--- linux-6.14.0.orig/Documentation/admin-guide/gpio/gpio-aggregator.rst +++ linux-6.14.0/Documentation/admin-guide/gpio/gpio-aggregator.rst @@ -69,6 +69,113 @@ $ echo gpio-aggregator.0 > delete_device +Aggregating GPIOs using Configfs +-------------------------------- + +**Group:** ``/config/gpio-aggregator`` + + This is the root directory of the gpio-aggregator configfs tree. + +**Group:** ``/config/gpio-aggregator/`` + + This directory represents a GPIO aggregator device. You can assign any + name to ```` (e.g. ``agg0``), except names starting with + ``_sysfs`` prefix, which are reserved for auto-generated configfs + entries corresponding to devices created via Sysfs. + +**Attribute:** ``/config/gpio-aggregator//live`` + + The ``live`` attribute allows to trigger the actual creation of the device + once it's fully configured. Accepted values are: + + * ``1``, ``yes``, ``true`` : enable the virtual device + * ``0``, ``no``, ``false`` : disable the virtual device + +**Attribute:** ``/config/gpio-aggregator//dev_name`` + + The read-only ``dev_name`` attribute exposes the name of the device as it + will appear in the system on the platform bus (e.g. ``gpio-aggregator.0``). + This is useful for identifying a character device for the newly created + aggregator. If it's ``gpio-aggregator.0``, + ``/sys/devices/platform/gpio-aggregator.0/gpiochipX`` path tells you that the + GPIO device id is ``X``. + +You must create subdirectories for each virtual line you want to +instantiate, named exactly as ``line0``, ``line1``, ..., ``lineY``, when +you want to instantiate ``Y+1`` (Y >= 0) lines. Configure all lines before +activating the device by setting ``live`` to 1. + +**Group:** ``/config/gpio-aggregator///`` + + This directory represents a GPIO line to include in the aggregator. + +**Attribute:** ``/config/gpio-aggregator///key`` + +**Attribute:** ``/config/gpio-aggregator///offset`` + + The default values after creating the ```` directory are: + + * ``key`` : + * ``offset`` : -1 + + ``key`` must always be explicitly configured, while ``offset`` depends. + Two configuration patterns exist for each ````: + + (a). For lookup by GPIO line name: + + * Set ``key`` to the line name. + * Ensure ``offset`` remains -1 (the default). + + (b). For lookup by GPIO chip name and the line offset within the chip: + + * Set ``key`` to the chip name. + * Set ``offset`` to the line offset (0 <= ``offset`` < 65535). + +**Attribute:** ``/config/gpio-aggregator///name`` + + The ``name`` attribute sets a custom name for lineY. If left unset, the + line will remain unnamed. + +Once the configuration is done, the ``'live'`` attribute must be set to 1 +in order to instantiate the aggregator device. It can be set back to 0 to +destroy the virtual device. The module will synchronously wait for the new +aggregator device to be successfully probed and if this doesn't happen, writing +to ``'live'`` will result in an error. This is a different behaviour from the +case when you create it using sysfs ``new_device`` interface. + +.. note:: + + For aggregators created via Sysfs, the configfs entries are + auto-generated and appear as ``/config/gpio-aggregator/_sysfs./``. You + cannot add or remove line directories with mkdir(2)/rmdir(2). To modify + lines, you must use the "delete_device" interface to tear down the + existing device and reconfigure it from scratch. However, you can still + toggle the aggregator with the ``live`` attribute and adjust the + ``key``, ``offset``, and ``name`` attributes for each line when ``live`` + is set to 0 by hand (i.e. it's not waiting for deferred probe). + +Sample configuration commands +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + # Create a directory for an aggregator device + $ mkdir /sys/kernel/config/gpio-aggregator/agg0 + + # Configure each line + $ mkdir /sys/kernel/config/gpio-aggregator/agg0/line0 + $ echo gpiochip0 > /sys/kernel/config/gpio-aggregator/agg0/line0/key + $ echo 6 > /sys/kernel/config/gpio-aggregator/agg0/line0/offset + $ echo test0 > /sys/kernel/config/gpio-aggregator/agg0/line0/name + $ mkdir /sys/kernel/config/gpio-aggregator/agg0/line1 + $ echo gpiochip0 > /sys/kernel/config/gpio-aggregator/agg0/line1/key + $ echo 7 > /sys/kernel/config/gpio-aggregator/agg0/line1/offset + $ echo test1 > /sys/kernel/config/gpio-aggregator/agg0/line1/name + + # Activate the aggregator device + $ echo 1 > /sys/kernel/config/gpio-aggregator/agg0/live + + Generic GPIO Driver ------------------- --- linux-6.14.0.orig/Documentation/admin-guide/kernel-parameters.txt +++ linux-6.14.0/Documentation/admin-guide/kernel-parameters.txt @@ -4642,6 +4642,12 @@ nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to disable the use of MSI interrupts system-wide. + clearmsi [X86] Clears MSI/MSI-X enable bits early in boot + time in order to avoid issues like adapters + screaming irqs and preventing boot progress. + Also, it enforces the PCI Local Bus spec + rule that those bits should be 0 in system reset + events (useful for kexec/kdump cases). noioapicquirk [APIC] Disable all boot interrupt quirks. Safety option to keep boot IRQs enabled. This should never be necessary. --- linux-6.14.0.orig/Documentation/cgroups/namespace.txt +++ linux-6.14.0/Documentation/cgroups/namespace.txt @@ -0,0 +1,142 @@ + CGroup Namespaces + +CGroup Namespace provides a mechanism to virtualize the view of the +/proc//cgroup file. The CLONE_NEWCGROUP clone-flag can be used with +clone() and unshare() syscalls to create a new cgroup namespace. +The process running inside the cgroup namespace will have its /proc//cgroup +output restricted to cgroupns-root. cgroupns-root is the cgroup of the process +at the time of creation of the cgroup namespace. + +Prior to CGroup Namespace, the /proc//cgroup file used to show complete +path of the cgroup of a process. In a container setup (where a set of cgroups +and namespaces are intended to isolate processes), the /proc//cgroup file +may leak potential system level information to the isolated processes. + +For Example: + $ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1 + +The path '/batchjobs/container_id1' can generally be considered as system-data +and its desirable to not expose it to the isolated process. + +CGroup Namespaces can be used to restrict visibility of this path. +For Example: + # Before creating cgroup namespace + $ ls -l /proc/self/ns/cgroup + lrwxrwxrwx 1 root root 0 2014-07-15 10:37 /proc/self/ns/cgroup -> cgroup:[4026531835] + $ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1 + + # unshare(CLONE_NEWCGROUP) and exec /bin/bash + $ ~/unshare -c + [ns]$ ls -l /proc/self/ns/cgroup + lrwxrwxrwx 1 root root 0 2014-07-15 10:35 /proc/self/ns/cgroup -> cgroup:[4026532183] + # From within new cgroupns, process sees that its in the root cgroup + [ns]$ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/ + + # From global cgroupns: + $ cat /proc//cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1 + + # Unshare cgroupns along with userns and mountns + # Following calls unshare(CLONE_NEWCGROUP|CLONE_NEWUSER|CLONE_NEWNS), then + # sets up uid/gid map and execs /bin/bash + $ ~/unshare -c -u -m + # Originally, we were in /batchjobs/container_id1 cgroup. Mount our own cgroup + # hierarchy. + [ns]$ mount -t cgroup cgroup /tmp/cgroup + [ns]$ ls -l /tmp/cgroup + total 0 + -r--r--r-- 1 root root 0 2014-10-13 09:32 cgroup.controllers + -r--r--r-- 1 root root 0 2014-10-13 09:32 cgroup.populated + -rw-r--r-- 1 root root 0 2014-10-13 09:25 cgroup.procs + -rw-r--r-- 1 root root 0 2014-10-13 09:32 cgroup.subtree_control + +The cgroupns-root (/batchjobs/container_id1 in above example) becomes the +filesystem root for the namespace specific cgroupfs mount. + +The virtualization of /proc/self/cgroup file combined with restricting +the view of cgroup hierarchy by namespace-private cgroupfs mount +should provide a completely isolated cgroup view inside the container. + +In its current form, the cgroup