASPM for new Dell platforms (LP: #2121200) + - SAUCE: r8169: enable ASPM on all new Dell platforms + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) + - smack: deduplicate "does access rule request transmutation" + - smack: fix bug: SMACK64TRANSMUTE set on non-directory + - smack: deduplicate xattr setting in smack_inode_init_security() + - smack: always "instantiate" inode in smack_inode_init_security() + - smack: fix bug: invalid label of unix socket file + - smack: fix bug: setting task label silently ignores input garbage + - accel/ivpu: Ensure rpm_runtime_put in case of engine reset/resume fail + - drm/panel: visionox-rm69299: Fix clock frequency for SHIFT6mq + - drm/panel: visionox-rm69299: Don't clear all mode flags + - accel/ivpu: Rework bind/unbind of imported buffers + - accel/ivpu: Make function parameter names consistent + - accel/ivpu: Fix DCT active percent format + - bpf: Cleanup unused func args in rqspinlock implementation + - tools/nolibc: handle NULL wstatus argument to waitpid() + - USB: Fix descriptor count when handling invalid MBIM extended descriptor + - perf bpf_counter: Fix opening of "any"(-1) CPU events + - ima: Attach CREDS_CHECK IMA hook to bprm_creds_from_file LSM hook + - pinctrl: renesas: rzg2l: Fix PMC restore + - clk: renesas: cpg-mssr: Add missing 1ms delay into reset toggle callback + - clk: renesas: cpg-mssr: Read back reset registers to assure values + latched + - drm: atmel-hlcdc: fix atmel_xlcdc_plane_setup_scaler() + - HID: logitech-hidpp: Do not assume FAP in hidpp_send_message_sync() + - remoteproc: imx_rproc: Fix runtime PM cleanup and improve remove path + - objtool: Fix standalone --hacks=jump_label + - objtool: Fix weak symbol detection + - accel/ivpu: Fix race condition when mapping dmabuf + - perf parse-events: Fix legacy cache events if event is duplicated in a + PMU + - wifi: ath10k: move recovery check logic into a new work + - wifi: ath11k: restore register window after global reset + - wifi: ath12k: fix VHT MCS assignment + - wifi: ath12k: fix TX and RX MCS rate configurations in HE mode + - sched/fair: Forfeit vruntime on yield + - irqchip/bcm2712-mip: Fix OF node reference imbalance + - irqchip/bcm2712-mip: Fix section mismatch + - irqchip/irq-bcm7038-l1: Fix section mismatch + - irqchip/irq-bcm7120-l2: Fix section mismatch + - irqchip/irq-brcmstb-l2: Fix section mismatch + - irqchip/imx-mu-msi: Fix section mismatch + - irqchip/renesas-rzg2l: Fix section mismatch + - irqchip/starfive-jh8100: Fix section mismatch + - irqchip/qcom-irq-combiner: Fix section mismatch + - crypto: authenc - Correctly pass EINPROGRESS back up to the caller + - dt-bindings: clock: qcom,x1e80100-gcc: Add missing USB4 clocks/resets + - clk: qcom: gcc-x1e80100: Add missing USB4 clocks/resets + - rculist: Add hlist_nulls_replace_rcu() and + hlist_nulls_replace_init_rcu() + - inet: Avoid ehash lookup race in inet_ehash_insert() + - inet: Avoid ehash lookup race in inet_twsk_hashdance_schedule() + - iio: imu: st_lsm6dsx: Fix measurement unit for odr struct member + - firmware: qcom: tzmem: fix qcom_tzmem_policy kernel-doc + - block/mq-deadline: Introduce dd_start_request() + - block/mq-deadline: Switch back to a single dispatch list + - arm64: dts: freescale: imx8mp-venice-gw7905-2x: remove duplicate usdhc1 + props + - arm64: dts: imx8mm-venice-gw72xx: remove unused sdhc1 pinctrl + - arm64: dts: imx8mp-venice-gw702x: remove off-board uart + - arm64: dts: imx8mp-venice-gw702x: remove off-board sdhc1 + - arm64: dts: imx95-15x15-evk: add fan-supply property for pwm-fan + - perf annotate: Check return value of evsel__get_arch() properly + - arm64: dts: exynos: gs101: fix sysreg_apm reg property + - PCI: rcar-gen2: Drop ARM dependency from PCI_RCAR_GEN2 + - uio: uio_fsl_elbc_gpcm:: Add null pointer check to + uio_fsl_elbc_gpcm_probe + - tty: introduce tty_port_tty guard() + - tty: serial: imx: Only configure the wake register when device is set as + wakeup source + - clk: qcom: camcc-sm8550: Specify Titan GDSC power domain as a parent to + other + - clk: qcom: camcc-sm6350: Specify Titan GDSC power domain as a parent to + other + - clk: qcom: gcc-sm8750: Add a new frequency for sdcc2 clock + - clk: qcom: gcc-ipq5424: Correct the icc_first_node_id + - clk: qcom: camcc-sm6350: Fix PLL config of PLL2 + - clk: qcom: camcc-sm7150: Fix PLL config of PLL2 + - soc: qcom: gsbi: fix double disable caused by devm + - crypto: hisilicon/qm - restore original qos values + - wifi: ath11k: fix VHT MCS assignment + - s390/smp: Fix fallback CPU detection + - scsi: ufs: core: Move the ufshcd_enable_intr() declaration + - s390/ap: Don't leak debug feature files if AP instructions are not + available + - tools/power turbostat: Regression fix Uncore MHz printed in hex + - wifi: ath12k: restore register window after global reset + - leds: upboard: Fix module alias + - PCI: endpoint: pci-epf-test: Fix sleeping function being called from + atomic context + - arm64: dts: ti: k3-am62p: Fix memory ranges for GPU + - firmware: imx: scu-irq: fix OF node leak in + - arm64: dts: qcom: x1e80100: Fix compile warnings for USB HS controller + - arm64: dts: qcom: x1e80100: Add missing quirk for HS only USB controller + - arm64: dts: qcom: sdm845-starqltechn: remove (address|size)-cells + - arm64: dts: qcom: starqltechn: remove extra empty line + - arm64: dts: qcom: sdm845-starqltechn: fix max77705 interrupts + - arm64: dts: qcom: sdm845-oneplus: Correct gpio used for slider + - arm64: dts: qcom: qcm6490-fairphone-fp5: Add supplies to simple-fb node + - arm64: dts: qcom: sm8650: set ufs as dma coherent + - arm64: dts: qcom: qcm6490-shift-otter: Add missing reserved-memory + - arm64: dts: qcom: sdm845-starqltechn: Fix i2c-gpio node name + - perf hwmon_pmu: Fix uninitialized variable warning + - phy: mscc: Fix PTP for VSC8574 and VSC8572 + - sctp: Defer SCTP_DBG_OBJCNT_DEC() to sctp_destroy_sock(). + - arm64: dts: qcom: qcm2290: Add CCI node + - arm64: dts: qcom: qcm2290: Fix camss register prop ordering + - ARM: dts: renesas: gose: Remove superfluous port property + - ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties + - drm/amdgpu: add userq object va track helpers + - drm/amdgpu/userq: fix SDMA and compute validation + - wifi: iwlwifi: mld: add null check for kzalloc() in + iwl_mld_send_proto_offload() + - Revert "mtd: rawnand: marvell: fix layouts" + - mtd: nand: relax ECC parameter validation check + - mtd: rawnand: lpc32xx_slc: fix GPIO descriptor leak on probe error and + remove + - perf: Remove get_perf_callchain() init_nr argument + - bpf: Refactor stack map trace depth calculation into helper function + - perf/x86/intel/cstate: Remove PC3 support from LunarLake + - task_work: Fix NMI race condition + - x86/dumpstack: Prevent KASAN false positive warnings in __show_regs() + - accel/ivpu: Remove skip of dma unmap for imported buffers + - tools/nolibc/stdio: let perror work when NOLIBC_IGNORE_ERRNO is set + - tools/nolibc/dirent: avoid errno in readdir_r + - clk: qcom: gcc-qcs615: Update the SDCC clock to use shared_floor_ops + - soc: qcom: smem: fix hwspinlock resource leak in probe error paths + - pinctrl: stm32: fix hwspinlock resource leak in probe function + - drm: nova: select NOVA_CORE + - [Config] select NOVA_CORE + - gpu: nova-core: select RUST_FW_LOADER_ABSTRACTIONS + - pidfs: add missing PIDFD_INFO_SIZE_VER1 + - pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info + - i3c: fix refcount inconsistency in i3c_master_register + - i3c: master: svc: Prevent incomplete IBI transaction + - random: use offstack cpumask when necessary + - wifi: ath12k: fix potential memory leak in ath12k_wow_arp_ns_offload() + - wifi: ath12k: fix reusing m3 memory + - wifi: ath12k: fix error handling in creating hardware group + - wifi: ath12k: unassign arvif on scan vdev create failure + - interconnect: qcom: msm8996: add missing link to SLAVE_USB_HS + - arm64: dts: qcom: msm8996: add interconnect paths to USB2 controller + - accel/amdxdna: Fix incorrect command state for timed out job + - interconnect: debugfs: Fix incorrect error handling for NULL path + - arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name + and labels + - drm/imagination: Fix reference to + devm_platform_get_and_ioremap_resource() + - perf lock contention: Load kernel map before lookup + - perf record: skip synthesize event when open evsel failed + - timers/migration: Convert "while" loops to use "for" + - timers/migration: Remove locking on group connection + - timers/migration: Fix imbalanced NUMA trees + - power: supply: rt5033_charger: Fix device node reference leaks + - power: supply: cw2015: Check devm_delayed_work_autocancel() return code + - power: supply: max17040: Check iio_read_channel_processed() return code + - power: supply: rt9467: Return error on failure in + rt9467_set_value_from_ranges() + - power: supply: rt9467: Prevent using uninitialized local variable in + rt9467_set_value_from_ranges() + - power: supply: wm831x: Check wm831x_set_bits() return value + - power: supply: apm_power: only unset own apm_get_power_status + - scsi: target: Do not write NUL characters into ASCII configfs output + - scsi: target: Fix LUN/device R/W and total command stats + - fs/9p: Don't open remote file with APPEND mode when writeback cache is + used + - drm/panthor: Handle errors returned by drm_sched_entity_init() + - drm/panthor: Fix group_free_queue() for partially initialized queues + - drm/panthor: Fix race with suspend during unplug + - firmware: ti_sci: Set IO Isolation only if the firmware is capable + - cleanup: fix scoped_class() + - libbpf: Fix parsing of multi-split BTF + - ARM: dts: am335x-netcom-plus-2xx: add missing GPIO labels + - ARM: dts: omap3: beagle-xm: Correct obsolete TWL4030 power compatible + - ARM: dts: omap3: n900: Correct obsolete TWL4030 power compatible + - entry,unwind/deferred: Fix unwind_reset_info() placement + - x86/boot: Fix page table access in 5-level to 4-level paging transition + - efi/libstub: Fix page table access in 5-level to 4-level paging + transition + - locktorture: Fix memory leak in param_set_cpumask() + - wifi: rtw89: usb: use common error path for skbs in + rtw89_usb_rx_handler() + - wifi: rtw89: usb: fix leak in rtw89_usb_write_port() + - mfd: da9055: Fix missing regmap_del_irq_chip() in error path + - wifi: ath12k: Fix timeout error during beacon stats retrieval + - ext4: correct the checking of quota files before moving extents + - accel/amdxdna: Fix dma_fence leak when job is canceled + - io_uring: use WRITE_ONCE for user shared memory + - perf/x86/intel: Correct large PEBS flag check + - regulator: core: disable supply if enabling main regulator fails + - md: delete mddev kobj before deleting gendisk kobj + - scsi: stex: Fix reboot_notifier leak in probe error path + - [Config] remove most i2c driver + - iio: imu: bmi270: fix dev_err_probe error msg + - dt-bindings: PCI: amlogic: Fix the register name of the DBI region + - RDMA/rtrs: server: Fix error handling in get_or_create_srv + - ARM: dts: stm32: stm32mp157c-phycore: Fix STMPE811 touchscreen node + properties + - drm/panthor: Fix potential memleak of vma structure + - scsi: ufs: core: fix incorrect buffer duplication in + ufshcd_read_string_desc() + - md: delete md_redundancy_group when array is becoming inactive + - cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs + - powerpc/kdump: Fix size calculation for hot-removed memory ranges + - powerpc/32: Fix unpaired stwcx. on interrupt exit + - wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper() + - coresight: Change device mode to atomic type + - coresight: etm4x: Always set tracer's device mode on target CPU + - coresight: etm3x: Always set tracer's device mode on target CPU + - coresight: etm4x: Correct polling IDLE bit + - coresight: etm4x: Add context synchronization before enabling trace + - coresight: etm4x: Properly control filter in CPU idle with FEAT_TRF + - perf tools: Fix missing feature check for inherit + SAMPLE_READ + - drm/tidss: Remove max_pclk_khz and min_pclk_khz from tidss display + features + - drm/tidss: Move OLDI mode validation to OLDI bridge mode_valid hook + - clk: renesas: r9a09g077: Propagate rate changes to parent clocks + - clk: renesas: r9a06g032: Fix memory leak in error path + - lib/vsprintf: Check pointer before dereferencing in time_and_date() + - ocfs2: use correct endian in ocfs2_dinode_has_extents + - ACPI: property: Fix fwnode refcount leak in + acpi_fwnode_graph_parse_endpoint() + - scsi: sim710: Fix resource leak by adding missing ioport_unmap() calls + - leds: netxbig: Fix GPIO descriptor leak in error paths + - accel/amdxdna: Clear mailbox interrupt register during channel creation + - accel/amdxdna: Fix deadlock between context destroy and job timeout + - PCI: keystone: Exit ks_pcie_probe() for invalid mode + - arm64: dts: rockchip: Move the EEPROM to correct I2C bus on Radxa ROCK + 5A + - arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 5A + - arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 3C + - crypto: iaa - Fix incorrect return value in save_iaa_wq() + - arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm + - drm/msm/dpu: drop dpu_hw_dsc_destroy() prototype + - ps3disk: use memcpy_{from,to}_bvec index + - PCI: Prevent resource tree corruption when BAR resize fails + - bpf: Prevent nesting overflow in bpf_try_get_buffers + - bpf: Handle return value of ftrace_set_filter_ip in register_fentry + - selftests/bpf: Fix failure paths in send_signal test + - mshv: Fix deposit memory in MSHV_ROOT_HVCALL + - watchdog: wdat_wdt: Fix ACPI table leak in probe function + - watchdog: starfive: Fix resource leak in probe error path + - fuse_ctl_add_conn(): fix nlink breakage in case of early failure + - tracefs: fix a leak in eventfs_create_events_dir() + - NFSD/blocklayout: Fix minlength check in proc_layoutget + - arm64: dts: imx95-tqma9596sa: fix TPM5 pinctrl node name + - arm64: dts: imx95-tqma9596sa: reduce maximum FlexSPI frequency to 66MHz + - block/blk-throttle: Fix throttle slice time for SSDs + - drm/msm: Fix NULL pointer dereference in crashstate_get_vm_logs() + - drm/msm: fix missing NULL check after kcalloc in crashstate_get_bos() + - drm/msm/a2xx: stop over-complaining about the legacy firmware + - net: phy: Add helper for fixing RGMII PHY mode based on internal mac + delay + - net: stmmac: dwmac-sophgo: Add phy interface filter + - powerpc/64s/hash: Restrict stress_hpt_struct memblock region to within + RMA limit + - powerpc/64s/ptdump: Fix kernel_hash_pagetable dump for ISA v3.00 HPTE + format + - net: stmmac: Fix VLAN 0 deletion in vlan_del_hw_rx_fltr() + - fs/ntfs3: out1 also needs to put mi + - fs/ntfs3: Prevent memory leaks in add sub record + - drm/mediatek: Fix CCORR mtk_ctm_s31_32_to_s1_n function issue + - drm/msm/a6xx: Flush LRZ cache before PT switch + - drm/msm/a6xx: Fix the gemnoc workaround + - drm/msm/a6xx: Improve MX rail fallback in RPMH vote init + - spi: sophgo: Fix incorrect use of bus width value macros + - ipv6: clear RA flags when adding a static route + - perf arm_spe: Fix memset subclass in operation + - pwm: bcm2835: Make sure the channel is enabled after pwm_request() + - scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify + - net: phy: realtek: create rtl8211f_config_rgmii_delay() + - iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb + - wifi: mac80211: fix CMAC functions not handling errors + - mfd: mt6397-irq: Fix missing irq_domain_remove() in error path + - mfd: mt6358-irq: Fix missing irq_domain_remove() in error path + - of/fdt: Consolidate duplicate code into helper functions + - of/fdt: Fix incorrect use of dt_root_addr_cells in + early_init_dt_check_kho() + - leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM + - phy: renesas: rcar-gen3-usb2: Fix an error handling path in + rcar_gen3_phy_usb2_probe() + - phy: rockchip: naneng-combphy: Add SoC prefix to register definitions + - phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562 + - phy: freescale: Initialize priv->lock + - phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode + - phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth + - phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the + limits + - ASoC: SDCA: Fix missing dash in HIDE DisCo property + - selftests/bpf: Use ASSERT_STRNEQ to factor in long slab cache names + - net: phy: adin1100: Fix software power-down ready condition + - cpuset: Treat cpusets in attaching as populated + - clk: spacemit: Set clk_hw_onecell_data::num before using flex array + - RAS: Report all ARM processor CPER information to userspace + - usb: chaoskey: fix locking for O_NONBLOCK + - usb: dwc2: fix hang during shutdown if set as peripheral + - usb: dwc2: fix hang during suspend if set as peripheral + - usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE + - regulator: pca9450: Fix error code in probe() + - selftests/bpf: skip test_perf_branches_hw() on unsupported platforms + - selftests/bpf: Improve reliability of test_perf_branches_no_hw() + - crypto: ccree - Correctly handle return of sg_nents_for_len + - RISC-V: KVM: Fix guest page fault within HLV* instructions + - erofs: correct FSDAX detection + - RDMA/bnxt_re: Fix the inline size for GenP7 devices + - RDMA/bnxt_re: Pass correct flag for dma mr creation + - crypto: ahash - Fix crypto_ahash_import with partial block data + - crypto: ahash - Zero positive err value in ahash_update_finish + - ASoC: tas2781: correct the wrong period + - wifi: mt76: mt7921: add MBSSID support + - Revert "wifi: mt76: mt792x: improve monitor interface handling" + - wifi: mt76: mt7996: fix max nss value when getting rx chainmask + - wifi: mt76: mt7996: fix implicit beamforming support for mt7992 + - wifi: mt76: mt7996: fix several fields in mt7996_mcu_bss_basic_tlv() + - wifi: mt76: mt7996: fix teardown command for an MLD peer + - wifi: mt76: mt7996: set link_valid field when initializing wcid + - wifi: mt76: mt7996: fix MLD group index assignment + - wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart() + - wifi: mt76: mt7996: grab mt76 mutex in mt7996_mac_sta_event() + - wifi: mt76: mt7996: skip deflink accounting for offchannel links + - wifi: mt76: mt7996: Add missing locking in mt7996_mac_sta_rc_work() + - firmware: stratix10-svc: fix make htmldocs warning for stratix10_svc + - staging: fbtft: core: fix potential memory leak in fbtft_probe_common() + - iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables + - btrfs: fix leaf leak in an error path in btrfs_del_items() + - PCI: dwc: Fix wrong PORT_LOGIC_LTSSM_STATE_MASK definition + - drm/nouveau: restrict the flush page to a 32-bit address + - um: Don't rename vmap to kernel_vmap + - iomap: always run error completions in user context + - wifi: ieee80211: correct FILS status codes + - backlight: lp855x: Fix lp855x.h kernel-doc warnings + - iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare- + metal + - RDMA/irdma: Fix data race in irdma_sc_ccq_arm + - RDMA/irdma: Fix data race in irdma_free_pble + - RDMA/irdma: Do not directly rely on IB_PD_UNSAFE_GLOBAL_RKEY + - drm/panthor: Avoid adding of kernel BOs to extobj list + - clocksource/drivers/ralink: Fix resource leaks in init error path + - clocksource/drivers/stm: Fix double deregistration on probe failure + - clocksource/drivers/nxp-stm: Fix section mismatches + - clocksource/drivers/nxp-stm: Prevent driver unbind + - ASoC: nau8325: use simple i2c probe function + - ASoC: nau8325: add missing build config + - [Config] enable NAU8325 codec + - ASoC: fsl_xcvr: clear the channel status control memory + - firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER + - [Config] enable RUST_FW_LOADER_ABSTRACTIONS + - [Config] enable AMCC QT2025 PHY driver + - greybus: gb-beagleplay: Fix timeout handling in bootloader functions + - misc: rp1: Fix an error handling path in rp1_probe() + - drm/amd/display: Fix logical vs bitwise bug in + get_embedded_panel_info_v2_1() + - hwmon: sy7636a: Fix regulator_enable resource leak on error path + - ACPI: processor_core: fix map_x2apic_id for amd-pstate on am4 + - ublk: prevent invalid access with DEBUG + - ext4: improve integrity checking in __mb_check_buddy by enhancing + order-0 validation + - selftests/net: packetdrill: pass send_omit_free to MSG_ZEROCOPY tests + - of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root + node + - virtio_vdpa: fix misleading return in void function + - virtio: fix typo in virtio_device_ready() comment + - virtio: fix whitespace in virtio_config_ops + - virtio: fix grammar in virtio_queue_info docs + - virtio: fix virtqueue_set_affinity() docs + - vdpa/mlx5: Fix incorrect error code reporting in query_virtqueues + - vhost: Fix kthread worker cgroup failure handling + - vdpa/pds: use %pe for ERR_PTR() in event handler registration + - virtio: clean up features qword/dword terms + - ASoC: Intel: catpt: Fix error path in hw_params() + - spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was + short to GND + - ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system + suspend + - ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during + system suspend + - ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during + system suspend + - ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during + system suspend + - Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()" + - netfilter: flowtable: check for maximum number of encapsulations in + bridge vlan + - netfilter: nf_conncount: rework API to use sk_buff directly + - netfilter: nft_connlimit: update the count if add was skipped + - net: stmmac: fix rx limit check in stmmac_rx_zc() + - mtd: rawnand: renesas: Handle devm_pm_runtime_enable() errors + - vfio/pci: Use RCU for error/request triggers to avoid circular locking + - net: phy: aquantia: check for NVMEM deferral + - selftests: bonding: add delay before each xvlan_over_bond connectivity + check + - mtd: lpddr_cmds: fix signed shifts in lpddr_cmds + - rqspinlock: Enclose lock/unlock within lock entry acquisitions + - rqspinlock: Use trylock fallback when per-CPU rqnode is busy + - remoteproc: qcom_q6v5_wcss: fix parsing of qcom,halt-regs + - md/raid5: fix IO hang when array is broken with IO inflight + - clk: keystone: fix compile testing + - net: dsa: b53: fix VLAN_ID_IDX write size for BCM5325/65 + - net: dsa: b53: fix extracting VID from entry for BCM5325/65 + - net: dsa: b53: b53_arl_read{,25}(): use the entry for comparision + - net: dsa: b53: move reading ARL entries into their own function + - net: dsa: b53: move writing ARL entries into their own functions + - net: dsa: b53: provide accessors for accessing ARL_SRCH_CTL + - net: dsa: b53: split reading search entry into their own functions + - net: dsa: b53: move ARL entry functions into ops struct + - net: dsa: b53: add support for 5389/5397/5398 ARL entry format + - net: dsa: b53: use same ARL search result offset for BCM5325/65 + - net: dsa: b53: fix CPU port unicast ARL entries for BCM5325/65 + - net: dsa: b53: add support for bcm63xx ARL entry format + - net: dsa: b53: fix BCM5325/65 ARL entry multicast port masks + - net: dsa: b53: fix BCM5325/65 ARL entry VIDs + - net: hsr: create an API to get hsr port type + - net: dsa: xrs700x: reject unsupported HSR configurations + - perf jitdump: Add sym/str-tables to build-ID generation + - perf tools: Mark split kallsyms DSOs as loaded + - perf tools: Fix split kallsyms DSO counting + - perf hist: In init, ensure mem_info is put on error paths + - pinctrl: single: Fix incorrect type for error return variable + - fbdev: ssd1307fb: fix potential page leak in ssd1307fb_probe() + - 9p: fix cache/debug options printing in v9fs_show_options + - sched/fair: Fix unfairness caused by stalled tg_load_avg_contrib when + the last task migrates out + - sched/core: Fix psi_dequeue() for Proxy Execution + - f2fs: maintain one time GC mode is enabled during whole zoned GC cycle + - kbuild: install-extmod-build: Fix when given dir outside the build dir + - kbuild: install-extmod-build: Properly fix CC expansion when ccache is + used + - NFS: Avoid changing nlink when file removes and attribute updates race + - fs/nls: Fix utf16 to utf8 conversion + - NFS: Initialise verifiers for visible dentries in readdir and lookup + - NFS: Initialise verifiers for visible dentries in nfs_atomic_open() + - NFS: Initialise verifiers for visible dentries in + _nfs4_open_and_get_state + - panthor: save task pid and comm in panthor_group + - Revert "nfs: ignore SB_RDONLY when remounting nfs" + - Revert "nfs: clear SB_RDONLY before getting superblock" + - Revert "nfs: ignore SB_RDONLY when mounting nfs" + - NFS: Fix inheritance of the block sizes when automounting + - fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8() + - platform/x86: asus-wmi: use brightness_set_blocking() for kbd led + - ASoC: bcm: bcm63xx-pcm-whistler: Check return value of + of_dma_configure() + - ASoC: amd: acp: Audio is not resuming after s0ix + - ASoC: ak4458: Disable regulator when error happens + - ASoC: ak5558: Disable regulator when error happens + - f2fs: revert summary entry count from 2048 to 512 in 16kb block support + - blk-mq: Abort suspend when wakeup events are pending + - block: fix comment for op_is_zone_mgmt() to include RESET_ALL + - nvme-auth: use kvfree() for memory allocated with kvcalloc() + - drm/plane: Fix IS_ERR() vs NULL check in + drm_plane_create_hotspot_properties() + - regulator: fixed: Rely on the core freeing the enable GPIO + - drm/nouveau: refactor deprecated strcpy + - drm/nouveau: fix circular dep oops from vendored i2c encoder + - cifs: Fix handling of a beyond-EOF DIO/unbuffered read over SMB1 + - cifs: Fix handling of a beyond-EOF DIO/unbuffered read over SMB2 + - docs: hwmon: fix link to g762 devicetree binding + - i2c: spacemit: fix detect issue + - dma/pool: eliminate alloc_pages warning in atomic_pool_expand + - ALSA: uapi: Fix typo in asound.h comment + - drm/amdkfd: Use huge page size to check split svm range alignment + - rtc: gamecube: Check the return value of ioremap() + - rtc: max31335: Fix ignored return value in set_alarm + - ARM: 9464/1: fix input-only operand modification in + load_unaligned_zeropad() + - drm/xe/fbdev: use the same 64-byte stride alignment as i915 + - drm/i915/fbdev: make intel_framebuffer_create() error return handling + explicit + - drm/{i915, xe}/fbdev: pass struct drm_device to intel_fbdev_fb_alloc() + - drm/{i915, xe}/fbdev: deduplicate struct drm_mode_fb_cmd2 init + - drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation + - ASoC: amd: acp: update tdm channels for specific DAI + - dm-raid: fix possible NULL dereference with undefined raid type + - dm log-writes: Add missing set_freezable() for freezable kthread + - efi/cper: Add a new helper function to print bitmasks + - efi/cper: Adjust infopfx size to accept an extra space + - efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs + - perf/core: Fix missing read event generation on task exit + - cpu: Make atomic hotplug callbacks run with interrupts disabled on UP + - ocfs2: fix memory leak in ocfs2_merge_rec_left() + - perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common() + - usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt + - usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe() + - usb: phy: Initialize struct usb_phy list_head + - usb: dwc3: dwc3_power_off_all_roothub_ports: Use ioremap_np when + required + - ALSA: hda/realtek: Add match for ASUS Xbox Ally projects + - ALSA: hda/tas2781: fix speaker id retrieval for multiple probes + - ASoC: codecs: nau8325: Silence uninitialized variables warnings + - Linux 6.17.13 + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68344 + - ALSA: wavefront: Fix integer overflow in sample size validation + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68345 + - ALSA: hda: cs35l41: Fix NULL pointer dereference in + cs35l41_hda_read_acpi() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68346 + - ALSA: dice: fix buffer overflow in detect_stream_formats() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68323 + - usb: typec: ucsi: fix use-after-free caused by uec->work + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68766 + - irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68324 + - scsi: imm: Fix use-after-free bug caused by unfinished delayed work + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68756 + - block: Use RCU in blk_mq_[un]quiesce_tagset() instead of + set->tag_list_lock + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68753 + - ALSA: firewire-motu: add bounds check in put_user loop for DSP events + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68347 + - ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68348 + - block: fix memory leak in __blkdev_issue_zero_pages + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68764 + - NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68735 + - drm/panthor: Prevent potential UAF in group creation + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68349 + - NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in + pnfs_mark_layout_stateid_invalid + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68754 + - rtc: amlogic-a4: fix double free caused by devm + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68325 + - net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68762 + - net: netpoll: initialize work queue before error checks + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68352 + - spi: ch341: fix out-of-bounds memory access in ch341_transfer_one + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68752 + - iavf: Implement settime64 with -EOPNOTSUPP + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68354 + - regulator: core: Protect regulator_supply_alias_list with + regulator_list_mutex + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68356 + - gfs2: Prevent recursive memory reclaim + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68758 + - backlight: led-bl: Add devlink to supplier LEDs + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68358 + - btrfs: fix racy bitfield write in btrfs_clear_space_info_full() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68359 + - btrfs: fix double free of qgroup record after failure to add delayed ref + head + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68765 + - mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68360 + - wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacks + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68738 + - wifi: mt76: mt7996: fix null pointer deref in mt7996_conf_tx() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68361 + - erofs: limit the level of fs stacking for file-backed mounts + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68739 + - PM / devfreq: hisi: Fix potential UAF in OPP handling + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68763 + - crypto: starfive - Correctly handle return of sg_nents_for_len + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68740 + - ima: Handle error code returned by ima_filter_rule_match() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68362 + - wifi: rtl818x: rtl8187: Fix potential buffer underflow in + rtl8187_rx_cb() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68741 + - scsi: qla2xxx: Fix improper freeing of purex item + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68742 + - bpf: Fix invalid prog->stats access when update_effective_progs fails + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68759 + - wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68743 + - mshv: Fix create memory region overlap check + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68363 + - bpf: Check skb->transport_header is set in bpf_skb_check_mtu + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68751 + - s390/fpu: Fix false-positive kmsan report in fpu_vstl() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68744 + - bpf: Free special fields when update [lru_,]percpu_hash maps + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68364 + - ocfs2: relax BUG() to ocfs2_error() in __ocfs2_move_extent() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68366 + - nbd: defer config unlock in nbd_genl_connect + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68367 + - macintosh/mac_hid: fix race condition in mac_hid_toggle_emumouse + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68369 + - ntfs3: init run lock for extend inode + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68370 + - coresight: tmc: add the handle of the event to the path + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68755 + - staging: most: remove broken i2c driver + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68371 + - scsi: smartpqi: Fix device resources accessed after device removal + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68372 + - nbd: defer config put in recv_work + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68373 + - md: avoid repeated calls to del_gendisk + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68374 + - md: fix rcu protection in md_wakeup_thread + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68375 + - perf/x86: Fix NULL event access and potential PEBS record loss + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68376 + - coresight: ETR: Fix ETR buffer use-after-free issue + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68746 + - spi: tegra210-quad: Fix timeout handling + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68760 + - iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68747 + - drm/panthor: Fix UAF on kernel BO VA nodes + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68748 + - drm/panthor: Fix UAF race between device unplug and FW event processing + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68749 + - accel/ivpu: Fix race condition when unbinding BOs + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68378 + - bpf: Fix stackmap overflow check in __bpf_get_stackid() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68379 + - RDMA/rxe: Fix null deref on srq->rq.queue after resize failure + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68380 + - wifi: ath11k: fix peer HE MCS assignment + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68724 + - crypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68726 + - crypto: aead - Fix reqsize handling + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68727 + - ntfs3: Fix uninit buffer allocated by __getname() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68728 + - ntfs3: fix uninit memory after failed mi_read in mi_format_new + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68729 + - wifi: ath12k: Fix MSDU buffer types handling in RX error path + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68757 + - drm/vgem-fence: Fix potential deadlock on release + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68730 + - accel/ivpu: Fix page fault in ivpu_bo_unbind_all_bos_from_context() + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68732 + - gpu: host1x: Fix race in syncpt alloc/free + + * Questing update: v6.17.13 upstream stable release (LP: #2139960) // + CVE-2025-68733 + - smack: fix bug: unprivileged task can create labels + + * Questing update: v6.17.12 upstream stable release (LP: #2139373) + - Documentation: process: Also mention Sasha Levin as stable tree + maintainer + - jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system + corrupted + - ext4: refresh inline data size before write operations + - ksmbd: ipc: fix use-after-free in ipc_msg_send_request + - locking/spinlock/debug: Fix data-race in do_raw_write_lock + - crypto: zstd - fix double-free in per-CPU stream cleanup + - ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock() + - comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel() + - KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced + - USB: serial: option: add Foxconn T99W760 + - USB: serial: option: add Telit Cinterion FE910C04 new compositions + - USB: serial: option: move Telit 0x10c7 composition in the right place + - USB: serial: ftdi_sio: match on interface number for jtag + - serial: add support of CPCI cards + - dt-bindings: serial: rsci: Drop "uart-has-rtscts: false" + - serial: sh-sci: Fix deadlock during RSCI FIFO overrun error + - USB: serial: belkin_sa: fix TIOCMBIS and TIOCMBIC + - USB: serial: kobil_sct: fix TIOCMBIS and TIOCMBIC + - ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct() + - spi: xilinx: increase number of retries before declaring stall + - spi: imx: keep dma request disabled before dma transfer setup + - ACPI: MRRM: Fix memory leaks and improve error handling + - drm/vmwgfx: Use kref in vmw_bo_dirty + - arm64: Reject modules with internal alternative callbacks + - ALSA: hda/tas2781: Add new quirk for HP new projects + - Bluetooth: btrtl: Avoid loading the config file on security chips + - ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list + - smb: fix invalid username check in smb3_fs_context_parse_param() + - drm/amdkfd: Fix GPU mappings for APU after prefetch + - ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series + - HID: lenovo: fixup Lenovo Yoga Slim 7x Keyboard rdesc + - bfs: Reconstruct file type when loading from disk + - HID: hid-input: Extend Elan ignore battery quirk to USB + - platform/x86/amd/pmc: Add support for Van Gogh SoC + - platform/x86: hp-wmi: mark Victus 16-r0 and 16-s0 for victus_s fan and + thermal profile support + - nvme: fix admin request_queue lifetime + - pinctrl: qcom: msm: Fix deadlock in pinmux configuration + - platform/x86: acer-wmi: Ignore backlight event + - HID: apple: Add SONiX AK870 PRO to non_apple_keyboards quirk list + - platform/x86: huawei-wmi: add keys for HONOR models + - platform/x86: intel-uncore-freq: Add additional client processors + - platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list + - platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally + - sched_ext: Fix possible deadlock in the deferred_irq_workfn() + - platform/x86/intel/hid: Add Nova Lake support + - HID: elecom: Add support for ELECOM M-XT3URBK (018F) + - sched_ext: Use IRQ_WORK_INIT_HARD() to initialize + rq->scx.kick_cpus_irq_work + - LoongArch: Mask all interrupts during kexec/kdump + - samples: work around glibc redefining some of our defines wrong + - platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support + - platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal + profile + - wifi: rtl8xxxu: Add USB ID 2001:3328 for D-Link AN3U rev. A1 + - wifi: rtw88: Add USB ID 2001:3329 for D-Link AC13U rev. A1 + - iio: adc: ad4080: fix chip identification + - comedi: c6xdigio: Fix invalid PNP driver unregistration + - comedi: multiq3: sanitize config options in multiq3_attach() + - comedi: check device's attached status in compat ioctls + - staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser + - staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsing + - staging: rtl8723bs: fix out-of-bounds read in OnBeacon ESR IE parsing + - Linux 6.17.12 + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) + - Bluetooth: hci_core: Fix triggering cmd_timer for HCI_OP_NOP + - Bluetooth: SMP: Fix not generating mackey and ltk when repairing + - drm/bridge: sii902x: Fix HDMI detection with + DRM_BRIDGE_ATTACH_NO_CONNECTOR + - net: phy: mxl-gpy: fix bogus error on USXGMII and integrated PHY + - net: aquantia: Add missing descriptor cache invalidation on ATL2 + - net: phy: mxl-gpy: fix link properties on USXGMII and internal PHYs + - net: lan966x: Fix the initialization of taprio + - drm/xe: Fix conversion from clock ticks to milliseconds + - net/mlx5e: Fix validation logic in rate limiting + - xsk: avoid overwriting skb fields for multi-buffer traffic + - drm/amdgpu: fix cyan_skillfish2 gpu info fw handling + - dma-direct: Fix missing sg_dma_len assignment in P2PDMA bus mappings + - net: wwan: mhi: Keep modem name match with Foxconn T99W640 + - net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing + traffic + - eth: fbnic: Fix counter roll-over issue + - net: mctp: unconditionally set skb->dev on dst output + - net: fec: cancel perout_timer when PEROUT is disabled + - net: fec: do not update PEROUT if it is enabled + - net: fec: do not allow enabling PPS and PEROUT simultaneously + - net: fec: do not register PPS event for PEROUT + - iio: st_lsm6dsx: Fixed calibrated timestamp calculation + - usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors + - mailbox: mailbox-test: Fix debugfs_create_dir error checking + - mailbox: mtk-cmdq: Refine DMA address handling for the command buffer + - mailbox: pcc: don't zero error register + - spi: spi-cadence-quadspi: Remove duplicate pm_runtime_put_autosuspend() + call + - spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance + - ovl: fail ovl_lock_rename_workdir() if either target is unhashed + - riscv: dts: allwinner: d1: fix vlenb property + - spi: tegra114: remove Kconfig dependency on TEGRA20_APB_DMA + - spi: amlogic-spifc-a1: Handle devm_pm_runtime_enable() errors + - spi: spi-nxp-fspi: Add OCT-DTR mode support + - spi: nxp-fspi: Propagate fwnode in ACPI case as well + - spi: bcm63xx: fix premature CS deassertion on RX-only transactions + - afs: Fix uninit var in afs_alloc_anon_key() + - timekeeping: Fix error code in tk_aux_sysfs_init() + - Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()" + - iio: buffer-dma: support getting the DMA channel + - iio: buffer-dmaengine: enable .get_dma_dev() + - iio: buffer: support getting dma channel from the buffer + - iio: humditiy: hdc3020: fix units for temperature and humidity + measurement + - iio: humditiy: hdc3020: fix units for thresholds and hysteresis + - iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields + - iio: pressure: bmp280: correct meas_time_us calculation + - iio:common:ssp_sensors: Fix an error handling path ssp_probe() + - iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling + - iio: accel: fix ADXL355 startup race condition + - iio: adc: ad4030: Fix _scale value for common-mode channels + - iio: adc: ad7124: fix temperature channel + - iio: adc: ad7280a: fix ad7280_store_balance_timer() + - iio: adc: ad7380: fix SPI offload trigger rate + - iio: adc: rtq6056: Correct the sign bit index + - MIPS: mm: Prevent a TLB shutdown on initial uniquification + - MIPS: mm: kmalloc tlb_vpn array to avoid stack overflow + - virtio-net: avoid unnecessary checksum calculation on guest RX + - vhost: rewind next_avail_head while discarding descriptors + - ALSA: hda/cirrus fix cs420x MacPro 6,1 inverted jack detection + - ALSA: usb-audio: Add DSD quirk for LEAK Stereo 230 + - arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos + - arm64: dts: imx8dxl: Correct pcie-ep interrupt number + - arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity + - ARM: dts: nxp: imx6ul: correct SAI3 interrupt line + - can: rcar_canfd: Fix CAN-FD mode as default + - can: sja1000: fix max irq loop handling + - can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling + - counter: microchip-tcb-capture: Allow shared IRQ for multi-channel TCBs + - dm-verity: fix unreliable memory allocation + - drivers/usb/dwc3: fix PCI parent check + - thunderbolt: Add support for Intel Wildcat Lake + - slimbus: ngd: Fix reference count leak in qcom_slim_ngd_notify_slaves + - nvmem: layouts: fix nvmem_layout_bus_uevent + - pmdomain: tegra: Add GENPD_FLAG_NO_STAY_ON flag + - r8169: fix RTL8127 hang on suspend/shutdown + - regulator: rtq2208: Correct buck group2 phase mapping logic + - regulator: rtq2208: Correct LDO2 logic judgment bits + - iommufd/driver: Fix counter initialization for counted_by annotation + - mmc: sdhci-of-dwcmshc: Promote the th1520 reset handling to ip level + - mptcp: clear scheduled subflows on retransmit + - mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in + mptcp_do_fastclose(). + - serial: 8250: Fix 8250_rsa symbol loop + - serial: amba-pl011: prefer dma_mapping_error() over explicit address + checking + - usb: cdns3: Fix double resource release in cdns3_pci_probe + - USB: storage: Remove subclass and protocol overrides from Novatek quirk + - usb: typec: ucsi: psy: Set max current to zero when disconnected + - usb: dwc3: pci: add support for the Intel Nova Lake -S + - usb: dwc3: pci: Sort out the Intel device IDs + - xhci: fix stale flag preventig URBs after link state error is cleared + - xhci: dbgtty: Fix data corruption when transmitting data form DbC to + host + - xhci: dbgtty: fix device unregister + - USB: serial: ftdi_sio: add support for u-blox EVK-M101 + - USB: serial: option: add support for Rolling RW101R-GL + - drm: sti: fix device leaks at component probe + - drm/i915/psr: Reject async flips when selective fetch is enabled + - drm/amdgpu: attach tlb fence to the PTs update + - drm/amd/amdgpu: reserve vm invalidation engine for uni_mes + - drm/amd/display: Don't change brightness for disabled connectors + - drm/amd/display: Increase EDID read retries + - net: dsa: microchip: common: Fix checks on irq_find_mapping() + - net: dsa: microchip: ptp: Fix checks on irq_find_mapping() + - net: dsa: microchip: Free previously initialized ports on init failures + - net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}() + - mm: swap: remove duplicate nr_swap_pages decrement in + get_swap_page_of_type() + - usb: udc: Add trace event for usb_gadget_set_state + - Revert "ACPI: Suppress misleading SPCR console message when SPCR table + is absent" + - spi: cadence-quadspi: Fix cqspi_probe() error handling for runtime pm + - Linux 6.17.11 + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68282 + - usb: gadget: udc: fix use-after-free in usb_gadget_state_work + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68283 + - libceph: replace BUG_ON with bounds check for map->max_osd + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68284 + - libceph: prevent potential out-of-bounds writes in + handle_auth_session_key() + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68285 + - libceph: fix potential use-after-free in have_mon_and_osd_map() + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68338 + - net: dsa: microchip: Don't free uninitialized ksz_irq + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68286 + - drm/amd/display: Check NULL before accessing + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68326 + - drm/xe/guc: Fix stack_depot usage + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68287 + - usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() + call paths + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68331 + - usb: uas: fix urb unmapping issue when the uas device is remove during + ongoing data transfer + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-40345 + - usb: storage: sddr55: Reject out-of-bound new_pba + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68288 + - usb: storage: Fix memory leak in USB bulk transport + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68327 + - usb: renesas_usbhs: Fix synchronous external abort on unbind + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68289 + - usb: gadget: f_eem: Fix memory leak in eem_unwrap + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68290 + - most: usb: fix double free on late probe failure + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68292 + - mm/memfd: fix information leak in hugetlb folios + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68293 + - mm/huge_memory: fix NULL pointer deference when splitting folio + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68328 + - firmware: stratix10-svc: fix bug in saving controller data + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68294 + - io_uring/net: ensure vectored buffer node import is tied to notification + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68295 + - smb: client: fix memory leak in cifs_construct_tcon() + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68296 + - drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setup + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68297 + - ceph: fix crash in process_v2_sparse_read() for encrypted directories + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68298 + - Bluetooth: btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68339 + - atm/fore200e: Fix possible data race in fore200e_open() + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68329 + - tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68330 + - iio: accel: bmc150: Fix irq assumption regression + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68299 + - afs: Fix delayed allocation of a cell's anonymous key + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68300 + - fs/namespace: fix reference leak in grab_requested_mnt_ns + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68301 + - net: atlantic: fix fragment overflow handling in RX path + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-40290 + - xsk: avoid data corruption on cq descriptor number + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68302 + - net: sxgbe: fix potential NULL dereference in sxgbe_rx() + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68340 + - team: Move team device type change at the end of team_port_add + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68303 + - platform/x86: intel: punit_ipc: fix memory corruption + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68341 + - veth: reduce XDP no_direct return section to fix race + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68304 + - Bluetooth: hci_core: lookup hci_conn on RX path on protocol side + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68305 + - Bluetooth: hci_sock: Prevent race in socket write iter and sock bind + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68306 + - Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso + interface + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68342 + - can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before + accessing data + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68343 + - can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before + accessing header + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68307 + - can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted + URBs + + * Questing update: v6.17.11 upstream stable release (LP: #2138824) // + CVE-2025-68308 + - can: kvaser_usb: leaf: Fix potential infinite loop in command parsers + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) + - arm64: dts: rockchip: Remove non-functioning CPU OPPs from RK3576 + - HID: amd_sfh: Stop sensor before starting + - HID: quirks: work around VID/PID conflict for 0x4c4a/0x4155 + - arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2 + - arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5 + - reset: imx8mp-audiomix: Fix bad mask values + - arm64: dts: rockchip: include rk3399-base instead of rk3399 in + rk3399-op1 + - arm64: dts: rockchip: disable HS400 on RK3588 Tiger + - KVM: SVM: Fix redundant updates of LBR MSR intercepts + - xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super + - isofs: check the return value of sb_min_blocksize() in isofs_fill_super + - shmem: fix tmpfs reconfiguration (remount) when noswap is set + - exfat: check return value of sb_min_blocksize in exfat_read_boot_sector + - mptcp: Disallow MPTCP subflows from sockmap + - s390/mm: Fix __ptep_rdp() inline assembly + - ACPI: APEI: EINJ: Fix EINJV2 initialization and injection + - ata: libata-scsi: Fix system suspend for a security locked drive + - selinux: rename task_security_struct to cred_security_struct + - selinux: move avdcache to per-task security struct + - smb: client: introduce close_cached_dir_locked() + - wifi: rtw89: hw_scan: Don't let the operating channel be last + - ata: libata-scsi: Add missing scsi_device_put() in ata_scsi_dev_rescan() + - net: dsa: microchip: lan937x: Fix RGMII delay tuning + - Revert "drm/tegra: dsi: Clear enable register if powered by bootloader" + - Input: goodix - add support for ACPI ID GDIX1003 + - nvme: nvme-fc: move tagset removal to nvme_fc_delete_ctrl() + - PM: sleep: core: Fix runtime PM enabling in device_resume_early() + - MIPS: Malta: Fix !EVA SOC-it PCI MMIO + - dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups + - LoongArch: Don't panic if no valid cache info for PCI + - LoongArch: Fix NUMA node parsing with numa_memblks + - platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order + - platform/x86: alienware-wmi-wmax: Add support for the whole "M" family + - platform/x86: alienware-wmi-wmax: Add support for the whole "X" family + - platform/x86: alienware-wmi-wmax: Add support for the whole "G" family + - platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 + Aurora + - mptcp: fix ack generation for fallback msk + - mptcp: fix duplicate reset on fastclose + - mptcp: fix premature close in case of fallback + - selftests: mptcp: join: endpoints: longer timeout + - selftests: mptcp: join: userspace: longer timeout + - mptcp: avoid unneeded subflow-level drops + - mptcp: decouple mptcp fastclose from tcp close + - mptcp: do not fallback when OoO is present + - drm/tegra: dc: Fix reference leak in tegra_dc_couple() + - drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabled + - drm/amd/display: Increase DPCD read retries + - drm/amd/display: Move sleep into each retry for retrieve_link_cap() + - drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5 + - mm/truncate: unmap large folio on split failure + - pinctrl: mediatek: mt8196: align register base names to dt-bindings ones + - pinctrl: mediatek: mt8189: align register base names to dt-bindings ones + - xfrm: drop SA reference in xfrm_state_update if dir doesn't match + - xfrm: call xfrm_dev_state_delete when xfrm_state_migrate fails to add + the state + - xfrm: set err and extack on failure to create pcpu SA + - clk: sunxi-ng: Mark A523 bus-r-cpucfg clock as critical + - clk: sunxi-ng: sun55i-a523-r-ccu: Mark bus-r-dma as critical + - clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate + - pinctrl: realtek: Select REGMAP_MMIO for RTD driver + - xfrm: Check inner packet family directly from skb_dst + - xfrm: Determine inner GSO type from packet inner protocol + - xfrm: Prevent locally generated packets from direct output in tunnel + mode + - pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe() + - platform/x86: msi-wmi-platform: Only load on MSI devices + - platform/x86: msi-wmi-platform: Fix typo in WMI GUID + - mips: dts: econet: fix EN751221 core type + - mlxsw: spectrum: Fix memory leak in mlxsw_sp_flower_stats() + - net: dsa: hellcreek: fix missing error handling in LED registration + - net: mlxsw: linecards: fix missing error check in + mlxsw_linecard_devlink_info_get() + - tools: riscv: Fixed misalignment of CSR related definitions + - nvmet-auth: update sc_c in target host hash calculation + - drm/i915/xe3lpd: Load DMC for Xe3_LPD version 30.02 + - selftests: net: lib: Do not overwrite error messages + - net: airoha: Add wlan flowtable TX offload + - net: airoha: Do not loopback traffic to GDM2 if it is available on the + device + - platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to + errnos + - platform/x86: intel-uncore-freq: fix all header kernel-doc warnings + - drm/pcids: Split PTL pciids group to make wcl subplatform + - drm/i915/display: Add definition for wcl as subplatform + - drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY A + - drm/xe/kunit: Fix forcewake assertion in mocs test + - drm/xe/irq: Handle msix vector0 interrupt + - pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc() + - af_unix: Read sk_peek_offset() again after sleeping in + unix_stream_read_generic(). + - net: phylink: add missing supported link modes for the fixed-link + - tick/sched: Fix bogus condition in report_idle_softirq() + - LoongArch: Use UAPI types in ptrace UAPI header + - perf: Fix 0 count issue of cpu-clock + - timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths + - MIPS: kernel: Fix random segmentation faults + - ALSA: hda/realtek: Add quirk for Lenovo Yoga 7 2-in-1 14AKP10 + - sched_ext: Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc() + - bcma: don't register devices disabled in OF + - sched_ext: defer queue_balance_callback() until after ops.dispatch + - ASoC: rt721: fix prepare clock stop failed + - cifs: fix typo in enable_gcm_256 module parameter + - scsi: core: Fix a regression triggered by scsi_host_busy() + - ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D) + - perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake + - x86/microcode/AMD: Limit Entrysign signature checking to known + generations + - selftests: cachestat: Fix warning on declaration under label + - smb: client: handle lack of IPC in dfs_cache_refresh() + - net: tls: Change async resync helpers argument + - blk-crypto: use BLK_STS_INVAL for alignment errors + - net: tls: Cancel RX async resync request on rcd_delta overflow + - x86/CPU/AMD: Extend Zen6 model range + - kconfig/mconf: Initialize the default locale at startup + - kconfig/nconf: Initialize the default locale at startup + - drm/xe: Prevent BIT() overflow when handling invalid prefetch region + - ALSA: usb-audio: fix uac2 clock source at terminal parser + - tracing/tools: Fix incorrcet short option in usage text for --threads + - btrfs: set inode flag BTRFS_INODE_COPY_EVERYTHING when logging new name + - smb: client: fix incomplete backport in cfids_invalidation_worker() + - drm/amdgpu/jpeg: Move parse_cs to amdgpu_jpeg.c + - drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1 + - xfs: Replace strncpy with memcpy + - drm/amd/display: Insert dccg log for easy debug + - drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched + - tty/vt: fix up incorrect backport to stable releases + - Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4" + - drm/i915/dp: Add device specific quirk to limit eDP rate to HBR2 + - sched_ext: Fix scx_kick_pseqs corruption on concurrent scheduler loads + - sched_ext: fix flag check for deferred callbacks + - Linux 6.17.10 + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68221 + - mptcp: fix address removal logic in mptcp_pm_nl_rm_addr + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40246 + - xfs: fix out of bounds memory read error in symlink repair + + * Intel,External monitor flickers or no output when connected to WD25 dock + (LP: #2136979) // Questing update: v6.17.10 upstream stable release + (LP: #2137723) + - drm/i915/psr: Check drm_dp_dpcd_read return value on PSR dpcd init + - drm/i915/dp_mst: Disable Panel Replay + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68230 + - drm/amdgpu: fix gpu page fault after hibernation on PF passthrough + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68220 + - net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return + NULL on error + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68236 + - scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40247 + - drm/msm: Fix pgtable prealloc error path + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40248 + - vsock: Ignore signal/timeout on connect() if already established + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68219 + - cifs: fix memory leak in smb3_fs_context_parse_param error path + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40249 + - gpio: cdev: make sure the cdev fd is still active before emitting events + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40250 + - net/mlx5: Clean up only new IRQ glue on request_irq() failure + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40251 + - devlink: rate: Unset parent pointer in devl_rate_nodes_destroy + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68222 + - pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68215 + - ice: fix PTP cleanup on driver removal in error path + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68213 + - idpf: fix possible vport_config NULL pointer deref in remove + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40252 + - net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() + and qede_tpa_end() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40253 + - s390/ctcm: Fix double-kfree + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68218 + - nvme-multipath: fix lockdep WARN due to partition scan work + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68232 + - veth: more robust handing of race to avoid txq getting stuck + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40254 + - net: openvswitch: remove never-working support for setting nsh fields + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68233 + - drm/tegra: Add call to put_pid() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40255 + - net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68228 + - drm/plane: Fix create_in_format_blob() return value + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68223 + - drm/radeon: delete radeon_fence_process in is_signaled, no deadlock + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40257 + - mptcp: fix a race in mptcp_pm_del_add_timer() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40258 + - mptcp: fix race condition in mptcp_schedule_work() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68216 + - LoongArch: BPF: Disable trampoline for kernel module function trace + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68229 + - scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40259 + - scsi: sg: Do not sleep in atomic context + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40260 + - sched_ext: Fix scx_enable() crash on helper kthread creation failure + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40261 + - nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68235 + - nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68231 + - mm/mempool: fix poisoning order>0 pages with HIGHMEM + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68217 + - Input: pegasus-notetaker - fix potential out-of-bounds access + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40262 + - Input: imx_sc_key - fix memory corruption on unload + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40263 + - Input: cros_ec_keyb - fix an invalid memory access + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68234 + - io_uring/cmd_net: fix wrong argument types for skb_queue_splice() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40264 + - be2net: pass wrb_params in case of OS2BMC + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68225 + - lib/test_kho: check if KHO is enabled + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68227 + - mptcp: Fix proto fallback detection with BPF + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68237 + - mtdchar: fix integer overflow in read/write ioctls + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68212 + - fs: Fix uninitialized 'offp' in statmount_string() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68238 + - mtd: rawnand: cadence: fix DMA device NULL pointer dereference + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40265 + - vfat: fix missing sb_min_blocksize() return value checks + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-68214 + - timers: Fix NULL function pointer race in timer_shutdown_sync() + + * Questing update: v6.17.10 upstream stable release (LP: #2137723) // + CVE-2025-40266 + - KVM: arm64: Check the untrusted offset in FF-A memory share + + -- Edoardo Canepa Sat, 07 Feb 2026 11:03:42 +0100 + +linux (6.17.0-14.14) questing; urgency=medium + + * questing/linux: 6.17.0-14.14 -proposed tracker (LP: #2137849) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2026.01.12) + + * ubuntu_kselftests:_net/net:gre_gso.sh failing (LP: #2136820) + - SAUCE increase socat timeout in gre_gso.sh + + * ubuntu_blktrace_smoke_test fails on questing with rust coreutils + (LP: #2137698) + - SAUCE: Revert "ext4: fail unaligned direct IO write with EINVAL" + + * bareudp.sh in ubuntu_kselftests_net fails because of dash default shell + (LP: #2129812) + - selftests: net: use BASH for bareudp testing + + * CVE-2025-40256 + - xfrm: also call xfrm_state_delete_tunnel at destroy time for states that + were never added + + * Enable PMF on AMD HPT/STX/KRK (LP: #2125022) + - platform/x86/amd/pmf: Add support for adjusting PMF PPT and PPT APU + thresholds + - platform/x86/amd/pmf: Extend custom BIOS inputs for more policies + - platform/x86/amd/pmf: Update ta_pmf_action structure member + - platform/x86/amd/pmf: Add helper to verify BIOS input notifications are + enable/disable + - platform/x86/amd/pmf: Add custom BIOS input support for AMD_CPU_ID_PS + - platform/x86/amd/pmf: Preserve custom BIOS inputs for evaluating the + policies + - platform/x86/amd/pmf: Call enact function sooner to process early + pending requests + - platform/x86/amd/pmf: Add debug logs for pending requests and custom + BIOS inputs + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) + - iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents() + - drm/mediatek: Add pm_runtime support for GCE power control + - drm/i915: Fix conversion between clock ticks and nanoseconds + - drm/amdgpu: set default gfx reset masks for gfx6-8 + - drm/amd/display: Don't stretch non-native images by default in eDP + - smb: client: fix refcount leak in smb2_set_path_attr + - iommufd: Make vfio_compat's unmap succeed if the range is already empty + - futex: Optimize per-cpu reference counting + - drm/amd: Fix suspend failure with secure display TA + - drm/xe: Move declarations under conditional branch + - drm/xe: Do clean shutdown also when using flr + - drm/amd/display: Add pixel_clock to amd_pp_display_configuration + - drm/amd/pm: Use pm_display_cfg in legacy DPM (v2) + - drm/amd/display: Disable fastboot on DCE 6 too + - drm/amd/pm: Disable MCLK switching on SI at high pixel clocks + - drm/amd: Disable ASPM on SI + - arm64: kprobes: check the return value of set_memory_rox() + - compiler_types: Move unused static inline functions warning to W=2 + - riscv: Build loader.bin exclusively for Canaan K210 + - RISC-V: clear hot-unplugged cores from all task mm_cpumasks to avoid + rfence errors + - riscv: acpi: avoid errors caused by probing DT devices when ACPI is used + - fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls + - ASoC: nau8821: Avoid unnecessary blocking in IRQ handler + - NFS4: Fix state renewals missing after boot + - drm/amdkfd: fix suspend/resume all calls in mes based eviction path + - NFS4: Apply delay_retrans to async operations + - HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's + - HID: quirks: avoid Cooler Master MM712 dongle wakeup bug + - ixgbe: handle IXGBE_VF_GET_PF_LINK_STATE mailbox operation + - HID: nintendo: Wait longer for initial probe + - NFS: check if suid/sgid was cleared after a write as needed + - HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel + - io_uring: fix unexpected placement on same size resizing + - HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL + - ASoC: max98090/91: fixed max98091 ALSA widget powering up/down + - ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx + - ixgbe: handle IXGBE_VF_FEATURES_NEGOTIATE mbox cmd + - wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp() + - selftests: net: local_termination: Wait for interfaces to come up + - net: fec: correct rx_bytes statistic for the case SHIFT16 is set + - net: phy: micrel: Introduce lanphy_modify_page_reg + - net: phy: micrel: Replace hardcoded pages with defines + - net: phy: micrel: lan8814 fix reset of the QSGMII interface + - rust: Add -fno-isolate-erroneous-paths-dereference to + bindgen_skip_c_flags + - NFSD: Skip close replay processing if XDR encoding fails + - Bluetooth: 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion + - Bluetooth: 6lowpan: Don't hold spin lock over sleeping functions + - Bluetooth: hci_conn: Fix not cleaning up PA_LINK connections + - net: dsa: tag_brcm: do not mark link local traffic as offloaded + - net/smc: fix mismatch between CLC header and proposal + - net/handshake: Fix memory leak in tls_handshake_accept() + - net: ethernet: ti: am65-cpsw-qos: fix IET verify/response timeout + - net: ethernet: ti: am65-cpsw-qos: fix IET verify retry mechanism + - net: mdio: fix resource leak in mdiobus_register_device() + - wifi: mac80211: skip rate verification for not captured PSDUs + - Bluetooth: hci_event: Fix not handling PA Sync Lost event + - net/mlx5e: Fix missing error assignment in mlx5e_xfrm_add_state() + - net/mlx5e: Fix maxrate wraparound in threshold between units + - net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps + - net/mlx5e: Fix potentially misleading debug message + - net/mlx5: Fix typo of MLX5_EQ_DOORBEL_OFFSET + - net/mlx5: Store the global doorbell in mlx5_priv + - net/mlx5e: Prepare for using different CQ doorbells + - net_sched: limit try_bulk_dequeue_skb() batches + - wifi: iwlwifi: mvm: fix beacon template/fixed rate + - wifi: iwlwifi: mld: always take beacon ies in link grading + - virtio-net: fix incorrect flags recording in big mode + - hsr: Fix supervision frame sending on HSRv0 + - hsr: Follow standard for HSRv0 supervision frames + - ACPI: CPPC: Detect preferred core availability on online CPUs + - ACPI: CPPC: Check _CPC validity for only the online CPUs + - ACPI: CPPC: Perform fast check switch only for online CPUs + - ACPI: CPPC: Limit perf ctrs in PCC check only to online CPUs + - cpufreq: intel_pstate: Check IDA only before MSR_IA32_PERF_CTL writes + - Bluetooth: L2CAP: export l2cap_chan_hold for modules + - io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs + - acpi,srat: Fix incorrect device handle check for Generic Initiator + - regulator: fixed: fix GPIO descriptor leak on register failure + - ASoC: cs4271: Fix regulator leak on probe failure + - ASoC: codecs: va-macro: fix resource leak in probe error path + - drm/vmwgfx: Restore Guest-Backed only cursor plane support + - ASoC: tas2781: fix getting the wrong device number + - pnfs: Fix TLS logic in _nfs4_pnfs_v3_ds_connect() + - pnfs: Fix TLS logic in _nfs4_pnfs_v4_ds_connect() + - pnfs: Set transport security policy to RPC_XPRTSEC_NONE unless using TLS + - simplify nfs_atomic_open_v23() + - NFSv2/v3: Fix error handling in nfs_atomic_open_v23() + - NFS: sysfs: fix leak when nfs_client kobject add fails + - NFSv4: Fix an incorrect parameter when calling nfs4_call_sync() + - drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO + - acpi/hmat: Fix lockdep warning for hmem_register_resource() + - ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe() + - drm/client: fix MODULE_PARM_DESC string for "active" + - irqchip/riscv-intc: Add missing free() callback in riscv_intc_domain_ops + - lib/crypto: arm/curve25519: Disable on CPU_BIG_ENDIAN + - hostfs: Fix only passing host root in boot stage with new mount + - afs: Fix dynamic lookup to fail on cell lookup failure + - mtd: onenand: Pass correct pointer to IRQ handler + - virtio-fs: fix incorrect check for fsvq->kobj + - fs/namespace: correctly handle errors returned by grab_requested_mnt_ns + - perf header: Write bpf_prog (infos|btfs)_cnt to data file + - perf build: Don't fail fast path feature detection when binutils-devel + is not available + - perf lock: Fix segfault due to missing kernel map + - perf test shell lock_contention: Extra debug diagnostics + - perf test: Fix lock contention test + - arm64: dts: rockchip: Set correct pinctrl for I2S1 8ch TX on odroid-m1 + - arm64: dts: rockchip: Fix PCIe power enable pin for BigTreeTech CB2 and + Pi2 + - arm64: dts: rockchip: Make RK3588 GPU OPP table naming less generic + - ARM: dts: imx6ull-engicam-microgea-rmm: fix report-rate-hz value + - ARM: dts: imx51-zii-rdu1: Fix audmux node names + - arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred + - arm64: dts: imx8mp-kontron: Fix USB OTG role switching + - HID: hid-ntrig: Prevent memory leak in ntrig_report_version() + - ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY + - arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2 + - arm64: dts: rockchip: drop reset from rk3576 i2c9 node + - pwm: adp5585: Correct mismatched pwm chip info + - HID: playstation: Fix memory leak in dualshock4_get_calibration_data() + - HID: uclogic: Fix potential memory leak in error path + - LoongArch: KVM: Restore guest PMU if it is enabled + - LoongArch: KVM: Add delay until timer interrupt injected + - LoongArch: KVM: Fix max supported vCPUs set with EIOINTC + - KVM: arm64: Make all 32bit ID registers fully writable + - KVM: SVM: Mark VMCB_LBR dirty when MSR_IA32_DEBUGCTLMSR is updated + - KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv() + - KVM: nSVM: Fix and simplify LBR virtualization handling with nested + - KVM: VMX: Fix check for valid GVA on an EPT violation + - nfsd: add missing FATTR4_WORD2_CLONE_BLKSIZE from supported attributes + - gcov: add support for GCC 15 + - kho: warn and exit when unpreserved page wasn't preserved + - strparser: Fix signed/unsigned mismatch bug + - dma-mapping: benchmark: Restore padding to ensure uABI remained + consistent + - maple_tree: fix tracepoint string pointers + - LoongArch: Consolidate early_ioremap()/ioremap_prot() + - LoongArch: Use correct accessor to read FWPC/MWPC + - LoongArch: Let {pte,pmd}_modify() record the status of _PAGE_DIRTY + - mm/damon/sysfs: change next_update_jiffies to a global variable + - selftests/tracing: Run sample events to clear page cache events + - wifi: mac80211: reject address change while connecting + - mm/huge_memory: preserve PG_has_hwpoisoned if a folio is split to >0 + order + - mm/mm_init: fix hash table order logging in alloc_large_system_hash() + - mm/damon/stat: change last_refresh_jiffies to a global variable + - mm/kmsan: fix kmsan kmalloc hook when no stack depots are allocated yet + - mm/shmem: fix THP allocation and fallback loop + - mm/mremap: honour writable bit in mremap pte batching + - mm/huge_memory: fix folio split check for anon folios in swapcache + - mmc: sdhci-of-dwcmshc: Change DLL_STRBIN_TAPNUM_DEFAULT to 0x4 + - mmc: pxamci: Simplify pxamci_probe() error handling using devm APIs + - mmc: dw_mmc-rockchip: Fix wrong internal phase calculate + - ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present() + - crypto: hisilicon/qm - Fix device reference leak in qm_get_qos_value + - smb: client: fix cifs_pick_channel when channel needs reconnect + - spi: Try to get ACPI GPIO IRQ earlier + - x86/microcode/AMD: Add Zen5 model 0x44, stepping 0x1 minrev + - x86/CPU/AMD: Add additional fixed RDSEED microcode revisions + - selftests/user_events: fix type cast for write_index packed member in + perf_test + - gendwarfksyms: Skip files with no exports + - ftrace: Fix BPF fexit with livepatch + - LoongArch: Consolidate max_pfn & max_low_pfn calculation + - LoongArch: Use physical addresses for CSR_MERRENTRY/CSR_TLBRENTRY + - EDAC/altera: Handle OCRAM ECC enable after warm reset + - EDAC/altera: Use INTTEST register for Ethernet and USB SBE injection + - PM: hibernate: Emit an error when image writing fails + - PM: hibernate: Use atomic64_t for compressed_size variable + - btrfs: zoned: fix conventional zone capacity calculation + - btrfs: zoned: fix stripe width calculation + - btrfs: scrub: put bio after errors in scrub_raid56_parity_stripe() + - btrfs: do not update last_log_commit when logging inode due to a new + name + - btrfs: release root after error in data_reloc_print_warning_inode() + - drm/amdkfd: relax checks for over allocation of save area + - drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM + surfaces + - drm/i915/psr: fix pipe to vblank conversion + - drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg + - drm/xe/xe3: Extend wa_14023061436 + - drm/xe/xe3: Add WA_14024681466 for Xe3_LPG + - pmdomain: imx: Fix reference count leak in imx_gpc_remove + - pmdomain: samsung: plug potential memleak during probe + - pmdomain: samsung: Rework legacy splash-screen handover workaround + - selftests: mptcp: connect: fix fallback note due to OoO + - selftests: mptcp: join: rm: set backup flag + - selftests: mptcp: join: endpoints: longer transfer + - selftests: mptcp: connect: trunc: read all recv data + - selftests: mptcp: join: userspace: longer transfer + - selftests: mptcp: join: properly kill background tasks + - mm/huge_memory: do not change split_huge_page*() target order silently + - mm/memory: do not populate page table entries beyond i_size + - scripts/decode_stacktrace.sh: symbol: avoid trailing whitespaces + - scripts/decode_stacktrace.sh: symbol: preserve alignment + - scripts/decode_stacktrace.sh: fix build ID and PC source parsing + - ASoC: da7213: Convert to DEFINE_RUNTIME_DEV_PM_OPS() + - ASoC: da7213: Use component driver suspend/resume + - KVM: x86: Rename local "ecx" variables to "msr" and "pmc" as appropriate + - KVM: x86: Add support for RDMSR/WRMSRNS w/ immediate on Intel + - KVM: VMX: Inject #UD if guest tries to execute SEAMCALL or TDCALL + - isdn: mISDN: hfcsusb: fix memory leak in hfcsusb_probe() + - net: phy: micrel: Fix lan8814_config_init + - Linux 6.17.9 + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68204 + - pmdomain: arm: scmi: Fix genpd leak on provider registration failure + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68203 + - drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40267 + - io_uring/rw: ensure allocated iovec gets cleared for early failure + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68198 + - crash: fix crashkernel resource shrink + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68199 + - codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for + slabobj_ext + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40268 + - cifs: client: fix memory leak in smb3_fs_context_parse_param + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40269 + - ALSA: usb-audio: Fix potential overflow of PCM transfer buffer + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68205 + - ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40270 + - mm, swap: fix potential UAF issue for VMA readahead + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40271 + - fs/proc: fix uaf in proc_readdir_de() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40272 + - mm/secretmem: fix use-after-free race in fault handler + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68245 + - net: netpoll: fix incorrect refcount handling causing incorrect cleanup + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68240 + - nilfs2: avoid having an active sc_timer before freeing sci + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68241 + - ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68211 + - ksm: use range-walk function to jump over holes in + scan_get_next_rmap_item + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68246 + - ksmbd: close accepted socket when per-IP limit rejects connection + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40273 + - NFSD: free copynotify stateid in nfs4_free_ol_stateid() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40212 + - nfsd: fix refcount leak in nfsd_set_fh_dentry() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40274 + - KVM: guest_memfd: Remove bindings on memslot deletion when gmem is dying + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68202 + - sched_ext: Fix unsafe locking in the scx_dump_state() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68239 + - binfmt_misc: restore write access before closing files opened by + open_exec() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68247 + - posix-timers: Plug potential memory leak in do_timer_create() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68208 + - bpf: account for current allocated stack depth in + widen_imprecise_scalars() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68200 + - bpf: Add bpf_prog_run_data_pointers() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40275 + - ALSA: usb-audio: Fix NULL pointer dereference in + snd_usb_mixer_controls_badd + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68242 + - NFS: Fix LTP test failures when timestamps are delegated + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68243 + - NFS: Check the TLS certificate fields in nfs_match_client() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40276 + - drm/panthor: Flush shmem writes before mapping buffers CPU-uncached + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40277 + - drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68206 + - netfilter: nft_ct: add seqadj extension for natted connections + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68209 + - mlx5: Fix default values in create CQ + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40278 + - net: sched: act_ife: initialize struct tc_ife to fix KMSAN kernel- + infoleak + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40279 + - net: sched: act_connmark: initialize struct tc_ife to fix kernel leak + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40280 + - tipc: Fix use-after-free in tipc_mon_reinit_self(). + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40281 + - sctp: prevent possible shift-out-of-bounds in sctp_transport_update_rto + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40282 + - Bluetooth: 6lowpan: reset link-local header on ipv6 recv path + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40283 + - Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAF + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40284 + - Bluetooth: MGMT: cancel mesh send timer when hdev removed + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68210 + - erofs: avoid infinite loop due to incomplete zstd-compressed data + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40285 + - smb/server: fix possible refcount leak in smb2_sess_setup() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40286 + - smb/server: fix possible memory leak in smb2_read() + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40287 + - exfat: fix improper check of dentry.stream.valid_size + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40288 + - drm/amdgpu: Fix NULL pointer dereference in VRAM logic for APU devices + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-40289 + - drm/amdgpu: hide VRAM sysfs attributes on GPUs without VRAM + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68201 + - drm/amdgpu: remove two invalid BUG_ON()s + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68207 + - drm/xe/guc: Synchronize Dead CT worker with unbind + + * Questing update: v6.17.8 upstream stable release (LP: #2136850) // + CVE-2025-68244 + - drm/i915: Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) + - Revert "Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()" + - sched_ext: Mark scx_bpf_dsq_move_set_[slice|vtime]() with KF_RCU + - net: usb: asix_devices: Check return value of usbnet_get_endpoints + - fbdev: atyfb: Check if pll_ops->init_pll failed + - ACPI: button: Call input_free_device() on failing input device + registration + - ACPI: fan: Use platform device for devres-related actions + - virtio-net: drop the multi-buffer XDP packet in zerocopy + - batman-adv: Release references to inactive interfaces + - Bluetooth: rfcomm: fix modem control handling + - net: phy: dp83867: Disable EEE support as not implemented + - fbdev: pvr2fb: Fix leftover reference to ONCHIP_NR_DMA_CHANNELS + - fbdev: valkyriefb: Fix reference count leak in valkyriefb_init + - mptcp: drop bogus optimization in __mptcp_check_push() + - mptcp: restore window probe + - ASoC: qdsp6: q6asm: do not sleep while atomic + - ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume + - s390/pci: Restore IRQ unconditionally for the zPCI device + - x86/build: Disable SSE4a + - wifi: ath10k: Fix memory leak on unsupported WMI command + - wifi: ath11k: Add missing platform IDs for quirk table + - wifi: ath12k: free skb during idr cleanup callback + - wifi: ath11k: avoid bit operation on key flags + - drm/msm/a6xx: Fix GMU firmware parser + - ALSA: usb-audio: fix control pipe direction + - ASoC: cs-amp-lib-test: Fix missing include of kunit/test-bug.h + - wifi: mac80211: reset FILS discovery and unsol probe resp intervals + - wifi: mac80211: fix key tailroom accounting leak + - wifi: nl80211: call kfree without a NULL check + - kunit: test_dev_action: Correctly cast 'priv' pointer to long* + - scsi: ufs: core: Initialize value of an attribute returned by uic cmd + - scsi: core: Fix the unit attention counter implementation + - bpf: Do not audit capability check in do_jit() + - nvmet-auth: update sc_c in host response + - crypto: s390/phmac - Do not modify the req->nbytes value + - ASoC: Intel: avs: Unprepare a stream when XRUN occurs + - ASoC: fsl_sai: fix bit order for DSD format + - ASoC: fsl_micfil: correct the endian format for DSD + - libbpf: Fix powerpc's stack register definition in bpf_tracing.h + - ASoC: mediatek: Fix double pm_runtime_disable in remove functions + - Bluetooth: ISO: Fix BIS connection dst_type handling + - Bluetooth: btmtksdio: Add pmctrl handling for BT closed state during + reset + - Bluetooth: HCI: Fix tracking of advertisement set/instance 0x00 + - Bluetooth: ISO: Fix another instance of dst_type handling + - Bluetooth: btintel_pcie: Fix event packet loss issue + - Bluetooth: hci_conn: Fix connection cleanup with BIG with 2 or more BIS + - Bluetooth: hci_core: Fix tracking of periodic advertisement + - bpf: Conditionally include dynptr copy kfuncs + - drm/msm: Ensure vm is created in VM_BIND ioctl + - ALSA: usb-audio: add mono main switch to Presonus S1824c + - ALSA: usb-audio: don't log messages meant for 1810c when initializing + 1824c + - ACPI: MRRM: Check revision of MRRM table + - drm/etnaviv: fix flush sequence logic + - tools: ynl: fix string attribute length to include null terminator + - net: hns3: return error code when function fails + - sfc: fix potential memory leak in efx_mae_process_mport() + - tools: ynl: avoid print_field when there is no reply + - dpll: spec: add missing module-name and clock-id to pin-get reply + - ASoC: fsl_sai: Fix sync error in consumer mode + - ASoC: soc_sdw_utils: remove cs42l43 component_name + - drm/amd/pm: fix smu table id bound check issue in smu_cmn_update_table() + - drm/amd/pm/powerplay/smumgr: Fix PCIeBootLinkLevel value on Fiji + - drm/amd/pm/powerplay/smumgr: Fix PCIeBootLinkLevel value on Iceland + - drm/amdgpu: fix SPDX headers on amdgpu_cper.c/h + - drm/amdgpu: fix SPDX header on amd_cper.h + - drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.h + - ACPI: fan: Use ACPI handle when retrieving _FST + - block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL + - block: make REQ_OP_ZONE_OPEN a write operation + - dma-fence: Fix safe access wrapper to call timeline name method + - kbuild: align modinfo section for Secureboot Authenticode EDK2 compat + - regmap: irq: Correct documentation of wake_invert flag + - [Config] Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP for s390x + - s390/mm: Fix memory leak in add_marker() when kvrealloc() fails + - drm/xe: Do not wake device during a GT reset + - drm/sched: avoid killing parent entity on child SIGKILL + - drm/sched: Fix race in drm_sched_entity_select_rq() + - drm/nouveau: Fix race in nouveau_sched_fini() + - drm/i915/dmc: Clear HRR EVT_CTL/HTP to zero on ADL-S + - drm/ast: Clear preserved bits from register output value + - drm/amd: Check that VPE has reached DPM0 in idle handler + - drm/amd/display: Fix incorrect return of vblank enable on unconfigured + crtc + - drm/amd/display: Don't program BLNDGAM_MEM_PWR_FORCE when CM low-power + is disabled on DCN30 + - drm/amd/display: Add HDR workaround for a specific eDP + - mptcp: leverage skb deferral free + - mptcp: fix MSG_PEEK stream corruption + - cpuidle: governors: menu: Rearrange main loop in menu_select() + - cpuidle: governors: menu: Select polling state in some more cases + - PM: hibernate: Combine return paths in power_down() + - PM: sleep: Allow pm_restrict_gfp_mask() stacking + - mfd: kempld: Switch back to earlier ->init() behavior + - soc: aspeed: socinfo: Add AST27xx silicon IDs + - firmware: qcom: scm: preserve assign_mem() error return value + - soc: qcom: smem: Fix endian-unaware access of num_entries + - spi: loopback-test: Don't use %pK through printk + - spi: spi-qpic-snand: handle 'use_ecc' parameter of + qcom_spi_config_cw_read() + - soc: ti: pruss: don't use %pK through printk + - bpf: Don't use %pK through printk + - mmc: sdhci: Disable SD card clock before changing parameters + - pinctrl: single: fix bias pull up/down handling in pin_config_set + - mmc: host: renesas_sdhi: Fix the actual clock + - memstick: Add timeout to prevent indefinite waiting + - cpufreq: ti: Add support for AM62D2 + - bpf: Use tnums for JEQ/JNE is_branch_taken logic + - firmware: ti_sci: Enable abort handling of entry to LPM + - firewire: ohci: move self_id_complete tracepoint after validating + register + - irqchip/sifive-plic: Respect mask state when setting affinity + - irqchip/loongson-eiointc: Route interrupt parsed from bios table + - ACPI: sysfs: Use ACPI_FREE() for freeing an ACPI object + - ACPI: video: force native for Lenovo 82K8 + - libbpf: Fix USDT SIB argument handling causing unrecognized register + error + - selftests/bpf: Fix bpf_prog_detach2 usage in test_lirc_mode2 + - arm64: versal-net: Update rtc calibration value + - Revert "UBUNTU: SAUCE: firmware: qcom: scm: Allow QSEECOM on Dell + Inspiron 7441 / Latitude 7455" + - firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude 7455 + - kselftest/arm64: tpidr2: Switch to waitpid() over wait4() + - arc: Fix __fls() const-foldability via __builtin_clzl() + - selftests/bpf: Upon failures, exit with code 1 in test_xsk.sh + - irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment + - ACPI: PRM: Skip handlers with NULL handler_address or NULL VA + - ACPI: resource: Skip IRQ override on ASUS Vivobook Pro N6506CU + - ACPI: scan: Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] + - thermal: gov_step_wise: Allow cooling level to be reduced earlier + - thermal: intel: selftests: workload_hint: Mask unsupported types + - power: supply: qcom_battmgr: add OOI chemistry + - hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models + - hwmon: (k10temp) Add device ID for Strix Halo + - hwmon: (lenovo-ec-sensors) Update P8 supprt + - hwmon: (sbtsi_temp) AMD CPU extended temperature range support + - pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control + registers + - pinctrl: keembay: release allocated memory in detach path + - power: supply: sbs-charger: Support multiple devices + - io_uring/rsrc: respect submitter_task in io_register_clone_buffers() + - hwmon: sy7636a: add alias + - selftests/bpf: Fix incorrect array size calculation + - block: check for valid bio while splitting + - irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller + - cpufreq: ondemand: Update the efficient idle check for Intel extended + Families + - arm64: zynqmp: Disable coresight by default + - arm64: zynqmp: Revert usb node drive strength and slew rate for zcu106 + - soc/tegra: fuse: Add Tegra114 nvmem cells and fuse lookups + - ARM: tegra: p880: set correct touchscreen clipping + - ARM: tegra: transformer-20: add missing magnetometer interrupt + - ARM: tegra: transformer-20: fix audio-codec interrupt + - firmware: qcom: tzmem: disable sc7180 platform + - soc: ti: k3-socinfo: Add information for AM62L SR1.1 + - mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card + - pwm: pca9685: Use bulk write to atomicially update registers + - ACPICA: dispatcher: Use acpi_ds_clear_operands() in + acpi_ds_call_control_method() + - tee: allow a driver to allocate a tee_device without a pool + - kunit: Enable PCI on UML without triggering WARN() + - selftests/bpf: Fix arena_spin_lock selftest failure + - bpf: Do not limit bpf_cgroup_from_id to current's namespace + - i3c: mipi-i3c-hci-pci: Add support for Intel Wildcat Lake-U I3C + - rust: kunit: allow `cfg` on `test`s + - video: backlight: lp855x_bl: Set correct EPROM start for LP8556 + - i3c: dw: Add shutdown support to dw_i3c_master driver + - io_uring/zcrx: check all niovs filled with dma addresses + - tools/cpupower: fix error return value in cpupower_write_sysfs() + - io_uring/zcrx: account niov arrays to cgroup + - pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" + - power: supply: qcom_battmgr: handle charging state change notifications + - bpftool: Fix -Wuninitialized-const-pointer warnings with clang >= 21 + - cpuidle: Fail cpuidle device registration if there is one already + - selftests/bpf: Fix selftest verifier_arena_large failure + - selftests: ublk: fix behavior when fio is not installed + - spi: rpc-if: Add resume support for RZ/G3E + - ACPI: SPCR: Support Precise Baud Rate field + - clocksource/drivers/vf-pit: Replace raw_readl/writel to readl/writel + - clocksource/drivers/timer-rtl-otto: Work around dying timers + - clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts + - riscv: bpf: Fix uninitialized symbol 'retval_off' + - bpf: Clear