namespaces patcheset provides following +behavior: + +(1) The 'cgroupns-root' for a cgroup namespace is the cgroup in which + the process calling unshare is running. + For ex. if a process in /batchjobs/container_id1 cgroup calls unshare, + cgroup /batchjobs/container_id1 becomes the cgroupns-root. + For the init_cgroup_ns, this is the real root ('/') cgroup + (identified in code as cgrp_dfl_root.cgrp). + +(2) The cgroupns-root cgroup does not change even if the namespace + creator process later moves to a different cgroup. + $ ~/unshare -c # unshare cgroupns in some cgroup + [ns]$ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/ + [ns]$ mkdir sub_cgrp_1 + [ns]$ echo 0 > sub_cgrp_1/cgroup.procs + [ns]$ cat /proc/self/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/sub_cgrp_1 + +(3) Each process gets its CGROUPNS specific view of /proc//cgroup +(a) Processes running inside the cgroup namespace will be able to see + cgroup paths (in /proc/self/cgroup) only inside their root cgroup + [ns]$ sleep 100000 & # From within unshared cgroupns + [1] 7353 + [ns]$ echo 7353 > sub_cgrp_1/cgroup.procs + [ns]$ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/sub_cgrp_1 + +(b) From global cgroupns, the real cgroup path will be visible: + $ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/batchjobs/container_id1/sub_cgrp_1 + +(c) From a sibling cgroupns (cgroupns root-ed at a different cgroup), cgroup + path relative to its own cgroupns-root will be shown: + # ns2's cgroupns-root is at '/batchjobs/container_id2' + [ns2]$ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/../container_id2/sub_cgrp_1 + + Note that the relative path always starts with '/' to indicate that its + relative to the cgroupns-root of the caller. + +(4) Processes inside a cgroupns can move in-and-out of the cgroupns-root + (if they have proper access to external cgroups). + # From inside cgroupns (with cgroupns-root at /batchjobs/container_id1), and + # assuming that the global hierarchy is still accessible inside cgroupns: + $ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/sub_cgrp_1 + $ echo 7353 > batchjobs/container_id2/cgroup.procs + $ cat /proc/7353/cgroup + 0:cpuset,cpu,cpuacct,memory,devices,freezer,hugetlb:/../container_id2 + + Note that this kind of setup is not encouraged. A task inside cgroupns + should only be exposed to its own cgroupns hierarchy. Otherwise it makes + the virtualization of /proc//cgroup less useful. + +(5) Setns to another cgroup namespace is allowed when: + (a) the process has CAP_SYS_ADMIN in its current userns + (b) the process has CAP_SYS_ADMIN in the target cgroupns' userns + No implicit cgroup changes happen with attaching to another cgroupns. It + is expected that the somone moves the attaching process under the target + cgroupns-root. + +(6) When some thread from a multi-threaded process unshares its + cgroup-namespace, the new cgroupns gets applied to the entire process (all + the threads). For the unified-hierarchy this is expected as it only allows + process-level containerization. For the legacy hierarchies this may be + unexpected. So all the threads in the process will have the same cgroup. + +(7) The cgroup namespace is alive as long as there is atleast 1 + process inside it. When the last process exits, the cgroup + namespace is destroyed. The cgroupns-root and the actual cgroups + remain though. + +(8) Namespace specific cgroup hierarchy can be mounted by a process running + inside cgroupns: + $ mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT + + This will mount the unified cgroup hierarchy with cgroupns-root as the + filesystem root. The process needs CAP_SYS_ADMIN in its userns and mntns. --- linux-6.14.0.orig/Documentation/devicetree/bindings/arm/qcom.yaml +++ linux-6.14.0/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1141,6 +1141,12 @@ - items: - enum: + - acer,swift-sf14-11 + - const: qcom,x1p64100 + - const: qcom,x1e80100 + + - items: + - enum: - qcom,x1p42100-crd - const: qcom,x1p42100 --- linux-6.14.0.orig/Documentation/devicetree/bindings/media/qcom,sm8350-venus.yaml +++ linux-6.14.0/Documentation/devicetree/bindings/media/qcom,sm8350-venus.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm8350-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Venus video encode and decode accelerators + +maintainers: + - Konrad Dybcio + +description: | + The Venus Iris2 IP is a video encode and decode accelerator present + on Qualcomm platforms + +allOf: + - $ref: qcom,venus-common.yaml# + +properties: + compatible: + enum: + - qcom,sc8280xp-venus + - qcom,sm8350-venus + + clocks: + maxItems: 3 + + clock-names: + items: + - const: iface + - const: core + - const: vcodec0_core + + resets: + maxItems: 1 + + reset-names: + items: + - const: core + + power-domains: + maxItems: 3 + + power-domain-names: + items: + - const: venus + - const: vcodec0 + - const: mx + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: cpu-cfg + - const: video-mem + - const: video-llcc + + operating-points-v2: true + opp-table: + type: object + + iommus: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - power-domain-names + - iommus + - video-decoder + - video-encoder + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + venus: video-codec@aa00000 { + compatible = "qcom,sm8350-venus"; + reg = <0x0aa00000 0x100000>; + interrupts = ; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "core"; + + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SM8350_MX>; + power-domain-names = "venus", + "vcodec0", + "mx"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "cpu-cfg", + "video-mem", + "video-llcc"; + + operating-points-v2 = <&venus_opp_table>; + iommus = <&apps_smmu 0x2100 0x400>; + memory-region = <&pil_video_mem>; + + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; --- linux-6.14.0.orig/Documentation/devicetree/bindings/platform/lenovo,yoga-slim7x-ec.yaml +++ linux-6.14.0/Documentation/devicetree/bindings/platform/lenovo,yoga-slim7x-ec.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/platform/lenovo,yoga-slim7x-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lenovo Yoga Slim 7x Embedded Controller. + +maintainers: + - Maya Matuszczyk + +description: + The Lenovo Yoga Slim 7x has an EC which handles some minor functions, like + power LED or some special keys on the keyboard. This bindings describes + how it is connected + +properties: + compatible: + const: lenovo,yoga-slim7x-ec + + reg: + const: 0x76 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - |+ + #include + i2c5 { + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@76 { + compatible = "lenovo,yoga-slim7x-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... --- linux-6.14.0.orig/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml +++ linux-6.14.0/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml @@ -50,6 +50,11 @@ items: - const: offset + qcom,no-alarm: + type: boolean + description: + RTC alarm is not owned by the OS + wakeup-source: true required: --- linux-6.14.0.orig/Documentation/devicetree/bindings/usb/parade,ps8830.yaml +++ linux-6.14.0/Documentation/devicetree/bindings/usb/parade,ps8830.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/parade,ps8830.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parade PS883x USB and DisplayPort Retimer + +maintainers: + - Abel Vesa + +properties: + compatible: + enum: + - parade,ps8830 + + reg: + maxItems: 1 + + clocks: + items: + - description: XO Clock + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: power supply (1.07V) + + vdd33-supply: + description: power supply (3.3V) + + vdd33-cap-supply: + description: power supply (3.3V) + + vddar-supply: + description: power supply (1.07V) + + vddat-supply: + description: power supply (1.07V) + + vddio-supply: + description: power supply (1.2V or 1.8V) + + orientation-switch: true + retimer-switch: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - clocks + - reset-gpios + - vdd-supply + - vdd33-supply + - vdd33-cap-supply + - vddat-supply + - vddio-supply + - orientation-switch + - retimer-switch + +allOf: + - $ref: usb-switch.yaml# + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&clk_rtmr_xo>; + + vdd-supply = <&vreg_rtmr_1p15>; + vdd33-supply = <&vreg_rtmr_3p3>; + vdd33-cap-supply = <&vreg_rtmr_3p3>; + vddar-supply = <&vreg_rtmr_1p15>; + vddat-supply = <&vreg_rtmr_1p15>; + vddio-supply = <&vreg_rtmr_1p8>; + + reset-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&usb_phy_ss>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... --- linux-6.14.0.orig/Documentation/sphinx/cdomain.py +++ linux-6.14.0/Documentation/sphinx/cdomain.py @@ -37,12 +37,29 @@ import sphinx from sphinx import addnodes -from sphinx.domains.c import c_funcptr_sig_re, c_sig_re from sphinx.domains.c import CObject as Base_CObject from sphinx.domains.c import CDomain as Base_CDomain from itertools import chain import re +# fixes https://github.com/sphinx-doc/sphinx/commit/0f49e30c51b5cc5055cda5b4b294c2dd9d1df573#r38750737 + +# pylint: disable=invalid-name +c_sig_re = re.compile( + r'''^([^(]*?) # return type + ([\w:.]+) \s* # thing name (colon allowed for C++) + (?: \((.*)\) )? # optionally arguments + (\s+const)? $ # const specifier + ''', re.VERBOSE) + +c_funcptr_sig_re = re.compile( + r'''^([^(]+?) # return type + (\( [^()]+ \)) \s* # name in parentheses + \( (.*) \) # arguments + (\s+const)? $ # const specifier + ''', re.VERBOSE) +# pylint: enable=invalid-name + __version__ = '1.1' # Get Sphinx version --- linux-6.14.0.orig/Kbuild +++ linux-6.14.0/Kbuild @@ -97,3 +97,4 @@ obj-$(CONFIG_NET) += net/ obj-y += virt/ obj-y += $(ARCH_DRIVERS) +obj-y += ubuntu/ --- linux-6.14.0.orig/Kconfig +++ linux-6.14.0/Kconfig @@ -19,6 +19,8 @@ source "drivers/Kconfig" +source "ubuntu/Kconfig" + source "fs/Kconfig" source "security/Kconfig" --- linux-6.14.0.orig/MAINTAINERS +++ linux-6.14.0/MAINTAINERS @@ -199,6 +199,18 @@ F: Documentation/devicetree/bindings/power/supply/*ab8500* F: drivers/power/supply/*ab8500* +AAEON DEVICE DRIVER WITH WMI INTERFACE +M: Edward Lin +M: Kunyang Fan +M: Frank Hsieh +M: Jacob Wu +S: Supported +F: drivers/gpio/gpio-aaeon.c +F: drivers/hwmon/hwmon-aaeon.c +F: drivers/leds/leds-aaeon.c +F: drivers/mfd/mfd-aaeon.c +F: drivers/watchdog/wdt_aaeon.c + ABI/API L: linux-api@vger.kernel.org F: include/linux/syscalls.h @@ -13151,6 +13163,12 @@ W: http://legousb.sourceforge.net/ F: drivers/usb/misc/legousbtower.c +LENOVO YOGA SLIM 7X EC DRIVER +M: Maya Matuszczyk +S: Maintained +F: Documentation/devicetree/bindings/platform/lenovo,yoga-slim7x-ec.yaml +F: drivers/platform/arm64/lenovo-yoga-slim7x.c + LETSKETCH HID TABLET DRIVER M: Hans de Goede L: linux-input@vger.kernel.org @@ -25989,8 +26007,7 @@ F: include/xen/swiotlb-xen.h XFS FILESYSTEM -M: Carlos Maiolino -R: Darrick J. Wong +M: Darrick J. Wong L: linux-xfs@vger.kernel.org S: Supported W: http://xfs.org/ --- linux-6.14.0.orig/Makefile +++ linux-6.14.0/Makefile @@ -573,6 +573,9 @@ -I$(objtree)/include \ $(USERINCLUDE) +# UBUNTU: Include our third party driver stuff too +LINUXINCLUDE += -I$(srctree)/ubuntu/include + KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE KBUILD_CFLAGS := @@ -1348,8 +1351,9 @@ quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include cmd_headers_install = \ mkdir -p $(INSTALL_HDR_PATH); \ - rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ - usr/include $(INSTALL_HDR_PATH) + find usr/include -type f -name '*.h' -print0 | \ + tar -czf - --null --no-recursion --no-wildcards-match-slash -T- | \ + tar -xzf - --strip-components=1 -C $(INSTALL_HDR_PATH) PHONY += headers_install headers_install: headers @@ -1364,6 +1368,7 @@ $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML)) $(Q)$(MAKE) $(hdr-inst)=include/uapi $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi + $(Q)$(MAKE) $(hdr-inst)=ubuntu/include dst=include oldheaders= ifdef CONFIG_HEADERS_INSTALL prepare: headers @@ -1569,7 +1574,7 @@ # Directories & files removed with 'make mrproper' MRPROPER_FILES += include/config include/generated \ arch/$(SRCARCH)/include/generated .objdiff \ - debian snap tar-install PKGBUILD pacman \ + snap tar-install PKGBUILD pacman \ .config .config.old .version \ Module.symvers \ certs/signing_key.pem \ --- linux-6.14.0.orig/Ubuntu.md +++ linux-6.14.0/Ubuntu.md @@ -0,0 +1,8 @@ +Name: linux +Version: 6.11.0 +Series: 24.10 (oracular) +Description: + This is the source code for the Ubuntu linux kernel for the 24.10 series. This + source tree is used to produce the flavours: generic, generic-64k, generic-lpae. + This kernel is configured to support the widest range of desktop, laptop and + server configurations. --- linux-6.14.0.orig/arch/arm/Makefile +++ linux-6.14.0/arch/arm/Makefile @@ -59,6 +59,9 @@ # KBUILD_CFLAGS += $(call cc-option,-fno-ipa-sra) +# Need -msoft-float for gcc 11 for the below instruction set selection +KBUILD_CFLAGS += -msoft-float + # This selects which instruction set is used. arch-$(CONFIG_CPU_32v7M) :=-march=armv7-m arch-$(CONFIG_CPU_32v7) :=-march=armv7-a @@ -148,7 +151,7 @@ # Need -Uarm for gcc < 3.x KBUILD_CPPFLAGS +=$(cpp-y) -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -Uarm KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ --- linux-6.14.0.orig/arch/arm64/Kconfig +++ linux-6.14.0/arch/arm64/Kconfig @@ -1627,7 +1627,7 @@ # 64K | 29 | 16 | 13 | 13 | config ARCH_FORCE_MAX_ORDER int - default "13" if ARM64_64K_PAGES + default "13" if ARM64_64K_PAGES || (ARCH_THUNDER && ARM64_4K_PAGES) default "11" if ARM64_16K_PAGES default "10" help --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/Makefile +++ linux-6.14.0/arch/arm64/boot/dts/qcom/Makefile @@ -298,3 +298,5 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1p64100-acer-swift-sf14-11.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -1090,20 +1090,9 @@ }; &pmk8280_rtc { - nvmem-cells = <&rtc_offset>; - nvmem-cell-names = "offset"; - status = "okay"; }; -&pmk8280_sdam_6 { - status = "okay"; - - rtc_offset: rtc-offset@bc { - reg = <0xbc 0x4>; - }; -}; - &pmk8280_vadc { channel@144 { reg = ; @@ -1477,6 +1466,11 @@ status = "okay"; }; +&venus { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcvss8280.mbn"; + status = "okay"; +}; + &wsamacro { status = "okay"; }; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ linux-6.14.0/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -690,6 +691,11 @@ no-map; }; + pil_video_mem: pil_video_region@86700000 { + reg = <0 0x86700000 0 0x500000>; + no-map; + }; + pil_adsp_mem: adsp-region@86c00000 { reg = <0 0x86c00000 0 0x2000000>; no-map; @@ -3699,6 +3705,86 @@ }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sm8350-venus"; + reg = <0 0x0aa00000 0 0x100000>; + interrupts = ; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC8280XP_MX>; + power-domain-names = "venus", + "vcodec0", + "mx"; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "cpu-cfg", + "video-mem", + "video-llcc"; + + operating-points-v2 = <&venus_opp_table>; + iommus = <&apps_smmu 0x2e00 0x400>; + memory-region = <&pil_video_mem>; + + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1098000000 { + opp-hz = /bits/ 64 <1098000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-1332000000 { + opp-hz = /bits/ 64 <1332000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + videocc: clock-controller@abf0000 { + compatible = "qcom,sc8280xp-videocc"; + reg = <0 0x0abf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac4a000 { compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci"; reg = <0 0x0ac4a000 0 0x1000>; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -0,0 +1,1277 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include + +#include "x1e80100-pmics.