pfmemalloc flag when freeing all fragments + - selftests: drv-net: Pull data before parsing headers + - nvme: Use non zero KATO for persistent discovery connections + - uprobe: Do not emulate/sstep original instruction when ip is changed + - hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex + - hwmon: (dell-smm) Remove Dell Precision 490 custom config data + - hwmon: (dell-smm) Add support for Dell OptiPlex 7040 + - tools/cpupower: Fix incorrect size in cpuidle_state_disable() + - selftests/bpf: Fix flaky bpf_cookie selftest + - tools/power turbostat: Fix incorrect sorting of PMT telemetry + - tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage + - tools/power x86_energy_perf_policy: Enhance HWP enable + - tools/power x86_energy_perf_policy: Prefer driver HWP limits + - mfd: simple-mfd-i2c: Add compatible strings for Layerscape QIXIS FPGA + - mfd: stmpe: Remove IRQ domain upon removal + - mfd: stmpe-i2c: Add missing MODULE_LICENSE + - mfd: qnap-mcu: Handle errors returned from qnap_mcu_write + - mfd: qnap-mcu: Include linux/types.h in qnap-mcu.h shared header + - mfd: madera: Work around false-positive -Wininitialized warning + - mfd: da9063: Split chip variant reading in two bus transactions + - mfd: macsmc: Add "apple,t8103-smc" compatible + - mfd: core: Increment of_node's refcount before linking it to the + platform device + - mfd: cs42l43: Move IRQ enable/disable to encompass force suspend + - mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs + - drm/xe/ptl: Apply Wa_16026007364 + - drm/xe/configfs: Enforce canonical device names + - drm/amd/display: Update tiled to tiled copy command + - drm/amd/display: fix condition for setting timing_adjust_pending + - drm/amd/display: ensure committing streams is seamless + - drm/amdgpu: add range check for RAS bad page address + - drm/amdgpu: Check vcn sram load return value + - drm/amd/display: Remove check DPIA HPD status for BW Allocation + - drm/amd/display: Increase AUX Intra-Hop Done Max Wait Duration + - drm/amd/display: Fix dmub_cmd header alignment + - drm/xe/guc: Add more GuC load error status codes + - drm/xe/pf: Don't resume device from restart worker + - drm/amdgpu: Fix build error when CONFIG_SUSPEND is disabled + - drm/amdgpu: Update IPID value for bad page threshold CPER + - drm/amdgpu: Avoid rma causes GPU duplicate reset + - drm/amdgpu: Effective health check before reset + - drm/amd/amdgpu: Release xcp drm memory after unplug + - drm/amdgpu: Fix vcn v5.0.1 poison irq call trace + - drm/xe: Extend wa_13012615864 to additional Xe2 and Xe3 platforms + - drm/amdgpu: Skip poison aca bank from UE channel + - drm/amd/display: add more cyan skillfish devices + - drm/amdgpu: Initialize jpeg v5_0_1 ras function + - drm/amdgpu: skip mgpu fan boost for multi-vf + - drm/amd/display: fix dmub access race condition + - drm/amd/display: update dpp/disp clock from smu clock table + - drm/amd/pm: Use cached metrics data on aldebaran + - drm/amd/pm: Use cached metrics data on arcturus + - accel/amdxdna: Unify pm and rpm suspend and resume callbacks + - drm/amdgpu/jpeg: Hold pg_lock before jpeg poweroff + - drm/xe/pf: Program LMTT directory pointer on all GTs within a tile + - drm/nouveau: replace snprintf() with scnprintf() in nvkm_snprintbf() + - ASoC: tas2781: Add keyword "init" in profile section + - ASoC: mediatek: Use SND_JACK_AVOUT for HDMI/DP jacks + - drm/amd/display: Reset apply_eamless_boot_optimization when dpms_off + - drm/amdgpu: add to custom amdgpu_drm_release drm_dev_enter/exit + - drm/amd/display: Wait until OTG enable state is cleared + - drm/xe: rework PDE PAT index selection + - docs: kernel-doc: avoid script crash on ancient Python + - drm/sharp-memory: Do not access GEM-DMA vaddr directly + - PCI: Disable MSI on RDC PCI to PCIe bridges + - drm/nouveau: always set RMDevidCheckIgnore for GSP-RM + - drm/panel-edp: Add SHP LQ134Z1 panel for Dell XPS 9345 + - selftests/net: Replace non-standard __WORDSIZE with sizeof(long) * 8 + - selftests/net: Ensure assert() triggers in psock_tpacket.c + - wifi: rtw89: print just once for unknown C2H events + - wifi: rtw88: sdio: use indirect IO for device registers before power-on + - wifi: rtw89: add dummy C2H handlers for BCN resend and update done + - drm/amdkfd: return -ENOTTY for unsupported IOCTLs + - selftests: drv-net: devmem: add / correct the IPv6 support + - selftests: drv-net: devmem: flip the direction of Tx tests + - media: pci: ivtv: Don't create fake v4l2_fh + - media: amphion: Delete v4l2_fh synchronously in .release() + - drm/tidss: Use the crtc_* timings when programming the HW + - drm/bridge: cdns-dsi: Fix REG_WAKEUP_TIME value + - drm/bridge: cdns-dsi: Don't fail on MIPI_DSI_MODE_VIDEO_BURST + - drm/tidss: Set crtc modesetting parameters with adjusted mode + - drm/tidss: Remove early fb + - RDMA/mana_ib: Drain send wrs of GSI QP + - media: i2c: Kconfig: Ensure a dependency on HAVE_CLK for + VIDEO_CAMERA_SENSOR + - PCI/ERR: Update device error_state already after reset + - x86/vsyscall: Do not require X86_PF_INSTR to emulate vsyscall + - net: stmmac: Check stmmac_hw_setup() in stmmac_resume() + - ice: Don't use %pK through printk or tracepoints + - thunderbolt: Use is_pciehp instead of is_hotplug_bridge + - ASoC: es8323: enable DAPM power widgets for playback DAC and output + - powerpc/eeh: Use result of error_detected() in uevent + - s390/pci: Use pci_uevent_ers() in PCI recovery + - bridge: Redirect to backup port when port is administratively down + - selftests: drv-net: wait for carrier + - net: phy: mscc: report and configure in-band auto-negotiation for + SGMII/QSGMII + - scsi: ufs: host: mediatek: Fix auto-hibern8 timer configuration + - scsi: ufs: host: mediatek: Fix PWM mode switch issue + - scsi: ufs: host: mediatek: Assign power mode userdata before FASTAUTO + mode change + - scsi: ufs: host: mediatek: Change reset sequence for improved stability + - scsi: ufs: host: mediatek: Fix invalid access in vccqx handling + - gpu: nova-core: register: allow fields named `offset` + - drm/panthor: Serialize GPU cache flush operations + - HID: pidff: Use direction fix only for conditional effects + - HID: pidff: PERMISSIVE_CONTROL quirk autodetection + - drm/bridge: display-connector: don't set OP_DETECT for DisplayPorts + - drm/amdkfd: Handle lack of READ permissions in SVM mapping + - drm/amdgpu: refactor bad_page_work for corner case handling + - hwrng: timeriomem - Use us_to_ktime() where appropriate + - iio: adc: spear_adc: mask SPEAR_ADC_STATUS channel and avg sample before + setting register + - iio: adc: imx93_adc: load calibrated values even calibration failed + - usb: gadget: f_ncm: Fix MAC assignment NCM ethernet + - ASoC: es8323: remove DAC enablement write from es8323_probe + - ASoC: es8323: add proper left/right mixer controls via DAPM + - ASoC: codecs: wsa883x: Handle shared reset GPIO for WSA883x speakers + - drm/xe: Make page size consistent in loop + - wifi: rtw89: wow: remove notify during WoWLAN net-detect + - wifi: rtw89: fix BSSID comparison for non-transmitted BSSID + - wifi: rtw89: 8851b: rfk: update IQK TIA setting + - dm error: mark as DM_TARGET_PASSES_INTEGRITY + - char: misc: Make misc_register() reentry for miscdevice who wants + dynamic minor + - char: misc: Does not request module for miscdevice with dynamic minor + - net: When removing nexthops, don't call synchronize_net if it is not + necessary + - net: Call trace_sock_exceed_buf_limit() for memcg failure with + SK_MEM_RECV. + - dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family + platforms + - PCI/P2PDMA: Fix incorrect pointer usage in devm_kfree() call + - bnxt_en: Add Hyper-V VF ID + - tty: serial: Modify the use of dev_err_probe() + - ALSA: usb-audio: Add validation of UAC2/UAC3 effect units + - Octeontx2-af: Broadcast XON on all channels + - idpf: do not linearize big TSO packets + - drm/xe/pcode: Initialize data0 for pcode read routine + - drm/panel: ilitek-ili9881c: turn off power-supply when init fails + - drm/panel: ilitek-ili9881c: move display_on/_off dcs calls to + (un-)prepare + - rds: Fix endianness annotation for RDS_MPATH_HASH + - net: wangxun: limit tx_max_coalesced_frames_irq + - iio: imu: bmi270: Match PNP ID found on newer GPD firmware + - media: ipu6: isys: Set embedded data type correctly for metadata formats + - rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table + - net: ipv4: allow directed broadcast routes to use dst hint + - scsi: mpi3mr: Fix device loss during enclosure reboot due to zero link + speed + - wifi: rtw89: coex: Limit Wi-Fi scan slot cost to avoid A2DP glitch + - scsi: mpi3mr: Fix I/O failures during controller reset + - scsi: mpi3mr: Fix controller init failure on fault during queue creation + - scsi: pm80xx: Fix race condition caused by static variables + - extcon: adc-jack: Fix wakeup source leaks on device unbind + - extcon: fsa9480: Fix wakeup source leaks on device unbind + - extcon: axp288: Fix wakeup source leaks on device unbind + - drm/xe: Set GT as wedged before sending wedged uevent + - remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper + - drm/xe/wcl: Extend L3bank mask workaround + - net: phy: fixed_phy: let fixed_phy_unregister free the phy_device + - selftests: drv-net: hds: restore hds settings + - fuse: zero initialize inode private data + - virtio_fs: fix the hash table using in virtio_fs_enqueue_req() + - selftests: pci_endpoint: Skip IRQ test if IRQ is out of range. + - drm/xe: Ensure GT is in C0 during resumes + - misc: pci_endpoint_test: Skip IRQ tests if irq is out of range + - drm/amdgpu: Correct the loss of aca bank reg info + - drm/amdgpu: Correct the counts of nr_banks and nr_errors + - drm/amdkfd: fix vram allocation failure for a special case + - drm/amd/display: Support HW cursor 180 rot for any number of pipe splits + - drm/amdkfd: Tie UNMAP_LATENCY to queue_preemption + - drm/amd/display: wait for otg update pending latch before clock + optimization + - drm/amd/display: Consider sink max slice width limitation for dsc + - drm/amdgpu/vpe: cancel delayed work in hw_fini + - drm/xe: Cancel pending TLB inval workers on teardown + - net: Prevent RPS table overwrite of active flows + - eth: fbnic: Reset hw stats upon PCI error + - wifi: iwlwifi: mld: trigger mlo scan only when not in EMLSR + - platform/x86/intel-uncore-freq: Fix warning in partitioned system + - drm/msm/dpu: Filter modes based on adjusted mode clock + - drm/msm: Use of_reserved_mem_region_to_resource() for "memory-region" + - selftests: drv-net: rss_ctx: fix the queue count check + - media: fix uninitialized symbol warnings + - media: pci: mgb4: Fix timings comparison in VIDIOC_S_DV_TIMINGS + - ASoC: SOF: ipc4-pcm: Add fixup for channels + - drm/amdgpu: Notify pmfw bad page threshold exceeded + - drm/amd/display: Increase minimum clock for TMDS 420 with pipe splitting + - drm/amdgpu: Avoid jpeg v5.0.1 poison irq call trace on sriov guest + - drm/amd/display: incorrect conditions for failing dto calculations + - drm/amdgpu: Avoid vcn v5.0.1 poison irq call trace on sriov guest + - drm/amdgpu: Respect max pixel clock for HDMI and DVI-D (v2) + - mips: lantiq: danube: add missing properties to cpu node + - mips: lantiq: danube: add model to EASY50712 dts + - mips: lantiq: danube: add missing device_type in pci node + - mips: lantiq: xway: sysctrl: rename stp clock + - mips: lantiq: danube: rename stp node on EASY50712 reference board + - inet_diag: annotate data-races in inet_diag_bc_sk() + - microchip: lan865x: add ndo_eth_ioctl handler to enable PHY ioctl + support + - crypto: qat - use kcalloc() in qat_uclo_map_objs_from_mof() + - scsi: pm8001: Use int instead of u32 to store error codes + - iio: adc: ad7124: do not require mclk + - scsi: ufs: exynos: fsd: Gate ref_clk and put UFS device in reset on + suspend + - media: imx-mipi-csis: Only set clock rate when specified in DT + - wifi: iwlwifi: pcie: remember when interrupts are disabled + - drm/st7571-i2c: add support for inverted pixel format + - ptp: Limit time setting of PTP clocks + - dmaengine: sh: setup_xref error handling + - dmaengine: mv_xor: match alloc_wc and free_wc + - dmaengine: dw-edma: Set status for callback_result + - netfilter: nf_tables: all transaction allocations can now sleep + - drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL + - drm/msm/dsi/phy_7nm: Fix missing initial VCO rate + - drm/amdgpu: Allow kfd CRIU with no buffer objects + - drm/xe/guc: Increase GuC crash dump buffer size + - drm/amd/pm: Increase SMC timeout on SI and warn (v3) + - move_mount(2): take sanity checks in 'beneath' case into do_lock_mount() + - selftests: drv-net: rss_ctx: make the test pass with few queues + - ipv6: Add sanity checks on ipv6_devconf.rpl_seg_enabled + - drm/xe: Extend Wa_22021007897 to Xe3 platforms + - wifi: mac80211: count reg connection element in the size + - drm/panthor: check bo offset alignment in vm bind + - drm: panel-backlight-quirks: Make EDID match optional + - ixgbe: reduce number of reads when getting OROM data + - netlink: specs: fou: change local-v6/peer-v6 check + - net: nfc: nci: Increase NCI_DATA_TIMEOUT to 3000 ms + - media: adv7180: Add missing lock in suspend callback + - media: adv7180: Do not write format to device in set_fmt + - media: adv7180: Only validate format in querystd + - media: verisilicon: Explicitly disable selection api ioctls for decoders + - wifi: mac80211: Fix 6 GHz Band capabilities element advertisement in + lower bands + - platform/x86: think-lmi: Add extra TC BIOS error messages + - platform/x86/intel-uncore-freq: Present unique domain ID per package + - ALSA: usb-audio: apply quirk for MOONDROP Quark2 + - PCI: imx6: Enable the Vaux supply if available + - drm/xe/guc: Set upper limit of H2G retries over CTB + - net: call cond_resched() less often in __release_sock() + - smsc911x: add second read of EEPROM mac when possible corruption seen + - drm/xe: improve dma-resv handling for backup object + - iommu/amd: Add support to remap/unmap IOMMU buffers for kdump + - iommu/amd: Skip enabling command/event buffers for kdump + - iommu/amd: Reuse device table for kdump + - crypto: ccp: Skip SEV and SNP INIT for kdump boot + - iommu/apple-dart: Clear stream error indicator bits for T8110 DARTs + - bus: mhi: host: pci_generic: Add support for all Foxconn T99W696 SKU + variants + - drm/amdgpu: Correct info field of bad page threshold exceed CPER + - drm/amd: add more cyan skillfish PCI ids + - drm/amdgpu: don't enable SMU on cyan skillfish + - drm/amdgpu: add support for cyan skillfish gpu_info + - drm/amd/display: Fix pbn_div Calculation Error + - drm/amd/display: dont wait for pipe update during medupdate/highirq + - drm/amd/pm: refine amdgpu pm sysfs node error code + - drm/amd/display: Indicate when custom brightness curves are in use + - selftests: ncdevmem: don't retry EFAULT + - net: dsa: felix: support phy-mode = "10g-qxgmii" + - usb: gadget: f_hid: Fix zero length packet transfer + - serial: qcom-geni: Add DFS clock mode support to GENI UART driver + - serdev: Drop dev_pm_domain_detach() call + - tty/vt: Add missing return value for VT_RESIZE in vt_ioctl() + - eeprom: at25: support Cypress FRAMs without device ID + - drm/msm/adreno: Add speedbins for A663 GPU + - drm/msm: Fix 32b size truncation + - dt-bindings: display/msm/gmu: Update Adreno 623 bindings + - drm/msm: make sure to not queue up recovery more than once + - char: Use list_del_init() in misc_deregister() to reinitialize list + pointer + - drm/msm/adreno: Add speedbin data for A623 GPU + - drm/msm/adreno: Add fenced regwrite support + - drm/msm/a6xx: Switch to GMU AO counter + - idpf: link NAPIs to queues + - selftests: net: make the dump test less sensitive to mem accounting + - PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs + - wifi: rtw89: Add USB ID 2001:332a for D-Link AX9U rev. A1 + - wifi: rtw89: Add USB ID 2001:3327 for D-Link AX18U rev. A1 + - wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list + - drm/xe/i2c: Enable bus mastering + - media: ov08x40: Fix the horizontal flip control + - media: i2c: og01a1b: Specify monochrome media bus format instead of + Bayer + - media: qcom: camss: csiphy-3ph: Add CSIPHY 2ph DPHY v2.0.1 init sequence + - drm/bridge: write full Audio InfoFrame + - drm/xe/guc: Always add CT disable action during second init step + - f2fs: fix wrong layout information on 16KB page + - selftests: mptcp: join: allow more time to send ADD_ADDR + - scsi: ufs: host: mediatek: Enhance recovery on resume failure + - scsi: ufs: ufs-qcom: Align programming sequence of Shared ICE for UFS + controller v5 + - scsi: ufs: host: mediatek: Fix unbalanced IRQ enable issue + - scsi: ufs: host: mediatek: Enhance recovery on hibernation exit failure + - net: phy: marvell: Fix 88e1510 downshift counter errata + - scsi: ufs: host: mediatek: Correct system PM flow + - scsi: ufs: host: mediatek: Disable auto-hibern8 during power mode + changes + - scsi: ufs: host: mediatek: Fix adapt issue after PA_Init + - wifi: cfg80211: update the time stamps in hidden ssid + - wifi: mac80211: Fix HE capabilities element check + - fbcon: Use screen info to find primary device + - phy: cadence: cdns-dphy: Enable lower resolutions in dphy + - Fix access to video_is_primary_device() when compiled without + CONFIG_VIDEO + - phy: renesas: r8a779f0-ether-serdes: add new step added to latest + datasheet + - phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0 + - drm/msm/registers: Generate _HI/LO builders for reg64 + - net: sh_eth: Disable WoL if system can not suspend + - selftests: net: replace sleeps in fcnal-test with waits + - media: redrat3: use int type to store negative error codes + - platform/x86/amd/pmf: Fix the custom bios input handling mechanism + - selftests: traceroute: Use require_command() + - selftests: traceroute: Return correct value on failure + - openrisc: Add R_OR1K_32_PCREL relocation type module support + - netfilter: nf_reject: don't reply to icmp error messages + - x86/kvm: Prefer native qspinlock for dedicated vCPUs irrespective of + PV_UNHALT + - x86/virt/tdx: Use precalculated TDVPR page physical address + - selftests: Disable dad for ipv6 in fcnal-test.sh + - eth: 8139too: Make 8139TOO_PIO depend on !NO_IOPORT_MAP + - [Config] No longer enable `CONFIG_8139TOO_PIO` for armhf + - selftests: Replace sleep with slowwait + - net: devmem: expose tcp_recvmsg_locked errors + - selftests: net: lib.sh: Don't defer failed commands + - HID: asus: add Z13 folio to generic group for multitouch to work + - watchdog: s3c2410_wdt: Fix max_timeout being calculated larger + - crypto: sun8i-ce - remove channel timeout field + - PCI: dwc: Verify the single eDMA IRQ in dw_pcie_edma_irq_verify() + - crypto: ccp - Fix incorrect payload size calculation in + psp_poulate_hsti() + - crypto: caam - double the entropy delay interval for retry + - can: rcar_canfd: Update bit rate constants for RZ/G3E and R-Car Gen4 + - net: mana: Reduce waiting time if HWC not responding + - ionic: use int type for err in ionic_get_module_eeprom_by_page + - net/cls_cgroup: Fix task_get_classid() during qdisc run + - wifi: mt76: mt7921: Add 160MHz beamformee capability for mt7922 device + - wifi: mt76: mt7925: add pci restore for hibernate + - wifi: mt76: mt7996: Fix mt7996_reverse_frag0_hdr_trans for MLO + - wifi: mt76: mt7996: Set def_wcid pointer in mt7996_mac_sta_init_link() + - wifi: mt76: mt7996: Temporarily disable EPCS + - wifi: mt76: mt7996: support writing MAC TXD for AddBA Request + - wifi: mt76: mt76_eeprom_override to int + - ALSA: serial-generic: remove shared static buffer + - wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error + - wifi: mt76: mt7996: disable promiscuous mode by default + - wifi: mt76: use altx queue for offchannel tx on connac+ + - wifi: mt76: improve phy reset on hw restart + - drm/amdgpu: Use memdup_array_user in amdgpu_cs_wait_fences_ioctl + - drm/amdgpu: Release hive reference properly + - drm/amd/display: Fix DMCUB loading sequence for DCN3.2 + - drm/amd/display: Set up pixel encoding for YCBCR422 + - drm/amd/display: fix dml ms order of operations + - drm/amd/display: Don't use non-registered VUPDATE on DCE 6 + - drm/amd/display: Keep PLL0 running on DCE 6.0 and 6.4 + - drm/amd/display: Fix DVI-D/HDMI adapters + - drm/amd/display: Disable VRR on DCE 6 + - drm/amd/display/dml2: Guard dml21_map_dc_state_into_dml_display_cfg with + DC_FP_START + - net: phy: clear EEE runtime state in PHY_HALTED/PHY_ERROR + - ethernet: Extend device_get_mac_address() to use NVMEM + - scsi: ufs: ufs-qcom: Disable lane clocks during phy hibern8 + - HID: i2c-hid: Resolve touchpad issues on Dell systems during S4 + - hinic3: Queue pair endianness improvements + - hinic3: Fix missing napi->dev in netif_queue_set_napi + - tools: ynl-gen: validate nested arrays + - drm/xe/guc: Return an error code if the GuC load fails + - drm/amdgpu: reject gang submissions under SRIOV + - selftests/Makefile: include $(INSTALL_DEP_TARGETS) in clean target to + clean net/lib dependency + - scsi: ufs: core: Disable timestamp functionality if not supported + - scsi: lpfc: Clean up allocated queues when queue setup mbox commands + fail + - scsi: lpfc: Decrement ndlp kref after FDISC retries exhausted + - scsi: lpfc: Check return status of lpfc_reset_flush_io_context during + TGT_RESET + - scsi: lpfc: Remove ndlp kref decrement clause for F_Port_Ctrl in + lpfc_cleanup + - scsi: lpfc: Define size of debugfs entry for xri rebalancing + - scsi: lpfc: Ensure PLOGI_ACC is sent prior to PRLI in Point to Point + topology + - allow finish_no_open(file, ERR_PTR(-E...)) + - usb: mon: Increase BUFF_MAX to 64 MiB to support multi-MB URBs + - usb: xhci: plat: Facilitate using autosuspend for xhci plat devices + - wifi: rtw89: disable RTW89_PHYSTS_IE09_FTR_0 for ppdu status + - wifi: rtw89: obtain RX path from ppdu status IE00 + - wifi: rtw89: renew a completion for each H2C command waiting C2H event + - usb: xhci-pci: add support for hosts with zero USB3 ports + - ipv6: np->rxpmtu race annotation + - RDMA/irdma: Update Kconfig + - IB/ipoib: Ignore L3 master device + - bnxt_en: Add fw log trace support for 5731X/5741X chips + - mei: make a local copy of client uuid in connect + - ASoC: qcom: sc8280xp: explicitly set S16LE format in + sc8280xp_be_hw_params_fixup() + - net: phy: clear link parameters on admin link down + - net: ethernet: microchip: sparx5: make it selectable for ARCH_LAN969X + - bus: mhi: core: Improve mhi_sync_power_up handling for SYS_ERR state + - iommu/vt-d: Replace snprintf with scnprintf in dmar_latency_snapshot() + - wifi: ath10k: Fix connection after GTK rekeying + - iommu/vt-d: Remove LPIG from page group response descriptor + - wifi: mac80211: Get the correct interface for non-netdev skb status + - wifi: mac80211: Track NAN interface start/stop + - net: intel: fm10k: Fix parameter idx set but not used + - sparc/module: Add R_SPARC_UA64 relocation handling + - sparc64: fix prototypes of reads[bwl]() + - vfio: return -ENOTTY for unsupported device feature + - ptp_ocp: make ptp_ocp driver compatible with PTP_EXTTS_REQUEST2 + - crypto: hisilicon/qm - invalidate queues in use + - crypto: hisilicon/qm - clear all VF configurations in the hardware + - ASoC: ops: improve snd_soc_get_volsw + - PCI/PM: Skip resuming to D0 if device is disconnected + - selftests: forwarding: Reorder (ar)ping arguments to obey POSIX getopt + - remoteproc: qcom: q6v5: Avoid handling handover twice + - wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256 + - net: dsa: microchip: Set SPI as bus interface during reset for KSZ8463 + - bng_en: make bnge_alloc_ring() self-unwind on failure + - ALSA: usb-audio: don't apply interface quirk to Presonus S1824c + - tcp: Update bind bucket state on port release + - ovl: make sure that ovl_create_real() returns a hashed dentry + - drm/amd/display: Add missing post flip calls + - drm/amd/display: Add AVI infoframe copy in copy_stream_update_to_stream + - drm/amd/display: Add fast sync field in ultra sleep more for DMUB + - drm/amd/display: Init dispclk from bootup clock for DCN314 + - drm/amd/display: Fix for test crash due to power gating + - drm/amd/display: change dc stream color settings only in atomic commit + - NFSv4: handle ERR_GRACE on delegation recalls + - NFSv4.1: fix mount hang after CREATE_SESSION failure + - net: bridge: Install FDB for bridge MAC on VLAN 0 + - net: phy: dp83640: improve phydev and driver removal handling + - scsi: ufs: core: Change MCQ interrupt enable flow + - scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() + - accel/habanalabs/gaudi2: fix BMON disable configuration + - scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate + - accel/habanalabs: return ENOMEM if less than requested pages were pinned + - accel/habanalabs/gaudi2: read preboot status after recovering from dirty + state + - ASoC: renesas: msiof: add .symmetric_xxx on snd_soc_dai_driver + - ASoC: renesas: msiof: use reset controller + - ASoC: renesas: msiof: tidyup DMAC stop timing + - ASoC: renesas: msiof: set SIFCTR register + - ext4: increase IO priority of fastcommit + - drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails + - drm/amdgpu: Fix fence signaling race condition in userqueue + - ASoC: stm32: sai: manage context in set_sysclk callback + - ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007 + - ACPI: scan: Update honor list for RPMI System MSI + - platform/x86: x86-android-tablets: Stop using EPROBE_DEFER + - vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices + - vfio/nvgrace-gpu: Add GB300 SKU to the devid table + - selftest: net: Fix error message if empty variable + - net/mlx5e: Don't query FEC statistics when FEC is disabled + - Bluetooth: btintel: Add support for BlazarIW core + - net: macb: avoid dealing with endianness in macb_set_hwaddr() + - Bluetooth: btusb: Add new VID/PID 13d3/3627 for MT7925 + - Bluetooth: btintel_pcie: Define hdev->wakeup() callback + - Bluetooth: ISO: Don't initiate CIS connections if there are no buffers + - Bluetooth: btusb: Check for unexpected bytes when defragmenting HCI + frames + - Bluetooth: ISO: Use sk_sndtimeo as conn_timeout + - Bluetooth: btusb: Add new VID/PID 13d3/3633 for MT7922 + - net: stmmac: est: Drop frames causing HLBS error + - exfat: limit log print for IO error + - 6pack: drop redundant locking and refcounting + - page_pool: Clamp pool size to max 16K pages + - net/mlx5e: Prevent entering switchdev mode with inconsistent netns + - ksmbd: use sock_create_kern interface to create kernel socket + - smb: client: update cfid->last_access_time in + open_cached_dir_by_dentry() + - smb: client: transport: avoid reconnects triggered by pending task work + - usb: xhci-pci: Fix USB2-only root hub registration + - drm/amd/display: Add fallback path for YCBCR422 + - ACPICA: Update dsmethod.c to get rid of unused variable warning + - RDMA/bnxt_re: Fix a potential memory leak in destroy_gsi_sqp + - RDMA/irdma: Fix SD index calculation + - RDMA/irdma: Remove unused struct irdma_cq fields + - RDMA/irdma: Set irdma_cq cq_num field during CQ create + - RDMA/uverbs: Fix umem release in UVERBS_METHOD_CQ_CREATE + - RDMA/hns: Fix recv CQ and QP cache affinity + - RDMA/hns: Fix the modification of max_send_sge + - RDMA/hns: Fix wrong WQE data when QP wraps around + - btrfs: mark dirty extent range for out of bound prealloc extents + - clk: qcom: gcc-ipq6018: rework nss_port5 clock to multiple conf + - clk: renesas: rzv2h: Re-assert reset on deassert timeout + - clk: samsung: exynos990: Add missing USB clock registers to HSI0 + - fs/hpfs: Fix error code for new_inode() failure in + mkdir/create/mknod/symlink + - clocksource: hyper-v: Skip unnecessary checks for the root partition + - hyperv: Add missing field to hv_output_map_device_interrupt + - um: Fix help message for ssl-non-raw + - clk: sunxi-ng: sun6i-rtc: Add A523 specifics + - rtc: pcf2127: clear minute/second interrupt + - ARM: at91: pm: save and restore ACR during PLL disable/enable + - clk: at91: add ACR in all PLL settings + - clk: at91: sam9x7: Add peripheral clock id for pmecc + - clk: at91: clk-master: Add check for divide by 3 + - clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register + - clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled + - clk: scmi: Add duty cycle ops only when duty cycle is supported + - clk: clocking-wizard: Fix output clock register offset for Versal + platforms + - NTB: epf: Allow arbitrary BAR mapping + - 9p: fix /sys/fs/9p/caches overwriting itself + - cpufreq: tegra186: Initialize all cores to max frequencies + - 9p: sysfs_init: don't hardcode error to ENOMEM + - scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS + - fbdev: core: Fix ubsan warning in pixel_to_pat + - ACPI: property: Return present device nodes only on fwnode interface + - LoongArch: Handle new atomic instructions for probes + - tools bitmap: Add missing asm-generic/bitsperlong.h include + - tools: lib: thermal: don't preserve owner in install + - tools: lib: thermal: use pkg-config to locate libnl3 + - ALSA: hda/realtek: Add quirk for ASUS ROG Zephyrus Duo + - rtc: zynqmp: Restore alarm functionality after kexec transition + - rtc: pcf2127: fix watchdog interrupt mask on pcf2131 + - net: wwan: t7xx: add support for HP DRMR-H01 + - kbuild: uapi: Strip comments before size type check + - ASoC: meson: aiu-encoder-i2s: fix bit clock polarity + - ASoC: rt722: add settings for rt722VB + - drm/amdgpu: Report individual reset error + - ceph: add checking of wait_for_completion_killable() return value + - ceph: fix potential race condition in ceph_ioctl_lazyio() + - ceph: refactor wake_up_bit() pattern of calling + - x86: uaccess: don't use runtime-const rewriting in modules + - rust: condvar: fix broken intra-doc link + - rust: devres: fix private intra-doc link + - rust: kbuild: workaround `rustdoc` doctests modifier bug + - rust: kbuild: treat `build_error` and `rustdoc` as kernel objects + - media: uvcvideo: Use heuristic to find stream entity + - Revert "wifi: ath10k: avoid unnecessary wait for service ready message" + - tracing: tprobe-events: Fix to register tracepoint correctly + - tracing: tprobe-events: Fix to put tracepoint_user when disable the + tprobe + - net: libwx: fix device bus LAN ID + - scsi: ufs: core: Fix a race condition related to the "hid" attribute + group + - riscv: ptdump: use seq_puts() in pt_dump_seq_puts() macro + - Revert "wifi: ath12k: Fix missing station power save configuration" + - scsi: ufs: core: Revert "Make HID attributes visible" + - Bluetooth: btrtl: Fix memory leak in rtlbt_parse_firmware_v2() + - net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for + bcm63xx + - selftests/net: fix out-of-order delivery of FIN in gro:tcp test + - selftests/net: use destination options instead of hop-by-hop + - selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing + ethtool-common.sh + - net: vlan: sync VLAN features with lower device + - net: dsa: b53: fix resetting speed and pause on forced link + - net: dsa: b53: fix bcm63xx RGMII port link adjustment + - net: dsa: b53: fix enabling ip multicast + - net: dsa: b53: stop reading ARL entries if search is done + - net: dsa: b53: properly bound ARL searches for < 4 ARL bin chips + - sctp: Hold RCU read lock while iterating over address list + - sctp: Hold sock lock while iterating over address list + - net: ionic: add dma_wmb() before ringing TX doorbell + - net: ionic: map SKB after pseudo-header checksum prep + - octeontx2-pf: Fix devm_kcalloc() error checking + - bnxt_en: Fix a possible memory leak in bnxt_ptp_init + - bnxt_en: Always provide max entry and entry size in coredump segments + - bnxt_en: Fix warning in bnxt_dl_reload_down() + - wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup + - io_uring: fix types for region size calulation + - net/mlx5e: Fix return value in case of module EEPROM read error + - net: ti: icssg-prueth: Fix fdb hash size configuration + - net/mlx5e: SHAMPO, Fix header mapping for 64K pages + - net/mlx5e: SHAMPO, Fix skb size check for 64K pages + - net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages + - net: wan: framer: pef2256: Switch to devm_mfd_add_devices() + - net: dsa: microchip: Fix reserved multicast address table programming + - net: bridge: fix MST static key usage + - selftests/vsock: avoid false-positives when checking dmesg + - tracing: Fix memory leaks in create_field_var() + - drm/amd/display: Enable mst when it's detected but yet to be initialized + - wifi: cfg80211: add an hrtimer based delayed work item + - wifi: mac80211: use wiphy_hrtimer_work for ml_reconf_work + - wifi: mac80211: use wiphy_hrtimer_work for ttlm_work + - wifi: mac80211: use wiphy_hrtimer_work for csa.switch_work + - riscv: Fix memory leak in module_frob_arch_sections() + - rtc: rx8025: fix incorrect register reference + - x86/microcode/AMD: Add more known models to entry sign checking + - smb: client: validate change notify buffer before copy + - x86/amd_node: Fix AMD root device caching + - xfs: fix delalloc write failures in software-provided atomic writes + - xfs: fix various problems in xfs_atomic_write_cow_iomap_begin + - x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode + - drm: define NVIDIA DRM format modifiers for GB20x + - drm/nouveau: Advertise correct modifiers on GB20x + - drm/amdgpu/smu: Handle S0ix for vangogh + - drm/amdkfd: Don't clear PT after process killed + - virtio_net: fix alignment for virtio_net_hdr_v1_hash + - lib/crypto: curve25519-hacl64: Fix older clang KASAN workaround for GCC + - scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers + - scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel + ADL + - scsi: ufs: core: Add a quirk to suppress link_startup_again + - drm/amd/display: update color on atomic commit time + - extcon: adc-jack: Cleanup wakeup source only if it was enabled + - kunit: Extend kconfig help text for KUNIT_UML_PCI + - ALSA: hda/tas2781: Enable init_profile_id for device initialization + - ACPI: SPCR: Check for table version when using precise baudrate + - kbuild: Strip trailing padding bytes from modules.builtin.modinfo + - drm/amdgpu: Fix unintended error log in VCN5_0_0 + - drm/amd/display: Fix vupdate_offload_work doc + - drm/amdgpu: Fix function header names in amdgpu_connectors.c + - drm/amdgpu/userq: assign an error code for invalid userq va + - drm/msm/dpu: Fix adjusted mode clock check for 3d merge + - drm/amd/display: Reject modes with too high pixel clock on DCE6-10 + - drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler + - drm/amd/display: Fix black screen with HDMI outputs + - selftests: drv-net: Reload pkt pointer after calling filter_udphdr + - dt-bindings: eeprom: at25: use "size" for FRAMs without device ID + - Linux 6.17.8 + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68316 + - scsi: ufs: core: Fix invalid probe error return value + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40292 + - virtio-net: fix received length check in big packets + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68180 + - drm/amd/display: Fix NULL deref in debugfs odm_combine_segments + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40327 + - perf/core: Fix system hang caused by cpu-clock usage + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40328 + - smb: client: fix potential UAF in smb2_close_cached_fid() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40291 + - io_uring: fix regbuf vector size truncation + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68322 + - parisc: Avoid crash due to unaligned access in unwinder + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40293 + - iommufd: Don't overflow during division for dirty tracking + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40294 + - Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40329 + - drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40295 + - fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40296 + - platform/x86: int3472: Fix double free of GPIO device during unregister + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40297 + - net: bridge: fix use-after-free due to MST port state bypass + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68320 + - lan966x: Fix sleeping in atomic context + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68169 + - netpoll: Fix deadlock in memory allocation under spinlock + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68197 + - bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40330 + - bnxt_en: Shutdown FW DMA in bnxt_shutdown() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68192 + - net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixup + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40331 + - sctp: Prevent TOCTOU out-of-bounds write + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68187 + - net: mdio: Check regmap pointer returned by device_node_to_regmap() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68167 + - gpiolib: fix invalid pointer access in debugfs + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68319 + - netconsole: Acquire su_mutex before navigating configs hierarchy + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40298 + - gve: Implement settime64 with -EOPNOTSUPP + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40299 + - gve: Implement gettimex64 with -EOPNOTSUPP + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40301 + - Bluetooth: hci_event: validate skb length for unknown CC opcode + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40358 + - riscv: stacktrace: Disable KASAN checks for non-current tasks + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68186 + - ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader + catches up + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68184 + - drm/mediatek: Disable AFBC support on Mediatek DRM driver + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40302 + - media: videobuf2: forbid remove_bufs when legacy fileio is active + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40303 + - btrfs: ensure no dirty metadata is written back for an fs with errors + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40362 + - ceph: fix multifs mds auth caps issue + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40332 + - drm/amdkfd: Fix mmap write lock not release + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40304 + - fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40305 + - 9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68318 + - clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40209 + - btrfs: fix memory leak of qgroup_list in btrfs_add_qgroup_relation + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68183 + - ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68173 + - ftrace: Fix softlockup in ftrace_module_enable + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40306 + - orangefs: fix xattr related buffer overflow... + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40307 + - exfat: validate cluster allocation bits of the allocation bitmap + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40308 + - Bluetooth: bcsp: receive data only if registered + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40309 + - Bluetooth: SCO: Fix UAF on sco_conn_free + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68174 + - amd/amdkfd: enhance kfd process check in switch partition + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40310 + - amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40361 + - fs: ext4: change GFP_KERNEL to GFP_NOFS to avoid deadlock + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40311 + - accel/habanalabs: support mapping cb with vmalloc-backed coherent memory + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68185 + - nfs4_setup_readdir(): insufficient locking for ->d_parent->d_inode + dereferencing + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68176 + - PCI: cadence: Check for the existence of cdns_pcie::ops before using it + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68190 + - drm/amdgpu/atom: Check kcalloc() for WS buffer in + amdgpu_atom_execute_table_locked() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68168 + - jfs: fix uninitialized waitqueue in transaction manager + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40312 + - jfs: Verify inode mode when loading from disk + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40333 + - f2fs: fix infinite loop in __insert_extent_tree() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68321 + - page_pool: always add GFP_NOWARN for ATOMIC allocations + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40334 + - drm/amdgpu: validate userq buffer virtual address and size + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68191 + - udp_tunnel: use netdev_warn() instead of netdev_WARN() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68309 + - PCI/AER: Fix NULL pointer access by aer_info + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40313 + - ntfs3: pretend $Extend records as regular files + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40335 + - drm/amdgpu: validate userq input args + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40314 + - usb: cdns3: gadget: Use-after-free during failed initialization and exit + of cdnsp gadget + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40336 + - drm/gpusvm: fix hmm_pfn_to_map_order() usage + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68193 + - drm/xe/guc: Add devm release action to safely tear down CT + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68175 + - media: nxp: imx8-isi: Fix streaming cleanup on release + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68188 + - tcp: use dst_dev_rcu() in tcp_fastopen_active_disable_ofo_check() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68315 + - f2fs: fix to detect potential corrupted nid in free_nid_list + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40337 + - net: stmmac: Correctly handle Rx checksum offload errors + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40338 + - ASoC: Intel: avs: Do not share the name pointer between components + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40339 + - drm/amdgpu: fix nullptr err of vm_handle_moved + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68194 + - media: imon: make send_packet() more robust + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40363 + - net: ipv6: fix field-spanning memcpy warning in AH output + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68311 + - tty: serial: ip22zilog: Use platform device for probing + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40340 + - drm/xe: Fix oops in xe_gem_fault when running core_hotunplug test. + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68196 + - drm/amd/display: Cache streams targeting link when performing LT + automation + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68178 + - blk-cgroup: fix possible deadlock while configuring policy + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40341 + - futex: Don't leak robust_list pointer on exec race + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40342 + - nvme-fc: use lock accessing port_state and rport state + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40343 + - nvmet-fc: avoid scheduling association deletion twice + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68177 + - cpufreq/longhaul: handle NULL policy in longhaul_exit + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68317 + - io_uring/zctx: check chained notif contexts + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40315 + - usb: gadget: f_fs: Fix epfile null pointer access after ep enable. + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40316 + - drm/mediatek: Fix device use-after-free on unbind + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40360 + - drm/sysfb: Do not dereference NULL pointer in plane reset + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68179 + - s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68310 + - s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40317 + - regmap: slimbus: fix bus_context pointer in regmap init calls + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40359 + - perf/x86/intel: Fix KASAN global-out-of-bounds warning + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68181 + - drm/radeon: Remove calls to drm_put_dev() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68170 + - drm/radeon: Do not kfree() devres managed rdev + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40213 + - Bluetooth: MGMT: fix crash in set_mesh_sync and set_mesh_complete + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40318 + - Bluetooth: hci_sync: fix race in hci_cmd_sync_dequeue_once + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68312 + - usbnet: Prevents free active kevent + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40344 + - ASoC: Intel: avs: Disable periods-elapsed work when closing PCM + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68172 + - crypto: aspeed - fix double free caused by devm + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40319 + - bpf: Sync pending IRQ work before freeing ring buffer + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68182 + - wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68314 + - drm/msm: make sure last_fence is always updated + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68189 + - drm/msm: Fix GEM free for imported dma-bufs + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68171 + - x86/fpu: Ensure XFD state on signal delivery + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-68313 + - x86/CPU/AMD: Add RDSEED fix for Zen5 + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40320 + - smb: client: fix potential cfid UAF in smb2_query_info_compound + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40321 + - wifi: brcmfmac: fix crash while sending Action Frames in standalone AP + Mode + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40322 + - fbdev: bitblit: bound-check glyph index in bit_putcs* + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40211 + - ACPI: video: Fix use-after-free in acpi_video_switch_brightness() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40323 + - fbcon: Set fb_display[i]->mode to NULL when the mode is released + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40210 + - Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40324 + - NFSD: Fix crash in nfsd4_read_release() + + * Questing update: v6.17.8 upstream stable release (LP: #2136833) // + CVE-2025-40326 + - NFSD: Define actions for the new time_deleg FATTR4 attributes + + * Questing update: v6.17.7 upstream stable release (LP: #2136813) + - sched_ext: Move internal type and accessor definitions to ext_internal.h + - sched_ext: Put event_stats_cpu in struct scx_sched_pcpu + - sched_ext: Sync error_irq_work before freeing scx_sched + - timekeeping: Fix aux clocks sysfs initialization loop bound + - x86/bugs: Report correct retbleed mitigation status + - x86/bugs: Qualify RETBLEED_INTEL_MSG + - genirq/chip: Add buslock back in to irq_set_handler() + - genirq/manage: Add buslock back in to __disable_irq_nosync() + - genirq/manage: Add buslock back in to enable_irq() + - audit: record fanotify event regardless of presence of rules + - EDAC/ie31200: Add two more Intel Alder Lake-S SoCs for EDAC support + - perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK + - perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of + current->mm == NULL + - perf: Have get_perf_callchain() return NULL if crosstask and user are + set + - perf: Skip user unwind if the task is a kernel thread + - EDAC: Fix wrong executable file modes for C source files + - seccomp: passthrough uprobe systemcall without filtering + - sched_ext: Keep bypass on between enable failure and + scx_disable_workfn() + - x86/bugs: Add attack vector controls for VMSCAPE + - x86/bugs: Fix reporting of LFENCE retpoline + - EDAC/mc_sysfs: Increase legacy channel support to 16 + - cpuset: Use new excpus for nocpu error check when enabling root + partition + - btrfs: abort transaction on specific error places when walking log tree + - btrfs: abort transaction in the process_one_buffer() log tree walk + callback + - btrfs: zoned: return error from btrfs_zone_finish_endio() + - btrfs: zoned: refine extent allocator hint selection + - btrfs: scrub: replace max_t()/min_t() with clamp() in + scrub_throttle_dev_io() + - btrfs: always drop log root tree reference in btrfs_replay_log() + - btrfs: use level argument in log tree walk callback replay_one_buffer() + - btrfs: abort transaction if we fail to update inode in log replay dir + fixup + - btrfs: tree-checker: add inode extref checks + - btrfs: use smp_mb__after_atomic() when forcing COW in + create_pending_snapshot() + - sched_ext: Make qmap dump operation non-destructive + - arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c + - btrfs: tree-checker: fix bounds check in check_inode_extref() + - Linux 6.17.7 + + * [UBUNTU 24.04] KVM: s390: improve interrupt cpu for wakeup (LP: #2132317) + - KVM: s390: improve interrupt cpu for wakeup + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) + - sched/fair: Block delayed tasks on throttled hierarchy during dequeue + - vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ + - expfs: Fix exportfs_can_encode_fh() for EXPORT_FH_FID + - cgroup/misc: fix misc_res_type kernel-doc warning + - dlm: move to rinfo for all middle conversion cases + - exec: Fix incorrect type for ret + - s390/pkey: Forward keygenflags to ep11_unwrapkey + - hfs: clear offset and space out of valid records in b-tree node + - hfs: make proper initalization of struct hfs_find_data + - hfs: validate record offset in hfsplus_bmap_alloc + - hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat() + - dlm: check for defined force value in dlm_lockspace_release + - hfsplus: return EIO when type of hidden directory mismatch in + hfsplus_fill_super() + - PCI: Test for bit underflow in pcie_set_readrq() + - lkdtm: fortify: Fix potential NULL dereference on kmalloc failure + - arm64: sysreg: Correct sign definitions for EIESB and DoubleLock + - m68k: bitops: Fix find_*_bit() signatures + - powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure + - riscv: mm: Return intended SATP mode for noXlvl options + - riscv: mm: Use mmu-type from FDT to limit SATP mode + - riscv: cpufeature: add validation for zfa, zfh and zfhmin + - drivers/perf: hisi: Relax the event ID check in the framework + - s390/mm: Use __GFP_ACCOUNT for user page table allocations + - smb: client: queue post_recv_credits_work also if the peer raises the + credit target + - smb: client: limit the range of info->receive_credit_target + - smb: client: make use of ib_wc_status_msg() and skip IB_WC_WR_FLUSH_ERR + logging + - smb: server: let smb_direct_flush_send_list() invalidate a remote key + first + - Unbreak 'make tools/*' for user-space targets + - platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init + - cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate + - net/mlx5e: Return 1 instead of 0 in invalid case in + mlx5e_mpwrq_umr_entry_size() + - rtnetlink: Allow deleting FDB entries in user namespace + - net: enetc: fix the deadlock of enetc_mdio_lock + - net: enetc: correct the value of ENETC_RXB_TRUESIZE + - dpaa2-eth: fix the pointer passed to PTR_ALIGN on Tx path + - net: phy: realtek: fix rtl8221b-vm-cg name + - can: bxcan: bxcan_start_xmit(): use can_dev_dropped_skb() instead of + can_dropped_invalid_skb() + - can: esd: acc_start_xmit(): use can_dev_dropped_skb() instead of + can_dropped_invalid_skb() + - can: rockchip-canfd: rkcanfd_start_xmit(): use can_dev_dropped_skb() + instead of can_dropped_invalid_skb() + - selftests: net: fix server bind failure in sctp_vrf.sh + - net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for legacy RQ + - net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding + RQ + - net/smc: fix general protection fault in __smc_diag_dump + - net: ethernet: ti: am65-cpts: fix timestamp loss due to race conditions + - arm64, mm: avoid always making PTE dirty in pte_mkwrite() + - erofs: avoid infinite loops due to corrupted subpage compact indexes + - net: hibmcge: select FIXED_PHY + - ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop + - net: hsr: prevent creation of HSR device with slaves from another netns + - espintcp: use datagram_poll_queue for socket readiness + - net: datagram: introduce datagram_poll_queue for custom receive queues + - ovpn: use datagram_poll_queue for socket readiness in TCP + - net: bonding: fix possible peer notify event loss or dup issue + - hung_task: fix warnings caused by unaligned lock pointers + - mm: don't spin in add_stack_record when gfp flags don't allow + - dma-debug: don't report false positives with + DMA_BOUNCE_UNALIGNED_KMALLOC + - arch_topology: Fix incorrect error check in + topology_parse_cpu_capacity() + - riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot + - io_uring/sqpoll: switch away from getrusage() for CPU accounting + - io_uring/sqpoll: be smarter on when to update the stime usage + - btrfs: send: fix duplicated rmdir operations when using extrefs + - btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree() + - gpio: pci-idio-16: Define maximum valid register address offset + - gpio: 104-idio-16: Define maximum valid register address offset + - xfs: fix locking in xchk_nlinks_collect_dir + - platform/x86: alienware-wmi-wmax: Add AWCC support to Dell G15 5530 + - Revert "cpuidle: menu: Avoid discarding useful information" + - riscv: cpufeature: avoid uninitialized variable in + has_thead_homogeneous_vlenb() + - rust: device: fix device context of Device::parent() + - slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts + - slab: Fix obj_ext mistakenly considered NULL due to race condition + - smb: client: get rid of d_drop() in cifs_do_rename() + - ACPICA: Work around bogus -Wstringop-overread warning since GCC 11 + - arm64: mte: Do not warn if the page is already tagged in copy_highpage() + - can: netlink: can_changelink(): allow disabling of automatic restart + - cifs: Fix TCP_Server_Info::credits to be signed + - devcoredump: Fix circular locking dependency with devcd->mutex. + - hwmon: (pmbus/max34440) Update adpm12160 coeff due to latest FW + - MIPS: Malta: Fix keyboard resource preventing i8042 driver from + registering + - rv: Make rtapp/pagefault monitor depends on CONFIG_MMU + - net: bonding: update the slave array for broadcast mode + - net: stmmac: dwmac-rk: Fix disabling set_clock_selection + - net: usb: rtl8150: Fix frame padding + - net: ravb: Enforce descriptor type ordering + - net: ravb: Ensure memory write completes before ringing TX doorbell + - mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR + - selftests: mptcp: join: mark 'flush re-add' as skipped if not supported + - selftests: mptcp: join: mark implicit tests as skipped if not supported + - selftests: mptcp: join: mark 'delete re-add signal' as skipped if not + supported + - mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap + - drm/xe: Check return value of GGTT workqueue allocation + - drm/amd/display: increase max link count and fix link->enc NULL pointer + access + - mm/damon/core: use damos_commit_quota_goal() for new goal commit + - mm/damon/core: fix list_add_tail() call on damon_call() + - spi: rockchip-sfc: Fix DMA-API usage + - firmware: arm_ffa: Add support for IMPDEF value in the memory access + descriptor + - spi: spi-nxp-fspi: add the support for sample data from DQS pad + - spi: spi-nxp-fspi: re-config the clock rate when operation require new + clock rate + - spi: spi-nxp-fspi: add extra delay after dll locked + - spi: spi-nxp-fspi: limit the clock rate for different sample clock + source selection + - spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER + - arm64: dts: broadcom: bcm2712: Add default GIC address cells + - arm64: dts: broadcom: bcm2712: Define VGIC interrupt + - include: trace: Fix inflight count helper on failed initialization + - firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw + mode + - spi: airoha: return an error for continuous mode dirmap creation cases + - spi: airoha: add support of dual/quad wires spi modes to exec_op() + handler + - spi: airoha: switch back to non-dma mode in the case of error + - spi: airoha: fix reading/writing of flashes with more than one plane per + lun + - sysfs: check visibility before changing group attribute ownership + - RISC-V: Define pgprot_dmacoherent() for non-coherent devices + - RISC-V: Don't print details of CPUs disabled in DT + - riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id() + - hwmon: (pmbus/isl68137) Fix child node reference leak on early return + - hwmon: (sht3x) Fix error handling + - io_uring: fix incorrect unlikely() usage in io_waitid_prep() + - nbd: override creds to kernel when calling sock_{send,recv}msg() + - drm/panic: Fix drawing the logo on a small narrow screen + - drm/panic: Fix qr_code, ensure vmargin is positive + - drm/panic: Fix 24bit pixel crossing page boundaries + - of/irq: Convert of_msi_map_id() callers to of_msi_xlate() + - of/irq: Add msi-parent check to of_msi_xlate() + - block: require LBA dma_alignment when using PI + - gpio: ljca: Fix duplicated IRQ mapping + - io_uring: correct __must_hold annotation in io_install_fixed_file + - sched: Remove never used code in mm_cid_get() + - USB: serial: option: add UNISOC UIS7720 + - USB: serial: option: add Quectel RG255C + - USB: serial: option: add Telit FN920C04 ECM compositions + - usb/core/quirks: Add Huawei ME906S to wakeup quirk + - usb: raw-gadget: do not limit transfer length + - xhci: dbc: enable back DbC in resume if it was enabled before suspend + - xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall + event + - x86/microcode: Fix Entrysign revision check for Zen1/Naples + - binder: remove "invalid inc weak" check + - mei: me: add wildcat lake P DID + - objtool/rust: add one more `noreturn` Rust function + - nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE + - misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup + - most: usb: hdm_probe: Fix calling put_device() before device + initialization + - tcpm: switch check for role_sw device with fw_node + - dt-bindings: serial: sh-sci: Fix r8a78000 interrupts + - dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp + - dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100 + - serial: 8250_dw: handle reset control deassert error + - serial: 8250_exar: add support for Advantech 2 port card with Device ID + 0x0018 + - serial: 8250_mtk: Enable baud clock and manage in runtime PM + - serial: sc16is7xx: remove useless enable of enhanced features + - staging: gpib: Fix device reference leak in fmh_gpib driver + - staging: gpib: Fix no EOI on 1 and 2 byte writes + - staging: gpib: Return -EINTR on device clear + - staging: gpib: Fix sending clear and trigger events + - mm/migrate: remove MIGRATEPAGE_UNMAP + - treewide: remove MIGRATEPAGE_SUCCESS + - vmw_balloon: indicate success when effectively deflating during + migration + - xfs: always warn about deprecated mount options + - gpio: regmap: Allow to allocate regmap-irq device + - gpio: regmap: add the .fixed_direction_output configuration parameter + - gpio: idio-16: Define fixed direction of the GPIO lines + - Linux 6.17.6 + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40084 + - ksmbd: transport_ipc: validate payload size before reading handle + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40222 + - tty: serial: sh-sci: fix RSCI FIFO overrun handling + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40223 + - most: usb: Fix use-after-free in hdm_disconnect + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40106 + - comedi: fix divide-by-zero in comedi_buf_munge() + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40224 + - hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc() + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40225 + - drm/panthor: Fix kernel panic on partial unmap of a GPU VA region + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40226 + - firmware: arm_scmi: Account for failed debug initialization + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40227 + - mm/damon/sysfs: dealloc commit test ctx always + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40228 + - mm/damon/sysfs: catch commit test ctx alloc failure + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40229 + - mm/damon/core: fix potential memory leak by cleaning ops_filter in + damon_destroy_scheme + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40230 + - mm: prevent poison consumption when splitting THP + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40231 + - vsock: fix lock inversion in vsock_assign_transport() + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40233 + - ocfs2: clear extent cache after moving/defragmenting extents + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40235 + - btrfs: directly free partially initialized fs_info in + btrfs_check_leaked_roots() + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40236 + - virtio-net: zero unused hash fields + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40237 + - fs/notify: call exportfs_encode_fid with s_umount + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40238 + - net/mlx5: Fix IPsec cleanup over MPV device + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40239 + - net: phy: micrel: always set shared->phydev for LAN8814 + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40240 + - sctp: avoid NULL dereference when chunk data buffer is missing + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40241 + - erofs: fix crafted invalid cases for encoded extents + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40242 + - gfs2: Fix unlikely race in gdlm_put_lock + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40243 + - hfs: fix KMSAN uninit-value issue in hfs_find_set_zero_bits() + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40244 + - hfsplus: fix KMSAN uninit-value issue in __hfsplus_ext_cache_extent() + + * Questing update: v6.17.6 upstream stable release (LP: #2134982) // + CVE-2025-40245 + - nios2: ensure that memblock.current_limit is set when setting pfn limits + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) + - docs: kdoc: handle the obsolescensce of docutils.ErrorString() + - Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP" + - PCI: vmd: Override irq_startup()/irq_shutdown() in + vmd_init_dev_msi_info() + - ata: libata-core: relax checks in ata_read_log_directory() + - arm64/sysreg: Fix GIC CDEOI instruction encoding + - ixgbevf: fix getting link speed data for E610 devices + - rust: cfi: only 64-bit arm and x86 support CFI_CLANG + - x86/CPU/AMD: Prevent reset reasons from being retained across reboot + - slab: reset slab->obj_ext when freeing and it is OBJEXTS_ALLOC_FAIL + - Revert "io_uring/rw: drop -EOPNOTSUPP check in + __io_complete_rw_common()" + - io_uring: protect mem region deregistration + - Revert "drm/amd/display: Only restore backlight after amdgpu_dm_init or + dm_resume" + - r8152: add error handling in rtl8152_driver_init + - net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in + lan78xx_write_raw_eeprom + - f2fs: fix wrong block mapping for multi-devices + - gve: Check valid ts bit on RX descriptor before hw timestamping + - jbd2: ensure that all ongoing I/O complete before freeing blocks + - ext4: wait for ongoing I/O to complete before freeing blocks + - btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already + running + - btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl + - btrfs: only set the device specific options after devices are opened + - btrfs: fix incorrect readahead expansion length + - can: gs_usb: gs_make_candev(): populate net_device->dev_port + - can: gs_usb: increase max interface to U8_MAX + - cxl/acpi: Fix setup of memory resource in cxl_acpi_set_cache_size() + - ALSA: hda/intel: Add MSI X870E Tomahawk to denylist + - ALSA: hda/realtek: Add quirk entry for HP ZBook 17 G6 + - drm/amdgpu: use atomic functions with memory barriers for vm fault info + - drm/amdgpu: fix gfx12 mes packet status return check + - drm/xe: Increase global invalidation timeout to 1000us + - perf/core: Fix address filter match with backing files + - perf/core: Fix MMAP event path names with backing files + - perf/core: Fix MMAP2 event device with backing files + - drm/amd: Check whether secure display TA loaded successfully + - PM: hibernate: Add pm_hibernation_mode_is_suspend() + - drm/amd: Fix hybrid sleep + - usb: gadget: Store endpoint pointer in usb_request + - usb: gadget: Introduce free_usb_request helper + - HID: multitouch: fix sticky fingers + - dax: skip read lock assertion for read-only filesystems + - coredump: fix core_pattern input validation + - can: m_can: m_can_plat_remove(): add missing pm_runtime_disable() + - can: m_can: m_can_handle_state_errors(): fix CAN state transition to + Error Active + - can: m_can: m_can_chip_config(): bring up interface in correct state + - can: m_can: fix CAN state in system PM + - net: mtk: wed: add dma mask limitation and GFP_DMA32 for device with + more than 4GB DRAM + - net: dlink: handle dma_map_single() failure properly + - doc: fix seg6_flowlabel path + - can: j1939: add missing calls in NETDEV_UNREGISTER notification handler + - dpll: zl3073x: Refactor DPLL initialization + - dpll: zl3073x: Handle missing or corrupted flash configuration + - r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H + - net: phy: bcm54811: Fix GMII/MII/MII-Lite selection + - net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present + - amd-xgbe: Avoid spurious link down messages during interface toggle + - Octeontx2-af: Fix missing error code in cgx_probe() + - tcp: fix tcp_tso_should_defer() vs large RTT + - net: airoha: Take into account out-of-order tx completions in + airoha_dev_xmit() + - selftests: net: check jq command is supported + - net: core: fix lockdep splat on device unregister + - ksmbd: fix recursive locking in RPC handle list access + - tg3: prevent use of uninitialized remote_adv and local_adv variables + - tls: trim encrypted message to match the plaintext on short splice + - tls: wait for async encrypt in case of error during latter iterations of + sendmsg + - tls: always set record_type in tls_process_cmsg + - tls: don't rely on tx_work during send() + - netdevsim: set the carrier when the device goes up + - net: usb: lan78xx: fix use of improperly initialized dev->chipid in + lan78xx_reset + - drm/panthor: Ensure MCU is disabled on suspend + - nvme-multipath: Skip nr_active increments in RETRY disposition + - riscv: kprobes: Fix probe address validation + - drm/bridge: lt9211: Drop check for last nibble of version register + - powerpc/fadump: skip parameter area allocation when fadump is disabled + - ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec + - ASoC: nau8821: Cancel jdet_work before handling jack ejection + - ASoC: nau8821: Generalize helper to clear IRQ status + - ASoC: nau8821: Consistently clear interrupts before unmasking + - ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit + - drm/i915/guc: Skip communication warning on reset in progress + - drm/i915/frontbuffer: Move bo refcounting + intel_frontbuffer_{get,release}() + - drm/i915/fb: Fix the set_tiling vs. addfb race, again + - drm/amdgpu: add ip offset support for cyan skillfish + - drm/amdgpu: add support for cyan skillfish without IP discovery + - drm/amdgpu: fix handling of harvesting for ip_discovery firmware + - drm/amdgpu: handle wrap around in reemit handling + - drm/amdgpu: set an error on all fences from a bad context + - drm/amdgpu: drop unused structures in amdgpu_drm.h + - drm/amd/powerplay: Fix CIK shutdown temperature + - drm/xe: Enable media sampler power gating + - drm/draw: fix color truncation in drm_draw_fill24 + - drm/rockchip: vop2: use correct destination rectangle height check + - HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to + edge detection + - sched/fair: Fix pelt lost idle time detection + - ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings + - accel/qaic: Synchronize access to DBC request queue head & tail pointer + - nvme-auth: update sc_c in host response + - cxl/trace: Subtract to find an hpa_alias0 in cxl_poison events + - selftests/bpf: make arg_parsing.c more robust to crashes + - blk-mq: fix stale tag depth for shared sched tags in + blk_mq_update_nr_requests() + - block: Remove elevator_lock usage from blkg_conf frozen operations + - HID: hid-input: only ignore 0 battery events for digitizers + - HID: multitouch: fix name of Stylus input devices + - drm/xe/evict: drop bogus assert + - selftests: arg_parsing: Ensure data is flushed to disk before reading. + - nvme/tcp: handle tls partially sent records in write_space() + - rust: cpufreq: fix formatting + - arm64: debug: always unmask interrupts in el0_softstp() + - arm64: cputype: Add Neoverse-V3AE definitions + - arm64: errata: Apply workarounds for Neoverse-V3AE + - xfs: rename the old_crc variable in xlog_recover_process + - xfs: fix log CRC mismatches between i386 and other architectures + - NFSD: Rework encoding and decoding of nfsd4_deviceid + - NFSD: Minor cleanup in layoutcommit processing + - NFSD: Implement large extent array support in pNFS + - NFSD: Fix last write offset handling in layoutcommit + - phy: cdns-dphy: Store hs_clk_rate and return it + - phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling + - x86/resctrl: Refactor resctrl_arch_rmid_read() + - x86/resctrl: Fix miscount of bandwidth event when reactivating + previously unavailable RMID + - cxl: Fix match_region_by_range() to use region_res_match_cxl_range() + - phy: cadence: cdns-dphy: Update calibration wait time for startup state + machine + - drm/xe: Use devm_ioremap_wc for VRAM mapping and drop manual unmap + - drm/xe: Use dynamic allocation for tile and device VRAM region + structures + - drm/xe: Move struct xe_vram_region to a dedicated header + - drm/xe: Unify the initialization of VRAM regions + - drm/xe: Move rebar to be done earlier + - PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage + - drm/xe: Fix an IS_ERR() vs NULL bug in xe_tile_alloc_vram() + - Linux 6.17.5 + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40086 + - drm/xe: Don't allow evicting of BOs in same VM in array of VM binds + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40087 + - NFSD: Define a proc_layoutcommit for the FlexFiles layout type + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40088 + - hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40162 + - ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40085 + - ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40172 + - accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40177 + - accel/qaic: Fix bootlog initialization ordering + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40163 + - sched/deadline: Stop dl_server before CPU goes offline + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40174 + - x86/mm: Fix SMP ordering in switch_mm_irqs_off() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40089 + - cxl/features: Add check for no entries in cxl_feature_info + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40176 + - tls: wait for pending async decryptions if tls_strp_msg_hold fails + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40164 + - usbnet: Fix using smp_processor_id() in preemptible code warnings + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40091 + - ixgbe: fix too early devlink_free() in ixgbe_remove() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40175 + - idpf: cleanup remaining SKBs in PTP flows + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40173 + - net/ip6_tunnel: Prevent perpetual tunnel growth + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40092 + - usb: gadget: f_ncm: Refactor bind path to use __free() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40093 + - usb: gadget: f_ecm: Refactor bind path to use __free() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40094 + - usb: gadget: f_acm: Refactor bind path to use __free() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40095 + - usb: gadget: f_rndis: Refactor bind path to use __free() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40165 + - media: nxp: imx8-isi: m2m: Fix streaming cleanup on release + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40096 + - drm/sched: Fix potential double free in + drm_sched_job_add_resv_dependencies + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40097 + - ALSA: hda: Fix missing pointer check in hda_component_manager_init + function + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40098 + - ALSA: hda: cs35l41: Fix NULL pointer dereference in + cs35l41_get_acpi_mute_state() + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40099 + - cifs: parse_dfs_referrals: prevent oob on malformed input + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40100 + - btrfs: do not assert we found block group item when creating free space + tree + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40101 + - btrfs: fix memory leaks when rejecting a non SINGLE data profile without + an RST + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40167 + - ext4: detect invalid INLINE_DATA + EXTENTS flag combination + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40102 + - KVM: arm64: Prevent access to vCPU events before init + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40103 + - smb: client: Fix refcount leak for cifs_sb_tlink + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40104 + - ixgbevf: fix mailbox API compatibility by negotiating supported features + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40166 + - drm/xe/guc: Check GuC running state before deregistering exec queue + + * Questing update: v6.17.5 upstream stable release (LP: #2133557) // + CVE-2025-40105 + - vfs: Don't leak disconnected dentries on umount + + * The machine didn’t go into suspend and got stuck (LP: #2132095) + - platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep + handlers + + * CAP_PERFMON insufficient to get perf data (LP: #2131046) + - SAUCE: perf/core: Allow CAP_PERFMON for paranoid level 4 + + * Poweroff not working consistently after upgrading kernel 6.14.0-17.17 or + later (LP: #2115860) + - drm/amd: Unify shutdown() callback behavior + - drm/amd: Stop exporting amdgpu_device_ip_suspend() outside amdgpu_device + - drm/amd: Remove comment about handling errors in + amdgpu_device_ip_suspend_phase1() + - drm/amd: Don't always set IP block HW status to false + - drm/amd: Pass IP suspend errors up to callers + - drm/amd: Avoid evicting resources at S5 + + * Re-enable INTEL_SKL_INT3472 for kernels >= 6.16 for Intel IPU camera + (LP: #2128792) + - Revert "UBUNTU: [Config] FTBFS: disable INTEL_SKL_INT3472" + - Revert "UBUNTU: SAUCE: platform/x86: int3472: Add handshake GPIO + function" + + * Support Samsung S5K3J1 sensor for Intel MIPI camera (LP: #2121852) + - SAUCE: media: ipu-bridge: Support s5k3j1 sensor + + * Questing update: v6.17.4 upstream stable release (LP: #2131259) + - fs: always return zero on success from replace_fd() + - fscontext: do not consume log entries when returning -EMSGSIZE + - btrfs: fix the incorrect max_bytes value for find_lock_delalloc_range() + - arm64: map [_text, _stext) virtual address range non-executable+read- + only + - rseq: Protect event mask against membarrier IPI + - statmount: don't call path_put() under namespace semaphore + - listmount: don't call path_put() under namespace semaphore + - clocksource/drivers/clps711x: Fix resource leaks in error paths + - memcg: skip cgroup_file_notify if spinning is not allowed + - page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches + - PM: runtime: Update kerneldoc return codes + - dma-mapping: fix direction in dma_alloc direction traces + - cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency + - nfsd: unregister with rpcbind when deleting a transport + - KVM: x86: Add helper to retrieve current value of user return MSR + - KVM: SVM: Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 + - iio: frequency: adf4350: Fix ADF4350_REG3_12BIT_CLKDIV_MODE + - media: v4l2-subdev: Fix alloc failure check in + v4l2_subdev_call_state_try() + - asm-generic/io.h: Skip trace helpers if rwmmio events are disabled + - clk: npcm: select CONFIG_AUXILIARY_BUS + - clk: thead: th1520-ap: describe gate clocks with clk_gate + - clk: thead: th1520-ap: fix parent of padctrl0 clock + - clk: thead: Correct parent for DPU pixel clocks + - clk: renesas: r9a08g045: Add MSTOP for GPIO + - perf disasm: Avoid undefined behavior in incrementing NULL + - perf test trace_btf_enum: Skip if permissions are insufficient + - perf evsel: Avoid container_of on a NULL leader + - libperf event: Ensure tracing data is multiple of 8 sized + - clk: qcom: common: Fix NULL vs IS_ERR() check in qcom_cc_icc_register() + - clk: qcom: Select the intended config in QCS_DISPCC_615 + - perf parse-events: Handle fake PMUs in CPU terms + - clk: at91: peripheral: fix return value + - clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init() + - perf: Completely remove possibility to override MAX_NR_CPUS + - perf drm_pmu: Fix fd_dir leaks in for_each_drm_fdinfo_in_dir() + - perf util: Fix compression checks returning -1 as bool + - rtc: x1205: Fix Xicor X1205 vendor prefix + - rtc: optee: fix memory leak on driver removal + - perf arm_spe: Correct setting remote access + - perf arm_spe: Correct memory level for remote access + - perf vendor events arm64 AmpereOneX: Fix typo - should be + l1d_cache_access_prefetches + - perf test: AMD IBS swfilt skip kernel tests if paranoia is >1 + - perf test shell lbr: Avoid failures with perf event paranoia + - perf trace: Fix IS_ERR() vs NULL check bug + - perf session: Fix handling when buffer exceeds 2 GiB + - perf test: Don't leak workload gopipe in PERF_RECORD_* + - perf evsel: Fix uniquification when PMU given without suffix + - perf test: Avoid uncore_imc/clockticks in uniquification test + - perf evsel: Ensure the fallback message is always written to + - perf build-id: Ensure snprintf string is empty when size is 0 + - clk: mediatek: mt8195-infra_ao: Fix parent for infra_ao_hdmi_26m + - clk: mediatek: clk-mux: Do not pass flags to + clk_mux_determine_rate_flags() + - clk: nxp: lpc18xx-cgu: convert from round_rate() to determine_rate() + - clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver + - clk: tegra: do not overallocate memory for bpmp clocks + - nfsd: fix assignment of ia_ctime.tv_nsec on delegated mtime update + - nfsd: ignore ATTR_DELEG when checking ia_valid before notify_change() + - vfs: add ATTR_CTIME_SET flag + - nfsd: use ATTR_CTIME_SET for delegated ctime updates + - nfsd: track original timestamps in nfs4_delegation + - nfsd: fix SETATTR updates for delegated timestamps + - nfsd: fix timestamp updates in CB_GETATTR + - tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64 + - PM: core: Annotate loops walking device links as _srcu + - PM: core: Add two macros for walking device links + - PM: sleep: Do not wait on SYNC_STATE_ONLY device links + - cpufreq: tegra186: Set target frequency for all cpus in policy + - scsi: mvsas: Fix use-after-free bugs in mvs_work_queue + - perf bpf-filter: Fix opts declaration on older libbpfs + - scsi: ufs: sysfs: Make HID attributes visible + - mshv: Handle NEED_RESCHED_LAZY before transferring to guest + - perf bpf_counter: Fix handling of cpumap fixing hybrid + - ASoC: SOF: ipc4-topology: Correct the minimum host DMA buffer size + - ASoC: SOF: ipc4-topology: Account for different ChainDMA host buffer + size + - ASoC: SOF: Intel: hda-pcm: Place the constraint on period time instead + of buffer time + - LoongArch: Add cflag -fno-isolate-erroneous-paths-dereference + - LoongArch: Fix build error for LTO with LLVM-18 + - LoongArch: Init acpi_gbl_use_global_lock to false + - ASoC: SOF: Intel: Read the LLP via the associated Link DMA channel + - net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in + lan78xx_read_raw_eeprom + - net/mlx4: prevent potential use after free in mlx4_en_do_uc_filter() + - drm/xe/hw_engine_group: Fix double write lock release in error path + - drm/xe/i2c: Don't rely on d3cold.allowed flag in system PM path + - s390/cio: Update purge function to unregister the unused subchannels + - drm/vmwgfx: Fix a null-ptr access in the cursor snooper + - drm/vmwgfx: Fix Use-after-free in validation + - drm/vmwgfx: Fix copy-paste typo in validation + - net/sctp: fix a null dereference in sctp_disposition + sctp_sf_do_5_1D_ce() + - tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request(). + - net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work + - selftest: net: ovpn: Fix uninit return values + - ice: ice_adapter: release xa entry on adapter allocation failure + - net: fsl_pq_mdio: Fix device node reference leak in fsl_pq_mdio_probe + - tools build: Align warning options with perf + - perf python: split Clang options when invoking Popen + - tcp: take care of zero tp->window_clamp in tcp_set_rcvlowat() + - mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call + - mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes + - mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop + - mailbox: zynqmp-ipi: Fix SGI cleanup on unbind + - bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} + - net: mdio: mdio-i2c: Hold the i2c bus lock during smbus transactions + - net: sparx5/lan969x: fix flooding configuration on bridge join/leave + - net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables + - net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed + - mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data() + - drm/amdgpu: Add additional DCE6 SCL registers + - drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs + - drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6 + - drm/amd/display: Properly disable scaling on DCE6 + - drm/amd/display: Disable scaling on DCE6 for now + - drm/amdkfd: Fix kfd process ref leaking when userptr unmapping + - net: pse-pd: tps23881: Fix current measurement scaling + - crypto: skcipher - Fix reqsize handling + - netfilter: nft_objref: validate objref and objrefmap expressions + - bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu() + - selftests: netfilter: nft_fib.sh: fix spurious test failures + - selftests: netfilter: query conntrack state to check for port clash + resolution + - io_uring/zcrx: increment fallback loop src offset + - net: airoha: Fix loopback mode configuration for GDM2 port + - cifs: Fix copy_to_iter return value check + - smb: client: fix missing timestamp updates after utime(2) + - rtc: isl12022: Fix initial enable_irq/disable_irq balance + - cifs: Query EA $LXMOD in cifs_query_path_info() for WSL reparse points + - tpm_tis: Fix incorrect arguments in tpm_tis_probe_irq_single + - gpio: wcd934x: mark the GPIO controller as sleeping + - bpf: Avoid RCU context warning when unpinning htab with internal structs + - kbuild: always create intermediate vmlinux.unstripped + - kbuild: keep .modinfo section in vmlinux.unstripped + - kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux + - kbuild: Add '.rel.*' strip pattern for vmlinux + - s390: vmlinux.lds.S: Reorder sections + - s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections + - ACPICA: acpidump: drop ACPI_NONSTRING attribute from file_name + - ACPI: property: Fix buffer properties extraction for subnodes + - ACPI: TAD: Add missing sysfs_remove_group() for ACPI_TAD_RT + - ACPICA: Debugger: drop ACPI_NONSTRING attribute from name_seg + - ACPI: debug: fix signedness issues in read/write helpers + - ACPI: battery: Add synchronization between interface updates + - arm64: dts: qcom: msm8916: Add missing MDSS reset + - arm64: dts: qcom: msm8939: Add missing MDSS reset + - arm64: dts: qcom: sdm845: Fix slimbam num-channels/ees + - Revert "UBUNTU: SAUCE: arm64: dts: qcom: x1e80100-pmics: Disable pm8010 + by default" + - arm64: dts: qcom: x1e80100-pmics: Disable pm8010 by default + - arm64: dts: ti: k3-am62a-main: Fix main padcfg length + - arm64: dts: ti: k3-am62p: Fix supported hardware for 1GHz OPP + - arm64: kprobes: call set_memory_rox() for kprobe page + - arm64: mte: Do not flag the zero page as PG_mte_tagged + - ARM: AM33xx: Implement TI advisory 1.0.36 (EMU0/EMU1 pins state on + reset) + - ARM: OMAP2+: pm33xx-core: ix device node reference leaks in + amx3_idle_init + - firmware: arm_scmi: quirk: Prevent writes to string constants + - perf/arm-cmn: Fix CMN S3 DTM offset + - KVM: s390: Fix to clear PTE when discarding a swapped page + - KVM: arm64: Fix debug checking for np-guests using huge mappings + - KVM: arm64: Fix page leak in user_mem_abort() + - x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP + - KVM: SVM: Re-load current, not host, TSC_AUX on #VMEXIT from SEV-ES + guest + - KVM: TDX: Fix uninitialized error code for __tdx_bringup() + - dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non- + required + - xen: take system_transition_mutex on suspend + - xen/events: Cleanup find_virq() return codes + - xen/manage: Fix suspend error path + - xen/events: Return -EEXIST for bound VIRQs + - xen/events: Update virq_to_irq on migration + - firmware: exynos-acpm: fix PMIC returned errno + - firmware: meson_sm: fix device leak at probe + - media: cec: extron-da-hd-4k-plus: drop external-module make commands + - media: cx18: Add missing check after DMA map + - media: i2c: mt9p031: fix mbus code initialization + - media: i2c: mt9v111: fix incorrect type for ret + - media: mc: Fix MUST_CONNECT handling for pads with no links + - media: pci: ivtv: Add missing check after DMA map + - media: pci: mg4b: fix uninitialized iio scan data + - media: platform: mtk-mdp3: Add missing MT8188 compatible to comp_dt_ids + - media: s5p-mfc: remove an unused/uninitialized variable + - media: staging/ipu7: fix isys device runtime PM usage in firmware + closing + - media: uvcvideo: Avoid variable shadowing in uvc_ctrl_cleanup_fh + - media: venus: firmware: Use correct reset sequence for IRIS2 + - media: venus: pm_helpers: add fallback for the opp-table + - media: vivid: fix disappearing messages + - media: vsp1: Export missing vsp1_isp_free_buffer symbol + - media: ti: j721e-csi2rx: Use devm_of_platform_populate + - media: ti: j721e-csi2rx: Fix source subdev link creation + - media: lirc: Fix error handling in lirc_register() + - drm/exynos: exynos7_drm_decon: remove ctx->suspended + - drm/panthor: Fix memory leak in panthor_ioctl_group_create() + - drm/msm/a6xx: Fix PDC sleep sequence + - drm/rcar-du: dsi: Fix 1/2/3 lane support + - drm/nouveau: fix bad ret code in nouveau_bo_move_prep + - drm/xe/uapi: loosen used tracking restriction + - drm/amd/display: Incorrect Mirror Cositing + - drm/amd/display: Enable Dynamic DTBCLK Switch + - drm/amd/display: Fix unsafe uses of kernel mode FPU + - blk-crypto: fix missing blktrace bio split events + - btrfs: avoid potential out-of-bounds in btrfs_encode_fh() + - bus: mhi: ep: Fix chained transfer handling in read path + - bus: mhi: host: Do not use uninitialized 'dev' pointer in + mhi_init_irq_setup() + - cdx: Fix device node reference leak in cdx_msi_domain_init + - clk: qcom: tcsrcc-x1e80100: Set the bi_tcxo as parent to eDP refclk + - clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes + - clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths + - clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks + - copy_sighand: Handle architectures where sizeof(unsigned long) < + sizeof(u64) + - cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay + - cpufreq: intel_pstate: Fix object lifecycle issue in + update_qos_request() + - crypto: aspeed - Fix dma_unmap_sg() direction + - crypto: atmel - Fix dma_unmap_sg() direction + - crypto: rockchip - Fix dma_unmap_sg() nents value + - eventpoll: Replace rwlock with spinlock + - fbdev: Fix logic error in "offb" name match + - fs/ntfs3: Fix a resource leak bug in wnd_extend() + - fs: quota: create dedicated workqueue for quota_release_work + - fsnotify: pass correct offset to fsnotify_mmap_perm() + - fuse: fix possibly missing fuse_copy_finish() call in fuse_notify() + - fuse: fix livelock in synchronous file put from fuseblk workers + - gpio: mpfs: fix setting gpio direction to output + - i3c: Fix default I2C adapter timeout value + - iio/adc/pac1934: fix channel disable configuration + - iio: dac: ad5360: use int type to store negative error codes + - iio: dac: ad5421: use int type to store negative error codes + - iio: frequency: adf4350: Fix prescaler usage. + - iio: xilinx-ams: Fix AMS_ALARM_THR_DIRECT_MASK + - iio: xilinx-ams: Unmask interrupts after updating alarms + - init: handle bootloader identifier in kernel parameters + - iio: imu: inv_icm42600: Simplify pm_runtime setup + - iio: imu: inv_icm42600: Drop redundant pm_runtime reinitialization in + resume + - iio: imu: inv_icm42600: Avoid configuring if already pm_runtime + suspended + - iommu/vt-d: PRS isn't usable if PDS isn't supported + - ipmi: Rework user message limit handling + - ipmi:msghandler:Change seq_lock to a mutex + - kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in + sys_prlimit64() paths + - KEYS: trusted_tpm1: Compare HMAC values in constant time + - kho: only fill kimage if KHO is finalized + - lib/genalloc: fix device leak in of_gen_pool_get() + - loop: fix backing file reference leak on validation error + - md: fix mssing blktrace bio split events + - of: unittest: Fix device reference count leak in + of_unittest_pci_node_verify + - openat2: don't trigger automounts with RESOLVE_NO_XDEV + - padata: Reset next CPU when reorder sequence wraps around + - parisc: don't reference obsolete termio struct for TC* constants + - parisc: Remove spurious if statement from raw_copy_from_user() + - nvme-pci: Add TUXEDO IBS Gen8 to Samsung sleep quirk + - pinctrl: samsung: Drop unused S3C24xx driver data + - PM: EM: Fix late boot with holes in CPU topology + - PM: hibernate: Fix hybrid-sleep + - PM: hibernate: Restrict GFP mask in power_down() + - power: supply: max77976_charger: fix constant current reporting + - powerpc/powernv/pci: Fix underflow and leak issue + - powerpc/pseries/msi: Fix potential underflow and leak issue + - pwm: berlin: Fix wrong register in suspend/resume + - pwm: Fix incorrect variable used in error message + - Revert "ipmi: fix msg stack when IPMI is disconnected" + - sched/deadline: Fix race in push_dl_task() + - scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() + - scsi: sd: Fix build warning in sd_revalidate_disk() + - sctp: Fix MAC comparison to be constant-time + - smb client: fix bug with newly created file in cached dir + - sparc64: fix hugetlb for sun4u + - sparc: fix error handling in scan_one_device() + - xtensa: simdisk: add input size check in proc_write_simdisk + - xsk: Harden userspace-supplied xdp_desc validation + - mtd: rawnand: fsmc: Default to autodetect buswidth + - mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N + - mmc: core: SPI mode remove cmd7 + - mmc: mmc_spi: multiple block read remove read crc ack + - memory: samsung: exynos-srom: Fix of_iomap leak in exynos_srom_probe + - memory: stm32_omm: Fix req2ack update test + - rtc: interface: Ensure alarm irq is enabled when UIE is enabled + - rtc: interface: Fix long-standing race when setting alarm + - rseq/selftests: Use weak symbol reference, not definition, to link with + glibc + - PCI: xilinx-nwl: Fix ECAM programming + - PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock + - PCI/sysfs: Ensure devices are powered for config reads + - PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV + - PCI/ERR: Fix uevent on failure to recover + - PCI/AER: Fix missing uevent on recovery when a reset is requested + - PCI/AER: Support errors introduced by PCIe r6.0 + - PCI: Ensure relaxed tail alignment does not increase min_align + - PCI: Fix failure detection during resource resize + - PCI: j721e: Fix module autoloading + - PCI: j721e: Fix programming sequence of "strap" settings + - PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on + exit + - PCI: rcar-gen4: Fix PHY initialization + - PCI: rcar-host: Drop PMSR spinlock + - PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock + - PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq() + - PCI: tegra194: Handle errors in BPMP response + - PCI: tegra194: Reset BARs when running in PCIe endpoint mode + - PCI/pwrctrl: Fix device leak at registration + - PCI/pwrctrl: Fix device and OF node leak at bus scan + - PCI/pwrctrl: Fix device leak at device stop + - spi: cadence-quadspi: Flush posted register writes before INDAC access + - spi: cadence-quadspi: Flush posted register writes before DAC access + - spi: cadence-quadspi: Fix cqspi_setup_flash() + - xfs: use deferred intent items for reaping crosslinked blocks + - x86/fred: Remove ENDBR64 from FRED entry points + - x86/umip: Check that the instruction opcode is at least two bytes + - x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT + aliases) + - mptcp: pm: in-kernel: usable client side with C-flag + - mptcp: reset blackhole on success with non-loopback ifaces + - selftests: mptcp: join: validate C-flag + def limit + - s390/cio/ioasm: Fix __xsch() condition code handling + - s390/dasd: enforce dma_alignment to ensure proper buffer validation + - s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request + - s390: Add -Wno-pointer-sign to KBUILD_CFLAGS_DECOMPRESSOR + - slab: prevent warnings when slab obj_exts vector allocation fails + - slab: mark slab->obj_exts allocation failures unconditionally + - wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again + - wifi: iwlwifi: Fix dentry reference leak in iwl_mld_add_link_debugfs + - wifi: rtw89: avoid possible TX wait initialization race + - wifi: mt76: mt7925u: Add VID/PID for Netgear A9000 + - wifi: mt76: mt7921u: Add VID/PID for Netgear A7500 + - mm/thp: fix MTE tag mismatch when replacing zero-filled subpages + - mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled + mTHP subpage to shared zeropage + - mm/page_alloc: only set ALLOC_HIGHATOMIC for __GPF_HIGH allocations + - mm/hugetlb: early exit from hugetlb_pages_alloc_boot() when + max_huge_pages=0 + - mm/damon/vaddr: do not repeat pte_offset_map_lock() until success + - mm/damon/lru_sort: use param_ctx for damon_attrs staging + - nfsd: decouple the xprtsec policy check from check_nfsd_access() + - NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul() + - nfsd: nfserr_jukebox in nlm_fopen should lead to a retry + - media: iris: Call correct power off callback in cleanup path + - media: iris: Fix firmware reference leak and unmap memory after load + - media: iris: fix module removal if firmware download failed + - media: iris: vpu3x: Add MNoC low power handshake during hardware power- + off + - media: iris: Fix port streaming handling + - media: iris: Fix buffer count reporting in internal buffer check + - media: iris: Allow substate transition to load resources during output + streaming + - media: iris: Always destroy internal buffers on firmware release + response + - media: iris: Simplify session stop logic by relying on vb2 checks + - media: iris: Update vbuf flags before v4l2_m2m_buf_done + - media: iris: Send dummy buffer address for all codecs during drain + - media: iris: Fix missing LAST flag handling during drain + - media: iris: Fix format check for CAPTURE plane in try_fmt + - media: iris: Allow stop on firmware only if start was issued. + - ext4: add ext4_sb_bread_nofail() helper function for + ext4_free_branches() + - ext4: fail unaligned direct IO write with EINVAL + - ext4: verify orphan file size is not too big + - ext4: increase i_disksize to offset + len in + ext4_update_disksize_before_punch() + - ext4: correctly handle queries for metadata mappings + - ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() + - ext4: fix an off-by-one issue during moving extents + - ext4: guard against EA inode refcount underflow in xattr update + - ext4: validate ea_ino and size in check_xattrs + - ACPICA: Allow to skip Global Lock initialization + - ext4: free orphan info with kvfree + - ipmi: Fix handling of messages with provided receive message pointer + - Squashfs: add additional inode sanity checking + - Squashfs: reject negative file sizes in squashfs_read_inode() + - mm/ksm: fix incorrect KSM counter handling in mm_struct during fork + - media: mc: Clear minor number before put device + - arm64: dts: qcom: qcs615: add missing dt property in QUP SEs + - ACPI: property: Disregard references in data-only subnode lists + - ACPI: property: Add code comments explaining what is going on + - ACPI: property: Do not pass NULL handles to acpi_attach_data() + - irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume + - copy_file_range: limit size if in compat mode + - minixfs: Verify inode mode when loading from disk + - pid: Add a judgment for ns null in pid_nr_ns + - fs: Add 'initramfs_options' to set initramfs mount options + - cramfs: Verify inode mode when loading from disk + - nsfs: validate extensible ioctls + - mnt_ns_tree_remove(): DTRT if mnt_ns had never been added to mnt_ns_list + - writeback: Avoid softlockup when switching many inodes + - writeback: Avoid excessively long inode switching times + - iomap: error out on file IO when there is no inline_data buffer + - pidfs: validate extensible ioctls + - mount: handle NULL values in mnt_ns_release() + - Linux 6.17.4 + + * Questing update: v6.17.4 upstream stable release (LP: #2131259) // Race + condition in perf build causes build failure due to missing unistd_64.h + header on arm64 (LP: #2131702) + - perf tools: Fix arm64 libjvmti build by generating unistd_64.h + + * Questing update: v6.17.3 upstream stable release (LP: #2129610) + - arch: copy_thread: pass clone_flags as u64 + - filelock: add FL_RECLAIM to show_fl_flags() macro + - init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD + - pid: use ns_capable_noaudit() when determining net sysctl permissions + - Fix CC_HAS_ASM_GOTO_OUTPUT on non-x86 architectures + - [Config]: Update CC configs for v6.17.3 + - seccomp: Fix a race with WAIT_KILLABLE_RECV if the tracer replies too + fast + - kbuild: Add missing $(objtree) prefix to powerpc crtsavres.o artifact + - selftests: arm64: Check fread return value in exec_target + - selftests: arm64: Fix -Waddress warning in tpidr2 test + - kselftest/arm64/gcs: Correctly check return value when disabling GCS + - hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc() + - gfs2: Fix GLF_INVALIDATE_IN_PROGRESS flag clearing in do_xmote + - gfs2: Remove space before newline + - gfs2: Further sanitize lock_dlm.c + - gfs2: Fix LM_FLAG_TRY* logic in add_to_queue + - gfs2: Remove duplicate check in do_xmote + - gfs2: Get rid of GLF_INVALIDATE_IN_PROGRESS + - gfs2: do_xmote cleanup + - gfs2: Add proper lockspace locking + - powerpc/8xx: Remove left-over instruction and comments in + DataStoreTLBMiss handler + - powerpc/603: Really copy kernel PGD entries into all PGDIRs + - powerpc/ftrace: ensure ftrace record ops are always set for NOPs + - powerpc64/modules: correctly iterate over stubs in + setup_ftrace_ool_stubs + - uprobes: uprobe_warn should use passed task + - raid6: riscv: Clean up unused header file inclusion + - coresight: trbe: Prevent overflow in PERF_IDX2OFF() + - perf: arm_spe: Prevent overflow in PERF_IDX2OFF() + - erofs: avoid reading more for fragment maps + - smb: client: fix sending the iwrap custom IRD/ORD negotiation messages + - smb: server: fix IRD/ORD negotiation with the client + - perf/x86/intel: Use early_initcall() to hook bts_init() + - perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error + - x86/vdso: Fix output operand size of RDPID + - selftests: cgroup: Make test_pids backwards compatible + - sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask() + - [Config]: Update CONFIG_SCHED_MC for v6.17.3 + - lsm: CONFIG_LSM can depend on CONFIG_SECURITY + - cpuset: fix failure to enable isolated partition when containing + isolcpus + - btrfs: return any hit error from extent_writepage_io() + - btrfs: fix symbolic link reading when bs > ps + - pinctrl: renesas: rzg2l: Fix invalid unsigned return in rzg3s_oen_read() + - arm64: dts: renesas: rzg2lc-smarc: Disable CAN-FD channel0 + - bpf: Tidy verifier bug message + - regmap: Remove superfluous check for !config in __regmap_init() + - selftests/bpf: Copy test_kmods when installing selftest + - rust: cpumask: Mark CpumaskVar as transparent + - bpf/selftests: Fix test_tcpnotify_user + - bpf: Remove migrate_disable in kprobe_multi_link_prog_run + - libbpf: Fix reuse of DEVMAP + - tools/nolibc: fix error return value of clock_nanosleep() + - ARM: dts: renesas: porter: Fix CAN pin group + - leds: max77705: Function return instead of variable assignment + - leds: flash: leds-qcom-flash: Update torch current clamp setting + - s390/bpf: Do not write tail call counter into helper and kfunc frames + - s390/bpf: Write back tail call counter for BPF_PSEUDO_CALL + - s390/bpf: Write back tail call counter for BPF_TRAMP_F_CALL_ORIG + - cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus() + - arm64: dts: renesas: sparrow-hawk: Invert microSD voltage selector on + EVTB1 + - arm64: dts: renesas: sparrow-hawk: Set VDDQ18_25_AVB voltage on EVTB1 + - libbpf: Export bpf_object__prepare symbol + - firmware: arm_scmi: Mark VirtIO ready before registering + scmi_virtio_driver + - arm64: dts: imx93-kontron: Fix GPIO for panel regulator + - arm64: dts: imx93-kontron: Fix USB port assignment + - arm64: dts: imx95: Correct the lpuart7 and lpuart8 srcid + - bpf: Remove preempt_disable in bpf_try_get_buffers + - ACPI: processor: idle: Fix memory leak when register cpuidle device + failed + - genirq: Add irq_chip_(startup/shutdown)_parent() + - PCI/MSI: Add startup/shutdown for per device domains + - irqchip/sg2042-msi: Fix broken affinity setting + - scripts/misc-check: update export checks for EXPORT_SYMBOL_FOR_MODULES() + - soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS + - pinctrl: meson-gxl: add missing i2c_d pinmux + - blk-mq: check kobject state_in_sysfs before deleting in + blk_mq_unregister_hctx + - selftests/futex: Remove the -g parameter from futex_priv_hash + - ARM: at91: pm: fix MCKx restore routine + - arm64: dts: apple: t8103-j457: Fix PCIe ethernet iommu-map + - regulator: scmi: Use int type to store negative error codes + - selftests/futex: Fix some futex_numa_mpol subtests + - tools/nolibc: avoid error in dup2() if old fd equals new fd + - selftests/nolibc: fix EXPECT_NZ macro + - leds: leds-lp55xx: Use correct address for memory programming + - PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in + cond_[startup|shutdown]_parent() + - block: use int to store blk_stack_limits() return value + - ARM: dts: stm32: stm32mp151c-plyaqm: Use correct dai-format property + - dt-bindings: vendor-prefixes: Add undocumented vendor prefixes + - genirq/test: Fix depth tests on architectures with NOREQUEST by default. + - genirq/test: Select IRQ_DOMAIN + - genirq/test: Depend on SPARSE_IRQ + - genirq/test: Drop CONFIG_GENERIC_IRQ_MIGRATION assumptions + - genirq/test: Ensure CPU 1 is online for hotplug test + - selftests/bpf: Fix count write in testapp_xdp_metadata_copy() + - vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY + - PM: sleep: core: Clear power.must_resume in noirq suspend error path + - blk-mq: fix elevator depth_updated method + - vdso: Add struct __kernel_old_timeval forward declaration to gettime.h + - ARM: dts: ti: omap: am335x-baltos: Fix ti,en-ck32k-xtal property in DTS + to use correct boolean syntax + - ARM: dts: ti: omap: omap3-devkit8000-lcd: Fix ti,keep-vref-on property + to use correct boolean syntax in DTS + - ARM: dts: omap: am335x-cm-t335: Remove unused mcasp num-serializer + property + - PM / devfreq: mtk-cci: Fix potential error pointer dereference in + probe() + - power: supply: cw2015: Fix a alignment coding style issue + - hwmon: (asus-ec-sensors) Narrow lock for X870E-CREATOR WIFI + - pinctrl: renesas: Use int type to store negative error codes + - pinctrl: eswin: Fix regulator error check and Kconfig dependency + - null_blk: Fix the description of the cache_size module argument + - blk-throttle: fix access race during throttle policy activation + - selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper + - selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing + vDSO + - irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup + path + - irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc() + - tick: Do not set device to detached state in tick_shutdown() + - arm64: dts: mediatek: mt8195: Remove suspend-breaking reset from pcie0 + - arm64: dts: mediatek: mt8183: Fix out of range pull values + - nbd: restrict sockets to TCP and UDP + - PM / devfreq: rockchip-dfi: double count on RK3588 + - firmware: firmware: meson-sm: fix compile-test default + - dts: arm: amlogic: fix pwm node for c3 + - soc: mediatek: mtk-svs: fix device leaks on mt8183 probe failure + - soc: mediatek: mtk-svs: fix device leaks on mt8192 probe failure + - cpuidle: qcom-spm: fix device and OF node leaks at probe + - block: cleanup bio_issue + - block: initialize bio issue time in blk_mq_submit_bio() + - block: factor out a helper bio_submit_split_bioset() + - block: skip unnecessary checks for split bio + - block: fix ordering of recursive split IO + - blk-mq: remove useless checkings in blk_mq_update_nr_requests() + - blk-mq: check invalid nr_requests in queue_requests_store() + - blk-mq: convert to serialize updating nr_requests with + update_nr_hwq_lock + - blk-mq: cleanup shared tags case in blk_mq_update_nr_requests() + - blk-mq: split bitmap grow and resize case in blk_mq_update_nr_requests() + - blk-mq-sched: add new parameter nr_requests in blk_mq_alloc_sched_tags() + - blk-mq: fix potential deadlock while nr_requests grown + - arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting + - arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting + - arm64: dts: rockchip: Add RTC on rk3576-evb1-v10 + - arm64: dts: rockchip: Add WiFi on rk3576-evb1-v10 + - arm64: dts: rockchip: Fix network on rk3576 evb1 board + - arm64: dts: ti: k3-j742s2-mcu-wakeup: Override firmware-name for MCU R5F + cores + - arm64: dts: ti: k3: Rename rproc reserved-mem nodes to 'memory@addr' + - Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout + locations" + - Revert "arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x + carveout locations" + - arm64: dts: mediatek: mt8188: Change efuse fallback compatible to mt8186 + - arm64: dts: mediatek: mt8186-tentacruel: Fix touchscreen model + - arm64: dts: ti: k3-pinctrl: Fix the bug in existing macros + - arm64: dts: renesas: r9a09g047e57-smarc: Fix gpio key's pin control node + - arm64: dts: mediatek: mt6331: Fix pmic, regulators, rtc, keys node names + - mmc: core: Fix variable shadowing in mmc_route_rpmb_frames() + - arm64: dts: mediatek: mt6795-xperia-m5: Fix mmc0 latch-ck value + - arm64: dts: mediatek: mt7986a: Fix PCI-Express T-PHY node address + - arm64: dts: mediatek: mt8395-kontron-i1200: Fix MT6360 regulator nodes + - arm64: dts: mediatek: mt8516-pumpkin: Fix machine compatible + - arm64: dts: allwinner: a527: cubie-a5e: Add LEDs + - arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal + - arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal + - arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal + - pwm: tiehrpwm: Don't drop runtime PM reference in .free() + - pwm: tiehrpwm: Make code comment in .free() more useful + - pwm: tiehrpwm: Fix various off-by-one errors in duty-cycle calculation + - pwm: tiehrpwm: Fix corner case in clock divisor calculation + - ACPICA: Apply ACPI_NONSTRING + - ACPICA: Fix largest possible resource descriptor index + - riscv, bpf: Sign extend struct ops return values properly + - nvme-auth: update bi_directional flag + - nvmet-fc: move lsop put work to nvmet_fc_ls_req_op + - nvmet-fcloop: call done callback even when remote port is gone + - nvme-tcp: send only permitted commands for secure concat + - i3c: master: svc: Use manual response for IBI events + - i3c: master: svc: Recycle unused IBI slot + - block: update validation of atomic writes boundary for stacked devices + - block: fix stacking of atomic writes when atomics are not supported + - selftests: watchdog: skip ping loop if WDIOF_KEEPALIVEPING not supported + - selftests/kselftest_harness: Add harness-selftest.expected to TEST_FILES + - blk-throttle: fix throtl_data leak during disk release + - bpf: Explicitly check accesses to bpf_sock_addr + - mmc: select REGMAP_MMIO with MMC_LOONGSON2 + - selftests/futex: Fix futex_wait() for 32bit ARM + - selftest/futex: Make the error check more precise for futex_numa_mpol + - selftest/futex: Compile also with libnuma < 2.0.16 + - bpf: dont report verifier bug for missing bpf_scc_visit on speculative + path + - bpf, arm64: Call bpf_jit_binary_pack_finalize() in bpf_jit_free() + - arm64: dts: apple: t600x: Add missing WiFi properties + - arm64: dts: apple: t600x: Add bluetooth device nodes + - arm64: dts: apple: Add ethernet0 alias for J375 template + - selftests: always install UAPI headers to the correct directory + - smp: Fix up and expand the smp_call_function_many() kerneldoc + - mfd: max77705: max77705_charger: move active discharge setting to mfd + parent + - power: supply: max77705_charger: refactoring: rename charger to chg + - power: supply: max77705_charger: use regfields for config registers + - power: supply: max77705_charger: rework interrupts + - tools/nolibc: make time_t robust if __kernel_old_time_t is missing in + host headers + - spi: fix return code when spi device has too many chipselects + - clocksource/drivers/timer-tegra186: Avoid 64-bit divide operation + - clocksource/drivers/tegra186: Avoid 64-bit division + - bpf: Mark kfuncs as __noclone + - once: fix race by moving DO_ONCE to separate section + - hwmon: (mlxreg-fan) Separate methods of fan setting coming from + different subsystems + - tools/nolibc: add stdbool.h to nolibc includes + - thermal/drivers/qcom: Make LMH select QCOM_SCM + - thermal/drivers/qcom/lmh: Add missing IRQ includes + - i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD + - i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails + - i2c: spacemit: remove stop function to avoid bus error + - i2c: spacemit: disable SDA glitch fix to avoid restart delay + - i2c: spacemit: check SDA instead of SCL after bus reset + - i2c: spacemit: ensure SDA is released after bus reset + - i2c: designware: Fix clock issue when PM is disabled + - i2c: designware: Add disabling clocks when probe fails + - libbpf: Fix error when st-prefix_ops and ops from differ btf + - bpf: Enforce expected_attach_type for tailcall compatibility + - i3c: fix big-endian FIFO transfers + - mfd: max77705: Setup the core driver as an interrupt controller + - drm/sched: Fix a race in DRM_GPU_SCHED_STAT_NO_HANG test + - drm/panel-edp: Add disable to 100ms for MNB601LS1-4 + - drm/display: bridge-connector: correct CEC bridge pointers in + drm_bridge_connector_init + - drm/panel-edp: Add 50ms disable delay for four panels + - drm/vmwgfx: fix missing assignment to ts + - drm/amd/display: Reduce Stack Usage by moving 'audio_output' into + 'stream_res' v4 + - drm/panel: novatek-nt35560: Fix invalid return value + - drm/amdgpu: fix link error for !PM_SLEEP + - drm/amdgpu: Fix jpeg v4.0.3 poison irq call trace on sriov guest + - drm/amdgpu: Fix vcn v4.0.3 poison irq call trace on sriov guest + - PCI: endpoint: pci-ep-msi: Fix NULL vs IS_ERR() check in + pci_epf_write_msi_msg() + - PCI: xgene-msi: Return negative -EINVAL in xgene_msi_handler_setup() + - drm/radeon/r600_cs: clean up of dead code in r600_cs + - f2fs: fix condition in __allow_reserved_blocks() + - f2fs: fix to avoid overflow while left shift operation + - f2fs: fix to zero data after EOF for compressed file correctly + - drm/bridge: it6505: select REGMAP_I2C + - wifi: rtw88: Lock rtwdev->mutex before setting the LED + - HID: steelseries: refactor probe() and remove() + - media: zoran: Remove zoran_fh structure + - phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568 + - drm/bridge: cdns-dsi: Fix the _atomic_check() + - usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup + - usb: misc: qcom_eud: Access EUD_MODE_MANAGER2 through secure calls + - PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure + - misc: pci_endpoint_test: Fix array underflow in + pci_endpoint_test_ioctl() + - serial: max310x: Add error checking in probe() + - drm/amd/display: Remove redundant semicolons + - drm/amd/display: Add NULL pointer checks in dc_stream cursor attribute + functions + - crypto: keembay - Add missing check after sg_nents_for_len() + - hwrng: nomadik - add ARM_AMBA dependency + - docs: iio: ad3552r: Fix malformed code-block directive + - fwctl/mlx5: Fix memory alloc/free in mlx5ctl_fw_rpc() + - scsi: pm80xx: Restore support for expanders + - scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod + - scsi: libsas: Add dev_parent_is_expander() helper + - scsi: pm80xx: Use dev_parent_is_expander() helper + - scsi: pm80xx: Add helper function to get the local phy id + - scsi: pm80xx: Fix pm8001_abort_task() for chip_8006 when using an + expander + - mptcp: Fix up subflow's memcg when CONFIG_SOCK_CGROUP_DATA=n. + - scsi: myrs: Fix dma_alloc_coherent() error check + - f2fs: fix to clear unusable_cap for checkpoint=enable + - f2fs: fix to avoid NULL pointer dereference in + f2fs_check_quota_consistency() + - f2fs: fix to allow removing qf_name + - Revert "UBUNTU: SAUCE: drm/dp: drm_edp_backlight_set_level: do not + always send 3-byte commands" + - drm/dp: drm_edp_backlight_set_level: do not always send 3-byte commands + - crypto: octeontx2 - Call strscpy() with correct size argument + - drm: re-allow no-op changes on non-primary planes in async flips + - media: rj54n1cb0c: Fix memleak in rj54n1_probe() + - media: staging/ipu7: convert to use pci_alloc_irq_vectors() API + - media: staging/ipu7: Don't set name for IPU7 PCI device + - media: staging/ipu7: cleanup the MMU correctly in IPU7 driver release + - media: i2c: vd55g1: Fix duster register address + - drm/panel: Allow powering on panel follower after panel is enabled + - HID: i2c-hid: Make elan touch controllers power on after panel is + enabled + - RDMA/mlx5: Better estimate max_qp_wr to reflect WQE count + - RDMA/mlx5: Fix vport loopback forcing for MPV device + - wifi: rtw88: Use led->brightness_set_blocking for PCI too + - net: phy: introduce phy_id_compare_vendor() PHY ID helper + - net: phy: as21xxx: better handle PHY HW reset on soft-reboot + - PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() + - fuse: remove unneeded offset assignment when filling write pages + - PCI: qcom: Restrict port parsing only to PCIe bridge child nodes + - cdx: don't select CONFIG_GENERIC_MSI_IRQ + - PCI/ACPI: Fix pci_acpi_preserve_config() memory leak + - HID: i2c-hid: Fix test in i2c_hid_core_register_panel_follower() + - ALSA: lx_core: use int type to store negative error codes + - media: st-delta: avoid excessive stack usage + - drm/amdgpu/vcn: Add regdump helper functions + - drm/amdgpu/vcn: Hold pg_lock before vcn power off + - drm/amdgpu: Check vcn state before profile switch + - accel/amdxdna: Use int instead of u32 to store error codes + - efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text + - net: dst: introduce dst->dev_rcu + - ipv6: mcast: Add ip6_mc_find_idev() helper + - ipv6: start using dst_dev_rcu() + - ipv6: use RCU in ip6_xmit() + - ipv6: use RCU in ip6_output() + - net: use dst_dev_rcu() in sk_setup_caps() + - tcp_metrics: use dst_dev_net_rcu() + - ipv4: start using dst_dev_rcu() + - crypto: hisilicon/zip - remove unnecessary validation for high- + performance mode configurations + - crypto: hisilicon - re-enable address prefetch after device resuming + - crypto: hisilicon - check the sva module status while enabling or + disabling address prefetch + - crypto: hisilicon/qm - check whether the input function and PF are on + the same device + - crypto: hisilicon/qm - request reserved interrupt for virtual function + - inet: ping: check sock_net() in ping_get_port() and ping_lookup() + - dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation + - coresight: trbe: Add ISB after TRBLIMITR write + - coresight: Fix missing include for FIELD_GET + - coresight: Only register perf symlink for sinks with alloc_buffer + - drm/amdgpu: Power up UVD 3 for FW validation (v2) + - drm/amd/pm: Disable ULV even if unsupported (v3) + - drm/amd/pm: Fix si_upload_smc_data (v3) + - drm/amd/pm: Adjust si_upload_smc_data register programming (v3) + - drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3) + - drm/amd/pm: Disable MCLK switching with non-DC at 120 Hz+ (v2) + - drm/amd/pm: Disable SCLK switching on Oland with high pixel clocks (v3) + - wifi: mac80211: Make CONNECTION_MONITOR optional for MLO sta + - wifi: mwifiex: send world regulatory domain to driver + - wifi: brcmfmac: fix 43752 SDIO FWVID incorrectly labelled as Cypress + (CYW) + - drm/msm: Do not validate SSPP when it is not ready + - PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation + - wifi: mac80211: consider links for validating SCAN_FLAG_AP in scan + request during MLO + - PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s + - tcp: fix __tcp_close() to only send RST when required + - fanotify: Validate the return value of mnt_ns_from_dentry() before + dereferencing + - drm/amdkfd: Fix error code sign for EINVAL in svm_ioctl() + - usb: phy: twl6030: Fix incorrect type for ret + - usb: gadget: configfs: Correctly set use_os_string at bind + - tty: n_gsm: Don't block input queue by waiting MSC + - misc: genwqe: Fix incorrect cmd field being reported in error + - pps: fix warning in pps_register_cdev when register device fail + - drm/msm: Fix obj leak in VM_BIND error path + - drm/msm: Fix missing VM_BIND offset/range validation + - wifi: iwlwifi: Remove redundant header files + - drm/msm/mdp4: stop supporting no-IOMMU configuration + - drm/msm: stop supporting no-IOMMU configuration + - idpf: fix Rx descriptor ready check barrier in splitq + - ASoC: Intel: bytcht_es8316: Fix invalid quirk input mapping + - ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mapping + - ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping + - ipv6: snmp: do not use SNMP_MIB_SENTINEL anymore + - ipv6: snmp: do not track per idev ICMP6_MIB_RATELIMITHOST + - drm/msm: Fix bootup splat with separate_gpu_drm modparam + - drm/msm/dpu: fix incorrect type for ret + - wifi: mac80211: fix reporting of all valid links in sta_set_sinfo() + - fs: ntfs3: Fix integer overflow in run_unpack() + - fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist + - iio: consumers: Fix handling of negative channel scale in + iio_convert_raw_to_processed() + - iio: consumers: Fix offset handling in iio_convert_raw_to_processed() + - mm/slub: Fix cmp_loc_by_count() to return 0 when counts are equal + - tools: ynl: fix undefined variable name + - RDMA/mlx5: Fix page size bitmap calculation for KSM mode + - netfilter: ipset: Remove unused htable_bits in macro ahash_region + - ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable + - HID: steelseries: Fix STEELSERIES_SRWS1 handling in steelseries_remove() + - watchdog: intel_oc_wdt: Do not try to write into const memory + - watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the + watchdog + - PCI: endpoint: pci-epf-test: Fix doorbell test support + - drivers/base/node: handle error properly in register_one_node() + - RDMA/cm: Rate limit destroy CM ID timeout error message + - wifi: mt76: mt7996: Fix mt7996_mcu_sta_ba wcid configuration + - wifi: mt76: mt7996: Fix mt7996_mcu_bss_mld_tlv routine + - wifi: mt76: fix potential memory leak in mt76_wmac_probe() + - wifi: mt76: mt7996: Use proper link_id in link_sta_rc_update callback + - wifi: mt76: mt7996: Check phy before init msta_link in + mt7996_mac_sta_add_links() + - wifi: mt76: mt7996: Fix tx-queues initialization for second phy on + mt7996 + - wifi: mt76: mt7996: Fix RX packets configuration for primary WED device + - wifi: mt76: mt7996: Convert mt7996_wed_rro_addr to LE + - wifi: mt76: mt7915: fix mt7981 pre-calibration + - wifi: mt76: mt7996: remove redundant per-phy mac80211 calls during + restart + - ASoC: Intel: hda-sdw-bpt: set persistent_buffer false + - srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed() + - drm/amdgpu: Fix allocating extra dwords for rings (v2) + - f2fs: fix to update map->m_next_extent correctly in f2fs_map_blocks() + - f2fs: fix to truncate first page in error path of f2fs_truncate() + - f2fs: fix to avoid migrating empty section + - f2fs: fix to mitigate overhead of f2fs_zero_post_eof_page() + - RISC-V: KVM: Write hgatp register with valid mode bits + - ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on + PREEMPT_RT + - ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message + - scsi: qla2xxx: edif: Fix incorrect sign of error code + - scsi: qla2xxx: Fix incorrect sign of error code in START_SP_W_RETRIES() + - scsi: qla2xxx: Fix incorrect sign of error code in qla_nvme_xmt_ls_rsp() + - HID: hidraw: tighten ioctl command parsing + - f2fs: fix zero-sized extent for precache extents + - smc: Fix use-after-free in __pnet_find_base_ndev(). + - smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set(). + - smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match(). + - smc: Use __sk_dst_get() and dst_dev_rcu() in smc_vlan_by_tcpsk(). + - tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock(). + - mptcp: Call dst_release() in mptcp_active_enable(). + - mptcp: Use __sk_dst_get() and dst_dev_rcu() in mptcp_active_enable(). + - Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems + Running" + - RDMA/core: Resolve MAC of next-hop device without ARP support + - IB/sa: Fix sa_local_svc_timeout_ms read race + - Documentation: trace: historgram-design: Separate sched_waking histogram + section heading and the following diagram + - ASoC: SOF: ipc4-pcm: Fix incorrect comparison with number of tdm_slots + - wifi: ath12k: initialize eirp_power before use + - wifi: ath12k: fix overflow warning on num_pwr_levels + - wifi: ath12k: fix signal in radiotap for WCN7850 + - wifi: ath12k: fix HAL_PHYRX_COMMON_USER_INFO handling in monitor mode + - wifi: ath12k: fix the fetching of combined rssi + - wifi: ath12k: Add fallback for invalid channel number in PHY metadata + - wifi: ath12k: fix wrong logging ID used for CE + - wifi: ath10k: avoid unnecessary wait for service ready message + - iommu/vt-d: debugfs: Fix legacy mode page table dump logic + - wifi: mac80211: fix Rx packet handling when pubsta information is not + available + - ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback + - sparc: fix accurate exception reporting in copy_{from_to}_user for + UltraSPARC + - sparc: fix accurate exception reporting in copy_{from_to}_user for + UltraSPARC III + - sparc: fix accurate exception reporting in copy_{from_to}_user for + Niagara + - sparc: fix accurate exception reporting in copy_to_user for Niagara 4 + - sparc: fix accurate exception reporting in copy_{from,to}_user for M7 + - vfio/pds: replace bitmap_free with vfree + - crypto: comp - Use same definition of context alloc and free ops + - crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs + - wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() + - rpmsg: qcom_smd: Fix fallback to qcom,ipc parse + - remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974 + - RDMA/rxe: Fix race in do_task() when draining + - selftests/mm: fix va_high_addr_switch.sh failure on x86_64 + - wifi: rtw89: fix leak in rtw89_core_send_nullfunc() + - wifi: rtw89: avoid circular locking dependency in ser_state_run() + - PCI: tegra194: Fix duplicate PLL disable in + pex_ep_event_pex_rst_assert() + - remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice + - remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E + - wifi: ath12k: Refactor RX TID deletion handling into helper function + - wifi: ath12k: Fix flush cache failure during RX queue update + - wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid() + - dm vdo: return error on corrupted metadata in start_restoring_volume + functions + - coresight: fix indentation error in cscfg_remove_owned_csdev_configs() + - coresight-etm4x: Conditionally access register TRCEXTINSELR + - coresight: tmc: Support atclk + - coresight: catu: Support atclk + - coresight: etm4x: Support atclk + - coresight: Appropriately disable programming clocks + - coresight: Appropriately disable trace bus clocks + - coresight: Avoid enable programming clock duplicately + - coresight: trbe: Return NULL pointer for allocation failures + - coresight: tpda: fix the logic to setup the element size + - coresight: Fix incorrect handling for return value of devm_kzalloc + - NFSv4.1: fix backchannel max_resp_sz verification check + - net: ethtool: tsconfig: set command must provide a reply + - netfilter: nfnetlink: reset nlh pointer during batch replay + - netfilter: nf_conntrack: do not skip entries in /proc/net/nf_conntrack + - scsi: ufs: core: Fix data race in CPU latency PM QoS request handling + - scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() + - usb: vhci-hcd: Prevent suspending virtually attached devices + - PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion + - PCI: rcar-gen4: Assure reset occurs before DBI access + - PCI: rcar-gen4: Fix inverted break condition in PHY initialization + - ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075 + - iommu/vt-d: Disallow dirty tracking if incoherent page walk + - iommu/selftest: prevent use of uninitialized variable + - RDMA/siw: Always report immediate post SQ errors + - net: enetc: Fix probing error message typo for the ENETCv4 PF driver + - net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast + - ptp: Add a upper bound on max_vclocks + - vhost: vringh: Fix copy_to_iter return value check + - net: macb: remove illusion about TBQPH/RBQPH being per-queue + - net: macb: move ring size computation to functions + - net: macb: single dma_alloc_coherent() for DMA descriptors + - Bluetooth: btintel_pcie: Refactor Device Coredump + - Bluetooth: MGMT: Fix not exposing debug UUID on + MGMT_OP_READ_EXP_FEATURES_INFO + - Bluetooth: ISO: Fix possible UAF on iso_conn_free + - Bluetooth: ISO: free rx_skb if not consumed + - Bluetooth: ISO: don't leak skb in ISO_CONT RX + - Bluetooth: hci_sync: Fix using random address for BIG/PA advertisements + - KEYS: X.509: Fix Basic Constraints CA flag parsing + - hwrng: ks-sa - fix division by zero in ks_sa_rng_init + - cramfs: fix incorrect physical page address calculation + - ocfs2: fix double free in user_cluster_connect() + - drivers/base/node: fix double free in register_one_node() + - f2fs: fix UAF issue in f2fs_merge_page_bio() + - mtd: rawnand: atmel: Fix error handling path in + atmel_nand_controller_add_nands + - PCI: j721e: Fix incorrect error message in probe() + - idpf: fix mismatched free function for dma_alloc_coherent + - tcp: use skb->len instead of skb->truesize in tcp_can_ingest() + - nfp: fix RSS hash key size when RSS is not supported + - net: ena: return 0 in ena_get_rxfh_key_size() when RSS hash key is not + configurable + - net: dlink: handle copy_thresh allocation failure + - net/mlx5: Stop polling for command response if interface goes down + - net/mlx5: pagealloc: Fix reclaim race during command interface teardown + - net/mlx5: fw reset, add reset timeout work + - smb: client: fix crypto buffers in non-linear memory + - bonding: fix xfrm offload feature setup on active-backup mode + - net: enetc: initialize SW PIR and CIR based HW PIR and CIR values + - iommufd: Register iommufd mock devices with fwspec + - Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set" + - NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support + - nfs/localio: avoid issuing misaligned IO using O_DIRECT + - octeontx2-vf: fix bitmap leak + - octeontx2-pf: fix bitmap leak + - vhost: vringh: Modify the return value check + - selftests/bpf: Fix typos and grammar in test sources + - selftests/bpf: move get_ksyms and get_addrs to trace_helpers.c + - selftests/bpf: Fix realloc size in bpf_get_addrs + - bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer + - bpf: Reject negative offsets for ALU ops + - tpm: Disable TPM2_TCG_HMAC by default + - ALSA: hda/hdmi: Add pin fix for HP ProDesk model + - ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100 + - Squashfs: fix uninit-value in squashfs_get_parent + - uio_hv_generic: Let userspace take care of interrupt mask + - hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init + - io_uring/waitid: always prune wait queue entry in io_waitid_wait() + - io_uring/zcrx: fix overshooting recv limit + - ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data() + - ASoC: SOF: ipc3-topology: Fix multi-core and static pipelines tear down + - ASoC: codecs: wcd937x: set the comp soundwire port correctly + - ASoC: codecs: wcd937x: make stub functions inline + - ASoC: SOF: ipc4-pcm: fix delay calculation when DSP resamples + - ASoC: SOF: ipc4-pcm: fix start offset calculation for chain DMA + - fs: udf: fix OOB read in lengthAllocDescs handling + - net: nfc: nci: Add parameter validation for packet data + - mfd: rz-mtu3: Fix MTU5 NFCR register offset + - mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag + - mfd: vexpress-sysreg: Check the return value of devm_gpiochip_add_data() + - tracing: Fix lock imbalance in s_start() memory allocation failure path + - tracing: Fix race condition in kprobe initialization causing NULL + pointer dereference + - tracing: Fix wakeup tracers on failure of acquiring calltime + - tracing: Fix irqoff tracers on failure of acquiring calltime + - tracing: Have trace_marker use per-cpu data to read user space + - tracing: Fix tracing_mark_raw_write() to use buf and not ubuf + - tracing: Stop fortify-string from warning in tracing_mark_raw_write() + - dm: fix queue start/stop imbalance under suspend/load/resume races + - dm: fix NULL pointer dereference in __dm_suspend() + - LoongArch: Automatically disable kaslr if boot from kexec_file + - pwm: loongson: Fix LOONGSON_PWM_FREQ_DEFAULT + - LoongArch: BPF: Sign-extend struct ops return values properly + - LoongArch: BPF: No support of struct argument in trampoline programs + - LoongArch: BPF: Don't align trampoline size + - LoongArch: BPF: Make trampoline size stable + - LoongArch: BPF: Make error handling robust in + arch_prepare_bpf_trampoline() + - LoongArch: BPF: Remove duplicated bpf_flush_icache() + - LoongArch: BPF: No text_poke() for kernel text + - LoongArch: BPF: Remove duplicated flags check + - LoongArch: BPF: Fix uninitialized symbol 'retval_off' + - mm/ksm: fix flag-dropping behavior in ksm_madvise + - ksmbd: Fix race condition in RPC handle list access + - ksmbd: fix error code overwriting in smb2_get_info_filesystem() + - ksmbd: add max ip connections parameter + - ext4: fix potential null deref in ext4_mb_init() + - ext4: fix checks for orphan inodes + - KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't valid + - fbdev: simplefb: Fix use after free in simplefb_detach_genpds() + - mm: hugetlb: avoid soft lockup when mprotect to large memory area + - selftests/mm: skip soft-dirty tests when CONFIG_MEM_SOFT_DIRTY is + disabled + - nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe() + - misc: fastrpc: Save actual DMA size in fastrpc_map structure + - misc: fastrpc: Fix fastrpc_map_lookup operation + - misc: fastrpc: fix possible map leak in fastrpc_put_args + - misc: fastrpc: Skip reference for DMA handles + - Input: atmel_mxt_ts - allow reset GPIO to sleep + - Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info + leak + - sunrpc: fix null pointer dereference on zero-length checksum + - PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() + - remoteproc: pru: Fix potential NULL pointer dereference in + pru_rproc_set_ctable() + - PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before + release + - thunderbolt: Fix use-after-free in tb_dp_dprx_work + - tee: fix register_shm_helper() + - pinctrl: check the return value of pinmux_ops::get_function_name() + - bus: fsl-mc: Check return value of platform_get_resource() + - net/9p: Fix buffer overflow in USB transport layer + - net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock + - usb: typec: tipd: Clear interrupts first + - arm64: dts: qcom: qcm2290: Disable USB SS bus instances in park mode + - usb: cdns3: cdnsp-pci: remove redundant pci_disable_device() call + - scsi: ufs: core: Fix PM QoS mutex initialization + - drm/amdgpu/vcn: Fix double-free of vcn dump buffer + - Linux 6.17.3 + + * CVE-2025-40019 + - crypto: essiv - Check ssize for decryption and in-place encryption + + * CVE-2025-40214 + - af_unix: Initialise scc_index in unix_add_edge(). + + * Miscellaneous Ubuntu changes + - [SAUCE] Fix selftest/net/rtnetlink.sh for Big Endian + + -- Mehmet Basaran Fri, 09 Jan 2026 17:50:56 +0300 + +linux (6.17.0-8.8) questing; urgency=medium + + * questing/linux: 6.17.0-8.8 -proposed tracker (LP: #2131554) + + * crash when reading from /sys/kernel/tracing/rv/enabled_monitors + (LP: #2131136) + - rv: Fully convert enabled_monitors to use list_head as iterator + + * i40e driver is triggering VF resets on every link state change + (LP: #2130552) + - i40e: avoid redundant VF link state updates + + * kernel crash on bootup for some arm64 machines (LP: #2129770) + - KVM: arm64: Guard PMSCR_EL1 initialization with SPE presence check + + * CVE-2025-40018 + - ipvs: Defer ip_vs_ftp unregister during netns cleanup + + -- Manuel Diewald Fri, 14 Nov 2025 17:53:03 +0100 + +linux (6.17.0-7.7) questing; urgency=medium + + * questing/linux: 6.17.0-7.7 -proposed tracker (LP: #2128695) + + * Fix incorrect bug number for CONFIG_KERNEL_ZSTD (LP: #2127676) + - [Config] Fix bug note for CONFIG_KERNEL_ZSTD + + * support Panter Lake CPU performance preferences (LP: #2127187) + - thermal: intel: int340x: Add support for power slider + - thermal: intel: int340x: Enable power slider interface for Panther Lake + - thermal: intel: int340x: Add module parameter for balanced Slider + - thermal: intel: int340x: Add module parameter to change slider offset + - thermal: intel: int340x: Power Slider: Validate slider_balance range + + * [SRU][Q/P/N:hwe-6.14] mt7925: Add MBSS support (LP: #2119479) + - wifi: mt76: mt7925: add MBSSID support + + * Plucky preinstalled server fails to boot on rb3gen2 (LP: #2106681) // + Questing preinstalled server fails to boot on sa8775p boards + (LP: #2121347) + - [Config] move more qcom interconnect/pinctrl/gcc options to builtin + + * Packaging resync (LP: #1786013) + - [Packaging] update Ubuntu.md + + * r8169 can not wake on LAN via SFP moudule (LP: #2123901) + - r8169: set EEE speed down ratio to 1 + + * System hangs when running the memory stress test (LP: #2103680) + - mm: page_alloc: avoid kswapd thrashing due to NUMA restrictions + + * Questing update: v6.17.2 upstream stable release (LP: #2128209) + - drm/amdgpu: Enable MES lr_compute_wa by default + - USB: serial: option: add SIMCom 8230C compositions + - Bluetooth: btusb: Add USB ID 2001:332a for D-Link AX9U rev. A1 + - wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188 + - wifi: rtl8xxxu: Don't claim USB ID 07b8:8188 + - rust: drm: fix `srctree/` links + - rust: block: fix `srctree/` links + - rust: pci: fix incorrect platform reference in PCI driver probe doc + comment + - rust: pci: fix incorrect platform reference in PCI driver unbind doc + comment + - serial: qcom-geni: Fix blocked task + - nvmem: layouts: fix automatic module loading + - drivers/misc/amd-sbi/Kconfig: select REGMAP_I2C + - binder: fix double-free in dbitmap + - serial: stm32: allow selecting console when the driver is module + - [Config] stm32: do not select console when driver is module + - staging: axis-fifo: fix maximum TX packet length check + - staging: axis-fifo: fix TX handling on copy_from_user() failure + - staging: axis-fifo: flush RX FIFO on read errors + - driver core: faux: Set power.no_pm for faux devices + - driver core/PM: Set power.no_callbacks along with power.no_pm + - Revert "crypto: testmgr - desupport SHA-1 for FIPS 140" + - crypto: zstd - Fix compression bug caused by truncation + - crypto: rng - Ensure set_ent is always present + - net/9p: fix double req put in p9_fd_cancelled + - KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O + - f2fs: fix to do sanity check on node footer for non inode dnode + - ring buffer: Propagate __rb_map_vma return value to caller + - Linux 6.17.2 + + -- Edoardo Canepa Sat, 18 Oct 2025 08:01:45 +0200 + +linux (6.17.0-6.6) questing; urgency=medium + + * questing/linux: 6.17.0-6.6 -proposed tracker (LP: #2126040) + + * Questing update: v6.17.1 upstream stable release (LP: #2126948) + - blk-mq: fix blk_mq_tags double free while nr_requests grown + - gcc-plugins: Remove TODO_verify_il for GCC >= 16 + - scsi: target: target_core_configfs: Add length check to avoid buffer + overflow + - ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free + - wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait() + - media: b2c2: Fix use-after-free causing by irq_check_work in + flexcop_pci_remove + - media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in + probe + - media: tuner: xc5000: Fix use-after-free in xc5000_release + - media: rc: fix races with imon_disconnect() + - media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID + - mm: swap: check for stable address space before operating on the VMA + - wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load() + - media: iris: Fix memory leak by freeing untracked persist buffer + - media: stm32-csi: Fix dereference before NULL check + - ASoC: qcom: audioreach: fix potential null pointer dereference + - Linux 6.17.1 + + * RISC-V kernel config is out of sync with other archs (LP: #1981437) + - [Config] riscv64: Update EFI_SBAT_FILE + - [Config] riscv64: Enable EFI_ZBOOT + - [Config] riscv64: Disable support for non-RVA23 SoCs + - [Config] riscv64: Disable RISCV_ISA_FALLBACK + - [Config] riscv64: Sync config with other architectures + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs after rebase to 6.17 + + -- Timo Aaltonen Tue, 07 Oct 2025 14:15:18 +0300 + +linux (6.17.0-5.5) questing; urgency=medium + + * questing/linux: 6.17.0-5.5 -proposed tracker (LP: #2125319) + + * Packaging resync (LP: #1786013) + - [Packaging] resync git-ubuntu-log + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.09.22) + + * [SRU] Failed to create source package: Unmet build dependencies: + bpftool:native (LP: #2122310) + - [Packaging] fix build profile spec for bpftool + + * UBUNTU: fan: fail to check kmalloc() return could cause a NULL pointer + dereference (LP: #2125053) + - SAUCE: fan: vxlan: check memory allocation for map + + * iproute2 breaking netplan DEP-8 tests in Questing, unexpected "fan-map" in + JSON output (LP: #2124257) + - SAUCE: fan: don't enforce a specific enum value for IFLA_VXLAN_FAN_MAP + + * memory leaks when configuring a small rate limit in audit (LP: #2122554) + - SAUCE: audit: fix skb leak when audit rate limit is exceeded + + * Support AMD Image Signal Processing (ISP) unit V4.0 (LP: #2110092) + - SAUCE: media: platform: amd: Introduce amd isp4 capture driver + - SAUCE: media: platform: amd: low level support for isp4 firmware + - SAUCE: media: platform: amd: Add isp4 fw and hw interface + - SAUCE: media: platform: amd: isp4 subdev and firmware loading handling + added + - SAUCE: media: platform: amd: isp4 video node and buffers handling added + - SAUCE: media: platform: amd: isp4 debug fs logging and more descriptive + errors + - SAUCE: Documentation: add documentation of AMD isp 4 driver + - [Config] Enable AMD_ISP4 + + * 25.10 Snapdragon X Elite: Sync concept kernel changes (LP: #2121477) + - phy: qcom: qmp-combo: Rename 'mode' to 'phy_mode' + - phy: qcom: qmp-combo: store DP phy power state + - phy: qcom: qmp-combo: introduce QMPPHY_MODE + - phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE + - arm64: dts: qcom: x1e80100-crd: Add USB multiport fingerprint reader + - dt-bindings: arm: qcom: Add Dell Latitude 7455 + - dt-bindings: display: panel: samsung,atna40cu11: document ATNA40CU11 + - dt-bindings: display: panel: samsung,atna40ct06: document ATNA40CT06 + - drm/panel-edp: Add BOE NV140WUM-N64 + - arm64: dts: qcom: x1-crd: Enable HBR3 on external DPs + - SAUCE: drm/dp: drm_edp_backlight_set_level: do not always send 3-byte + commands + - SAUCE: drm/edp-panel: Add touchscreen panel used by Lenovo X13s + - SAUCE: net: qrtr: mhi: synchronize qrtr and mhi preparation + - SAUCE: arm64: dts: qcom: x1e78100-t14s-oled: add eDP panel + - SAUCE: wip: arm64: dts: qcom: x1e80100-crd: Add WiFi/BT pwrseq + - SAUCE: wip: arm64: dts: qcom: x1e78100-t14s: enable bluetooth + - SAUCE: drm/dp: clamp PWM bit count to advertised MIN and MAX + capabilities + - SAUCE: arm64: dts: qcom: x1e80100-pmics: Disable pm8010 by default + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps13-9345: Add Left/Right + Speakers and Tweeter + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps13-9345: enable MICs LDO + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps13-9345: Mark audio channels + as left-right swapped + - SAUCE: arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13: Set up 4-lane DP + - SAUCE: dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document default + phy mode + - SAUCE: phy: qcom: qmp-combo: get default qmpphy_mode from DT + - SAUCE: arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes + - SAUCE: dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb- + switch.yaml to allow mode-switch + - SAUCE: dt-bindings: arm: qcom: Add Asus Zenbook A14 UX3407QA LCD/OLED + variants + - SAUCE: arm64: dts: qcom: Rework X1-based Asus Zenbook A14's displays + - SAUCE: arm64: dts: qcom: x1e80100-asus-zenbook-a14: Enable WiFi, + Bluetooth + - SAUCE: arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude + 7455 + - SAUCE: firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / + Latitude 7455 + - SAUCE: dt-bindings: arm: qcom: Add Acer Swift 14 AI + - SAUCE: arm64: dts: qcom: x1-acer-swift-14: Add support for Acer Swift 14 + - SAUCE: arm64: dts: qcom: x1e80100: allow mode-switch events to reach the + QMP Combo PHYs + - SAUCE: arm64: dts: qcom: x1e80100: move dp0/1/2 data-lanes to SoC dtsi + - SAUCE: arm64: dts: qcom: x1e80100: Set up 4-lane DP + - SAUCE: arm64: dts: qcom: x1e80100: move remaining dp0/1/2 data-lanes to + SoC dtsi + - Revert "UBUNTU: SAUCE: Change: cracking sound fix" + + * UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:452:16 + (LP: #2119713) + - EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs for v6.17-rc6 rebase + + -- Timo Aaltonen Mon, 22 Sep 2025 10:33:58 +0300 + +linux (6.17.0-4.4) questing; urgency=medium + + * questing/linux: 6.17.0-4.4 -proposed tracker (LP: #2122321) + + * [SRU] Do not instantiate SPD5118 sensors on i801 SMBus controllers + (LP: #2114963) + - SAUCE: i2c: i801: Do not instantiate spd5118 under SPD Write Disable + + * initramfs-tools: autopkgtest fails on arm64 with Possible missing firmware + /lib/firmware/apple/dfrmtfw-*.bin for built-in driver apple_z2 + (LP: #2115758) + - [Config] Set TOUCHSCREEN_APPLE_Z2=m (arm64) + + * Support TDX host in questing (LP: #2121873) + - SAUCE: x86/kexec: Consolidate relocate_kernel() function parameters + - SAUCE: x86/sme: Use percpu boolean to control WBINVD during kexec + - SAUCE: x86/virt/tdx: Mark memory cache state incoherent when making + SEAMCALL + - SAUCE: x86/kexec: Disable kexec/kdump on platforms with TDX partial + write erratum + - SAUCE: x86/virt/tdx: Remove the !KEXEC_CORE dependency + - SAUCE: x86/virt/tdx: Update the kexec section in the TDX documentation + - SAUCE: KVM: TDX: Explicitly do WBINVD when no more TDX SEAMCALLs + - [Config] enable TDX host support + + * minimal kernel lacks modules for blk disk in arm64 openstack environments + where config_drive is required (LP: #2118499) + - [Config] Enable SYM53C8XX_2 on arm64 + + * Miscellaneous Ubuntu changes + - [Config] Re-enable Rust support, and make sure it doesn't get disabled + by accident + - [Config] updateconfigs for v6.17-rc5 rebase + + -- Timo Aaltonen Mon, 08 Sep 2025 17:10:38 +0300 + +linux (6.17.0-3.3) questing; urgency=medium + + * questing/linux: 6.17.0-3.3 -proposed tracker (LP: #2121512) + + * Enable Xilinx PS UART configs (LP: #2121337) + - [Config] Enable Xilinx PS UART configs + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.08.25) + + * Plucky/Questing fails to boot on (older) Macs (LP: #2105402) + - SAUCE: hack: efi/libstub: enable t14s boot failure hack only on arm64 + + * Miscellaneous Ubuntu changes + - [Packaging] Fix linux-modules Description, add dependency on wireless- + regdb from old -extra + - [Packaging] Fix arch list for bpftool build-dep + + -- Timo Aaltonen Thu, 28 Aug 2025 10:37:03 +0300 + +linux (6.17.0-2.2) questing; urgency=medium + + * questing/linux: 6.17.0-2.2 -proposed tracker (LP: #2121374) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.08.25) + + * enable Mediatek media platform drivers on arm64 (LP: #2116138) + - [Config] enable mediatek media platform drivers + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor5.0.0 [1/38]: Stacking: Audit: Create audit_stamp + structure + - SAUCE: apparmor5.0.0 [2/38]: Stacking: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor5.0.0 [3/38]: Stacking: LSM: security_lsmblob_to_secctx + module selection + - SAUCE: apparmor5.0.0 [4/38]: Stacking: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor5.0.0 [5/38]: Stacking: Audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor5.0.0 [6/38]: Stacking: Audit: Add record for multiple + object contexts + - SAUCE: apparmor5.0.0 [7/38]: Stacking: LSM: Single calls in secid hooks + - SAUCE: apparmor5.0.0 [8/38]: Stacking: LSM: Exclusive secmark usage + - SAUCE: apparmor5.0.0 [9/38]: Stacking: Audit: Call only the first of the + audit rule hooks + - SAUCE: apparmor5.0.0 [10/38]: Stacking: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor5.0.0 [11/38]: Revert "apparmor: fix dbus permission + queries to v9 ABI" + - SAUCE: apparmor5.0.0 [12/38]: Revert "apparmor: gate make fine grained + unix mediation behind v9 abi" + - SAUCE: apparmor5.0.0 [13/38]: apparmor: net: patch to provide + compatibility with v2.x net rules + - SAUCE: apparmor5.0.0 [14/38]: apparmor: net: add fine grained ipv4/ipv6 + mediation + - SAUCE: apparmor5.0.0 [15/38]: apparmor: userns: add unprivileged user ns + mediation + - SAUCE: apparmor5.0.0 [16/38]: apparmor: userns: Add sysctls for + additional controls of unpriv userns restrictions + - SAUCE: apparmor5.0.0 [18/38]: apparmor: userns: open userns related + sysctl so lxc can check if restriction are in place + - SAUCE: apparmor5.0.0 [19/38]: apparmor: userns: allow profile to be + transitioned when a userns is created + - SAUCE: apparmor5.0.0 [20/38]: aoparmor: userns: Add support for execpath + in userns + - SAUCE: apparmor5.0.0 [21/38]: apparmor: mqueue: call + security_inode_init_security on inode creation + - SAUCE: apparmor5.0.0 [22/38]: apparmor: mqueue: add fine grained + mediation of posix mqueues + - SAUCE: apparmor5.0.0 [23/38]: apparmor: uring: add io_uring mediation + - SAUCE: apparmor5.0.0 [26/38]: apparmor: prompt: setup slab cache for + audit data + - SAUCE: apparmor5.0.0 [27/38]: apparmor: prompt: add the ability for + profiles to have a learning cache + - SAUCE: apparmor5.0.0 [28/38]: apparmor: prompt: enable userspace upcall + for mediation + - SAUCE: apparmor5.0.0 [29/38]: apparmor: prompt: pass prompt boolean + through into path_name as well + - SAUCE: apparmor5.0.0 [30/38]: apparmor: add AA_DEBUG_PROFILE to have + debug on profiles with flag set + - SAUCE: apparmor5.0.0 [31/38]: apparmor: make str table more generic and + be able to have multiple entries + - SAUCE: apparmor5.0.0 [32/38]: apparmor: check for supported version in + notification messages. + - SAUCE: apparmor5.0.0 [33/38]: apparmor: refactor building notice so it + is easier to extend + - SAUCE: apparmor5.0.0 [34/38]: apparmor: switch from ENOTSUPP to + EPROTONOSUPPORT + - SAUCE: apparmor5.0.0 [35/38]: UBUNTU: SAUCE: apparmor5.0.0 [35/38]: + apparmor: add support for meta data tags + - SAUCE: apparmor5.0.0 [36/38]: apparmor: mmap_file() doesn't need to be + called atomically + - SAUCE: apparmor5.0.0 [37/38]: apparmor: guard against free routines + being called with a NULL + - SAUCE: apparmor5.0.0 [38/38]: apparmor: prevent profile->disconnected + double free in aa_free_profile + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * Installation of AppArmor on a 6.14 kernel produces error message "Illegal + number: yes" (LP: #2102680) + - SAUCE: apparmor5.0.0 [24/38]: apparmor: create an + AA_SFS_TYPE_BOOLEAN_INTPRINT sysctl variant + - SAUCE: apparmor5.0.0 [25/38]: apparmor: Use AA_SFS_FILE_BOOLEAN_INTPRINT + for userns and io_uring sysctls + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in + mantic (LP: #2032602) + - SAUCE: apparmor5.0.0 [17/38]: apparmor: userns - make it so special + unconfined profiles can mediate user namespaces + + * nvme no longer detected on boot after upgrade to 6.8.0-60 (LP: #2111521) + - SAUCE: PCI: Disable RRS polling for Intel SSDPE2KX020T8 nvme + + * Miscellaneous Ubuntu changes + - [Packaging] Use host bpftool if doing cross-compiling + - [Packaging] Rename to linux + - [Packaging] d/t/ubuntu-regression-suite: use https to clone + - [Packaging] d/t/control: add snapd and fuse-overlayfs dependencies + - [Packaging] Drop/update some dkms packages. + + -- Timo Aaltonen Tue, 26 Aug 2025 17:15:12 +0300 + +linux-unstable (6.17.0-1.1) questing; urgency=medium + + * questing/linux-unstable: 6.17.0-1.1 -proposed tracker (LP: #2121054) + + * Enable CONFIG_IPV6_OPTIMISTIC_DAD (LP: #1728366) + - [Config] Enable CONFIG_IPV6_OPTIMISTIC_DAD + + * No IP Address assigned after hot-plugging Ethernet cable on HP Platform + (LP: #2115393) + - Revert "e1000e: change k1 configuration on MTP and later platforms" + + * sources list generation using dwarfdump takes up to 0.5hr in build process + (LP: #2104911) + - [Packaging] Don't generate list of source files + + * Miscellaneous Ubuntu changes + - [Config] updateconfig following rebase to v6.17-rc2 + - [Packaging] Renane to linux-unstable + - SAUCE: gpio: aaeon: use new GPIO line value setter callbacks + - [Packaging] debian.master/dkms-versions: Drop failing dkms packages + - [Packaging] Don't suggest linux-modules-extra + + -- Timo Aaltonen Thu, 21 Aug 2025 11:22:12 +0300 + +linux-unstable (6.17.0-0.0) questing; urgency=medium + + * dummy entry + + -- Timo Aaltonen Mon, 18 Aug 2025 18:27:35 +0300 + +linux (6.16.0-16.16) questing; urgency=medium + + * questing/linux: 6.16.0-16.16 -proposed tracker (LP: #2120720) + + -- Paolo Pisati Sat, 16 Aug 2025 17:31:00 +0200 + +linux (6.16.0-14.14) questing; urgency=medium + + * questing/linux: 6.16.0-14.14 -proposed tracker (LP: #2120657) + + * BPF header file in wrong location (LP: #2118965) + - [Packaging] Install bpf header to correct location + + * enlarge the number of the serial port for sh-sci serial driver + (LP: #2116140) + - [Config] enlarge CONFIG_SERIAL_SH_SCI_NR_UARTS + + * Ubuntu 24.04+ arm64: screen resolution fixed to 1024x768 with last kernel + update (LP: #2115068) + - [Config] Replace FB_HYPERV with DRM_HYPERV + + * Miscellaneous Ubuntu changes + - [Packaging] move to unversioned gcc by default + - [Config] bump toolchain version to gcc-15 + + -- Paolo Pisati Fri, 15 Aug 2025 08:24:39 +0200 + +linux (6.16.0-13.13) questing; urgency=medium + + * questing/linux: 6.16.0-13.13 -proposed tracker (LP: #2119951) + + * Miscellaneous Ubuntu changes + - [Packaging] debian.master/dkms-versions -- remove ipu6 since it's + upstream + + -- Paolo Pisati Thu, 07 Aug 2025 16:32:32 +0200 + +linux (6.16.0-12.12) questing; urgency=medium + + * questing/linux: 6.16.0-12.12 -proposed tracker (LP: #2119711) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.07.28) + - [Packaging] resync git-ubuntu-log + - [Packaging] update variants + - [Packaging] update annotations scripts + + -- Paolo Pisati Thu, 07 Aug 2025 09:59:27 +0200 + +linux (6.16.0-11.11) questing; urgency=medium + + * questing/linux: 6.16.0-11.11 -proposed tracker (LP: #2119360) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor5.0.0 [1/93]: Stacking: Audit: Create audit_stamp + structure + - SAUCE: apparmor5.0.0 [2/93]: Stacking: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor5.0.0 [3/93]: Stacking: LSM: security_lsmblob_to_secctx + module selection + - SAUCE: apparmor5.0.0 [4/93]: Stacking: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor5.0.0 [5/93]: Stacking: Audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor5.0.0 [6/93]: Stacking: Audit: Add record for multiple + object contexts + - SAUCE: apparmor5.0.0 [7/93]: Stacking: LSM: Single calls in secid hooks + - SAUCE: apparmor5.0.0 [8/93]: Stacking: LSM: Exclusive secmark usage + - SAUCE: apparmor5.0.0 [9/93]: Stacking: Audit: Call only the first of the + audit rule hooks + - SAUCE: apparmor5.0.0 [10/93]: Stacking: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor5.0.0 [11/93]: 6.17 apparmor-next: apparmor: Use + str_yes_no() helper function + - SAUCE: apparmor5.0.0 [12/93]: 6.17 apparmor-next: apparmor: Improve + debug print infrastructure + - SAUCE: apparmor5.0.0 [13/93]: 6.17 apparmor-next: apparmor: cleanup: + attachment perm lookup to use lookup_perms() + - SAUCE: apparmor5.0.0 [14/93]: 6.17 apparmor-next: apparmor: remove + redundant unconfined check. + - SAUCE: apparmor5.0.0 [15/93]: 6.17 apparmor-next: apparmor: switch + signal mediation to use RULE_MEDIATES + - SAUCE: apparmor5.0.0 [16/93]: 6.17 apparmor-next: apparmor: ensure + labels with more than one entry have correct flags + - SAUCE: apparmor5.0.0 [17/93]: 6.17 apparmor-next: apparmor: remove + explicit restriction that unconfined cannot use change_hat + - SAUCE: apparmor5.0.0 [18/93]: 6.17 apparmor-next: apparmor: cleanup: + refactor file_perm() to doc semantics of some checks + - SAUCE: apparmor5.0.0 [19/93]: 6.17 apparmor-next: apparmor: carry + mediation check on label + - SAUCE: apparmor5.0.0 [20/93]: 6.17 apparmor-next: apparmor: add + additional flags to extended permission. + - SAUCE: apparmor5.0.0 [21/93]: 6.17 apparmor-next: apparmor: add support + for profiles to define the kill signal + - SAUCE: apparmor5.0.0 [22/93]: 6.17 apparmor-next: apparmor: fix + x_table_lookup when stacking is not the first entry + - SAUCE: apparmor5.0.0 [23/93]: 6.17 apparmor-next: apparmor: add ability + to mediate caps with policy state machine + - SAUCE: apparmor5.0.0 [24/93]: 6.17 apparmor-next: apparmor: remove + af_select macro + - SAUCE: apparmor5.0.0 [25/93]: 6.17 apparmor-next: apparmor: lift kernel + socket check out of critical section + - SAUCE: apparmor5.0.0 [26/93]: 6.17 apparmor-next: apparmor: in + preparation for finer networking rules rework match_prot + - SAUCE: apparmor5.0.0 [27/93]: 6.17 apparmor-next: apparmor: add fine + grained af_unix mediation + - SAUCE: apparmor5.0.0 [28/93]: 6.17 apparmor-next: apparmor: gate make + fine grained unix mediation behind v9 abi + - SAUCE: apparmor5.0.0 [29/93]: 6.17 apparmor-next: apparmor: fix dbus + permission queries to v9 ABI + - SAUCE: apparmor5.0.0 [30/93]: 6.17 apparmor-next: apparmor: Fix checking + address of an array in accum_label_info() + - SAUCE: apparmor5.0.0 [31/93]: 6.17 apparmor-next: apparmor: Modify + mismatched function name + - SAUCE: apparmor5.0.0 [32/93]: 6.17 apparmor-next: apparmor: Modify + mismatched function name + - SAUCE: apparmor5.0.0 [33/93]: 6.17 apparmor-next: apparmor: fix typos + and spelling errors + - SAUCE: apparmor5.0.0 [34/93]: 6.17 apparmor-next: apparmor: use the + condition in AA_BUG_FMT even with debug disabled + - SAUCE: apparmor5.0.0 [35/93]: 6.17 apparmor-next: apparmor: Remove + unused variable 'sock' in __file_sock_perm() + - SAUCE: apparmor5.0.0 [68/93]: Revert "6.17 apparmor-next: apparmor: fix + dbus permission queries to v9 ABI" + - SAUCE: apparmor5.0.0 [69/93]: Revert "6.17 apparmor-next: apparmor: gate + make fine grained unix mediation behind v9 abi" + - SAUCE: apparmor5.0.0 [70/93]: apparmor: net: patch to provide + compatibility with v2.x net rules + - SAUCE: apparmor5.0.0 [71/93]: apparmor: net: add fine grained ipv4/ipv6 + mediation + - SAUCE: apparmor5.0.0 [72/93]: apparmor: userns: add unprivileged user ns + mediation + - SAUCE: apparmor5.0.0 [73/93]: apparmor: userns: Add sysctls for + additional controls of unpriv userns restrictions + - SAUCE: apparmor5.0.0 [75/93]: apparmor: userns: open userns related + sysctl so lxc can check if restriction are in place + - SAUCE: apparmor5.0.0 [76/93]: apparmor: userns: allow profile to be + transitioned when a userns is created + - SAUCE: apparmor5.0.0 [80/93]: apparmor: uring: add io_uring mediation + - SAUCE: apparmor5.0.0 [83/93]: apparmor: prompt: setup slab cache for + audit data + - SAUCE: apparmor5.0.0 [84/93]: apparmor: prompt: add the ability for + profiles to have a learning cache + - SAUCE: apparmor5.0.0 [85/93]: apparmor: prompt: enable userspace upcall + for mediation + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * Installation of AppArmor on a 6.14 kernel produces error message "Illegal + number: yes" (LP: #2102680) + - SAUCE: apparmor5.0.0 [81/93]: apparmor: create an + AA_SFS_TYPE_BOOLEAN_INTPRINT sysctl variant + - SAUCE: apparmor5.0.0 [82/93]: apparmor: Use AA_SFS_FILE_BOOLEAN_INTPRINT + for userns and io_uring sysctls + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in + mantic (LP: #2032602) + - SAUCE: apparmor5.0.0 [74/93]: apparmor: userns - make it so special + unconfined profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor5.0.0 [36/93]: 6.17 apparmor-next: security/apparmor: use + kfree_sensitive() in unpack_secmark() + - SAUCE: apparmor5.0.0 [37/93]: 6.17 apparmor-next: apparmor: Fix + incorrect profile->signal range check + - SAUCE: apparmor5.0.0 [38/93]: 6.17 apparmor-next: apparmor: fix some + kernel-doc issues in header files + - SAUCE: apparmor5.0.0 [39/93]: 6.17 apparmor-next: apparmor: ensure + WB_HISTORY_SIZE value is a power of 2 + - SAUCE: apparmor5.0.0 [40/93]: 6.17 apparmor-next: apparmor: fix loop + detection used in conflicting attachment resolution + - SAUCE: apparmor5.0.0 [41/93]: 6.17 apparmor-next: apparmor: make all + generated string array headers const char *const + - SAUCE: apparmor5.0.0 [42/93]: 6.17 apparmor-next: apparmor: force audit + on unconfined exec if info is set by find_attach + - SAUCE: apparmor5.0.0 [43/93]: 6.17 apparmor-next: apparmor: move the + "conflicting profile attachments" infostr to a const declaration + - SAUCE: apparmor5.0.0 [44/93]: 6.17 apparmor-next: apparmor: include + conflicting attachment info for confined ix/ux fallback + - SAUCE: apparmor5.0.0 [45/93]: 6.17 apparmor-next: apparmor: force + auditing of conflicting attachment execs from confined + - SAUCE: apparmor5.0.0 [46/93]: 6.17 apparmor-next: apparmor: make + debug_values_table static + - SAUCE: apparmor5.0.0 [47/93]: 6.17 apparmor-next: apparmor: Document + that label must be last member in struct aa_profile + - SAUCE: apparmor5.0.0 [48/93]: 6.17 apparmor-next: apparmor: mitigate + parser generating large xtables + - SAUCE: apparmor5.0.0 [49/93]: 6.17 apparmor-next: apparmor: make + __begin_current_label_crit_section() indicate whether put is needed + - SAUCE: apparmor5.0.0 [50/93]: 6.17 apparmor-next: apparmor: update + kernel doc comments for xxx_label_crit_section + - SAUCE: apparmor5.0.0 [51/93]: 6.17 apparmor-next: apparmor: Remove use + of the double lock + - SAUCE: apparmor5.0.0 [52/93]: 6.17 apparmor-next: apparmor: fix af_unix + auditing to include all address information + - SAUCE: apparmor5.0.0 [53/93]: 6.17 apparmor-next: apparmor: fix + AA_DEBUG_LABEL() + - SAUCE: apparmor5.0.0 [54/93]: 6.17 apparmor-next: apparmor: fix + regression in fs based unix sockets when using old abi + - SAUCE: apparmor5.0.0 [55/93]: 6.17 apparmor-next: apparmor: make sure + unix socket labeling is correctly updated. + - SAUCE: apparmor5.0.0 [56/93]: 6.17 apparmor-next: apparmor: shift ouid + when mediating hard links in userns + - SAUCE: apparmor5.0.0 [57/93]: 6.17 apparmor-next: apparmor: shift uid + when mediating af_unix in userns + - SAUCE: apparmor5.0.0 [58/93]: 6.17 apparmor-next: apparmor: Fix 8-byte + alignment for initial dfa blob streams + - SAUCE: apparmor5.0.0 [59/93]: 6.17 apparmor-next: apparmor: Fix + unaligned memory accesses in KUnit test + - SAUCE: apparmor5.0.0 [60/93]: 6.17 apparmor-next: apparmor: fix kernel + doc warnings for kernel test robot + - SAUCE: apparmor5.0.0 [61/93]: 6.17 apparmor-next: apparmor: remove + redundant perms.allow MAY_EXEC bitflag set + - SAUCE: apparmor5.0.0 [62/93]: 6.17 apparmor-next: apparmor: fix + documentation mismatches in val_mask_to_str and socket functions + - SAUCE: apparmor5.0.0 [63/93]: 6.17 apparmor-next: apparmor: transition + from a list of rules to a vector of rules + - SAUCE: apparmor5.0.0 [64/93]: 6.17 apparmor-next: apparmor: fix: accept2 + being specifie even when permission table is presnt + - SAUCE: apparmor5.0.0 [65/93]: 6.17 apparmor-next: apparmor: Remove the + unused variable rules + - SAUCE: apparmor5.0.0 [66/93]: 6.17 apparmor-next: apparmor: fix test + error: WARNING in apparmor_unix_stream_connect + - SAUCE: apparmor5.0.0 [67/93]: 6.17 apparmor-next: apparmor: fix + Regression on linux-next (next-20250721) + - SAUCE: apparmor5.0.0 [77/93]: aoparmor: userns: Add support for execpath + in userns + - SAUCE: apparmor5.0.0 [78/93]: apparmor: mqueue: call + security_inode_init_security on inode creation + - SAUCE: apparmor5.0.0 [79/93]: apparmor: mqueue: add fine grained + mediation of posix mqueues + - SAUCE: apparmor5.0.0 [86/93]: apparmor: prompt: pass prompt boolean + through into path_name as well + - SAUCE: apparmor5.0.0 [87/93]: apparmor: add AA_DEBUG_PROFILE to have + debug on profiles with flag set + - SAUCE: apparmor5.0.0 [88/93]: apparmor: make str table more generic and + be able to have multiple entries + - SAUCE: apparmor5.0.0 [89/93]: apparmor: check for supported version in + notification messages. + - SAUCE: apparmor5.0.0 [90/93]: apparmor: refactor building notice so it + is easier to extend + - SAUCE: apparmor5.0.0 [91/93]: apparmor: switch from ENOTSUPP to + EPROTONOSUPPORT + - SAUCE: apparmor5.0.0 [92/93]: UBUNTU: SAUCE: apparmor5.0.0 [92/93]: + apparmor: add support for meta data tags + - SAUCE: apparmor5.0.0 [93/93]: apparmor: mmap_file() doesn't need to be + called atomically + + -- Paolo Pisati Sat, 02 Aug 2025 11:25:12 +0200 + +linux (6.16.0-10.10) questing; urgency=medium + + * questing/linux: 6.16.0-10.10 -proposed tracker (LP: #2118882) + + * Miscellaneous Ubuntu changes + - Update dropped.txt + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] disable signing for s390x" + + -- Paolo Pisati Mon, 28 Jul 2025 08:23:12 +0200 + +linux (6.16.0-9.9) questing; urgency=medium + + * questing/linux: 6.16.0-9.9 -proposed tracker (LP: #2117331) + + -- Paolo Pisati Mon, 21 Jul 2025 09:06:33 +0200 + +linux (6.16.0-8.8) questing; urgency=medium + + * questing/linux: 6.16.0-8.8 -proposed tracker (LP: #2117156) + + * Miscellaneous Ubuntu changes + - [Packaging] rename to linux + - [Packaging] disable signing for s390x + + -- Paolo Pisati Thu, 17 Jul 2025 15:11:36 +0200 + +linux-unstable (6.16.0-7.7) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-7.7 -proposed tracker (LP: #2116881) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.16-rc6 rebase + + -- Paolo Pisati Tue, 15 Jul 2025 09:13:15 +0200 + +linux-unstable (6.16.0-6.6) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-6.6 -proposed tracker (LP: #2116265) + + * [UBUNTU 25.04] lszcrypt output shows no cards because ap module has to be + loaded manually (LP: #2116061) + - [Config] s390: Build ap driver into the kernel + + * Miscellaneous Ubuntu changes + - [Packaging] debian.master/control.stub.in: fix dpkg-checkbuilddeps + - [Config] RUSTC_VERSION = 108501 + + -- Paolo Pisati Sun, 13 Jul 2025 10:16:39 +0200 + +linux-unstable (6.16.0-5.5) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-5.5 -proposed tracker (LP: #2115966) + + * Miscellaneous Ubuntu changes + - [Packaging] debian.master/control.stub.in: prepare for cross-compiling + - [Packaging] debian/rules.d/0-common-vars.mk: avoid infinite loop + - [Packaging] debian/rules.d/0-common-vars.mk: use native GCC + - [Packaging] debian/rules.d/0-common-vars.mk: enable linux-tools cross- + compilation + - [Packaging] debian/rules.d/0-common-vars.mk: fix linux-tools cross-build + - [Config] updateconfigs following v6.16-rc5 rebase + + -- Paolo Pisati Tue, 08 Jul 2025 15:09:17 +0200 + +linux-unstable (6.16.0-4.4) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-4.4 -proposed tracker (LP: #2115628) + + -- Paolo Pisati Mon, 30 Jun 2025 13:34:49 +0200 + +linux-unstable (6.16.0-3.3) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-3.3 -proposed tracker (LP: #2115254) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.06.03) + + * arm64: kernel image cannot be booted in UEFI despite EFI stub and ZBOOT + (LP: #2098111) + - [Packaging] Install compressed vmlinuz.efi on arm64 + + * Creating a VXLAN interface with a Fan mapping causes a NULL pointer + dereference caught by ubuntu_fan_smoke_test:sut-scan (LP: #2113992) + - SAUCE: fan: vxlan: parse fan-map from IFLA_VXLAN_FAN_MAP attribute ID + + * Dell AIO backlight is not working, dell_uart_backlight module is missing + (LP: #2083800) + - [Config] enable CONFIG_DELL_UART_BACKLIGHT + + * Miscellaneous Ubuntu changes + - [Packaging] Update debian/signature-inclusion + + -- Paolo Pisati Wed, 25 Jun 2025 13:07:01 +0200 + +linux-unstable (6.16.0-2.2) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-2.2 -proposed tracker (LP: #2114841) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.06.03) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.16-rc2 + + -- Paolo Pisati Wed, 18 Jun 2025 15:33:41 +0200 + +linux-unstable (6.16.0-1.1) questing; urgency=medium + + * questing/linux-unstable: 6.16.0-1.1 -proposed tracker (LP: #2114165) + + * Support Sony IMX471 camera sensor for Intel IPU7 platforms (LP: #2107320) + - SAUCE: media: ipu-bridge: Support imx471 sensor + + * Rotate the Canonical Livepatch key (LP: #2111244) + - [config] prepare for Canonical Livepatch key rotation + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.05.26) + + * Miscellaneous Ubuntu changes + - Update dropped.txt + - Update dropped.txt wrt v6.16-rc1 rebase + - [Config] updateconfigs following v6.16-rc1 + - [Config] FTBFS: disable INTEL_SKL_INT3472 + - SAUCE: binder: turn into module - lock_vma_under_rcu() + - [Packaging] debian.master/dkms-versions -- temporarily remove zfs FTBFS + - [Packaging] debian.master/dkms-versions -- temporarily remove + v4l2loopback FTBFS + + -- Paolo Pisati Thu, 12 Jun 2025 12:58:18 +0200 + +linux-unstable (6.15.0-2.2) questing; urgency=medium + + * questing/linux-unstable: 6.15.0-2.2 -proposed tracker (LP: #2111721) + + * Miscellaneous Ubuntu changes + - [Config] Updateconfigs for v6.15-rc7 rebase + + -- Paolo Pisati Mon, 26 May 2025 15:24:31 +0200 + +linux-unstable (6.15.0-1.1) questing; urgency=medium + + * questing/linux-unstable: 6.15.0-1.1 -proposed tracker (LP: #2110148) + + * Drop support for modules-extra (LP: #2042831) + - [Packaging] Drop support for modules-extra + + * Miscellaneous Ubuntu changes + - [Packaging] Rename to linux-unstable, bump version + - [Packaging] Re-enable tools build on cross-builds + - [Packaging] debian.master/dkms-versions -- temporarily remove all dkms + - [Packaging] Introduce do_sources_list build flag + - [Config] Updateconfigs for v6.15-rc5 rebase + - SAUCE: Revert "gcc-15: acpi: sprinkle random '__nonstring' crumbles around" + + -- Timo Aaltonen Thu, 08 May 2025 22:29:23 +0300 + +linux-unstable (6.15.0-0.0) questing; urgency=medium + + * Dummy entry + + -- Timo Aaltonen Wed, 07 May 2025 18:41:33 +0300 + +linux (6.14.0-17.17) plucky; urgency=medium + + * plucky/linux: 6.14.0-17.17 -proposed tracker (LP: #2109741) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2025.04.14) + + * Plucky update: v6.14.4 upstream stable release (LP: #2109367) + - scsi: hisi_sas: Enable force phy when SATA disk directly connected + - wifi: at76c50x: fix use after free access in at76_disconnect + - wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue() + - wifi: mac80211: Purge vif txq in ieee80211_do_stop() + - wifi: brcmfmac: fix memory leak in brcmf_get_module_param + - wifi: wl1251: fix memory leak in wl1251_tx_work + - scsi: iscsi: Fix missing scsi_host_put() in error path + - scsi: smartpqi: Use is_kdump_kernel() to check for kdump + - md/raid10: fix missing discard IO accounting + - md/md-bitmap: fix stats collection for external bitmaps + - ASoC: dwc: always enable/disable i2s irqs + - ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe() + - crypto: tegra - Fix IV usage for AES ECB + - ovl: remove unused forward declaration + - RDMA/bnxt_re: Fix budget handling of notification queue + - RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe() + - RDMA/hns: Fix wrong maximum DMA segment size + - ALSA: hda/cirrus_scodec_test: Don't select dependencies + - ALSA: hda/realtek - Fixed ASUS platform headset Mic issue + - ASoC: cs42l43: Reset clamp override on jack removal + - RDMA/core: Silence oversized kvmalloc() warning + - firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version + - Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address + - Bluetooth: btrtl: Prevent potential NULL dereference + - Bluetooth: qca: fix NV variant for one of WCN3950 SoCs + - Bluetooth: l2cap: Check encryption key size on incoming connection + - RDMA/bnxt_re: Remove unusable nq variable + - ipv6: add exception routes to GC list in rt6_insert_exception + - xen: fix multicall debug feature + - mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show() + - wifi: iwlwifi: pcie: set state to no-FW before reset handshake + - Revert "wifi: mac80211: Update skb's control block key in + ieee80211_tx_dequeue()" + - igc: fix PTM cycle trigger logic + - igc: increase wait time before retrying PTM + - igc: move ktime snapshot into PTM retry loop + - igc: handle the IGC_PTP_ENABLED flag correctly + - igc: cleanup PTP module if probe fails + - igc: add lock preventing multiple simultaneous PTM transactions + - perf tools: Remove evsel__handle_error_quirks() + - dt-bindings: soc: fsl: fsl,ls1028a-reset: Fix maintainer entry + - smc: Fix lockdep false-positive for IPPROTO_SMC. + - test suite: use %zu to print size_t + - selftests: mincore: fix tmpfs mincore test failure + - pds_core: fix memory leak in pdsc_debugfs_add_qcq() + - ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll() + - net: mctp: Set SOCK_RCU_FREE + - net: hibmcge: fix incorrect pause frame statistics issue + - net: hibmcge: fix incorrect multicast filtering issue + - net: hibmcge: fix wrong mtu log issue + - net: hibmcge: fix not restore rx pause mac addr after reset issue + - block: fix resource leak in blk_register_queue() error path + - netlink: specs: ovs_vport: align with C codegen capabilities + - net: openvswitch: fix nested key length validation in the set() action + - can: rockchip_canfd: fix broken quirks checks + - net: ngbe: fix memory leak in ngbe_probe() error path + - octeontx2-pf: handle otx2_mbox_get_rsp errors + - net: ethernet: ti: am65-cpsw: fix port_np reference counting + - eth: bnxt: fix missing ring index trim on error path + - loop: aio inherit the ioprio of original request + - loop: stop using vfs_iter_{read,write} for buffered I/O + - nvmet: pci-epf: always fully initialize completion entries + - nvmet: pci-epf: clear CC and CSTS when disabling the controller + - ata: libata-sata: Save all fields from sense data descriptor + - cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path + - netlink: specs: rt-link: add an attr layer around alt-ifname + - netlink: specs: rtnetlink: attribute naming corrections + - netlink: specs: rt-link: adjust mctp attribute naming + - netlink: specs: rt-neigh: prefix struct nfmsg members with ndm + - net: b53: enable BPDU reception for management port + - net: bridge: switchdev: do not notify new brentries as changed + - net: txgbe: fix memory leak in txgbe_probe() error path + - net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never + registered + - net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported + - net: dsa: clean up FDB, MDB, VLAN entries on unbind + - net: dsa: free routing table on probe failure + - net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails + - ptp: ocp: fix start time alignment in ptp_ocp_signal_set + - netfilter: conntrack: fix erronous removal of offload bit + - net: ti: icss-iep: Add pwidth configuration for perout signal + - net: ti: icss-iep: Add phase offset configuration for perout signal + - net: ti: icss-iep: Fix possible NULL pointer dereference for perout request + - net: ethernet: mtk_eth_soc: reapply mdc divider on reset + - net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for + 100Mbps + - net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings + - riscv: Use kvmalloc_array on relocation_hashtable + - riscv: Properly export reserved regions in /proc/iomem + - riscv: module: Fix out-of-bounds relocation access + - riscv: module: Allocate PLT entries for R_RISCV_PLT32 + - kunit: qemu_configs: SH: Respect kunit cmdline + - thermal: intel: int340x: Fix Panther Lake DLVR support + - riscv: KGDB: Do not inline arch_kgdb_breakpoint() + - riscv: KGDB: Remove ".option norvc/.option rvc" for kgdb_compiled_break + - cpufreq/sched: Fix the usage of CPUFREQ_NEED_UPDATE_LIMITS + - objtool/rust: add one more `noreturn` Rust function for Rust 1.86.0 + - rust: helpers: Remove volatile qualifier from io helpers + - rust: kasan/kbuild: fix missing flags on first build + - rust: disable `clippy::needless_continue` + - rust: kbuild: Don't export __pfx symbols + - rust: kbuild: use `pound` to support GNU Make < 4.3 + - writeback: fix false warning in inode_to_wb() + - Revert "PCI: Avoid reset when disabled via sysfs" + - ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event + - ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate + - ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels + - ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16 + - ASoC: qcom: Fix sc7280 lpass potential buffer overflow + - accel/ivpu: Fix the NPU's DPU frequency calculation + - alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate + - asus-laptop: Fix an uninitialized variable + - block: integrity: Do not call set_page_dirty_lock() + - drm/v3d: Fix Indirect Dispatch configuration for V3D 7.1.6 and later + - drm/msm/dpu: Fix error pointers in dpu_plane_virtual_atomic_check + - drm/msm/dpu: drop rogue intr_tear_rd_ptr values + - dma-buf/sw_sync: Decrement refcount on error in sw_sync_ioctl_get_deadline() + - nfs: add missing selections of CONFIG_CRC32 + - nfsd: decrease sc_count directly if fail to queue dl_recall + - i2c: atr: Fix wrong include + - eventpoll: abstract out ep_try_send_events() helper + - eventpoll: Set epoll timeout if it's in the future + - ftrace: fix incorrect hash size in register_ftrace_direct() + - drm/msm/a6xx+: Don't let IB_SIZE overflow + - Bluetooth: l2cap: Process valid commands in too long frame + - Bluetooth: vhci: Avoid needless snprintf() calls + - btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN + - btrfs: correctly escape subvol in btrfs_show_options() + - cpufreq/sched: Explicitly synchronize limits_changed flag handling + - crypto: caam/qi - Fix drv_ctx refcount bug + - hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key + - i2c: cros-ec-tunnel: defer probe if parent EC is not present + - isofs: Prevent the use of too small fid + - lib/iov_iter: fix to increase non slab folio refcount + - loop: properly send KOBJ_CHANGED uevent for disk device + - loop: LOOP_SET_FD: send uevents for partitions + - mm/compaction: fix bug in hugetlb handling pathway + - mm/gup: fix wrongly calculated returned value in fault_in_safe_writeable() + - mm: fix filemap_get_folios_contig returning batches of identical folios + - mm: fix apply_to_existing_page_range() + - ovl: don't allow datadir only + - ksmbd: Fix dangling pointer in krb_authenticate + - ksmbd: fix use-after-free in __smb2_lease_break_noti() + - ksmbd: fix use-after-free in smb_break_all_levII_oplock() + - ksmbd: Prevent integer overflow in calculation of deadtime + - ksmbd: fix the warning from __kernel_write_iter + - Revert "smb: client: Fix netns refcount imbalance causing leaks and use- + after-free" + - Revert "smb: client: fix TCP timers deadlock after rmmod" + - riscv: Avoid fortify warning in syscall_get_arguments() + - selftests/mm: generate a temporary mountpoint for cgroup filesystem + - slab: ensure slab->obj_exts is clear in a newly allocated slab page + - smb3 client: fix open hardlink on deferred close file error + - string: Add load_unaligned_zeropad() code path to sized_strscpy() + - tracing: Fix filter string testing + - virtiofs: add filesystem context source name check + - x86/microcode/AMD: Extend the SHA check to Zen5, block loading of any + unreleased standalone Zen5 microcode patches + - x86/cpu/amd: Fix workaround for erratum 1054 + - x86/boot/sev: Avoid shared GHCB page for early memory acceptance + - scsi: megaraid_sas: Block zero-length ATA VPD inquiry + - scsi: ufs: exynos: Move UFS shareability value to drvdata + - scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set + - scsi: ufs: exynos: Ensure consistent phy reference counts + - RDMA/cma: Fix workqueue crash in cma_netevent_work_handler + - RAS/AMD/ATL: Include row[13] bit in row retirement + - RAS/AMD/FMPM: Get masked address + - platform/x86: amd: pmf: Fix STT limits + - perf/x86/intel: Allow to update user space GPRs from PEBS records + - perf/x86/intel/uncore: Fix the scale of IIO free running counters on SNR + - perf/x86/intel/uncore: Fix the scale of IIO free running counters on ICX + - perf/x86/intel/uncore: Fix the scale of IIO free running counters on SPR + - drm/repaper: fix integer overflows in repeat functions + - drm/ast: Fix ast_dp connection status + - drm/msm/dsi: Add check for devm_kstrdup() + - drm/msm/a6xx: Fix stale rpmh votes from GPU + - drm/amdgpu: Prefer shadow rom when available + - drm/amd/display: prevent hang on link training fail + - drm/amd: Handle being compiled without SI or CIK support better + - drm/amd/display: Actually do immediate vblank disable + - drm/amd/display: Increase vblank offdelay for PSR panels + - drm/amd/pm: Prevent division by zero + - drm/amd/pm/powerplay: Prevent division by zero + - drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2 + - drm/amd/pm/smu11: Prevent division by zero + - drm/amd/pm/powerplay/hwmgr/smu7_thermal: Prevent division by zero + - drm/amd/pm/swsmu/smu13/smu_v13_0: Prevent division by zero + - drm/amd/pm/powerplay/hwmgr/vega20_thermal: Prevent division by zero + - drm/amdgpu/mes12: optimize MES pipe FW version fetching + - drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed + - drm/xe: Use local fence in error path of xe_migrate_clear + - drm/virtio: Don't attach GEM to a non-created context in gem_object_open() + - drm/amd/display: Add HP Elitebook 645 to the quirk list for eDP on DP1 + - drm/amd/display: Protect FPU in dml2_validate()/dml21_validate() + - drm/amd/display: Protect FPU in dml21_copy() + - drm/amdgpu/mes11: optimize MES pipe FW version fetching + - drm/amdgpu/dma_buf: fix page_link check + - drm/nouveau: prime: fix ttm_bo_delayed_delete oops + - drm/imagination: fix firmware memory leaks + - drm/imagination: take paired job reference + - drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb() + - drm/sti: remove duplicate object names + - drm/i915: Fix scanline_offset for LNL+ and BMG+ + - drm/xe: Fix an out-of-bounds shift when invalidating TLB + - Revert "UBUNTU: SAUCE: drm/xe/bmg: Add one additional PCI ID" + - drm/xe/bmg: Add one additional PCI ID + - drm/i915/gvt: fix unterminated-string-initialization warning + - drm/i915/xe2hpd: Identify the memory type for SKUs with GDDR + ECC + - drm/i915/dp: Reject HBR3 when sink doesn't support TPS4 + - drm/amdgpu: immediately use GTT for new allocations + - drm/amd/display: Do not enable Replay and PSR while VRR is on in + amdgpu_dm_commit_planes() + - drm/amd/display: Protect FPU in dml2_init()/dml21_init() + - drm/amd/display: Add HP Probook 445 and 465 to the quirk list for eDP on DP1 + - drm/xe/dma_buf: stop relying on placement in unmap + - drm/xe/userptr: fix notifier vs folio deadlock + - drm/xe: Set LRC addresses before guc load + - drm/i915/display: Add macro for checking 3 DSC engines + - drm/i915/dp: Check for HAS_DSC_3ENGINES while configuring DSC slices + - drm/amd/display/dml2: use vzalloc rather than kzalloc + - drm/amdgpu: fix warning of drm_mm_clean + - drm/mgag200: Fix value in register + - io_uring: don't post tag CQEs on file/buffer registration failure + - arm64/sysreg: Update register fields for ID_AA64MMFR0_EL1 + - arm64/sysreg: Add register fields for HDFGRTR2_EL2 + - arm64/sysreg: Add register fields for HDFGWTR2_EL2 + - arm64/sysreg: Add register fields for HFGITR2_EL2 + - arm64/sysreg: Add register fields for HFGRTR2_EL2 + - arm64/sysreg: Add register fields for HFGWTR2_EL2 + - arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9 + - cpufreq: Reference count policy in cpufreq_update_limits() + - scripts: generate_rust_analyzer: Add ffi crate + - platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1 + - platform/x86: alienware-wmi-wmax: Extend support to more laptops + - platform/x86: msi-wmi-platform: Rename "data" variable + - platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug + - drm/amd/display: Temporarily disable hostvm on DCN31 + - nvmet-fc: Remove unused functions + - mm/vma: add give_up_on_oom option on modify/merge, use in uffd release + - Revert "wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process" + - MIPS: dec: Declare which_prom() as static + - MIPS: cevt-ds1287: Add missing ds1287.h include + - MIPS: ds1287: Match ds1287_set_base_clock() function types + - wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process + - Linux 6.14.4 + + * Plucky update: v6.14.3 upstream stable release (LP: #2108854) + - ASoC: Intel: adl: add 2xrt1316 audio configuration + - cgroup/cpuset: Fix incorrect isolated_cpus update in + update_parent_effective_cpumask() + - cgroup/cpuset: Fix error handling in remote_partition_disable() + - cgroup/cpuset: Fix race between newly created partition and dying one + - tracing: fprobe: Cleanup fprobe hash when module unloading + - gpiolib: of: Fix the choice for Ingenic NAND quirk + - selftests/futex: futex_waitv wouldblock test should fail + - ublk: fix handling recovery & reissue in ublk_abort_queue() + - drm/virtio: Fix flickering issue seen with imported dmabufs + - drm/i915: Disable RPG during live selftest + - x86/acpi: Don't limit CPUs to 1 for Xen PV guests due to disabled ACPI + - net: ethtool: fix ethtool_ringparam_get_cfg() returns a hds_thresh value + always as 0. + - drm/xe/hw_engine: define sysfs_ops on all directories + - drm/xe: Restore EIO errno return when GuC PC start fails + - ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() + - objtool: Fix INSN_CONTEXT_SWITCH handling in validate_unret() + - tipc: fix memory leak in tipc_link_xmit + - codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() + - net: tls: explicitly disallow disconnect + - octeontx2-pf: qos: fix VF root node parent queue index + - tc: Ensure we have enough buffer space when sending filter netlink + notifications + - net: ethtool: Don't call .cleanup_data when prepare_data fails + - drm/tests: modeset: Fix drm_display_mode memory leak + - drm/tests: helpers: Create kunit helper to destroy a drm_display_mode + - drm/tests: cmdline: Fix drm_display_mode memory leak + - drm/tests: modes: Fix drm_display_mode memory leak + - drm/tests: probe-helper: Fix drm_display_mode memory leak + - net: libwx: handle page_pool_dev_alloc_pages error + - cifs: Fix support for WSL-style symlinks + - ata: sata_sx4: Add error handling in pdc20621_i2c_read() + - drm/i915/huc: Fix fence not released on early probe errors + - s390/cpumf: Fix double free on error in cpumf_pmu_event_init() + - nvmet-fcloop: swap list_add_tail arguments + - net_sched: sch_sfq: use a temporary work area for validating configuration + - net_sched: sch_sfq: move the limit validation + - x86/cpu: Avoid running off the end of an AMD erratum table + - smb: client: fix UAF in decryption with multichannel + - net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend() + - net: phy: allow MDIO bus PM ops to start/stop state machine for phylink- + controlled PHY + - ipv6: Align behavior across nexthops during path selection + - net: ppp: Add bound checking for skb data on ppp_sync_txmung + - nft_set_pipapo: fix incorrect avx2 match of 5th field octet + - ethtool: cmis_cdb: Fix incorrect read / write length extension + - iommu/exynos: Fix suspend/resume with IDENTITY domain + - iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group + - net: libwx: Fix the wrong Rx descriptor field + - perf/core: Simplify the perf_event_alloc() error path + - perf: Fix hang while freeing sigtrap event + - fs: consistently deref the files table with rcu_dereference_raw() + - umount: Allow superblock owners to force umount + - srcu: Force synchronization for srcu_get_delay() + - pm: cpupower: bench: Prevent NULL dereference on malloc failure + - irqchip/gic-v3: Add Rockchip 3568002 erratum workaround + - [Config] updateconfigs for ROCKCHIP_ERRATUM_3568002 + - x86/mm: Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW + - x86/percpu: Disable named address spaces for UBSAN_BOOL