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. X1E80100 CRD"; + compatible = "qcom,x1e80100-crd", "qcom,x1e80100"; + + aliases { + serial0 = &uart21; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>, + <&tlmm 125 GPIO_ACTIVE_HIGH>; + + /* Left-side rear port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side front port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + + /* Right-side port */ + connector@2 { + compatible = "usb-c-connector"; + reg = <2>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss2_hs_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss2_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-CRD"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "SDX_VPH_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wwan_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = ; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = ; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = ; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = ; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = ; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = ; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "samsung,atna45af01", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie5 { + perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-0 = <&pcie5_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie5_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie6a_default>; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-disable; + output-enable; + drive-push-pull; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = ; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; /* 1.8V */ + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status = "okay"; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie5_default: pcie5-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie5_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio149"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wwan_sw_en: wwan-sw-en-state { + pins = "gpio221"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_2_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss2_dwc3_hs { + remote-endpoint = <&pmic_glink_ss2_hs_in>; +}; + +&usb_1_ss2_qmpphy_out { + remote-endpoint = <&pmic_glink_ss2_ss_in>; +}; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -507,6 +507,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -528,6 +529,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { @@ -786,7 +788,7 @@ vddat-supply = <&vreg_rtmr2_1p15>; vddio-supply = <&vreg_rtmr2_1p8>; - reset-gpios = <&tlmm 185 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>; orientation-switch; retimer-switch; @@ -841,7 +843,7 @@ vddat-supply = <&vreg_rtmr0_1p15>; vddio-supply = <&vreg_rtmr0_1p8>; - reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; retimer-switch; orientation-switch; @@ -896,7 +898,7 @@ vddat-supply = <&vreg_rtmr1_1p15>; vddio-supply = <&vreg_rtmr1_1p8>; - reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; retimer-switch; orientation-switch; @@ -942,6 +944,7 @@ &mdss_dp0_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp1 { @@ -950,6 +953,7 @@ &mdss_dp1_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp2 { @@ -958,6 +962,7 @@ &mdss_dp2_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &pcie4 { --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include #include "x1e80100.dtsi" @@ -19,6 +20,10 @@ compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100"; chassis-type = "laptop"; + aliases { + serial1 = &uart14; + }; + wcd938x: audio-codec { compatible = "qcom,wcd9385-codec"; @@ -45,6 +50,16 @@ #sound-dai-cells = <1>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + gpio-keys { compatible = "gpio-keys"; @@ -92,7 +107,15 @@ reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -121,7 +144,15 @@ reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -153,6 +184,39 @@ regulator-boot-on; }; + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -169,6 +233,102 @@ regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -180,6 +340,48 @@ regulator-boot-on; }; + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the CRD mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + sound { compatible = "qcom,x1e80100-sndcard"; model = "X1E80100-LENOVO-Thinkpad-T14s"; @@ -258,6 +460,65 @@ }; }; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -344,6 +605,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -365,6 +627,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { @@ -578,6 +841,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -589,6 +855,9 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l12b_1p2>; + wakeup-source; }; @@ -600,6 +869,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&kybd_default>; pinctrl-names = "default"; @@ -607,6 +879,63 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + &i2c5 { clock-frequency = <400000>; @@ -655,6 +984,64 @@ }; }; +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + + }; + }; +}; + &i2c8 { clock-frequency = <400000>; @@ -668,6 +1055,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_l15b_1p8>; + pinctrl-0 = <&ts0_default>; pinctrl-names = "default"; }; @@ -697,6 +1087,24 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { compatible = "qcom,x1e80100-dp"; /delete-property/ #sound-dai-cells; @@ -706,11 +1114,9 @@ aux-bus { panel { compatible = "edp-panel"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_3p3>; - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; + backlight = <&backlight>; port { edp_panel_in: endpoint { @@ -758,6 +1164,23 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -777,6 +1200,50 @@ status = "okay"; }; +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + bias-disable; + drive-push-pull; + input-disable; + output-enable; + power-source = <1>; /* 1.8 V */ + qcom,drive-strength = ; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -785,6 +1252,34 @@ input-disable; output-enable; }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; + +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; }; &qupv3_0 { @@ -1007,6 +1502,34 @@ }; }; + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio191"; function = "gpio"; @@ -1014,6 +1537,37 @@ bias-disable; output-low; }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; }; &usb_1_ss0_hsphy { @@ -1045,7 +1599,7 @@ }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -1077,7 +1631,7 @@ }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; }; &usb_2 { --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -19,6 +19,10 @@ compatible = "asus,vivobook-s15", "qcom,x1e80100"; chassis-type = "laptop"; + aliases { + serial1 = &uart14; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&hall_int_n_default>; @@ -65,7 +69,15 @@ reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -94,7 +106,15 @@ reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -143,6 +163,102 @@ regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -153,6 +269,101 @@ regulator-always-on; regulator-boot-on; }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -192,12 +403,33 @@ regulator-initial-mode = ; }; + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + vreg_l14b_3p0: ldo14 { regulator-name = "vreg_l14b_3p0"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; }; regulators-1 { @@ -209,6 +441,13 @@ vdd-l3-supply = <&vreg_s1f_0p7>; vdd-s4-supply = <&vph_pwr>; + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + vreg_s4c_1p8: smps4 { regulator-name = "vreg_s4c_1p8"; regulator-min-microvolt = <1856000>; @@ -370,18 +609,61 @@ }; }; -&i2c1 { +&i2c3 { clock-frequency = <400000>; status = "okay"; - /* PS8830 USB4 Retimer? @ 0x8 */ -}; + /* Left-side USB Type-C port, closer to the screen */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; -&i2c3 { - clock-frequency = <400000>; - status = "okay"; + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; - /* PS8830 USB4 Retimer? @ 0x8 */ + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; }; &i2c5 { @@ -401,20 +683,131 @@ wakeup-source; }; - /* EC? @ 0x5b, 0x76 */ + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; + + /* EC @ 0x76 */ }; &i2c7 { clock-frequency = <400000>; status = "okay"; - /* PS8830 USB4 Retimer? @ 0x8 */ + /* Left-side USB Type-C