with KASAN for GCC < + 14.2 + - x86/ia32: Leave NULL selector values 0~3 unchanged + - x86/cpu: Don't clear X86_FEATURE_LAHF_LM flag in init_amd_k8() on AMD when + running in a virtual machine + - perf: arm_pmu: Don't disable counter in armpmu_add() + - perf/dwc_pcie: fix some unreleased resources + - perf/dwc_pcie: fix duplicate pci_dev devices + - PM: hibernate: Avoid deadlock in hibernate_compressor_param_set() + - Flush console log from kernel_power_off() + - cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend + - arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD + - xen/mcelog: Add __nonstring annotations for unterminated strings + - zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work + around compiler segfault + - tracing: Disable branch profiling in noinstr code + - platform/chrome: cros_ec_lpc: Match on Framework ACPI device + - ASoC: SOF: topology: Use krealloc_array() to replace krealloc() + - HID: pidff: Convert infinite length from Linux API to PID standard + - HID: pidff: Do not send effect envelope if it's empty + - HID: pidff: Add MISSING_DELAY quirk and its detection + - HID: pidff: Add MISSING_PBO quirk and its detection + - HID: pidff: Add PERMISSIVE_CONTROL quirk + - HID: pidff: Add hid_pidff_init_with_quirks and export as GPL symbol + - HID: pidff: Add FIX_WHEEL_DIRECTION quirk + - HID: Add hid-universal-pidff driver and supported device ids + - [Config] enable new hid-universal-pidff driver module + - HID: pidff: Add PERIODIC_SINE_ONLY quirk + - HID: pidff: Fix null pointer dereference in pidff_find_fields + - ASoC: amd: ps: use macro for ACP6.3 pci revision id + - ASoC: amd: amd_sdw: Add quirks for Dell SKU's + - ALSA: hda: intel: Fix Optimus when GPU has no sound + - ALSA: hda: intel: Add Lenovo IdeaPad Z570 to probe denylist + - ASoC: fsl_audmix: register card device depends on 'dais' property + - media: uvcvideo: Add quirk for Actions UVC05 + - HID: lenovo: Fix to ensure the data as __le32 instead of u32 + - media: s5p-mfc: Corrected NV12M/NV21M plane-sizes + - mmc: dw_mmc: add a quirk for accessing 64-bit FIFOs in two halves + - ALSA: usb-audio: Fix CME quirk for UF series keyboards + - ASoC: amd: Add DMI quirk for ACP6X mic support + - ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315 + - ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247 + - ASoC: amd: yc: update quirk data for new Lenovo model + - platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig + - wifi: ath9k: use unsigned long for activity check timestamp + - wifi: ath11k: Fix DMA buffer allocation to resolve SWIOTLB issues + - wifi: ath11k: fix memory leak in ath11k_xxx_remove() + - wifi: ath12k: fix memory leak in ath12k_pci_remove() + - wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process + - wifi: ath12k: Avoid memory leak while enabling statistics + - ata: libata-core: Add 'external' to the libata.force kernel parameter + - scsi: mpi3mr: Avoid reply queue full condition + - scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue + - net: page_pool: don't cast mp param to devmem + - f2fs: don't retry IO for corrupted data scenario + - wifi: mac80211: add strict mode disabling workarounds + - wifi: mac80211: ensure sdata->work is canceled before initialized. + - scsi: target: spc: Fix RSOC parameter data header size + - net: usb: asix_devices: add FiberGecko DeviceID + - page_pool: avoid infinite loop to schedule delayed worker + - can: flexcan: Add quirk to handle separate interrupt lines for mailboxes + - can: flexcan: add NXP S32G2/S32G3 SoC support + - jfs: Fix uninit-value access of imap allocated in the diMount() function + - fs/jfs: cast inactags to s64 to prevent potential overflow + - fs/jfs: Prevent integer overflow in AG size calculation + - jfs: Prevent copying of nlink with value 0 from disk inode + - jfs: add sanity check for agwidth in dbMount + - wifi: rtw88: Add support for Mercusys MA30N and D-Link DWA-T185 rev. A1 + - ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode + - net: sfp: add quirk for 2.5G OEM BX SFP + - wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi + - f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() + - net: sfp: add quirk for FS SFP-10GM-T copper SFP+ module + - ahci: add PCI ID for Marvell 88SE9215 SATA Controller + - ext4: protect ext4_release_dquot against freezing + - Revert "f2fs: rebuild nat_bits during umount" + - wifi: mac80211: fix userspace_selectors corruption + - ext4: ignore xattrs past end + - cdc_ether|r8152: ThinkPad Hybrid USB-C/A Dock quirk + - scsi: st: Fix array overflow in st_setup() + - ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI + - btrfs: harden block_group::bg_list against list_del() races + - wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table + - net: vlan: don't propagate flags on open + - tracing: fix return value in __ftrace_event_enable_disable for + TRACE_REG_UNREGISTER + - Bluetooth: btusb: Add new VID/PID for WCN785x + - Bluetooth: btintel_pcie: Add device id of Whale Peak + - Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x + - Bluetooth: hci_uart: fix race during initialization + - Bluetooth: btusb: Add 2 HWIDs for MT7922 + - Bluetooth: hci_qca: use the power sequencer for wcn6750 + - Bluetooth: qca: simplify WCN399x NVM loading + - Bluetooth: qca: add WCN3950 support + - drm: allow encoder mode_set even when connectors change for crtc + - drm/virtio: Set missing bo->attached flag + - drm/rockchip: Don't change hdmi reference clock rate + - drm/xe/ptl: Update the PTL pci id table + - drm/xe/pf: Don't send BEGIN_ID if VF has no context/doorbells + - drm/xe/vf: Don't try to trigger a full GT reset if VF + - drm/amd/display: Update Cursor request mode to the beginning prefetch always + - drm/amd/display: Guard Possible Null Pointer Dereference + - drm/amd/display: add workaround flag to link to force FFE preset + - drm/amdgpu: Unlocked unmap only clear page table leaves + - drm: panel-orientation-quirks: Add support for AYANEO 2S + - drm: panel-orientation-quirks: Add quirks for AYA NEO Flip DS and KB + - drm: panel-orientation-quirks: Add quirk for AYA NEO Slide + - drm: panel-orientation-quirks: Add new quirk for GPD Win 2 + - drm: panel-orientation-quirks: Add quirk for OneXPlayer Mini (Intel) + - drm/debugfs: fix printk format for bridge index + - drm/bridge: panel: forbid initializing a panel with unknown connector type + - drm/amd/display: Update FIXED_VS Link Rate Toggle Workaround Usage + - drm/amd/display: stop DML2 from removing pipes based on planes + - drivers: base: devres: Allow to release group on device release + - drm/amdkfd: clamp queue size to minimum + - drm/amdkfd: Fix mode1 reset crash issue + - drm/amdkfd: Fix pqm_destroy_queue race with GPU reset + - drm/amdkfd: debugfs hang_hws skip GPU with MES + - drm/xe/xelp: Move Wa_16011163337 from tunings to workarounds + - drm/mediatek: mtk_dpi: Move the input_2p_en bit to platform data + - drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off + - drm/rockchip: stop passing non struct drm_device to drm_err() and friends + - PCI: Add Rockchip Vendor ID + - drm/amdgpu: handle amdgpu_cgs_create_device() errors in + amd_powerplay_create() + - drm/amd/display: Prevent VStartup Overflow + - PCI: Enable Configuration RRS SV early + - drm/amdgpu: Fix the race condition for draining retry fault + - PCI: Check BAR index for validity + - PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type + - drm/amdgpu: grab an additional reference on the gang fence v2 + - fbdev: omapfb: Add 'plane' value check + - tracing: probe-events: Log error for exceeding the number of arguments + - tracing: probe-events: Add comments about entry data storing code + - ktest: Fix Test Failures Due to Missing LOG_FILE Directories + - tpm, tpm_tis: Workaround failed command reception on Infineon devices + - tpm: End any active auth session before shutdown + - pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config() + - pwm: rcar: Improve register calculation + - pwm: fsl-ftm: Handle clk_get_rate() returning 0 + - pwm: stm32: Search an appropriate duty_cycle if period cannot be modified + - erofs: set error to bio if file-backed IO fails + - bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags + - ext4: don't treat fhandle lookup of ea_inode as FS corruption + - s390/pci: Fix s390_mmio_read/write syscall page fault handling + - HID: pidff: Clamp PERIODIC effect period to device's logical range + - HID: pidff: Stop all effects before enabling actuators + - HID: pidff: Completely rework and fix pidff_reset function + - HID: pidff: Simplify pidff_upload_effect function + - HID: pidff: Define values used in pidff_find_special_fields + - HID: pidff: Rescale time values to match field units + - HID: pidff: Factor out code for setting gain + - HID: pidff: Move all hid-pidff definitions to a dedicated header + - HID: pidff: Simplify pidff_rescale_signed + - HID: pidff: Use macros instead of hardcoded min/max values for shorts + - HID: pidff: Factor out pool report fetch and remove excess declaration + - HID: pidff: Make sure to fetch pool before checking SIMULTANEOUS_MAX + - HID: hid-universal-pidff: Add Asetek wheelbases support + - HID: pidff: Comment and code style update + - HID: pidff: Support device error response from PID_BLOCK_LOAD + - HID: pidff: Remove redundant call to pidff_find_special_keys + - HID: pidff: Rename two functions to align them with naming convention + - HID: pidff: Clamp effect playback LOOP_COUNT value + - HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff + - HID: pidff: Fix 90 degrees direction name North -> East + - HID: pidff: Fix set_device_control() + - auxdisplay: hd44780: Fix an API misuse in hd44780.c + - dt-bindings: media: st,stmipid02: correct lane-polarities maxItems + - media: mediatek: vcodec: Fix a resource leak related to the scp device in FW + initialization + - media: mtk-vcodec: venc: avoid -Wenum-compare-conditional warning + - media: uapi: rkisp1-config: Fix typo in extensible params example + - media: mgb4: Fix CMT registers update logic + - media: i2c: adv748x: Fix test pattern selection mask + - media: mgb4: Fix switched CMT frequency range "magic values" sets + - media: intel/ipu6: set the dev_parent of video device to pdev + - media: venus: hfi: add a check to handle OOB in sfr region + - media: venus: hfi: add check to handle incorrect queue size + - media: vim2m: print device name after registering device + - media: siano: Fix error handling in smsdvb_module_init() + - media: rockchip: rga: fix rga offset lookup + - xenfs/xensyms: respect hypervisor's "next" indication + - KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, + PMOVS{SET,CLR} + - arm64: cputype: Add MIDR_CORTEX_A76AE + - arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list + - arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB + - arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list + - KVM: arm64: Tear down vGIC on failed vCPU creation + - KVM: arm64: Set HCR_EL2.TID1 unconditionally + - spi: cadence-qspi: Fix probe on AM62A LP SK + - mtd: rawnand: brcmnand: fix PM resume warning + - tpm, tpm_tis: Fix timeout handling when waiting for TPM status + - accel/ivpu: Fix PM related deadlocks in MS IOCTLs + - media: ov08x40: Properly turn sensor on/off when runtime-suspended + - media: streamzap: prevent processing IR data on URB failure + - media: hi556: Fix memory leak (on error) in hi556_check_hwcfg() + - media: visl: Fix ERANGE error when setting enum controls + - media: platform: stm32: Add check for clk_enable() + - media: xilinx-tpg: fix double put in xtpg_parse_of() + - media: imx219: Adjust PLL settings based on the number of MIPI lanes + - media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf() + - Revert "media: imx214: Fix the error handling in imx214_probe()" + - media: i2c: ccs: Set the device's runtime PM status correctly in remove + - media: i2c: ccs: Set the device's runtime PM status correctly in probe + - media: i2c: ov7251: Set enable GPIO low in probe + - media: i2c: ov7251: Introduce 1 ms delay between regulators and en GPIO + - media: nuvoton: Fix reference handling of ece_node + - media: nuvoton: Fix reference handling of ece_pdev + - media: venus: hfi_parser: add check to avoid out of bound access + - media: venus: hfi_parser: refactor hfi packet parsing logic + - media: i2c: imx319: Rectify runtime PM handling probe and remove + - media: i2c: imx219: Rectify runtime PM handling in probe and remove + - media: i2c: imx214: Rectify probe error handling related to runtime PM + - media: chips-media: wave5: Fix gray color on screen + - media: chips-media: wave5: Avoid race condition in the interrupt handler + - media: chips-media: wave5: Fix a hang after seeking + - media: chips-media: wave5: Fix timeout while testing 10bit hevc fluster + - irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type() + - mptcp: sockopt: fix getting IPV6_V6ONLY + - mptcp: sockopt: fix getting freebind & transparent + - block: make sure ->nr_integrity_segments is cloned in blk_rq_prep_clone + - mtd: Add check for devm_kcalloc() + - net: dsa: mv88e6xxx: workaround RGMII transmit delay erratum for 6320 family + - net: dsa: mv88e6xxx: fix internal PHYs for 6320 family + - mtd: Replace kcalloc() with devm_kcalloc() + - clocksource/drivers/stm32-lptimer: Use wakeup capable instead of init wakeup + - Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO" + - wifi: mt76: Add check for devm_kstrdup() + - wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series + - wifi: mac80211: fix integer overflow in hwmp_route_info_get() + - wifi: mt76: mt7925: ensure wow pattern command align fw format + - wifi: mt76: mt7925: fix country count limitation for CLC + - wifi: mt76: mt7925: fix the wrong link_idx when a p2p_device is present + - wifi: mt76: mt7925: fix the wrong simultaneous cap for MLO + - wifi: mt76: mt7925: adjust rm BSS flow to prevent next connection failure + - wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd + - wifi: mt76: mt7925: update the power-saving flow + - scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag + - net: stmmac: Fix accessing freed irq affinity_hint + - io_uring/net: fix accept multishot handling + - io_uring/net: fix io_req_post_cqe abuse by send bundle + - io_uring/kbuf: reject zero sized provided buffers + - ASoC: codecs: wcd937x: fix a potential memory leak in + wcd937x_soc_codec_probe() + - ASoC: q6apm: add q6apm_get_hw_pointer helper + - ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs + - ASoC: q6apm-dai: make use of q6apm_get_hw_pointer + - ASoC: qdsp6: q6apm-dai: set 10 ms period and buffer alignment. + - ASoC: qdsp6: q6apm-dai: fix capture pipeline overruns. + - ASoC: qdsp6: q6asm-dai: fix q6asm_dai_compr_set_params error path + - ALSA: hda/realtek: Enable Mute LED on HP OMEN 16 Laptop xd000xx + - accel/ivpu: Fix warning in ivpu_ipc_send_receive_internal() + - accel/ivpu: Fix deadlock in ivpu_ms_cleanup() + - arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() + - arm64/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() + - bus: mhi: host: Fix race between unprepare and queue_buf + - ext4: fix off-by-one error in do_split + - f2fs: fix the missing write pointer correction + - f2fs: fix to avoid atomicity corruption of atomic file + - vdpa/mlx5: Fix oversized null mkey longer than 32bit + - udf: Fix inode_getblk() return value + - tpm: do not start chip while suspended + - svcrdma: do not unregister device for listeners + - soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() + - smb311 client: fix missing tcon check when mounting with linux/posix + extensions + - ima: limit the number of open-writers integrity violations + - ima: limit the number of ToMToU integrity violations + - igc: Fix XSK queue NAPI ID mapping + - i3c: master: svc: Use readsb helper for reading MDB + - i3c: Add NULL pointer check in i3c_master_queue_ibi() + - jbd2: remove wrong sb->s_sequence check + - kbuild: exclude .rodata.(cst|str)* when building ranges + - kbuild: Add '-fno-builtin-wcslen' + - leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs + - leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs + - mfd: ene-kb3930: Fix a potential NULL pointer dereference + - mailbox: tegra-hsp: Define dimensioning masks in SoC data + - locking/lockdep: Decrease nr_unused_locks if lock unused in zap_class() + - lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets + - mptcp: fix NULL pointer in can_accept_new_subflow + - mptcp: only inc MPJoinAckHMacFailure for HMAC failures + - mtd: inftlcore: Add error check for inftl_read_oob() + - mtd: rawnand: Add status chack in r852_ready() + - mtd: spinand: Fix build with gcc < 7.5 + - arm64: mops: Do not dereference src reg for a set operation + - arm64: tegra: Remove the Orin NX/Nano suspend key + - arm64: mm: Correct the update of max_pfn + - arm64: dts: ti: k3-j784s4-j742s2-main-common: Correct the GICD size + - arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks + - arm64: dts: mediatek: mt8188: Assign apll1 clock as parent to avoid hang + - arm64: dts: mediatek: mt8173: Fix disp-pwm compatible string + - arm64: dts: exynos: gs101: disable pinctrl_gsacore node + - backlight: led_bl: Hold led_access lock when calling led_sysfs_disable() + - btrfs: fix non-empty delayed iputs list on unmount due to compressed write + workers + - btrfs: tests: fix chunk map leak after failure to add it to the tree + - btrfs: zoned: fix zone activation with missing devices + - btrfs: zoned: fix zone finishing with missing devices + - iommufd: Fix uninitialized rc in iommufd_access_rw() + - iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() + - iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled + - iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes + - iommu/vt-d: Fix possible circular locking dependency + - iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs + - sparc/mm: disable preemption in lazy mmu mode + - sparc/mm: avoid calling arch_enter/leave_lazy_mmu() in set_ptes + - net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. + - mm/damon/ops: have damon_get_folio return folio even for tail pages + - mm/damon: avoid applying DAMOS action to same entity multiple times + - mm/rmap: reject hugetlb folios in folio_make_device_exclusive() + - mm: make page_mapped_in_vma() hugetlb walk aware + - mm: fix lazy mmu docs and usage + - mm/mremap: correctly handle partial mremap() of VMA starting at 0 + - mm: add missing release barrier on PGDAT_RECLAIM_LOCKED unlock + - mm/userfaultfd: fix release hang over concurrent GUP + - mm/hwpoison: do not send SIGBUS to processes with recovered clean pages + - mm/hugetlb: move hugetlb_sysctl_init() to the __init section + - mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper + - sctp: detect and prevent references to a freed transport in sendmsg + - x86/xen: fix balloon target initialization for PVH dom0 + - uprobes: Avoid false-positive lockdep splat on CONFIG_PREEMPT_RT=y in the + ri_timer() uprobe timer callback, use raw_write_seqcount_*() + - tracing: fprobe: Fix to lock module while registering fprobe + - tracing: fprobe events: Fix possible UAF on modules + - tracing: Do not add length to print format in synthetic events + - thermal/drivers/rockchip: Add missing rk3328 mapping entry + - CIFS: Propagate min offload along with other parameters from primary to + secondary channels. + - cifs: avoid NULL pointer dereference in dbg call + - cifs: fix integer overflow in match_server() + - cifs: Ensure that all non-client-specific reparse points are processed by + the server + - clk: renesas: r9a07g043: Fix HP clock source for RZ/Five + - clk: qcom: clk-branch: Fix invert halt status bit check for votable clocks + - clk: qcom: gdsc: Release pm subdomains in reverse add order + - clk: qcom: gdsc: Capture pm_genpd_add_subdomain result code + - clk: qcom: gdsc: Set retain_ff before moving to HW CTRL + - crypto: ccp - Fix check for the primary ASP device + - crypto: ccp - Fix uAPI definitions of PSP errors + - dlm: fix error if inactive rsb is not hashed + - dlm: fix error if active rsb is not hashed + - dm-ebs: fix prefetch-vs-suspend race + - dm-integrity: set ti->error on memory allocation failure + - dm-integrity: fix non-constant-time tag verification + - dm-verity: fix prefetch-vs-suspend race + - dt-bindings: coresight: qcom,coresight-tpda: Fix too many 'reg' + - dt-bindings: coresight: qcom,coresight-tpdm: Fix too many 'reg' + - firmware: cs_dsp: test_control_parse: null-terminate test strings + - ftrace: Add cond_resched() to ftrace_graph_set_hash() + - ftrace: Properly merge notrace hashes + - fuse: {io-uring} Fix a possible req cancellation race + - gpio: mpc8xxx: Fix wakeup source leaks on device unbind + - gpio: tegra186: fix resource handling in ACPI probe path + - gpio: zynq: Fix wakeup source leaks on device unbind + - gve: handle overflow when reporting TX consumed descriptors + - KVM: Allow building irqbypass.ko as as module when kvm.ko is a module + - [Config] updateconfigs for HAVE_KVM_IRQ_BYPASS + - KVM: x86: Explicitly zero-initialize on-stack CPUID unions + - KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses + - landlock: Move code to ease future backports + - landlock: Add the errata interface + - landlock: Add erratum for TCP fix + - landlock: Always allow signals between threads of the same process + - landlock: Prepare to add second errata + - selftests/landlock: Split signal_scoping_threads tests + - selftests/landlock: Add a new test for setuid() + - misc: pci_endpoint_test: Avoid issue of interrupts remaining after + request_irq error + - misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error + - misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type + - net: mana: Switch to page pool for jumbo frames + - ntb: use 64-bit arithmetic for the MSI doorbell mask + - of/irq: Fix device node refcount leakage in API of_irq_parse_one() + - of/irq: Fix device node refcount leakage in API of_irq_parse_raw() + - of/irq: Fix device node refcount leakages in of_irq_count() + - of/irq: Fix device node refcount leakage in API irq_of_parse_and_map() + - of/irq: Fix device node refcount leakages in of_irq_init() + - PCI: brcmstb: Fix missing of_node_put() in brcm_pcie_probe() + - PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 + - PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() + - PCI: pciehp: Avoid unnecessary device replacement check + - PCI: Fix reference leak in pci_alloc_child_bus() + - PCI: Fix reference leak in pci_register_host_bridge() + - PCI: Fix wrong length of devres array + - phy: freescale: imx8m-pcie: assert phy reset and perst in power off + - pinctrl: qcom: Clear latched interrupt status when changing IRQ type + - pinctrl: samsung: add support for eint_fltcon_offset + - ring-buffer: Use flush_kernel_vmap_range() over flush_dcache_folio() + - s390/pci: Fix zpci_bus_is_isolated_vf() for non-VFs + - s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues + - s390: Fix linker error when -no-pie option is unavailable + - sched_ext: create_dsq: Return -EEXIST on duplicate request + - selftests: mptcp: close fd_in before returning in main_loop + - selftests: mptcp: fix incorrect fd checks in main_loop + - spi: fsl-qspi: use devm function instead of driver remove + - spi: fsl-qspi: Fix double cleanup in probe error path + - thermal/drivers/mediatek/lvts: Disable monitor mode during suspend + - thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold + - wifi: ath11k: update channel list in worker when wait flag is set + - arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists + - iommufd: Make attach_handle generic than fault specific + - iommufd: Fail replace if device has not been attached + - x86/e820: Fix handling of subpage regions when calculating nosave ranges in + e820__register_nosave_regions() + - Bluetooth: hci_uart: Fix another race during initialization + - Linux 6.14.3 + + * Plucky update: v6.14.3 upstream stable release (LP: #2108854) // + CVE-2025-37838 + - HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver + Due to Race Condition + + * Introduce configfs-based interface for gpio-aggregator (LP: #2103496) + - SAUCE: gpio: aggregator: fix "_sysfs" prefix check in + gpio_aggregator_make_group() + - SAUCE: gpio: aggregator: Fix gpio_aggregator_line_alloc() checking + - SAUCE: gpio: aggregator: Return an error if there are no GPIOs in + gpio_aggregator_parse() + - SAUCE: gpio: aggregator: Fix error code in gpio_aggregator_activate() + - SAUCE: gpio: aggregator: Fix leak in gpio_aggregator_parse() + - SAUCE: selftests: gpio: gpio-aggregator: add a test case for _sysfs prefix + reservation + + * [SRU] Fix screen flickering in inverted display mode (LP: #2103617) + - drm/xe/display: Fix fbdev GGTT mapping handling. + + * System could not hit hardware sleep state with specific panel with AMD + KRK/STX under DC mode (LP: #2103480) + - drm/amd/display: Add and use new dm_prepare_suspend() callback + + * WARNING: CPU: 18 PID: 3683 at arch/powerpc/kvm/../../../virt/kvm/vfio.c Call + Traces seen when pci device is detached from the kvm guest (LP: #2104893) + - KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests + + * [SRU] Enable speaker/mic mute LEDs on Lenovo ideapad and thinkbook + (LP: #2106449) + - platform/x86:lenovo-wmi-hotkey-utilities.c: Support for mic and audio mute + LEDs + - [Config] Enable Lenovo wmi hotkey driver + + * OLED panel screen backlight brightness does not change with brightness + hotkey(F6&F7 Key) (LP: #2097818) + - drm/dp: Add eDP 1.5 bit definition + - drm/dp: Increase eDP display control capability size + - drm/i915/backlight: Use proper interface based on eDP version + - drm/i915/backlight: Check Luminance based brightness control for VESA + - drm/i915/backlight: Modify function to get VESA brightness in Nits + - drm/i915/backlight: Add function to change brightness in nits for VESA + - drm/i915/backlight: Setup nits based luminance via VESA + - drm/i915/backlight: Enable nits based luminance + + * Plucky update: v6.14.2 upstream stable release (LP: #2107212) + - fs: support O_PATH fds with FSCONFIG_SET_FD + - watch_queue: fix pipe accounting mismatch + - x86/mm/pat: cpa-test: fix length for CPA_ARRAY test + - m68k: sun3: Use str_read_write() helper in mmu_emu_handle_fault() + - m68k: sun3: Fix DEBUG_MMU_EMU build + - cpufreq: scpi: compare kHz instead of Hz + - seccomp: fix the __secure_computing() stub for !HAVE_ARCH_SECCOMP_FILTER + - smack: dont compile ipv6 code unless ipv6 is configured + - smack: ipv4/ipv6: tcp/dccp/sctp: fix incorrect child socket label + - sched: Cancel the slice protection of the idle entity + - sched/eevdf: Force propagating min_slice of cfs_rq when {en,de}queue tasks + - cpufreq: governor: Fix negative 'idle_time' handling in dbs_update() + - EDAC/igen6: Fix the flood of invalid error reports + - EDAC/{skx_common,i10nm}: Fix some missing error reports on Emerald Rapids + - x86/vdso: Fix latent bug in vclock_pages calculation + - x86/fpu: Fix guest FPU state buffer allocation size + - cpufreq/amd-pstate: Modify the min_perf calculation in adjust_perf callback + - cpufreq/amd-pstate: Pass min/max_limit_perf as min/max_perf to + amd_pstate_update + - cpufreq/amd-pstate: Convert all perf values to u8 + - cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_update + - x86/fpu: Avoid copying dynamic FP state from init_task in + arch_dup_task_struct() + - rseq: Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y + - x86/platform: Only allow CONFIG_EISA for 32-bit + - [Config] updateconfigs for HAVE_EISA + - x86/sev: Add missing RIP_REL_REF() invocations during sme_enable() + - lockdep/mm: Fix might_fault() lockdep check of current->mm->mmap_lock + - PM: sleep: Adjust check before setting power.must_resume + - cpufreq: tegra194: Allow building for Tegra234 + - RISC-V: KVM: Disable the kernel perf counter during configure + - kunit/stackinit: Use fill byte different from Clang i386 pattern + - watchdog/hardlockup/perf: Fix perf_event memory leak + - x86/split_lock: Fix the delayed detection logic + - selinux: Chain up tool resolving errors in install_policy.sh + - EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer + - EDAC/ie31200: Fix the DIMM size mask for several SoCs + - EDAC/ie31200: Fix the error path order of ie31200_init() + - dma: Fix encryption bit clearing for dma_to_phys + - dma: Introduce generic dma_addr_*crypted helpers + - arm64: realm: Use aliased addresses for device DMA to shared buffers + - x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors + - cpuidle: Init cpuidle only for present CPUs + - thermal: int340x: Add NULL check for adev + - PM: sleep: Fix handling devices with direct_complete set on errors + - lockdep: Don't disable interrupts on RT in disable_irq_nosync_lockdep.*() + - cpufreq: Init cpufreq only for present CPUs + - perf/ring_buffer: Allow the EPOLLRDNORM flag for poll + - perf: Save PMU specific data in task_struct + - perf: Supply task information to sched_task() + - perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode + - sched/deadline: Ignore special tasks when rebuilding domains + - sched/topology: Wrappers for sched_domains_mutex + - sched/deadline: Generalize unique visiting of root domains + - sched/deadline: Rebuild root domain accounting after every update + - x86/traps: Make exc_double_fault() consistently noreturn + - x86/fpu/xstate: Fix inconsistencies in guest FPU xfeatures + - x86/entry: Add __init to ia32_emulation_override_cmdline() + - RISC-V: KVM: Teardown riscv specific bits after kvm_exit + - regulator: pca9450: Fix enable register for LDO5 + - auxdisplay: MAX6959 should select BITREVERSE + - media: verisilicon: HEVC: Initialize start_bit field + - media: platform: allgro-dvt: unregister v4l2_device on the error path + - auxdisplay: panel: Fix an API misuse in panel.c + - platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: Make symbol static + - platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static + - platform/x86: dell-ddv: Fix temperature calculation + - ASoC: cs35l41: check the return value from spi_setup() + - ASoC: amd: acp: Fix for enabling DMIC on acp platforms via _DSD entry + - HID: remove superfluous (and wrong) Makefile entry for + CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER + - ASoC: simple-card-utils: Don't use __free(device_node) at + graph_util_parse_dai() + - dt-bindings: vendor-prefixes: add GOcontroll + - ALSA: hda/realtek: Always honor no_shutup_pins + - ASoC: tegra: Use non-atomic timeout for ADX status register + - ASoC: ti: j721e-evm: Fix clock configuration for ti,j7200-cpb-audio + compatible + - ALSA: usb-audio: separate DJM-A9 cap lvl options + - ALSA: timer: Don't take register_mutex with copy_from/to_user() + - ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA + - wifi: rtw89: Correct immediate cfg_len calculation for scan_offload_be + - wifi: ath12k: fix skb_ext_desc leak in ath12k_dp_tx() error path + - wifi: ath12k: encode max Tx power in scan channel list command + - wifi: ath12k: Fix pdev lookup in WBM error processing + - wifi: ath9k: do not submit zero bytes to the entropy pool + - wifi: ath11k: fix wrong overriding for VHT Beamformee STS Capability + - arm64: dts: mediatek: mt8173-elm: Drop pmic's #address-cells and #size-cells + - arm64: dts: mediatek: mt8173: Fix some node names + - wifi: ath11k: update channel list in reg notifier instead reg worker + - ARM: dts: omap4-panda-a4: Add missing model and compatible properties + - f2fs: quota: fix to avoid warning in dquot_writeback_dquots() + - dlm: prevent NPD when writing a positive value to event_done + - wifi: ath11k: fix RCU stall while reaping monitor destination ring + - wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode + - wifi: ath12k: Fix locking in "QMI firmware ready" error paths + - f2fs: fix to avoid panic once fallocation fails for pinfile + - scsi: mpt3sas: Reduce log level of ignore_delay_remove message to KERN_INFO + - md: ensure resync is prioritized over recovery + - md/raid1: fix memory leak in raid1_run() if no active rdev + - coredump: Fixes core_pipe_limit sysctl proc_handler + - io_uring/io-wq: eliminate redundant io_work_get_acct() calls + - io_uring/io-wq: cache work->flags in variable + - io_uring/io-wq: do not use bogus hash value + - io_uring: check for iowq alloc_workqueue failure + - io_uring/net: improve recv bundles + - firmware: arm_ffa: Refactor addition of partition information into XArray + - firmware: arm_ffa: Unregister the FF-A devices when cleaning up the + partitions + - arm64: dts: mediatek: mt6359: fix dtbs_check error for audio-codec + - scsi: mpi3mr: Fix locking in an error path + - scsi: mpt3sas: Fix a locking bug in an error path + - can: rockchip_canfd: rkcanfd_chip_fifo_setup(): remove duplicated setup of + RX FIFO + - jfs: reject on-disk inodes of an unsupported type + - jfs: add check read-only before txBeginAnon() call + - jfs: add check read-only before truncation in jfs_truncate_nolock() + - wifi: ath12k: Add missing htt_metadata flag in ath12k_dp_tx() + - wifi: rtw89: rtw8852b{t}: fix TSSI debug timestamps + - xfrm: delay initialization of offload path till its actually requested + - iommu/io-pgtable-dart: Only set subpage protection disable for DART 1 + - firmware: arm_ffa: Explicitly cast return value from FFA_VERSION before + comparison + - firmware: arm_ffa: Explicitly cast return value from NOTIFICATION_INFO_GET + - arm64: dts: renesas: r8a774c0: Re-add voltages to OPP table + - arm64: dts: renesas: r8a77990: Re-add voltages to OPP table + - firmware: arm_ffa: Skip the first/partition ID when parsing vCPU list + - arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C + - wifi: ath12k: use link specific bss_conf as well in + ath12k_mac_vif_cache_flush() + - arm64: dts: imx8mp-skov: correct PMIC board limits + - arm64: dts: imx8mp-skov: operate CPU at 850 mV by default + - arm64: dts: mediatek: mt8390-genio-700-evk: Move common parts to dtsi + - arm64: dts: mediatek: mt8390-genio-common: Fix duplicated regulator name + - wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in + error path + - wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in + error path + - f2fs: fix to set .discard_granularity correctly + - f2fs: add check for deleted inode + - arm64: dts: ti: k3-am62-verdin-dahlia: add Microphone Jack to sound card + - f2fs: fix potential deadloop in prepare_compress_overwrite() + - f2fs: fix to call f2fs_recover_quota_end() correctly + - md: fix mddev uaf while iterating all_mddevs list + - md/raid1,raid10: don't ignore IO flags + - md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb + - tracing: Fix DECLARE_TRACE_CONDITION + - tools/rv: Keep user LDFLAGS in build + - arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx + - arm64: dts: ti: k3-am62p: fix pinctrl settings + - arm64: dts: ti: k3-j722s: fix pinctrl settings + - wifi: rtw89: fw: correct debug message format in + rtw89_build_txpwr_trk_tbl_from_elm() + - wifi: rtw89: pci: correct ISR RDU bit for 8922AE + - blk-throttle: fix lower bps rate by throtl_trim_slice() + - soc: mediatek: mtk-mmsys: Fix MT8188 VDO1 DPI1 output selection + - soc: mediatek: mt8167-mmsys: Fix missing regval in all entries + - soc: mediatek: mt8365-mmsys: Fix routing table masks and values + - md/raid10: wait barrier before returning discard request with REQ_NOWAIT + - block: ensure correct integrity capability propagation in stacked devices + - block: Correctly initialize BLK_INTEGRITY_NOGENERATE and + BLK_INTEGRITY_NOVERIFY + - badblocks: Fix error shitf ops + - badblocks: factor out a helper try_adjacent_combine + - badblocks: attempt to merge adjacent badblocks during ack_all_badblocks + - badblocks: return error directly when setting badblocks exceeds 512 + - badblocks: return error if any badblock set fails + - badblocks: fix the using of MAX_BADBLOCKS + - badblocks: fix merge issue when new badblocks align with pre+1 + - badblocks: fix missing bad blocks on retry in _badblocks_check() + - badblocks: return boolean from badblocks_set() and badblocks_clear() + - badblocks: use sector_t instead of int to avoid truncation of badblocks + length + - firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo() + - net: airoha: Fix lan4 support in airoha_qdma_get_gdm_port() + - iommu/amd: Fix header file + - iommu/vt-d: Fix system hang on reboot -f + - memory: mtk-smi: Add ostd setting for mt8192 + - gfs2: minor evict fix + - gfs2: skip if we cannot defer delete + - ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node + - arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block + - arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz + - f2fs: fix to avoid accessing uninitialized curseg + - iommu: Handle race with default domain setup + - wifi: mac80211: remove SSID from ML reconf + - f2fs: fix to avoid running out of free segments + - block: fix adding folio to bio + - ext4: fix potential null dereference in ext4 kunit test + - ext4: convert EXT4_FLAGS_* defines to enum + - ext4: add EXT4_FLAGS_EMERGENCY_RO bit + - ext4: correct behavior under errors=remount-ro mode + - ext4: show 'emergency_ro' when EXT4_FLAGS_EMERGENCY_RO is set + - arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory + - arm64: dts: rockchip: Remove bluetooth node from rock-3a + - bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls + - bus: qcom-ssc-block-bus: Fix the error handling path of + qcom_ssc_block_bus_probe() + - arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max + - arm64: dts: rockchip: Fix PWM pinctrl names + - arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0 + - erofs: allow 16-byte volume name again + - ext4: add missing brelse() for bh2 in ext4_dx_add_entry() + - ext4: verify fast symlink length + - f2fs: fix missing discard for active segments + - scsi: hisi_sas: Fixed failure to issue vendor specific commands + - scsi: target: tcm_loop: Fix wrong abort tag + - ext4: introduce ITAIL helper + - ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all() + - ext4: goto right label 'out_mmap_sem' in ext4_setattr() + - jbd2: fix off-by-one while erasing journal + - ata: libata: Fix NCQ Non-Data log not supported print + - wifi: nl80211: store chandef on the correct link when starting CAC + - wifi: mac80211: check basic rates validity in sta_link_apply_parameters + - wifi: cfg80211: init wiphy_work before allocating rfkill fails + - wifi: mwifiex: Fix premature release of RF calibration data. + - wifi: mwifiex: Fix RF calibration data download from file + - ice: health.c: fix compilation on gcc 7.5 + - ice: ensure periodic output start time is in the future + - ice: fix reservation of resources for RDMA when disabled + - virtchnl: make proto and filter action count unsigned + - ice: stop truncating queue ids when checking + - ice: validate queue quanta parameters to prevent OOB access + - ice: fix input validation for virtchnl BW + - ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw() + - idpf: check error for register_netdev() on init + - btrfs: get used bytes while holding lock at btrfs_reclaim_bgs_work() + - btrfs: fix reclaimed bytes accounting after automatic block group reclaim + - btrfs: fix block group refcount race in btrfs_create_pending_block_groups() + - btrfs: don't clobber ret in btrfs_validate_super() + - wifi: mt76: mt7915: fix possible integer overflows in + mt7915_muru_stats_show() + - igb: reject invalid external timestamp requests for 82580-based HW + - renesas: reject PTP_STRICT_FLAGS as unsupported + - net: lan743x: reject unsupported external timestamp requests + - broadcom: fix supported flag check in periodic output function + - ptp: ocp: reject unsupported periodic output flags + - nvmet: pci-epf: Always configure BAR0 as 64-bit + - jbd2: add a missing data flush during file and fs synchronization + - ext4: define ext4_journal_destroy wrapper + - ext4: avoid journaling sb update on error if journal is destroying + - eth: bnxt: fix out-of-range access of vnic_info array + - net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. + - netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error + - netfilter: nf_tables: Only use nf_skip_indirect_calls() when + MITIGATION_RETPOLINE + - ax25: Remove broken autobind + - net/mlx5e: Fix ethtool -N flow-type ip4 to RSS context + - bnxt_en: Mask the bd_cnt field in the TX BD properly + - bnxt_en: Linearize TX SKB if the fragments exceed the max + - net: dsa: mv88e6xxx: fix atu_move_port_mask for 6341 family + - net: dsa: mv88e6xxx: enable PVT for 6321 switch + - net: dsa: mv88e6xxx: enable .port_set_policy() for 6320 family + - net: dsa: mv88e6xxx: fix VTU methods for 6320 family + - net: dsa: mv88e6xxx: enable STU methods for 6320 family + - mlxsw: spectrum_acl_bloom_filter: Workaround for some LLVM versions + - net: dsa: sja1105: fix displaced ethtool statistics counters + - net: dsa: sja1105: reject other RX filters than + HWTSTAMP_FILTER_PTP_V2_L2_EVENT + - net: dsa: sja1105: fix kasan out-of-bounds warning in + sja1105_table_delete_entry() + - net/mlx5: LAG, reload representors on LAG creation failure + - net/mlx5: Start health poll after enable hca + - vmxnet3: unregister xdp rxq info in the reset path + - bonding: check xdp prog when set bond mode + - ibmvnic: Use kernel helpers for hex dumps + - net: fix NULL pointer dereference in l3mdev_l3_rcv + - virtio_net: Fix endian with virtio_net_ctrl_rss + - Bluetooth: Add quirk for broken READ_VOICE_SETTING + - Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE + - Bluetooth: btusb: Fix regression in the initialization of fake Bluetooth + controllers + - Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO + - Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel + - rwonce: handle KCSAN like KASAN in read_word_at_a_time() + - net: dsa: microchip: fix DCB apptrust configuration on KSZ88x3 + - Bluetooth: btnxpuart: Fix kernel panic during FW release + - Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT + - net: Fix the devmem sock opts and msgs for parisc + - net: libwx: fix Tx descriptor content for some tunnel packets + - net: libwx: fix Tx L4 checksum + - rwonce: fix crash by removing READ_ONCE() for unaligned read + - drm/bridge: ti-sn65dsi86: Fix multiple instances + - drm/ssd130x: Set SPI .id_table to prevent an SPI core warning + - accel/amdxdna: Return error when setting clock failed for npu1 + - drm/panthor: Fix a race between the reset and suspend path + - drm/ssd130x: fix ssd132x encoding + - drm/ssd130x: ensure ssd132x pitch is correct + - drm/dp_mst: Fix drm RAD print + - drm/bridge: it6505: fix HDCP V match check is not performed correctly + - drm/panthor: Fix race condition when gathering fdinfo group samples + - drm: xlnx: zynqmp: Fix max dma segment size + - drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init + - drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set() + - drm/vkms: Fix use after free and double free on init error + - gpu: cdns-mhdp8546: fix call balance of mhdp->clk handling routines + - drm/amdgpu: refine smu send msg debug log format + - drm/amdgpu/umsch: remove vpe test from umsch + - drm/amdgpu/umsch: declare umsch firmware + - drm/amdgpu/umsch: fix ucode check + - drm/amdgpu/vcn5.0.1: use correct dpm helper + - PCI: Use downstream bridges for distributing resources + - PCI: Remove add_align overwrite unrelated to size0 + - PCI: Simplify size1 assignment logic + - PCI: Allow relaxed bridge window tail sizing for optional resources + - drm/mediatek: mtk_hdmi: Unregister audio platform device on failure + - drm/mediatek: mtk_hdmi: Fix typo for aud_sampe_size member + - drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid + Priority Inversion in SRIOV + - PCI/ASPM: Fix link state exit during switch upstream function removal + - drm/panel: ilitek-ili9882t: fix GPIO name in error message + - PCI/ACS: Fix 'pci=config_acs=' parameter + - drm/amd/display: fix an indent issue in DML21 + - drm/msm/dpu: don't use active in atomic_check() + - drm/msm/dsi/phy: Program clock inverters in correct register + - drm/msm/dsi: Use existing per-interface slice count in DSC timing + - drm/msm/dsi: Set PHY usescase (and mode) before registering DSI host + - drm/msm/dpu: Fall back to a single DSC encoder (1:1:1) on small SoCs + - drm/msm/dpu: Remove arbitrary limit of 1 interface in DSC topology + - drm/msm/gem: Fix error code msm_parse_deps() + - drm/amdkfd: Fix Circular Locking Dependency in + 'svm_range_cpu_invalidate_pagetables' + - PCI: mediatek-gen3: Configure PBUS_CSR registers for EN7581 SoC + - PCI: cadence-ep: Fix the driver to send MSG TLP for INTx without data + payload + - PCI: brcmstb: Set generation limit before PCIe link up + - PCI: brcmstb: Use internal register to change link capability + - PCI: brcmstb: Fix error path after a call to regulator_bulk_get() + - PCI: brcmstb: Fix potential premature regulator disabling + - selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS + - PCI/portdrv: Only disable pciehp interrupts early when needed + - PCI: Avoid reset when disabled via sysfs + - drm/msm/dpu: move needs_cdm setting to dpu_encoder_get_topology() + - drm/msm/dpu: simplify dpu_encoder_get_topology() interface + - drm/msm/dpu: don't set crtc_state->mode_changed from atomic_check() + - drm/panthor: Update CS_STATUS_ defines to correct values + - drm/file: Add fdinfo helper for printing regions with prefix + - drm/panthor: Expose size of driver internal BO's over fdinfo + - drm/panthor: Replace sleep locks with spinlocks in fdinfo path + - drm/panthor: Avoid sleep locking in the internal BO size path + - drm/panthor: Clean up FW version information display + - drm/amd/display: fix type mismatch in CalculateDynamicMetadataParameters() + - drm/msm/a6xx: Fix a6xx indexed-regs in devcoreduump + - powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' + - misc: pci_endpoint_test: Fix pci_endpoint_test_bars_read_bar() error + handling + - misc: pci_endpoint_test: Handle BAR sizes larger than INT_MAX + - PCI: endpoint: pci-epf-test: Handle endianness properly + - crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD + - powerpc/kexec: fix physical address calculation in clear_utlb_entry() + - PCI: Remove stray put_device() in pci_register_host_bridge() + - PCI: xilinx-cpm: Fix IRQ domain leak in error path of probe + - drm/mediatek: Fix config_updating flag never false when no mbox channel + - drm/mediatek: dp: drm_err => dev_err in HPD path to avoid NULL ptr + - drm/mediatek: dsi: fix error codes in mtk_dsi_host_transfer() + - drm/amd/display: avoid NPD when ASIC does not support DMUB + - PCI: dwc: ep: Return -ENOMEM for allocation failures + - PCI: histb: Fix an error handling path in histb_pcie_probe() + - PCI: Fix BAR resizing when VF BARs are assigned + - drm/amdgpu/mes: optimize compute loop handling + - drm/amdgpu/mes: enable compute pipes across all MEC + - PCI: pciehp: Don't enable HPIE when resuming in poll mode + - PCI/bwctrl: Fix pcie_bwctrl_select_speed() return type + - io_uring/net: only import send_zc buffer once + - PCI: Fix NULL dereference in SR-IOV VF creation error path + - io_uring: use lockless_cq flag in io_req_complete_post() + - io_uring: fix retry handling off iowq + - fbdev: au1100fb: Move a variable assignment behind a null pointer check + - dummycon: fix default rows/cols + - mdacon: rework dependency list + - fbdev: sm501fb: Add some geometry checks. + - crypto: iaa - Test the correct request flag + - crypto: qat - set parity error mask for qat_420xx + - crypto: tegra - Use separate buffer for setkey + - crypto: tegra - Do not use fixed size buffers + - crypto: tegra - check return value for hash do_one_req + - crypto: tegra - Transfer HASH init function to crypto engine + - crypto: tegra - Fix HASH intermediate result handling + - crypto: bpf - Add MODULE_DESCRIPTION for skcipher + - crypto: tegra - Use HMAC fallback when keyslots are full + - clk: amlogic: gxbb: drop incorrect flag on 32k clock + - crypto: hisilicon/sec2 - fix for aead authsize alignment + - crypto: hisilicon/sec2 - fix for sec spec check + - RDMA/mlx5: Fix page_size variable overflow + - remoteproc: core: Clear table_sz when rproc_shutdown + - of: property: Increase NR_FWNODE_REFERENCE_ARGS + - pinctrl: renesas: rzg2l: Suppress binding attributes + - remoteproc: qcom_q6v5_pas: Make single-PD handling more robust + - libbpf: Fix hypothetical STT_SECTION extern NULL deref case + - drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock + - selftests/bpf: Fix string read in strncmp benchmark + - x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range() + - clk: renesas: r8a08g045: Check the source of the CPU PLL settings + - remoteproc: qcom: pas: add minidump_id to SC7280 WPSS + - clk: samsung: Fix UBSAN panic in samsung_clk_init() + - pinctrl: nuvoton: npcm8xx: Fix error handling in npcm8xx_gpio_fw() + - crypto: tegra - Fix CMAC intermediate result handling + - clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock + - selftests/bpf: Fix runqslower cross-endian build + - s390: Remove ioremap_wt() and pgprot_writethrough() + - RDMA/mana_ib: Ensure variable err is initialized + - crypto: tegra - Set IV to NULL explicitly for AES ECB + - remoteproc: qcom_q6v5_pas: Use resource with CX PD for MSM8226 + - crypto: tegra - finalize crypto req on error + - crypto: tegra - Reserve keyslots to allocate dynamically + - bpf: Use preempt_count() directly in bpf_send_signal_common() + - lib: 842: Improve error handling in sw842_compress() + - pinctrl: renesas: rza2: Fix missing of_node_put() call + - pinctrl: renesas: rzg2l: Fix missing of_node_put() call + - RDMA/mlx5: Fix MR cache initialization error flow + - selftests/bpf: Fix freplace_link segfault in tailcalls prog test + - clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent + - RDMA/core: Don't expose hw_counters outside of init net namespace + - RDMA/mlx5: Fix calculation of total invalidated pages + - RDMA/erdma: Prevent use-after-free in erdma_accept_newconn() + - remoteproc: qcom_q6v5_mss: Handle platforms with one power domain + - power: supply: bq27xxx_battery: do not update cached flags prematurely + - leds: st1202: Check for error code from devm_mutex_init() call + - crypto: api - Fix larval relookup type and mask + - IB/mad: Check available slots before posting receive WRs + - pinctrl: tegra: Set SFIO mode to Mux Register + - clk: amlogic: g12b: fix cluster A parent data + - clk: amlogic: gxbb: drop non existing 32k clock parent + - selftests/bpf: Select NUMA_NO_NODE to create map + - rust: fix signature of rust_fmt_argument + - crypto: tegra - Fix format specifier in tegra_sha_prep_cmd() + - libbpf: Add namespace for errstr making it libbpf_errstr + - clk: mmp: Fix NULL vs IS_ERR() check + - pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment + - samples/bpf: Fix broken vmlinux path for VMLINUX_BTF + - crypto: qat - remove access to parity register for QAT GEN4 + - clk: clk-imx8mp-audiomix: fix dsp/ocram_a clock parents + - clk: amlogic: g12a: fix mmc A peripheral clock + - pinctrl: bcm2835: don't -EINVAL on alternate funcs from get_direction() + - x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1 + - power: supply: max77693: Fix wrong conversion of charge input threshold + value + - crypto: api - Call crypto_alg_put in crypto_unregister_alg + - clk: stm32f4: fix an uninitialized variable + - crypto: nx - Fix uninitialised hv_nxc on error + - clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable() + - bpf: Fix array bounds error with may_goto + - RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow + - pinctrl: renesas: rzv2m: Fix missing of_node_put() call + - clk: qcom: ipq5424: fix software and hardware flow control error of UART + - mfd: sm501: Switch to BIT() to mitigate integer overflows + - leds: Fix LED_OFF brightness race + - x86/dumpstack: Fix inaccurate unwinding from exception stacks due to + misplaced assignment + - RDMA/core: Fix use-after-free when rename device name + - crypto: hisilicon/sec2 - fix for aead auth key length + - pinctrl: intel: Fix wrong bypass assignment in intel_pinctrl_probe_pwm() + - clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock + - libbpf: Fix accessing BTF.ext core_relo header + - perf stat: Fix find_stat for mixed legacy/non-legacy events + - perf: Always feature test reallocarray + - w1: fix NULL pointer dereference in probe + - staging: gpib: Add missing interface entry point + - staging: gpib: Fix pr_err format warning + - usb: typec: thunderbolt: Fix loops that iterate TYPEC_PLUG_SOP_P and + TYPEC_PLUG_SOP_PP + - usb: typec: thunderbolt: Remove IS_ERR check for plug + - iio: dac: adi-axi-dac: modify stream enable + - perf test: Fix Hwmon PMU test endianess issue + - perf stat: Don't merge counters purely on name + - fs/ntfs3: Factor out ntfs_{create/remove}_procdir() + - fs/ntfs3: Factor out ntfs_{create/remove}_proc_root() + - fs/ntfs3: Fix 'proc_info_root' leak when init ntfs failed + - fs/ntfs3: Update inode->i_mapping->a_ops on compression state + - iio: light: veml6030: extend regmap to support regfields + - iio: gts-helper: export iio_gts_get_total_gain() + - iio: light: veml6030: fix scale to conform to ABI + - iio: adc: ad7124: Micro-optimize channel disabling + - iio: adc: ad7124: Really disable all channels at probe time + - phy: phy-rockchip-samsung-hdptx: Don't use dt aliases to determine phy-id + - perf tools: Add skip check in tool_pmu__event_to_str() + - isofs: fix KMSAN uninit-value bug in do_isofs_readdir() + - perf tests: Fix Tool PMU test segfault + - soundwire: slave: fix an OF node reference leak in soundwire slave device + - staging: gpib: Fix cb7210 pcmcia Oops + - perf report: Switch data file correctly in TUI + - perf report: Fix input reload/switch with symbol sort key + - greybus: gb-beagleplay: Add error handling for gb_greybus_init + - coresight: catu: Fix number of pages while using 64k pages + - vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint + - coresight-etm4x: add isb() before reading the TRCSTATR + - perf pmus: Restructure pmu_read_sysfs to scan fewer PMUs + - perf pmu: Dynamically allocate tool PMU + - perf pmu: Don't double count common sysfs and json events + - tools/x86: Fix linux/unaligned.h include path in lib/insn.c + - perf build: Fix in-tree build due to symbolic link + - ucsi_ccg: Don't show failed to get FW build information error + - iio: accel: mma8452: Ensure error return on failure to matching oversampling + ratio + - iio: accel: msa311: Fix failure to release runtime pm if direct mode claim + fails. + - iio: backend: make sure to NULL terminate stack buffer + - iio: core: Rework claim and release of direct mode to work with sparse. + - iio: adc: ad7173: Grab direct mode for calibration + - iio: adc: ad7192: Grab direct mode for calibration + - perf arm-spe: Fix load-store operation checking + - perf bench: Fix perf bench syscall loop count + - perf machine: Fixup kernel maps ends after adding extra maps + - usb: xhci: correct debug message page size calculation + - fs/ntfs3: Fix a couple integer overflows on 32bit systems + - fs/ntfs3: Prevent integer overflow in hdr_first_de() + - perf test: Add timeout to datasym workload + - perf tests: Fix data symbol test with LTO builds + - NFSD: Fix callback decoder status codes + - soundwire: take in count the bandwidth of a prepared stream + - dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister + - dmaengine: fsl-edma: free irq correctly in remove path + - dmaengine: ae4dma: Use the MSI count and its corresponding IRQ number + - dmaengine: ptdma: Utilize the AE4DMA engine's multi-queue functionality + - iio: adc: ad_sigma_delta: Disable channel after calibration + - iio: adc: ad4130: Fix comparison of channel setups + - iio: adc: ad7124: Fix comparison of channel configs + - iio: adc: ad7173: Fix comparison of channel configs + - iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset + - iio: light: Add check for array bounds in veml6075_read_int_time_ms + - perf debug: Avoid stack overflow in recursive error message + - perf evlist: Add success path to evlist__create_syswide_maps + - perf evsel: tp_format accessing improvements + - perf x86/topdown: Fix topdown leader sampling test error on hybrid + - perf units: Fix insufficient array space + - perf test stat_all_pmu.sh: Correctly check 'perf stat' result + - kernel/events/uprobes: handle device-exclusive entries correctly in + __replace_page() + - kexec: initialize ELF lowest address to ULONG_MAX + - ocfs2: validate l_tree_depth to avoid out-of-bounds access + - reboot: replace __hw_protection_shutdown bool action parameter with an enum + - reboot: reboot, not shutdown, on hw_protection_reboot timeout + - arch/powerpc: drop GENERIC_PTDUMP from mpc885_ads_defconfig + - writeback: let trace_balance_dirty_pages() take struct dtc as parameter + - writeback: fix calculations in trace_balance_dirty_pages() for cgwb + - scripts/gdb/linux/symbols.py: address changes to module_sect_attrs + - NFSv4: Don't trigger uneccessary scans for return-on-close delegations + - NFSv4: Avoid unnecessary scans of filesystems for returning delegations + - NFSv4: Avoid unnecessary scans of filesystems for expired delegations + - NFSv4: Avoid unnecessary scans of filesystems for delayed delegations + - NFS: fix open_owner_id_maxsz and related fields. + - fuse: fix dax truncate/punch_hole fault path + - selftests/mm/cow: fix the incorrect error handling + - um: Pass the correct Rust target and options with gcc + - um: remove copy_from_kernel_nofault_allowed + - um: hostfs: avoid issues on inode number reuse by host + - i3c: master: svc: Fix missing the IBI rules + - perf python: Fixup description of sample.id event member + - perf python: Decrement the refcount of just created event on failure + - perf python: Don't keep a raw_data pointer to consumed ring buffer space + - perf python: Check if there is space to copy all the event + - perf dso: fix dso__is_kallsyms() check + - perf: intel-tpebs: Fix incorrect usage of zfree() + - perf pmu: Handle memory failure in tool_pmu__new() + - staging: rtl8723bs: select CONFIG_CRYPTO_LIB_AES + - staging: vchiq_arm: Register debugfs after cdev + - staging: vchiq_arm: Fix possible NPR of keep-alive thread + - staging: vchiq_arm: Stop kthreads if vchiq cdev register fails + - tty: n_tty: use uint for space returned by tty_write_room() + - perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation + - fs/procfs: fix the comment above proc_pid_wchan() + - perf tools: Fix is_compat_mode build break in ppc64 + - perf tools: annotate asm_pure_loop.S + - perf bpf-filter: Fix a parsing error with comma + - objtool: Handle various symbol types of rodata + - objtool: Handle different entry size of rodata + - objtool: Handle PC relative relocation type + - objtool: Fix detection of consecutive jump tables on Clang 20 + - thermal: core: Remove duplicate struct declaration + - objtool, spi: amd: Fix out-of-bounds stack access in amd_set_spi_freq() + - objtool, nvmet: Fix out-of-bounds stack access in nvmet_ctrl_state_show() + - objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() + - NFS: Shut down the nfs_client only after all the superblocks + - smb: client: Fix netns refcount imbalance causing leaks and use-after-free + - exfat: fix the infinite loop in exfat_find_last_cluster() + - exfat: fix missing shutdown check + - rtnetlink: Allocate vfinfo size for VF GUIDs when supported + - rndis_host: Flag RNDIS modems as WWAN devices + - ksmbd: use aead_request_free to match aead_request_alloc + - ksmbd: fix multichannel connection failure + - ksmbd: fix r_count dec/increment mismatch + - net/mlx5e: SHAMPO, Make reserved size independent of page size + - ring-buffer: Fix bytes_dropped calculation issue + - objtool: Fix segfault in ignore_unreachable_insn() + - LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig + - LoongArch: Fix device node refcount leak in fdt_cpu_clk_init() + - LoongArch: Rework the arch_kgdb_breakpoint() implementation + - ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are + invalid + - net: phy: broadcom: Correct BCM5221 PHY model detection + - octeontx2-af: Fix mbox INTR handler when num VFs > 64 + - octeontx2-af: Free NIX_AF_INT_VEC_GEN irq + - objtool: Fix verbose disassembly if CROSS_COMPILE isn't set + - sched/smt: Always inline sched_smt_active() + - context_tracking: Always inline ct_{nmi,irq}_{enter,exit}() + - rcu-tasks: Always inline rcu_irq_work_resched() + - objtool/loongarch: Add unwind hints in prepare_frametrace() + - nfs: Add missing release on error in nfs_lock_and_join_requests() + - rtc: renesas-rtca3: Disable interrupts only if the RTC is enabled + - spufs: fix a leak on spufs_new_file() failure + - spufs: fix gang directory lifetimes + - spufs: fix a leak in spufs_create_context() + - fs/9p: fix NULL pointer dereference on mkdir + - riscv: ftrace: Add parentheses in macro definitions of make_call_t0 and + make_call_ra + - riscv: Fix the __riscv_copy_vec_words_unaligned implementation + - riscv: Fix missing __free_pages() in check_vector_unaligned_access() + - riscv: fgraph: Select HAVE_FUNCTION_GRAPH_TRACER depends on + HAVE_DYNAMIC_FTRACE_WITH_ARGS + - ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans + - ntb: intel: Fix using link status DB's + - riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of + ftrace_return_to_handler + - riscv: Annotate unaligned access init functions + - riscv: Fix riscv_online_cpu_vec + - riscv: Fix check_unaligned_access_all_cpus + - riscv: Change check_unaligned_access_speed_all_cpus to void + - riscv: Fix set up of cpu hotplug callbacks + - riscv: Fix set up of vector cpu hotplug callback + - firmware: cs_dsp: Ensure cs_dsp_load[_coeff]() returns 0 on success + - ALSA: hda/realtek: Fix built-in mic breakage on ASUS VivoBook X515JA + - RISC-V: errata: Use medany for relocatable builds + - x86/uaccess: Improve performance by aligning writes to 8 bytes in + copy_user_generic(), on non-FSRM/ERMS CPUs + - ublk: make sure ubq->canceling is set when queue is frozen + - s390/entry: Fix setting _CIF_MCCK_GUEST with lowcore relocation + - ASoC: codecs: rt5665: Fix some error handling paths in rt5665_probe() + - spi: cadence: Fix out-of-bounds array access in cdns_mrvl_xspi_setup_clock() + - riscv: Fix hugetlb retrieval of number of ptes in case of !present pte + - riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator + - riscv/purgatory: 4B align purgatory_start + - nvme/ioctl: don't warn on vectorized uring_cmd with fixed buffer + - nvme-pci: skip nvme_write_sq_db on empty rqlist + - ASoC: imx-card: Add NULL check in imx_card_probe() + - spi: bcm2835: Do not call gpiod_put() on invalid descriptor + - ALSA: hda/realtek: Fix built-in mic on another ASUS VivoBook model + - spi: bcm2835: Restore native CS probing when pinctrl-bcm2835 is absent + - xsk: Add launch time hardware offload support to XDP Tx metadata + - igc: Refactor empty frame insertion for launch time support + - igc: Add launch time support to XDP ZC + - igc: Fix TX drops in XDP ZC + - e1000e: change k1 configuration on MTP and later platforms + - ixgbe: fix media type detection for E610 device + - idpf: fix adapter NULL pointer dereference on reboot + - netfilter: nft_set_hash: GC reaps elements with conncount for dynamic sets + only + - netfilter: nf_tables: don't unregister hook when table is dormant + - netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets + - net_sched: skbprio: Remove overly strict queue assertions + - sctp: add mutual exclusion in proc_sctp_do_udp_port() + - net: airoha: Fix qid report in airoha_tc_get_htb_get_leaf_queue() + - net: airoha: Fix ETS priomap validation + - net: mvpp2: Prevent parser TCAM memory corruption + - rtnetlink: Use register_pernet_subsys() in rtnl_net_debug_init(). + - udp: Fix multiple wraparounds of sk->sk_rmem_alloc. + - udp: Fix memory accounting leak. + - vsock: avoid timeout during connect() if the socket is closing + - tunnels: Accept PACKET_HOST in skb_tunnel_check_pmtu(). + - xsk: Fix __xsk_generic_xmit() error code when cq is full + - net: decrease cached dst counters in dst_release + - netfilter: nft_tunnel: fix geneve_opt type confusion addition + - sfc: rip out MDIO support + - sfc: fix NULL dereferences in ef100_process_design_param() + - ipv6: fix omitted netlink attributes when using RTEXT_FILTER_SKIP_STATS + - net: dsa: mv88e6xxx: propperly shutdown PPU re-enable timer on destroy + - net: fix geneve_opt length integer overflow + - ipv6: Start path selection from the first nexthop + - ipv6: Do not consider link down nexthops in path selection + - arcnet: Add NULL check in com20020pci_probe() + - net: ibmveth: make veth_pool_store stop hanging + - netlink: specs: rt_route: pull the ifa- prefix out of the names + - tools/power turbostat: Allow Zero return value for some RAPL registers + - kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally + - drm/xe: Fix unmet direct dependencies warning + - drm/amdgpu/gfx11: fix num_mec + - drm/amdgpu/gfx12: fix num_mec + - perf/core: Fix child_total_time_enabled accounting bug at task exit + - tools/power turbostat: report CoreThr per measurement interval + - tools/power turbostat: Restore GFX sysfs fflush() call + - staging: gpib: ni_usb console messaging cleanup + - staging: gpib: Fix Oops after disconnect in ni_usb + - staging: gpib: agilent usb console messaging cleanup + - staging: gpib: Fix Oops after disconnect in agilent usb + - tty: serial: fsl_lpuart: Use u32 and u8 for register variables + - tty: serial: fsl_lpuart: use port struct directly to simply code + - tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning + - tty: serial: lpuart: only disable CTS instead of overwriting the whole + UARTMODIR register + - usbnet:fix NPE during rx_complete + - rust: Fix enabling Rust and building with GCC for LoongArch + - LoongArch: Increase ARCH_DMA_MINALIGN up to 16 + - LoongArch: Increase MAX_IO_PICS up to 8 + - LoongArch: BPF: Fix off-by-one error in build_prologue() + - LoongArch: BPF: Don't override subprog's return value + - LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC + - x86/hyperv: Fix check of return value from snp_set_vmsa() + - KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected + - x86/microcode/AMD: Fix __apply_microcode_amd()'s return value + - x86/mce: use is_copy_from_user() to determine copy-from-user context + - x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT + - x86/tdx: Fix arch_safe_halt() execution for TDX VMs + - ACPI: x86: Extend Lenovo Yoga Tab 3 quirk with skip GPIO event-handlers + - platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560 + - platform/x86: ISST: Correct command storage data length + - ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk() + - perf/x86/intel: Apply static call for drain_pebs + - perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read + - uprobes/x86: Harden uretprobe syscall trampoline check + - bcachefs: bch2_ioctl_subvolume_destroy() fixes + - x86/Kconfig: Add cmpxchg8b support back to Geode CPUs + - x86/tsc: Always save/restore TSC sched_clock() on suspend/resume + - x86/mm: Fix flush_tlb_range() when used for zapping normal PMDs + - ACPI: platform-profile: Fix CFI violation when accessing sysfs files + - wifi: mt76: mt7925: remove unused acpi function for clc + - acpi: nfit: fix narrowing conversion in acpi_nfit_ctl + - ACPI: resource: Skip IRQ override on ASUS Vivobook 14 X1404VAP + - ACPI: video: Handle fetching EDID as ACPI_TYPE_PACKAGE + - ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE + - [Config] updateconfigs for LD_CAN_USE_KEEP_IN_OVERLAY + - ARM: 9444/1: add KEEP() keyword to ARM_VECTORS + - media: omap3isp: Handle ARM dma_iommu_mapping + - Remove unnecessary firmware version check for gc v9_4_2 + - mmc: omap: Fix memory leak in mmc_omap_new_slot + - mmc: sdhci-pxav3: set NEED_RSP_BUSY capability + - mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD + - KVM: SVM: Don't change target vCPU state on AP Creation VMGEXIT error + - ksmbd: add bounds check for durable handle context + - ksmbd: add bounds check for create lease context + - ksmbd: fix use-after-free in ksmbd_sessions_deregister() + - ksmbd: fix session use-after-free in multichannel connection + - ksmbd: fix overflow in dacloffset bounds check + - ksmbd: validate zero num_subauth before sub_auth is accessed + - ksmbd: fix null pointer dereference in alloc_preauth_hash() + - exfat: fix random stack corruption after get_block + - exfat: fix potential wrong error return from get_block + - tracing: Fix use-after-free in print_graph_function_flags during tracer + switching + - tracing: Ensure module defining synth event cannot be unloaded while tracing + - tracing: Fix synth event printk format for str fields + - tracing/osnoise: Fix possible recursive locking for cpus_read_lock() + - tracing: Verify event formats that have "%*p.." + - mm/gup: reject FOLL_SPLIT_PMD with hugetlb VMAs + - arm64: Don't call NULL in do_compat_alignment_fixup() + - wifi: mt76: mt7921: fix kernel panic due to null pointer dereference + - ext4: don't over-report free space or inodes in statvfs + - ext4: fix OOB read when checking dotdot dir + - PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion + - jfs: fix slab-out-of-bounds read in ea_get() + - jfs: add index corruption check to DT_GETPAGE() + - mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead() + - exec: fix the racy usage of fs_struct->in_exec + - media: vimc: skip .s_stream() for stopped entities + - media: streamzap: fix race between device disconnection and urb callback + - nfsd: don't ignore the return code of svc_proc_register() + - nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid() + - nfsd: put dl_stid if fail to queue dl_recall + - NFSD: Add a Kconfig setting to enable delegated timestamps + - [Config] disable new feature NFSD_V4_DELEG_TIMESTAMPS + - nfsd: fix management of listener transports + - NFSD: nfsd_unlink() clobbers non-zero status returned from + fh_fill_pre_attrs() + - NFSD: Never return NFS4ERR_FILE_OPEN when removing a directory + - NFSD: Skip sending CB_RECALL_ANY when the backchannel isn't up + - perf pmu: Rename name matching for no suffix or wildcard variants + - include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h + - tracing: Do not use PERF enums when perf is not defined + - ASoC: mediatek: mt6359: Fix DT parse error due to wrong child node name + - Linux 6.14.2 + + * Plucky update: v6.14.1 upstream stable release (LP: #2106661) + - ALSA: usb-audio: Add quirk for Plantronics headsets to fix control names + - HID: hid-plantronics: Add mic mute mapping and generalize quirks + - atm: Fix NULL pointer dereference + - cgroup/rstat: Fix forceidle time in cpu.stat + - netfilter: socket: Lookup orig tuple for IPv6 SNAT + - ALSA: hda/realtek: Support mute LED on HP Laptop 15s-du3xxx + - ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA + - counter: stm32-lptimer-cnt: fix error handling when enabling + - counter: microchip-tcb-capture: Fix undefined counter channel state on probe + - tty: serial: 8250: Add some more device IDs + - tty: serial: 8250: Add Brainboxes XC devices + - tty: serial: fsl_lpuart: disable transmitter before changing RS485 related + registers + - net: usb: qmi_wwan: add Telit Cinterion FN990B composition + - net: usb: qmi_wwan: add Telit Cinterion FE990B composition + - net: usb: usbnet: restore usb%d name exception for local mac addresses + - usb: xhci: Don't skip on Stopped - Length Invalid + - usb: xhci: Apply the link chain quirk on NEC isoc endpoints + - memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove + - perf tools: Fix up some comments and code to properly use the event_source + bus + - serial: stm32: do not deassert RS485 RTS GPIO prematurely + - serial: 8250_dma: terminate correct DMA in tx_dma_flush() + - Linux 6.14.1 + + * Null pointer dereference in gVNIC driver (LP: #2106281) + - gve: unlink old napi only if page pool exists + + * Miscellaneous upstream changes + - Revert "net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken" + - Revert "drm: fsl-dcu: enable PIXCLK on LS1021A" + - Revert "m68k: mvme147: Reinstate early console" + - Revert "MAINTAINERS: appoint myself the XFS maintainer for 6.12 LTS" + + -- Mehmet Basaran Thu, 01 May 2025 10:39:35 +0300 + +linux (6.14.0-15.15) plucky; urgency=medium + + * plucky/linux: 6.14.0-15.15 -proposed tracker (LP: #2106239) + + * Enabling GENDWARFKSYMS breaks loading modules (LP: #2103771) + - [Packaging] Bump pahole build-dep + + * BMG: support additional PCI ID (LP: #2105768) + - SAUCE: drm/xe/bmg: Add one additional PCI ID + + * Missing bpftool binary on riscv64 (LP: #2106091) + - [Packaging] Build bpftool and linux-perf on riscv64 + - [Packaging] Allow binary-debs target without enabling + do_flavour_image_package + - [Packaging] Fix bpftool, linux-perf packaging in binary-perarch + + -- Paolo Pisati Sun, 06 Apr 2025 14:36:36 +0200 + +linux (6.14.0-14.14) plucky; urgency=medium + + * plucky/linux: 6.14.0-14.14 -proposed tracker (LP: #2106234) + + * Expose IFLA_VXLAN_FAN_MAP version via sysctl/proc (LP: #2106115) + - SAUCE: fan: expose IFLA_VXLAN_FAN_MAP version via sysctl/proc + + * not able to install a Power9 bare metal with Ubuntu 25.04 Plucky + (LP: #2104297) + - SAUCE: powerpc64/ftrace: fix module loading without patchable function + entries + + * bluetooth/detect-output failed due to the lack of USB device id in btusb.c + (LP: #2094969) + - SAUCE: Bluetooth: btusb: Add new VID/PID 0489/e14e for MT7925 + + * Don't suggests fdutils package anymore (LP: #2104355) + - [Packaging] Drop fdutils from linux-image Suggests + + * Miscellaneous Ubuntu changes + - [Packaging] Add bpftool, linux-perf to linux-image Suggests + + -- Paolo Pisati Fri, 04 Apr 2025 15:12:05 +0200 + +linux (6.14.0-13.13) plucky; urgency=medium + + * plucky/linux: 6.14.0-13.13 -proposed tracker (LP: #2104293) + + * Miscellaneous Ubuntu changes + - [Packaging] Fix invoking of control-create + + -- Paolo Pisati Wed, 26 Mar 2025 20:26:51 +0100 + +linux (6.14.0-12.12) plucky; urgency=medium + + * plucky/linux: 6.14.0-12.12 -proposed tracker (LP: #2104021) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.03.24) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.03.24) + + * Disconnected paths for mqueues show a TODO in the kernel logs (LP: #2102237) + - SAUCE: apparmor4.0.0 [58/53]: apparmor: add mediation of disconnected paths + in mqueues + + * Installation of AppArmor on a 6.14 kernel produces error message "Illegal + number: yes" (LP: #2102680) + - SAUCE: apparmor4.0.0 [56/53]: apparmor: create an + AA_SFS_TYPE_BOOLEAN_INTPRINT sysctl variant + - SAUCE: apparmor4.0.0 [57/53]: apparmor: Use AA_SFS_FILE_BOOLEAN_INTPRINT for + userns and io_uring sysctls + + * QRT AppArmorUnixDomainConnect test failures on Plucky 6.14 kernel + (LP: #2103460) + - SAUCE: apparmor4.0.0 [54/53]: AppArmor: Fix af_unix backwards compat + - SAUCE: apparmor4.0.0 [55/53]: apparmor: Fix inet mediation + + * Mouse cursor flashes using the 'xe' DRM driver (LP: #2103981) + - drm/xe/display: Re-use display vmas when possible + + * Snapdragon X Elite: Sync concept kernel changes (LP: #2100858) + - SAUCE: drm/msm/dp: Fix support of LTTPR handling + - SAUCE: drm/msm/dp: Introduce link training per-segment for LTTPRs + - SAUCE: wifi: ath12k: fix ring-buffer corruption + - SAUCE: wifi: ath11k: fix ring-buffer corruption + - SAUCE: arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1 + - SAUCE: Revert "usb: typec: ps883x: fix missing accessibility check" + + * drm/xe: improve behavior under memory pressure (LP: #2102659) + - drm/xe: Reject BO eviction if BO is bound to current VM + + * Introduce configfs-based interface for gpio-aggregator (LP: #2103496) + - gpio: introduce utilities for synchronous fake device creation + - gpio: sim: convert to use dev-sync-probe utilities + - gpio: virtuser: convert to use dev-sync-probe utilities + - [Config] updateconfigs for DEV_SYNC_PROBE + - SAUCE: gpio: aggregator: reorder functions to prepare for configfs + introduction + - SAUCE: gpio: aggregator: add aggr_alloc()/aggr_free() + - SAUCE: gpio: aggregator: introduce basic configfs interface + - SAUCE: gpio: aggregator: rename 'name' to 'key' in aggr_parse() + - SAUCE: gpio: aggregator: expose aggregator created via legacy sysfs to + configfs + - SAUCE: gpio: aggregator: cancel deferred probe for devices created via + configfs + - SAUCE: Documentation: gpio: document configfs interface for gpio-aggregator + - SAUCE: selftests: gpio: add test cases for gpio-aggregator + + * python perf module missing in plucky's kernel (LP: #2103653) + - [Packaging] linux-perf: Fix python perf library location + + * Miscellaneous Ubuntu changes + - [packaging] mv debian.master/copyright debian + - [Config] Disable CONFIG_MODULE_COMPRESS_ALL + - Revert "SAUCE: Support but do not require compressed modules" + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Config] Revert back to GENKSYMS on amd64/arm64 too, drop + rust support" + + -- Paolo Pisati Wed, 26 Mar 2025 10:50:08 +0100 + +linux (6.14.0-11.11) plucky; urgency=medium + + * plucky/linux: 6.14.0-11.11 -proposed tracker (LP: #2103404) + + * Snapdragon X Elite: Sync concept kernel changes (LP: #2100858) + - firmware: qcom: uefisecapp: fix efivars registration race + - soc: qcom: pdr: Fix the potential deadlock + - clk: qcom: gcc-x1e80100: Unregister GCC_GPU_CFG_AHB_CLK/GCC_DISP_XO_CLK + - arm64: dts: qcom: x1e80100: Set CPU interconnect paths as ACTIVE_ONLY + - dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings + - usb: typec: Add support for Parade PS8830 Type-C Retimer + - usb: typec: ps883x: fix probe error handling + - usb: typec: ps883x: fix registration race + - usb: typec: ps883x: fix missing accessibility check + - usb: typec: ps883x: fix configuration error handling + - drm/dp: Add helper to set LTTPRs in transparent mode + - drm/msm/dp: Add support for LTTPR handling + - arm64: dts: qcom: x1e80100: Add the watchdog device + - arm64: dts: qcom: x1e80100: Mark usb_2 as dma-coherent + - arm64: dts: qcom: x1e80100: Wire up PCIe PHY NOCSR resets + - arm64: dts: qcom: Commonize X1 CRD DTSI + - arm64: dts: qcom: Add X1P42100 SoC and CRD + - arm64: dts: qcom: x1e80100: Fix video thermal zone + - arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown + - arm64: dts: qcom: x1e80100: Add GPU cooling + - arm64: dts: qcom: x1e80100: Drop unused passive thermal trip points for CPU + - arm64: dts: qcom: x1e80100-dell-xps13-9345: Enable external DP support + - arm64: dts: qcom: x1e001de-devkit: Enable HBR3 on external DPs + - arm64: dts: qcom: x1e80100-hp-x14: Enable HBR3 on external DPs + - arm64: dts: qcom: x1e80100-qcp: Enable HBR3 on external DPs + - drm/edp-panel: Add panel used by T14s Gen6 Snapdragon + - arm64: dts: qcom: x1e80100-slim7x: Drop incorrect qcom,ath12k-calibration- + variant + - SAUCE: arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b + always-on + - SAUCE: arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies + - SAUCE: arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes + - SAUCE: arm64: dts: qcom: x1e80100: Enable cpufreq + - SAUCE: arm64: dts: qcom: x1e80100-t14s: Describe the Parade PS8830 retimers + - SAUCE: arm64: dts: qcom: x1e80100-t14s: Enable external DisplayPort support + - SAUCE: arm64: dts: qcom: x1e80100-t14s: Enable HBR3 on external DPs + - SAUCE: arm64: dts: qcom: x1e78100-t14s: enable bluetooth + - SAUCE: Add Bluetooth support for the Lenovo Yoga Slim 7x + - SAUCE: dt-bindings: platform: Add bindings for Lenovo Yoga Slim 7x EC + - SAUCE: platform: arm64: Add driver for Lenovo Yoga Slim 7x's EC + - SAUCE: arm64: dts: qcom: Add EC to Lenovo Yoga Slim 7x + - SAUCE: arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth + - SAUCE: arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports + - SAUCE: arm64: dts: qcom: x1e80100-vivobook-s15: Enable micro-sd card reader + - SAUCE: arm64: dts: qcom: x1p64100-acer-swift-sf14-11 dt for Acer Swift 14 + SF14-11 (touchpad fix) + - SAUCE: dt-bindings: arm: qcom: Add Acer Swift 14 AI + - SAUCE: arm64: dts: qcom: x1e80100-acer-swift-sf14-11: Enable HBR3 on + external DPs + - SAUCE: firmware: qcom: scm: Allow QSEECOM on Acer Swift 14 models + - SAUCE: arm64: dts: qcom: x1e001de-devkit: Set ps8830 reset-gpios active low + - SAUCE: Change: cracking sound fix + - SAUCE: rtc: pm8xxx: add support for uefi offset + - SAUCE: rtc: pm8xxx: mitigate flash wear + - SAUCE: arm64: dts: qcom: sc8280xp-x13s: switch to uefi rtc offset + - SAUCE: dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag + - SAUCE: rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm + - SAUCE: arm64: dts: qcom: x1e80100: enable rtc + - SAUCE: arm64: dts: qcom: x1e80100-microsoft-romulus: Enable external DP + support + - SAUCE: arm64: dts: qcom: x1e80100-asus-vivobook: Introduce retimers, + external DP + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps-9345: Add WiFi/BT pwrseq + - SAUCE: arm64: dts: qcom: x1e78100-t14s: Add display brightness control + support + - SAUCE: hack: efi/libstub: mitigate t14s exit_boot_services() failure + - [Config] Enable X Elite modules on arm64 + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.14-rc7 rebase + + -- Paolo Pisati Mon, 17 Mar 2025 11:29:48 +0100 + +linux (6.14.0-10.10) plucky; urgency=medium + + * plucky/linux: 6.14.0-10.10 -proposed tracker (LP: #2102106) + + * Miscellaneous Ubuntu changes + - [Config] Revert back to GENKSYMS on amd64/arm64 too, drop rust support + + -- Paolo Pisati Wed, 12 Mar 2025 15:20:52 +0100 + +linux (6.14.0-9.9) plucky; urgency=medium + + * plucky/linux: 6.14.0-9.9 -proposed tracker (LP: #2101943) + + * Miscellaneous Ubuntu changes + - [Config] Revert back to GENKSYMS on non-rust-enabled archs + + -- Paolo Pisati Tue, 11 Mar 2025 12:38:22 +0100 + +linux (6.14.0-8.8) plucky; urgency=medium + + * plucky/linux: 6.14.0-8.8 -proposed tracker (LP: #2101833) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.02.26) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.03.10) + + * wdat_wdt.ko should be pulled in by linux-image-virtual (LP: #2098554) + - [Packaging]: wdat_wdt.ko is moved from "linux-modules-extra-*-generic" to + "linux-modules-*-generic" + + * Add additional PCI ids for BMG support (LP: #2098969) + - drm/xe/bmg: Add new PCI IDs + + * Provide linux-perf package (LP: #1613393) + - [Packaging] Split linux-perf from linux-tools-common + + * linux-tools-common: bpftool wrapper causes build failure for xdp-tools + (LP: #2007308) + - [Packaging] bpftool: move to separate unversioned and unflavored binary + package + + * Miscellaneous Ubuntu changes + - [Packaging] templates/image.postrm.in: Add modules.weakdep to the remove- + list + - [Config] Re-enable rust support, switch from genksyms to gendwarfksyms + - [packaging] check-in copyright directly in debian/ + - [Packaging] remove intermediate $(DEBIAN)/control.stub + - [Config] updateconfigs following v6.14-rc6 rebase + + -- Paolo Pisati Mon, 10 Mar 2025 16:46:27 +0100 + +linux (6.14.0-7.7) plucky; urgency=medium + + * plucky/linux: 6.14.0-7.7 -proposed tracker (LP: #2100581) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Sync riscv64.mk with linux-riscv tree" + + -- Paolo Pisati Fri, 28 Feb 2025 10:46:05 +0100 + +linux (6.14.0-6.6) plucky; urgency=medium + + * plucky/linux: 6.14.0-6.6 -proposed tracker (LP: #2100481) + + * Miscellaneous Ubuntu changes + - [Packaging] riscv64.mk: fix a typo + - [Packaging] enable signing for s390x + - [Packaging] riscv64.mk: disable building as part of linux-generic + + -- Paolo Pisati Fri, 28 Feb 2025 09:44:27 +0100 + +linux (6.14.0-5.5) plucky; urgency=medium + + * plucky/linux: 6.14.0-5.5 -proposed tracker (LP: #2100254) + + * Miscellaneous Ubuntu changes + - [Packaging] Sync riscv64.mk with linux-riscv tree + - [Packaging] clean up the distclean rule + - [Config] updateconfigs following v6.14-rc4 rebase + + -- Paolo Pisati Wed, 26 Feb 2025 11:23:13 +0100 + +linux (6.14.0-4.4) plucky; urgency=medium + + * plucky/linux: 6.14.0-4.4 -proposed tracker (LP: #2098875) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.02.11) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [1/53]: Stacking: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [2/53]: Stacking: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [3/53]: Stacking: LSM: security_lsmblob_to_secctx + module selection + - SAUCE: apparmor4.0.0 [4/53]: Stacking: Audit: Add record for multiple task + security contexts + - SAUCE: apparmor4.0.0 [5/53]: Stacking: Audit: multiple subject lsm values + for netlabel + - SAUCE: apparmor4.0.0 [6/53]: Stacking: Audit: Add record for multiple object + contexts + - SAUCE: apparmor4.0.0 [7/53]: Stacking: LSM: Single calls in secid hooks + - SAUCE: apparmor4.0.0 [8/53]: Stacking: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [9/53]: Stacking: Audit: Call only the first of the + audit rule hooks + - SAUCE: apparmor4.0.0 [10/53]: Stacking: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [11/53]: 6.15 apparmor-next: apparmor: Use str_yes_no() + helper function + - SAUCE: apparmor4.0.0 [12/53]: 6.15 apparmor-next: apparmor: Improve debug + print infrastructure + - SAUCE: apparmor4.0.0 [13/53]: 6.15 apparmor-next: apparmor: cleanup: + attachment perm lookup to use lookup_perms() + - SAUCE: apparmor4.0.0 [14/53]: 6.15 apparmor-next: apparmor: remove redundant + unconfined check. + - SAUCE: apparmor4.0.0 [15/53]: 6.15 apparmor-next: apparmor: switch signal + mediation to use RULE_MEDIATES + - SAUCE: apparmor4.0.0 [16/53]: 6.15 apparmor-next: apparmor: ensure labels + with more than one entry have correct flags + - SAUCE: apparmor4.0.0 [17/53]: 6.15 apparmor-next: apparmor: remove explicit + restriction that unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [18/53]: 6.15 apparmor-next: apparmor: cleanup: + refactor file_perm() to doc semantics of some checks + - SAUCE: apparmor4.0.0 [19/53]: 6.15 apparmor-next: apparmor: carry mediation + check on label + - SAUCE: apparmor4.0.0 [20/53]: 6.15 apparmor-next: apparmor: add additional + flags to extended permission. + - SAUCE: apparmor4.0.0 [21/53]: 6.15 apparmor-next: apparmor: add support for + profiles to define the kill signal + - SAUCE: apparmor4.0.0 [22/53]: 6.15 apparmor-next: apparmor: fix + x_table_lookup when stacking is not the first entry + - SAUCE: apparmor4.0.0 [23/53]: 6.15 apparmor-next: apparmor: add ability to + mediate caps with policy state machine + - SAUCE: apparmor4.0.0 [24/53]: 6.15 apparmor-next: apparmor: remove af_select + macro + - SAUCE: apparmor4.0.0 [25/53]: 6.15 apparmor-next: apparmor: lift kernel + socket check out of critical section + - SAUCE: apparmor4.0.0 [26/53]: 6.15 apparmor-next: apparmor: in preparation + for finer networking rules rework match_prot + - SAUCE: apparmor4.0.0 [27/53]: 6.15 apparmor-next: apparmor: add fine grained + af_unix mediation + - SAUCE: apparmor4.0.0 [28/53]: 6.15 apparmor-next: apparmor: gate make fine + grained unix mediation behind v9 abi + - SAUCE: apparmor4.0.0 [29/53]: 6.15 apparmor-next: apparmor: fix dbus + permission queries to v9 ABI + - SAUCE: apparmor4.0.0 [30/53]: 6.15 apparmor-next: apparmor: Fix checking + address of an array in accum_label_info() + - SAUCE: apparmor4.0.0 [31/53]: 6.15 apparmor-next: apparmor: Modify + mismatched function name + - SAUCE: apparmor4.0.0 [32/53]: 6.15 apparmor-next: apparmor: Modify + mismatched function name + - SAUCE: apparmor4.0.0 [33/53]: 6.15 apparmor-next: apparmor: fix typos and + spelling errors + - SAUCE: apparmor4.0.0 [34/53]: 6.15 apparmor-next: apparmor: use the + condition in AA_BUG_FMT even with debug disabled + - SAUCE: apparmor4.0.0 [35/53]: 6.15 apparmor-next: apparmor: Remove unused + variable 'sock' in __file_sock_perm() + - SAUCE: apparmor4.0.0 [36/53]: Revert "6.15 apparmor-next: apparmor: fix dbus + permission queries to v9 ABI" + - SAUCE: apparmor4.0.0 [37/53]: Revert "6.15 apparmor-next: apparmor: gate + make fine grained unix mediation behind v9 abi" + - SAUCE: apparmor4.0.0 [38/53]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [39/53]: apparmor: make debug_values_table static + - SAUCE: apparmor4.0.0 [40/53]: apparmor: Document that label must be last + member in struct aa_profile + - SAUCE: apparmor4.0.0 [41/53]: apparmor: transition from a list of rules to a + vector of rules + - SAUCE: apparmor4.0.0 [42/53]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [43/53]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [44/53]: add unprivileged user ns mediation + - SAUCE: apparmor4.0.0 [45/53]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/53]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [48/53]: apparmor: allow profile to be transitioned + when a userns is created + - SAUCE: apparmor4.0.0 [49/53]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [51/53]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [52/53]: add io_uring mediation + - SAUCE: apparmor4.0.0 [53/53]: enable userspace upcall for mediation + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [46/53]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - [Packaging] disable signing for ppc64el + - [Packaging] disable signing for s390x + - [packaging] rename to linux + - [Config] update RUSTC version + - [packaging] remove $(wildcard $(DEBIAN)/control.d/*) dependency + - [packaging] avoid piping control-create for error detection + - [packaging] split flavour-control.stub + - [packaging] generate debian/control with correct signed/unsigned + - [packaging] remove DESC and =HUMAN= substitution + - [Packaging] remove unnecessary dependency on control.stub + - [Packaging] add .gitignore and clean more files + - SAUCE: apparmor4.0.0 [50/53]: apparmor: audit mqueue-via-path access as + getattr instead of unlink + - [Packaging] debian.master/dkms-versions -- remove ipu6-drivers, + ipu7-drivers, backport-iwlwifi-dkms and mofed-modules-24.10 FTBFS + + -- Paolo Pisati Thu, 20 Feb 2025 14:20:53 +0100 + +linux-unstable (6.14.0-3.3) plucky; urgency=medium + + * plucky/linux-unstable: 6.14.0-3.3 -proposed tracker (LP: #2098836) + + * RISC-V kernel config is out of sync with other archs (LP: #1981437) + - [Config] riscv64: Sync config with other architectures + + * Miscellaneous Ubuntu changes + - SAUCE: platform/x86: int3472: fixup s/polarity/gpio_flags/ + - [Config] riscv64: Disable CONFIG_ARCH_RENESAS + - [Config] riscv64: Disable Andes vendor extensions + - [Config] riscv64: Set CONFIG_MMC_SPI=m like other architectures + - [Config] riscv64: Enable Svpbmt support + - [Config] riscv64: Disable kernel compression + - [packaging] enable ppc64el signing + - [Config] updateconfigs + + -- Paolo Pisati Wed, 19 Feb 2025 16:38:27 +0100 + +linux-unstable (6.14.0-2.2) plucky; urgency=medium + + * plucky/linux-unstable: 6.14.0-2.2 -proposed tracker (LP: #2097828) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.14-rc2 rebase + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Build all packages for linux-unstable" + + -- Paolo Pisati Tue, 11 Feb 2025 10:11:13 +0100 + +linux-unstable (6.14.0-1.1) plucky; urgency=medium + + * [25.04 FEAT] In-kernel crypto support MSA 11 HMAC (LP: #2096812) + - [Config] Change CONFIG_CRYPTO_HMAC_S390 to m for s390x + + * Miscellaneous Ubuntu changes + - Update dropped.txt (MODVERSION patches for Rust) + - [Config] updateconfigs following v6.14-rc1 rebase + - SAUCE: binder: turn into module - list_lru_add()/list_lru_del() + - SAUCE: binder: turn into module - lock_vma_under_rcu() + - [Config] temporarily disable DRM_HISI_HIBMC, FTBFS + - dkms: remove zfs, FTBFS + - [Config] armhf: disable TEGRA210_ADMA, FTBFS + + -- Paolo Pisati Fri, 07 Feb 2025 09:41:02 +0100 + +linux-unstable (6.13.0-2.2) plucky; urgency=medium + + * plucky/linux-unstable: 6.13.0-2.2 -proposed tracker (LP: #2096822) + + * Failed to probe for OVTI02C1: chip id mismatch: 560243!=0 (LP: #2090932) + - SAUCE: ACPI: scan: Update HID for new platform + + * Miscellaneous Ubuntu changes + - [Packaging]: Fix linux-bpf-dev build error for non-main kernels + - [Packaging] perf: enable debuginfod support + - [Config] toolchain version update + + -- Timo Aaltonen Tue, 28 Jan 2025 11:15:49 +0200 + +linux-unstable (6.13.0-1.1) plucky; urgency=medium + + * plucky/linux-unstable: 6.13.0-1.1 -proposed tracker (LP: #2096776) + + * Miscellaneous Ubuntu changes + - [Packaging] Rename to linux-unstable, bump version + - [Config] updateconfigs following v6.13 rebase + - [Config] toolchain version update + + -- Timo Aaltonen Mon, 27 Jan 2025 17:54:43 +0200 + +linux-unstable (6.13.0-0.0) plucky; urgency=medium + + * Dummy entry. + + -- Timo Aaltonen Mon, 20 Jan 2025 13:35:31 +0200 + +linux (6.12.0-10.10) plucky; urgency=medium + + * plucky/linux: 6.12.0-10.10 -proposed tracker (LP: #2092288) + + * Miscellaneous Ubuntu changes + - [Config] toolchain version update + - [Packaging] Update to clang-19 and newer rustc + - [Config] Re-enable rust support + + -- Paolo Pisati Sun, 29 Dec 2024 11:25:01 +0100 + +linux (6.12.0-9.9) plucky; urgency=medium + + * plucky/linux: 6.12.0-9.9 -proposed tracker (LP: #2092219) + + * Miscellaneous Ubuntu changes + - [Packaging] rules: Fix raw_kernelversion + + -- Paolo Pisati Fri, 20 Dec 2024 10:17:18 +0100 + +linux (6.12.0-8.8) plucky; urgency=medium + + * plucky/linux: 6.12.0-8.8 -proposed tracker (LP: #2092077) + + * Intel AX211 wireless module [8086:7740] subsys [8086:4090] wrongly + recognized as BE201 (LP: #2091546) + - SAUCE: wifi: iwlwifi: fix CRF name for Bz + + * When /dev/vmbus/hv_kvp is not present, disable hv-kvp-daemon (LP: #2091744) + - [Packaging] disable hv-kvp-daemon if needed + + * Miscellaneous Ubuntu changes + - [Packaging] linux-bpf-dev: Restructure packaging + - [Packaging] linux-bpf-dev: Skip packaging for additional kernel flavors + - [Packaging] rules: Convert install-arch-headers to a stamped target + - [Packaging] rules: Fold config check into stamp-prepare-% target + - [Packaging] rules: Fold module signature check into stamp-install-% target + - [Packaging] rules: Remove inclusion of 4-checks.mk + - [Packaging] rules: Remove build tests + - [Packaging] rules: Clean up install-perarch target + - [Packaging] rules: Move the ABI build directory to debian/build + - [Packaging] rules: Introduce global abi_dir variable + - [Packaging] rules: Introduce global build_dir variable + - [Packaging] rules: Remove target_flavour variable + - [Packaging] rules: Remove unused confdir variables + - [Packaging] rules: Remove undefined variables prev_{abinum, revisions} + - [Packaging] rules: Remove explicit kernel compression + - [Packaging] rules: Remove ship_extras_package feature + - [Packaging] rules: Remove stamps/stamp-prepare-indep target + - [Packaging] rules: Explicitly set do_*tools* variables to false + - [Packaging] rules: Wrap do_linux_tools around bpftool install/usage + + -- Paolo Pisati Thu, 19 Dec 2024 15:10:50 +0100 + +linux (6.12.0-7.7) plucky; urgency=medium + + * plucky/linux: 6.12.0-7.7 -proposed tracker (LP: #2091852) + + * Miscellaneous Ubuntu changes + - remove the AA stack + + * Remove the entire AA stack (FTBFS) + + -- Paolo Pisati Wed, 18 Dec 2024 14:55:25 +0100 + +linux (6.12.0-6.6) plucky; urgency=medium + + * plucky/linux: 6.12.0-6.6 -proposed tracker (LP: #2091721) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [29/84]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [30/84]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [31/84]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [32/84]: af_unix mediation + - SAUCE: apparmor4.0.0 [33/84]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [35/84]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [36/84]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [37/84]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [38/84]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [39/84]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [40/84]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [41/84]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [42/84]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [43/84]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [44/84]: prompt - fix caching + - SAUCE: apparmor4.0.0 [45/84]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [46/84]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [47/84]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [48/84]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [49/84]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [50/84]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/93] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [55/84]: add io_uring mediation + - SAUCE: apparmor4.0.0 [56/84]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [57/84]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [58/84]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [59/84]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [60/84]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [61/84]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [62/84]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [63/84]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [64/84]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [65/84]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [66/84]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [67/84]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [68/84]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [69/84]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [70/84]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [71/84]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [72/84]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [73/84]: fixup notify + - SAUCE: apparmor4.0.0 [74/84]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [75/84]: apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [76/84]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0 [77/84]: fix reserved mem for when we save ipv6 + addresses + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * linux-gcp 6.8.0-1005.5 (+ others) Noble kernel regression with new apparmor + profiles/features (LP: #2061851) + - SAUCE: apparmor4.0.0 [78/84]: fix address mapping for recvfrom + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [52/84]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [53/84]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [54/84]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - [packaging] rename to linux + - SAUCE: apparmor4.0.0 [1/84]: LSM: Add the lsm_prop data structure. + - SAUCE: apparmor4.0.0 [2/84]: LSM: Use lsm_prop in security_audit_rule_match + - SAUCE: apparmor4.0.0 [3/84]: LSM: Add lsmprop_to_secctx hook + - SAUCE: apparmor4.0.0 [4/84]: Audit: maintain an lsm_prop in audit_context + - SAUCE: apparmor4.0.0 [5/84]: LSM: Use lsm_prop in security_ipc_getsecid + - SAUCE: apparmor4.0.0 [6/84]: Audit: Update shutdown LSM data + - SAUCE: apparmor4.0.0 [7/84]: LSM: Use lsm_prop in security_current_getsecid + - SAUCE: apparmor4.0.0 [8/84]: LSM: Use lsm_prop in security_inode_getsecid + - SAUCE: apparmor4.0.0 [9/84]: Audit: use an lsm_prop in audit_names + - SAUCE: apparmor4.0.0 [10/84]: LSM: Create new security_cred_getlsmprop LSM + hook + - SAUCE: apparmor4.0.0 [11/84]: Audit: Change context data from secid to + lsm_prop + - SAUCE: apparmor4.0.0 [12/84]: Use lsm_prop for audit data + - SAUCE: apparmor4.0.0 [13/84]: LSM: Remove lsm_prop scaffolding + - SAUCE: apparmor4.0.0 [14/84]: LSM: Ensure the correct LSM context releaser + - SAUCE: apparmor4.0.0 [15/84]: LSM: Replace context+len with lsm_context + - SAUCE: apparmor4.0.0 [16/84]: LSM: Use lsm_context in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [17/84]: LSM: lsm_context in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [18/84]: LSM: secctx provider check on release + - SAUCE: apparmor4.0.0 [19/84]: LSM: Use lsm_context in + security_inode_notifysecctx + - SAUCE: apparmor4.0.0 [20/84]: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [21/84]: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [22/84]: LSM: security_lsmblob_to_secctx module + selection + - SAUCE: apparmor4.0.0 [23/84]: Audit: Add record for multiple task security + contexts + - SAUCE: apparmor4.0.0 [24/84]: Audit: multiple subject lsm values for + netlabel + - SAUCE: apparmor4.0.0 [25/84]: Audit: Add record for multiple object contexts + - SAUCE: apparmor4.0.0 [26/84]: LSM: Single calls in secid hooks + - SAUCE: apparmor4.0.0 [27/84]: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [28/84]: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [34/84]: fixup inode_set_attr + - SAUCE: apparmor4.0.0 [79/84]: apparmor: add support for 2^24 states to the + dfa state machine. + - SAUCE: apparmor4.0.0 [80/84]: apparmor: advertise to userspace support of + user upcall for file rules. + - SAUCE: apparmor4.0.0 [81/84]: apparmor: allocate xmatch for nullpdf inside + aa_alloc_null + - SAUCE: apparmor4.0.0 [82/84]: apparmor: properly handle cx/px lookup failure + for complain + - SAUCE: apparmor4.0.0 [83/84]: apparmor: fix prompt failing during large down + loads + - SAUCE: apparmor4.0.0 [84/84]: apparmor: fix allow field in notification + + -- Paolo Pisati Fri, 13 Dec 2024 16:35:21 +0100 + +linux (6.12.0-5.5) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-5.5 -proposed tracker (LP: #2091628) + + * Plucky update: v6.12.4 upstream stable release (LP: #2091627) + - xfs: remove unknown compat feature check in superblock write validation + - quota: flush quota_release_work upon quota writeback + - btrfs: drop unused parameter file_offset from + btrfs_encoded_read_regular_fill_pages() + - btrfs: change btrfs_encoded_read() so that reading of extent is done by + caller + - btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages() + - btrfs: fix use-after-free in btrfs_encoded_read_endio() + - btrfs: don't loop for nowait writes when checking for cross references + - btrfs: add a sanity check for btrfs root in btrfs_search_slot() + - btrfs: ref-verify: fix use-after-free after invalid ref action + - iommu/tegra241-cmdqv: Fix unused variable warning + - netkit: Add option for scrubbing skb meta data + - md/raid5: Wait sync io to finish before changing group cnt + - md/md-bitmap: Add missing destroy_work_on_stack() + - arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer + - arm64: dts: mediatek: mt8186-corsola: Fix GPU supply coupling max-spread + - arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay + - arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay + - arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity + - media: qcom: camss: fix error path on configuration of power domains + - media: amphion: Set video drvdata before register video device + - media: imx-jpeg: Set video drvdata before register video device + - media: mtk-jpeg: Fix null-ptr-deref during unload module + - media: i2c: dw9768: Fix pm_runtime_set_suspended() with runtime pm enabled + - arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay + - media: i2c: tc358743: Fix crash in the probe error path when using polling + - media: imx-jpeg: Ensure power suppliers be suspended before detach them + - media: platform: rga: fix 32-bit DMA limitation + - media: verisilicon: av1: Fix reference video buffer pointer assignment + - media: ts2020: fix null-ptr-deref in ts2020_probe() + - media: platform: exynos4-is: Fix an OF node reference leak in + fimc_md_is_isp_available + - efi/libstub: Free correct pointer on failure + - net: phy: dp83869: fix status reporting for 1000base-x autonegotiation + - media: amphion: Fix pm_runtime_set_suspended() with runtime pm enabled + - media: venus: Fix pm_runtime_set_suspended() with runtime pm enabled + - media: gspca: ov534-ov772x: Fix off-by-one error in set_frame_rate() + - media: ov08x40: Fix burst write sequence + - media: platform: allegro-dvt: Fix possible memory leak in + allocate_buffers_internal() + - media: uvcvideo: Stop stream during unregister + - media: uvcvideo: Require entities to have a non-zero unique ID + - tracing: Fix function timing profiler to initialize hashtable + - kunit: Fix potential null dereference in kunit_device_driver_test() + - kunit: string-stream: Fix a UAF bug in kunit_init_suite() + - ovl: Filter invalid inodes with missing lookup function + - maple_tree: refine mas_store_root() on storing NULL + - ftrace: Fix regression with module command in stack_trace_filter + - vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event + - zram: clear IDLE flag after recompression + - iommu/io-pgtable-arm: Fix stage-2 map/unmap for concatenated tables + - iommu/arm-smmu: Defer probe of clients after smmu device bound + - leds: lp55xx: Remove redundant test for invalid channel number + - mm/damon/vaddr: fix issue in damon_va_evenly_split_region() + - powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang + - cpufreq: scmi: Fix cleanup path when boost enablement fails + - clk: qcom: gcc-qcs404: fix initial rate of GPLL3 + - ad7780: fix division by zero in ad7780_write_raw() + - nvmem: core: Check read_only flag for force_ro in bin_attr_nvmem_write() + - driver core: fw_devlink: Stop trying to optimize cycle detection logic + - spmi: pmic-arb: fix return path in for_each_available_child_of_node() + - ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow + - s390/entry: Mark IRQ entries to fix stack depot warnings + - ARM: 9430/1: entry: Do a dummy read from VMAP shadow + - ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire() + - net: stmmac: set initial EEE policy configuration + - vfio/qat: fix overflow check in qat_vf_resume_write() + - PCI: qcom: Disable ASPM L0s for X1E80100 + - perf jevents: fix breakage when do perf stat on system metric + - remoteproc: qcom_q6v5_pas: disable auto boot for wpss + - PCI: imx6: Fix suspend/resume support on i.MX6QDL + - mm/slub: Avoid list corruption when removing a slab from the full list + - f2fs: fix to drop all discards after creating snapshot on lvm device + - ceph: extract entity name from device id + - ceph: pass cred pointer to ceph_mds_auth_match() + - ceph: fix cred leak in ceph_mds_check_access() + - mtd: spinand: winbond: Fix 512GW and 02JW OOB layout + - mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information + - util_macros.h: fix/rework find_closest() macros + - s390/stacktrace: Use break instead of return statement + - scsi: ufs: exynos: Add check inside exynos_ufs_config_smu() + - scsi: ufs: exynos: Fix hibern8 notify callbacks + - i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled + - i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() + - i3c: master: svc: fix possible assignment of the same address to two devices + - i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter + - PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible + - PCI: keystone: Add link up check to ks_pcie_other_map_bus() + - PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy() + - PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf() + - slab: Fix too strict alignment check in create_cache() + - fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful + iov_iter_zero + - thermal: int3400: Fix reading of current_uuid for active policy + - leds: flash: mt6360: Fix device_for_each_child_node() refcounting in error + paths + - ovl: properly handle large files in ovl_security_fileattr + - mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address + into one operation + - dm: Fix typo in error message + - dm thin: Add missing destroy_work_on_stack() + - PCI: dwc: ep: Fix advertised resizable BAR size regression + - PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes + - PCI: rockchip-ep: Fix address translation unit programming + - nfsd: make sure exp active before svc_export_show + - nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur + - iio: accel: kx022a: Fix raw read format + - iio: invensense: fix multiple odr switch when FIFO is off + - iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() + - iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer + - iio: gts: fix infinite loop for gain_to_scaletables() + - powerpc: Fix stack protector Kconfig test for clang + - powerpc: Adjust adding stack protector flags to KBUILD_CLAGS for clang + - binder: fix node UAF in binder_add_freeze_work() + - binder: fix OOB in binder_add_freeze_work() + - binder: fix freeze UAF in binder_release_work() + - binder: fix BINDER_WORK_FROZEN_BINDER debug logs + - binder: fix BINDER_WORK_CLEAR_FREEZE_NOTIFICATION debug logs + - binder: allow freeze notification for dead nodes + - binder: fix memleak of proc->delivered_freeze + - binder: add delivered_freeze to debugfs output + - dt-bindings: net: fec: add pps channel property + - net: fec: refactor PPS channel configuration + - net: fec: make PPS channel configurable + - drm/panic: Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n + - drm/sti: avoid potential dereference of error pointers in + sti_hqvdp_atomic_check + - drm/sti: avoid potential dereference of error pointers in + sti_gdp_atomic_check + - drm: panel: jd9365da-h3: Remove unused num_init_cmds structure member + - drm/sti: avoid potential dereference of error pointers + - drm/fbdev-dma: Select FB_DEFERRED_IO + - drm/mediatek: Fix child node refcount handling in early exit + - drm/bridge: it6505: Fix inverted reset polarity + - drm/etnaviv: flush shader L1 cache after user commandstream + - drm: xlnx: zynqmp_dpsub: fix hotplug detection + - drm/xe/xe_guc_ads: save/restore OA registers and allowlist regs + - drm/xe/migrate: fix pat index usage + - Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable" + - drm/xe/migrate: use XE_BO_FLAG_PAGETABLE + - drm/xe/guc_submit: fix race around suspend_pending + - drm/amdkfd: Use the correct wptr size + - drm/amdgpu/pm: add gen5 display to the user on smu v14.0.2/3 + - drm/amd: Add some missing straps from NBIO 7.11.0 + - drm/amdgpu: fix usage slab after free + - drm/amd/pm: skip setting the power source on smu v14.0.2/3 + - drm/amd: Fix initialization mistake for NBIO 7.11 devices + - drm/amd/pm: update current_socclk and current_uclk in gpu_metrics on smu + v13.0.7 + - drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3 + - drm/amd/pm: Remove arcturus min power limit + - drm/amd/display: Fix handling of plane refcount + - drm/amd/display: update pipe selection policy to check head pipe + - drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dto + - posix-timers: Target group sigqueue to current task only if not exiting + - Revert "drm/xe/xe_guc_ads: save/restore OA registers and allowlist regs" + - Linux 6.12.4 + + * Plucky update: v6.12.3 upstream stable release (LP: #2091626) + - sched: Initialize idle tasks only once + - Linux 6.12.3 + + * Plucky update: v6.12.2 upstream stable release (LP: #2091625) + - MAINTAINERS: appoint myself the XFS maintainer for 6.12 LTS + - drm/amd/display: Skip Invalid Streams from DSC Policy + - drm/amd/display: Fix incorrect DSC recompute trigger + - s390/facilities: Fix warning about shadow of global variable + - s390/virtio_ccw: Fix dma_parm pointer not set up + - efs: fix the efs new mount api implementation + - arm64: probes: Disable kprobes/uprobes on MOPS instructions + - kselftest/arm64: hwcap: fix f8dp2 cpuinfo name + - kselftest/arm64: mte: fix printf type warnings about __u64 + - kselftest/arm64: mte: fix printf type warnings about longs + - block/fs: Pass an iocb to generic_atomic_write_valid() + - fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid() + - s390/cio: Do not unregister the subchannel based on DNV + - s390/pageattr: Implement missing kernel_page_present() + - x86/pvh: Call C code via the kernel virtual mapping + - brd: defer automatic disk creation until module initialization succeeds + - ext4: avoid remount errors with 'abort' mount option + - mips: asm: fix warning when disabling MIPS_FP_SUPPORT + - s390/cpum_sf: Fix and protect memory allocation of SDBs with mutex + - initramfs: avoid filename buffer overrun + - arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers + - kselftest/arm64: Fix encoding for SVE B16B16 test + - nvme-pci: fix freeing of the HMB descriptor table + - m68k: mvme147: Fix SCSI controller IRQ numbers + - m68k: mvme147: Reinstate early console + - arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG + - acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block() + - loop: fix type of block size + - cachefiles: Fix incorrect length return value in + cachefiles_ondemand_fd_write_iter() + - cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter() + - cachefiles: Fix NULL pointer dereference in object->file + - netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING + - block: take chunk_sectors into account in bio_split_write_zeroes + - block: fix bio_split_rw_at to take zone_write_granularity into account + - s390/syscalls: Avoid creation of arch/arch/ directory + - hfsplus: don't query the device logical block size multiple times + - ext4: fix race in buffer_head read fault injection + - nvme-pci: reverse request order in nvme_queue_rqs + - virtio_blk: reverse request order in virtio_queue_rqs + - crypto: mxs-dcp - Fix AES-CBC with hardware-bound keys + - crypto: caam - Fix the pointer passed to caam_qi_shutdown() + - crypto: qat - remove check after debugfs_create_dir() + - crypto: qat/qat_420xx - fix off by one in uof_get_name() + - crypto: qat/qat_4xxx - fix off by one in uof_get_name() + - firmware: google: Unregister driver_info on failure + - EDAC/bluefield: Fix potential integer overflow + - crypto: qat - remove faulty arbiter config reset + - thermal: core: Initialize thermal zones before registering them + - thermal: core: Rearrange PM notification code + - thermal: core: Represent suspend-related thermal zone flags as bits + - thermal: core: Mark thermal zones as initializing to start with + - thermal: core: Fix race between zone registration and system suspend + - EDAC/fsl_ddr: Fix bad bit shift operations + - EDAC/skx_common: Differentiate memory error sources + - EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator + - crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return + -EBUSY + - crypto: cavium - Fix the if condition to exit loop after timeout + - cpufreq/amd-pstate: Don't update CPPC request in + amd_pstate_cpu_boost_update() + - amd-pstate: Set min_perf to nominal_perf for active mode performance gov + - crypto: hisilicon/qm - disable same error report before resetting + - EDAC/igen6: Avoid segmentation fault on module unload + - crypto: qat - Fix missing destroy_workqueue in adf_init_aer() + - crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init() + - sched/cpufreq: Ensure sd is rebuilt for EAS check + - doc: rcu: update printed dynticks counter bits + - rcu/srcutiny: don't return before reenabling preemption + - rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu + - rcu/nocb: Fix missed RCU barrier on deoffloading + - hwmon: (pmbus/core) clear faults after setting smbalert mask + - hwmon: (nct6775-core) Fix overflows seen when writing limit attributes + - ACPI: CPPC: Fix _CPC register setting issue + - thermal: testing: Use DEFINE_FREE() and __free() to simplify code + - thermal: testing: Initialize some variables annoteded with _free() + - crypto: caam - add error check to caam_rsa_set_priv_key_form + - crypto: bcm - add error check in the ahash_hmac_init function + - crypto: cavium - Fix an error handling path in cpt_ucode_load_fw() + - rcuscale: Do a proper cleanup if kfree_scale_init() fails + - tools/lib/thermal: Make more generic the command encoding function + - thermal/lib: Fix memory leak on error in thermal_genl_auto() + - x86/unwind/orc: Fix unwind for newly forked tasks + - Revert "scripts/faddr2line: Check only two symbols when calculating symbol + size" + - cleanup: Remove address space of returned pointer + - time: Partially revert cleanup on msecs_to_jiffies() documentation + - time: Fix references to _msecs_to_jiffies() handling of values + - timers: Add missing READ_ONCE() in __run_timer_base() + - locking/atomic/x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() + - locking/atomic/x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() + - kcsan, seqlock: Support seqcount_latch_t + - kcsan, seqlock: Fix incorrect assumption in read_seqbegin() + - sched/ext: Remove sched_fork() hack + - locking/rt: Add sparse annotation PREEMPT_RT's sleeping locks. + - rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT + - clocksource/drivers:sp804: Make user selectable + - clocksource/drivers/timer-ti-dm: Fix child node refcount handling + - irqchip/riscv-aplic: Prevent crash when MSI domain is missing + - regulator: qcom-smd: make smd_vreg_rpm static + - spi: spi-fsl-lpspi: Use IRQF_NO_AUTOEN flag in request_irq() + - arm64: dts: qcom: qcs6390-rb3gen2: use modem.mbn for modem DSP + - ARM: dts: renesas: genmai: Fix partition size for QSPI NOR Flash + - drivers: soc: xilinx: add the missing kfree in xlnx_add_cb_for_suspend() + - microblaze: Export xmb_manager functions + - arm64: dts: mediatek: mt8188: Fix wrong clock provider in MFG1 power domain + - arm64: dts: mediatek: mt8395-genio-1200-evk: Fix dtbs_check error for phy + - arm64: dts: mt8195: Fix dtbs_check error for mutex node + - arm64: dts: mt8195: Fix dtbs_check error for infracfg_ao node + - arm64: dts: mediatek: mt8183-kukui: Disable DPI display interface + - arm64: dts: mt8183: Add port node to dpi node + - soc: ti: smartreflex: Use IRQF_NO_AUTOEN flag in request_irq() + - soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get() + - arm64: dts: qcom: sm6350: Fix GPU frequencies missing on some speedbins + - arm64: dts: qcom: sda660-ifc6560: fix l10a voltage ranges + - ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode + - mmc: mmc_spi: drop buggy snprintf() + - scripts/kernel-doc: Do not track section counter across processed files + - arm64: dts: qcom: x1e80100-slim7x: Drop orientation-switch from USB SS[0-1] + QMP PHYs + - arm64: dts: qcom: x1e80100-vivobook-s15: Drop orientation-switch from USB + SS[0-1] QMP PHYs + - openrisc: Implement fixmap to fix earlycon + - efi/libstub: fix efi_parse_options() ignoring the default command line + - tpm: fix signed/unsigned bug when checking event logs + - media: i2c: max96717: clean up on error in max96717_subdev_init() + - media: i2c: vgxy61: Fix an error handling path in vgxy61_detect() + - media: i2c: ds90ub960: Fix missing return check on ub960_rxport_read call + - arm64: dts: mt8183: krane: Fix the address of eeprom at i2c4 + - arm64: dts: mt8183: kukui: Fix the address of eeprom at i2c4 + - arm64: dts: qcom: x1e80100: Resize GIC Redistributor register region + - kernel-doc: allow object-like macros in ReST output + - arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs + - gpio: sloppy-logic-analyzer remove reference to rcu_momentary_dyntick_idle() + - arm64: dts: mediatek: mt8173-elm-hana: Add vdd-supply to second source + trackpad + - arm64: dts: mediatek: mt8188: Fix USB3 PHY port default status + - arm64: dts: mediatek: mt8195-cherry: Use correct audio codec DAI + - Revert "cgroup: Fix memory leak caused by missing cgroup_bpf_offline" + - cgroup/bpf: only cgroup v2 can be attached by bpf programs + - regulator: rk808: Restrict DVS GPIOs to the RK808 variant only + - power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF + - arm64: tegra: p2180: Add mandatory compatible for WiFi node + - arm64: dts: rockchip: Remove 'enable-active-low' from two boards + - arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-ns + - arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-ns + - arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-ns + - arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-ns + - pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle + - ARM: dts: cubieboard4: Fix DCDC5 regulator constraints + - arm64: dts: ti: k3-j7200: Fix register map for main domain pmx + - arm64: dts: ti: k3-j7200: Fix clock ids for MCSPI instances + - arm64: dts: ti: k3-j721e: Fix clock IDs for MCSPI instances + - arm64: dts: ti: k3-j721s2: Fix clock IDs for MCSPI instances + - watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 + - arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers + - dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries + - of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify + - pmdomain: ti-sci: Add missing of_node_put() for args.np + - spi: tegra210-quad: Avoid shift-out-of-bounds + - spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time​ + - regmap: irq: Set lockdep class for hierarchical IRQ domains + - arm64: dts: renesas: hihope: Drop #sound-dai-cells + - arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and + output-high in GPIO + - arm64: dts: mediatek: mt6358: fix dtbs_check error + - arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply names + - arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed + regulators + - selftests/resctrl: Print accurate buffer size as part of MBM results + - selftests/resctrl: Fix memory overflow due to unhandled wraparound + - selftests/resctrl: Protect against array overrun during iMC config parsing + - firmware: arm_scpi: Check the DVFS OPP count returned by the firmware + - media: ipu6: Fix DMA and physical address debugging messages for 32-bit + - media: ipu6: not override the dma_ops of device in driver + - media: ipu6: remove architecture DMA ops dependency in Kconfig + - pwm: Assume a disabled PWM to emit a constant inactive output + - media: atomisp: Add check for rgby_data memory allocation failure + - arm64: dts: rockchip: correct analog audio name on Indiedroid Nova + - sched_ext: scx_bpf_dispatch_from_dsq_set_*() are allowed from unlocked + context + - HID: hyperv: streamline driver probe to avoid devres issues + - platform/x86: asus-wmi: Fix inconsistent use of thermal policies + - platform/x86/intel/pmt: allow user offset for PMT callbacks + - platform/x86: panasonic-laptop: Return errno correctly in show callback + - drm/imagination: Convert to use time_before macro + - drm/imagination: Use pvr_vm_context_get() + - drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused + - drm/vc4: hvs: Don't write gamma luts on 2711 + - drm/vc4: hdmi: Avoid hang with debug registers when suspended + - drm/vc4: hvs: Fix dlist debug not resetting the next entry pointer + - drm/vc4: hvs: Remove incorrect limit from hvs_dlist debugfs function + - drm/vc4: hvs: Correct logic on stopping an HVS channel + - wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service() + - drm/omap: Fix possible NULL dereference + - drm/omap: Fix locking in omap_gem_new_dmabuf() + - drm/v3d: Appease lockdep while updating GPU stats + - wifi: p54: Use IRQF_NO_AUTOEN flag in request_irq() + - wifi: mwifiex: Use IRQF_NO_AUTOEN flag in request_irq() + - udmabuf: change folios array from kmalloc to kvmalloc + - udmabuf: fix vmap_udmabuf error page set + - drm/imx/dcss: Use IRQF_NO_AUTOEN flag in request_irq() + - drm/imx/ipuv3: Use IRQF_NO_AUTOEN flag in request_irq() + - drm/panel: nt35510: Make new commands optional + - drm/v3d: Address race-condition in MMU flush + - drm/v3d: Flush the MMU before we supply more memory to the binner + - drm/amdgpu: Fix JPEG v4.0.3 register write + - wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss1 + - wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss2 + - wifi: ath12k: Skip Rx TID cleanup for self peer + - dt-bindings: vendor-prefixes: Add NeoFidelity, Inc + - ASoC: fsl_micfil: fix regmap_write_bits usage + - ASoC: dt-bindings: mt6359: Update generic node name and dmic-mode + - drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module + - ASoC: fsl-asoc-card: Add missing handling of {hp,mic}-dt-gpios + - drm/bridge: anx7625: Drop EDID cache on bridge power off + - drm/bridge: it6505: Drop EDID cache on bridge power off + - libbpf: Fix expected_attach_type set handling in program load callback + - libbpf: Fix output .symtab byte-order during linking + - selftests/bpf: Fix uprobe_multi compilation error + - dlm: fix swapped args sb_flags vs sb_status + - wifi: rtl8xxxu: Perform update_beacon_work when beaconing is enabled + - ASoC: amd: acp: fix for inconsistent indenting + - ASoC: amd: acp: fix for cpu dai index logic + - drm/amd/display: fix a memleak issue when driver is removed + - wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup() + - wifi: ath12k: fix one more memcpy size error + - libbpf: Add missing per-arch include path + - selftests: bpf: Add missing per-arch include path + - bpf: Fix the xdp_adjust_tail sample prog issue + - selftests/bpf: Fix backtrace printing for selftests crashes + - wifi: ath11k: Fix CE offset address calculation for WCN6750 in SSR + - selftests/bpf: add missing header include for htons + - wifi: cfg80211: check radio iface combination for multi radio per wiphy + - ice: consistently use q_idx in ice_vc_cfg_qs_msg() + - drm/vc4: hdmi: Increase audio MAI fifo dreq threshold + - drm/vc4: Introduce generation number enum + - drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_lut_load + - drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_atomic_flush + - drm/vc4: Correct generation check in vc4_hvs_lut_load + - libbpf: fix sym_is_subprog() logic for weak global subprogs + - accel/ivpu: Prevent recovery invocation during probe and resume + - ASoC: rt722-sdca: Remove logically deadcode in rt722-sdca.c + - libbpf: never interpret subprogs in .text as entry programs + - netdevsim: copy addresses for both in and out paths + - drm/bridge: tc358767: Fix link properties discovery + - drm/panic: Select ZLIB_DEFLATE for DRM_PANIC_SCREEN_QR_CODE + - selftests/bpf: Fix msg_verify_data in test_sockmap + - selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap + - wifi: mwifiex: add missing locking for cfg80211 calls + - wifi: wilc1000: Set MAC after operation mode + - wifi: mwifiex: Fix memcpy() field-spanning write warning in + mwifiex_config_scan() + - drm: fsl-dcu: enable PIXCLK on LS1021A + - drm: panel: nv3052c: correct spi_device_id for RG35XX panel + - drm/msm/dpu: on SDM845 move DSPP_3 to LM_5 block + - drm/msm/dpu: drop LM_3 / LM_4 on SDM845 + - drm/msm/dpu: drop LM_3 / LM_4 on MSM8998 + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in cn10k.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dmac_flt.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c + - selftests/bpf: fix test_spin_lock_fail.c's global vars usage + - libbpf: move global data mmap()'ing into bpf_object__load() + - wifi: rtw89: rename rtw89_vif to rtw89_vif_link ahead for MLO + - wifi: rtw89: rename rtw89_sta to rtw89_sta_link ahead for MLO + - wifi: rtw89: read bss_conf corresponding to the link + - wifi: rtw89: read link_sta corresponding to the link + - wifi: rtw89: refactor VIF related func ahead for MLO + - wifi: rtw89: refactor STA related func ahead for MLO + - wifi: rtw89: tweak driver architecture for impending MLO support + - wifi: rtw89: Fix TX fail with A2DP after scanning + - wifi: rtw89: unlock on error path in rtw89_ops_unassign_vif_chanctx() + - drm/panfrost: Remove unused id_mask from struct panfrost_model + - bpf, arm64: Remove garbage frame for struct_ops trampoline + - drm/msm/adreno: Use IRQF_NO_AUTOEN flag in request_irq() + - drm/msm/gpu: Check the status of registration to PM QoS + - drm/xe/hdcp: Fix gsc structure check in fw check status + - drm/etnaviv: Request pages from DMA32 zone on addressing_limited + - drm/etnaviv: hold GPU lock across perfmon sampling + - drm/amd/display: Increase idle worker HPD detection time + - drm/amd/display: Reduce HPD Detection Interval for IPS + - drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new() + - drm: zynqmp_kms: Unplug DRM device before removal + - drm: xlnx: zynqmp_disp: layer may be null while releasing + - wifi: wfx: Fix error handling in wfx_core_init() + - wifi: cw1200: Fix potential NULL dereference + - drm/msm/dpu: cast crtc_clk calculation to u64 in _dpu_core_perf_calc_clk() + - bpf, bpftool: Fix incorrect disasm pc + - bpf: Tighten tail call checks for lingering locks, RCU, preempt_disable + - drm/vkms: Drop unnecessary call to drm_crtc_cleanup() + - drm/amdgpu: Fix the memory allocation issue in + amdgpu_discovery_get_nps_info() + - drm/amdkfd: Use dynamic allocation for CU occupancy array in + 'kfd_get_cu_occupancy()' + - bpf: Mark raw_tp arguments with PTR_MAYBE_NULL + - drm: use ATOMIC64_INIT() for atomic64_t + - netfilter: nf_tables: avoid false-positive lockdep splat on rule deletion + - netfilter: nf_tables: must hold rcu read lock while iterating expression + type list + - netfilter: nf_tables: must hold rcu read lock while iterating object type + list + - netlink: typographical error in nlmsg_type constants definition + - wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg() + - drm/panfrost: Add missing OPP table refcnt decremental + - drm/panthor: introduce job cycle and timestamp accounting + - drm/panthor: record current and maximum device clock frequencies + - drm/panthor: Fix OPP refcnt leaks in devfreq initialisation + - isofs: avoid memory leak in iocharset + - selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap + - selftests/bpf: Fix SENDPAGE data logic in test_sockmap + - selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap + - selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap + - bpf, sockmap: Several fixes to bpf_msg_push_data + - bpf, sockmap: Several fixes to bpf_msg_pop_data + - bpf, sockmap: Fix sk_msg_reset_curr + - ipv6: release nexthop on device removal + - selftests: net: really check for bg process completion + - wifi: cfg80211: Remove the Medium Synchronization Delay validity check + - wifi: iwlwifi: allow fast resume on ax200 + - wifi: iwlwifi: mvm: tell iwlmei when we finished suspending + - drm/amdgpu: fix ACA bank count boundary check error + - drm/amdgpu: Fix map/unmap queue logic + - drm/amdkfd: Fix wrong usage of INIT_WORK() + - bpf: Allow return values 0 and 1 for kprobe session + - bpf: Force uprobe bpf program to always return 0 + - selftests/bpf: skip the timer_lockup test for single-CPU nodes + - ipv6: Fix soft lockups in fib6_select_path under high next hop churn + - net: rfkill: gpio: Add check for clk_enable() + - Revert "wifi: iwlegacy: do not skip frames with bad FCS" + - bpf: Use function pointers count as struct_ops links count + - bpf: Add kernel symbol for struct_ops trampoline + - ALSA: usx2y: Use snd_card_free_when_closed() at disconnection + - ALSA: us122l: Use snd_card_free_when_closed() at disconnection + - ALSA: caiaq: Use snd_card_free_when_closed() at disconnection + - ALSA: 6fire: Release resources at card release + - i2c: dev: Fix memory leak when underlying adapter does not support I2C + - selftests: netfilter: Fix missing return values in conntrack_dump_flush + - Bluetooth: btintel_pcie: Add handshake between driver and firmware + - Bluetooth: btintel: Do no pass vendor events to stack + - Bluetooth: btmtk: adjust the position to init iso data anchor + - Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name() + - Bluetooth: ISO: Use kref to track lifetime of iso_conn + - Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending + - Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending + - Bluetooth: ISO: Send BIG Create Sync via hci_sync + - Bluetooth: fix use-after-free in device_for_each_child() + - xsk: Free skb when TX metadata options are invalid + - erofs: fix file-backed mounts over FUSE + - erofs: fix blksize < PAGE_SIZE for file-backed mounts + - erofs: handle NONHEAD !delta[1] lclusters gracefully + - dlm: fix dlm_recover_members refcount on error + - eth: fbnic: don't disable the PCI device twice + - net: txgbe: remove GPIO interrupt controller + - net: txgbe: fix null pointer to pcs + - netpoll: Use rcu_access_pointer() in netpoll_poll_lock + - wireguard: selftests: load nf_conntrack if not present + - bpf: fix recursive lock when verdict program return SK_PASS + - unicode: Fix utf8_load() error path + - cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged + - RDMA/core: Provide rdma_user_mmap_disassociate() to disassociate mmap pages + - RDMA/hns: Disassociate mmap pages for all uctx when HW is being reset + - pinctrl: renesas: rzg2l: Fix missing return in rzg2l_pinctrl_register() + - clk: mediatek: drop two dead config options + - trace/trace_event_perf: remove duplicate samples on the first tracepoint + event + - pinctrl: zynqmp: drop excess struct member description + - pinctrl: renesas: Select PINCTRL_RZG2L for RZ/V2H(P) SoC + - clk: qcom: videocc-sm8550: depend on either gcc-sm8550 or gcc-sm8650 + - iommu/s390: Implement blocking domain + - scsi: hisi_sas: Enable all PHYs that are not disabled by user during + controller reset + - powerpc/vdso: Flag VDSO64 entry points as functions + - mfd: tps65010: Use IRQF_NO_AUTOEN flag in request_irq() to fix race + - mfd: da9052-spi: Change read-mask to write-mask + - mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device + - mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device + - mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices + - mfd: intel_soc_pmic_bxtwc: Fix IRQ domain names duplication + - cpufreq: loongson2: Unregister platform_driver on failure + - powerpc/fadump: Refactor and prepare fadump_cma_init for late init + - powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init() + - mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE + - mtd: rawnand: atmel: Fix possible memory leak + - clk: Allow kunit tests to run without OF_OVERLAY enabled + - powerpc/mm/fault: Fix kfence page fault reporting + - iommu/tegra241-cmdqv: Staticize cmdqv_debugfs_dir + - clk: sophgo: avoid integer overflow in sg2042_pll_recalc_rate() + - mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in + RD_ANY_REG_OP + - powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore + - cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() + - cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() + - iommu/amd/pgtbl_v2: Take protection domain lock before invalidating TLB + - RDMA/hns: Fix an AEQE overflow error caused by untimely update of eq_db_ci + - RDMA/hns: Fix flush cqe error when racing with destroy qp + - RDMA/hns: Modify debugfs name + - RDMA/hns: Use dev_* printings in hem code instead of ibdev_* + - RDMA/hns: Fix cpu stuck caused by printings during reset + - RDMA/rxe: Fix the qp flush warnings in req + - RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey + - clk: sunxi-ng: d1: Fix PLL_AUDIO0 preset + - clk: renesas: rzg2l: Fix FOUTPOSTDIV clk + - RDMA/rxe: Set queue pair cur_qp_state when being queried + - RDMA/mlx5: Call dev_put() after the blocking notifier + - RDMA/core: Implement RoCE GID port rescan and export delete function + - RDMA/mlx5: Ensure active slave attachment to the bond IB device + - RISC-V: KVM: Fix APLIC in_clrip and clripnum write emulation + - riscv: kvm: Fix out-of-bounds array access + - clk: imx: lpcg-scu: SW workaround for errata (e10858) + - clk: imx: fracn-gppll: correct PLL initialization flow + - clk: imx: fracn-gppll: fix pll power up + - clk: imx: clk-scu: fix clk enable state save and restore + - clk: imx: imx8-acm: Fix return value check in + clk_imx_acm_attach_pm_domains() + - iommu/vt-d: Fix checks and print in dmar_fault_dump_ptes() + - iommu/vt-d: Fix checks and print in pgtable_walk() + - checkpatch: always parse orig_commit in fixes tag + - mfd: rt5033: Fix missing regmap_del_irq_chip() + - leds: max5970: Fix unreleased fwnode_handle in probe function + - leds: ktd2692: Set missing timing properties + - fs/proc/kcore.c: fix coccinelle reported ERROR instances + - scsi: target: Fix incorrect function name in pscsi_create_type_disk() + - scsi: bfa: Fix use-after-free in bfad_im_module_exit() + - scsi: fusion: Remove unused variable 'rc' + - scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() + - scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() + - scsi: sg: Enable runtime power management + - x86/tdx: Introduce wrappers to read and write TD metadata + - x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup() + - x86/tdx: Dynamically disable SEPT violations from causing #VEs + - powerpc/fadump: allocate memory for additional parameters early + - fadump: reserve param area if below boot_mem_top + - RDMA/hns: Fix out-of-order issue of requester when setting FENCE + - RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() + - cpufreq: loongson3: Check for error code from devm_mutex_init() call + - cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost() + - cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power() + - kasan: move checks to do_strncpy_from_user + - kunit: skb: use "gfp" variable instead of hardcoding GFP_KERNEL + - ocfs2: fix uninitialized value in ocfs2_file_read_iter() + - zram: ZRAM_DEF_COMP should depend on ZRAM + - iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift + - dax: delete a stale directory pmem + - KVM: PPC: Book3S HV: Stop using vc->dpdes for nested KVM guests + - KVM: PPC: Book3S HV: Avoid returning to nested hypervisor on pending + doorbells + - powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static + - RDMA/hns: Fix different dgids mapping to the same dip_idx + - KVM: PPC: Book3S HV: Fix kmv -> kvm typo + - powerpc/kexec: Fix return of uninitialized variable + - fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem() + - RDMA/mlx5: Move events notifier registration to be after device registration + - clk: clk-apple-nco: Add NULL check in applnco_probe + - clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883 + - clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs + - clk: en7523: remove REG_PCIE*_{MEM,MEM_MASK} configuration + - clk: en7523: move clock_register in hw_init callback + - clk: en7523: introduce chip_scu regmap + - clk: en7523: fix estimation of fixed rate for EN7581 + - dt-bindings: clock: axi-clkgen: include AXI clk + - clk: clk-axi-clkgen: make sure to enable the AXI bus clock + - zram: permit only one post-processing operation at a time + - zram: fix NULL pointer in comp_algorithm_show() + - RDMA/bnxt_re: Correct the sequence of device suspend + - arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw + - pinctrl: k210: Undef K210_PC_DEFAULT + - rtla/timerlat: Do not set params->user_workload with -U + - smb: cached directories can be more than root file handle + - mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks() + - mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb() + - x86: fix off-by-one in access_ok() + - perf cs-etm: Don't flush when packet_queue fills up + - gfs2: Rename GLF_VERIFY_EVICT to GLF_VERIFY_DELETE + - gfs2: Allow immediate GLF_VERIFY_DELETE work + - gfs2: Fix unlinked inode cleanup + - perf mem: Fix printing PERF_MEM_LVLNUM_{L2_MHB|MSC} + - dt-bindings: PCI: mediatek-gen3: Allow exact number of clocks only + - PCI: Fix reset_method_store() memory leak + - perf jevents: Don't stop at the first matched pmu when searching a events + table + - perf stat: Close cork_fd when create_perf_stat_counter() failed + - perf stat: Fix affinity memory leaks on error path + - perf trace: Keep exited threads for summary + - perf test attr: Add back missing topdown events + - rust: rbtree: fix `SAFETY` comments that should be `# Safety` sections + - f2fs: compress: fix inconsistent update of i_blocks in + release_compress_blocks and reserve_compress_blocks + - f2fs: fix null-ptr-deref in f2fs_submit_page_bio() + - mailbox, remoteproc: k3-m4+: fix compile testing + - f2fs: fix to account dirty data in __get_secs_required() + - perf dso: Fix symtab_type for kmod compression + - perf disasm: Fix capstone memory leak + - perf probe: Fix libdw memory leak + - perf probe: Correct demangled symbols in C++ program + - rust: kernel: fix THIS_MODULE header path in ThisModule doc comment + - rust: macros: fix documentation of the paste! macro + - PCI: cpqphp: Fix PCIBIOS_* return value confusion + - rust: block: fix formatting of `kernel::block::mq::request` module + - perf disasm: Use disasm_line__free() to properly free disasm_line + - perf disasm: Fix not cleaning up disasm_line in symbol__disassemble_raw() + - virtiofs: use pages instead of pointer for kernel direct IO + - perf ftrace latency: Fix unit on histogram first entry when using --use-nsec + - i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin + - f2fs: fix the wrong f2fs_bug_on condition in f2fs_do_replace_block + - f2fs: check curseg->inited before write_sum_page in change_curseg + - f2fs: Fix not used variable 'index' + - f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason() + - f2fs: fix to avoid use GC_AT when setting gc_mode as GC_URGENT_LOW or + GC_URGENT_MID + - PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is + supported + - PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert() + - PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert() + - PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds + - perf build: Add missing cflags when building with custom libtraceevent + - f2fs: fix race in concurrent f2fs_stop_gc_thread + - f2fs: fix to map blocks correctly for direct write + - f2fs: fix to avoid forcing direct write to use buffered IO on inline_data + inode + - perf trace: avoid garbage when not printing a trace event's arguments + - m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x + - m68k: coldfire/device.c: only build FEC when HW macros are defined + - svcrdma: Address an integer overflow + - nfsd: drop inode parameter from nfsd4_change_attribute() + - perf list: Fix topic and pmu_name argument order + - perf trace: Fix tracing itself, creating feedback loops + - perf trace: Do not lose last events in a race + - perf trace: Avoid garbage when not printing a syscall's arguments + - remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe() + - remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe() + - remoteproc: qcom: pas: add minidump_id to SM8350 resources + - rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length + - remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region + - PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' + - NFSD: Prevent NULL dereference in nfsd4_process_cb_update() + - NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir() + - nfsd: release svc_expkey/svc_export with rcu_work + - svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init() + - NFSD: Fix nfsd4_shutdown_copy() + - nfs_common: must not hold RCU while calling nfsd_file_put_local + - f2fs: fix to do cast in F2FS_{BLK_TO_BYTES, BTYES_TO_BLK} to avoid overflow + - perf bpf-filter: Return -ENOMEM directly when pfi allocation fails + - hwmon: (tps23861) Fix reporting of negative temperatures + - hwmon: (aquacomputer_d5next) Fix length of speed_input array + - phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in + airoha_pcie_phy_init_clk_out() + - phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in + airoha_pcie_phy_init_csr_2l() + - phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in + airoha_pcie_phy_init_ssc_jcpll() + - phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions + - vdpa/mlx5: Fix suboptimal range on iotlb iteration + - vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() + - vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data() + - selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels + - gpio: zevio: Add missed label initialisation + - vfio/pci: Properly hide first-in-list PCIe extended capability + - fs_parser: update mount_api doc to match function signature + - LoongArch: Fix build failure with GCC 15 (-std=gnu23) + - LoongArch: BPF: Sign-extend return values + - power: supply: core: Remove might_sleep() from power_supply_put() + - power: supply: bq27xxx: Fix registers of bq27426 + - power: supply: rt9471: Fix wrong WDT function regfield declaration + - power: supply: rt9471: Use IC status regfield to report real charger status + - fs/ntfs3: Equivalent transition from page to folio + - power: reset: ep93xx: add AUXILIARY_BUS dependency + - net: usb: lan78xx: Fix double free issue with interrupt buffer allocation + - net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device + - tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets + - net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL + configuration + - net: microchip: vcap: Add typegroup table terminators in kunit tests + - netlink: fix false positive warning in extack during dumps + - exfat: fix file being changed by unaligned direct write + - net/l2tp: fix warning in l2tp_exit_net found by syzbot + - s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() + - rtase: Refactor the rtase_check_mac_version_valid() function + - rtase: Correct the speed for RTL907XD-V1 + - rtase: Corrects error handling of the rtase_check_mac_version_valid() + - net/ipv6: delete temporary address if mngtmpaddr is removed or unmanaged + - net: mdio-ipq4019: add missing error check + - marvell: pxa168_eth: fix call balance of pep->clk handling routines + - net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken + - octeontx2-af: RPM: Fix mismatch in lmac type + - octeontx2-af: RPM: Fix low network performance + - octeontx2-af: RPM: fix stale RSFEC counters + - octeontx2-af: RPM: fix stale FCFEC counters + - octeontx2-af: Quiesce traffic before NIX block reset + - spi: atmel-quadspi: Fix register name in verbose logging function + - net: hsr: fix hsr_init_sk() vs network/transport headers. + - bnxt_en: Reserve rings after PCIe AER recovery if NIC interface is down + - bnxt_en: Set backplane link modes correctly for ethtool + - bnxt_en: Fix queue start to update vnic RSS table + - bnxt_en: Fix receive ring space parameters when XDP is active + - bnxt_en: Refactor bnxt_ptp_init() + - bnxt_en: Unregister PTP during PCI shutdown and suspend + - Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync + - Bluetooth: MGMT: Fix possible deadlocks + - llc: Improve setsockopt() handling of malformed user input + - rxrpc: Improve setsockopt() handling of malformed user input + - tcp: Fix use-after-free of nreq in reqsk_timer_handler(). + - ip6mr: fix tables suspicious RCU usage + - ipmr: fix tables suspicious RCU usage + - iio: light: al3010: Fix an error handling path in al3010_probe() + - usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read() + - usb: yurex: make waiting on yurex_write interruptible + - USB: chaoskey: fail open after removal + - USB: chaoskey: Fix possible deadlock chaoskey_list_lock + - misc: apds990x: Fix missing pm_runtime_disable() + - devres: Fix page faults when tracing devres from unloaded modules + - usb: gadget: uvc: wake pump everytime we update the free list + - interconnect: qcom: icc-rpmh: probe defer incase of missing QoS clock + dependency + - iio: backend: fix wrong pointer passed to IS_ERR() + - iio: adc: ad4000: fix reading unsigned data + - iio: adc: ad4000: Check for error code from devm_mutex_init() call + - iio: adc: pac1921: Check for error code from devm_mutex_init() call + - iio: accel: adxl380: fix raw sample read + - phy: realtek: usb: fix NULL deref in rtk_usb2phy_probe + - phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe + - counter: stm32-timer-cnt: Add check for clk_enable() + - counter: ti-ecap-capture: Add check for clk_enable() + - bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian + - usb: typec: fix potential array underflow in ucsi_ccg_sync_control() + - firmware_loader: Fix possible resource leak in fw_log_firmware_info() + - ALSA: hda/realtek: Update ALC256 depop procedure + - drm/radeon: Fix spurious unplug event on radeon HDMI + - drm/amd/display: Fix null check for pipe_ctx->plane_state in + dcn20_program_pipe + - drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp + - ASoC: imx-audmix: Add NULL check in imx_audmix_probe + - drm/xe/ufence: Wake up waiters after setting ufence->signalled + - apparmor: fix 'Do simple duplicate message elimination' + - ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() + - ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry + - ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe + - s390/pci: Fix potential double remove of hotplug slot + - f2fs: fix fiemap failure issue when page size is 16KB + - net_sched: sch_fq: don't follow the fast path if Tx is behind now + - xen: Fix the issue of resource not being properly released in + xenbus_dev_probe() + - ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox + devices + - ALSA: usb-audio: Fix out of bounds reads when finding clock sources + - usb: ehci-spear: fix call balance of sehci clk handling routines + - usb: typec: ucsi: glink: fix off-by-one in connector_status + - xfs: fix simplify extent lookup in xfs_can_free_eofblocks + - ext4: supress data-race warnings in ext4_free_inodes_{count,set}() + - ext4: fix FS_IOC_GETFSMAP handling + - MAINTAINERS: update location of media main tree + - docs: media: update location of the media patches + - jfs: xattr: check invalid xattr size more strictly + - ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 + 21MES00B00 + - ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata() + - ASoC: da7213: Populate max_register to regmap_config + - perf/x86/intel/pt: Fix buffer full but size is 0 case + - crypto: x86/aegis128 - access 32-bit arguments as 32-bit + - KVM: x86: switch hugepage recovery thread to vhost_task + - KVM: x86/mmu: Skip the "try unsync" path iff the old SPTE was a leaf SPTE + - KVM: x86: add back X86_LOCAL_APIC dependency + - KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD + - powerpc/pseries: Fix KVM guest detection for disabling hardlockup detector + - KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR + - KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status + - Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of + setup_vmcs_config()" + - KVM: arm64: Don't retire aborted MMIO instruction + - KVM: arm64: vgic-its: Clear ITE when DISCARD frees an ITE + - KVM: arm64: Get rid of userspace_irqchip_in_use + - KVM: arm64: vgic-its: Add a data length check in vgic_its_save_* + - KVM: arm64: vgic-its: Clear DTE when MAPD unmaps a device + - Compiler Attributes: disable __counted_by for clang < 19.1.3 + - PCI: Fix use-after-free of slot->bus on hot remove + - LoongArch: Explicitly specify code model in Makefile + - clk: clk-loongson2: Fix memory corruption bug in struct + loongson2_clk_provider + - clk: clk-loongson2: Fix potential buffer overflow in flexible-array member + access + - fsnotify: fix sending inotify event with unexpected filename + - fsnotify: Fix ordering of iput() and watched_objects decrement + - comedi: Flush partial mappings in error case + - apparmor: test: Fix memory leak for aa_unpack_strdup() + - iio: dac: adi-axi-dac: fix wrong register bitfield + - tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler + - locking/lockdep: Avoid creating new name string literals in + lockdep_set_subclass() + - tools/nolibc: s390: include std.h + - fcntl: make F_DUPFD_QUERY associative + - pinctrl: qcom: spmi: fix debugfs drive strength + - dt-bindings: pinctrl: samsung: Fix interrupt constraint for variants with + fallbacks + - dt-bindings: iio: dac: ad3552r: fix maximum spi speed + - exfat: fix uninit-value in __exfat_get_dentry_set + - exfat: fix out-of-bounds access of directory entries + - xhci: Fix control transfer error on Etron xHCI host + - xhci: Combine two if statements for Etron xHCI host + - xhci: Don't perform Soft Retry for Etron xHCI host + - xhci: Don't issue Reset Device command to Etron xHCI host + - Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}() + - usb: xhci: Limit Stop Endpoint retries + - usb: xhci: Fix TD invalidation under pending Set TR Dequeue + - usb: xhci: Avoid queuing redundant Stop Endpoint commands + - ARM: dts: omap36xx: declare 1GHz OPP as turbo again + - wifi: ath12k: fix warning when unbinding + - wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of + failures + - wifi: nl80211: fix bounds checker error in nl80211_parse_sched_scan + - wifi: ath12k: fix crash when unbinding + - wifi: brcmfmac: release 'root' node in all execution paths + - Revert "fs: don't block i_writecount during exec" + - Revert "f2fs: remove unreachable lazytime mount option parsing" + - Revert "usb: gadget: composite: fix OS descriptors w_value logic" + - serial: sh-sci: Clean sci_ports[0] after at earlycon exit + - Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" + - io_uring: fix corner case forgetting to vunmap + - io_uring: check for overflows in io_pin_pages + - blk-settings: round down io_opt to physical_block_size + - gpio: exar: set value when external pull-up or pull-down is present + - netfilter: ipset: add missing range check in bitmap_ip_uadt + - spi: Fix acpi deferred irq probe + - mtd: spi-nor: core: replace dummy buswidth from addr to data + - cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power() + - cifs: support mounting with alternate password to allow password rotation + - parisc/ftrace: Fix function graph tracing disablement + - RISC-V: Scalar unaligned access emulated on hotplug CPUs + - RISC-V: Check scalar unaligned access on all CPUs + - ksmbd: fix use-after-free in SMB request handling + - smb: client: fix NULL ptr deref in crypto_aead_setkey() + - platform/chrome: cros_ec_typec: fix missing fwnode reference decrement + - irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain + - x86/CPU/AMD: Terminate the erratum_1386_microcode array + - ubi: wl: Put source PEB into correct list if trying locking LEB failed + - um: ubd: Do not use drvdata in release + - um: net: Do not use drvdata in release + - dt-bindings: serial: rs485: Fix rs485-rts-delay property + - serial: 8250_fintek: Add support for F81216E + - serial: 8250: omap: Move pm_runtime_get_sync + - serial: amba-pl011: Fix RX stall when DMA is used + - serial: amba-pl011: fix build regression + - Revert "block, bfq: merge bfq_release_process_ref() into + bfq_put_cooperator()" + - mtd: ubi: fix unreleased fwnode_handle in find_volume_fwnode() + - block: Prevent potential deadlock in blk_revalidate_disk_zones() + - um: vector: Do not use drvdata in release + - sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK + - iio: gts: Fix uninitialized symbol 'ret' + - ublk: fix ublk_ch_mmap() for 64K page size + - arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled + - block: fix missing dispatching request when queue is started or unquiesced + - block: fix ordering between checking QUEUE_FLAG_QUIESCED request adding + - block: fix ordering between checking BLK_MQ_S_STOPPED request adding + - blk-mq: Make blk_mq_quiesce_tagset() hold the tag list mutex less long + - gve: Flow steering trigger reset only for timeout error + - HID: wacom: Interpret tilt data from Intuos Pro BT as signed values + - i40e: Fix handling changed priv flags + - media: wl128x: Fix atomicity violation in fmc_send_cmd() + - media: intel/ipu6: do not handle interrupts when device is disabled + - arm64: dts: mediatek: mt8186-corsola-voltorb: Merge speaker codec nodes + - netdev-genl: Hold rcu_read_lock in napi_get + - soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure + - soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting() + - media: v4l2-core: v4l2-dv-timings: check cvt/gtf result + - x86/mm: Carve out INVLPG inline asm for use by others + - x86/microcode/AMD: Flush patch buffer mapping after application + - ALSA: rawmidi: Fix kvfree() call in spinlock + - ALSA: ump: Fix evaluation of MIDI 1.0 FB info + - ALSA: pcm: Add sanity NULL check for the default mmap fault handler + - ALSA: hda/realtek: Update ALC225 depop procedure + - ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform + - ALSA: hda/realtek: Set PCBeep to default value for ALC274 + - ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max + - ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i + - ALSA: hda/realtek: Apply quirk for Medion E15433 + - fs/smb/client: implement chmod() for SMB3 POSIX Extensions + - smb: client: fix use-after-free of signing key + - smb3: request handle caching when caching directories + - smb: client: handle max length for SMB symlinks + - smb: Don't leak cfid when reconnect races with open_cached_dir + - smb: prevent use-after-free due to open_cached_dir error paths + - smb: During unmount, ensure all cached dir instances drop their dentry + - usb: misc: ljca: set small runtime autosuspend delay + - usb: misc: ljca: move usb_autopm_put_interface() after wait for response + - usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED + - usb: musb: Fix hardware lockup on first Rx endpoint request + - usb: dwc3: gadget: Add missing check for single port RAM in TxFIFO resizing + logic + - usb: dwc3: gadget: Fix checking for number of TRBs left + - usb: dwc3: gadget: Fix looping of queued SG entries + - staging: vchiq_arm: Fix missing refcount decrement in error path for fw_node + - counter: stm32-timer-cnt: fix device_node handling in probe_encoder() + - ublk: fix error code for unsupported command + - lib: string_helpers: silence snprintf() output truncation warning + - f2fs: fix to do sanity check on node blkaddr in truncate_node() + - ipc: fix memleak if msg_init_ns failed in create_ipc_ns + - Input: cs40l50 - fix wrong usage of INIT_WORK() + - NFSD: Prevent a potential integer overflow + - SUNRPC: make sure cache entry active before cache_show + - um: Fix potential integer overflow during physmem setup + - um: Fix the return value of elf_core_copy_task_fpregs + - kfifo: don't include dma-mapping.h in kfifo.h + - um: ubd: Initialize ubd's disk pointer in ubd_add + - um: Always dump trace for specified task in show_stack + - NFSv4.0: Fix a use-after-free problem in the asynchronous open() + - nfs/localio: must clear res.replen in nfs_local_read_done + - rtc: st-lpc: Use IRQF_NO_AUTOEN flag in request_irq() + - rtc: abx80x: Fix WDT bit position of the status register + - rtc: check if __rtc_read_time was successful in rtc_timer_do_work() + - ubi: fastmap: wl: Schedule fm_work if wear-leveling pool is empty + - ubifs: Correct the total block count by deducting journal reservation + - ubi: fastmap: Fix duplicate slab cache names while attaching + - ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit + - jffs2: fix use of uninitialized variable + - hostfs: Fix the NULL vs IS_ERR() bug for __filemap_get_folio() + - net/9p/usbg: fix handling of the failed kzalloc() memory allocation + - rtc: rzn1: fix BCD to rtc_time conversion errors + - Revert "nfs: don't reuse partially completed requests in + nfs_lock_and_join_requests" + - nvme/multipath: Fix RCU list traversal to use SRCU primitive + - blk-mq: add non_owner variant of start_freeze/unfreeze queue APIs + - block: model freeze & enter queue as lock for supporting lockdep + - block: fix uaf for flush rq while iterating tags + - block: return unsigned int from bdev_io_min + - nvme-fabrics: fix kernel crash while shutting down controller + - 9p/xen: fix init sequence + - 9p/xen: fix release of IRQ + - perf/arm-smmuv3: Fix lockdep assert in ->event_init() + - perf/arm-cmn: Ensure port and device id bits are set properly + - smb: client: disable directory caching when dir_cache_timeout is zero + - x86/Documentation: Update algo in init_size description of boot protocol + - cifs: Fix parsing native symlinks relative to the export + - cifs: Fix parsing reparse point with native symlink in SMB1 non-UNICODE + session + - rtc: ab-eoz9: don't fail temperature reads on undervoltage notification + - Rename .data.unlikely to .data..unlikely + - Rename .data.once to .data..once to fix resetting WARN*_ONCE + - kbuild: deb-pkg: Don't fail if modules.order is missing + - smb: Initialize cfid->tcon before performing network ops + - block: Don't allow an atomic write be truncated in blkdev_write_iter() + - modpost: remove incorrect code in do_eisa_entry() + - cifs: during remount, make sure passwords are in sync + - cifs: unlock on error in smb3_reconfigure() + - nfs: ignore SB_RDONLY when mounting nfs + - sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport + - SUNRPC: timeout and cancel TLS handshake with -ETIMEDOUT + - sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket + - nfs/blocklayout: Don't attempt unregister for invalid block device + - nfs/blocklayout: Limit repeat device registration on failure + - block, bfq: fix bfqq uaf in bfq_limit_depth() + - brd: decrease the number of allocated pages which discarded + - sh: intc: Fix use-after-free bug in register_intc_controller() + - tools/power turbostat: Fix trailing '\n' parsing + - tools/power turbostat: Fix child's argument forwarding + - block: always verify unfreeze lock on the owner task + - block: don't verify IO lock for freeze/unfreeze in elevator_init_mq() + - Linux 6.12.2 + + * Plucky update: v6.12.1 upstream stable release (LP: #2091624) + - hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer + - media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in + uvc_parse_format + - mm/mmap: fix __mmap_region() error handling in rare merge failure case + - Linux 6.12.1 + + * Fix compile warnings (LP: #2089676) + - SAUCE: Revert "UBUNTU: SAUCE: (no-up) Allow filtering of cpufreq drivers" + - SAUCE: r8169: Fix compile warning + + * Intel Be201 Bluetooth hardware error 0x0f on Arrow Lake (LP: #2088151) + - Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaP + + * python perf module missing in realtime kernel (LP: #2089411) + - [Packaging] linux-tools: Link directories rather than individual files + - [Packaging] linux-tools: Fix python perf library packaging + + * Miscellaneous Ubuntu changes + - [Packaging] Fix source file collection + - [Packaging] Build all packages for linux-unstable + - [Packaging] linux-lib-rust: Fix incorrect package name + - [Packaging] linux-tools: Put libperf-jvmti.so into lib/ + - [Packaging] linux-bpf-dev: Restructure packaging + - [Packaging] linux-bpf-dev: Skip packaging for additional kernel flavors + - [Config] updateconfigs following v6.12.2 stable import + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] linux-bpf-dev: Skip packaging for additional + kernel flavors" + - Revert "UBUNTU: [Packaging] linux-bpf-dev: Restructure packaging" + + -- Paolo Pisati Thu, 12 Dec 2024 17:17:27 +0100 + +linux-unstable (6.12.0-4.4) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-4.4 -proposed tracker (LP: #2089753) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.11.12) + + * Random flickering with Intel i915 (Comet Lake and Kaby Lake) on Linux 6.8+ + (LP: #2086587) + - SAUCE: iommu/intel: disable DMAR for KBL and CML integrated gfx + + * Miscellaneous Ubuntu changes + - [Packaging] avoid arch-specific certificate creation + + * Miscellaneous upstream changes + - Revert "lsm: remove LSM_COUNT and LSM_CONFIG_COUNT" + - Revert "lsm: replace indirect LSM hook calls with static calls" + - Revert "init/main.c: Initialize early LSMs after arch code, static keys and + calls." + + -- Paolo Pisati Wed, 27 Nov 2024 11:50:01 +0100 + +linux-unstable (6.12.0-3.3) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-3.3 -proposed tracker (LP: #2088427) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.12 rebase + + -- Paolo Pisati Mon, 18 Nov 2024 09:57:30 +0100 + +linux-unstable (6.12.0-2.2) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-2.2 -proposed tracker (LP: #2088046) + + * Miscellaneous Ubuntu changes + - debian.master/dkms-versions: temporarily remove dkmses + + -- Paolo Pisati Wed, 13 Nov 2024 10:59:36 +0100 + +linux-unstable (6.12.0-1.1) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-1.1 -proposed tracker (LP: #2087956) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.11.12) + + * OVTI08F4:00: number of CSI2 data lanes 2 is not supported (LP: #2084059) + - SAUCE: media: ipu-bridge: Add support for additional link frequencies + + * [Oracular] Allow overriding Rust tools (LP: #2084693) + - [Packaging] Allow rust overrides + + * Support ov05c10 camera sensor in Intel ipu-bridge (LP: #2081866) + - SAUCE: media: Support ov05c10 camera sensor + + * Lack of UART boot output on rb3gen2 even with earlycon (LP: #2083559) + - [Config] move qcom clk and serial options as builtin + + * Missing Bluetooth device IDs for new Mediatek MT7920/MT7925 (LP: #2078878) + - SAUCE: Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925 + + * Support Qualcomm WCN7851 Dual Bluetooth Adapter 0489:E0F3 (LP: #2081796) + - SAUCE: Bluetooth: btusb: Add one more ID 0x0489:0xe0f3 for Qualcomm WCN785x + + * re-enable Ubuntu FAN in the Noble kernel (LP: #2064508) + - SAUCE: fan: add VXLAN implementation + - SAUCE: fan: Fix NULL pointer dereference + - SAUCE: fan: support vxlan strict length validation + + * update for V3 kernel bits and improved multiple fan slice support + (LP: #1470091) // re-enable Ubuntu FAN in the Noble kernel (LP: #2064508) + - SAUCE: fan: tunnel multiple mapping mode (v3) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.12 and rename to linux-unstable + - [Config] Update annotations after rebase to v6.12-rc4 + - [Packaging] use DEB_ prefix for some variables + - debian.master/dkms-versions: temporarily remove most dkms packages + - [Packaging] Sort build dependencies alphabetically + - [Packaging] Add list of used source files to buildinfo package + - [Packaging] replace $(DROOT) with debian + - [Config] updateconfigs following v6.12-rc7 rebase + - [packaging] garbage collect some invalid/unnecessary flags + + -- Paolo Pisati Tue, 12 Nov 2024 14:56:47 +0100 + +linux-unstable (6.12.0-0.0) plucky; urgency=medium + + * Dummy entry. + + -- Timo Aaltonen Thu, 03 Oct 2024 15:00:32 +0300 + +linux (6.11.0-8.8) oracular; urgency=medium + + * oracular/linux: 6.11.0-8.8 -proposed tracker (LP: #2080825) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.08.12) + + * [SRU] Disable CONFIG_TCG_TPM2_HMAC to avoid performance loss after v6.10 + (LP: #2080322) + - [Config] disable CONFIG_TCG_TPM2_HMAC by default + + * Integrated Sensor Hub (ISH) support for Intel Lunar Lake platform + (LP: #2071698) + - Documentation: hid: intel-ish-hid: Add vendor custom firmware loading + - HID: intel-ish-hid: Use CPU generation string in driver_data + - hid: intel-ish-hid: Add support for vendor customized firmware loading + + * Miscellaneous Ubuntu changes + - [Packaging] Purge obsolete upstart files + - [Packaging] tools/hv: don't build/install hv_fcopy_uio_daemon on arm64 + - [Config] Update toolchain versions + - SAUCE: rust: Fix rustc source path for the new rustc packaging + - [Packaging] Don't force bindgen version + - [Config] Re-enable rust support for amd64 + + -- Timo Aaltonen Mon, 16 Sep 2024 15:04:18 +0300 + +linux (6.11.0-7.7) oracular; urgency=medium + + * oracular/linux: 6.11.0-7.7 -proposed tracker (LP: #2079949) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [1/99]: LSM: Infrastructure management of the sock + security + - SAUCE: apparmor4.0.0 [2/99]: LSM: Add the lsmblob data structure. + - SAUCE: apparmor4.0.0 [3/99]: LSM: Use lsmblob in security_audit_rule_match + - SAUCE: apparmor4.0.0 [4/99]: LSM: Call only one hook for audit rules + - SAUCE: apparmor4.0.0 [5/99]: LSM: Add lsmblob_to_secctx hook + - SAUCE: apparmor4.0.0 [6/99]: Audit: maintain an lsmblob in audit_context + - SAUCE: apparmor4.0.0 [7/99]: LSM: Use lsmblob in security_ipc_getsecid + - SAUCE: apparmor4.0.0 [8/99]: Audit: Update shutdown LSM data + - SAUCE: apparmor4.0.0 [9/99]: LSM: Use lsmblob in security_current_getsecid + - SAUCE: apparmor4.0.0 [10/99]: LSM: Use lsmblob in security_inode_getsecid + - SAUCE: apparmor4.0.0 [11/99]: Audit: use an lsmblob in audit_names + - SAUCE: apparmor4.0.0 [12/99]: LSM: Create new security_cred_getlsmblob LSM + hook + - SAUCE: apparmor4.0.0 [13/99]: Audit: Change context data from secid to + lsmblob + - SAUCE: apparmor4.0.0 [14/99]: Netlabel: Use lsmblob for audit data + - SAUCE: apparmor4.0.0 [15/99]: LSM: Ensure the correct LSM context releaser + - SAUCE: apparmor4.0.0 [16/99]: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [17/99]: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [18/99]: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [19/99]: LSM: lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [20/99]: LSM: security_lsmblob_to_secctx module + selection + - SAUCE: apparmor4.0.0 [21/99]: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [22/99]: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [23/99]: Audit: Add record for multiple task security + contexts + - SAUCE: apparmor4.0.0 [24/99]: audit: multiple subject lsm values for + netlabel + - SAUCE: apparmor4.0.0 [25/99]: Audit: Add record for multiple object contexts + - SAUCE: apparmor4.0.0 [26/99]: LSM: Remove unused lsmcontext_init() + - SAUCE: apparmor4.0.0 [27/99]: LSM: Improve logic in security_getprocattr + - SAUCE: apparmor4.0.0 [28/99]: LSM: secctx provider check on release + - SAUCE: apparmor4.0.0 [29/99]: LSM: Single calls in socket_getpeersec hooks + - SAUCE: apparmor4.0.0 [30/99]: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [31/99]: LSM: Identify which LSM handles the context + string + - SAUCE: apparmor4.0.0 [32/99]: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [33/99]: LSM: Add mount opts blob size tracking + - SAUCE: apparmor4.0.0 [34/99]: LSM: allocate mnt_opts blobs instead of module + specific data + - SAUCE: apparmor4.0.0 [35/99]: LSM: Infrastructure management of the key + security blob + - SAUCE: apparmor4.0.0 [36/99]: LSM: Infrastructure management of the mnt_opts + security blob + - SAUCE: apparmor4.0.0 [37/99]: LSM: Remove lsmblob scaffolding + - SAUCE: apparmor4.0.0 [38/99]: LSM: Allow reservation of netlabel + - SAUCE: apparmor4.0.0 [39/99]: LSM: restrict security_cred_getsecid() to a + single LSM + - SAUCE: apparmor4.0.0 [40/99]: Smack: Remove LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [41/99]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [41/99]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [42/99]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [43/99]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [44/99]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [45/99]: af_unix mediation + - SAUCE: apparmor4.0.0 [46/99]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [47/99] fixup inode_set_attr + - SAUCE: apparmor4.0.0 [48/99]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [49/99]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [50/99]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [51/99]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [52/99]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [53/99]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [54/99]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [55/99]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [56/99]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [57/99]: prompt - fix caching + - SAUCE: apparmor4.0.0 [58/99]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [59/99]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [60/99]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [61/99]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [62/99]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [63/99]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [64/93] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [65/99]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [66/99]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [67/99]: userns - make it so special unconfined + profiles can mediate user namespaces + - SAUCE: apparmor4.0.0 [68/99]: add io_uring mediation + - SAUCE: apparmor4.0.0 [69/99]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [70/99]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [71/99]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [72/99]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [73/99]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [74/99]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [75/99]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [76/99]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [77/99]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [78/99]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [79/99]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [80/99]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [81/99]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [82/99]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [83/99]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [84/99]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [85/99]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [86/99]: fixup notify + - SAUCE: apparmor4.0.0 [87/99]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [88/99]: apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [89/99]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0 [90/99]: fix reserved mem for when we save ipv6 + addresses + - SAUCE: apparmor4.0.0 [91/99]: fix address mapping for recvfrom + - SAUCE: apparmor4.0.0 [92/99]: apparmor: add support for 2^24 states to the + dfa state machine. + - SAUCE: apparmor4.0.0 [93/99]: apparmor: advertise to userspace support of + user upcall for file rules. + - SAUCE: apparmor4.0.0 [94/99]: apparmor: allocate xmatch for nullpdf inside + aa_alloc_null + - SAUCE: apparmor4.0.0 [95/99]: apparmor: properly handle cx/px lookup failure + for complain + - SAUCE: apparmor4.0.0 [96/99]: apparmor: fix prompt failing during large down + loads + - SAUCE: apparmor4.0.0 [97/99]: apparmor: fix allow field in notification + - SAUCE: apparmor4.0.0 [98/99]: fix build error with !CONFIG_SECURITY + - SAUCE: apparmor4.0.0 [99/99]: fix build error with in nfs4xdr + + * Intel Lunar Lake / Battlemage enablement (LP: #2076209) + - drm/xe/lnl: Drop force_probe requirement + - drm/xe: Support 'nomodeset' kernel command-line option + - drm/i915/display: Plane capability for 64k phys alignment + - drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed. + - drm/xe: Use separate rpm lockdep map for non-d3cold-capable devices + - drm/xe: Fix NPD in ggtt_node_remove() + - drm/xe/bmg: Drop force_probe requirement + - drm/xe/gsc: Fix FW status if the firmware is already loaded + - drm/xe/gsc: Track the platform in the compatibility version + - drm/xe/gsc: Wedge the device if the GSCCS reset fails + - drm/i915/bios: Update new entries in VBT BDB block definitions + - drm/xe/hwmon: Treat hwmon as a per-device concept + - drm/xe: s/xe_tile_migrate_engine/xe_tile_migrate_exec_queue + - drm/xe: Add xe_vm_pgtable_update_op to xe_vma_ops + - drm/xe: Add xe_exec_queue_last_fence_test_dep + - drm/xe: Add timeout to preempt fences + - drm/xe: Convert multiple bind ops into single job + - drm/xe: Update VM trace events + - drm/xe: Update PT layer with better error handling + - drm/xe: Add VM bind IOCTL error injection + - dma-buf: Split out dma fence array create into alloc and arm functions + - drm/xe: Invalidate media_gt TLBs in PT code + - drm/i915/display: Fix BMG CCS modifiers + - drm/xe: Use xe_pm_runtime_get in xe_bo_move() if reclaim-safe. + - drm/xe: Remove extra dma_fence_put on xe_sync_entry_add_deps failure + + * [24.10 FEAT] [KRN1911] Vertical CPU Polarization Support Stage 2 + (LP: #2072760) + - s390/wti: Introduce infrastructure for warning track interrupt + - s390/wti: Prepare graceful CPU pre-emption on wti reception + - s390/wti: Add wti accounting for missed grace periods + - s390/wti: Add debugfs file to display missed grace periods per cpu + - s390/topology: Add sysctl handler for polarization + - s390/topology: Add config option to switch to vertical during boot + - s390/smp: Add cpu capacities + - s390/hiperdispatch: Introduce hiperdispatch + - s390/hiperdispatch: Add steal time averaging + - s390/hiperdispatch: Add trace events + - s390/hiperdispatch: Add hiperdispatch sysctl interface + - s390/hiperdispatch: Add hiperdispatch debug attributes + - s390/hiperdispatch: Add hiperdispatch debug counters + - [Config] Initial set of new options HIPERDISPATCH_ON and + SCHED_TOPOLOGY_VERTICAL to yes for s390x + + * Remove non-LPAE kernel flavor (LP: #2025265) + - [Packaging] Drop control.d/vars.generic-lpae + + * generate and ship vmlinux.h to allow packages to build BPF CO-RE + (LP: #2050083) + - [Packaging] Don't call dh_all on linux-bpf-dev unless on master kernel + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.11-rc7 rebase + + -- Timo Aaltonen Mon, 09 Sep 2024 13:38:09 +0300 + +linux (6.11.0-6.6) oracular; urgency=medium + + * oracular/linux: 6.11.0-6.6 -proposed tracker (LP: #2077949) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.08.12) + - [Packaging] update Ubuntu.md + + * Pull in latest X13s commits (LP: #2078929) + - arm64: dts: qcom: sc8280xp-x13s: disable PCIe perst pull downs + - arm64: dts: qcom: sc8280xp-x13s: clean up PCIe2a pinctrl node + - media: qcom: camss: Remove use_count guard in stop_streaming + - media: qcom: camss: Fix ordering of pm_runtime_enable + - arm64: dts: qcom: sc8280xp-x13s: Enable RGB sensor + - wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power() + - Revert "wifi: ath11k: restore country code during resume" + - Revert "wifi: ath11k: support hibernation" + - SAUCE: media: ov5675: Fix power on/off delay timings + - SAUCE: media: dt-bindings: Document SC8280XP/SM8350 Venus + - SAUCE: media: venus: core: Remove trailing commas from of match entries + - SAUCE: media: venus: hfi_venus: Support only updating certain bits with + presets + - SAUCE: media: platform: venus: Add optional LLCC path + - SAUCE: media: venus: core: Add SM8350 resource struct + - SAUCE: media: venus: core: Add SC8280XP resource struct + - SAUCE: arm64: dts: qcom: sc8280xp: Add Venus + - SAUCE: arm64: dts: qcom: sc8280xp-x13s: Enable Venus + - SAUCE: phy: qcom-qmp-combo: drop regulator loads + - SAUCE: phy: qcom-edp: drop regulator loads + - SAUCE: i2c: qcom-cci: Stop complaining about DT set clock rate + - SAUCE: clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs + + * Intel Lunar Lake / Battlemage enablement (LP: #2076209) + - drm/i915: Skip programming FIA link enable bits for MTL+ + - drm/i915: disable fbc due to Wa_16023588340 + - drm/xe/xe2lpm: Extend Wa_16021639441 + - drm/i915/display: Cache adpative sync caps to use it later + - drm/xe: Generate oob before compiling anything + - drm/i915/display: WA for Re-initialize dispcnlunitt1 xosc clock + - drm/xe/gsc: add Battlemage support + - drm/xe/migrate: Handle clear ccs logic for xe2 dgfx + - drm/xe/migrate: Add helper function to program identity map + - drm/xe/xe2: Introduce identity map for compressed pat for vram + - drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx + - drm/xe/fbdev: Limit the usage of stolen for LNL+ + - drm/xe/uapi: Expose SIMD16 EU mask in topology query + - drm/xe: Fix warning on unreachable statement + - drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability + - drm/i915/hdcp: Add encoder check in hdcp2_get_capability + - drm/xe/hdcp: Check GSC structure validity + - drm/i915/dp: Clear VSC SDP during post ddi disable routine + - drm/xe/huc: Define HuC binary for LNL + - drm/xe/gsc: Define GSC binary for LNL + - drm/xe/huc: Define HuC binary for BMG + - drm/xe/xe2hpg: Introduce performance tuning changes for Xe2_HPG + - drm/i915/display/dp: Compute AS SDP when vrr is also enabled + - drm/xe: Move and export xe_hw_engine lookup. + - drm/xe/xe2: Enable Priority Mem Read + - drm/xe/xe2: Introduce performance changes + - drm/xe/xe2: Add performance turning changes + - drm/xe/guc: Bump minimum required GuC version to v70.29.2 + - drm/xe/guc: Define GuC version v70.29.2 for BMG + - drm/xe/guc: Enable w/a 14022293748 and 22019794406 + - drm/xe: Move enable host l2 VRAM post MCR init + - drm/xe: Write all slices if its mcr register + - drm/xe: Define STATELESS_COMPRESSION_CTRL as mcr register + - drm/i915/pps: Disable DPLS_GATING around pps sequence + - drm/xe: fix engine_class bounds check again + - drm/xe/uc: Use managed bo for HuC and GSC objects + - drm/xe: Use reserved copy engine for user binds on faulting devices + - drm/xe/display: Match i915 driver suspend/resume sequences better + - drm/i915: move rawclk from runtime to display runtime info + - drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO() + - drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled + - drm/i915/display: Don't enable decompression on Xe2 with Tile4 + - drm/fourcc: define Intel Xe2 related tile4 ccs modifiers + - drm/i915/display: allow creation of Xe2 ccs framebuffers + - drm/xe/display: fix compat IS_DISPLAY_STEP() range end + - drm/xe/display: remove intel_display_step_name() to simplify + - drm/xe/display: remove the unused compat HAS_GMD_ID() + - drm/xe/step: define more steppings E-J + - drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL() + - drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP() + - drm/i915/display: identify display steppings in display probe + - drm/i915/display: switch to display detected steppings + - drm/i915: remove display stepping handling + - drm/xe: remove display stepping handling + - drm/xe: Removed unused xe_ggtt_printk + - drm/xe: Introduce GGTT documentation + - drm/xe: Remove unnecessary drm_mm.h includes + - drm/{i915, xe}: Avoid direct inspection of dpt_vma from outside dpt + - drm/xe: Encapsulate drm_mm_node inside xe_ggtt_node + - drm/xe: Rename xe_ggtt_node related functions + - drm/xe: Limit drm_mm_node_allocated access to xe_ggtt_node + - drm/xe: Introduce xe_ggtt_largest_hole + - drm/xe: Introduce xe_ggtt_print_holes + - drm/xe: Refactor xe_ggtt balloon functions to make the node clear + - drm/xe: Make xe_ggtt_node struct independent + - drm/xe: Fix missing runtime outer protection for ggtt_remove_node + - drm/xe: Move ggtt_fini to devm managed + - drm/xe: Set firmware state to loadable before registering guc_fini_hw + - drm/xe: Drop warn on xe_guc_pc_gucrc_disable in guc pc fini + - drm/xe: Move hw_engine_fini to devm managed + - drm/xe: Update xe_sa to use xe_managed_bo_create_pin_map + - drm/xe: Suspend/resume user access only during system s/r + - drm/xe: Handle polling only for system s/r in xe_display_pm_suspend/resume() + - drm/xe/display: handle HPD polling in display runtime suspend/resume + - drm/xe: Fix total initialization in xe_ggtt_print_holes() + + * Missing device ID for amd_atl for AMD platforms Kraken and Strix-Halo + (LP: #2077922) + - x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h + - x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h-70h + + * generate and ship vmlinux.h to allow packages to build BPF CO-RE + (LP: #2050083) + - [Packaging] add linux-bpf-dev package + - [Packaging] do not attempt to generate BTF header on armhf + + * Fix ethernet performance on JSL and EHL (LP: #2077858) + - intel_idle: Disable promotion to C1E on Jasper Lake and Elkhart Lake + + * Regression: unable to reach low idle states on Tiger Lake (LP: #2072679) + - SAUCE: PCI: ASPM: Allow OS to configure ASPM where BIOS is incapable of + - SAUCE: PCI: vmd: Let OS control ASPM for devices under VMD domain + + * Random flickering with Intel i915 (Gen9 GPUs in 6th-8th gen CPUs) on Linux + 6.8 (LP: #2062951) + - SAUCE: iommu/intel: disable DMAR for SKL integrated gfx + + * Make linux-tools-common Provide linux-cpupower (LP: #1960841) + - [Packaging] Add linux-cpupower to linux-tools-common Provides + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0: fix build error with !CONFIG_SECURITY + - [Config] updateconfigs following v6.11-rc6 rebase + - SAUCE: apparmor4.0.0: fix build after rebase to v6.11-rc6 + - [Packaging] perf: reenable libtraceevent + + -- Timo Aaltonen Wed, 04 Sep 2024 17:12:57 +0300 + +linux (6.11.0-5.5) oracular; urgency=medium + + * oracular/linux: 6.11.0-5.5 -proposed tracker (LP: #2077454) + + * GDS force mitigation re-enabled in 6.10 (and 6.11) causing crashes + (LP: #2077145) + - [Config] Force disable CONFIG_MITIGATION_GDS_FORCE again + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.11-rc5 rebase + + -- Timo Aaltonen Mon, 26 Aug 2024 17:11:19 +0300 + +linux (6.11.0-4.4) oracular; urgency=medium + + * oracular/linux: 6.11.0-4.4 -proposed tracker (LP: #2077394) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Config] Disable CONFIG_DRM_I915_REPLAY_GPU_HANGS_API + - [Packaging] carry ELF_PACKAGE_METADATA into relinking + - [Packaging] Rename to linux + + -- Timo Aaltonen Tue, 20 Aug 2024 12:07:08 +0300 + +linux (6.11.0-3.3) oracular; urgency=medium + + * dummy entry + + -- Timo Aaltonen Tue, 20 Aug 2024 10:30:29 +0300 + +linux-unstable (6.11.0-3.3) oracular; urgency=medium + + * oracular/linux-unstable: 6.11.0-3.3 -proposed tracker (LP: #2077292) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.08.12) + + * Disable PCI_DYNAMIC_OF_NODES in Ubuntu (LP: #2074376) + - [Config] Disable PCI_DYNAMIC_OF_NODES + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.11-rc3 rebase + + -- Timo Aaltonen Mon, 19 Aug 2024 11:49:32 +0300 + +linux-unstable (6.11.0-2.2) oracular; urgency=medium + + * oracular/linux-unstable: 6.11.0-2.2 -proposed tracker (LP: #2076564) + + * please help enable more EROFS compression algorithms (LP: #2074049) + - [Config] enable LZMA and ZSTD file compressions in EROFS + + * Enable CONFIG_EXFAT_FS in s390x too (LP: #2076428) + - [Config] Enable EXFAT_FS on s390x too + + * Miscellaneous Ubuntu changes + - [Packaging] Disable tools/perf on armhf (FTBFS) + - [Config] toolchain version update + + * Miscellaneous Ubuntu changes + - UBUNTU: Rebase on v6.11-rc3 + + -- Timo Aaltonen Mon, 12 Aug 2024 14:07:05 +0300 + +linux-unstable (6.11.0-1.1) oracular; urgency=medium + + * oracular/linux-unstable: 6.11.0-1.1 -proposed tracker (LP: #2076116) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.11 and rename to linux-unstable + - [Config] updateconfigs following v6.11-rc2 rebase + - SAUCE: hwmon: Fix aaeon driver for 6.11. + - debian.master/dkms-versions: temporarily remove all dkms + + -- Timo Aaltonen Mon, 05 Aug 2024 20:10:11 +0300 + +linux-unstable (6.11.0-0.0) oracular; urgency=medium + + * Dummy entry. + + -- Timo Aaltonen Wed, 31 Jul 2024 16:41:50 +0300 + +linux (6.10.0-18.18) oracular; urgency=medium + + * oracular/linux: 6.10.0-18.18 -proposed tracker (LP: #2073754) + + * net:fib_rule_tests.sh in ubuntu_kselftests_net fails on Noble (LP: #2066332) + - Revert "UBUNTU: SAUCE: selftests: net: fix "from" match test in + fib_rule_tests.sh" + + * Pull-request to address TPM bypass issue (LP: #2037688) + - [Config]: Configure TPM drivers as builtins for arm64 in annotations + + * kdump doesn't work with UEFI secure boot and kernel lockdown enabled on + ARM64 (LP: #2033007) + - [Config]: Enable CONFIG_KEXEC_IMAGE_VERIFY_SIG on arm64 + + * Miscellaneous Ubuntu changes + - SAUCE: s390/setup: Fix __pa/__va for modules under non-GPL licenses + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] debian.master/dkms-versions -- disable zfs for + s390x" + + -- Paolo Pisati Mon, 22 Jul 2024 13:43:47 +0200 + +linux (6.10.0-17.17) oracular; urgency=medium + + * oracular/linux: 6.10.0-17.17 -proposed tracker (LP: #2073091) + + * Miscellaneous Ubuntu changes + - rebase on v6.10 + + -- Paolo Pisati Mon, 15 Jul 2024 10:29:49 +0200 + +linux (6.10.0-16.16) oracular; urgency=medium + + * oracular/linux: 6.10.0-16.16 -proposed tracker (LP: #2072507) + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc7 + + -- Paolo Pisati Mon, 08 Jul 2024 17:52:01 +0200 + +linux (6.10.0-15.15) oracular; urgency=medium + + * oracular/linux: 6.10.0-15.15 -proposed tracker (LP: #2071915) + + * [UBUNTU 24.04] IOMMU DMA mode changed in kernel config causes massive + throughput degradation for PCI-related network workloads (LP: #2071471) + - [Config] Set IOMMU_DEFAULT_DMA_STRICT=n and IOMMU_DEFAULT_DMA_LAZY=yes for + s390x + + * Miscellaneous Ubuntu changes + - rename to linux + + -- Paolo Pisati Thu, 04 Jul 2024 12:12:06 +0200 + +linux-unstable (6.10.0-14.14) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-14.14 -proposed tracker (LP: #2071786) + + * zfs-dkms FTBFS on Linux 6.10/s390x (LP: #2071774) + - [Packaging] debian.master/dkms-versions -- disable zfs for s390x + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.06.11) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [42/92]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [42/92]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [43/92]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [44/92]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [45/92]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [46/92]: af_unix mediation + - SAUCE: apparmor4.0.0 [47/92]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/92]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/92]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/92]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/92]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/92]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/92]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/92]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/92]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/92]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/92]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/92]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/92]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/92]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/92]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/92]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/92]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/93] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/92]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/92]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/92]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/92]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/92]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/92]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/92]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/92]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/92]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/92]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/92]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/92]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/92]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/92]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/92]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/92]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/92]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/92]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/92]: fixup notify + - SAUCE: apparmor4.0.0 [88/92]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [89/92]: apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [90/92]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0 [91/92]: fix reserved mem for when we save ipv6 + addresses + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * linux-gcp 6.8.0-1005.5 (+ others) Noble kernel regression with new apparmor + profiles/features (LP: #2061851) + - SAUCE: apparmor4.0.0 [92/92]: fix address mapping for recvfrom + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/92]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/92]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/92]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0 [1/92]: LSM: Infrastructure management of the sock + security + - SAUCE: apparmor4.0.0 [2/92]: LSM: Add the lsmblob data structure. + - SAUCE: apparmor4.0.0 [3/92]: LSM: Use lsmblob in security_audit_rule_match + - SAUCE: apparmor4.0.0 [4/92]: LSM: Call only one hook for audit rules + - SAUCE: apparmor4.0.0 [5/92]: LSM: Add lsmblob_to_secctx hook + - SAUCE: apparmor4.0.0 [6/92]: Audit: maintain an lsmblob in audit_context + - SAUCE: apparmor4.0.0 [7/92]: LSM: Use lsmblob in security_ipc_getsecid + - SAUCE: apparmor4.0.0 [8/92]: Audit: Update shutdown LSM data + - SAUCE: apparmor4.0.0 [9/92]: LSM: Use lsmblob in security_current_getsecid + - SAUCE: apparmor4.0.0 [10/92]: LSM: Use lsmblob in security_inode_getsecid + - SAUCE: apparmor4.0.0 [11/92]: Audit: use an lsmblob in audit_names + - SAUCE: apparmor4.0.0 [12/92]: LSM: Create new security_cred_getlsmblob LSM + hook + - SAUCE: apparmor4.0.0 [13/92]: Audit: Change context data from secid to + lsmblob + - SAUCE: apparmor4.0.0 [14/92]: Netlabel: Use lsmblob for audit data + - SAUCE: apparmor4.0.0 [15/92]: LSM: Ensure the correct LSM context releaser + - SAUCE: apparmor4.0.0 [16/92]: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [17/92]: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [18/92]: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [19/92]: LSM: lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [20/92]: LSM: security_lsmblob_to_secctx module + selection + - SAUCE: apparmor4.0.0 [21/92]: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [22/92]: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [23/92]: Audit: Add record for multiple task security + contexts + - SAUCE: apparmor4.0.0 [24/92]: audit: multiple subject lsm values for + netlabel + - SAUCE: apparmor4.0.0 [25/92]: Audit: Add record for multiple object contexts + - SAUCE: apparmor4.0.0 [26/92]: LSM: Remove unused lsmcontext_init() + - SAUCE: apparmor4.0.0 [27/92]: LSM: Improve logic in security_getprocattr + - SAUCE: apparmor4.0.0 [28/92]: LSM: secctx provider check on release + - SAUCE: apparmor4.0.0 [29/92]: LSM: Single calls in socket_getpeersec hooks + - SAUCE: apparmor4.0.0 [30/92]: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [31/92]: LSM: Identify which LSM handles the context + string + - SAUCE: apparmor4.0.0 [32/92]: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [33/92]: LSM: Add mount opts blob size tracking + - SAUCE: apparmor4.0.0 [34/92]: LSM: allocate mnt_opts blobs instead of module + specific data + - SAUCE: apparmor4.0.0 [35/92]: LSM: Infrastructure management of the key + security blob + - SAUCE: apparmor4.0.0 [36/92]: LSM: Infrastructure management of the mnt_opts + security blob + - SAUCE: apparmor4.0.0 [37/92]: LSM: Remove lsmblob scaffolding + - SAUCE: apparmor4.0.0 [38/92]: LSM: Allow reservation of netlabel + - SAUCE: apparmor4.0.0 [39/92]: LSM: Correct handling of ENOSYS in + inode_setxattr + - SAUCE: apparmor4.0.0 [40/92]: LSM: restrict security_cred_getsecid() to a + single LSM + - SAUCE: apparmor4.0.0 [41/92]: Smack: Remove LSM_FLAG_EXCLUSIVE + + * Miscellaneous upstream changes + - fixup inode_set_attr + + -- Paolo Pisati Wed, 03 Jul 2024 11:23:40 +0200 + +linux-unstable (6.10.0-13.13) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-13.13 -proposed tracker (LP: #2071598) + + * Miscellaneous Ubuntu changes + - zfs FTBFS on s390x - temporarily disable it + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc6 + + -- Paolo Pisati Mon, 01 Jul 2024 11:57:44 +0200 + +linux-unstable (6.10.0-12.12) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-12.12 -proposed tracker (LP: #2071461) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.06.11) + + * noble:linux: ADT ubuntu-regression-suite misses fakeroot dependency + (LP: #2070042) + - [DEP-8] Add missing fakeroot dependency + + * Add Real-time Linux Analysis tool (rtla) to linux-tools (LP: #2059080) + - [Packaging] add Real-time Linux Analysis tool (rtla) to linux-tools + - [Packaging] update dependencies for rtla + + * failed to enable IPU6 camera sensor on kernel >= 6.8: ivsc_ace + intel_vsc-5db76cf6-0a68-4ed6-9b78-0361635e2447: switch camera to host + failed: -110 (LP: #2067364) + - SAUCE: media: ivsc: csi: don't count privacy on as error + - SAUCE: media: ivsc: csi: add separate lock for v4l2 control handler + - SAUCE: media: ivsc: csi: remove privacy status in struct mei_csi + - SAUCE: mei: vsc: Enhance IVSC chipset stability during warm reboot + - SAUCE: mei: vsc: Enhance SPI transfer of IVSC rom + - SAUCE: mei: vsc: Utilize the appropriate byte order swap function + - SAUCE: mei: vsc: Prevent timeout error with added delay post-firmware + download + + * Miscellaneous Ubuntu changes + - SAUCE: nvme-tcp: Do not terminate commands when in RESETTING + - SAUCE: nvme-tcp: make 'err_work' a delayed work + - SAUCE: nvme-tcp: delay error recovery until the next KATO interval + - SAUCE: nvme-tcp: add recovery_delay to sysfs + - [Packaging] rtla: workaround the empty LD variable + - [Packaging] Check do_lib_rust before linking Rust lib files + - [Config] toolchain version update + + -- Paolo Pisati Fri, 28 Jun 2024 15:37:27 +0200 + +linux-unstable (6.10.0-11.11) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-11.11 -proposed tracker (LP: #2070368) + + * Provide python perf module (LP: #2051560) + - [Packaging] enable perf python module + - [Packaging] provide a wrapper module for python-perf + + * Miscellaneous Ubuntu changes + - [Config] toolchain version update + - [Packaging] Fix python3-setuptools build-dep for tools/perf + + -- Paolo Pisati Tue, 25 Jun 2024 14:53:52 +0200 + +linux-unstable (6.10.0-10.10) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-10.10 -proposed tracker (LP: #2070030) + + * Miscellaneous Ubuntu changes + - [Config] arm64: disable RELR + - [Config] updateconfigs following v6.10-rc5 rebase + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc5 + + -- Paolo Pisati Mon, 24 Jun 2024 10:57:14 +0200 + +linux-unstable (6.10.0-7.7) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-7.7 -proposed tracker (LP: #2069713) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.06.11) + + * Miscellaneous Ubuntu changes + - SAUCE: Revert "mm: remove follow_pfn" + - [Packaging] debian.master/dkms-versions -- remove zfs-linux + + -- Paolo Pisati Tue, 18 Jun 2024 12:13:02 +0200 + +linux-unstable (6.10.0-6.6) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-6.6 -proposed tracker (LP: #2069590) + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc4 + - [Config] updateconfigs following v6.10-rc4 rebase + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc4 + + -- Paolo Pisati Mon, 17 Jun 2024 11:02:49 +0200 + +linux-unstable (6.10.0-5.5) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-5.5 -proposed tracker (LP: #2069031) + + * Miscellaneous Ubuntu changes + - [packaging] remove the kernel configuration for perf + - [Packaging] dkms-build: Support DEB822 sources + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc3 + + -- Paolo Pisati Tue, 11 Jun 2024 12:42:10 +0200 + +linux-unstable (6.10.0-4.4) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-4.4 -proposed tracker (LP: #2067887) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc2 + + -- Paolo Pisati Mon, 03 Jun 2024 11:52:09 +0200 + +linux-unstable (6.10.0-3.3) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-3.3 -proposed tracker (LP: #2067718) + + * Miscellaneous Ubuntu changes + - SAUCE: [packaging] `make scripts_gdb` target is broken upstream, to avoid a + FTBFS, do not try to install GDB_SCRIPTS + + -- Paolo Pisati Fri, 31 May 2024 13:17:14 +0200 + +linux-unstable (6.10.0-2.2) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-2.2 -proposed tracker (LP: #2067473) + + * Miscellaneous Ubuntu changes + - SAUCE: update hv_fcopy_daemon target to hv_fcopy_uio_daemon (following + upstream rename) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] update dependencies for rtla" + - Revert "UBUNTU: [Packaging] add Real-time Linux Analysis tool (rtla) to + linux-tools" + - Revert "UBUNTU: [Packaging] provide a wrapper module for python-perf" + - Revert "UBUNTU: [Packaging] enable perf python module" + + -- Paolo Pisati Wed, 29 May 2024 14:08:53 +0200 + +linux-unstable (6.10.0-1.1) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-1.1 -proposed tracker (LP: #2067390) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.10 and rename to linux-unstable + - [Config] updateconfigs following v6.10-rc1 rebase + - SAUCE: (lockdown) security: use default hook return value + - debian.master/dkms-versions: temporarily remove all dkms + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc1 + + -- Paolo Pisati Tue, 28 May 2024 17:57:38 +0200 + +linux-unstable (6.10.0-0.0) oracular; urgency=medium + + * noble/linux: 6.8.0-34.34 -proposed tracker (LP: #2065167) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2024.04.29) + + -- Roxana Nicolescu Wed, 08 May 2024 13:14:41 +0200 + +linux (6.8.0-32.32) noble; urgency=medium + + * noble/linux: 6.8.0-32.32 -proposed tracker (LP: #2064344) + + * Packaging resync (LP: #1786013) + - [Packaging] drop getabis data + - [Packaging] update variants + - [Packaging] update annotations scripts + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2024.04.29) + + * Enable Nezha board (LP: #1975592) + - [Config] Enable CONFIG_REGULATOR_FIXED_VOLTAGE on riscv64 + + * Enable Nezha board (LP: #1975592) // Enable StarFive VisionFive 2 board + (LP: #2013232) + - [Config] Enable CONFIG_SERIAL_8250_DW on riscv64 + + * RISC-V kernel config is out of sync with other archs (LP: #1981437) + - [Config] Sync riscv64 config with other architectures + + * obsolete out-of-tree ivsc dkms in favor of in-tree one (LP: #2061747) + - ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device + - Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" + - mei: vsc: Unregister interrupt handler for system suspend + - media: ipu-bridge: Add ov01a10 in Dell XPS 9315 + - SAUCE: media: ipu-bridge: Support more sensors + + * Fix after-suspend-mediacard/sdhc-insert test failed (LP: #2042500) + - PCI/ASPM: Move pci_configure_ltr() to aspm.c + - PCI/ASPM: Always build aspm.c + - PCI/ASPM: Move pci_save_ltr_state() to aspm.c + - PCI/ASPM: Save L1 PM Substates Capability for suspend/resume + - PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state() + - PCI/ASPM: Disable L1 before configuring L1 Substates + - PCI/ASPM: Update save_state when configuration changes + + * RTL8852BE fw security fail then lost WIFI function during suspend/resume + cycle (LP: #2063096) + - wifi: rtw89: download firmware with five times retry + + * intel_rapl_common: Add support for ARL and LNL (LP: #2061953) + - powercap: intel_rapl: Add support for Lunar Lake-M paltform + - powercap: intel_rapl: Add support for Arrow Lake + + * Kernel panic during checkbox stress_ng_test on Grace running noble 6.8 + (arm64+largemem) kernel (LP: #2058557) + - aio: Fix null ptr deref in aio_complete() wakeup + + * Avoid creating non-working backlight sysfs knob from ASUS board + (LP: #2060422) + - platform/x86: asus-wmi: Consider device is absent when the read is ~0 + + * Include cifs.ko in linux-modules package (LP: #2042546) + - [Packaging] Replace fs/cifs with fs/smb/client in inclusion list + + * Add Real-time Linux Analysis tool (rtla) to linux-tools (LP: #2059080) + - SAUCE: rtla: fix deb build + - [Packaging] add Real-time Linux Analysis tool (rtla) to linux-tools + - [Packaging] update dependencies for rtla + + * Noble update: v6.8.4 upstream stable release (LP: #2060533) + - Revert "workqueue: Shorten events_freezable_power_efficient name" + - Revert "workqueue: Don't call cpumask_test_cpu() with -1 CPU in + wq_update_node_max_active()" + - Revert "workqueue: Implement system-wide nr_active enforcement for unbound + workqueues" + - Revert "workqueue: Introduce struct wq_node_nr_active" + - Revert "workqueue: RCU protect wq->dfl_pwq and implement accessors for it" + - Revert "workqueue: Make wq_adjust_max_active() round-robin pwqs while + activating" + - Revert "workqueue: Move nr_active handling into helpers" + - Revert "workqueue: Replace pwq_activate_inactive_work() with + [__]pwq_activate_work()" + - Revert "workqueue: Factor out pwq_is_empty()" + - Revert "workqueue: Move pwq->max_active to wq->max_active" + - Revert "workqueue.c: Increase workqueue name length" + - Linux 6.8.4 + + * Noble update: v6.8.3 upstream stable release (LP: #2060531) + - drm/vmwgfx: Unmap the surface before resetting it on a plane state + - wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach + - wifi: brcmfmac: avoid invalid list operation when vendor attach fails + - media: staging: ipu3-imgu: Set fields before media_entity_pads_init() + - arm64: dts: qcom: sc7280: Add additional MSI interrupts + - remoteproc: virtio: Fix wdg cannot recovery remote processor + - clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd + - smack: Set SMACK64TRANSMUTE only for dirs in smack_inode_setxattr() + - smack: Handle SMACK64TRANSMUTE in smack_inode_setsecurity() + - arm: dts: marvell: Fix maxium->maxim typo in brownstone dts + - drm/vmwgfx: Fix possible null pointer derefence with invalid contexts + - arm64: dts: qcom: sm8450-hdk: correct AMIC4 and AMIC5 microphones + - serial: max310x: fix NULL pointer dereference in I2C instantiation + - drm/vmwgfx: Fix the lifetime of the bo cursor memory + - pci_iounmap(): Fix MMIO mapping leak + - media: xc4000: Fix atomicity violation in xc4000_get_frequency + - media: mc: Add local pad to pipeline regardless of the link state + - media: mc: Fix flags handling when creating pad links + - media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access + - media: mc: Add num_links flag to media_pad + - media: mc: Rename pad variable to clarify intent + - media: mc: Expand MUST_CONNECT flag to always require an enabled link + - media: nxp: imx8-isi: Mark all crossbar sink pads as MUST_CONNECT + - md: use RCU lock to protect traversal in md_spares_need_change() + - KVM: Always flush async #PF workqueue when vCPU is being destroyed + - arm64: dts: qcom: sm8550-qrd: correct WCD9385 TX port mapping + - arm64: dts: qcom: sm8550-mtp: correct WCD9385 TX port mapping + - cpufreq: amd-pstate: Fix min_perf assignment in amd_pstate_adjust_perf() + - thermal/intel: Fix intel_tcc_get_temp() to support negative CPU temperature + - powercap: intel_rapl: Fix a NULL pointer dereference + - powercap: intel_rapl: Fix locking in TPMI RAPL + - powercap: intel_rapl_tpmi: Fix a register bug + - powercap: intel_rapl_tpmi: Fix System Domain probing + - powerpc/smp: Adjust nr_cpu_ids to cover all threads of a core + - powerpc/smp: Increase nr_cpu_ids to include the boot CPU + - sparc64: NMI watchdog: fix return value of __setup handler + - sparc: vDSO: fix return value of __setup handler + - selftests/mqueue: Set timeout to 180 seconds + - pinctrl: qcom: sm8650-lpass-lpi: correct Kconfig name + - ext4: correct best extent lstart adjustment logic + - drm/amdgpu/display: Address kdoc for 'is_psr_su' in 'fill_dc_dirty_rects' + - block: Clear zone limits for a non-zoned stacked queue + - kasan/test: avoid gcc warning for intentional overflow + - bounds: support non-power-of-two CONFIG_NR_CPUS + - fat: fix uninitialized field in nostale filehandles + - fuse: fix VM_MAYSHARE and direct_io_allow_mmap + - mfd: twl: Select MFD_CORE + - ubifs: Set page uptodate in the correct place + - ubi: Check for too small LEB size in VTBL code + - ubi: correct the calculation of fastmap size + - ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path + - mtd: rawnand: meson: fix scrambling mode value in command macro + - md/md-bitmap: fix incorrect usage for sb_index + - x86/nmi: Fix the inverse "in NMI handler" check + - parisc/unaligned: Rewrite 64-bit inline assembly of emulate_ldd() + - parisc: Avoid clobbering the C/B bits in the PSW with tophys and tovirt + macros + - parisc: Fix ip_fast_csum + - parisc: Fix csum_ipv6_magic on 32-bit systems + - parisc: Fix csum_ipv6_magic on 64-bit systems + - parisc: Strip upper 32 bit of sum in csum_ipv6_magic for 64-bit builds + - md/raid5: fix atomicity violation in raid5_cache_count + - iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2 + - iio: adc: rockchip_saradc: use mask for write_enable bitfield + - docs: Restore "smart quotes" for quotes + - cpufreq: Limit resolving a frequency to policy min/max + - PM: suspend: Set mem_sleep_current during kernel command line setup + - vfio/pds: Always clear the save/restore FDs on reset + - clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays + - clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays + - clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays + - clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays + - clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays + - clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays + - clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays + - usb: xhci: Add error handling in xhci_map_urb_for_dma + - powerpc/fsl: Fix mfpmr build errors with newer binutils + - USB: serial: ftdi_sio: add support for GMC Z216C Adapter IR-USB + - USB: serial: add device ID for VeriFone adapter + - USB: serial: cp210x: add ID for MGP Instruments PDS100 + - wifi: mac80211: track capability/opmode NSS separately + - USB: serial: option: add MeiG Smart SLM320 product + - KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled + - USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113M + - PM: sleep: wakeirq: fix wake irq warning in system suspend + - mmc: tmio: avoid concurrent runs of mmc_request_done() + - fuse: replace remaining make_bad_inode() with fuse_make_bad() + - fuse: fix root lookup with nonzero generation + - fuse: don't unhash root + - usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros + - usb: dwc3-am62: fix module unload/reload behavior + - usb: dwc3-am62: Disable wakeup at remove + - serial: core: only stop transmit when HW fifo is empty + - serial: Lock console when calling into driver before registration + - btrfs: qgroup: always free reserved space for extent records + - btrfs: fix off-by-one chunk length calculation at contains_pending_extent() + - wifi: rtw88: Add missing VID/PIDs for 8811CU and 8821CU + - docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than + htmldocs + - PCI/PM: Drain runtime-idle callbacks before driver removal + - PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports + - Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"" + - md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume + - md: export helpers to stop sync_thread + - md: export helper md_is_rdwr() + - md: add a new helper reshape_interrupted() + - dm-raid: really frozen sync_thread during suspend + - md/dm-raid: don't call md_reap_sync_thread() directly + - dm-raid: add a new helper prepare_suspend() in md_personality + - dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent + with reshape + - dm-raid: fix lockdep waring in "pers->hot_add_disk" + - powerpc: xor_vmx: Add '-mhard-float' to CFLAGS + - mac802154: fix llsec key resources release in mac802154_llsec_key_del + - mm: swap: fix race between free_swap_and_cache() and swapoff() + - mmc: core: Fix switch on gp3 partition + - Bluetooth: btnxpuart: Fix btnxpuart_close + - leds: trigger: netdev: Fix kernel panic on interface rename trig notify + - drm/etnaviv: Restore some id values + - landlock: Warn once if a Landlock action is requested while disabled + - io_uring: fix mshot read defer taskrun cqe posting + - hwmon: (amc6821) add of_match table + - io_uring: fix io_queue_proc modifying req->flags + - ext4: fix corruption during on-line resize + - nvmem: meson-efuse: fix function pointer type mismatch + - slimbus: core: Remove usage of the deprecated ida_simple_xx() API + - phy: tegra: xusb: Add API to retrieve the port number of phy + - usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic + - speakup: Fix 8bit characters from direct synth + - debugfs: fix wait/cancellation handling during remove + - PCI/AER: Block runtime suspend when handling errors + - io_uring/net: correctly handle multishot recvmsg retry setup + - io_uring: fix mshot io-wq checks + - PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p + - sparc32: Fix parport build with sparc32 + - nfs: fix UAF in direct writes + - NFS: Read unlock folio on nfs_page_create_from_folio() error + - kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 + - PCI: qcom: Enable BDF to SID translation properly + - PCI: dwc: endpoint: Fix advertised resizable BAR size + - PCI: hv: Fix ring buffer size calculation + - cifs: prevent updating file size from server if we have a read/write lease + - cifs: allow changing password during remount + - thermal/drivers/mediatek: Fix control buffer enablement on MT7896 + - vfio/pci: Disable auto-enable of exclusive INTx IRQ + - vfio/pci: Lock external INTx masking ops + - vfio/platform: Disable virqfds on cleanup + - vfio/platform: Create persistent IRQ handlers + - vfio/fsl-mc: Block calling interrupt handler without trigger + - tpm,tpm_tis: Avoid warning splat at shutdown + - ksmbd: replace generic_fillattr with vfs_getattr + - ksmbd: retrieve number of blocks using vfs_getattr in + set_file_allocation_info + - platform/x86/intel/tpmi: Change vsec offset to u64 + - io_uring/rw: return IOU_ISSUE_SKIP_COMPLETE for multishot retry + - io_uring: clean rings on NO_MMAP alloc fail + - ring-buffer: Do not set shortest_full when full target is hit + - ring-buffer: Fix full_waiters_pending in poll + - ring-buffer: Use wait_event_interruptible() in ring_buffer_wait() + - tracing/ring-buffer: Fix wait_on_pipe() race + - dlm: fix user space lkb refcounting + - soc: fsl: qbman: Always disable interrupts when taking cgr_lock + - soc: fsl: qbman: Use raw spinlock for cgr_lock + - s390/zcrypt: fix reference counting on zcrypt card objects + - drm/probe-helper: warn about negative .get_modes() + - drm/panel: do not return negative error codes from drm_panel_get_modes() + - drm/exynos: do not return negative values from .get_modes() + - drm/imx/ipuv3: do not return negative values from .get_modes() + - drm/vc4: hdmi: do not return negative values from .get_modes() + - clocksource/drivers/timer-riscv: Clear timer interrupt on timer + initialization + - memtest: use {READ,WRITE}_ONCE in memory scanning + - Revert "block/mq-deadline: use correct way to throttling write requests" + - lsm: use 32-bit compatible data types in LSM syscalls + - lsm: handle the NULL buffer case in lsm_fill_user_ctx() + - f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag + - f2fs: truncate page cache before clearing flags when aborting atomic write + - nilfs2: fix failure to detect DAT corruption in btree and direct mappings + - nilfs2: prevent kernel bug at submit_bh_wbc() + - cifs: make sure server interfaces are requested only for SMB3+ + - cifs: reduce warning log level for server not advertising interfaces + - cifs: open_cached_dir(): add FILE_READ_EA to desired access + - mtd: rawnand: Fix and simplify again the continuous read derivations + - mtd: rawnand: Add a helper for calculating a page index + - mtd: rawnand: Ensure all continuous terms are always in sync + - mtd: rawnand: Constrain even more when continuous reads are enabled + - cpufreq: dt: always allocate zeroed cpumask + - io_uring/futex: always remove futex entry for cancel all + - io_uring/waitid: always remove waitid entry for cancel all + - x86/CPU/AMD: Update the Zenbleed microcode revisions + - ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16() + - net: esp: fix bad handling of pages from page_pool + - NFSD: Fix nfsd_clid_class use of __string_len() macro + - drm/i915: Add missing ; to __assign_str() macros in tracepoint code + - net: hns3: tracing: fix hclgevf trace event strings + - cxl/trace: Properly initialize cxl_poison region name + - ksmbd: fix potencial out-of-bounds when buffer offset is invalid + - virtio: reenable config if freezing device failed + - LoongArch: Change __my_cpu_offset definition to avoid mis-optimization + - LoongArch: Define the __io_aw() hook as mmiowb() + - LoongArch/crypto: Clean up useless assignment operations + - wireguard: netlink: check for dangling peer via is_dead instead of empty + list + - wireguard: netlink: access device through ctx instead of peer + - wireguard: selftests: set RISCV_ISA_FALLBACK on riscv{32,64} + - ahci: asm1064: asm1166: don't limit reported ports + - drm/amd/display: Change default size for dummy plane in DML2 + - drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag + - drm/amdgpu/pm: Fix NULL pointer dereference when get power limit + - drm/amdgpu/pm: Check the validity of overdiver power limit + - drm/amd/display: Override min required DCFCLK in dml1_validate + - drm/amd/display: Allow dirty rects to be sent to dmub when abm is active + - drm/amd/display: Init DPPCLK from SMU on dcn32 + - drm/amd/display: Update odm when ODM combine is changed on an otg master + pipe with no plane + - drm/amd/display: Fix idle check for shared firmware state + - drm/amd/display: Amend coasting vtotal for replay low hz + - drm/amd/display: Lock all enabled otg pipes even with no planes + - drm/amd/display: Implement wait_for_odm_update_pending_complete + - drm/amd/display: Return the correct HDCP error code + - drm/amd/display: Add a dc_state NULL check in dc_state_release + - drm/amd/display: Fix noise issue on HDMI AV mute + - dm snapshot: fix lockup in dm_exception_table_exit + - x86/pm: Work around false positive kmemleak report in msr_build_context() + - wifi: brcmfmac: add per-vendor feature detection callback + - wifi: brcmfmac: cfg80211: Use WSEC to set SAE password + - wifi: brcmfmac: Demote vendor-specific attach/detach messages to info + - drm/ttm: Make sure the mapped tt pages are decrypted when needed + - drm/amd/display: Unify optimize_required flags and VRR adjustments + - drm/amd/display: Add more checks for exiting idle in DC + - btrfs: add set_folio_extent_mapped() helper + - btrfs: replace sb::s_blocksize by fs_info::sectorsize + - btrfs: add helpers to get inode from page/folio pointers + - btrfs: add helpers to get fs_info from page/folio pointers + - btrfs: add helper to get fs_info from struct inode pointer + - btrfs: qgroup: validate btrfs_qgroup_inherit parameter + - vfio: Introduce interface to flush virqfd inject workqueue + - vfio/pci: Create persistent INTx handler + - drm/bridge: add ->edid_read hook and drm_bridge_edid_read() + - drm/bridge: lt8912b: use drm_bridge_edid_read() + - drm/bridge: lt8912b: clear the EDID property on failures + - drm/bridge: lt8912b: do not return negative values from .get_modes() + - drm/amd/display: Remove pixle rate limit for subvp + - drm/amd/display: Revert Remove pixle rate limit for subvp + - workqueue: Shorten events_freezable_power_efficient name + - drm/amd/display: Use freesync when `DRM_EDID_FEATURE_CONTINUOUS_FREQ` found + - netfilter: nf_tables: reject constant set with timeout + - Revert "crypto: pkcs7 - remove sha1 support" + - x86/efistub: Call mixed mode boot services on the firmware's stack + - ASoC: amd: yc: Revert "Fix non-functional mic on Lenovo 21J2" + - ASoC: amd: yc: Revert "add new YC platform variant (0x63) support" + - Fix memory leak in posix_clock_open() + - wifi: rtw88: 8821cu: Fix connection failure + - x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT + - x86/sev: Fix position dependent variable references in startup code + - clocksource/drivers/arm_global_timer: Fix maximum prescaler value + - ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores + - ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses + - entry: Respect changes to system call number by trace_sys_enter() + - swiotlb: Fix double-allocation of slots due to broken alignment handling + - swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc() + - swiotlb: Fix alignment checks when both allocation and DMA masks are present + - iommu/dma: Force swiotlb_max_mapping_size on an untrusted device + - printk: Update @console_may_schedule in console_trylock_spinning() + - irqchip/renesas-rzg2l: Flush posted write in irq_eoi() + - irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi() + - irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi() + - irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type + - kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address + - efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or + higher address + - x86/mpparse: Register APIC address only once + - x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD + - efi: fix panic in kdump kernel + - pwm: img: fix pwm clock lookup + - selftests/mm: Fix build with _FORTIFY_SOURCE + - btrfs: handle errors returned from unpin_extent_cache() + - btrfs: fix warning messages not printing interval at unpin_extent_range() + - btrfs: do not skip re-registration for the mounted device + - mfd: intel-lpss: Switch to generalized quirk table + - mfd: intel-lpss: Introduce QUIRK_CLOCK_DIVIDER_UNITY for XPS 9530 + - drm/i915: Replace a memset() with zero initialization + - drm/i915: Try to preserve the current shared_dpll for fastset on type-c + ports + - drm/i915: Include the PLL name in the debug messages + - drm/i915: Suppress old PLL pipe_mask checks for MG/TC/TBT PLLs + - crypto: iaa - Fix nr_cpus < nr_iaa case + - drm/amd/display: Prevent crash when disable stream + - ALSA: hda/tas2781: remove digital gain kcontrol + - ALSA: hda/tas2781: add locks to kcontrols + - mm: zswap: fix writeback shinker GFP_NOIO/GFP_NOFS recursion + - init: open /initrd.image with O_LARGEFILE + - x86/efistub: Add missing boot_params for mixed mode compat entry + - efi/libstub: Cast away type warning in use of max() + - x86/efistub: Reinstate soft limit for initrd loading + - prctl: generalize PR_SET_MDWE support check to be per-arch + - ARM: prctl: reject PR_SET_MDWE on pre-ARMv6 + - tmpfs: fix race on handling dquot rbtree + - btrfs: validate device maj:min during open + - btrfs: fix race in read_extent_buffer_pages() + - btrfs: zoned: don't skip block groups with 100% zone unusable + - btrfs: zoned: use zone aware sb location for scrub + - btrfs: zoned: fix use-after-free in do_zone_finish() + - wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes + - wifi: cfg80211: add a flag to disable wireless extensions + - wifi: iwlwifi: mvm: disable MLO for the time being + - wifi: iwlwifi: fw: don't always use FW dump trig + - wifi: iwlwifi: mvm: handle debugfs names more carefully + - Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP + displays without PSR" + - fbdev: Select I/O-memory framebuffer ops for SBus + - exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack() + - hexagon: vmlinux.lds.S: handle attributes section + - mm: cachestat: fix two shmem bugs + - selftests/mm: sigbus-wp test requires UFFD_FEATURE_WP_HUGETLBFS_SHMEM + - selftests/mm: fix ARM related issue with fork after pthread_create + - mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc + HS200 mode + - mmc: core: Initialize mmc_blk_ioc_data + - mmc: core: Avoid negative index with array access + - sdhci-of-dwcmshc: disable PM runtime in dwcmshc_remove() + - block: Do not force full zone append completion in req_bio_endio() + - thermal: devfreq_cooling: Fix perf state when calculate dfc res_util + - Revert "thermal: core: Don't update trip points inside the hysteresis range" + - nouveau/dmem: handle kcalloc() allocation failure + - net: ll_temac: platform_get_resource replaced by wrong function + - net: wan: framer: Add missing static inline qualifiers + - net: phy: qcom: at803x: fix kernel panic with at8031_probe + - drm/xe/query: fix gt_id bounds check + - drm/dp: Fix divide-by-zero regression on DP MST unplug with nouveau + - drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed + - drm/amdkfd: fix TLB flush after unmap for GFX9.4.2 + - drm/amdgpu: fix deadlock while reading mqd from debugfs + - drm/amd/display: Remove MPC rate control logic from DCN30 and above + - drm/amd/display: Set DCN351 BB and IP the same as DCN35 + - drm/i915/hwmon: Fix locking inversion in sysfs getter + - drm/i915/vma: Fix UAF on destroy against retire race + - drm/i915/bios: Tolerate devdata==NULL in + intel_bios_encoder_supports_dp_dual_mode() + - drm/i915/vrr: Generate VRR "safe window" for DSB + - drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly + - drm/i915/dsb: Fix DSB vblank waits when using VRR + - drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed() + - drm/i915: Pre-populate the cursor physical dma address + - drm/i915/gt: Reset queue_priority_hint on parking + - drm/amd/display: Fix bounds check for dcn35 DcfClocks + - Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync + - mtd: spinand: Add support for 5-byte IDs + - Revert "usb: phy: generic: Get the vbus supply" + - usb: cdc-wdm: close race between read and workqueue + - usb: misc: ljca: Fix double free in error handling path + - USB: UAS: return ENODEV when submit urbs fail with device not attached + - vfio/pds: Make sure migration file isn't accessed after reset + - ring-buffer: Make wake once of ring_buffer_wait() more robust + - btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache() + - ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs + - scsi: ufs: qcom: Provide default cycles_in_1us value + - scsi: sd: Fix TCG OPAL unlock on system resume + - scsi: core: Fix unremoved procfs host directory regression + - staging: vc04_services: changen strncpy() to strscpy_pad() + - staging: vc04_services: fix information leak in create_component() + - genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd + - usb: dwc3: Properly set system wakeup + - USB: core: Fix deadlock in usb_deauthorize_interface() + - USB: core: Add hub_get() and hub_put() routines + - USB: core: Fix deadlock in port "disable" sysfs attribute + - usb: dwc2: host: Fix remote wakeup from hibernation + - usb: dwc2: host: Fix hibernation flow + - usb: dwc2: host: Fix ISOC flow in DDMA mode + - usb: dwc2: gadget: Fix exiting from clock gating + - usb: dwc2: gadget: LPM flow fix + - usb: udc: remove warning when queue disabled ep + - usb: typec: ucsi: Fix race between typec_switch and role_switch + - usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd() + - usb: typec: tcpm: Correct port source pdo array in pd_set callback + - usb: typec: tcpm: Update PD of Type-C port upon pd_set + - usb: typec: Return size of buffer if pd_set operation succeeds + - usb: typec: ucsi: Clear EVENT_PENDING under PPM lock + - usb: typec: ucsi: Ack unsupported commands + - usb: typec: ucsi_acpi: Refactor and fix DELL quirk + - usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset + - scsi: qla2xxx: Prevent command send on chip reset + - scsi: qla2xxx: Fix N2N stuck connection + - scsi: qla2xxx: Split FCE|EFT trace control + - scsi: qla2xxx: Update manufacturer detail + - scsi: qla2xxx: NVME|FCP prefer flag not being honored + - scsi: qla2xxx: Fix command flush on cable pull + - scsi: qla2xxx: Fix double free of the ha->vp_map pointer + - scsi: qla2xxx: Fix double free of fcport + - scsi: qla2xxx: Change debug message during driver unload + - scsi: qla2xxx: Delay I/O Abort on PCI error + - x86/bugs: Fix the SRSO mitigation on Zen3/4 + - crash: use macro to add crashk_res into iomem early for specific arch + - drm/amd/display: fix IPX enablement + - x86/bugs: Use fixed addressing for VERW operand + - Revert "x86/bugs: Use fixed addressing for VERW operand" + - usb: dwc3: pci: Drop duplicate ID + - scsi: lpfc: Correct size for cmdwqe/rspwqe for memset() + - scsi: lpfc: Correct size for wqe for memset() + - scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type() + - scsi: libsas: Fix disk not being scanned in after being removed + - perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and + later + - x86/sev: Skip ROM range scans and validation for SEV-SNP guests + - tools/resolve_btfids: fix build with musl libc + - drm/amdgpu: fix use-after-free bug + - drm/sched: fix null-ptr-deref in init entity + - Linux 6.8.3 + - [Config] updateconfigs following v6.8.3 import + + * Noble update: v6.8.3 upstream stable release (LP: #2060531) // + [Ubuntu-24.04] Hugepage memory is not getting released even after destroying + the guest! (LP: #2062556) + - block: Fix page refcounts for unaligned buffers in __bio_release_pages() + + * [SPR][EMR][GNR] TDX: efi: TD Measurement support for kernel cmdline/initrd + sections from EFI stub (LP: #2060130) + - efi/libstub: Use TPM event typedefs from the TCG PC Client spec + - efi/tpm: Use symbolic GUID name from spec for final events table + - efi/libstub: Add Confidential Computing (CC) measurement typedefs + - efi/libstub: Measure into CC protocol if TCG2 protocol is absent + - efi/libstub: Add get_event_log() support for CC platforms + - x86/efistub: Remap kernel text read-only before dropping NX attribute + + * Fix acpi_power_meter accessing IPMI region before it's ready (LP: #2059263) + - ACPI: IPMI: Add helper to wait for when SMI is selected + - hwmon: (acpi_power_meter) Ensure IPMI space handler is ready on Dell systems + + * Drop fips-checks script from trees (LP: #2055083) + - [Packaging] Remove fips-checks script + + * alsa/realtek: adjust max output valume for headphone on 2 LG machines + (LP: #2058573) + - ALSA: hda/realtek: fix the hp playback volume issue for LG machines + + * Noble update: v6.8.2 upstream stable release (LP: #2060097) + - do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak + - workqueue.c: Increase workqueue name length + - workqueue: Move pwq->max_active to wq->max_active + - workqueue: Factor out pwq_is_empty() + - workqueue: Replace pwq_activate_inactive_work() with [__]pwq_activate_work() + - workqueue: Move nr_active handling into helpers + - workqueue: Make wq_adjust_max_active() round-robin pwqs while activating + - workqueue: RCU protect wq->dfl_pwq and implement accessors for it + - workqueue: Introduce struct wq_node_nr_active + - workqueue: Implement system-wide nr_active enforcement for unbound + workqueues + - workqueue: Don't call cpumask_test_cpu() with -1 CPU in + wq_update_node_max_active() + - iomap: clear the per-folio dirty bits on all writeback failures + - fs: Fix rw_hint validation + - io_uring: remove looping around handling traditional task_work + - io_uring: remove unconditional looping in local task_work handling + - s390/dasd: Use dev_*() for device log messages + - s390/dasd: fix double module refcount decrement + - fs/hfsplus: use better @opf description + - md: fix kmemleak of rdev->serial + - rcu/exp: Fix RCU expedited parallel grace period kworker allocation failure + recovery + - rcu/exp: Handle RCU expedited grace period kworker allocation failure + - fs/select: rework stack allocation hack for clang + - block: fix deadlock between bd_link_disk_holder and partition scan + - md: Don't clear MD_CLOSING when the raid is about to stop + - kunit: Setup DMA masks on the kunit device + - ovl: Always reject mounting over case-insensitive directories + - kunit: test: Log the correct filter string in executor_test + - lib/cmdline: Fix an invalid format specifier in an assertion msg + - lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg + - time: test: Fix incorrect format specifier + - rtc: test: Fix invalid format specifier. + - net: test: Fix printf format specifier in skb_segment kunit test + - drm/xe/tests: Fix printf format specifiers in xe_migrate test + - drm: tests: Fix invalid printf format specifiers in KUnit tests + - md/raid1: factor out helpers to add rdev to conf + - md/raid1: record nonrot rdevs while adding/removing rdevs to conf + - md/raid1: fix choose next idle in read_balance() + - io_uring/net: unify how recvmsg and sendmsg copy in the msghdr + - io_uring/net: move receive multishot out of the generic msghdr path + - io_uring/net: fix overflow check in io_recvmsg_mshot_prep() + - nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() + - aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts + - x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type + - x86/resctrl: Remove hard-coded memory bandwidth limit + - x86/resctrl: Read supported bandwidth sources from CPUID + - x86/resctrl: Implement new mba_MBps throttling heuristic + - x86/sme: Fix memory encryption setting if enabled by default and not + overridden + - timekeeping: Fix cross-timestamp interpolation on counter wrap + - timekeeping: Fix cross-timestamp interpolation corner case decision + - timekeeping: Fix cross-timestamp interpolation for non-x86 + - x86/asm: Remove the __iomem annotation of movdir64b()'s dst argument + - sched/fair: Take the scheduling domain into account in select_idle_smt() + - sched/fair: Take the scheduling domain into account in select_idle_core() + - wifi: ath10k: fix NULL pointer dereference in + ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() + - wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled + - wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled + - wifi: b43: Stop correct queue in DMA worker when QoS is disabled + - wifi: b43: Disable QoS for bcm4331 + - wifi: wilc1000: fix declarations ordering + - wifi: wilc1000: fix RCU usage in connect path + - wifi: ath11k: add support to select 6 GHz regulatory type + - wifi: ath11k: store cur_regulatory_info for each radio + - wifi: ath11k: fix a possible dead lock caused by ab->base_lock + - wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work + - wifi: wilc1000: do not realloc workqueue everytime an interface is added + - wifi: wilc1000: fix multi-vif management when deleting a vif + - wifi: mwifiex: debugfs: Drop unnecessary error check for + debugfs_create_dir() + - ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate + - arm64: dts: qcom: x1e80100: drop qcom,drv-count + - arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain + - arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency + - arm64: dts: qcom: sc8180x: Add missing CPU off state + - arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains + - arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX + - arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is on + - arm64: dts: qcom: sc8180x: Add missing CPU<->MDP_CFG path + - arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size + - cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value + - cpufreq: mediatek-hw: Wait for CPU supplies before probing + - sock_diag: annotate data-races around sock_diag_handlers[family] + - inet_diag: annotate data-races around inet_diag_table[] + - bpftool: Silence build warning about calloc() + - selftests/bpf: Fix potential premature unload in bpf_testmod + - libbpf: Apply map_set_def_max_entries() for inner_maps on creation + - selftest/bpf: Add map_in_maps with BPF_MAP_TYPE_PERF_EVENT_ARRAY values + - bpftool: Fix wrong free call in do_show_link + - wifi: ath12k: Fix issues in channel list update + - selftests/bpf: Fix the flaky tc_redirect_dtime test + - selftests/bpf: Wait for the netstamp_needed_key static key to be turned on + - wifi: cfg80211: add RNR with reporting AP information + - wifi: mac80211: use deflink and fix typo in link ID check + - wifi: iwlwifi: change link id in time event to s8 + - af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc(). + - arm64: dts: qcom: sm8450: Add missing interconnects to serial + - soc: qcom: socinfo: rename PM2250 to PM4125 + - arm64: dts: qcom: sc7280: Add static properties to cryptobam + - arm64: dts: qcom: qcm6490-fairphone-fp5: Add missing reserved-memory + - arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming + - arm64: dts: qcom: rename PM2250 to PM4125 + - cpufreq: mediatek-hw: Don't error out if supply is not found + - libbpf: Fix faccessat() usage on Android + - libbpf: fix __arg_ctx type enforcement for perf_event programs + - pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl + - arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc + - arm64: dts: renesas: r8a779g0: Restore sort order + - arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 + - selftests/bpf: Disable IPv6 for lwt_redirect test + - arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S i.MX8MM + - arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL i.MX8MM + - arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL + OSM-S board + - arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL + board + - arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL + OSM-S board + - arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL + board + - arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module + - arm64: dts: imx8qm: Align edma3 power-domains resources indentation + - arm64: dts: imx8qm: Correct edma3 power-domains and interrupt numbers + - libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim API + - wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete + - wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before + WMI_PEER_ASSOC_CMDID + - wifi: ath12k: fix fetching MCBC flag for QCN9274 + - wifi: iwlwifi: mvm: report beacon protection failures + - wifi: iwlwifi: dbg-tlv: ensure NUL termination + - wifi: iwlwifi: acpi: fix WPFC reading + - wifi: iwlwifi: mvm: initialize rates in FW earlier + - wifi: iwlwifi: fix EWRD table validity check + - wifi: iwlwifi: mvm: d3: fix IPN byte order + - wifi: iwlwifi: always have 'uats_enabled' + - wifi: iwlwifi: mvm: fix the TLC command after ADD_STA + - wifi: iwlwifi: read BIOS PNVM only for non-Intel SKU + - gpio: vf610: allow disabling the vf610 driver + - selftests/bpf: trace_helpers.c: do not use poisoned type + - bpf: make sure scalar args don't accept __arg_nonnull tag + - bpf: don't emit warnings intended for global subprogs for static subprogs + - arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS + - pwm: atmel-hlcdc: Fix clock imbalance related to suspend support + - net: blackhole_dev: fix build warning for ethh set but not used + - spi: consolidate setting message->spi + - spi: move split xfers for CS_WORD emulation + - arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node + - arm64: dts: ti: k3-j721s2: Fix power domain for VTM node + - arm64: dts: ti: k3-j784s4: Fix power domain for VTM node + - wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use + - wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer() + - arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP + - libbpf: fix return value for PERF_EVENT __arg_ctx type fix up check + - arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes + - arm64: dts: qcom: x1e80100-qcp: Fix supplies for LDOs 3E and 2J + - libbpf: Use OPTS_SET() macro in bpf_xdp_query() + - wifi: wfx: fix memory leak when starting AP + - arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY + - arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY + - arm64: dts: qcom: sm8650: Fix UFS PHY clocks + - wifi: ath12k: fix incorrect logic of calculating vdev_stats_id + - printk: nbcon: Relocate 32bit seq macros + - printk: ringbuffer: Do not skip non-finalized records with prb_next_seq() + - printk: Wait for all reserved records with pr_flush() + - printk: Add this_cpu_in_panic() + - printk: ringbuffer: Cleanup reader terminology + - printk: ringbuffer: Skip non-finalized records in panic + - printk: Disable passing console lock owner completely during panic() + - pwm: sti: Fix capture for st,pwm-num-chan < st,capture-num-chan + - tools/resolve_btfids: Refactor set sorting with types from btf_ids.h + - tools/resolve_btfids: Fix cross-compilation to non-host endianness + - wifi: iwlwifi: support EHT for WH + - wifi: iwlwifi: properly check if link is active + - wifi: iwlwifi: mvm: fix erroneous queue index mask + - wifi: iwlwifi: mvm: don't set the MFP flag for the GTK + - wifi: iwlwifi: mvm: don't set replay counters to 0xff + - s390/pai: fix attr_event_free upper limit for pai device drivers + - s390/vdso: drop '-fPIC' from LDFLAGS + - arm64: dts: qcom: qcm6490-idp: Correct the voltage setting for vph_pwr + - arm64: dts: qcom: qcs6490-rb3gen2: Correct the voltage setting for vph_pwr + - selftests: forwarding: Add missing config entries + - selftests: forwarding: Add missing multicast routing config entries + - arm64: dts: qcom: sm6115: drop pipe clock selection + - ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down() + - arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs + - arm64: dts: mediatek: mt7986: fix reference to PWM in fan node + - arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock name + - arm64: dts: mediatek: mt7986: fix SPI bus width properties + - arm64: dts: mediatek: mt7986: fix SPI nodename + - arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM + - arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg + - arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection node + - arm64: dts: mediatek: mt8192: fix vencoder clock name + - arm64: dts: mediatek: mt8186: fix VENC power domain clocks + - arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes + - can: m_can: Start/Cancel polling timer together with interrupts + - wifi: iwlwifi: mvm: Fix the listener MAC filter flags + - bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly + - arm64: dts: qcom: sdm845: Use the Low Power Island CX/MX for SLPI + - soc: qcom: llcc: Check return value on Broadcast_OR reg read + - ARM: dts: qcom: msm8974: correct qfprom node size + - arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains + - arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers + - arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay + - cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency + - wifi: wilc1000: prevent use-after-free on vif when cleaning up all + interfaces + - pwm: dwc: use pm_sleep_ptr() macro + - arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number + - arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number + - arm64: dts: ti: k3-am62-main: disable usb lpm + - ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit() + - bus: tegra-aconnect: Update dependency to ARCH_TEGRA + - iommu/amd: Mark interrupt as managed + - wifi: brcmsmac: avoid function pointer casts + - arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios + - arm64: dts: qcom: sm8150: correct PCIe wake-gpios + - powercap: dtpm_cpu: Fix error check against freq_qos_add_request() + - net: ena: Remove ena_select_queue + - arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and + mcu_uart0 + - arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from + mcu_uart0 + - arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS + in wkup_uart0 + - arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 + - arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC + - arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow + - arm64: dts: ti: Add common1 register space for AM65x SoC + - arm64: dts: ti: Add common1 register space for AM62x SoC + - firmware: arm_scmi: Fix double free in SMC transport cleanup path + - wifi: cfg80211: set correct param change count in ML element + - arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux + - arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl + - arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS + - wifi: wilc1000: revert reset line logic flip + - ARM: dts: arm: realview: Fix development chip ROM compatible value + - memory: tegra: Correct DLA client names + - wifi: mt76: mt7996: fix fw loading timeout + - wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band + - wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band + - wifi: mt76: mt7925: fix mcu query command fail + - wifi: mt76: mt7925: fix wmm queue mapping + - wifi: mt76: mt7925: fix fw download fail + - wifi: mt76: mt7925: fix WoW failed in encrypted mode + - wifi: mt76: mt7925: fix the wrong header translation config + - wifi: mt76: mt7925: add flow to avoid chip bt function fail + - wifi: mt76: mt7925: add support to set ifs time by mcu command + - wifi: mt76: mt7925: update PCIe DMA settings + - wifi: mt76: mt7996: check txs format before getting skb by pid + - wifi: mt76: mt7996: fix TWT issues + - wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps + - wifi: mt76: mt7996: fix HE beamformer phy cap for station vif + - wifi: mt76: mt7996: fix efuse reading issue + - wifi: mt76: mt7996: fix HIF_TXD_V2_1 value + - wifi: mt76: mt792x: fix ethtool warning + - wifi: mt76: mt7921e: fix use-after-free in free_irq() + - wifi: mt76: mt7925e: fix use-after-free in free_irq() + - wifi: mt76: mt7921: fix incorrect type conversion for CLC command + - wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel + config from ACPI + - wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177 + - arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes + - arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node + - arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs + - arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes + - arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes + - net: mctp: copy skb ext data when fragmenting + - pstore: inode: Only d_invalidate() is needed + - arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF + - ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address + - ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node + - arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM + SBC + - arm64: dts: imx8mp-evk: Fix hdmi@3d node + - regulator: userspace-consumer: add module device table + - gpiolib: Pass consumer device through to core in + devm_fwnode_gpiod_get_index() + - arm64: dts: marvell: reorder crypto interrupts on Armada SoCs + - ACPI: resource: Do IRQ override on Lunnen Ground laptops + - ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override + - ACPI: scan: Fix device check notification handling + - arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu + - arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller + - arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s + - objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks + - x86, relocs: Ignore relocations in .notes section + - SUNRPC: fix a memleak in gss_import_v2_context + - SUNRPC: fix some memleaks in gssx_dec_option_array + - arm64: dts: qcom: sm8550: Fix SPMI channels size + - arm64: dts: qcom: sm8650: Fix SPMI channels size + - mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove + function + - ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors + - btrfs: fix race when detecting delalloc ranges during fiemap + - wifi: rtw88: 8821cu: Fix firmware upload fail + - wifi: rtw88: 8821c: Fix beacon loss and disconnect + - wifi: rtw88: 8821c: Fix false alarm count + - wifi: brcm80211: handle pmk_op allocation failure + - riscv: dts: starfive: jh7100: fix root clock names + - PCI: Make pci_dev_is_disconnected() helper public for other drivers + - iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected + - iommu/vt-d: Use rbtree to track iommu probed devices + - iommu/vt-d: Improve ITE fault handling if target device isn't present + - iommu/vt-d: Use device rbtree in iopf reporting path + - iommu: Add static iommu_ops->release_domain + - iommu/vt-d: Fix NULL domain on device release + - igc: Fix missing time sync events + - igb: Fix missing time sync events + - ice: fix stats being updated by way too large values + - Bluetooth: Remove HCI_POWER_OFF_TIMEOUT + - Bluetooth: mgmt: Remove leftover queuing of power_off work + - Bluetooth: Remove superfluous call to hci_conn_check_pending() + - Bluetooth: Remove BT_HS + - Bluetooth: hci_event: Fix not indicating new connection for BIG Sync + - Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional() + - Bluetooth: hci_core: Cancel request on command timeout + - Bluetooth: hci_sync: Fix overwriting request callback + - Bluetooth: hci_h5: Add ability to allocate memory for private data + - Bluetooth: btrtl: fix out of bounds memory access + - Bluetooth: hci_core: Fix possible buffer overflow + - Bluetooth: msft: Fix memory leak + - Bluetooth: btusb: Fix memory leak + - Bluetooth: af_bluetooth: Fix deadlock + - Bluetooth: fix use-after-free in accessing skb after sending it + - sr9800: Add check for usbnet_get_endpoints + - s390/cache: prevent rebuild of shared_cpu_list + - bpf: Fix DEVMAP_HASH overflow check on 32-bit arches + - bpf: Fix hashtab overflow check on 32-bit arches + - bpf: Fix stackmap overflow check on 32-bit arches + - net: dsa: microchip: make sure drive strength configuration is not lost by + soft reset + - dpll: spec: use proper enum for pin capabilities attribute + - iommu: Fix compilation without CONFIG_IOMMU_INTEL + - ipv6: fib6_rules: flush route cache when rule is changed + - net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() + - octeontx2-af: Fix devlink params + - net: phy: fix phy_get_internal_delay accessing an empty array + - dpll: fix dpll_xa_ref_*_del() for multiple registrations + - net: hns3: fix wrong judgment condition issue + - net: hns3: fix kernel crash when 1588 is received on HIP08 devices + - net: hns3: fix port duplex configure error in IMP reset + - Bluetooth: Fix eir name length + - net: phy: dp83822: Fix RGMII TX delay configuration + - erofs: fix lockdep false positives on initializing erofs_pseudo_mnt + - OPP: debugfs: Fix warning around icc_get_name() + - tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function + - ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() + function + - l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() + function + - udp: fix incorrect parameter validation in the udp_lib_getsockopt() function + - net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function + - net/x25: fix incorrect parameter validation in the x25_getsockopt() function + - devlink: Fix length of eswitch inline-mode + - r8152: fix unknown device for choose_configuration + - nfp: flower: handle acti_netdevs allocation failure + - bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes() + - dm raid: fix false positive for requeue needed during reshape + - dm: call the resume method on internal suspend + - fbdev/simplefb: change loglevel when the power domains cannot be parsed + - drm/tegra: dsi: Add missing check for of_find_device_by_node + - drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe + - drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe() + - drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path + of tegra_dsi_probe() + - drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe() + - drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe() + - drm/tegra: rgb: Fix missing clk_put() in the error handling paths of + tegra_dc_rgb_probe() + - drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths + of tegra_output_probe() + - drm/rockchip: inno_hdmi: Fix video timing + - drm: Don't treat 0 as -1 in drm_fixp2int_ceil + - drm/vkms: Avoid reading beyond LUT array + - drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node + - drm/rockchip: lvds: do not overwrite error code + - drm/rockchip: lvds: do not print scary message when probing defer + - drm/panel-edp: use put_sync in unprepare + - drm/lima: fix a memleak in lima_heap_alloc + - ASoC: amd: acp: Add missing error handling in sof-mach + - ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe() + - ASoC: SOF: core: Skip firmware test for custom loaders + - ASoC: SOF: amd: Compute file paths on firmware load + - soundwire: stream: add missing const to Documentation + - dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA + - media: tc358743: register v4l2 async device only after successful setup + - media: cadence: csi2rx: use match fwnode for media link + - PCI/DPC: Print all TLP Prefixes, not just the first + - perf record: Fix possible incorrect free in record__switch_output() + - perf record: Check conflict between '--timestamp-filename' option and pipe + mode before recording + - HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd + - drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' + - perf pmu: Treat the msr pmu as software + - crypto: qat - avoid memcpy() overflow warning + - ALSA: hda: cs35l41: Set Channel Index correctly when system is missing _DSD + - drm/amd/display: Fix potential NULL pointer dereferences in + 'dcn10_set_output_transfer_func()' + - ASoC: sh: rz-ssi: Fix error message print + - drm/vmwgfx: Fix vmw_du_get_cursor_mob fencing of newly-created MOBs + - clk: renesas: r8a779g0: Fix PCIe clock name + - pinctrl: renesas: rzg2l: Fix locking in rzg2l_dt_subnode_to_map() + - pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function + - clk: samsung: exynos850: Propagate SPI IPCLK rate change + - media: v4l2: cci: print leading 0 on error + - perf evsel: Fix duplicate initialization of data->id in + evsel__parse_sample() + - perf bpf: Clean up the generated/copied vmlinux.h + - clk: meson: Add missing clocks to axg_clk_regmaps + - media: em28xx: annotate unchecked call to media_device_register() + - media: v4l2-tpg: fix some memleaks in tpg_alloc + - media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity + - media: dt-bindings: techwell,tw9900: Fix port schema ref + - mtd: spinand: esmt: Extend IDs to 5 bytes + - media: edia: dvbdev: fix a use-after-free + - pinctrl: mediatek: Drop bogus slew rate register range for MT8186 + - pinctrl: mediatek: Drop bogus slew rate register range for MT8192 + - drm/amdgpu: Fix potential out-of-bounds access in + 'amdgpu_discovery_reg_base_init()' + - clk: qcom: reset: Commonize the de/assert functions + - clk: qcom: reset: Ensure write completion on reset de/assertion + - quota: Fix potential NULL pointer dereference + - quota: Fix rcu annotations of inode dquot pointers + - quota: Properly annotate i_dquot arrays with __rcu + - ASoC: Intel: ssp-common: Add stub for sof_ssp_get_codec_name + - PCI/P2PDMA: Fix a sleeping issue in a RCU read section + - PCI: switchtec: Fix an error handling path in switchtec_pci_probe() + - crypto: xilinx - call finalize with bh disabled + - drivers/ps3: select VIDEO to provide cmdline functions + - perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str() + - perf srcline: Add missed addr2line closes + - dt-bindings: msm: qcom, mdss: Include ommited fam-b compatible + - drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN + - drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled + - drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode() + - drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() + - clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks + - clk: renesas: r8a779f0: Correct PFC/GPIO parent clock + - clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 + mux + - ALSA: seq: fix function cast warnings + - perf expr: Fix "has_event" function for metric style events + - perf stat: Avoid metric-only segv + - perf metric: Don't remove scale from counts + - ASoC: meson: aiu: fix function pointer type mismatch + - ASoC: meson: t9015: fix function pointer type mismatch + - powerpc: Force inlining of arch_vmap_p{u/m}d_supported() + - ASoC: SOF: Add some bounds checking to firmware data + - drm: ci: use clk_ignore_unused for apq8016 + - NTB: fix possible name leak in ntb_register_device() + - media: cedrus: h265: Fix configuring bitstream size + - media: sun8i-di: Fix coefficient writes + - media: sun8i-di: Fix power on/off sequences + - media: sun8i-di: Fix chroma difference threshold + - staging: media: starfive: Set 16 bpp for capture_raw device + - media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak + - media: go7007: add check of return value of go7007_read_addr() + - media: pvrusb2: remove redundant NULL check + - media: videobuf2: Add missing doc comment for waiting_in_dqbuf + - media: pvrusb2: fix pvr2_stream_callback casts + - clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times + - drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()' + - drm/panel: boe-tv101wum-nl6: make use of prepare_prev_first + - drm/msm/dpu: finalise global state object + - drm/mediatek: dsi: Fix DSI RGB666 formats and definitions + - PCI: Mark 3ware-9650SE Root Port Extended Tags as broken + - drm/bridge: adv7511: fix crash on irq during probe + - pinctrl: renesas: Allow the compiler to optimize away sh_pfc_pm + - clk: hisilicon: hi3519: Release the correct number of gates in + hi3519_clk_unregister() + - clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() + - clk: mediatek: mt8135: Fix an error handling path in + clk_mt8135_apmixed_probe() + - clk: mediatek: mt7622-apmixedsys: Fix an error handling path in + clk_mt8135_apmixed_probe() + - clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF + - clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical + - drm/tegra: put drm_gem_object ref on error in tegra_fb_create + - tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning + - media: ivsc: csi: Swap SINK and SOURCE pads + - media: i2c: imx290: Fix IMX920 typo + - mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref + - mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a + ref + - perf print-events: make is_event_supported() more robust + - crypto: arm/sha - fix function cast warnings + - crypto: ccp - Avoid discarding errors in psp_send_platform_access_msg() + - crypto: qat - remove unused macros in qat_comp_alg.c + - crypto: qat - removed unused macro in adf_cnv_dbgfs.c + - crypto: qat - avoid division by zero + - crypto: qat - remove double initialization of value + - crypto: qat - fix ring to service map for dcc in 4xxx + - crypto: qat - fix ring to service map for dcc in 420xx + - crypto: jitter - fix CRYPTO_JITTERENTROPY help text + - drm/tidss: Fix initial plane zpos values + - drm/tidss: Fix sync-lost issue with two displays + - clk: imx: imx8mp: Fix SAI_MCLK_SEL definition + - mtd: maps: physmap-core: fix flash size larger than 32-bit + - mtd: rawnand: lpc32xx_mlc: fix irq handler prototype + - mtd: rawnand: brcmnand: exec_op helper functions return type fixes + - ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs + - ASoC: meson: axg-tdm-interface: add frame rate constraint + - drm/msm/a6xx: specify UBWC config for sc7180 + - drm/msm/a7xx: Fix LLC typo + - dt-bindings: arm-smmu: fix SM8[45]50 GPU SMMU if condition + - perf pmu: Fix a potential memory leak in perf_pmu__lookup() + - HID: amd_sfh: Update HPD sensor structure elements + - HID: amd_sfh: Avoid disabling the interrupt + - drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int() + - media: pvrusb2: fix uaf in pvr2_context_set_notify + - media: dvb-frontends: avoid stack overflow warnings with clang + - media: go7007: fix a memleak in go7007_load_encoder + - media: ttpci: fix two memleaks in budget_av_attach + - media: mediatek: vcodec: avoid -Wcast-function-type-strict warning + - arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang + - drm/tests: helpers: Include missing drm_drv header + - drm/amd/pm: Fix esm reg mask use to get pcie speed + - gpio: nomadik: fix offset bug in nmk_pmx_set() + - drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip + - mfd: cs42l43: Fix wrong register defaults + - powerpc/32: fix ADB_CUDA kconfig warning + - powerpc/pseries: Fix potential memleak in papr_get_attr() + - powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks + - clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' + - clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' + - clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset + - perf vendor events amd: Fix Zen 4 cache latency events + - drm/msm/dpu: allow certain formats for CDM for DP + - drm/msm/dpu: add division of drm_display_mode's hskew parameter + - media: usbtv: Remove useless locks in usbtv_video_free() + - drm/xe: Fix ref counting leak on page fault + - drm/xe: Replace 'grouped target' in Makefile with pattern rule + - lib/stackdepot: fix first entry having a 0-handle + - lib/stackdepot: off by one in depot_fetch_stack() + - modules: wait do_free_init correctly + - mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults + - power: supply: mm8013: fix "not charging" detection + - powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. + - powerpc/4xx: Fix warp_gpio_leds build failure + - RISC-V: KVM: Forward SEED CSR access to user space + - leds: aw2013: Unlock mutex before destroying it + - leds: sgm3140: Add missing timer cleanup and flash gpio control + - backlight: hx8357: Fix potential NULL pointer dereference + - backlight: ktz8866: Correct the check for of_property_read_u32 + - backlight: lm3630a: Initialize backlight_properties on init + - backlight: lm3630a: Don't set bl->props.brightness in get_brightness + - backlight: da9052: Fully initialize backlight_properties during probe + - backlight: lm3639: Fully initialize backlight_properties during probe + - backlight: lp8788: Fully initialize backlight_properties during probe + - sparc32: Use generic cmpdi2/ucmpdi2 variants + - mtd: maps: sun_uflash: Declare uflash_devinit static + - sparc32: Do not select GENERIC_ISA_DMA + - sparc32: Fix section mismatch in leon_pci_grpci + - clk: Fix clk_core_get NULL dereference + - clk: zynq: Prevent null pointer dereference caused by kmalloc failure + - PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling + - cifs: Fix writeback data corruption + - ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops + - ALSA: hda/tas2781: use dev_dbg in system_resume + - ALSA: hda/tas2781: add lock to system_suspend + - ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend + - ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend + - ALSA: hda/tas2781: restore power state after system_resume + - ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection + - ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values + - ALSA: scarlett2: Fix Scarlett 4th Gen input gain range + - ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again + - mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function + - platform/x86/intel/pmc/lnl: Remove SSRAM support + - platform/x86/intel/pmc/arl: Put GNA device in D3 + - platform/x86/amd/pmf: Do not use readl() for policy buffer access + - ALSA: usb-audio: Stop parsing channels bits when all channels are found. + - phy: qcom: qmp-usb: split USB-C PHY driver + - phy: qcom: qmp-usbc: add support for the Type-C handling + - phy: qcom: qmp-usbc: handle CLAMP register in a correct way + - scsi: hisi_sas: Fix a deadlock issue related to automatic dump + - RDMA/irdma: Remove duplicate assignment + - RDMA/srpt: Do not register event handler until srpt device is fully setup + - f2fs: compress: fix to guarantee persisting compressed blocks by CP + - f2fs: compress: fix to cover normal cluster write with cp_rwsem + - f2fs: compress: fix to check unreleased compressed cluster + - f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode + - f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic + - f2fs: zone: fix to wait completion of last bio in zone correctly + - f2fs: fix NULL pointer dereference in f2fs_submit_page_write() + - f2fs: compress: fix to cover f2fs_disable_compressed_file() w/ i_sem + - f2fs: fix to avoid potential panic during recovery + - scsi: csiostor: Avoid function pointer casts + - i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling + - RDMA/hns: Fix mis-modifying default congestion control algorithm + - RDMA/device: Fix a race between mad_client and cm_client init + - RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store() + - scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn + - f2fs: fix to create selinux label during whiteout initialization + - f2fs: compress: fix to check zstd compress level correctly in mount option + - net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr() + - NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102 + - NFSv4.2: fix listxattr maximum XDR buffer size + - f2fs: compress: fix to check compress flag w/ .i_sem lock + - f2fs: check number of blocks in a current section + - watchdog: starfive: Check pm_runtime_enabled() before decrementing usage + counter + - watchdog: stm32_iwdg: initialize default timeout + - f2fs: fix to use correct segment type in f2fs_allocate_data_block() + - f2fs: ro: compress: fix to avoid caching unaligned extent + - RDMA/mana_ib: Fix bug in creation of dma regions + - RDMA/mana_ib: Introduce mdev_to_gc helper function + - RDMA/mana_ib: Introduce mana_ib_get_netdev helper function + - RDMA/mana_ib: Introduce mana_ib_install_cq_cb helper function + - RDMA/mana_ib: Use virtual address in dma regions for MRs + - Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 + - NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt + - NFS: Fix an off by one in root_nfs_cat() + - NFSv4.1/pnfs: fix NFS with TLS in pnfs + - ACPI: HMAT: Remove register of memory node for generic target + - f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks + - f2fs: compress: fix reserve_cblocks counting error when out of space + - f2fs: fix to truncate meta inode pages forcely + - f2fs: zone: fix to remove pow2 check condition for zoned block device + - cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location + - perf/x86/amd/core: Avoid register reset when CPU is dead + - afs: Revert "afs: Hide silly-rename files from userspace" + - afs: Don't cache preferred address + - afs: Fix occasional rmdir-then-VNOVNODE with generic/011 + - f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault + - nfs: fix panic when nfs4_ff_layout_prepare_ds() fails + - ovl: relax WARN_ON in ovl_verify_area() + - io_uring/net: correct the type of variable + - remoteproc: stm32: Fix incorrect type in assignment for va + - remoteproc: stm32: Fix incorrect type assignment returned by + stm32_rproc_get_loaded_rsc_tablef + - iio: pressure: mprls0025pa fix off-by-one enum + - usb: phy: generic: Get the vbus supply + - tty: vt: fix 20 vs 0x20 typo in EScsiignore + - serial: max310x: fix syntax error in IRQ error message + - tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT + - arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells + - coresight: Fix issue where a source device's helpers aren't disabled + - coresight: etm4x: Set skip_power_up in etm4_init_arch_data function + - xhci: Add interrupt pending autoclear flag to each interrupter + - xhci: make isoc_bei_interval variable interrupter specific. + - xhci: remove unnecessary event_ring_deq parameter from xhci_handle_event() + - xhci: update event ring dequeue pointer position to controller correctly + - coccinelle: device_attr_show: Remove useless expression STR + - kconfig: fix infinite loop when expanding a macro at the end of file + - iio: gts-helper: Fix division loop + - bus: mhi: ep: check the correct variable in mhi_ep_register_controller() + - hwtracing: hisi_ptt: Move type check to the beginning of + hisi_ptt_pmu_event_init() + - rtc: mt6397: select IRQ_DOMAIN instead of depending on it + - rtc: max31335: fix interrupt status reg + - serial: 8250_exar: Don't remove GPIO device on suspend + - staging: greybus: fix get_channel_from_mode() failure path + - mei: vsc: Call wake_up() in the threaded IRQ handler + - mei: vsc: Don't use sleeping condition in wait_event_timeout() + - usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin + - char: xilinx_hwicap: Fix NULL vs IS_ERR() bug + - x86/hyperv: Use per cpu initial stack for vtl context + - ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin + - thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error + handling path + - thermal/drivers/qoriq: Fix getting tmu range + - io_uring: don't save/restore iowait state + - spi: lpspi: Avoid potential use-after-free in probe() + - spi: Restore delays for non-GPIO chip select + - ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates + - nouveau: reset the bo resource bus info after an eviction + - tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge() + - rds: tcp: Fix use-after-free of net in reqsk_timer_handler(). + - octeontx2-af: Use matching wake_up API variant in CGX command interface + - s390/vtime: fix average steal time calculation + - net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check + - devlink: Fix devlink parallel commands processing + - riscv: Only check online cpus for emulated accesses + - soc: fsl: dpio: fix kcalloc() argument order + - cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw() + - io_uring: Fix release of pinned pages when __io_uaddr_map fails + - tcp: Fix refcnt handling in __inet_hash_connect(). + - vmxnet3: Fix missing reserved tailroom + - hsr: Fix uninit-value access in hsr_get_node() + - net: txgbe: fix clk_name exceed MAX_DEV_ID limits + - spi: spi-mem: add statistics support to ->exec_op() calls + - spi: Fix error code checking in spi_mem_exec_op() + - nvme: fix reconnection fail due to reserved tag allocation + - drm/xe: Invalidate userptr VMA on page pin fault + - drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC + - net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up + - net: ethernet: mtk_eth_soc: fix PPE hanging issue + - io_uring: fix poll_remove stalled req completion + - ASoC: SOF: amd: Move signed_fw_image to struct acp_quirk_entry + - ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED + - riscv: Fix compilation error with FAST_GUP and rv32 + - xen/evtchn: avoid WARN() when unbinding an event channel + - xen/events: increment refcnt only if event channel is refcounted + - packet: annotate data-races around ignore_outgoing + - xfrm: Allow UDP encapsulation only in offload modes + - net: veth: do not manipulate GRO when using XDP + - net: dsa: mt7530: prevent possible incorrect XTAL frequency selection + - spi: spi-imx: fix off-by-one in mx51 CPU mode burst length + - drm: Fix drm_fixp2int_round() making it add 0.5 + - virtio: uapi: Drop __packed attribute in linux/virtio_pci.h + - vdpa_sim: reset must not run + - vdpa/mlx5: Allow CVQ size changes + - virtio: packed: fix unmap leak for indirect desc table + - net: move dev->state into net_device_read_txrx group + - wireguard: receive: annotate data-race around receiving_counter.counter + - rds: introduce acquire/release ordering in acquire/release_in_xmit() + - hsr: Handle failures in module init + - ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels + - nouveau/gsp: don't check devinit disable on GSP. + - ceph: stop copying to iter at EOF on sync reads + - net: phy: fix phy_read_poll_timeout argument type in genphy_loopback + - dm-integrity: fix a memory leak when rechecking the data + - net/bnx2x: Prevent access to a freed page in page_pool + - devlink: fix port new reply cmd type + - octeontx2: Detect the mbox up or down message via register + - octeontx2-pf: Wait till detach_resources msg is complete + - octeontx2-pf: Use default max_active works instead of one + - octeontx2-pf: Send UP messages to VF only when VF is up. + - octeontx2-af: Use separate handlers for interrupts + - drm/amdgpu: add MMHUB 3.3.1 support + - drm/amdgpu: fix mmhub client id out-of-bounds access + - drm/amdgpu: drop setting buffer funcs in sdma442 + - netfilter: nft_set_pipapo: release elements in clone only from destroy path + - netfilter: nf_tables: do not compare internal table flags on updates + - rcu: add a helper to report consolidated flavor QS + - net: report RCU QS on threaded NAPI repolling + - bpf: report RCU QS in cpumap kthread + - net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports + - net: dsa: mt7530: fix handling of all link-local frames + - netfilter: nf_tables: Fix a memory leak in nf_tables_updchain + - spi: spi-mt65xx: Fix NULL pointer access in interrupt handler + - selftests: forwarding: Fix ping failure due to short timeout + - dm io: Support IO priority + - dm-integrity: align the outgoing bio in integrity_recheck + - x86/efistub: Clear decompressor BSS in native EFI entrypoint + - x86/efistub: Don't clear BSS twice in mixed mode + - printk: Adjust mapping for 32bit seq macros + - printk: Use prb_first_seq() as base for 32bit seq macros + - Linux 6.8.2 + - [Config] updateconfig following v6.8.2 import + + * Provide python perf module (LP: #2051560) + - [Packaging] enable perf python module + - [Packaging] provide a wrapper module for python-perf + + * To support AMD Adaptive Backlight Management (ABM) for power profiles daemon + >= 2.0 (LP: #2056716) + - drm/amd/display: add panel_power_savings sysfs entry to eDP connectors + - drm/amdgpu: respect the abmlevel module parameter value if it is set + + * Miscellaneous Ubuntu changes + - [Config] Disable StarFive JH7100 support + - [Config] Disable Renesas RZ/Five support + - [Config] Disable BINFMT_FLAT for riscv64 + + -- Roxana Nicolescu Wed, 01 May 2024 16:02:05 +0200 + +linux (6.8.0-31.31) noble; urgency=medium + + * noble/linux: 6.8.0-31.31 -proposed tracker (LP: #2062933) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.04.04) + + -- Andrea Righi Fri, 19 Apr 2024 23:46:38 +0200 + +linux (6.8.0-30.30) noble; urgency=medium + + * noble/linux: 6.8.0-30.30 -proposed tracker (LP: #2061893) + + * System unstable, kernel ring buffer flooded with "BUG: Bad page state in + process swapper/0" (LP: #2056706) + - xen-netfront: Add missing skb_mark_for_recycle + + -- Andrea Righi Tue, 16 Apr 2024 21:17:11 +0200 + +linux (6.8.0-29.29) noble; urgency=medium + + * noble/linux: 6.8.0-29.29 -proposed tracker (LP: #2061888) + + * [24.04 FEAT] [SEC2353] zcrypt: extend error recovery to deal with device + scans (LP: #2050019) + - s390/zcrypt: harmonize debug feature calls and defines + - s390/zcrypt: introduce dynamic debugging for AP and zcrypt code + - s390/pkey: harmonize pkey s390 debug feature calls + - s390/pkey: introduce dynamic debugging for pkey + - s390/ap: add debug possibility for AP messages + - s390/zcrypt: add debug possibility for CCA and EP11 messages + - s390/ap: rearm APQNs bindings complete completion + - s390/ap: clarify AP scan bus related functions and variables + - s390/ap: rework ap_scan_bus() to return true on config change + - s390/ap: introduce mutex to lock the AP bus scan + - s390/zcrypt: introduce retries on in-kernel send CPRB functions + - s390/zcrypt: improve zcrypt retry behavior + - s390/pkey: improve pkey retry behavior + + * [24.04 FEAT] Memory hotplug vmem pages (s390x) (LP: #2051835) + - mm/memory_hotplug: introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers + - s390/mm: allocate vmemmap pages from self-contained memory range + - s390/sclp: remove unhandled memory notifier type + - s390/mm: implement MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers + - s390: enable MHP_MEMMAP_ON_MEMORY + - [Config] enable CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE and + CONFIG_MHP_MEMMAP_ON_MEMORY for s390x + + -- Paolo Pisati Tue, 16 Apr 2024 20:32:09 +0200 + +linux (6.8.0-28.28) noble; urgency=medium + + * noble/linux: 6.8.0-28.28 -proposed tracker (LP: #2061867) + + * linux-gcp 6.8.0-1005.5 (+ others) Noble kernel regression iwth new apparmor + profiles/features (LP: #2061851) + - SAUCE: apparmor4.0.0 [92/90]: fix address mapping for recvfrom + + -- Paolo Pisati Tue, 16 Apr 2024 18:29:17 +0200 + +linux (6.8.0-25.25) noble; urgency=medium + + * noble/linux: 6.8.0-25.25 -proposed tracker (LP: #2061083) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.04.04) + + * Apply mitigations for the native BHI hardware vulnerabilty (LP: #2060909) + - x86/cpufeatures: Add new word for scattered features + - x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file + - x86/syscall: Don't force use of indirect calls for system calls + - x86/bhi: Add support for clearing branch history at syscall entry + - x86/bhi: Define SPEC_CTRL_BHI_DIS_S + - x86/bhi: Enumerate Branch History Injection (BHI) bug + - x86/bhi: Add BHI mitigation knob + - x86/bhi: Mitigate KVM by default + - KVM: x86: Add BHI_NO + - x86: set SPECTRE_BHI_ON as default + - [Config] enable spectre_bhi=auto by default + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/90]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/90]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/90]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/90]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/90]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/90]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/90]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/90]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/90]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/90]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/90]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/90]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/90]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/90]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/90]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/90]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/90]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/90]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/90]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/90]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/90]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/90]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/90]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/90]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/90]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/90]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/90]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/90]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/90]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [31/90]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/90]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/90]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/90]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/90]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/90]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/90]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/90]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/90]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/90]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/90]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/90]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [43/90]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/90]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/90]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/90]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/90]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/90]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/90]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/90]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/90]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/90]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/90]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/90]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/90]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/90]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/90]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/90]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/90]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/90]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/90]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/90]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/90]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/90]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/90] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/90]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/90]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/90]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/90]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/90]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/90]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/90]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/90]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/90]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/90]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/90]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/90]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/90]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/90]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/90]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/90]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/90]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/90]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/90]: fixup notify + - SAUCE: apparmor4.0.0 [88/90]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [89/90]:apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [90/90]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0: fix reserved mem for when we save ipv6 addresses + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/90]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/90]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/90]: userns - make it so special unconfined + profiles can mediate user namespaces + + * [MTL] x86: Fix Cache info sysfs is not populated (LP: #2049793) + - SAUCE: cacheinfo: Check for null last-level cache info + - SAUCE: cacheinfo: Allocate memory for memory if not done from the primary + CPU + - SAUCE: x86/cacheinfo: Delete global num_cache_leaves + - SAUCE: x86/cacheinfo: Clean out init_cache_level() + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0: LSM stacking v39: fix build error with + CONFIG_SECURITY=n + - [Config] toolchain version update + + -- Paolo Pisati Fri, 12 Apr 2024 10:42:33 +0200 + +linux (6.8.0-22.22) noble; urgency=medium + + * noble/linux: 6.8.0-22.22 -proposed tracker (LP: #2060238) + + -- Andrea Righi Thu, 04 Apr 2024 23:00:49 +0200 + +linux (6.8.0-21.21) noble; urgency=medium + + * noble/linux: 6.8.0-21.21 -proposed tracker (LP: #2060225) + + * Miscellaneous Ubuntu changes + - [Config] update toolchain version in annotations + + -- Andrea Righi Thu, 04 Apr 2024 22:20:27 +0200 + +linux (6.8.0-20.20) noble; urgency=medium + + * noble/linux: 6.8.0-20.20 -proposed tracker (LP: #2058221) + + * Noble update: v6.8.1 upstream stable release (LP: #2058224) + - x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set + - Documentation/hw-vuln: Add documentation for RFDS + - x86/rfds: Mitigate Register File Data Sampling (RFDS) + - KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests + - Linux 6.8.1 + + * Autopkgtest failures on amd64 (LP: #2048768) + - [Packaging] update to clang-18 + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0: LSM stacking v39: fix build error with + CONFIG_SECURITY=n + - [Config] amd64: MITIGATION_RFDS=y + + -- Paolo Pisati Mon, 18 Mar 2024 11:08:14 +0100 + +linux (6.8.0-19.19) noble; urgency=medium + + * noble/linux: 6.8.0-19.19 -proposed tracker (LP: #2057910) + + * Miscellaneous Ubuntu changes + - [Packaging] re-introduce linux-doc as an empty package + + -- Paolo Pisati Thu, 14 Mar 2024 14:36:14 +0100 + +linux (6.8.0-18.18) noble; urgency=medium + + * noble/linux: 6.8.0-18.18 -proposed tracker (LP: #2057456) + + * Miscellaneous Ubuntu changes + - [Packaging] drop dependency on libclang-17 + + -- Paolo Pisati Tue, 12 Mar 2024 14:44:13 +0100 + +linux (6.8.0-17.17) noble; urgency=medium + + * noble/linux: 6.8.0-17.17 -proposed tracker (LP: #2056745) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Add debian/control sanity check" + + -- Paolo Pisati Mon, 11 Mar 2024 12:46:38 +0100 + +linux (6.8.0-16.16) noble; urgency=medium + + * noble/linux: 6.8.0-16.16 -proposed tracker (LP: #2056738) + + * left-over ceph debugging printks (LP: #2056616) + - Revert "UBUNTU: SAUCE: ceph: make sure all the files successfully put before + unmounting" + + * qat: Improve error recovery flows (LP: #2056354) + - crypto: qat - add heartbeat error simulator + - crypto: qat - disable arbitration before reset + - crypto: qat - update PFVF protocol for recovery + - crypto: qat - re-enable sriov after pf reset + - crypto: qat - add fatal error notification + - crypto: qat - add auto reset on error + - crypto: qat - limit heartbeat notifications + - crypto: qat - improve aer error reset handling + - crypto: qat - change SLAs cleanup flow at shutdown + - crypto: qat - resolve race condition during AER recovery + - Documentation: qat: fix auto_reset section + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/87]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/87]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/87]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/87]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/87]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/87]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/87]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/87]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/87]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/87]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/87]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/87]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/87]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/87]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/87]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/87]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/87]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/87]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/87]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/87]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/87]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/87]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/87]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/87]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/87]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/87]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/87]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/87]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/87]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [31/87]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/87]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/87]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/87]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/87]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/87]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/87]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/87]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/87]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/87]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/87]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/87]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [43/87]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/87]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/87]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/87]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/87]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/87]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/87]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/87]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/87]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/87]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/87]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/87]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/87]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/87]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/87]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/87]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/87]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/87]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/87]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/87]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/87]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/87]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/87] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/87]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/87]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/87]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/87]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/87]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/87]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/87]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/87]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/87]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/87]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/87]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/87]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/87]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/87]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/87]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/87]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/87]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/87]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/87]: fixup notify + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/87]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/87]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/87]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Enable lowlatency settings in the generic kernel (LP: #2051342) + - [Config] enable low-latency settings + + * hwmon: (coretemp) Fix core count limitation (LP: #2056126) + - hwmon: (coretemp) Introduce enum for attr index + - hwmon: (coretemp) Remove unnecessary dependency of array index + - hwmon: (coretemp) Replace sensor_device_attribute with device_attribute + - hwmon: (coretemp) Remove redundant pdata->cpu_map[] + - hwmon: (coretemp) Abstract core_temp helpers + - hwmon: (coretemp) Split package temp_data and core temp_data + - hwmon: (coretemp) Remove redundant temp_data->is_pkg_data + - hwmon: (coretemp) Use dynamic allocated memory for core temp_data + + * Miscellaneous Ubuntu changes + - [Config] Disable CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION + - [Packaging] remove debian/scripts/misc/arch-has-odm-enabled.sh + - rebase on v6.8 + - [Config] toolchain version update + + * Miscellaneous upstream changes + - crypto: qat - add fatal error notify method + + * Rebase on v6.8 + + -- Paolo Pisati Mon, 11 Mar 2024 10:14:10 +0100 + +linux (6.8.0-15.15) noble; urgency=medium + + * noble/linux: 6.8.0-15.15 -proposed tracker (LP: #2055871) + + * Miscellaneous Ubuntu changes + - rebase on v6.8-rc7 + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Transition laptop-23.10 to generic" + + * Rebase on v6.8-rc7 + + -- Paolo Pisati Mon, 04 Mar 2024 11:50:51 +0100 + +linux (6.8.0-14.14) noble; urgency=medium + + * noble/linux: 6.8.0-14.14 -proposed tracker (LP: #2055551) + + * Please change CONFIG_CONSOLE_LOGLEVEL_QUIET to 3 (LP: #2049390) + - [Config] reduce verbosity when booting in quiet mode + + * linux: please move erofs.ko (CONFIG_EROFS for EROFS support) from linux- + modules-extra to linux-modules (LP: #2054809) + - UBUNTU [Packaging]: Include erofs in linux-modules instead of linux-modules- + extra + + * linux: please move dmi-sysfs.ko (CONFIG_DMI_SYSFS for SMBIOS support) from + linux-modules-extra to linux-modules (LP: #2045561) + - [Packaging] Move dmi-sysfs.ko into linux-modules + + * Enable CONFIG_INTEL_IOMMU_DEFAULT_ON and + CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON (LP: #1951440) + - [Config] enable Intel DMA remapping by default + + * disable Intel DMA remapping by default (LP: #1971699) + - [Config] update tracking bug for CONFIG_INTEL_IOMMU_DEFAULT_ON + + * Packaging resync (LP: #1786013) + - debian.master/dkms-versions -- update from kernel-versions + (main/d2024.02.29) + + * Miscellaneous Ubuntu changes + - SAUCE: modpost: Replace 0-length array with flex-array member + - [packaging] do not include debian/ directory in a binary package + - [packaging] remove debian/stamps/keep-dir + + -- Paolo Pisati Fri, 01 Mar 2024 11:45:12 +0100 + +linux (6.8.0-13.13) noble; urgency=medium + + * noble/linux: 6.8.0-13.13 -proposed tracker (LP: #2055421) + + * Packaging resync (LP: #1786013) + - debian.master/dkms-versions -- update from kernel-versions + (main/d2024.02.29) + + * Miscellaneous Ubuntu changes + - rebase on v6.8-rc6 + - [Config] updateconfifs following v6.8-rc6 rebase + + * Rebase on v6.8-rc6 + + -- Paolo Pisati Thu, 29 Feb 2024 15:02:24 +0100 + +linux (6.8.0-12.12) noble; urgency=medium + + * linux-tools-common: man page of usbip[d] is misplaced (LP: #2054094) + - [Packaging] rules: Put usbip manpages in the correct directory + + * Validate connection interval to pass Bluetooth Test Suite (LP: #2052005) + - Bluetooth: Enforce validation on max value of connection interval + + * Turning COMPAT_32BIT_TIME off on s390x (LP: #2038583) + - [Config] Turn off 31-bit COMPAT on s390x + + * Don't produce linux-source binary package (LP: #2043994) + - [Packaging] Add debian/control sanity check + + * Don't produce linux-*-source- package (LP: #2052439) + - [Packaging] Move linux-source package stub to debian/control.d + - [Packaging] Build linux-source package only for the main kernel + + * Don't produce linux-*-cloud-tools-common, linux-*-tools-common and + linux-*-tools-host binary packages (LP: #2048183) + - [Packaging] Move indep tools package stubs to debian/control.d + - [Packaging] Build indep tools packages only for the main kernel + + * Enable CONFIG_INTEL_IOMMU_DEFAULT_ON and + CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON (LP: #1951440) + - [Config] enable Intel DMA remapping by default + + * disable Intel DMA remapping by default (LP: #1971699) + - [Config] update tracking bug for CONFIG_INTEL_IOMMU_DEFAULT_ON + + * Miscellaneous Ubuntu changes + - [Packaging] Transition laptop-23.10 to generic + + -- Paolo Pisati Thu, 22 Feb 2024 14:31:00 +0100 + +linux (6.8.0-11.11) noble; urgency=medium + + * noble/linux: 6.8.0-11.11 -proposed tracker (LP: #2053094) + + * Miscellaneous Ubuntu changes + - [Packaging] riscv64: disable building unnecessary binary debs + + -- Paolo Pisati Wed, 14 Feb 2024 00:04:31 +0100 + +linux (6.8.0-10.10) noble; urgency=medium + + * noble/linux: 6.8.0-10.10 -proposed tracker (LP: #2053015) + + * Miscellaneous Ubuntu changes + - [Packaging] add Rust build-deps for riscv64 + + * Miscellaneous upstream changes + - Revert "Revert "UBUNTU: [Packaging] temporarily disable Rust dependencies on + riscv64"" + + -- Paolo Pisati Tue, 13 Feb 2024 13:23:47 +0100 + +linux (6.8.0-9.9) noble; urgency=medium + + * noble/linux: 6.8.0-9.9 -proposed tracker (LP: #2052945) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] temporarily disable Rust dependencies on + riscv64" + + -- Paolo Pisati Mon, 12 Feb 2024 15:49:20 +0100 + +linux (6.8.0-8.8) noble; urgency=medium + + * noble/linux: 6.8.0-8.8 -proposed tracker (LP: #2052918) + + * Miscellaneous Ubuntu changes + - [Packaging] riscv64: enable linux-libc-dev build + - v6.8-rc4 rebase + + * Rebase on v6.8-rc4 + + -- Paolo Pisati Mon, 12 Feb 2024 10:13:34 +0100 + +linux (6.8.0-7.7) noble; urgency=medium + + * noble/linux: 6.8.0-7.7 -proposed tracker (LP: #2052691) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/87]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/87]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/87]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/87]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/87]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/87]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/87]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/87]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/87]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/87]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/87]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/87]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/87]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/87]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/87]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/87]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/87]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/87]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/87]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/87]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/87]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/87]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/87]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/87]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/87]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/87]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/87]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/87]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/87]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [31/87]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/87]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/87]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/87]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/87]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/87]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/87]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/87]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/87]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/87]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/87]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/87]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [43/87]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/87]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/87]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/87]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/87]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/87]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/87]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/87]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/87]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/87]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/87]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/87]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/87]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/87]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/87]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/87]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/87]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/87]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/87]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/87]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/87]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/87]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/87] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/87]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/87]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/87]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/87]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/87]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/87]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/87]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/87]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/87]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/87]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/87]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/87]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/87]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/87]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/87]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/87]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/87]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/87]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/87]: fixup notify + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/87]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/87]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/87]: userns - make it so special unconfined + profiles can mediate user namespaces + + -- Paolo Pisati Thu, 08 Feb 2024 12:05:44 +0100 + +linux (6.8.0-6.6) noble; urgency=medium + + * noble/linux: 6.8.0-6.6 -proposed tracker (LP: #2052592) + + * Packaging resync (LP: #1786013) + - debian.master/dkms-versions -- update from kernel-versions + (main/d2024.02.07) + - [Packaging] update variants + + * FIPS kernels should default to fips mode (LP: #2049082) + - SAUCE: Enable fips mode by default, in FIPS kernels only + + * Fix snapcraftyaml.yaml for jammy:linux-raspi (LP: #2051468) + - [Packaging] Remove old snapcraft.yaml + + * Azure: Fix regression introduced in LP: #2045069 (LP: #2052453) + - hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed + + * Miscellaneous Ubuntu changes + - [Packaging] Remove in-tree abi checks + - [Packaging] drop abi files with clean + - [Packaging] Remove do_full_source variable (fixup) + - [Packaging] Remove update-dkms-versions and move dkms-versions + - [Config] updateconfigs following v6.8-rc3 rebase + - [packaging] rename to linux + - [packaging] rebase on v6.8-rc3 + - [packaging] disable signing for ppc64el + + * Rebase on v6.8-rc3 + + -- Paolo Pisati Wed, 07 Feb 2024 15:13:52 +0100 + +linux (6.8.0-5.5) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-5.5 -proposed tracker (LP: #2052136) + + * Miscellaneous upstream changes + - Revert "mm/sparsemem: fix race in accessing memory_section->usage" + + -- Paolo Pisati Fri, 02 Feb 2024 12:59:09 +0100 + +linux-unstable (6.8.0-4.4) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-4.4 -proposed tracker (LP: #2051502) + + * Migrate from fbdev drivers to simpledrm and DRM fbdev emulation layer + (LP: #1965303) + - [Config] enable simpledrm and DRM fbdev emulation layer + + * Miscellaneous Ubuntu changes + - [Config] toolchain update + + * Miscellaneous upstream changes + - rust: upgrade to Rust 1.75.0 + + -- Paolo Pisati Mon, 29 Jan 2024 14:49:49 +0100 + +linux-unstable (6.8.0-3.3) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-3.3 -proposed tracker (LP: #2051488) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [43/87]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/87]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/87]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/87]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/87]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/87]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/87]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/87]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/87]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/87]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/87]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/87]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/87]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/87]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/87]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/87]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/87]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/87]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/87]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/87]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/87]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/87]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [69/87]: add io_uring mediation + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * apparmor restricts read access of user namespace mediation sysctls to root + (LP: #2040194) + - SAUCE: apparmor4.0.0 [73/87]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + + * AppArmor spams kernel log with assert when auditing (LP: #2040192) + - SAUCE: apparmor4.0.0 [72/87]: apparmor: fix request field from a prompt + reply that denies all access + + * apparmor notification files verification (LP: #2040250) + - SAUCE: apparmor4.0.0 [71/87]: apparmor: fix notification header size + + * apparmor oops when racing to retrieve a notification (LP: #2040245) + - SAUCE: apparmor4.0.0 [70/87]: apparmor: fix oops when racing to retrieve + notification + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/87]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/87]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/87]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0 [01/87]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/87]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/87]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/87]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/87]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/87]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/87]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/87]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/87]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/87]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/87]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/87]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/87]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/87]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/87]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/87]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/87]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/87]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/87]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/87]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/87]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/87]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/87]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/87]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/87]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/87]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/87]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/87]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/87]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [30/87]: LSM stacking v39: LSM: Single calls in + socket_getpeersec hooks + - SAUCE: apparmor4.0.0 [31/87]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/87]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/87]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/87]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/87]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/87]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/87]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/87]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/87]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/87]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/87]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/87]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [65/87] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [74/87]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/87]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/87]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/87]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/87]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/87]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/87]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/87]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/87]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/87]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/87]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/87]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/87]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/87]: fixup notify + - [Config] updateconfigs following v6.8-rc2 rebase + + -- Paolo Pisati Mon, 29 Jan 2024 08:59:32 +0100 + +linux-unstable (6.8.0-2.2) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-2.2 -proposed tracker (LP: #2051110) + + * Miscellaneous Ubuntu changes + - [Config] toolchain update + - [Config] enable Rust + + -- Paolo Pisati Wed, 24 Jan 2024 13:10:07 +0100 + +linux-unstable (6.8.0-1.1) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-1.1 -proposed tracker (LP: #2051102) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.8-rc1 + - [Config] updateconfigs following v6.8-rc1 rebase + - SAUCE: export file_close_fd() instead of close_fd_get_file() + - SAUCE: cpufreq: s/strlcpy/strscpy/ + - debian/dkms-versions -- temporarily disable zfs dkms + - debian/dkms-versions -- temporarily disable ipu6 and isvsc dkms + - debian/dkms-versions -- temporarily disable v4l2loopback + + -- Paolo Pisati Wed, 24 Jan 2024 10:48:37 +0100 + +linux-unstable (6.8.0-0.0) noble; urgency=medium + + * Empty entry. + + -- Paolo Pisati Tue, 23 Jan 2024 11:36:40 +0100 + +linux-unstable (6.7.0-7.7) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-7.7 -proposed tracker (LP: #2049357) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable signing for s390x and ppc64el + + -- Andrea Righi Mon, 15 Jan 2024 08:41:11 +0100 + +linux-unstable (6.7.0-6.6) noble; urgency=medium + + * Empty entry. + + -- Andrea Righi Mon, 15 Jan 2024 08:30:50 +0100 + +linux (6.7.0-2.2) noble; urgency=medium + + * noble/linux: 6.7.0-2.2 -proposed tracker (LP: #2049182) + + * Packaging resync (LP: #1786013) + - [Packaging] resync getabis + + * Enforce RETPOLINE and SLS mitigrations (LP: #2046440) + - SAUCE: objtool: Make objtool check actually fatal upon fatal errors + - SAUCE: objtool: make objtool SLS validation fatal when building with + CONFIG_SLS=y + - SAUCE: objtool: make objtool RETPOLINE validation fatal when building with + CONFIG_RETPOLINE=y + - SAUCE: scripts: remove generating .o-ur objects + - [Packaging] Remove all custom retpoline-extract code + - Revert "UBUNTU: SAUCE: vga_set_mode -- avoid jump tables" + - Revert "UBUNTU: SAUCE: early/late -- annotate indirect calls in early/late + initialisation code" + - Revert "UBUNTU: SAUCE: apm -- annotate indirect calls within + firmware_restrict_branch_speculation_{start,end}" + + * Miscellaneous Ubuntu changes + - [Packaging] temporarily disable riscv64 builds + - [Packaging] temporarily disable Rust dependencies on riscv64 + + -- Andrea Righi Fri, 12 Jan 2024 09:21:57 +0100 + +linux (6.7.0-1.1) noble; urgency=medium + + * noble/linux: 6.7.0-1.1 -proposed tracker (LP: #2048859) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/d2024.01.02) + + * [UBUNTU 23.04] Regression: Ubuntu 23.04/23.10 do not include uvdevice + anymore (LP: #2048919) + - [Config] Enable S390_UV_UAPI (built-in) + + * Support mipi camera on Intel Meteor Lake platform (LP: #2031412) + - SAUCE: iommu: intel-ipu: use IOMMU passthrough mode for Intel IPUs on Meteor + Lake + - SAUCE: platform/x86: int3472: Add handshake GPIO function + + * [SRU][J/L/M] UBUNTU: [Packaging] Make WWAN driver a loadable module + (LP: #2033406) + - [Packaging] Make WWAN driver loadable modules + + * usbip: error: failed to open /usr/share/hwdata//usb.ids (LP: #2039439) + - [Packaging] Make linux-tools-common depend on hwdata + + * [Mediatek] mt8195-demo: enable CONFIG_MTK_IOMMU as module for multimedia and + PCIE peripherals (LP: #2036587) + - [Config] Enable CONFIG_MTK_IOMMU on arm64 + + * linux-*: please enable dm-verity kconfigs to allow MoK/db verified root + images (LP: #2019040) + - [Config] CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y + + * kexec enable to load/kdump zstd compressed zimg (LP: #2037398) + - [Packaging] Revert arm64 image format to Image.gz + + * Mantic minimized/minimal cloud images do not receive IP address during + provisioning; systemd regression with wait-online (LP: #2036968) + - [Config] Enable virtio-net as built-in to avoid race + + * Make backlight module auto detect dell_uart_backlight (LP: #2008882) + - SAUCE: ACPI: video: Dell AIO UART backlight detection + + * Linux 6.2 fails to reboot with current u-boot-nezha (LP: #2021364) + - [Config] Default to performance CPUFreq governor on riscv64 + + * Enable Nezha board (LP: #1975592) + - [Config] Build in D1 clock drivers on riscv64 + - [Config] Enable CONFIG_SUN6I_RTC_CCU on riscv64 + - [Config] Enable CONFIG_SUNXI_WATCHDOG on riscv64 + - [Config] Disable SUN50I_DE2_BUS on riscv64 + - [Config] Disable unneeded sunxi pinctrl drivers on riscv64 + + * Enable StarFive VisionFive 2 board (LP: #2013232) + - [Config] Enable CONFIG_PINCTRL_STARFIVE_JH7110_SYS on riscv64 + - [Config] Enable CONFIG_STARFIVE_WATCHDOG on riscv64 + + * rcu_sched detected stalls on CPUs/tasks (LP: #1967130) + - [Config] Enable virtually mapped stacks on riscv64 + + * Check for changes relevant for security certifications (LP: #1945989) + - [Packaging] Add a new fips-checks script + + * Installation support for SMARC RZ/G2L platform (LP: #2030525) + - [Config] build Renesas RZ/G2L USBPHY control driver statically + + * Add support for kernels compiled with CONFIG_EFI_ZBOOT (LP: #2002226) + - [Config]: Turn on CONFIG_EFI_ZBOOT on ARM64 + + * Default module signing algo should be accelerated (LP: #2034061) + - [Config] Default module signing algo should be accelerated + + * Miscellaneous Ubuntu changes + - [Config] annotations clean-up + + [ Upstream Kernel Changes ] + + * Rebase to v6.7 + + -- Andrea Righi Thu, 11 Jan 2024 11:49:07 +0100 + +linux (6.7.0-0.0) noble; urgency=medium + + * Empty entry + + -- Andrea Righi Tue, 09 Jan 2024 09:27:23 +0100 + +linux-unstable (6.7.0-5.5) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-5.5 -proposed tracker (LP: #2048118) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/d2024.01.02) + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable Rust support + - [Packaging] temporarily disable riscv64 builds + + -- Andrea Righi Fri, 05 Jan 2024 12:33:10 +0100 + +linux-unstable (6.7.0-4.4) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-4.4 -proposed tracker (LP: #2047807) + + * unconfined profile denies userns_create for chromium based processes + (LP: #1990064) + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * apparmor restricts read access of user namespace mediation sysctls to root + (LP: #2040194) + - SAUCE: apparmor4.0.0 [69/69]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + + * AppArmor spams kernel log with assert when auditing (LP: #2040192) + - SAUCE: apparmor4.0.0 [68/69]: apparmor: fix request field from a prompt + reply that denies all access + + * apparmor notification files verification (LP: #2040250) + - SAUCE: apparmor4.0.0 [67/69]: apparmor: fix notification header size + + * apparmor oops when racing to retrieve a notification (LP: #2040245) + - SAUCE: apparmor4.0.0 [66/69]: apparmor: fix oops when racing to retrieve + notification + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/69]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [02/69]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [03/69]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [04/69]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [05/69]: af_unix mediation + - SAUCE: apparmor4.0.0 [06/69]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [07/69]: Stacking v38: LSM: Identify modules by more + than name + - SAUCE: apparmor4.0.0 [08/69]: Stacking v38: LSM: Add an LSM identifier for + external use + - SAUCE: apparmor4.0.0 [09/69]: Stacking v38: LSM: Identify the process + attributes for each module + - SAUCE: apparmor4.0.0 [10/69]: Stacking v38: LSM: Maintain a table of LSM + attribute data + - SAUCE: apparmor4.0.0 [11/69]: Stacking v38: proc: Use lsmids instead of lsm + names for attrs + - SAUCE: apparmor4.0.0 [12/69]: Stacking v38: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [13/69]: Stacking v38: LSM: Infrastructure management + of the sock security + - SAUCE: apparmor4.0.0 [14/69]: Stacking v38: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [15/69]: Stacking v38: LSM: provide lsm name and id + slot mappings + - SAUCE: apparmor4.0.0 [16/69]: Stacking v38: IMA: avoid label collisions with + stacked LSMs + - SAUCE: apparmor4.0.0 [17/69]: Stacking v38: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [18/69]: Stacking v38: LSM: Use lsmblob in + security_kernel_act_as + - SAUCE: apparmor4.0.0 [19/69]: Stacking v38: LSM: Use lsmblob in + security_secctx_to_secid + - SAUCE: apparmor4.0.0 [20/69]: Stacking v38: LSM: Use lsmblob in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [21/69]: Stacking v38: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [22/69]: Stacking v38: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [23/69]: Stacking v38: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [24/69]: Stacking v38: LSM: Use lsmblob in + security_cred_getsecid + - SAUCE: apparmor4.0.0 [25/69]: Stacking v38: LSM: Specify which LSM to + display + - SAUCE: apparmor4.0.0 [27/69]: Stacking v38: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [28/69]: Stacking v38: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [29/69]: Stacking v38: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [30/69]: Stacking v38: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [31/69]: Stacking v38: LSM: security_secid_to_secctx in + netlink netfilter + - SAUCE: apparmor4.0.0 [32/69]: Stacking v38: NET: Store LSM netlabel data in + a lsmblob + - SAUCE: apparmor4.0.0 [33/69]: Stacking v38: binder: Pass LSM identifier for + confirmation + - SAUCE: apparmor4.0.0 [34/69]: Stacking v38: LSM: security_secid_to_secctx + module selection + - SAUCE: apparmor4.0.0 [35/69]: Stacking v38: Audit: Keep multiple LSM data in + audit_names + - SAUCE: apparmor4.0.0 [36/69]: Stacking v38: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [37/69]: Stacking v38: LSM: Add a function to report + multiple LSMs + - SAUCE: apparmor4.0.0 [38/69]: Stacking v38: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor4.0.0 [39/69]: Stacking v38: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor4.0.0 [40/69]: Stacking v38: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [41/69]: Stacking v38: Audit: Add record for multiple + object contexts + - SAUCE: apparmor4.0.0 [42/69]: Stacking v38: netlabel: Use a struct lsmblob + in audit data + - SAUCE: apparmor4.0.0 [43/69]: Stacking v38: LSM: Removed scaffolding + function lsmcontext_init + - SAUCE: apparmor4.0.0 [44/69]: Stacking v38: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor4.0.0 [45/69]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [46/69]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [47/69]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [48/69]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [49/69]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [50/69]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [51/69]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [52/69]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [53/69]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [54/69]: prompt - fix caching + - SAUCE: apparmor4.0.0 [55/69]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [56/69]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [57/69]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [58/69]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [59/69]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [60/69]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [64/69]: advertise disconnected.path is available + - SAUCE: apparmor4.0.0 [65/69]: add io_uring mediation + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [61/69]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [62/69]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [63/69]: userns - make it so special unconfined + profiles can mediate user namespaces + + * udev fails to make prctl() syscall with apparmor=0 (as used by maas by + default) (LP: #2016908) // update apparmor and LSM stacking patch set + (LP: #2028253) + - SAUCE: apparmor4.0.0 [26/69]: Stacking v38: Fix prctl() syscall with + apparmor=0 + + * Fix RPL-U CPU C-state always keep at C3 when system run PHM with idle screen + on (LP: #2042385) + - SAUCE: r8169: Add quirks to enable ASPM on Dell platforms + + * [Debian] autoreconstruct - Do not generate chmod -x for deleted files + (LP: #2045562) + - [Debian] autoreconstruct - Do not generate chmod -x for deleted files + + * Disable Legacy TIOCSTI (LP: #2046192) + - [Config]: disable CONFIG_LEGACY_TIOCSTI + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] remove helper scripts + - [Packaging] update annotations scripts + + * Miscellaneous Ubuntu changes + - [Packaging] rules: Remove unused dkms make variables + - [Config] update annotations after rebase to v6.7-rc8 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc8 + + -- Andrea Righi Tue, 02 Jan 2024 14:57:21 +0100 + +linux-unstable (6.7.0-3.3) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-3.3 -proposed tracker (LP: #2046060) + + * enable CONFIG_INTEL_TDX_HOST in linux >= 6.7 for noble (LP: #2046040) + - [Config] enable CONFIG_INTEL_TDX_HOST + + * linux tools packages for derived kernels refuse to install simultaneously + due to libcpupower name collision (LP: #2035971) + - [Packaging] Statically link libcpupower into cpupower tool + + * make lazy RCU a boot time option (LP: #2045492) + - SAUCE: rcu: Provide a boot time parameter to control lazy RCU + + * Build failure if run in a console (LP: #2044512) + - [Packaging] Fix kernel module compression failures + + * Turning COMPAT_32BIT_TIME off on arm64 (64k & derivatives) (LP: #2038582) + - [Config] y2038: Turn off COMPAT and COMPAT_32BIT_TIME on arm64 64k + + * Turning COMPAT_32BIT_TIME off on riscv64 (LP: #2038584) + - [Config] y2038: Disable COMPAT_32BIT_TIME on riscv64 + + * Turning COMPAT_32BIT_TIME off on ppc64el (LP: #2038587) + - [Config] y2038: Disable COMPAT and COMPAT_32BIT_TIME on ppc64le + + * [UBUNTU 23.04] Kernel config option missing for s390x PCI passthrough + (LP: #2042853) + - [Config] CONFIG_VFIO_PCI_ZDEV_KVM=y + + * back-out zstd module compression automatic for backports (LP: #2045593) + - [Packaging] make ZSTD module compression conditional + + * Miscellaneous Ubuntu changes + - [Packaging] Remove do_full_source variable + - [Packaging] Remove obsolete config handling + - [Packaging] Remove support for sub-flavors + - [Packaging] Remove old linux-libc-dev version hack + - [Packaging] Remove obsolete scripts + - [Packaging] Remove README.inclusion-list + - [Packaging] make $(stampdir)/stamp-build-perarch depend on build-arch + - [Packaging] Enable rootless builds + - [Packaging] Allow to run debian/rules without (fake)root + - [Packaging] remove unneeded trailing slash for INSTALL_MOD_PATH + - [Packaging] override KERNELRELEASE instead of KERNELVERSION + - [Config] update toolchain versions in annotations + - [Packaging] drop useless linux-doc + - [Packaging] scripts: Rewrite insert-ubuntu-changes in Python + - [Packaging] enable riscv64 builds + - [Packaging] remove the last sub-flavours bit + - [Packaging] check debian.env to determine do_libc_dev_package + - [Packaging] remove debian.*/variants + - [Packaging] remove do_libc_dev_package variable + - [Packaging] move linux-libc-dev.stub to debian/control.d/ + - [Packaging] Update check to build linux-libc-dev to the source package name + - [Packaging] rules: Remove startnewrelease target + - [Packaging] Remove debian/commit-templates + - [Config] update annotations after rebase to v6.7-rc4 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc4 + + -- Andrea Righi Mon, 11 Dec 2023 15:56:11 +0100 + +linux-unstable (6.7.0-2.2) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-2.2 -proposed tracker (LP: #2045107) + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable Rust + - [Config] enable Rust in annotations + - [Packaging] Remove do_enforce_all variable + - [Config] disable Softlogic 6x10 capture card driver on armhf + - [Packaging] disable Rust support + - [Config] update annotations after rebase to v6.7-rc3 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc3 + + -- Andrea Righi Wed, 29 Nov 2023 07:51:17 +0100 + +linux-unstable (6.7.0-1.1) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-1.1 -proposed tracker (LP: #2044069) + + * Packaging resync (LP: #1786013) + - [Packaging] update annotations scripts + - [Packaging] update helper scripts + + * Miscellaneous Ubuntu changes + - [Config] update annotations after rebase to v6.7-rc2 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc2 + + -- Andrea Righi Tue, 21 Nov 2023 10:45:24 +0100 + +linux-unstable (6.7.0-0.0) noble; urgency=medium + + * Empty entry + + -- Andrea Righi Tue, 21 Nov 2023 07:26:46 +0100 + +linux-unstable (6.6.0-12.12) noble; urgency=medium + + * noble/linux-unstable: 6.6.0-12.12 -proposed tracker (LP: #2043664) + + * Miscellaneous Ubuntu changes + - [Packaging] temporarily disable zfs dkms + + -- Paolo Pisati Thu, 16 Nov 2023 10:20:26 +0100 + +linux-unstable (6.6.0-11.11) noble; urgency=medium + + * noble/linux-unstable: 6.6.0-11.11 -proposed tracker (LP: #2043480) + + * Packaging resync (LP: #1786013) + - [Packaging] resync git-ubuntu-log + - [Packaging] resync update-dkms-versions helper + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/d2023.11.14) + + * Miscellaneous Ubuntu changes + - [Packaging] move to Noble + - [Config] toolchain version update + + -- Paolo Pisati Wed, 15 Nov 2023 14:50:40 +0100 + +linux-unstable (6.6.0-10.10) noble; urgency=medium + + * mantic/linux-unstable: 6.6.0-10.10 -proposed tracker (LP: #2043088) + + * Bump arm64's CONFIG_NR_CPUS to 512 (LP: #2042897) + - [Config] Bump CONFIG_NR_CPUS to 512 for arm64 + + * Miscellaneous Ubuntu changes + - [Config] Include a note for the NR_CPUS setting on riscv64 + - SAUCE: apparmor4.0.0 [83/83]: Fix inode_init for changed prototype + + -- Paolo Pisati Thu, 09 Nov 2023 12:05:11 +0200 + +linux-unstable (6.6.0-9.9) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-9.9 -proposed tracker (LP: #2041852) + + * Switch IMA default hash to sha256 (LP: #2041735) + - [Config] Switch IMA_DEFAULT_HASH from sha1 to sha256 + + * apparmor restricts read access of user namespace mediation sysctls to root + (LP: #2040194) + - SAUCE: apparmor4.0.0 [82/82]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + + * AppArmor spams kernel log with assert when auditing (LP: #2040192) + - SAUCE: apparmor4.0.0 [81/82]: apparmor: fix request field from a prompt + reply that denies all access + + * apparmor notification files verification (LP: #2040250) + - SAUCE: apparmor4.0.0 [80/82]: apparmor: fix notification header size + + * apparmor oops when racing to retrieve a notification (LP: #2040245) + - SAUCE: apparmor4.0.0 [79/82]: apparmor: fix oops when racing to retrieve + notification + + * Disable restricting unprivileged change_profile by default, due to LXD + latest/stable not yet compatible with this new apparmor feature + (LP: #2038567) + - SAUCE: apparmor4.0.0 [78/82]: apparmor: Make + apparmor_restrict_unprivileged_unconfined opt-in + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/82]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [02/82]: rename SK_CTX() to aa_sock and make it an + inline fn + - SAUCE: apparmor4.0.0 [03/82]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [04/82]: add user namespace creation mediation + - SAUCE: apparmor4.0.0 [05/82]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [06/82]: af_unix mediation + - SAUCE: apparmor4.0.0 [07/82]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [08/82]: Stacking v38: LSM: Identify modules by more + than name + - SAUCE: apparmor4.0.0 [09/82]: Stacking v38: LSM: Add an LSM identifier for + external use + - SAUCE: apparmor4.0.0 [10/82]: Stacking v38: LSM: Identify the process + attributes for each module + - SAUCE: apparmor4.0.0 [11/82]: Stacking v38: LSM: Maintain a table of LSM + attribute data + - SAUCE: apparmor4.0.0 [12/82]: Stacking v38: proc: Use lsmids instead of lsm + names for attrs + - SAUCE: apparmor4.0.0 [13/82]: Stacking v38: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [14/82]: Stacking v38: LSM: Infrastructure management + of the sock security + - SAUCE: apparmor4.0.0 [15/82]: Stacking v38: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [16/82]: Stacking v38: LSM: provide lsm name and id + slot mappings + - SAUCE: apparmor4.0.0 [17/82]: Stacking v38: IMA: avoid label collisions with + stacked LSMs + - SAUCE: apparmor4.0.0 [18/82]: Stacking v38: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [19/82]: Stacking v38: LSM: Use lsmblob in + security_kernel_act_as + - SAUCE: apparmor4.0.0 [20/82]: Stacking v38: LSM: Use lsmblob in + security_secctx_to_secid + - SAUCE: apparmor4.0.0 [21/82]: Stacking v38: LSM: Use lsmblob in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [22/82]: Stacking v38: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [23/82]: Stacking v38: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [24/82]: Stacking v38: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [25/82]: Stacking v38: LSM: Use lsmblob in + security_cred_getsecid + - SAUCE: apparmor4.0.0 [26/82]: Stacking v38: LSM: Specify which LSM to + display + - SAUCE: apparmor4.0.0 [28/82]: Stacking v38: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [29/82]: Stacking v38: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [30/82]: Stacking v38: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [31/82]: Stacking v38: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [32/82]: Stacking v38: LSM: security_secid_to_secctx in + netlink netfilter + - SAUCE: apparmor4.0.0 [33/82]: Stacking v38: NET: Store LSM netlabel data in + a lsmblob + - SAUCE: apparmor4.0.0 [34/82]: Stacking v38: binder: Pass LSM identifier for + confirmation + - SAUCE: apparmor4.0.0 [35/82]: Stacking v38: LSM: security_secid_to_secctx + module selection + - SAUCE: apparmor4.0.0 [36/82]: Stacking v38: Audit: Keep multiple LSM data in + audit_names + - SAUCE: apparmor4.0.0 [37/82]: Stacking v38: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [38/82]: Stacking v38: LSM: Add a function to report + multiple LSMs + - SAUCE: apparmor4.0.0 [39/82]: Stacking v38: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor4.0.0 [40/82]: Stacking v38: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor4.0.0 [41/82]: Stacking v38: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [42/82]: Stacking v38: Audit: Add record for multiple + object contexts + - SAUCE: apparmor4.0.0 [43/82]: Stacking v38: netlabel: Use a struct lsmblob + in audit data + - SAUCE: apparmor4.0.0 [44/82]: Stacking v38: LSM: Removed scaffolding + function lsmcontext_init + - SAUCE: apparmor4.0.0 [45/82]: Stacking v38: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor4.0.0 [46/82]: combine common_audit_data and + apparmor_audit_data + - SAUCE: apparmor4.0.0 [47/82]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [48/82]: rename audit_data->label to + audit_data->subj_label + - SAUCE: apparmor4.0.0 [49/82]: pass cred through to audit info. + - SAUCE: apparmor4.0.0 [50/82]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/82]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/82]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/82]: cache buffers on percpu list if there is lock + contention + - SAUCE: apparmor4.0.0 [54/82]: advertise availability of exended perms + - SAUCE: apparmor4.0.0 [56/82]: cleanup: provide separate audit messages for + file and policy checks + - SAUCE: apparmor4.0.0 [57/82]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [58/82]: prompt - ref count pdb + - SAUCE: apparmor4.0.0 [59/82]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [60/82]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [61/82]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [62/82]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [63/82]: prompt - fix caching + - SAUCE: apparmor4.0.0 [64/82]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [65/82]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [66/82]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [67/82]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [68/82]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [69/82]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [74/82]: advertise disconnected.path is available + - SAUCE: apparmor4.0.0 [75/82]: fix invalid reference on profile->disconnected + - SAUCE: apparmor4.0.0 [76/82]: add io_uring mediation + - SAUCE: apparmor4.0.0 [77/82]: apparmor: Fix regression in mount mediation + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [70/82]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [71/82]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [72/82]: userns - make it so special unconfined + profiles can mediate user namespaces + - SAUCE: apparmor4.0.0 [73/82]: userns - allow restricting unprivileged + change_profile + + * LSM stacking and AppArmor for 6.2: additional fixes (LP: #2017903) // update + apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [55/82]: fix profile verification and enable it + + * udev fails to make prctl() syscall with apparmor=0 (as used by maas by + default) (LP: #2016908) // update apparmor and LSM stacking patch set + (LP: #2028253) + - SAUCE: apparmor4.0.0 [27/82]: Stacking v38: Fix prctl() syscall with + apparmor=0 + + * Miscellaneous Ubuntu changes + - [Config] SECURITY_APPARMOR_RESTRICT_USERNS=y + + -- Paolo Pisati Fri, 03 Nov 2023 11:59:12 +0100 + +linux-unstable (6.6.0-8.8) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-8.8 -proposed tracker (LP: #2040243) + + * Miscellaneous Ubuntu changes + - abi: gc reference to phy-rtk-usb2/phy-rtk-usb3 + + -- Paolo Pisati Tue, 24 Oct 2023 10:55:34 +0200 + +linux-unstable (6.6.0-7.7) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-7.7 -proposed tracker (LP: #2040147) + + * test_021_aslr_dapper_libs from ubuntu_qrt_kernel_security failed on K-5.19 / + J-OEM-6.1 / J-6.2 AMD64 (LP: #1983357) + - [Config]: set ARCH_MMAP_RND_{COMPAT_, }BITS to the maximum + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.6-rc7 rebase + + -- Paolo Pisati Mon, 23 Oct 2023 11:51:14 +0200 + +linux-unstable (6.6.0-6.6) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-6.6 -proposed tracker (LP: #2039780) + + * Miscellaneous Ubuntu changes + - rebase on v6.6-rc6 + - [Config] updateconfigs following v6.6-rc6 rebase + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc6 + + -- Paolo Pisati Thu, 19 Oct 2023 12:09:16 +0200 + +linux-unstable (6.6.0-5.5) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-5.5 -proposed tracker (LP: #2038899) + + * Miscellaneous Ubuntu changes + - rebase on v6.6-rc5 + - [Config] updateconfigs following v6.6-rc5 rebase + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc5 + + -- Paolo Pisati Tue, 10 Oct 2023 11:18:41 +0200 + +linux-unstable (6.6.0-4.4) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-4.4 -proposed tracker (LP: #2038423) + + * Miscellaneous Ubuntu changes + - rebase on v6.6-rc4 + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc4 + + -- Paolo Pisati Wed, 04 Oct 2023 11:16:25 +0200 + +linux-unstable (6.6.0-3.3) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-3.3 -proposed tracker (LP: #2037622) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.6-rc3 rebase + + * Miscellaneous upstream changes + - Revert "UBUNTU: SAUCE: enforce rust availability only on x86_64" + - arm64: rust: Enable Rust support for AArch64 + - arm64: rust: Enable PAC support for Rust. + - arm64: Restrict Rust support to little endian only. + + -- Paolo Pisati Thu, 28 Sep 2023 10:45:38 +0200 + +linux-unstable (6.6.0-2.2) mantic; urgency=medium + + * Miscellaneous upstream changes + - UBUBNTU: [Config] build all COMEDI drivers as modules + + -- Paolo Pisati Mon, 18 Sep 2023 14:42:56 +0200 + +linux-unstable (6.6.0-1.1) mantic; urgency=medium + + * Miscellaneous Ubuntu changes + - [Packaging] move linux to linux-unstable + - [Packaging] rebase on v6.6-rc1 + - [Config] updateconfigs following v6.6-rc1 rebase + - [packaging] skip ABI, modules and retpoline checks + - update dropped.txt + - [Config] SHIFT_FS FTBFS with Linux 6.6, disable it + - [Config] DELL_UART_BACKLIGHT FTBFS with Linux 6.6, disable it + - [Packaging] debian/dkms-versions: temporarily disable dkms + - [Packaging] temporarily disable signing for s390x + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc1 + + -- Paolo Pisati Fri, 15 Sep 2023 14:42:18 +0200 + +linux-unstable (6.6.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Paolo Pisati Thu, 14 Sep 2023 15:03:19 +0200 + +linux (6.5.0-5.5) mantic; urgency=medium + + * mantic/linux: 6.5.0-5.5 -proposed tracker (LP: #2034546) + + * Packaging resync (LP: #1786013) + - [Packaging] update helper scripts + - debian/dkms-versions -- update from kernel-versions (main/d2023.08.23) + + +linux (6.5.0-4.4) mantic; urgency=medium + + * mantic/linux: 6.5.0-4.4 -proposed tracker (LP: #2034042) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/d2023.08.23) + + -- Andrea Righi Mon, 04 Sep 2023 16:55:44 +0200 + +linux (6.5.0-3.3) mantic; urgency=medium + + * mantic/linux: 6.5.0-3.3 -proposed tracker (LP: #2033904) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/d2023.08.23) + + * [23.10] Please test secure-boot and lockdown on the early 6.5 kernel (s390x) + (LP: #2026833) + - [Packaging] re-enable signing for s390x + + * Miscellaneous upstream changes + - module/decompress: use vmalloc() for zstd decompression workspace + + -- Andrea Righi Fri, 01 Sep 2023 16:15:33 +0200 + +linux (6.5.0-2.2) mantic; urgency=medium + + * mantic/linux: 6.5.0-2.2 -proposed tracker (LP: #2033240) + + * Soundwire support for Dell SKU0C87 devices (LP: #2029281) + - SAUCE: ASoC: Intel: soc-acpi: add support for Dell SKU0C87 devices + + * Fix numerous AER related issues (LP: #2033025) + - SAUCE: PCI/AER: Disable AER service during suspend, again + - SAUCE: PCI/DPC: Disable DPC service during suspend, again + + * Support Realtek RTL8852CE WiFi 6E/BT Combo (LP: #2025672) + - wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set() + - Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C + + [ Upstream Kernel Changes ] + + * Rebase to v6.5 + + -- Andrea Righi Mon, 28 Aug 2023 08:53:19 +0200 + +linux (6.5.0-1.1) mantic; urgency=medium + + * mantic/linux: 6.5.0-1.1 -proposed tracker (LP: #2032750) + + * Packaging resync (LP: #1786013) + - [Packaging] resync update-dkms-versions helper + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/d2023.07.26) + + * ceph: support idmapped mounts (LP: #2032959) + - SAUCE: libceph: add spinlock around osd->o_requests + - SAUCE: libceph: define struct ceph_sparse_extent and add some helpers + - SAUCE: libceph: new sparse_read op, support sparse reads on msgr2 crc + codepath + - SAUCE: libceph: support sparse reads on msgr2 secure codepath + - SAUCE: libceph: add sparse read support to msgr1 + - SAUCE: libceph: add sparse read support to OSD client + - SAUCE: ceph: add new mount option to enable sparse reads + - SAUCE: ceph: preallocate inode for ops that may create one + - SAUCE: ceph: make ceph_msdc_build_path use ref-walk + - SAUCE: libceph: add new iov_iter-based ceph_msg_data_type and + ceph_osd_data_type + - SAUCE: ceph: use osd_req_op_extent_osd_iter for netfs reads + - SAUCE: ceph: fscrypt_auth handling for ceph + - SAUCE: ceph: implement -o test_dummy_encryption mount option + - SAUCE: ceph: add fscrypt ioctls and ceph.fscrypt.auth vxattr + - SAUCE: ceph: make ioctl cmds more readable in debug log + - SAUCE: ceph: add base64 endcoding routines for encrypted names + - SAUCE: ceph: encode encrypted name in ceph_mdsc_build_path and dentry + release + - SAUCE: ceph: send alternate_name in MClientRequest + - SAUCE: ceph: decode alternate_name in lease info + - SAUCE: ceph: set DCACHE_NOKEY_NAME flag in ceph_lookup/atomic_open() + - SAUCE: ceph: make d_revalidate call fscrypt revalidator for encrypted + dentries + - SAUCE: ceph: add helpers for converting names for userland presentation + - SAUCE: ceph: make ceph_fill_trace and ceph_get_name decrypt names + - SAUCE: ceph: pass the request to parse_reply_info_readdir() + - SAUCE: ceph: add support to readdir for encrypted names + - SAUCE: ceph: create symlinks with encrypted and base64-encoded targets + - SAUCE: ceph: add some fscrypt guardrails + - SAUCE: ceph: allow encrypting a directory while not having Ax caps + - SAUCE: ceph: mark directory as non-complete after loading key + - SAUCE: ceph: size handling in MClientRequest, cap updates and inode traces + - SAUCE: ceph: handle fscrypt fields in cap messages from MDS + - SAUCE: ceph: add infrastructure for file encryption and decryption + - SAUCE: libceph: add CEPH_OSD_OP_ASSERT_VER support + - SAUCE: libceph: allow ceph_osdc_new_request to accept a multi-op read + - SAUCE: ceph: add object version support for sync read + - SAUCE: ceph: add truncate size handling support for fscrypt + - SAUCE: ceph: don't use special DIO path for encrypted inodes + - SAUCE: ceph: align data in pages in ceph_sync_write + - SAUCE: ceph: add read/modify/write to ceph_sync_write + - SAUCE: ceph: add encryption support to writepage and writepages + - SAUCE: ceph: plumb in decryption during reads + - SAUCE: ceph: invalidate pages when doing direct/sync writes + - SAUCE: ceph: add support for encrypted snapshot names + - SAUCE: ceph: prevent snapshot creation in encrypted locked directories + - SAUCE: ceph: update documentation regarding snapshot naming limitations + - SAUCE: ceph: drop messages from MDS when unmounting + - SAUCE: ceph: wait for OSD requests' callbacks to finish when unmounting + - SAUCE: ceph: fix updating i_truncate_pagecache_size for fscrypt + - SAUCE: ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper + - SAUCE: libceph: do not include crypto/algapi.h + - SAUCE: rbd: bump RBD_MAX_PARENT_CHAIN_LEN to 128 + - SAUCE: ceph: dump info about cap flushes when we're waiting too long for + them + - SAUCE: mm: BUG if filemap_alloc_folio gives us a folio with a non-NULL + ->private + - SAUCE: ceph: make sure all the files successfully put before unmounting + - SAUCE: ceph: BUG if MDS changed truncate_seq with client caps still + outstanding + - SAUCE: ceph: add the *_client debug macros support + - SAUCE: ceph: pass the mdsc to several helpers + - SAUCE: ceph: rename _to_client() to _to_fs_client() + - SAUCE: ceph: move mdsmap.h to fs/ceph/ + - SAUCE: ceph: add ceph_inode_to_client() helper support + - SAUCE: ceph: print the client global_id in all the debug logs + - SAUCE: ceph: make the members in struct ceph_mds_request_args_ext an union + - SAUCE: ceph: make num_fwd and num_retry to __u32 + - SAUCE: fs: export mnt_idmap_get/mnt_idmap_put + - SAUCE: ceph: stash idmapping in mdsc request + - SAUCE: ceph: handle idmapped mounts in create_request_message() + - SAUCE: ceph: add enable_unsafe_idmap module parameter + - SAUCE: ceph: pass an idmapping to mknod/symlink/mkdir + - SAUCE: ceph: allow idmapped getattr inode op + - SAUCE: ceph: allow idmapped permission inode op + - SAUCE: ceph: pass idmap to __ceph_setattr + - SAUCE: ceph: allow idmapped setattr inode op + - SAUCE: ceph/acl: allow idmapped set_acl inode op + - SAUCE: ceph/file: allow idmapped atomic_open inode op + - SAUCE: ceph: allow idmapped mounts + + * Got soft lockup CPU if dell_uart_backlight is probed (LP: #2032174) + - SAUCE: platform/x86: dell-uart-backlight: replace chars_in_buffer() with + flush_chars() + + * Fix ACPI TAD on some Intel based systems (LP: #2032767) + - ACPI: TAD: Install SystemCMOS address space handler for ACPI000E + + * Fix unreliable ethernet cable detection on I219 NIC (LP: #2028122) + - e1000e: Use PME poll to circumvent unreliable ACPI wake + + * Fix panel brightness issues on HP laptops (LP: #2032704) + - ACPI: video: Put ACPI video and its child devices into D0 on boot + + * FATAL:credentials.cc(127)] Check failed: . : Permission denied (13) + (LP: #2017980) + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * Support initrdless boot on default qemu virt models and openstack + (LP: #2030745) + - [Config] set VIRTIO_BLK=y for default qemu/openstack boot + + * Miscellaneous Ubuntu changes + - [Packaging] rust: use Rust 1.68.2 + - [Packaging] depend on clang/libclang-15 for Rust + - [Config] update toolchain versions in annotations + - [Config] update annotations after rebase to v6.5-rc6 + - [Config] update toolchain version in annotations + - [Packaging] temporarily disable Rust support + - [Packaging] temporarily disable signing for ppc64el + - [Packaging] temporarily disable signing for s390x + + -- Andrea Righi Thu, 24 Aug 2023 17:47:10 +0200 + +linux (6.5.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Andrea Righi Wed, 23 Aug 2023 08:14:48 +0200 + +linux-unstable (6.5.0-4.4) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-4.4 -proposed tracker (LP: #2029086) + + * Miscellaneous Ubuntu changes + - [Packaging] Add .NOTPARALLEL + - [Packaging] Remove meaningless $(header_arch) + - [Packaging] Fix File exists error in install-arch-headers + - [Packaging] clean debian/linux-* directories + - [Packaging] remove hmake + - [Packaging] install headers to debian/linux-libc-dev directly + - [Config] define CONFIG options for arm64 instead of arm64-generic + - [Config] update annotations after rebase to v6.5-rc4 + - [Packaging] temporarily disable Rust support + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc4 + + -- Andrea Righi Mon, 31 Jul 2023 08:41:59 +0200 + +linux-unstable (6.5.0-3.3) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-3.3 -proposed tracker (LP: #2028779) + + * enable Rust support in the kernel (LP: #2007654) + - SAUCE: rust: support rustc-1.69.0 + - [Packaging] depend on rustc-1.69.0 + + * Packaging resync (LP: #1786013) + - [Packaging] resync update-dkms-versions helper + - [Packaging] resync getabis + + * Fix UBSAN in Intel EDAC driver (LP: #2028746) + - EDAC/i10nm: Skip the absent memory controllers + + * Ship kernel modules Zstd compressed (LP: #2028568) + - SAUCE: Support but do not require compressed modules + - [Config] Enable support for ZSTD compressed modules + - [Packaging] ZSTD compress modules + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor3.2.0 [02/60]: rename SK_CTX() to aa_sock and make it an + inline fn + - SAUCE: apparmor3.2.0 [05/60]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor3.2.0 [08/60]: Stacking v38: LSM: Identify modules by more + than name + - SAUCE: apparmor3.2.0 [09/60]: Stacking v38: LSM: Add an LSM identifier for + external use + - SAUCE: apparmor3.2.0 [10/60]: Stacking v38: LSM: Identify the process + attributes for each module + - SAUCE: apparmor3.2.0 [11/60]: Stacking v38: LSM: Maintain a table of LSM + attribute data + - SAUCE: apparmor3.2.0 [12/60]: Stacking v38: proc: Use lsmids instead of lsm + names for attrs + - SAUCE: apparmor3.2.0 [13/60]: Stacking v38: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor3.2.0 [14/60]: Stacking v38: LSM: Infrastructure management + of the sock security + - SAUCE: apparmor3.2.0 [15/60]: Stacking v38: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor3.2.0 [16/60]: Stacking v38: LSM: provide lsm name and id + slot mappings + - SAUCE: apparmor3.2.0 [17/60]: Stacking v38: IMA: avoid label collisions with + stacked LSMs + - SAUCE: apparmor3.2.0 [18/60]: Stacking v38: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor3.2.0 [19/60]: Stacking v38: LSM: Use lsmblob in + security_kernel_act_as + - SAUCE: apparmor3.2.0 [20/60]: Stacking v38: LSM: Use lsmblob in + security_secctx_to_secid + - SAUCE: apparmor3.2.0 [21/60]: Stacking v38: LSM: Use lsmblob in + security_secid_to_secctx + - SAUCE: apparmor3.2.0 [22/60]: Stacking v38: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor3.2.0 [23/60]: Stacking v38: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor3.2.0 [24/60]: Stacking v38: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor3.2.0 [25/60]: Stacking v38: LSM: Use lsmblob in + security_cred_getsecid + - SAUCE: apparmor3.2.0 [26/60]: Stacking v38: LSM: Specify which LSM to + display + - SAUCE: apparmor3.2.0 [28/60]: Stacking v38: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor3.2.0 [29/60]: Stacking v38: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor3.2.0 [30/60]: Stacking v38: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor3.2.0 [31/60]: Stacking v38: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor3.2.0 [32/60]: Stacking v38: LSM: security_secid_to_secctx in + netlink netfilter + - SAUCE: apparmor3.2.0 [33/60]: Stacking v38: NET: Store LSM netlabel data in + a lsmblob + - SAUCE: apparmor3.2.0 [34/60]: Stacking v38: binder: Pass LSM identifier for + confirmation + - SAUCE: apparmor3.2.0 [35/60]: Stacking v38: LSM: security_secid_to_secctx + module selection + - SAUCE: apparmor3.2.0 [36/60]: Stacking v38: Audit: Keep multiple LSM data in + audit_names + - SAUCE: apparmor3.2.0 [37/60]: Stacking v38: Audit: Create audit_stamp + structure + - SAUCE: apparmor3.2.0 [38/60]: Stacking v38: LSM: Add a function to report + multiple LSMs + - SAUCE: apparmor3.2.0 [39/60]: Stacking v38: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor3.2.0 [40/60]: Stacking v38: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor3.2.0 [41/60]: Stacking v38: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor3.2.0 [42/60]: Stacking v38: Audit: Add record for multiple + object contexts + - SAUCE: apparmor3.2.0 [43/60]: Stacking v38: netlabel: Use a struct lsmblob + in audit data + - SAUCE: apparmor3.2.0 [44/60]: Stacking v38: LSM: Removed scaffolding + function lsmcontext_init + - SAUCE: apparmor3.2.0 [45/60]: Stacking v38: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor3.2.0 [46/60]: combine common_audit_data and + apparmor_audit_data + - SAUCE: apparmor3.2.0 [47/60]: setup slab cache for audit data + - SAUCE: apparmor3.2.0 [48/60]: rename audit_data->label to + audit_data->subj_label + - SAUCE: apparmor3.2.0 [49/60]: pass cred through to audit info. + - SAUCE: apparmor3.2.0 [50/60]: Improve debug print infrastructure + - SAUCE: apparmor3.2.0 [51/60]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor3.2.0 [52/60]: enable userspace upcall for mediation + - SAUCE: apparmor3.2.0 [53/60]: cache buffers on percpu list if there is lock + contention + - SAUCE: apparmor3.2.0 [55/60]: advertise availability of exended perms + - SAUCE: apparmor3.2.0 [60/60]: [Config] enable + CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * LSM stacking and AppArmor for 6.2: additional fixes (LP: #2017903) // update + apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor3.2.0 [57/60]: fix profile verification and enable it + + * udev fails to make prctl() syscall with apparmor=0 (as used by maas by + default) (LP: #2016908) // update apparmor and LSM stacking patch set + (LP: #2028253) + - SAUCE: apparmor3.2.0 [27/60]: Stacking v38: Fix prctl() syscall with + apparmor=0 + + * kinetic: apply new apparmor and LSM stacking patch set (LP: #1989983) // + update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor3.2.0 [01/60]: add/use fns to print hash string hex value + - SAUCE: apparmor3.2.0 [03/60]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor3.2.0 [04/60]: add user namespace creation mediation + - SAUCE: apparmor3.2.0 [06/60]: af_unix mediation + - SAUCE: apparmor3.2.0 [07/60]: Add fine grained mediation of posix mqueues + + * Miscellaneous Ubuntu changes + - [Packaging] Use consistent llvm/clang for rust + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc3 + + -- Andrea Righi Fri, 28 Jul 2023 07:44:20 +0200 + +linux-unstable (6.5.0-2.2) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-2.2 -proposed tracker (LP: #2027953) + + * Remove non-LPAE kernel flavor (LP: #2025265) + - [Packaging] Rename armhf generic-lpae flavor to generic + + * Please enable Renesas RZ platform serial installer (LP: #2022361) + - [Config] enable hihope RZ/G2M serial console + + * Miscellaneous Ubuntu changes + - [Packaging] snap: Remove old configs handling + - [Packaging] checks/final-checks: Remove old configs handling + - [Packaging] checks/final-checks: check existance of Makefile first + - [Packaging] checks/final-checks: Fix shellcheck issues + - [Packaging] add libstdc++-dev to the build dependencies + - [Config] update annotations after rebase to v6.5-rc2 + + * Miscellaneous upstream changes + - kbuild: rust: avoid creating temporary files + - rust: fix bindgen build error with UBSAN_BOUNDS_STRICT + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc2 + + -- Andrea Righi Tue, 18 Jul 2023 10:14:14 +0200 + +linux-unstable (6.5.0-1.1) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-1.1 -proposed tracker (LP: #2026689) + + * CVE-2023-31248 + - netfilter: nf_tables: do not ignore genmask when looking up chain by id + + * CVE-2023-35001 + - netfilter: nf_tables: prevent OOB access in nft_byteorder_eval + + * HDMI output with More than one child device for port B in VBT error + (LP: #2025195) + - SAUCE: drm/i915/quirks: Add multiple VBT quirk for HP ZBook Power G10 + + * CVE-2023-2640 // CVE-2023-32629 + - SAUCE: overlayfs: default to userxattr when mounted from non initial user + namespace + + * Packaging resync (LP: #1786013) + - [Packaging] resync update-dkms-versions helper + + * enable Rust support in the kernel (LP: #2007654) + - SAUCE: btf, scripts: rust: drop is_rust_module.sh + - [Packaging] add rust dependencies + + * CVE-2023-2612 + - SAUCE: shiftfs: prevent lock unbalance in shiftfs_create_object() + + * Miscellaneous Ubuntu changes + - SAUCE: shiftfs: support linux 6.5 + - [Config] update annotations after rebase to v6.5-rc1 + - [Config] temporarily disable Rust + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc1 + + -- Andrea Righi Mon, 10 Jul 2023 09:15:26 +0200 + +linux-unstable (6.5.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Andrea Righi Wed, 05 Jul 2023 12:48:39 +0200 + +linux-unstable (6.4.0-8.8) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-8.8 -proposed tracker (LP: #2025018) + + * Miscellaneous Ubuntu changes + - [Config] update toolchain version (gcc) in annotations + + [ Upstream Kernel Changes ] + + * Rebase to v6.4 + + -- Andrea Righi Mon, 26 Jun 2023 09:14:02 +0200 + +linux-unstable (6.4.0-7.7) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-7.7 -proposed tracker (LP: #2024338) + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc7 + + -- Andrea Righi Mon, 19 Jun 2023 08:51:27 +0200 + +linux-unstable (6.4.0-6.6) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-6.6 -proposed tracker (LP: #2023966) + + * Packaging resync (LP: #1786013) + - [Packaging] update annotations scripts + + * enable multi-gen LRU by default (LP: #2023629) + - [Config] enable multi-gen LRU by default + + * Fix Monitor lost after replug WD19TBS to SUT port with VGA/DVI to type-C + dongle (LP: #2021949) + - thunderbolt: Do not touch CL state configuration during discovery + - thunderbolt: Increase DisplayPort Connection Manager handshake timeout + + * Neuter signing tarballs (LP: #2012776) + - [Packaging] remove the signing tarball support + + * Enable Tracing Configs for OSNOISE and TIMERLAT (LP: #2018591) + - [Config] Enable OSNOISE_TRACER and TIMERLAT_TRACER configs + + * Miscellaneous Ubuntu changes + - [Config] Add CONFIG_AS_HAS_NON_CONST_LEB128 on riscv64 + - [Packaging] introduce do_lib_rust and enable it only on generic amd64 + - [Config] update annotations after rebase to v6.4-rc6 + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc6 + + -- Andrea Righi Thu, 15 Jun 2023 20:11:07 +0200 + +linux-unstable (6.4.0-5.5) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-5.5 -proposed tracker (LP: #2022886) + + * Miscellaneous Ubuntu changes + - [Packaging] update getabis to support linux-unstable + - UBUNTU [Config]: disable hibernation on riscv64 + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc5 + + -- Andrea Righi Tue, 06 Jun 2023 08:18:01 +0200 + +linux-unstable (6.4.0-4.4) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-4.4 -proposed tracker (LP: #2021597) + + * Miscellaneous Ubuntu changes + - [Config] udpate annotations after rebase to v6.4-rc4 + + -- Andrea Righi Tue, 30 May 2023 11:55:41 +0200 + +linux-unstable (6.4.0-3.3) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-3.3 -proposed tracker (LP: #2021497) + + * Packaging resync (LP: #1786013) + - [Packaging] resync git-ubuntu-log + - [Packaging] resync getabis + + * support python < 3.9 with annotations (LP: #2020531) + - [Packaging] kconfig/annotations.py: support older way of merging dicts + + * generate linux-lib-rust only on amd64 (LP: #2020356) + - [Packaging] generate linux-lib-rust only on amd64 + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: never drop configs that have notes different than + the parent + - [Config] drop CONFIG_SMBFS_COMMON from annotations + - [Packaging] perf: build without libtraceevent + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc4 + + -- Andrea Righi Tue, 30 May 2023 08:38:10 +0200 + +linux-unstable (6.4.0-2.2) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-2.2 -proposed tracker (LP: #2020330) + + * Computer with Intel Atom CPU will not boot with Kernel 6.2.0-20 + (LP: #2017444) + - [Config]: Disable CONFIG_INTEL_ATOMISP + + * Fix NVME storage with RAID ON disappeared under Dell factory WINPE + environment (LP: #2011768) + - SAUCE: PCI: vmd: Reset VMD config register between soft reboots + + * Miscellaneous Ubuntu changes + - [Packaging] Drop support of old config handling + - [Config] update annotations after rebase to v6.4-rc3 + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc3 + + -- Andrea Righi Mon, 22 May 2023 11:22:14 +0200 + +linux-unstable (6.4.0-1.1) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-1.1 -proposed tracker (LP: #2019965) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] update helper scripts + + * Kernel 6.1 bumped the disk consumption on default images by 15% + (LP: #2015867) + - [Packaging] introduce a separate linux-lib-rust package + + * Miscellaneous Ubuntu changes + - [Config] enable CONFIG_BLK_DEV_UBLK on amd64 + - [Packaging] annotations: use python3 in the shebang + - SAUCE: blk-throttle: Fix io statistics for cgroup v1 + - [Packaging] move to v6.4 and rename to linux-unstable + - [Config] update annotations after rebase to v6.4-rc1 + - [Packaging] temporarily disable perf + - [Packaging] temporarily disable bpftool + - [Config] ppc64el: reduce CONFIG_ARCH_FORCE_MAX_ORDER from 9 to 8 + - SAUCE: perf: explicitly disable libtraceevent + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc2 + + -- Andrea Righi Thu, 18 May 2023 07:34:09 +0200 + +linux-unstable (6.4.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Andrea Righi Wed, 17 May 2023 15:29:25 +0200 + +linux-unstable (6.3.0-2.2) lunar; urgency=medium + + * lunar/linux-unstable: 6.3.0-2.2 -proposed tracker (LP: #2017788) + + * Miscellaneous Ubuntu changes + - [Packaging] move python3-dev to build-depends + + -- Andrea Righi Wed, 26 Apr 2023 21:52:12 +0200 + +linux-unstable (6.3.0-1.1) lunar; urgency=medium + + * lunar/linux-unstable: 6.3.0-1.1 -proposed tracker (LP: #2017776) + + * RFC: virtio and virtio-scsi should be built in (LP: #1685291) + - [Config] Mark CONFIG_SCSI_VIRTIO built-in + + * Debian autoreconstruct Fix restoration of execute permissions (LP: #2015498) + - [Debian] autoreconstruct - fix restoration of execute permissions + + * [SRU][Jammy] CONFIG_PCI_MESON is not enabled (LP: #2007745) + - [Config] arm64: Enable PCI_MESON module + + * vmd may fail to create sysfs entry while `pci_rescan_bus()` called in some + other drivers like wwan (LP: #2011389) + - SAUCE: PCI: vmd: guard device addition and removal + + * Lunar update: v6.2.9 upstream stable release (LP: #2016877) + - [Config] ppc64: updateconfigs following v6.2.9 stable updates + + * Lunar update: v6.2.8 upstream stable release (LP: #2016876) + - [Config] ppc64: updateconfigs following v6.2.8 stable updates + + * Miscellaneous Ubuntu changes + - [Packaging] Move final-checks script to debian/scripts/checks + - [Packaging] checks/final-checks: Honor 'do_skip_checks' + - [Packaging] Drop wireguard DKMS + - [Packaging] Remove update-version-dkms + - [Packaging] debian/rules: Add DKMS info to 'printenv' output + - [Packaging] ignore KBUILD_VERBOSE in arch-has-odm-enabled.sh + - SAUCE: shiftfs: support linux 6.3 + - [Packaging] move to v6.3 and rename to linux-unstable + - [Config] latency-related optimizations + - [Config] update annotations after rebase to v6.3 + - [Packaging] temporarily disable dkms + + [ Upstream Kernel Changes ] + + * Rebase to v6.3 + + -- Andrea Righi Wed, 26 Apr 2023 14:53:52 +0200 + +linux-unstable (6.3.0-0.0) lunar; urgency=medium + + * Empty entry + + -- Andrea Righi Tue, 25 Apr 2023 10:24:12 +0200 + +linux (6.2.0-21.21) lunar; urgency=medium + + * lunar/linux: 6.2.0-21.21 -proposed tracker (LP: #2016249) + + * efivarfs:efivarfs.sh in ubuntu_kernel_selftests crash L-6.2 ARM64 node + dazzle (rcu_preempt detected stalls) (LP: #2015741) + - efi/libstub: smbios: Use length member instead of record struct size + - arm64: efi: Use SMBIOS processor version to key off Ampere quirk + - efi/libstub: smbios: Drop unused 'recsize' parameter + + * Miscellaneous Ubuntu changes + - SAUCE: selftests/bpf: ignore pointer types check with clang + - SAUCE: selftests/bpf: avoid conflicting data types in profiler.inc.h + - [Packaging] get rid of unnecessary artifacts in linux-headers + + * Miscellaneous upstream changes + - Revert "UBUNTU: SAUCE: Revert "efi: random: refresh non-volatile random seed + when RNG is initialized"" + - Revert "UBUNTU: SAUCE: Revert "efi: random: fix NULL-deref when refreshing + seed"" + + -- Andrea Righi Fri, 14 Apr 2023 12:11:49 +0200 + +linux (6.2.0-20.20) lunar; urgency=medium + + * lunar/linux: 6.2.0-20.20 -proposed tracker (LP: #2015429) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/master) + + * FTBFS with different dkms or when makeflags are set (LP: #2015361) + - [Packaging] FTBFS with different dkms or when makeflags are set + + * expoline.o is packaged unconditionally for s390x (LP: #2013209) + - [Packaging] Copy expoline.o only when produced by the build + + * net:l2tp.sh failure with lunar:linux 6.2 (LP: #2013014) + - SAUCE: l2tp: generate correct module alias strings + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: prevent duplicate include lines + + -- Andrea Righi Thu, 06 Apr 2023 08:33:14 +0200 + +linux (6.2.0-19.19) lunar; urgency=medium + + * lunar/linux: 6.2.0-19.19 -proposed tracker (LP: #2012488) + + * Neuter signing tarballs (LP: #2012776) + - [Packaging] neuter the signing tarball + + * LSM stacking and AppArmor refresh for 6.2 kernel (LP: #2012136) + - Revert "UBUNTU: [Config] define CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS" + - Revert "UBUNTU: SAUCE: apparmor: add user namespace creation mediation" + - Revert "UBUNTU: SAUCE: apparmor: Add fine grained mediation of posix + mqueues" + - Revert "UBUNTU: SAUCE: Revert "apparmor: make __aa_path_perm() static"" + - Revert "UBUNTU: SAUCE: LSM: Specify which LSM to display (using struct cred + as input)" + - Revert "UBUNTU: SAUCE: apparmor: Fix build error, make sk parameter const" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in smk_netlbl_mls()" + - Revert "UBUNTU: SAUCE: LSM: change ima_read_file() to use lsmblob" + - Revert "UBUNTU: SAUCE: apparmor: rename kzfree() to kfree_sensitive()" + - Revert "UBUNTU: SAUCE: AppArmor: Remove the exclusive flag" + - Revert "UBUNTU: SAUCE: LSM: Add /proc attr entry for full LSM context" + - Revert "UBUNTU: SAUCE: Audit: Fix incorrect static inline function + declration." + - Revert "UBUNTU: SAUCE: Audit: Fix for missing NULL check" + - Revert "UBUNTU: SAUCE: Audit: Add a new record for multiple object LSM + attributes" + - Revert "UBUNTU: SAUCE: Audit: Add new record for multiple process LSM + attributes" + - Revert "UBUNTU: SAUCE: NET: Store LSM netlabel data in a lsmblob" + - Revert "UBUNTU: SAUCE: LSM: security_secid_to_secctx in netlink netfilter" + - Revert "UBUNTU: SAUCE: LSM: Use lsmcontext in security_inode_getsecctx" + - Revert "UBUNTU: SAUCE: LSM: Use lsmcontext in security_secid_to_secctx" + - Revert "UBUNTU: SAUCE: LSM: Ensure the correct LSM context releaser" + - Revert "UBUNTU: SAUCE: LSM: Specify which LSM to display" + - Revert "UBUNTU: SAUCE: IMA: Change internal interfaces to use lsmblobs" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_cred_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_inode_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_task_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_ipc_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_secid_to_secctx" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_secctx_to_secid" + - Revert "UBUNTU: SAUCE: net: Prepare UDS for security module stacking" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_kernel_act_as" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_audit_rule_match" + - Revert "UBUNTU: SAUCE: LSM: Create and manage the lsmblob data structure." + - Revert "UBUNTU: SAUCE: LSM: Infrastructure management of the sock security" + - Revert "UBUNTU: SAUCE: apparmor: LSM stacking: switch from SK_CTX() to + aa_sock()" + - Revert "UBUNTU: SAUCE: apparmor: rename aa_sock() to aa_unix_sk()" + - Revert "UBUNTU: SAUCE: apparmor: disable showing the mode as part of a secid + to secctx" + - Revert "UBUNTU: SAUCE: apparmor: fix use after free in sk_peer_label" + - Revert "UBUNTU: SAUCE: apparmor: af_unix mediation" + - Revert "UBUNTU: SAUCE: apparmor: patch to provide compatibility with v2.x + net rules" + - Revert "UBUNTU: SAUCE: apparmor: add/use fns to print hash string hex value" + - SAUCE: apparmor: rename SK_CTX() to aa_sock and make it an inline fn + - SAUCE: apparmor: Add sysctls for additional controls of unpriv userns + restrictions + - SAUCE: Stacking v38: LSM: Identify modules by more than name + - SAUCE: Stacking v38: LSM: Add an LSM identifier for external use + - SAUCE: Stacking v38: LSM: Identify the process attributes for each module + - SAUCE: Stacking v38: LSM: Maintain a table of LSM attribute data + - SAUCE: Stacking v38: proc: Use lsmids instead of lsm names for attrs + - SAUCE: Stacking v38: integrity: disassociate ima_filter_rule from + security_audit_rule + - SAUCE: Stacking v38: LSM: Infrastructure management of the sock security + - SAUCE: Stacking v38: LSM: Add the lsmblob data structure. + - SAUCE: Stacking v38: LSM: provide lsm name and id slot mappings + - SAUCE: Stacking v38: IMA: avoid label collisions with stacked LSMs + - SAUCE: Stacking v38: LSM: Use lsmblob in security_audit_rule_match + - SAUCE: Stacking v38: LSM: Use lsmblob in security_kernel_act_as + - SAUCE: Stacking v38: LSM: Use lsmblob in security_secctx_to_secid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_secid_to_secctx + - SAUCE: Stacking v38: LSM: Use lsmblob in security_ipc_getsecid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_current_getsecid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_inode_getsecid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_cred_getsecid + - SAUCE: Stacking v38: LSM: Specify which LSM to display + - SAUCE: Stacking v38: LSM: Ensure the correct LSM context releaser + - SAUCE: Stacking v38: LSM: Use lsmcontext in security_secid_to_secctx + - SAUCE: Stacking v38: LSM: Use lsmcontext in security_inode_getsecctx + - SAUCE: Stacking v38: Use lsmcontext in security_dentry_init_security + - SAUCE: Stacking v38: LSM: security_secid_to_secctx in netlink netfilter + - SAUCE: Stacking v38: NET: Store LSM netlabel data in a lsmblob + - SAUCE: Stacking v38: binder: Pass LSM identifier for confirmation + - SAUCE: Stacking v38: LSM: security_secid_to_secctx module selection + - SAUCE: Stacking v38: Audit: Keep multiple LSM data in audit_names + - SAUCE: Stacking v38: Audit: Create audit_stamp structure + - SAUCE: Stacking v38: LSM: Add a function to report multiple LSMs + - SAUCE: Stacking v38: Audit: Allow multiple records in an audit_buffer + - SAUCE: Stacking v38: Audit: Add record for multiple task security contexts + - SAUCE: Stacking v38: audit: multiple subject lsm values for netlabel + - SAUCE: Stacking v38: Audit: Add record for multiple object contexts + - SAUCE: Stacking v38: netlabel: Use a struct lsmblob in audit data + - SAUCE: Stacking v38: LSM: Removed scaffolding function lsmcontext_init + - SAUCE: Stacking v38: AppArmor: Remove the exclusive flag + - SAUCE: apparmor: combine common_audit_data and apparmor_audit_data + - SAUCE: apparmor: setup slab cache for audit data + - SAUCE: apparmor: rename audit_data->label to audit_data->subj_label + - SAUCE: apparmor: pass cred through to audit info. + - SAUCE: apparmor: Improve debug print infrastructure + - SAUCE: apparmor: add the ability for profiles to have a learning cache + - SAUCE: apparmor: enable userspace upcall for mediation + - SAUCE: apparmor: cache buffers on percpu list if there is lock contention + - SAUCE: apparmor: fix policy_compat permission remap with extended + permissions + - SAUCE: apparmor: advertise availability of exended perms + - [Config] define CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * kinetic: apply new apparmor and LSM stacking patch set (LP: #1989983) // LSM + stacking and AppArmor refresh for 6.2 kernel (LP: #2012136) + - SAUCE: apparmor: add/use fns to print hash string hex value + - SAUCE: apparmor: patch to provide compatibility with v2.x net rules + - SAUCE: apparmor: add user namespace creation mediation + - SAUCE: apparmor: af_unix mediation + - SAUCE: apparmor: Add fine grained mediation of posix mqueues + + * devlink_port_split from ubuntu_kernel_selftests.net fails on hirsute + (KeyError: 'flavour') (LP: #1937133) + - selftests: net: devlink_port_split.py: skip test if no suitable device + available + + * NFS deathlock with last Kernel 5.4.0-144.161 and 5.15.0-67.74 (LP: #2009325) + - NFS: Correct timing for assigning access cache timestamp + + -- Andrea Righi Sat, 25 Mar 2023 07:37:30 +0100 + +linux (6.2.0-18.18) lunar; urgency=medium + + * lunar/linux: 6.2.0-18.18 -proposed tracker (LP: #2011750) + + * lunar/linux 6.2 fails to boot on arm64 (LP: #2011748) + - SAUCE: Revert "efi: random: fix NULL-deref when refreshing seed" + - SAUCE: Revert "efi: random: refresh non-volatile random seed when RNG is + initialized" + + -- Andrea Righi Wed, 15 Mar 2023 23:54:18 +0100 + +linux (6.2.0-17.17) lunar; urgency=medium + + * lunar/linux: 6.2.0-17.17 -proposed tracker (LP: #2011593) + + * lunar/linux 6.2 fails to boot on ppc64el (LP: #2011413) + - SAUCE: Revert "powerpc: remove STACK_FRAME_OVERHEAD" + - SAUCE: Revert "powerpc/pseries: hvcall stack frame overhead" + + * Speaker / Audio/Mic mute LED don't work on a HP platform (LP: #2011379) + - SAUCE: ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP + platform + + * Some QHD panels fail to refresh when PSR2 enabled (LP: #2009014) + - SAUCE: drm/i915/psr: Use calculated io and fast wake lines + + * Lunar update: v6.2.6 upstream stable release (LP: #2011431) + - tpm: disable hwrng for fTPM on some AMD designs + - wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext" + - staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script + - staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh + - Linux 6.2.6 + + * Lunar update: v6.2.5 upstream stable release (LP: #2011430) + - net/sched: Retire tcindex classifier + - auxdisplay: hd44780: Fix potential memory leak in hd44780_remove() + - fs/jfs: fix shift exponent db_agl2size negative + - driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event() + - f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin + - f2fs: fix to avoid potential deadlock + - objtool: Fix memory leak in create_static_call_sections() + - soc: mediatek: mtk-pm-domains: Allow mt8186 ADSP default power on + - soc: qcom: socinfo: Fix soc_id order + - memory: renesas-rpc-if: Split-off private data from struct rpcif + - memory: renesas-rpc-if: Move resource acquisition to .probe() + - soc: mediatek: mtk-svs: Enable the IRQ later + - pwm: sifive: Always let the first pwm_apply_state succeed + - pwm: stm32-lp: fix the check on arr and cmp registers update + - f2fs: introduce trace_f2fs_replace_atomic_write_block + - f2fs: clear atomic_write_task in f2fs_abort_atomic_write() + - soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail + - soc: mediatek: mtk-svs: reset svs when svs_resume() fail + - soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() + - f2fs: fix to do sanity check on extent cache correctly + - fs: f2fs: initialize fsdata in pagecache_write() + - f2fs: allow set compression option of files without blocks + - f2fs: fix to abort atomic write only during do_exist() + - um: vector: Fix memory leak in vector_config + - ubi: ensure that VID header offset + VID header size <= alloc, size + - ubifs: Fix build errors as symbol undefined + - ubifs: Fix memory leak in ubifs_sysfs_init() + - ubifs: Rectify space budget for ubifs_symlink() if symlink is encrypted + - ubifs: Rectify space budget for ubifs_xrename() + - ubifs: Fix wrong dirty space budget for dirty inode + - ubifs: do_rename: Fix wrong space budget when target inode's nlink > 1 + - ubifs: Reserve one leb for each journal head while doing budget + - ubi: Fix use-after-free when volume resizing failed + - ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume() + - ubifs: Fix memory leak in alloc_wbufs() + - ubi: Fix possible null-ptr-deref in ubi_free_volume() + - ubifs: Re-statistic cleaned znode count if commit failed + - ubifs: dirty_cow_znode: Fix memleak in error handling path + - ubifs: ubifs_writepage: Mark page dirty after writing inode failed + - ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process + - ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling + fastmap + - ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show() + - ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed + - f2fs: fix to handle F2FS_IOC_START_ATOMIC_REPLACE in f2fs_compat_ioctl() + - f2fs: fix to avoid potential memory corruption in __update_iostat_latency() + - f2fs: fix to update age extent correctly during truncation + - f2fs: fix to update age extent in f2fs_do_zero_range() + - soc: qcom: stats: Populate all subsystem debugfs files + - f2fs: introduce IS_F2FS_IPU_* macro + - f2fs: fix to set ipu policy + - ext4: use ext4_fc_tl_mem in fast-commit replay path + - ext4: don't show commit interval if it is zero + - netfilter: nf_tables: allow to fetch set elements when table has an owner + - x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list + - um: virtio_uml: free command if adding to virtqueue failed + - um: virtio_uml: mark device as unregistered when breaking it + - um: virtio_uml: move device breaking into workqueue + - um: virt-pci: properly remove PCI device from bus + - f2fs: synchronize atomic write aborts + - watchdog: rzg2l_wdt: Issue a reset before we put the PM clocks + - watchdog: rzg2l_wdt: Handle TYPE-B reset for RZ/V2M + - watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in + error path + - watchdog: Fix kmemleak in watchdog_cdev_register + - watchdog: pcwd_usb: Fix attempting to access uninitialized memory + - watchdog: sbsa_wdog: Make sure the timeout programming is within the limits + - netfilter: ctnetlink: fix possible refcount leak in + ctnetlink_create_conntrack() + - netfilter: conntrack: fix rmmod double-free race + - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces + - netfilter: ebtables: fix table blob use-after-free + - netfilter: xt_length: use skb len to match in length_mt6 + - netfilter: ctnetlink: make event listener tracking global + - netfilter: x_tables: fix percpu counter block leak on error path when + creating new netns + - swiotlb: mark swiotlb_memblock_alloc() as __init + - ptp: vclock: use mutex to fix "sleep on atomic" bug + - drm/i915: move a Kconfig symbol to unbreak the menu presentation + - ipv6: Add lwtunnel encap size of all siblings in nexthop calculation + - drm/i915/xelpmp: Consider GSI offset when doing MCR lookups + - octeontx2-pf: Recalculate UDP checksum for ptp 1-step sync packet + - net: sunhme: Fix region request + - sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop + - octeontx2-pf: Use correct struct reference in test condition + - net: fix __dev_kfree_skb_any() vs drop monitor + - 9p/xen: fix version parsing + - 9p/xen: fix connection sequence + - 9p/rdma: unmap receive dma buffer in rdma_request()/post_recv() + - spi: tegra210-quad: Fix validate combined sequence + - mlx5: fix skb leak while fifo resync and push + - mlx5: fix possible ptp queue fifo use-after-free + - net/mlx5: ECPF, wait for VF pages only after disabling host PFs + - net/mlx5e: Verify flow_source cap before using it + - net/mlx5: Geneve, Fix handling of Geneve object id as error code + - ext4: fix incorrect options show of original mount_opt and extend mount_opt2 + - nfc: fix memory leak of se_io context in nfc_genl_se_io + - net/sched: transition act_pedit to rcu and percpu stats + - net/sched: act_pedit: fix action bind logic + - net/sched: act_mpls: fix action bind logic + - net/sched: act_sample: fix action bind logic + - net: dsa: seville: ignore mscc-miim read errors from Lynx PCS + - net: dsa: felix: fix internal MDIO controller resource length + - ARM: dts: aspeed: p10bmc: Update battery node name + - ARM: dts: spear320-hmi: correct STMPE GPIO compatible + - tcp: tcp_check_req() can be called from process context + - vc_screen: modify vcs_size() handling in vcs_read() + - spi: tegra210-quad: Fix iterator outside loop + - rtc: sun6i: Always export the internal oscillator + - genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() + - scsi: ipr: Work around fortify-string warning + - scsi: mpi3mr: Fix an issue found by KASAN + - scsi: mpi3mr: Use number of bits to manage bitmap sizes + - rtc: allow rtc_read_alarm without read_alarm callback + - io_uring: fix size calculation when registering buf ring + - loop: loop_set_status_from_info() check before assignment + - ASoC: adau7118: don't disable regulators on device unbind + - ASoC: apple: mca: Fix final status read on SERDES reset + - ASoC: apple: mca: Fix SERDES reset sequence + - ASoC: apple: mca: Improve handling of unavailable DMA channels + - nvme: bring back auto-removal of deleted namespaces during sequential scan + - nvme-tcp: don't access released socket during error recovery + - nvme-fabrics: show well known discovery name + - ASoC: zl38060 add gpiolib dependency + - ASoC: mediatek: mt8195: add missing initialization + - thermal: intel: quark_dts: fix error pointer dereference + - thermal: intel: BXT_PMIC: select REGMAP instead of depending on it + - cpufreq: apple-soc: Fix an IS_ERR() vs NULL check + - tracing: Add NULL checks for buffer in ring_buffer_free_read_page() + - kernel/printk/index.c: fix memory leak with using debugfs_lookup() + - firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3 + - bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC + support + - mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak + - IB/hfi1: Update RMT size calculation + - iommu: Remove deferred attach check from __iommu_detach_device() + - PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3() + - media: uvcvideo: Remove format descriptions + - media: uvcvideo: Handle cameras with invalid descriptors + - media: uvcvideo: Handle errors from calls to usb_string + - media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910 + - media: uvcvideo: Silence memcpy() run-time false positive warnings + - USB: fix memory leak with using debugfs_lookup() + - cacheinfo: Fix shared_cpu_map to handle shared caches at different levels + - usb: fotg210: List different variants + - dt-bindings: usb: Add device id for Genesys Logic hub controller + - staging: emxx_udc: Add checks for dma_alloc_coherent() + - tty: fix out-of-bounds access in tty_driver_lookup_tty() + - tty: serial: fsl_lpuart: disable the CTS when send break signal + - serial: sc16is7xx: setup GPIO controller later in probe + - mei: bus-fixup:upon error print return values of send and receive + - tools/iio/iio_utils:fix memory leak + - bus: mhi: ep: Fix the debug message for MHI_PKT_TYPE_RESET_CHAN_CMD cmd + - iio: accel: mma9551_core: Prevent uninitialized variable in + mma9551_read_status_word() + - iio: accel: mma9551_core: Prevent uninitialized variable in + mma9551_read_config_word() + - media: uvcvideo: Add GUID for BGRA/X 8:8:8:8 + - soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe() + - PCI/portdrv: Prevent LS7A Bus Master clearing on shutdown + - PCI: loongson: Prevent LS7A MRRS increases + - staging: pi433: fix memory leak with using debugfs_lookup() + - USB: dwc3: fix memory leak with using debugfs_lookup() + - USB: chipidea: fix memory leak with using debugfs_lookup() + - USB: ULPI: fix memory leak with using debugfs_lookup() + - USB: uhci: fix memory leak with using debugfs_lookup() + - USB: sl811: fix memory leak with using debugfs_lookup() + - USB: fotg210: fix memory leak with using debugfs_lookup() + - USB: isp116x: fix memory leak with using debugfs_lookup() + - USB: isp1362: fix memory leak with using debugfs_lookup() + - USB: gadget: gr_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: bcm63xx_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: pxa27x_udc: fix memory leak with using debugfs_lookup() + - usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer + math + - USB: ene_usb6250: Allocate enough memory for full object + - usb: uvc: Enumerate valid values for color matching + - usb: gadget: uvc: Make bSourceID read/write + - PCI: Align extra resources for hotplug bridges properly + - PCI: Take other bus devices into account when distributing resources + - PCI: Distribute available resources for root buses, too + - tty: pcn_uart: fix memory leak with using debugfs_lookup() + - misc: vmw_balloon: fix memory leak with using debugfs_lookup() + - drivers: base: component: fix memory leak with using debugfs_lookup() + - drivers: base: dd: fix memory leak with using debugfs_lookup() + - kernel/fail_function: fix memory leak with using debugfs_lookup() + - PCI: loongson: Add more devices that need MRRS quirk + - PCI: Add ACS quirk for Wangxun NICs + - PCI: pciehp: Add Qualcomm quirk for Command Completed erratum + - phy: rockchip-typec: Fix unsigned comparison with less than zero + - RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size + - soundwire: cadence: Remove wasted space in response_buf + - soundwire: cadence: Drain the RX FIFO after an IO timeout + - eth: fealnx: bring back this old driver + - net: tls: avoid hanging tasks on the tx_lock + - x86/resctl: fix scheduler confusion with 'current' + - vDPA/ifcvf: decouple hw features manipulators from the adapter + - vDPA/ifcvf: decouple config space ops from the adapter + - vDPA/ifcvf: alloc the mgmt_dev before the adapter + - vDPA/ifcvf: decouple vq IRQ releasers from the adapter + - vDPA/ifcvf: decouple config IRQ releaser from the adapter + - vDPA/ifcvf: decouple vq irq requester from the adapter + - vDPA/ifcvf: decouple config/dev IRQ requester and vectors allocator from the + adapter + - vDPA/ifcvf: ifcvf_request_irq works on ifcvf_hw + - vDPA/ifcvf: manage ifcvf_hw in the mgmt_dev + - vDPA/ifcvf: allocate the adapter in dev_add() + - drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state() + - drm/display/dp_mst: Fix down/up message handling after sink disconnect + - drm/display/dp_mst: Fix down message handling after a packet reception error + - drm/display/dp_mst: Fix payload addition on a disconnected sink + - drm/i915/dp_mst: Add the MST topology state for modesetted CRTCs + - drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload() + - drm/i915/dp_mst: Fix payload removal during output disabling + - drm/i915: Fix system suspend without fbdev being initialized + - media: uvcvideo: Fix race condition with usb_kill_urb + - arm64: efi: Make efi_rt_lock a raw_spinlock + - usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails + - Linux 6.2.5 + + * Lunar update: v6.2.4 upstream stable release (LP: #2011428) + - Revert "blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and + blkcg_deactivate_policy()" + - Revert "blk-cgroup: dropping parent refcount after pd_free_fn() is done" + - Linux 6.2.4 + + * Lunar update: v6.2.3 upstream stable release (LP: #2011425) + - HID: asus: use spinlock to protect concurrent accesses + - HID: asus: use spinlock to safely schedule workers + - iommu/amd: Fix error handling for pdev_pri_ats_enable() + - iommu/amd: Skip attach device domain is same as new domain + - iommu/amd: Improve page fault error reporting + - iommu: Attach device group to old domain in error path + - powerpc/mm: Rearrange if-else block to avoid clang warning + - ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller" + - ARM: OMAP2+: Fix memory leak in realtime_counter_init() + - arm64: dts: qcom: qcs404: use symbol names for PCIe resets + - arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up + - arm64: dts: qcom: sm6115: Fix UFS node + - arm64: dts: qcom: sm6115: Provide xo clk to rpmcc + - arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k + - arm64: dts: qcom: pmi8950: Correct rev_1250v channel label to mv + - arm64: dts: qcom: sm6350: Fix up the ramoops node + - arm64: dts: qcom: sdm670-google-sargo: keep pm660 ldo8 on + - arm64: dts: qcom: Re-enable resin on MSM8998 and SDM845 boards + - arm64: dts: qcom: sm8350-sagami: Configure SLG51000 PMIC on PDX215 + - arm64: dts: qcom: sm8350-sagami: Add GPIO line names for PMIC GPIOs + - arm64: dts: qcom: sm8350-sagami: Rectify GPIO keys + - arm64: dts: qcom: sm6350-lena: Flatten gpio-keys pinctrl state + - arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings + - arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down) + - arm64: dts: imx8m: Align SoC unique ID node unit address + - ARM: zynq: Fix refcount leak in zynq_early_slcr_init + - fs: dlm: fix return value check in dlm_memory_init() + - arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY + - arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description + - arm64: dts: mediatek: mt8192: Fix systimer 13 MHz clock description + - arm64: dts: mediatek: mt8195: Fix systimer 13 MHz clock description + - arm64: dts: mediatek: mt8186: Fix systimer 13 MHz clock description + - arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name + - arm64: dts: qcom: sdm845-xiaomi-beryllium: fix audio codec interrupt pin + name + - x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC + - arm64: dts: qcom: sc7180: correct SPMI bus address cells + - arm64: dts: qcom: sc7280: correct SPMI bus address cells + - arm64: dts: qcom: sc8280xp: correct SPMI bus address cells + - arm64: dts: qcom: sm8450: correct Soundwire wakeup interrupt name + - arm64: dts: qcom: sdm845: make DP node follow the schema + - arm64: dts: qcom: msm8996-oneplus-common: drop vdda-supply from DSI PHY + - arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers + - arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node + - arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name + - arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names + - arm64: dts: meson-gx: Fix Ethernet MAC address unit name + - arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name + - arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address + - cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* + - arm64: dts: ti: k3-am62-main: Fix clocks for McSPI + - arm64: tegra: Fix duplicate regulator on Jetson TX1 + - arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size + - arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem + - arm64: dts: qcom: msm8956: use SoC-specific compat for tsens + - arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names + - arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY + - arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY + - arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges + - arm64: dts: qcom: ipq8074: fix Gen3 PCIe node + - arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names + - arm64: dts: meson: remove CPU opps below 1GHz for G12A boards + - ARM: OMAP1: call platform_device_put() in error case in + omap1_dm_timer_init() + - arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken + - ARM: bcm2835_defconfig: Enable the framebuffer + - ARM: s3c: fix s3c64xx_set_timer_source prototype + - arm64: dts: ti: k3-j7200: Fix wakeup pinmux range + - ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato + - ARM: imx: Call ida_simple_remove() for ida_simple_get + - arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name + - arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name + - arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible + - arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB + controller node + - arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names + property + - arm64: dts: amlogic: meson-gx: add missing unit address to rng node name + - arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc + node name + - arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node + name + - arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node + name + - arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name + - arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names + - arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name + - arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name + - arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties + - arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip + - locking/rwsem: Disable preemption in all down_read*() and up_read() code + paths + - arm64: tegra: Mark host1x as dma-coherent on Tegra194/234 + - arm64: dts: renesas: beacon-renesom: Fix gpio expander reference + - arm64: dts: meson: radxa-zero: allow usb otg mode + - arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN + - ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference + - ublk_drv: remove nr_aborted_queues from ublk_device + - ublk_drv: don't probe partitions if the ubq daemon isn't trusted + - ARM: dts: imx7s: correct iomuxc gpr mux controller cells + - sbitmap: remove redundant check in __sbitmap_queue_get_batch + - sbitmap: correct wake_batch recalculation to avoid potential IO hung + - arm64: dts: mt8195: Fix CPU map for single-cluster SoC + - arm64: dts: mt8192: Fix CPU map for single-cluster SoC + - arm64: dts: mt8186: Fix CPU map for single-cluster SoC + - arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node + - arm64: dts: mediatek: mt8186: Fix watchdog compatible + - arm64: dts: mediatek: mt8195: Fix watchdog compatible + - arm64: dts: mediatek: mt7986: Fix watchdog compatible + - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 + - arm64: dts: qcom: sm8450-nagara: Correct firmware paths + - blk-mq: avoid sleep in blk_mq_alloc_request_hctx + - blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx + - blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait + - blk-mq: Fix potential io hung for shared sbitmap per tagset + - blk-mq: correct stale comment of .get_budget + - arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input + - arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC + - arm64: dts: qcom: sm8350: drop incorrect cells from serial + - arm64: dts: qcom: sm8450: drop incorrect cells from serial + - arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM + and MPSS memory regions + - arm64: dts: qcom: msm8953: correct TLMM gpio-ranges + - arm64: dts: qcom: sm6115: correct TLMM gpio-ranges + - arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators + - s390/dasd: Fix potential memleak in dasd_eckd_init() + - io_uring,audit: don't log IORING_OP_MADVISE + - sched/rt: pick_next_rt_entity(): check list_entry + - perf/x86/intel/ds: Fix the conversion from TSC to perf time + - x86/perf/zhaoxin: Add stepping check for ZXC + - KEYS: asymmetric: Fix ECDSA use via keyctl uapi + - block: ublk: check IO buffer based on flag need_get_data + - arm64: dts: qcom: pmk8350: Use the correct PON compatible + - erofs: relinquish volume with mutex held + - block: sync mixed merged request's failfast with 1st bio's + - block: Fix io statistics for cgroup in throttle path + - block: bio-integrity: Copy flags when bio_integrity_payload is cloned + - block: use proper return value from bio_failfast() + - wifi: mt76: mt7915: add missing of_node_put() + - wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host + - wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks + - wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown() + - wifi: mt76: mt7996: fix insecure data handling of + mt7996_mcu_rx_radar_detected() + - wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set() + - wifi: mt76: mt7915: check return value before accessing free_block_num + - wifi: mt76: mt7996: check return value before accessing free_block_num + - wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() + - wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr() + - wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv + - wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power + - wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read() + - wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() + - wifi: mt76: fix coverity uninit_use_in_call in + mt76_connac2_reverse_frag0_hdr_trans() + - wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() + - wifi: rsi: Fix memory leak in rsi_coex_attach() + - wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave() + - wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave() + - wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave() + - wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave() + - wifi: libertas: fix memory leak in lbs_init_adapter() + - wifi: rtl8xxxu: Fix assignment to bit field priv->pi_enabled + - wifi: rtl8xxxu: Fix assignment to bit field priv->cck_agc_report_type + - wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave() + - wifi: rtw89: 8852c: rfk: correct DACK setting + - wifi: rtw89: 8852c: rfk: correct DPK settings + - wifi: rtlwifi: Fix global-out-of-bounds bug in + _rtl8812ae_phy_set_txpower_limit() + - libbpf: Fix single-line struct definition output in btf_dump + - libbpf: Fix btf__align_of() by taking into account field offsets + - wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave() + - wifi: ipw2200: fix memory leak in ipw_wdev_init() + - wifi: wilc1000: fix potential memory leak in wilc_mac_xmit() + - wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() + - wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() + - wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid() + - wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave() + - wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave() + - wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave() + - wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave() + - wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave() + - libbpf: Fix invalid return address register in s390 + - crypto: x86/ghash - fix unaligned access in ghash_setkey() + - crypto: ux500 - update debug config after ux500 cryp driver removal + - ACPICA: Drop port I/O validation for some regions + - genirq: Fix the return type of kstat_cpu_irqs_sum() + - rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose + - rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls + - rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes() + - lib/mpi: Fix buffer overrun when SG is too long + - crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2 + - platform/chrome: cros_ec_typec: Update port DP VDO + - ACPICA: nsrepair: handle cases without a return value correctly + - libbpf: Fix map creation flags sanitization + - bpf_doc: Fix build error with older python versions + - selftests/xsk: print correct payload for packet dump + - selftests/xsk: print correct error codes when exiting + - arm64/cpufeature: Fix field sign for DIT hwcap detection + - arm64/sysreg: Fix errors in 32 bit enumeration values + - kselftest/arm64: Fix syscall-abi for systems without 128 bit SME + - workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex + - s390/early: fix sclp_early_sccb variable lifetime + - s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue() + - x86/signal: Fix the value returned by strict_sas_size() + - thermal/drivers/tsens: Drop msm8976-specific defines + - thermal/drivers/tsens: Sort out msm8976 vs msm8956 data + - thermal/drivers/tsens: fix slope values for msm8939 + - thermal/drivers/tsens: limit num_sensors to 9 for msm8939 + - wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() + - wifi: rtw89: Add missing check for alloc_workqueue + - wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU + - wifi: orinoco: check return value of hermes_write_wordrec() + - wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter() + - wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update() + - thermal/drivers/imx_sc_thermal: Fix the loop condition + - wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback + function + - wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails + - wifi: ath9k: Fix potential stack-out-of-bounds write in + ath9k_wmi_rsp_callback() + - wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup + - wifi: cfg80211: Fix extended KCK key length check in + nl80211_set_rekey_data() + - ACPI: battery: Fix missing NUL-termination with large strings + - selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m + - crypto: ccp - Failure on re-initialization due to duplicate sysfs filename + - crypto: essiv - Handle EBUSY correctly + - crypto: seqiv - Handle EBUSY correctly + - powercap: fix possible name leak in powercap_register_zone() + - bpf: Fix state pruning for STACK_DYNPTR stack slots + - bpf: Fix missing var_off check for ARG_PTR_TO_DYNPTR + - bpf: Fix partial dynptr stack slot reads/writes + - x86/microcode: Add a parameter to microcode_check() to store CPU + capabilities + - x86/microcode: Check CPU capabilities after late microcode update correctly + - x86/microcode: Adjust late loading result reporting message + - net: ethernet: ti: am65-cpsw/cpts: Fix CPTS release action + - selftests/bpf: Fix vmtest static compilation error + - crypto: xts - Handle EBUSY correctly + - leds: led-class: Add missing put_device() to led_put() + - drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size + - s390/bpf: Add expoline to tail calls + - wifi: iwlwifi: mei: fix compilation errors in rfkill() + - kselftest/arm64: Fix enumeration of systems without 128 bit SME + - can: rcar_canfd: Fix R-Car V3U CAN mode selection + - can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses + - selftests/bpf: Initialize tc in xdp_synproxy + - crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware + - bpftool: profile online CPUs instead of possible + - wifi: mt76: mt7921: fix deadlock in mt7921_abort_roc + - wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after + init_work + - wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttling + - wifi: mt76: mt7915: rework mt7915_thermal_temp_store() + - wifi: mt76: mt7921: fix channel switch fail in monitor mode + - wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna() + - wifi: mt76: mt7996: update register for CFEND_RATE + - wifi: mt76: connac: fix POWER_CTRL command name typo + - wifi: mt76: mt7921: fix invalid remain_on_channel duration + - wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit + - wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit + - wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup + - wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_trans + - wifi: mt76: mt7915: fix WED TxS reporting + - wifi: mt76: add memory barrier to SDIO queue kick + - wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val + - net/mlx5: Enhance debug print in page allocation failure + - irqchip: Fix refcount leak in platform_irqchip_probe + - irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains + - irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe + - irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe + - s390/mem_detect: fix detect_memory() error handling + - s390/vmem: fix empty page tables cleanup under KASAN + - s390/boot: cleanup decompressor header files + - s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails + - s390/boot: fix mem_detect extended area allocation + - net: add sock_init_data_uid() + - tun: tun_chr_open(): correctly initialize socket uid + - tap: tap_open(): correctly initialize socket uid + - rxrpc: Fix overwaking on call poking + - OPP: fix error checking in opp_migrate_dentry() + - cpufreq: davinci: Fix clk use after free + - Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds + - Bluetooth: L2CAP: Fix potential user-after-free + - Bluetooth: hci_qca: get wakeup status from serdev device handle + - net: ipa: generic command param fix + - s390: vfio-ap: tighten the NIB validity check + - s390/ap: fix status returned by ap_aqic() + - s390/ap: fix status returned by ap_qact() + - libbpf: Fix alen calculation in libbpf_nla_dump_errormsg() + - xen/grant-dma-iommu: Implement a dummy probe_device() callback + - rds: rds_rm_zerocopy_callback() correct order for list_add_tail() + - crypto: rsa-pkcs1pad - Use akcipher_request_complete + - m68k: /proc/hardware should depend on PROC_FS + - RISC-V: time: initialize hrtimer based broadcast clock event device + - clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first + use + - wifi: iwl3945: Add missing check for create_singlethread_workqueue + - wifi: iwl4965: Add missing check for create_singlethread_workqueue() + - wifi: brcmfmac: Rename Cypress 89459 to BCM4355 + - wifi: brcmfmac: pcie: Add IDs/properties for BCM4355 + - wifi: brcmfmac: pcie: Add IDs/properties for BCM4377 + - wifi: brcmfmac: pcie: Perform correct BCM4364 firmware selection + - wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize() + - wifi: rtw89: fix parsing offset for MCC C2H + - selftests/bpf: Fix out-of-srctree build + - ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models + - ACPI: resource: Do IRQ override on all TongFang GMxRGxx + - crypto: octeontx2 - Fix objects shared between several modules + - crypto: crypto4xx - Call dma_unmap_page when done + - vfio/ccw: remove WARN_ON during shutdown + - wifi: mac80211: move color collision detection report in a delayed work + - wifi: mac80211: make rate u32 in sta_set_rate_info_rx() + - wifi: mac80211: fix non-MLO station association + - wifi: mac80211: Don't translate MLD addresses for multicast + - wifi: mac80211: avoid u32_encode_bits() warning + - wifi: mac80211: fix off-by-one link setting + - tools/lib/thermal: Fix thermal_sampling_exit() + - thermal/drivers/hisi: Drop second sensor hi3660 + - selftests/bpf: Fix map_kptr test. + - wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta() + - bpf: Zeroing allocated object from slab in bpf memory allocator + - selftests/bpf: Fix xdp_do_redirect on s390x + - can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a + bus error + - can: esd_usb: Make use of can_change_state() and relocate checking skb for + NULL + - xsk: check IFF_UP earlier in Tx path + - LoongArch, bpf: Use 4 instructions for function address in JIT + - bpf: Fix global subprog context argument resolution logic + - irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts + - irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts + - net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link() + - net/smc: fix application data exception + - selftests/net: Interpret UDP_GRO cmsg data as an int value + - l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() + - net: bcmgenet: fix MoCA LED control + - net: lan966x: Fix possible deadlock inside PTP + - net/mlx4_en: Introduce flexible array to silence overflow warning + - net/mlx5e: Align IPsec ASO result memory to be as required by hardware + - selftest: fib_tests: Always cleanup before exit + - sefltests: netdevsim: wait for devlink instance after netns removal + - drm: Fix potential null-ptr-deref due to drmm_mode_config_init() + - drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats + - drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec + - drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC + - drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC + - drm/bridge: megachips: Fix error handling in i2c_register_driver() + - drm/vkms: Fix memory leak in vkms_init() + - drm/vkms: Fix null-ptr-deref in vkms_release() + - drm/modes: Use strscpy() to copy command-line mode name + - drm/vc4: dpi: Fix format mapping for RGB565 + - drm/bridge: it6505: Guard bridge power in IRQ handler + - drm: tidss: Fix pixel format definition + - gpu: ipu-v3: common: Add of_node_put() for reference returned by + of_graph_get_port_by_id() + - drm/ast: Init iosys_map pointer as I/O memory for damage handling + - drm/vc4: drop all currently held locks if deadlock happens + - hwmon: (ftsteutates) Fix scaling of measurements + - drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() + - drm/msm/hdmi: Add missing check for alloc_ordered_workqueue + - pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins + - pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain + - pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups + - drm/vc4: hvs: Configure the HVS COB allocations + - drm/vc4: hvs: Set AXI panic modes + - drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4 + - drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5 + - drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5 + - drm/vc4: hdmi: Correct interlaced timings again + - drm/msm: clean event_thread->worker in case of an error + - drm/panel-edp: fix name for IVO product id 854b + - scsi: qla2xxx: Fix exchange oversubscription + - scsi: qla2xxx: Fix exchange oversubscription for management commands + - scsi: qla2xxx: edif: Fix clang warning + - ASoC: fsl_sai: initialize is_dsp_mode flag + - drm/bridge: tc358767: Set default CLRSIPO count + - drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() + - ALSA: hda/ca0132: minor fix for allocation size + - drm/amdgpu: Use the sched from entity for amdgpu_cs trace + - drm/msm/gem: Add check for kmalloc + - drm/msm/dpu: Disallow unallocated resources to be returned + - drm/bridge: lt9611: fix sleep mode setup + - drm/bridge: lt9611: fix HPD reenablement + - drm/bridge: lt9611: fix polarity programming + - drm/bridge: lt9611: fix programming of video modes + - drm/bridge: lt9611: fix clock calculation + - drm/bridge: lt9611: pass a pointer to the of node + - regulator: tps65219: use IS_ERR() to detect an error pointer + - drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness + - drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags + - drm/msm/dsi: Allow 2 CTRLs on v2.5.0 + - scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 + - drm/msm/dpu: sc7180: add missing WB2 clock control + - drm/msm: use strscpy instead of strncpy + - drm/msm/dpu: Add check for cstate + - drm/msm/dpu: Add check for pstates + - drm/msm/mdp5: Add check for kzalloc + - habanalabs: bugs fixes in timestamps buff alloc + - pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback() + - pinctrl: mediatek: Initialize variable pullen and pullup to zero + - pinctrl: mediatek: Initialize variable *buf to zero + - gpu: host1x: Fix mask for syncpoint increment register + - gpu: host1x: Don't skip assigning syncpoints to channels + - drm/tegra: firewall: Check for is_addr_reg existence in IMM check + - drm/i915/mtl: Add initial gt workarounds + - drm/i915/xehp: GAM registers don't need to be re-applied on engine resets + - pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts + - drm/i915/xehp: Annotate a couple more workaround registers as MCR + - drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update() + - drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd + - drm/mediatek: Use NULL instead of 0 for NULL pointer + - drm/mediatek: Drop unbalanced obj unref + - drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc + - drm/mediatek: Clean dangling pointer on bind error path + - ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress() + - dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp- + ccorr + - gpio: pca9570: rename platform_data to chip_data + - gpio: vf610: connect GPIO label to dev name + - ASoC: topology: Properly access value coming from topology file + - spi: dw_bt1: fix MUX_MMIO dependencies + - ASoC: mchp-spdifrx: fix controls which rely on rsr register + - ASoC: mchp-spdifrx: fix return value in case completion times out + - ASoC: mchp-spdifrx: fix controls that works with completion mechanism + - ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove() + - dm: improve shrinker debug names + - regmap: apply reg_base and reg_downshift for single register ops + - accel: fix CONFIG_DRM dependencies + - ASoC: rsnd: fixup #endif position + - ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params() + - ASoC: dt-bindings: meson: fix gx-card codec node regex + - regulator: tps65219: use generic set_bypass() + - hwmon: (asus-ec-sensors) add missing mutex path + - hwmon: (ltc2945) Handle error case in ltc2945_value_store + - ALSA: hda: Fix the control element identification for multiple codecs + - drm/amdgpu: fix enum odm_combine_mode mismatch + - scsi: mpt3sas: Fix a memory leak + - scsi: aic94xx: Add missing check for dma_map_single() + - HID: multitouch: Add quirks for flipped axes + - HID: retain initial quirks set up when creating HID devices + - ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared + - ASoC: qcom: q6apm-dai: fix race condition while updating the position + pointer + - ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag + - ASoC: codecs: lpass: register mclk after runtime pm + - ASoC: codecs: lpass: fix incorrect mclk rate + - drm/amd/display: don't call dc_interrupt_set() for disabled crtcs + - HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support + - spi: bcm63xx-hsspi: Fix multi-bit mode setting + - hwmon: (mlxreg-fan) Return zero speed for broken fan + - ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init + - dm: remove flush_scheduled_work() during local_exit() + - nfs4trace: fix state manager flag printing + - NFS: fix disabling of swap + - drm/i915/pvc: Implement recommended caching policy + - drm/i915/pvc: Annotate two more workaround/tuning registers as MCR + - drm/i915: Fix GEN8_MISCCPCTL + - spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() + - ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared + - HID: bigben: use spinlock to protect concurrent accesses + - HID: bigben_worker() remove unneeded check on report_field + - HID: bigben: use spinlock to safely schedule workers + - hid: bigben_probe(): validate report count + - ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks + - drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() + - NFSD: enhance inter-server copy cleanup + - NFSD: fix leaked reference count of nfsd4_ssc_umount_item + - nfsd: fix race to check ls_layouts + - nfsd: clean up potential nfsd_file refcount leaks in COPY codepath + - NFSD: fix problems with cleanup on errors in nfsd4_copy + - nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open + - nfsd: don't fsync nfsd_files on last close + - NFSD: copy the whole verifier in nfsd_copy_write_verifier + - cifs: Fix lost destroy smbd connection when MR allocate failed + - cifs: Fix warning and UAF when destroy the MR list + - cifs: use tcon allocation functions even for dummy tcon + - gfs2: jdata writepage fix + - perf llvm: Fix inadvertent file creation + - leds: led-core: Fix refcount leak in of_led_get() + - leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest() + - leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver + - tools/tracing/rtla: osnoise_hist: use total duration for average calculation + - perf inject: Use perf_data__read() for auxtrace + - perf intel-pt: Do not try to queue auxtrace data on pipe + - perf stat: Hide invalid uncore event output for aggr mode + - perf jevents: Correct bad character encoding + - perf test bpf: Skip test if kernel-debuginfo is not present + - perf tools: Fix auto-complete on aarch64 + - perf stat: Avoid merging/aggregating metric counts twice + - sparc: allow PM configs for sparc32 COMPILE_TEST + - selftests: find echo binary to use -ne options + - selftests/ftrace: Fix bash specific "==" operator + - selftests: use printf instead of echo -ne + - perf record: Fix segfault with --overwrite and --max-size + - printf: fix errname.c list + - perf tests stat_all_metrics: Change true workload to sleep workload for + system wide check + - objtool: add UACCESS exceptions for __tsan_volatile_read/write + - selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols + - sysctl: fix proc_dobool() usability + - mfd: rk808: Re-add rk808-clkout to RK818 + - mfd: cs5535: Don't build on UML + - mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() + - dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0 + - RDMA/erdma: Fix refcount leak in erdma_mmap + - dmaengine: HISI_DMA should depend on ARCH_HISI + - RDMA/hns: Fix refcount leak in hns_roce_mmap + - iio: light: tsl2563: Do not hardcode interrupt trigger type + - usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe() + - i2c: designware: fix i2c_dw_clk_rate() return size to be u32 + - i2c: qcom-geni: change i2c_master_hub to static + - soundwire: cadence: Don't overflow the command FIFOs + - driver core: fix potential null-ptr-deref in device_add() + - kobject: Fix slab-out-of-bounds in fill_kobj_path() + - alpha/boot/tools/objstrip: fix the check for ELF header + - media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() + - media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU + - media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX + - media: uvcvideo: Refactor power_line_frequency_controls_limited + - coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR + - coresight: cti: Prevent negative values of enable count + - coresight: cti: Add PM runtime call in enable_store + - usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count + - PCI/IOV: Enlarge virtfn sysfs name buffer + - PCI: switchtec: Return -EFAULT for copy_to_user() errors + - PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc + - hwtracing: hisi_ptt: Only add the supported devices to the filters list + - tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() + - tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown() + - serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init() + - Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in + set_protocol" + - eeprom: idt_89hpesx: Fix error handling in idt_init() + - applicom: Fix PCI device refcount leak in applicom_init() + - firmware: stratix10-svc: add missing gen_pool_destroy() in + stratix10_svc_drv_probe() + - firmware: stratix10-svc: fix error handle while alloc/add device failed + - VMCI: check context->notify_page after call to get_user_pages_fast() to + avoid GPF + - mei: pxp: Use correct macros to initialize uuid_le + - misc/mei/hdcp: Use correct macros to initialize uuid_le + - misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe() + - iommu/exynos: Fix error handling in exynos_iommu_init() + - driver core: fix resource leak in device_add() + - driver core: location: Free struct acpi_pld_info *pld before return false + - drivers: base: transport_class: fix possible memory leak + - drivers: base: transport_class: fix resource leak when + transport_add_device() fails + - firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle + - selftests: iommu: Fix test_cmd_destroy_access() call in user_copy + - iommufd: Add three missing structures in ucmd_buffer + - fotg210-udc: Add missing completion handler + - dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers + - fpga: microchip-spi: move SPI I/O buffers out of stack + - fpga: microchip-spi: rewrite status polling in a time measurable way + - usb: early: xhci-dbc: Fix a potential out-of-bound memory access + - tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case + - RDMA/cxgb4: add null-ptr-check after ip_dev_find() + - usb: musb: mediatek: don't unregister something that wasn't registered + - usb: gadget: configfs: Restrict symlink creation is UDC already binded + - phy: mediatek: remove temporary variable @mask_ + - PCI: mt7621: Delay phy ports initialization + - iommu/vt-d: Set No Execute Enable bit in PASID table entry + - power: supply: remove faulty cooling logic + - RDMA/siw: Fix user page pinning accounting + - RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() + - usb: max-3421: Fix setting of I/O pins + - RDMA/irdma: Cap MSIX used to online CPUs + 1 + - serial: fsl_lpuart: fix RS485 RTS polariy inverse issue + - tty: serial: imx: disable Ageing Timer interrupt request irq + - driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links + - driver core: fw_devlink: Don't purge child fwnode's consumer links + - driver core: fw_devlink: Allow marking a fwnode link as being part of a + cycle + - driver core: fw_devlink: Consolidate device link flag computation + - driver core: fw_devlink: Improve check for fwnode with no device/driver + - driver core: fw_devlink: Make cycle detection more robust + - mtd: mtdpart: Don't create platform device that'll never probe + - usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev + - dmaengine: dw-edma: Fix readq_ch() return value truncation + - PCI: Fix dropping valid root bus resources with .end = zero + - phy: rockchip-typec: fix tcphy_get_mode error case + - PCI: qcom: Fix host-init error handling + - iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() + - iommu: Fix error unwind in iommu_group_alloc() + - iommu/amd: Do not identity map v2 capable device when snp is enabled + - dmaengine: sf-pdma: pdma_desc memory leak fix + - dmaengine: dw-axi-dmac: Do not dereference NULL structure + - dmaengine: ptdma: check for null desc before calling pt_cmd_callback + - iommu/vt-d: Fix error handling in sva enable/disable paths + - iommu/vt-d: Allow to use flush-queue when first level is default + - RDMA/rxe: Cleanup mr_check_range + - RDMA/rxe: Move rxe_map_mr_sg to rxe_mr.c + - RDMA-rxe: Isolate mr code from atomic_reply() + - RDMA-rxe: Isolate mr code from atomic_write_reply() + - RDMA/rxe: Cleanup page variables in rxe_mr.c + - RDMA/rxe: Replace rxe_map and rxe_phys_buf by xarray + - Subject: RDMA/rxe: Handle zero length rdma + - RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering + memory on first packet + - RDMA/rxe: Fix missing memory barriers in rxe_queue.h + - IB/hfi1: Fix math bugs in hfi1_can_pin_pages() + - IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors + - Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after + use" + - remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers + - media: ti: cal: fix possible memory leak in cal_ctx_create() + - media: platform: ti: Add missing check for devm_regulator_get + - media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in + imx7_csi_init() + - powerpc: Remove linker flag from KBUILD_AFLAGS + - s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64 + - builddeb: clean generated package content + - media: max9286: Fix memleak in max9286_v4l2_register() + - media: ov2740: Fix memleak in ov2740_init_controls() + - media: ov5675: Fix memleak in ov5675_init_controls() + - media: i2c: tc358746: fix missing return assignment + - media: i2c: tc358746: fix ignoring read error in g_register callback + - media: i2c: tc358746: fix possible endianness issue + - media: ov5640: Fix soft reset sequence and timings + - media: ov5640: Handle delays when no reset_gpio set + - media: mc: Get media_device directly from pad + - media: i2c: ov772x: Fix memleak in ov772x_probe() + - media: i2c: imx219: Split common registers from mode tables + - media: i2c: imx219: Fix binning for RAW8 capture + - media: platform: mtk-mdp3: Fix return value check in mdp_probe() + - media: camss: csiphy-3ph: avoid undefined behavior + - media: platform: mtk-mdp3: fix Kconfig dependencies + - media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data + - media: v4l2-jpeg: ignore the unknown APP14 marker + - media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399 + - media: imx-jpeg: Apply clk_bulk api instead of operating specific clk + - media: amphion: correct the unspecified color space + - media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers + - media: rc: Fix use-after-free bugs caused by ene_tx_irqsim() + - media: atomisp: fix videobuf2 Kconfig depenendency + - media: atomisp: Only set default_run_mode on first open of a stream/asd + - media: i2c: ov7670: 0 instead of -EINVAL was returned + - media: usb: siano: Fix use after free bugs caused by do_submit_urb + - media: saa7134: Use video_unregister_device for radio_dev + - rpmsg: glink: Avoid infinite loop on intent for missing channel + - rpmsg: glink: Release driver_override + - ARM: OMAP2+: omap4-common: Fix refcount leak bug + - arm64: dts: qcom: msm8996: Add additional A2NoC clocks + - udf: Define EFSCORRUPTED error code + - context_tracking: Fix noinstr vs KASAN + - exit: Detect and fix irq disabled state in oops + - ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy + - fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected + - blk-iocost: fix divide by 0 error in calc_lcoefs() + - blk-cgroup: dropping parent refcount after pd_free_fn() is done + - blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and + blkcg_deactivate_policy() + - trace/blktrace: fix memory leak with using debugfs_lookup() + - btrfs: scrub: improve tree block error reporting + - arm64: zynqmp: Enable hs termination flag for USB dwc3 controller + - cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE + - x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads + - cpuidle: drivers: firmware: psci: Dont instrument suspend code + - cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG + - perf/x86/intel/uncore: Add Meteor Lake support + - wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() + - wifi: ath11k: fix monitor mode bringup crash + - wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() + - rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks + - rcu: Suppress smp_processor_id() complaint in + synchronize_rcu_expedited_wait() + - srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL + - rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug + - rcu-tasks: Handle queue-shrink/callback-enqueue race condition + - wifi: ath11k: debugfs: fix to work with multiple PCI devices + - thermal: intel: Fix unsigned comparison with less than zero + - timers: Prevent union confusion from unexpected restart_syscall() + - x86/bugs: Reset speculation control settings on init + - bpftool: Always disable stack protection for BPF objects + - wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out- + of-bounds + - wifi: rtw89: fix assignation of TX BD RAM table + - wifi: mt7601u: fix an integer underflow + - inet: fix fast path in __inet_hash_connect() + - ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB + - ice: add missing checks for PF vsi type + - Compiler attributes: GCC cold function alignment workarounds + - ACPI: Don't build ACPICA with '-Os' + - bpf, docs: Fix modulo zero, division by zero, overflow, and underflow + - thermal: intel: intel_pch: Add support for Wellsburg PCH + - clocksource: Suspend the watchdog temporarily when high read latency + detected + - crypto: hisilicon: Wipe entire pool on error + - net: bcmgenet: Add a check for oversized packets + - m68k: Check syscall_trace_enter() return code + - s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping + - netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj() + - can: isotp: check CAN address family in isotp_bind() + - gcc-plugins: drop -std=gnu++11 to fix GCC 13 build + - tools/power/x86/intel-speed-select: Add Emerald Rapid quirk + - platform/x86: dell-ddv: Add support for interface version 3 + - wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup + - ACPI: video: Fix Lenovo Ideapad Z570 DMI match + - net/mlx5: fw_tracer: Fix debug print + - coda: Avoid partial allocation of sig_inputArgs + - uaccess: Add minimum bounds check on kernel buffer size + - s390/idle: mark arch_cpu_idle() noinstr + - time/debug: Fix memory leak with using debugfs_lookup() + - PM: domains: fix memory leak with using debugfs_lookup() + - PM: EM: fix memory leak with using debugfs_lookup() + - Bluetooth: Fix issue with Actions Semi ATS2851 based devices + - Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 + - Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE + - wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30 + - hv_netvsc: Check status in SEND_RNDIS_PKT completion message + - s390/kfence: fix page fault reporting + - devlink: Fix TP_STRUCT_entry in trace of devlink health report + - scm: add user copy checks to put_cmsg() + - drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F + - drm: panel-orientation-quirks: Add quirk for DynaBook K50 + - drm/amd/display: Reduce expected sdp bandwidth for dcn321 + - drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h + write + - drm/amd/display: Fix potential null-deref in dm_resume + - drm/omap: dsi: Fix excessive stack usage + - HID: Add Mapping for System Microphone Mute + - drm/tiny: ili9486: Do not assume 8-bit only SPI controllers + - drm/amd/display: Defer DIG FIFO disable after VID stream enable + - drm/radeon: free iio for atombios when driver shutdown + - drm/amd: Avoid BUG() for case of SRIOV missing IP version + - drm/amdkfd: Page aligned memory reserve size + - scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write + - Revert "fbcon: don't lose the console font across generic->chip driver + switch" + - drm/amd: Avoid ASSERT for some message failures + - drm: amd: display: Fix memory leakage + - drm/amd/display: fix mapping to non-allocated address + - HID: uclogic: Add frame type quirk + - HID: uclogic: Add battery quirk + - HID: uclogic: Add support for XP-PEN Deco Pro SW + - HID: uclogic: Add support for XP-PEN Deco Pro MW + - drm/msm/dsi: Add missing check for alloc_ordered_workqueue + - drm: rcar-du: Add quirk for H3 ES1.x pclk workaround + - drm: rcar-du: Fix setting a reserved bit in DPLLCR + - drm/drm_print: correct format problem + - drm/amd/display: Set hvm_enabled flag for S/G mode + - drm/client: Test for connectors before sending hotplug event + - habanalabs: extend fatal messages to contain PCI info + - habanalabs: fix bug in timestamps registration code + - docs/scripts/gdb: add necessary make scripts_gdb step + - drm/msm/dpu: Add DSC hardware blocks to register snapshot + - ASoC: soc-compress: Reposition and add pcm_mutex + - ASoC: kirkwood: Iterate over array indexes instead of using pointer math + - regulator: max77802: Bounds check regulator id against opmode + - regulator: s5m8767: Bounds check id indexing into arrays + - Revert "drm/amdgpu: TA unload messages are not actually sent to psp when + amdgpu is uninstalled" + - drm/amd/display: fix FCLK pstate change underflow + - gfs2: Improve gfs2_make_fs_rw error handling + - hwmon: (coretemp) Simplify platform device handling + - hwmon: (nct6775) Directly call ASUS ACPI WMI method + - hwmon: (nct6775) B650/B660/X670 ASUS boards support + - pinctrl: at91: use devm_kasprintf() to avoid potential leaks + - drm/amd/display: Do not commit pipe when updating DRR + - scsi: snic: Fix memory leak with using debugfs_lookup() + - scsi: ufs: core: Fix device management cmd timeout flow + - HID: logitech-hidpp: Don't restart communication if not necessary + - drm/amd/display: Enable P-state validation checks for DCN314 + - drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 + - drm/amd/display: Disable HUBP/DPP PG on DCN314 for now + - drm/amd/display: disable SubVP + DRR to prevent underflow + - dm thin: add cond_resched() to various workqueue loops + - dm cache: add cond_resched() to various workqueue loops + - nfsd: zero out pointers after putting nfsd_files on COPY setup error + - nfsd: don't hand out delegation on setuid files being opened for write + - cifs: prevent data race in smb2_reconnect() + - drm/i915/mtl: Correct implementation of Wa_18018781329 + - drm/shmem-helper: Revert accidental non-GPL export + - driver core: fw_devlink: Avoid spurious error message + - wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu + - firmware: coreboot: framebuffer: Ignore reserved pixel color bits + - block: don't allow multiple bios for IOCB_NOWAIT issue + - block: clear bio->bi_bdev when putting a bio back in the cache + - block: be a bit more careful in checking for NULL bdev while polling + - rtc: pm8xxx: fix set-alarm race + - ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms' + - ipmi:ssif: resend_msg() cannot fail + - ipmi_ssif: Rename idle state and check + - ipmi:ssif: Add a timer between request retries + - io_uring: Replace 0-length array with flexible array + - io_uring: use user visible tail in io_uring_poll() + - io_uring: handle TIF_NOTIFY_RESUME when checking for task_work + - io_uring: add a conditional reschedule to the IOPOLL cancelation loop + - io_uring: add reschedule point to handle_tw_list() + - io_uring/rsrc: disallow multi-source reg buffers + - io_uring: remove MSG_NOSIGNAL from recvmsg + - io_uring/poll: allow some retries for poll triggering spuriously + - io_uring: fix fget leak when fs don't support nowait buffered read + - s390/extmem: return correct segment type in __segment_load() + - s390: discard .interp section + - s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler + - s390/kprobes: fix current_kprobe never cleared after kprobes reenter + - KVM: s390: disable migration mode when dirty tracking is disabled + - cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID + - cifs: Fix uninitialized memory read in smb3_qfs_tcon() + - cifs: Fix uninitialized memory reads for oparms.mode + - cifs: fix mount on old smb servers + - cifs: introduce cifs_io_parms in smb2_async_writev() + - cifs: split out smb3_use_rdma_offload() helper + - cifs: don't try to use rdma offload on encrypted connections + - cifs: Check the lease context if we actually got a lease + - cifs: return a single-use cfid if we did not get a lease + - scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization + - scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() + - scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi + - btrfs: hold block group refcount during async discard + - btrfs: sysfs: update fs features directory asynchronously + - locking/rwsem: Prevent non-first waiter from spinning in down_write() + slowpath + - ksmbd: fix wrong data area length for smb2 lock request + - ksmbd: do not allow the actual frame length to be smaller than the rfc1002 + length + - ksmbd: fix possible memory leak in smb2_lock() + - torture: Fix hang during kthread shutdown phase + - ARM: dts: exynos: correct HDMI phy compatible in Exynos4 + - io_uring: mark task TASK_RUNNING before handling resume/task work + - hfs: fix missing hfs_bnode_get() in __hfs_bnode_create + - fs: hfsplus: fix UAF issue in hfsplus_put_super + - exfat: fix reporting fs error when reading dir beyond EOF + - exfat: fix unexpected EOF while reading dir + - exfat: redefine DIR_DELETED as the bad cluster number + - exfat: fix inode->i_blocks for non-512 byte sector size device + - fs: dlm: start midcomms before scand + - fs: dlm: fix use after free in midcomms commit + - fs: dlm: be sure to call dlm_send_queue_flush() + - fs: dlm: fix race setting stop tx flag + - fs: dlm: don't set stop rx flag after node reset + - fs: dlm: move sending fin message into state change handling + - fs: dlm: send FIN ack back in right cases + - f2fs: fix information leak in f2fs_move_inline_dirents() + - f2fs: retry to update the inode page given data corruption + - f2fs: fix cgroup writeback accounting with fs-layer encryption + - f2fs: fix kernel crash due to null io->bio + - f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()" + - ocfs2: fix defrag path triggering jbd2 ASSERT + - ocfs2: fix non-auto defrag path not working issue + - fs/cramfs/inode.c: initialize file_ra_state + - selftests/landlock: Skip overlayfs tests when not supported + - selftests/landlock: Test ptrace as much as possible with Yama + - udf: Truncate added extents on failed expansion + - udf: Do not bother merging very long extents + - udf: Do not update file length for failed writes to inline files + - udf: Preserve link count of system files + - udf: Detect system inodes linked into directory hierarchy + - udf: Fix file corruption when appending just after end of preallocated + extent + - md: don't update recovery_cp when curr_resync is ACTIVE + - KVM: Destroy target device if coalesced MMIO unregistration fails + - KVM: VMX: Fix crash due to uninitialized current_vmcs + - KVM: Register /dev/kvm as the _very_ last thing during initialization + - KVM: x86: Purge "highest ISR" cache when updating APICv state + - KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps + - KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled + - KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID + - KVM: SVM: Flush the "current" TLB when activating AVIC + - KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target + - KVM: SVM: Don't put/load AVIC when setting virtual APIC mode + - KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI + - KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32 + - KVM: SVM: Fix potential overflow in SEV's send|receive_update_data() + - KVM: SVM: hyper-v: placate modpost section mismatch error + - selftests: x86: Fix incorrect kernel headers search path + - x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows) + - x86/crash: Disable virt in core NMI crash handler to avoid double shootdown + - x86/reboot: Disable virtualization in an emergency if SVM is supported + - x86/reboot: Disable SVM, not just VMX, when stopping CPUs + - x86/kprobes: Fix __recover_optprobed_insn check optimizing logic + - x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe + range + - x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter + - x86/microcode/AMD: Add a @cpu parameter to the reloading functions + - x86/microcode/AMD: Fix mixed steppings support + - x86/speculation: Allow enabling STIBP with legacy IBRS + - Documentation/hw-vuln: Document the interaction between IBRS and STIBP + - virt/sev-guest: Return -EIO if certificate buffer is not large enough + - brd: mark as nowait compatible + - brd: return 0/-error from brd_insert_page() + - brd: check for REQ_NOWAIT and set correct page allocation mask + - ima: fix error handling logic when file measurement failed + - ima: Align ima_file_mmap() parameters with mmap_file LSM hook + - selftests/powerpc: Fix incorrect kernel headers search path + - selftests/ftrace: Fix eprobe syntax test case to check filter support + - selftests: sched: Fix incorrect kernel headers search path + - selftests: core: Fix incorrect kernel headers search path + - selftests: pid_namespace: Fix incorrect kernel headers search path + - selftests: arm64: Fix incorrect kernel headers search path + - selftests: clone3: Fix incorrect kernel headers search path + - selftests: pidfd: Fix incorrect kernel headers search path + - selftests: membarrier: Fix incorrect kernel headers search path + - selftests: kcmp: Fix incorrect kernel headers search path + - selftests: media_tests: Fix incorrect kernel headers search path + - selftests: gpio: Fix incorrect kernel headers search path + - selftests: filesystems: Fix incorrect kernel headers search path + - selftests: user_events: Fix incorrect kernel headers search path + - selftests: ptp: Fix incorrect kernel headers search path + - selftests: sync: Fix incorrect kernel headers search path + - selftests: rseq: Fix incorrect kernel headers search path + - selftests: move_mount_set_group: Fix incorrect kernel headers search path + - selftests: mount_setattr: Fix incorrect kernel headers search path + - selftests: perf_events: Fix incorrect kernel headers search path + - selftests: ipc: Fix incorrect kernel headers search path + - selftests: futex: Fix incorrect kernel headers search path + - selftests: drivers: Fix incorrect kernel headers search path + - selftests: dmabuf-heaps: Fix incorrect kernel headers search path + - selftests: vm: Fix incorrect kernel headers search path + - selftests: seccomp: Fix incorrect kernel headers search path + - irqdomain: Fix association race + - irqdomain: Fix disassociation race + - irqdomain: Look for existing mapping only once + - irqdomain: Drop bogus fwspec-mapping error handling + - irqdomain: Refactor __irq_domain_alloc_irqs() + - irqdomain: Fix mapping-creation race + - irqdomain: Fix domain registration race + - crypto: qat - fix out-of-bounds read + - mm/damon/paddr: fix missing folio_put() + - ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() + - ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC + - jbd2: fix data missing when reusing bh which is ready to be checkpointed + - ext4: optimize ea_inode block expansion + - ext4: refuse to create ea block when umounted + - cxl/pmem: Fix nvdimm registration races + - Input: exc3000 - properly stop timer on shutdown + - mtd: spi-nor: sfdp: Fix index value for SCCR dwords + - mtd: spi-nor: spansion: Consider reserved bits in CFR5 register + - dm: send just one event on resize, not two + - dm: add cond_resched() to dm_wq_work() + - dm: add cond_resched() to dm_wq_requeue_work() + - wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice + - wifi: rtl8xxxu: Use a longer retry limit of 48 + - wifi: ath11k: allow system suspend to survive ath11k + - wifi: cfg80211: Fix use after free for wext + - wifi: cfg80211: Set SSID if it is not already set + - cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies + - qede: fix interrupt coalescing configuration + - thermal: intel: powerclamp: Fix cur_state for multi package system + - dm flakey: fix logic when corrupting a bio + - dm cache: free background tracker's queued work in btracker_destroy + - dm flakey: don't corrupt the zero page + - dm flakey: fix a bug with 32-bit highmem systems + - hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation + - hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div() + - spi: intel: Check number of chip selects after reading the descriptor + - ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node + - ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node + - ARM: dts: exynos: correct TMU phandle in Exynos4210 + - ARM: dts: exynos: correct TMU phandle in Exynos4 + - ARM: dts: exynos: correct TMU phandle in Odroid XU3 family + - ARM: dts: exynos: correct TMU phandle in Exynos5250 + - ARM: dts: exynos: correct TMU phandle in Odroid XU + - ARM: dts: exynos: correct TMU phandle in Odroid HC1 + - arm64: acpi: Fix possible memory leak of ffh_ctxt + - arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP + - arm64: Reset KASAN tag in copy_highpage with HW tags only + - fuse: add inode/permission checks to fileattr_get/fileattr_set + - rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails + - ceph: update the time stamps and try to drop the suid/sgid + - regulator: core: Use ktime_get_boottime() to determine how long a regulator + was off + - panic: fix the panic_print NMI backtrace setting + - mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON + - genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced + - genirq/msi: Take the per-device MSI lock before validating the control + structure + - spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits + - alpha: fix FEN fault handling + - dax/kmem: Fix leak of memory-hotplug resources + - mips: fix syscall_get_nr + - media: ipu3-cio2: Fix PM runtime usage_count in driver unbind + - remoteproc/mtk_scp: Move clk ops outside send_lock + - vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd + - docs: gdbmacros: print newest record + - mm: memcontrol: deprecate charge moving + - mm/thp: check and bail out if page in deferred queue already + - ktest.pl: Give back console on Ctrt^C on monitor + - kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list + - ktest.pl: Fix missing "end_monitor" when machine check fails + - ktest.pl: Add RUN_TIMEOUT option with default unlimited + - memory tier: release the new_memtier in find_create_memory_tier() + - ring-buffer: Handle race between rb_move_tail and rb_check_pages + - tools/bootconfig: fix single & used for logical condition + - tracing/eprobe: Fix to add filter on eprobe description in README file + - iommu/amd: Add a length limitation for the ivrs_acpihid command-line + parameter + - scsi: aacraid: Allocate cmd_priv with scsicmd + - scsi: qla2xxx: Fix link failure in NPIV environment + - scsi: qla2xxx: Check if port is online before sending ELS + - scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests + - scsi: qla2xxx: Remove unintended flag clearing + - scsi: qla2xxx: Fix erroneous link down + - scsi: qla2xxx: Remove increment of interface err cnt + - scsi: ses: Don't attach if enclosure has no components + - scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process() + - scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses + - scsi: ses: Fix possible desc_ptr out-of-bounds accesses + - scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() + - RISC-V: add a spin_shadow_stack declaration + - riscv: Avoid enabling interrupts in die() + - riscv: mm: fix regression due to update_mmu_cache change + - riscv: jump_label: Fixup unaligned arch_static_branch function + - riscv: ftrace: Fixup panic by disabling preemption + - riscv, mm: Perform BPF exhandler fixup on page fault + - riscv: ftrace: Remove wasted nops for !RISCV_ISA_C + - riscv: ftrace: Reduce the detour code size to half + - MIPS: DTS: CI20: fix otg power gpio + - PCI/PM: Observe reset delay irrespective of bridge_d3 + - PCI: Unify delay handling for reset and resume + - PCI: hotplug: Allow marking devices as disconnected during bind/unbind + - PCI: Avoid FLR for AMD FCH AHCI adapters + - PCI/DPC: Await readiness of secondary bus after reset + - bus: mhi: ep: Only send -ENOTCONN status if client driver is available + - bus: mhi: ep: Move chan->lock to the start of processing queued ch ring + - bus: mhi: ep: Save channel state locally during suspend and resume + - iommufd: Make sure to zero vfio_iommu_type1_info before copying to user + - iommufd: Do not add the same hwpt to the ioas->hwpt_list twice + - iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode + - iommu/vt-d: Fix PASID directory pointer coherency + - vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR + - vfio/type1: prevent underflow of locked_vm via exec() + - vfio/type1: track locked_vm per dma + - vfio/type1: restore locked_vm + - drm/amd: Fix initialization for nbio 7.5.1 + - drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv + - drm/radeon: Fix eDP for single-display iMac11,2 + - drm/i915: Don't use stolen memory for ring buffers with LLC + - drm/i915: Don't use BAR mappings for ring buffers with LLC + - drm/gud: Fix UBSAN warning + - drm/edid: fix AVI infoframe aspect ratio handling + - drm/edid: fix parsing of 3D modes from HDMI VSDB + - qede: avoid uninitialized entries in coal_entry array + - brd: use radix_tree_maybe_preload instead of radix_tree_preload + - net: avoid double iput when sock_alloc_file fails + - Linux 6.2.3 + + * Miscellaneous Ubuntu changes + - [Config] update annotations after applying 6.2.3 stable patches + - [Config] update annotations after applying 6.2.6 stable patches + + -- Andrea Righi Tue, 14 Mar 2023 16:43:44 +0100 + +linux (6.2.0-16.16) lunar; urgency=medium + + * lunar/linux: 6.2.0-16.16 -proposed tracker (LP: #2009914) + + * linux-libc-dev is no longer multi-arch safe (LP: #2009355) + - Revert "UBUNTU: [Packaging] install headers to debian/linux-libc-dev + directly" + + * linux: CONFIG_SERIAL_8250_MID=y (LP: #2009283) + - [Config] enable CONFIG_SERIAL_8250_MID=y + + * cpufreq: intel_pstate: Update Balance performance EPP for Sapphire Rapids + (LP: #2008519) + - cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids + + -- Andrea Righi Fri, 10 Mar 2023 18:34:28 +0100 + +linux (6.2.0-15.15) lunar; urgency=medium + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: document annotations headers + + -- Andrea Righi Fri, 10 Mar 2023 07:36:59 +0100 + +linux (6.2.0-14.14) lunar; urgency=medium + + * lunar/linux: 6.2.0-14.14 -proposed tracker (LP: #2009856) + + * Miscellaneous Ubuntu changes + - [Packaging] rust: add rust build dependencies to all arches + - [Packaging] Support skipped dkms modules + - [Packaging] actually enforce set -e in dkms-build--nvidia-N + - [Packaging] Preserve the correct log file variable value + - [Packaging] update getabis + + -- Andrea Righi Thu, 09 Mar 2023 16:40:36 +0100 + +linux (6.2.0-13.13) lunar; urgency=medium + + * lunar/linux: 6.2.0-13.13 -proposed tracker (LP: #2009704) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/master) + + * mt7921: add support of MTFG table (LP: #2009642) + - wifi: mt76: mt7921: add support to update fw capability with MTFG table + + -- Andrea Righi Wed, 08 Mar 2023 14:40:25 +0100 + +linux (6.2.0-12.12) lunar; urgency=medium + + * lunar/linux: 6.2.0-12.12 -proposed tracker (LP: #2009698) + + * Miscellaneous Ubuntu changes + - SAUCE: enforce rust availability only on x86_64 + - [Config] update CONFIG_RUST_IS_AVAILABLE + + -- Andrea Righi Wed, 08 Mar 2023 12:50:15 +0100 + +linux (6.2.0-11.11) lunar; urgency=medium + + * lunar/linux: 6.2.0-11.11 -proposed tracker (LP: #2009697) + + * Miscellaneous Ubuntu changes + - [Packaging] do not stop the build if rust is not available + + -- Andrea Righi Wed, 08 Mar 2023 12:24:55 +0100 + +linux (6.2.0-10.10) lunar; urgency=medium + + * lunar/linux: 6.2.0-10.10 -proposed tracker (LP: #2009673) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/master) + + * enable Rust support in the kernel (LP: #2007654) + - [Packaging] propagate makefile variables to kernelconfig + - SAUCE: rust: fix regexp in scripts/is_rust_module.sh + - SAUCE: scripts: rust: drop is_rust_module.sh + - SAUCE: rust: allow to use INIT_STACK_ALL_ZERO + - SAUCE: scripts: Exclude Rust CUs with pahole + - SAUCE: modpost: support arbitrary symbol length in modversion + - SAUCE: allows to enable Rust with modversions + - SAUCE: rust: properly detect the version of libclang used by bindgen + - [Packaging] rust: add the proper make flags to enable rust support + - [Packaging] add rust dependencies + - [Packaging] bpftool: always use vmlinux to generate headers + - [Packaging] run rustavailable target as debugging before build + - [Config] enable Rust support + + * Fail to output sound to external monitor which connects via docking station + (LP: #2009024) + - [Config] Enable CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM + + * Miscellaneous Ubuntu changes + - SAUCE: Makefile: replace rsync with tar + + -- Andrea Righi Wed, 08 Mar 2023 12:01:56 +0100 + +linux (6.2.0-1.1) lunar; urgency=medium + + * lunar/linux: 6.2.0-1.1 -proposed tracker (LP: #2009621) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/master) + + * kinetic: apply new apparmor and LSM stacking patch set (LP: #1989983) + - SAUCE: apparmor: Add fine grained mediation of posix mqueues + - SAUCE: apparmor: add user namespace creation mediation + + * Lunar update: v6.2.2 upstream stable release (LP: #2009358) + - ALSA: hda: cs35l41: Correct error condition handling + - crypto: arm64/sm4-gcm - Fix possible crash in GCM cryption + - bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state + - vc_screen: don't clobber return value in vcs_read + - drm/amd/display: Move DCN314 DOMAIN power control to DMCUB + - drm/amd/display: Properly reuse completion structure + - scripts/tags.sh: fix incompatibility with PCRE2 + - wifi: rtw88: usb: Set qsel correctly + - wifi: rtw88: usb: send Zero length packets if necessary + - wifi: rtw88: usb: drop now unnecessary URB size check + - usb: dwc3: pci: add support for the Intel Meteor Lake-M + - USB: serial: option: add support for VW/Skoda "Carstick LTE" + - usb: gadget: u_serial: Add null pointer check in gserial_resume + - arm64: dts: uniphier: Fix property name in PXs3 USB node + - usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO + - USB: core: Don't hold device lock while reading the "descriptors" sysfs file + - Linux 6.2.2 + + * Lunar update: v6.2.1 upstream stable release (LP: #2009127) + - uaccess: Add speculation barrier to copy_from_user() + - x86/alternatives: Introduce int3_emulate_jcc() + - x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions + - x86/static_call: Add support for Jcc tail-calls + - HID: mcp-2221: prevent UAF in delayed work + - wifi: mwifiex: Add missing compatible string for SD8787 + - audit: update the mailing list in MAINTAINERS + - platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY + - platform/x86: nvidia-wmi-ec-backlight: Add force module parameter + - ext4: Fix function prototype mismatch for ext4_feat_ktype + - randstruct: disable Clang 15 support + - bpf: add missing header file include + - Linux 6.2.1 + + * Fix mediatek wifi driver crash when loading wrong SAR table (LP: #2009118) + - wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read + + * overlayfs mounts as R/O over idmapped mount (LP: #2009065) + - SAUCE: overlayfs: handle idmapped mounts in ovl_do_(set|remove)xattr + + * RaptorLake: Fix the Screen is shaking by onboard HDMI port in mirror mode + (LP: #1993561) + - drm/i915/display: Drop check for doublescan mode in modevalid + - drm/i915/display: Prune Interlace modes for Display >=12 + + * screen flicker after PSR2 enabled (LP: #2007516) + - SAUCE: drm/i915/display/psr: Disable PSR2 sel fetch on panel SHP 5457 + + * [23.04 FEAT] Support for new IBM Z Hardware (IBM z16) - Reset DAT-Protection + facility support (LP: #1982378) + - s390/mm: add support for RDP (Reset DAT-Protection) + + * [23.04 FEAT] zcrypt DD: AP command filtering (LP: #2003637) + - s390/zcrypt: introduce ctfm field in struct CPRBX + + * rtcpie in timers from ubuntu_kernel_selftests randomly failing + (LP: #1814234) + - SAUCE: selftest: rtcpie: Force passing unreliable subtest + + * [23.04 FEAT] Support for List-Directed IPL and re-IPL from ECKD DASD + (LP: #2003394) + - s390/ipl: add DEFINE_GENERIC_LOADPARM() + - s390/ipl: add loadparm parameter to eckd ipl/reipl data + + * Miscellaneous Ubuntu changes + - SAUCE: drm/i915/sseu: fix max_subslices array-index-out-of-bounds access + - SAUCE: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type + - SAUCE: Revert "fbdev: Make registered_fb[] private to fbmem.c" + - [Packaging] disable signing for ppc64el + - [Config] define CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + - SAUCE: Revert "arm64/fpsimd: Make kernel_neon_ API _GPL" + + -- Andrea Righi Tue, 07 Mar 2023 18:45:31 +0100 + +linux (6.2.0-0.0) lunar; urgency=medium + + * Empty entry + + -- Andrea Righi Fri, 03 Mar 2023 08:42:43 +0100 + +linux-unstable (6.2.0-10.10) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-10.10 -proposed tracker (LP: #2007818) + + * Built-in camera device dies after runtime suspended (LP: #2007530) + - SAUCE: usb: xhci: Workaround for runpm issue on AMD xHC + + * Miscellaneous Ubuntu changes + - [Config] update annotations after rebase to v6.2 + + [ Upstream Kernel Changes ] + + * Rebase to v6.2 + + -- Andrea Righi Mon, 20 Feb 2023 10:36:20 +0100 + +linux-unstable (6.2.0-9.9) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-9.9 -proposed tracker (LP: #2007069) + + * Move kernel ADT tests to python3 (LP: #2004429) + - [Debian] Use a python3 compatable kernel-testing repo + + * Mediatek FM350-GL wwan module failed to init: Invalid device status 0x1 + (LP: #2002089) + - SAUCE: Revert "net: wwan: t7xx: Add AP CLDMA" + - SAUCE: net: wwan: t7xx: Add AP CLDMA + - SAUCE: net: wwan: t7xx: Infrastructure for early port configuration + - SAUCE: net: wwan: t7xx: PCIe reset rescan + - SAUCE: net: wwan: t7xx: Enable devlink based fw flashing and coredump + collection + - SAUCE: net: wwan: t7xx: Devlink documentation + + * LXD containers using shiftfs on ZFS or TMPFS broken on 5.15.0-48.54 + (LP: #1990849) + - SAUCE: shiftfs: fix -EOVERFLOW inside the container + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: do not drop undefined configs in derivatives + - [Packaging]: annotations: fix _remove_entry() logic + - [Packaging] rsync no longer available on lunar + - [Packaging] annotations: Handle single-line annoation rules + - [Packaging] annotations: Preserve single-line annotation rules + - [Packaging] annotations: Fix linter errors + - [Packaging] annotations: Clean up policy writes + - [Packaging] annotations: Handle tabs in annotations file + - [Packaging] annotations: Fail on invalid lines + - [Packaging] annotations: Write out annotations with notes first + - [Packaging] annotations: Check validity of FLAVOUR_DEP + - [Config] update annotations to split configs with/without notes + - [Packaging] annotations: various code cleanups + - [Config] update annotations after rebase to v6.2-rc8 + + * Miscellaneous upstream changes + - selftests/net: mv bpf/nat6to4.c to net folder + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc8 + + -- Andrea Righi Mon, 13 Feb 2023 09:32:18 +0100 + +linux-unstable (6.2.0-8.8) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-8.8 -proposed tracker (LP: #2004229) + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable signing for ppc64el and s390x + - SAUCE: s390/decompressor: specify __decompress() buf len to avoid overflow + + -- Andrea Righi Tue, 31 Jan 2023 08:21:21 +0100 + +linux-unstable (6.2.0-7.7) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-7.7 -proposed tracker (LP: #2004142) + + -- Andrea Righi Mon, 30 Jan 2023 10:23:15 +0100 + +linux-unstable (6.2.0-6.6) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-6.6 -proposed tracker (LP: #2004138) + + * Miscellaneous Ubuntu changes + - [Packaging] debian/rules: Bring back 'editconfigs' + - [Packaging] debian/rules: 1-maintainer.mk -- Use make's if-else + - [Packaging] annotations: make sure to always drop undefined configs + - [Config] update annotations after rebase to v6.2-rc6 + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc6 + + -- Andrea Righi Mon, 30 Jan 2023 09:20:26 +0100 + +linux-unstable (6.2.0-5.5) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-5.5 -proposed tracker (LP: #2003682) + + * [23.04] Kernel 6.2 does not boot on s390x (LP: #2003348) + - SAUCE Revert "zstd: import usptream v1.5.2" + - SAUCE: Revert "zstd: Move zstd-common module exports to + zstd_common_module.c" + + * Revoke & rotate to new signing key (LP: #2002812) + - [Packaging] Revoke and rotate to new signing key + + * CVE-2023-0179 + - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits + + * [23.04] net/smc: Alibaba patches about tunable buffer sizes may cause errors + and need to be removed (kernel 6.2) (LP: #2003547) + - SAUCE: Revert "net/smc: Unbind r/w buffer size from clcsock and make them + tunable" + - SAUCE: Revert "net/smc: Introduce a specific sysctl for TEST_LINK time" + + * 5.15 stuck at boot on c4.large (LP: #1956780) + - SAUCE: Revert "PCI/MSI: Mask MSI-X vectors only on success" + + * Miscellaneous Ubuntu changes + - [Packaging] scripts/misc/kernelconfig: Disable config checks for mainline + builds + - [Packaging] annotations: add CONFIG_GCC_VERSION to the list of ignored + configs + + -- Andrea Righi Mon, 23 Jan 2023 08:20:26 +0100 + +linux-unstable (6.2.0-4.4) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-4.4 -proposed tracker (LP: #2003051) + + * Miscellaneous Ubuntu changes + - [Packaging] add python3 as a build dependency + - [Packaging] scripts/misc/kernelconfig: Rewrite + + -- Andrea Righi Tue, 17 Jan 2023 09:18:54 +0100 + +linux-unstable (6.2.0-3.3) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-3.3 -proposed tracker (LP: #2002939) + + * Enable kernel config for P2PDMA (LP: #1987394) + - [Config] Enable CONFIG_HSA_AMD_P2P + + * Miscellaneous Ubuntu changes + - SAUCE: (no-up) Remove obj- += foo.o hack + - SAUCE: (no-up) re-add ubuntu/ directory + - [Config] enable EFI handover protocol + - [Packaging] Fix module-check error when modules are compressed + - SAUCE: (no-up) do not remove debian directory by 'make mrproper' + - [Packaging] debian/rules: Drop AUTOBUILD + - [Packaging] debian/rules: Drop NOKERNLOG and PRINTSHAS env variables + - [Packaging] debian/rules: Replace skip variables with skip_checks + - [Packaging] checks/retpoline-check: Make 'skipretpoline' argument optional + - [Packaging] checks/module-signature-check: Add 'skip_checks' argument + - [Packaging] debian/rules: Rename 'skip_dbg' to 'do_dbgsym_package' + - [Packaging] debian/rules: Rename 'skip_checks' to 'do_skip_checks' + - [Packaging] debian/rules: Rename 'full_build' to 'do_full_build' + - [Packaging] debian/rules: Fix PPA debug package builds + - [Packaging] debian/rules: Remove debug package install directory earlier + - [Packaging] debian/rules: Remove unnecessary 'lockme_' variables + - [Packaging] debian/rules: Remove unused target 'diffupstream' + - [Packaging] debian/rules: Mark PHONY targets individually + - [Packaging] debian/rules: Clean up 'help' target output + - [Packaging] debian/rules: Clean up 'printenv' target output + - [Packaging] debian/rules: Add missing 'do_' variables to 'printenv' + - [Config] update annotations after rebase to v6.2-rc4 + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc4 + + -- Andrea Righi Mon, 16 Jan 2023 16:01:40 +0100 + +linux-unstable (6.2.0-2.2) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-2.2 -proposed tracker (LP: #2001892) + + * Soundwire support for the Intel RPL Gen 0C40/0C11 platforms (LP: #2000030) + - SAUCE: ASoC: Intel: soc-acpi: add configuration for variant of 0C40 product + - SAUCE: ASoC: Intel: soc-acpi: add configuration for variant of 0C11 product + + * Miscellaneous Ubuntu changes + - [Config] update toolchain version in annotations + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Support skipped dkms modules" + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc2 + + -- Andrea Righi Thu, 05 Jan 2023 09:19:55 +0100 + +linux-unstable (6.2.0-1.1) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-1.1 -proposed tracker (LP: #2000904) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: remove configs that are undefined across all + arches/flavours + - SAUCE: Revert "apparmor: make __aa_path_perm() static" + - [Packaging] abi-check: ignore failures when abi check is skipped + - [Packaging] temporarily disable zfs dkms + - [Config] update annotations after rebase to 6.2-rc1 + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc1 + + -- Andrea Righi Wed, 04 Jan 2023 12:08:32 +0100 + +linux-unstable (6.2.0-0.0) lunar; urgency=medium + + * Empty entry + + -- Andrea Righi Sun, 01 Jan 2023 10:16:00 +0100 + +linux (6.1.0-11.11) lunar; urgency=medium + + * lunar/linux: 6.1.0-11.11 -proposed tracker (LP: #2000704) + + * Packaging resync (LP: #1786013) + - [Packaging] update helper scripts + + * Lunar update: v6.1.1 upstream stable release (LP: #2000706) + - x86/vdso: Conditionally export __vdso_sgx_enter_enclave() + - libbpf: Fix uninitialized warning in btf_dump_dump_type_data + - PCI: mt7621: Add sentinel to quirks table + - mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem + - mips: ralink: mt7621: soc queries and tests as functions + - mips: ralink: mt7621: do not use kzalloc too early + - irqchip/ls-extirq: Fix endianness detection + - udf: Discard preallocation before extending file with a hole + - udf: Fix preallocation discarding at indirect extent boundary + - udf: Do not bother looking for prealloc extents if i_lenExtents matches + i_size + - udf: Fix extending file within last block + - usb: gadget: uvc: Prevent buffer overflow in setup handler + - USB: serial: option: add Quectel EM05-G modem + - USB: serial: cp210x: add Kamstrup RF sniffer PIDs + - USB: serial: f81232: fix division by zero on line-speed change + - USB: serial: f81534: fix division by zero on line-speed change + - xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N + - staging: r8188eu: fix led register settings + - igb: Initialize mailbox message for VF reset + - usb: typec: ucsi: Resume in separate work + - usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system + for Raptor Lake + - cifs: fix oops during encryption + - KEYS: encrypted: fix key instantiation with user-provided data + - Linux 6.1.1 + + * Expose built-in trusted and revoked certificates (LP: #1996892) + - [Packaging] Expose built-in trusted and revoked certificates + + * Fix System cannot detect bluetooth after running suspend stress test + (LP: #1998727) + - wifi: rtw88: 8821c: enable BT device recovery mechanism + + * Gnome doesn't run smooth when performing normal usage with RPL-P CPU + (LP: #1998419) + - drm/i915/rpl-p: Add stepping info + + * Mute/mic LEDs no function on a HP platfrom (LP: #1998882) + - ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook + + * Add additional Mediatek MT7922 BT device ID (LP: #1998885) + - Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922 + + * Support Icicle Kit reference design v2022.10 (LP: #1993148) + - SAUCE: riscv: dts: microchip: Disable PCIe on the Icicle Kit + + * Add iommu passthrough quirk for Intel IPU6 on RaptorLake (LP: #1989041) + - SAUCE: iommu: intel-ipu: use IOMMU passthrough mode for Intel IPUs on Raptor + Lake + + * Enable Intel FM350 wwan CCCI driver port logging (LP: #1997686) + - net: wwan: t7xx: use union to group port type specific data + - net: wwan: t7xx: Add port for modem logging + + * TEE Support for CCP driver (LP: #1991608) + - crypto: ccp - Add support for TEE for PCI ID 0x14CA + + * Kinetic update: v5.19.17 upstream stable release (LP: #1994179) + - Revert "fs: check FMODE_LSEEK to control internal pipe splicing" + - kbuild: Add skip_encoding_btf_enum64 option to pahole + + * Kinetic update: v5.19.15 upstream stable release (LP: #1994078) + - Revert "clk: ti: Stop using legacy clkctrl names for omap4 and 5" + + * support independent clock and LED GPIOs for Intel IPU6 platforms + (LP: #1989046) + - SAUCE: platform/x86: int3472: support independent clock and LED GPIOs + + * Kernel livepatch support for for s390x (LP: #1639924) + - [Config] Enable EXPOLINE_EXTERN on s390x + + * Kinetic update: v5.19.7 upstream stable release (LP: #1988733) + - Revert "PCI/portdrv: Don't disable AER reporting in + get_port_device_capability()" + + * Kinetic update: v5.19.3 upstream stable release (LP: #1987345) + - Revert "mm: kfence: apply kmemleak_ignore_phys on early allocated pool" + + * Fix non-working e1000e device after resume (LP: #1951861) + - SAUCE: Revert "e1000e: Add polling mechanism to indicate CSME DPG exit" + + * Add additional Mediatek MT7921 WiFi/BT device IDs (LP: #1937004) + - SAUCE: Bluetooth: btusb: Add support for Foxconn Mediatek Chip + + * Fix system sleep on TGL systems with Intel ME (LP: #1919321) + - SAUCE: PCI: Serialize TGL e1000e PM ops + + * Fix broken e1000e device after S3 (LP: #1897755) + - SAUCE: e1000e: Increase polling timeout on MDIC ready bit + + * Fix unusable USB hub on Dell TB16 after S3 (LP: #1855312) + - SAUCE: USB: core: Make port power cycle a seperate helper function + - SAUCE: USB: core: Attempt power cycle port when it's in eSS.Disabled state + + * Set explicit CC in the headers package (LP: #1999750) + - [Packaging] Set explicit CC in the headers package + + * commit cf58599cded35cf4affed1e659c0e2c742d3fda7 seems to be missing in + kinetic master to remove "hio" reference from Makefile (LP: #1999556) + - SAUCE: remove leftover reference to ubuntu/hio driver + + * Miscellaneous Ubuntu changes + - [Packaging] kernelconfig: always complete all config checks + - [Packaging] annotations: unify same rule across all flavour within the same + arch + - [Config] annotations: compact annotations file + - [Config] disable EFI_ZBOOT + - SAUCE: input: i8042: fix section mismatch warning + - debian/dkms-versions -- re-enable zfs + - [Packaging] old-kernelconfig: update config-check path + - [Packaging] update getabis + - [Packaging] update Ubuntu.md + + * Miscellaneous upstream changes + - Revert "drm/i915/opregion: check port number bounds for SWSCI display power + state" + + -- Andrea Righi Fri, 30 Dec 2022 11:23:16 +0100 + +linux (6.1.0-10.10) lunar; urgency=medium + + * lunar/linux: 6.1.0-10.10 -proposed tracker (LP: #1999569) + + * Soundwire support for the Intel RPL Gen platforms (LP: #1997944) + - ASoC: Intel: sof_sdw: Add support for SKU 0C10 product + - ASoC: Intel: soc-acpi: add SKU 0C10 SoundWire configuration + - ASoC: Intel: sof_sdw: Add support for SKU 0C40 product + - ASoC: Intel: soc-acpi: add SKU 0C40 SoundWire configuration + - ASoC: Intel: sof_sdw: Add support for SKU 0C4F product + - ASoC: rt1318: Add RT1318 SDCA vendor-specific driver + - ASoC: intel: sof_sdw: add rt1318 codec support. + - ASoC: Intel: sof_sdw: Add support for SKU 0C11 product + - ASoC: Intel: soc-acpi: add SKU 0C11 SoundWire configuration + - SAUCE: ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product + - [Config] enable CONFIG_SND_SOC_RT1318_SDW + + * Virtual GPU driver packaging regression (LP: #1996112) + - [Packaging] Reintroduce VM DRM drivers into modules + + -- Andrea Righi Tue, 13 Dec 2022 22:14:08 +0100 + +linux (6.1.0-9.9) lunar; urgency=medium + + * Empty entry (ABI bump) + + -- Andrea Righi Tue, 13 Dec 2022 21:31:08 +0100 + +linux (6.1.0-3.3) lunar; urgency=medium + + * lunar/linux: 6.1.0-3.3 -proposed tracker (LP: #1999534) + + * [DEP-8] Run ADT regression suite for lowlatency kernels Jammy and later + (LP: #1999528) + - [DEP-8] Fix regression suite to run on lowlatency + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: do not add constraints on toolchain versions + + -- Andrea Righi Tue, 13 Dec 2022 16:45:59 +0100 + +linux (6.1.0-2.2) lunar; urgency=medium + + * lunar/linux: 6.1.0-2.2 -proposed tracker (LP: #1999411) + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: do not enforce toolchain versions + + -- Andrea Righi Mon, 12 Dec 2022 17:05:59 +0100 + +linux (6.1.0-1.1) lunar; urgency=medium + + * lunar/linux: 6.1.0-1.1 -proposed tracker (LP: #1999373) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: set and delete configs from command line + - [Packaging] migrateconfigs: ignore README.rst if it doesn't exist + - [Packaging] migrate-annotations: properly determine arches in derivatives + - [Packaging] annotations: allow to set note to config options directly + - [Packaging] annotations: assume --query as default command + - [Packaging] annotations: allow to query using CONFIG_