port, farther from the screen */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + + }; + }; }; &mdss { status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { compatible = "qcom,x1e80100-dp"; /delete-property/ #sound-dai-cells; @@ -476,6 +869,23 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -495,6 +905,28 @@ status = "okay"; }; +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; + + rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&pm8550ve_9_gpios { + rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -507,6 +939,14 @@ }; }; +&pmc8380_5_gpios { + rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &qupv3_0 { status = "okay"; }; @@ -563,6 +1003,30 @@ bias-disable; }; + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-low; + }; + hall_int_n_default: hall-int-n-state { pins = "gpio92"; function = "gpio"; @@ -628,11 +1092,77 @@ }; }; + rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; bias-disable; }; + + wcn_bt_en: wcn-bt-en-state { + pins = "gpio116"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wcn_wlan_en: wcn-wlan-en-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; }; &usb_1_ss0_hsphy { @@ -664,7 +1194,7 @@ }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -696,5 +1226,58 @@ }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb5_repeater>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; }; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -5,1278 +5,14 @@ /dts-v1/; -#include -#include -#include -#include -#include - #include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "x1-crd.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 CRD"; compatible = "qcom,x1e80100-crd", "qcom,x1e80100"; - - aliases { - serial0 = &uart21; - }; - - wcd938x: audio-codec { - compatible = "qcom,wcd9385-codec"; - - pinctrl-names = "default"; - pinctrl-0 = <&wcd_default>; - - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - - reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; - - vdd-buck-supply = <&vreg_l15b_1p8>; - vdd-rxtx-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l15b_1p8>; - vdd-mic-bias-supply = <&vreg_bob1>; - - #sound-dai-cells = <1>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&hall_int_n_default>; - pinctrl-names = "default"; - - switch-lid { - gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; - linux,input-type = ; - linux,code = ; - wakeup-source; - wakeup-event-action = ; - }; - }; - - pmic-glink { - compatible = "qcom,x1e80100-pmic-glink", - "qcom,sm8550-pmic-glink", - "qcom,pmic-glink"; - #address-cells = <1>; - #size-cells = <0>; - orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, - <&tlmm 123 GPIO_ACTIVE_HIGH>, - <&tlmm 125 GPIO_ACTIVE_HIGH>; - - /* Left-side rear port */ - connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss0_hs_in: endpoint { - remote-endpoint = <&usb_1_ss0_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; - }; - }; - }; - }; - - /* Left-side front port */ - connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss1_hs_in: endpoint { - remote-endpoint = <&usb_1_ss1_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; - }; - }; - }; - }; - - /* Right-side port */ - connector@2 { - compatible = "usb-c-connector"; - reg = <2>; - power-role = "dual"; - data-role = "dual"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - pmic_glink_ss2_hs_in: endpoint { - remote-endpoint = <&usb_1_ss2_dwc3_hs>; - }; - }; - - port@1 { - reg = <1>; - - pmic_glink_ss2_ss_in: endpoint { - remote-endpoint = <&usb_1_ss2_qmpphy_out>; - }; - }; - }; - }; - }; - - reserved-memory { - linux,cma { - compatible = "shared-dma-pool"; - size = <0x0 0x8000000>; - reusable; - linux,cma-default; - }; - }; - - sound { - compatible = "qcom,x1e80100-sndcard"; - model = "X1E80100-CRD"; - audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", - "TweeterLeft IN", "WSA WSA_SPK2 OUT", - "WooferRight IN", "WSA2 WSA_SPK2 OUT", - "TweeterRight IN", "WSA2 WSA_SPK2 OUT", - "IN1_HPHL", "HPHL_OUT", - "IN2_HPHR", "HPHR_OUT", - "AMIC2", "MIC BIAS2", - "VA DMIC0", "MIC BIAS3", - "VA DMIC1", "MIC BIAS3", - "VA DMIC2", "MIC BIAS1", - "VA DMIC3", "MIC BIAS1", - "VA DMIC0", "VA MIC BIAS3", - "VA DMIC1", "VA MIC BIAS3", - "VA DMIC2", "VA MIC BIAS1", - "VA DMIC3", "VA MIC BIAS1", - "TX SWR_INPUT1", "ADC2_OUTPUT"; - - wcd-playback-dai-link { - link-name = "WCD Playback"; - - cpu { - sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; - }; - - codec { - sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - wcd-capture-dai-link { - link-name = "WCD Capture"; - - cpu { - sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; - }; - - codec { - sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - wsa-dai-link { - link-name = "WSA Playback"; - - cpu { - sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; - }; - - codec { - sound-dai = <&left_woofer>, <&left_tweeter>, - <&swr0 0>, <&lpass_wsamacro 0>, - <&right_woofer>, <&right_tweeter>, - <&swr3 0>, <&lpass_wsa2macro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - va-dai-link { - link-name = "VA Capture"; - - cpu { - sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; - }; - - codec { - sound-dai = <&lpass_vamacro 0>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - }; - - vreg_edp_3p3: regulator-edp-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_EDP_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&edp_reg_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; - - vreg_misc_3p3: regulator-misc-3p3 { - compatible = "regulator-fixed"; - - regulator-name = "VREG_MISC_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&misc_3p3_reg_en>; - - regulator-boot-on; - regulator-always-on; - }; - - vreg_nvme: regulator-nvme { - compatible = "regulator-fixed"; - - regulator-name = "VREG_NVME_3P3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&nvme_reg_en>; - - regulator-boot-on; - }; - - vph_pwr: regulator-vph-pwr { - compatible = "regulator-fixed"; - - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - - regulator-always-on; - regulator-boot-on; - }; - - vreg_wwan: regulator-wwan { - compatible = "regulator-fixed"; - - regulator-name = "SDX_VPH_PWR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&wwan_sw_en>; - pinctrl-names = "default"; - - regulator-boot-on; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm8550-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob1-supply = <&vph_pwr>; - vdd-bob2-supply = <&vph_pwr>; - vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; - vdd-l2-l13-l14-supply = <&vreg_bob1>; - vdd-l5-l16-supply = <&vreg_bob1>; - vdd-l6-l7-supply = <&vreg_bob2>; - vdd-l8-l9-supply = <&vreg_bob1>; - vdd-l12-supply = <&vreg_s5j_1p2>; - vdd-l15-supply = <&vreg_s4c_1p8>; - vdd-l17-supply = <&vreg_bob2>; - - vreg_bob1: bob1 { - regulator-name = "vreg_bob1"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = ; - }; - - vreg_bob2: bob2 { - regulator-name = "vreg_bob2"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = ; - }; - - vreg_l1b_1p8: ldo1 { - regulator-name = "vreg_l1b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l2b_3p0: ldo2 { - regulator-name = "vreg_l2b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = ; - }; - - vreg_l4b_1p8: ldo4 { - regulator-name = "vreg_l4b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l5b_3p0: ldo5 { - regulator-name = "vreg_l5b_3p0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = ; - }; - - vreg_l6b_1p8: ldo6 { - regulator-name = "vreg_l6b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l7b_2p8: ldo7 { - regulator-name = "vreg_l7b_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-initial-mode = ; - }; - - vreg_l8b_3p0: ldo8 { - regulator-name = "vreg_l8b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = ; - }; - - vreg_l9b_2p9: ldo9 { - regulator-name = "vreg_l9b_2p9"; - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l10b_1p8: ldo10 { - regulator-name = "vreg_l10b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l12b_1p2: ldo12 { - regulator-name = "vreg_l12b_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l13b_3p0: ldo13 { - regulator-name = "vreg_l13b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3100000>; - regulator-initial-mode = ; - }; - - vreg_l14b_3p0: ldo14 { - regulator-name = "vreg_l14b_3p0"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = ; - }; - - vreg_l15b_1p8: ldo15 { - regulator-name = "vreg_l15b_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l16b_2p9: ldo16 { - regulator-name = "vreg_l16b_2p9"; - regulator-min-microvolt = <2912000>; - regulator-max-microvolt = <2912000>; - regulator-initial-mode = ; - }; - - vreg_l17b_2p5: ldo17 { - regulator-name = "vreg_l17b_2p5"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = ; - }; - }; - - regulators-1 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s4-supply = <&vph_pwr>; - - vreg_s4c_1p8: smps4 { - regulator-name = "vreg_s4c_1p8"; - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - }; - - vreg_l1c_1p2: ldo1 { - regulator-name = "vreg_l1c_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l2c_0p8: ldo2 { - regulator-name = "vreg_l2c_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - - vreg_l3c_0p8: ldo3 { - regulator-name = "vreg_l3c_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - }; - - regulators-2 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "d"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s4c_1p8>; - vdd-s1-supply = <&vph_pwr>; - - vreg_l1d_0p8: ldo1 { - regulator-name = "vreg_l1d_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - - vreg_l2d_0p9: ldo2 { - regulator-name = "vreg_l2d_0p9"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - - vreg_l3d_1p8: ldo3 { - regulator-name = "vreg_l3d_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - }; - - regulators-3 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "e"; - - vdd-l2-supply = <&vreg_s1f_0p7>; - vdd-l3-supply = <&vreg_s5j_1p2>; - - vreg_l2e_0p8: ldo2 { - regulator-name = "vreg_l2e_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - - vreg_l3e_1p2: ldo3 { - regulator-name = "vreg_l3e_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - }; - - regulators-4 { - compatible = "qcom,pmc8380-rpmh-regulators"; - qcom,pmic-id = "f"; - - vdd-l1-supply = <&vreg_s5j_1p2>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s5j_1p2>; - vdd-s1-supply = <&vph_pwr>; - - vreg_s1f_0p7: smps1 { - regulator-name = "vreg_s1f_0p7"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = ; - }; - - vreg_l1f_1p0: ldo1 { - regulator-name = "vreg_l1f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = ; - }; - - vreg_l2f_1p0: ldo2 { - regulator-name = "vreg_l2f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = ; - }; - - vreg_l3f_1p0: ldo3 { - regulator-name = "vreg_l3f_1p0"; - regulator-min-microvolt = <1024000>; - regulator-max-microvolt = <1024000>; - regulator-initial-mode = ; - }; - }; - - regulators-6 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "i"; - - vdd-l1-supply = <&vreg_s4c_1p8>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - - vreg_s1i_0p9: smps1 { - regulator-name = "vreg_s1i_0p9"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - - vreg_s2i_1p0: smps2 { - regulator-name = "vreg_s2i_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = ; - }; - - vreg_l1i_1p8: ldo1 { - regulator-name = "vreg_l1i_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l2i_1p2: ldo2 { - regulator-name = "vreg_l2i_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l3i_0p8: ldo3 { - regulator-name = "vreg_l3i_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - }; - - regulators-7 { - compatible = "qcom,pm8550ve-rpmh-regulators"; - qcom,pmic-id = "j"; - - vdd-l1-supply = <&vreg_s1f_0p7>; - vdd-l2-supply = <&vreg_s5j_1p2>; - vdd-l3-supply = <&vreg_s1f_0p7>; - vdd-s5-supply = <&vph_pwr>; - - vreg_s5j_1p2: smps5 { - regulator-name = "vreg_s5j_1p2"; - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l1j_0p8: ldo1 { - regulator-name = "vreg_l1j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - - vreg_l2j_1p2: ldo2 { - regulator-name = "vreg_l2j_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l3j_0p8: ldo3 { - regulator-name = "vreg_l3j_0p8"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = ; - }; - }; -}; - -&gpu { - status = "okay"; - - zap-shader { - firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; - }; -}; - -&i2c0 { - clock-frequency = <400000>; - - status = "okay"; - - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l12b_1p2>; - - pinctrl-0 = <&tpad_default>; - pinctrl-names = "default"; - - wakeup-source; - }; - - keyboard@3a { - compatible = "hid-over-i2c"; - reg = <0x3a>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l12b_1p2>; - - pinctrl-0 = <&kybd_default>; - pinctrl-names = "default"; - - wakeup-source; - }; -}; - -&i2c8 { - clock-frequency = <400000>; - - status = "okay"; - - touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; - - vdd-supply = <&vreg_misc_3p3>; - vddl-supply = <&vreg_l15b_1p8>; - - pinctrl-0 = <&ts0_default>; - pinctrl-names = "default"; - }; -}; - -&lpass_tlmm { - spkr_01_sd_n_active: spkr-01-sd-n-active-state { - pins = "gpio12"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; - - spkr_23_sd_n_active: spkr-23-sd-n-active-state { - pins = "gpio13"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; -}; - -&lpass_vamacro { - pinctrl-0 = <&dmic01_default>, <&dmic23_default>; - pinctrl-names = "default"; - - vdd-micb-supply = <&vreg_l1b_1p8>; - qcom,dmic-sample-rate = <4800000>; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dp3 { - compatible = "qcom,x1e80100-dp"; - /delete-property/ #sound-dai-cells; - - status = "okay"; - - aux-bus { - panel { - compatible = "samsung,atna45af01", "samsung,atna33xc20"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - power-supply = <&vreg_edp_3p3>; - - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; - - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss_dp3_out>; - }; - }; - }; - }; - - ports { - port@1 { - reg = <1>; - mdss_dp3_out: endpoint { - data-lanes = <0 1 2 3>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; - - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -}; - -&mdss_dp3_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - - pinctrl-0 = <&pcie4_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie4_phy { - vdda-phy-supply = <&vreg_l3i_0p8>; - vdda-pll-supply = <&vreg_l3e_1p2>; - - status = "okay"; -}; - -&pcie5 { - perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; - - vddpe-3v3-supply = <&vreg_wwan>; - - pinctrl-0 = <&pcie5_default>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie5_phy { - vdda-phy-supply = <&vreg_l3i_0p8>; - vdda-pll-supply = <&vreg_l3e_1p2>; - - status = "okay"; -}; - -&pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - - vddpe-3v3-supply = <&vreg_nvme>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie6a_default>; - - status = "okay"; -}; - -&pcie6a_phy { - vdda-phy-supply = <&vreg_l1d_0p8>; - vdda-pll-supply = <&vreg_l2j_1p2>; - - status = "okay"; -}; - -&pm8550ve_8_gpios { - misc_3p3_reg_en: misc-3p3-reg-en-state { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-disable; - output-enable; - drive-push-pull; - power-source = <1>; /* 1.8 V */ - qcom,drive-strength = ; - }; -}; - -&pmc8380_3_gpios { - edp_bl_en: edp-bl-en-state { - pins = "gpio4"; - function = "normal"; - power-source = <1>; /* 1.8V */ - input-disable; - output-enable; - }; -}; - -&qupv3_0 { - status = "okay"; -}; - -&qupv3_1 { - status = "okay"; -}; - -&qupv3_2 { - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/x1e80100/adsp.mbn", - "qcom/x1e80100/adsp_dtb.mbn"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/x1e80100/cdsp.mbn", - "qcom/x1e80100/cdsp_dtb.mbn"; - - status = "okay"; -}; - -&smb2360_0 { - status = "okay"; -}; - -&smb2360_0_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l2b_3p0>; -}; - -&smb2360_1 { - status = "okay"; -}; - -&smb2360_1_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l14b_3p0>; -}; - -&smb2360_2 { - status = "okay"; -}; - -&smb2360_2_eusb2_repeater { - vdd18-supply = <&vreg_l3d_1p8>; - vdd3-supply = <&vreg_l8b_3p0>; -}; - -&swr0 { - status = "okay"; - - pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; - pinctrl-names = "default"; - - /* WSA8845, Left Woofer */ - left_woofer: speaker@0,0 { - compatible = "sdw20217020400"; - reg = <0 0>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "WooferLeft"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <1 2 3 7 10 13>; - }; - - /* WSA8845, Left Tweeter */ - left_tweeter: speaker@0,1 { - compatible = "sdw20217020400"; - reg = <0 1>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "TweeterLeft"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <4 5 6 7 11 13>; - }; -}; - -&swr1 { - status = "okay"; - - /* WCD9385 RX */ - wcd_rx: codec@0,4 { - compatible = "sdw20217010d00"; - reg = <0 4>; - qcom,rx-port-mapping = <1 2 3 4 5>; - }; -}; - -&swr2 { - status = "okay"; - - /* WCD9385 TX */ - wcd_tx: codec@0,3 { - compatible = "sdw20217010d00"; - reg = <0 3>; - qcom,tx-port-mapping = <2 2 3 4>; - }; -}; - -&swr3 { - status = "okay"; - - pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; - pinctrl-names = "default"; - - /* WSA8845, Right Woofer */ - right_woofer: speaker@0,0 { - compatible = "sdw20217020400"; - reg = <0 0>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "WooferRight"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <1 2 3 7 10 13>; - }; - - /* WSA8845, Right Tweeter */ - right_tweeter: speaker@0,1 { - compatible = "sdw20217020400"; - reg = <0 1>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - sound-name-prefix = "TweeterRight"; - vdd-1p8-supply = <&vreg_l15b_1p8>; - vdd-io-supply = <&vreg_l12b_1p2>; - qcom,port-mapping = <4 5 6 7 11 13>; - }; -}; - -&tlmm { - gpio-reserved-ranges = <34 2>, /* Unused */ - <44 4>, /* SPI (TPM) */ - <238 1>; /* UFS Reset */ - - edp_reg_en: edp-reg-en-state { - pins = "gpio70"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - hall_int_n_default: hall-int-n-state { - pins = "gpio92"; - function = "gpio"; - bias-disable; - }; - - kybd_default: kybd-default-state { - pins = "gpio67"; - function = "gpio"; - bias-disable; - }; - - nvme_reg_en: nvme-reg-en-state { - pins = "gpio18"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - pcie4_default: pcie4-default-state { - clkreq-n-pins { - pins = "gpio147"; - function = "pcie4_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio146"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio148"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie5_default: pcie5-default-state { - clkreq-n-pins { - pins = "gpio150"; - function = "pcie5_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio149"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio151"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie6a_default: pcie6a-default-state { - clkreq-n-pins { - pins = "gpio153"; - function = "pcie6a_clk"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-n-pins { - pins = "gpio152"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-n-pins { - pins = "gpio154"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - tpad_default: tpad-default-state { - pins = "gpio3"; - function = "gpio"; - bias-disable; - }; - - ts0_default: ts0-default-state { - int-n-pins { - pins = "gpio51"; - function = "gpio"; - bias-disable; - }; - - reset-n-pins { - pins = "gpio48"; - function = "gpio"; - output-high; - drive-strength = <16>; - }; - }; - - wcd_default: wcd-reset-n-active-state { - pins = "gpio191"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; - - wwan_sw_en: wwan-sw-en-state { - pins = "gpio221"; - function = "gpio"; - drive-strength = <4>; - bias-disable; - }; -}; - -&uart21 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&usb_1_ss0_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_0_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss0_qmpphy { - vdda-phy-supply = <&vreg_l2j_1p2>; - vdda-pll-supply = <&vreg_l1j_0p8>; - - status = "okay"; -}; - -&usb_1_ss0 { - status = "okay"; -}; - -&usb_1_ss0_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss0_dwc3_hs { - remote-endpoint = <&pmic_glink_ss0_hs_in>; -}; - -&usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; -}; - -&usb_1_ss1_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_1_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss1_qmpphy { - vdda-phy-supply = <&vreg_l2j_1p2>; - vdda-pll-supply = <&vreg_l2d_0p9>; - - status = "okay"; -}; - -&usb_1_ss1 { - status = "okay"; -}; - -&usb_1_ss1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss1_dwc3_hs { - remote-endpoint = <&pmic_glink_ss1_hs_in>; -}; - -&usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; -}; - -&usb_1_ss2_hsphy { - vdd-supply = <&vreg_l3j_0p8>; - vdda12-supply = <&vreg_l2j_1p2>; - - phys = <&smb2360_2_eusb2_repeater>; - - status = "okay"; -}; - -&usb_1_ss2_qmpphy { - vdda-phy-supply = <&vreg_l2j_1p2>; - vdda-pll-supply = <&vreg_l2d_0p9>; - - status = "okay"; -}; - -&usb_1_ss2 { - status = "okay"; -}; - -&usb_1_ss2_dwc3 { - dr_mode = "host"; -}; - -&usb_1_ss2_dwc3_hs { - remote-endpoint = <&pmic_glink_ss2_hs_in>; }; -&usb_1_ss2_qmpphy_out { - remote-endpoint = <&pmic_glink_ss2_ss_in>; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; }; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -22,6 +22,7 @@ aliases { serial0 = &uart21; + serial1 = &uart14; }; gpio-keys { @@ -288,6 +289,101 @@ regulator-always-on; regulator-boot-on; }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -359,6 +455,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -380,6 +477,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { @@ -770,6 +868,24 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { /delete-property/ #sound-dai-cells; @@ -830,6 +946,23 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -1084,6 +1217,37 @@ drive-strength = <2>; }; }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; }; &uart21 { --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -633,6 +633,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -654,6 +655,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { @@ -1139,6 +1141,7 @@ &mdss_dp0_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp1 { @@ -1147,6 +1150,7 @@ &mdss_dp1_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp3 { @@ -1352,18 +1356,22 @@ status = "okay"; }; +&smb2360_0 { + status = "okay"; +}; + &smb2360_0_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l2b_3p0>; +}; +&smb2360_1 { status = "okay"; }; &smb2360_1_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l14b_3p0>; - - status = "okay"; }; &swr0 { --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -18,6 +18,7 @@ aliases { serial0 = &uart21; + serial1 = &uart14; }; chosen { @@ -290,6 +291,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l14b_3p0: ldo14 { @@ -304,8 +306,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; + regulator-always-on; }; - }; regulators-1 { @@ -562,6 +564,22 @@ }; }; +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + embedded-controller@76 { + compatible = "lenovo,yoga-slim7x-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&ec_int_n_default>; + pinctrl-names = "default"; + }; +}; + &i2c8 { clock-frequency = <400000>; @@ -674,8 +692,6 @@ wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; - - qcom,ath12k-calibration-variant = "LES790"; }; }; @@ -828,6 +844,20 @@ <44 4>, /* SPI (TPM) */ <238 1>; /* UFS Reset */ + bt_en_default: bt-en-sleep { + pins = "gpio116"; + function = "gpio"; + output-low; + bias-disable; + qcom,drive-strength = <16>; + }; + + ec_int_n_default: ec-int-n-state { + pins = "gpio66"; + function = "gpio"; + bias-disable; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio70"; function = "gpio"; @@ -939,6 +969,18 @@ }; +&uart14 { + status = "okay"; + + bluetooth: bt_wcn7850 { + compatible = "qcom,wcn7850-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -944,6 +944,24 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { compatible = "qcom,x1e80100-dp"; /delete-property/ #sound-dai-cells; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi @@ -110,7 +110,7 @@ }; }; - pmc8380-6-thermal { + pmc8380_6_thermal: pmc8380-6-thermal { polling-delay-passive = <100>; thermal-sensors = <&pmc8380_6_temp_alarm>; @@ -223,8 +223,7 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - /* Not yet sure what blocks access */ - status = "reserved"; + qcom,no-alarm; /* alarm owned by ADSP */ }; pmk8550_sdam_2: nvram@7100 { --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -437,6 +437,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -458,6 +459,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { @@ -751,6 +753,7 @@ &mdss_dp0_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp1 { @@ -759,6 +762,7 @@ &mdss_dp1_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp2 { @@ -767,6 +771,7 @@ &mdss_dp2_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp3 { --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -20,6 +20,7 @@ #include #include #include +#include / { interrupt-parent = <&intc>; @@ -71,8 +72,8 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd0>; - power-domain-names = "psci"; + power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; l2_0: l2-cache { @@ -88,8 +89,8 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd1>; - power-domain-names = "psci"; + power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -99,8 +100,8 @@ reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd2>; - power-domain-names = "psci"; + power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -110,8 +111,8 @@ reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd3>; - power-domain-names = "psci"; + power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -121,8 +122,8 @@ reg = <0x0 0x10000>; enable-method = "psci"; next-level-cache = <&l2_1>; - power-domains = <&cpu_pd4>; - power-domain-names = "psci"; + power-domains = <&cpu_pd4>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; l2_1: l2-cache { @@ -138,8 +139,8 @@ reg = <0x0 0x10100>; enable-method = "psci"; next-level-cache = <&l2_1>; - power-domains = <&cpu_pd5>; - power-domain-names = "psci"; + power-domains = <&cpu_pd5>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -149,8 +150,8 @@ reg = <0x0 0x10200>; enable-method = "psci"; next-level-cache = <&l2_1>; - power-domains = <&cpu_pd6>; - power-domain-names = "psci"; + power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -160,8 +161,8 @@ reg = <0x0 0x10300>; enable-method = "psci"; next-level-cache = <&l2_1>; - power-domains = <&cpu_pd7>; - power-domain-names = "psci"; + power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -171,8 +172,8 @@ reg = <0x0 0x20000>; enable-method = "psci"; next-level-cache = <&l2_2>; - power-domains = <&cpu_pd8>; - power-domain-names = "psci"; + power-domains = <&cpu_pd8>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; l2_2: l2-cache { @@ -188,8 +189,8 @@ reg = <0x0 0x20100>; enable-method = "psci"; next-level-cache = <&l2_2>; - power-domains = <&cpu_pd9>; - power-domain-names = "psci"; + power-domains = <&cpu_pd9>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -199,8 +200,8 @@ reg = <0x0 0x20200>; enable-method = "psci"; next-level-cache = <&l2_2>; - power-domains = <&cpu_pd10>; - power-domain-names = "psci"; + power-domains = <&cpu_pd10>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -210,8 +211,8 @@ reg = <0x0 0x20300>; enable-method = "psci"; next-level-cache = <&l2_2>; - power-domains = <&cpu_pd11>; - power-domain-names = "psci"; + power-domains = <&cpu_pd11>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; cpu-idle-states = <&cluster_c4>; }; @@ -252,7 +253,7 @@ }; }; - cluster2 { + cpu_map_cluster2: cluster2 { core0 { cpu = <&cpu8>; }; @@ -322,6 +323,21 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; qcom,dload-mode = <&tcsr 0x19000>; }; + + scmi { + compatible = "arm,scmi"; + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #power-domain-cells = <1>; + }; + }; }; clk_virt: interconnect-0 { @@ -863,8 +879,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -899,8 +915,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -935,8 +951,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -971,8 +987,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1007,8 +1023,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1043,8 +1059,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1079,8 +1095,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1115,8 +1131,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1151,8 +1167,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1187,8 +1203,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1223,8 +1239,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1259,8 +1275,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1295,8 +1311,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "qup-core", "qup-config"; @@ -1320,8 +1336,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1356,8 +1372,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1392,8 +1408,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1428,8 +1444,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1508,8 +1524,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1544,8 +1560,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1580,8 +1596,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1616,8 +1632,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1652,8 +1668,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1688,8 +1704,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1724,8 +1740,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1760,8 +1776,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1796,8 +1812,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1832,8 +1848,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1868,8 +1884,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1904,8 +1920,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1940,8 +1956,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -1976,8 +1992,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2012,8 +2028,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "qup-core", "qup-config"; @@ -2037,8 +2053,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2073,8 +2089,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2152,8 +2168,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2188,8 +2204,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2224,8 +2240,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2260,8 +2276,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2296,8 +2312,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2332,8 +2348,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "qup-core", "qup-config"; @@ -2357,8 +2373,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2393,8 +2409,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2429,8 +2445,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2465,8 +2481,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2501,8 +2517,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2537,8 +2553,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2573,8 +2589,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2609,8 +2625,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2645,8 +2661,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2681,8 +2697,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -2717,8 +2733,8 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; interconnect-names = "qup-core", @@ -3194,8 +3210,8 @@ interconnects = <&pcie_north_anoc MASTER_PCIE_3 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "pcie-mem", "cpu-pcie"; @@ -3395,8 +3411,8 @@ interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "pcie-mem", "cpu-pcie"; @@ -3522,8 +3538,8 @@ interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "pcie-mem", "cpu-pcie"; @@ -3558,8 +3574,10 @@ "pipe", "pipediv2"; - resets = <&gcc GCC_PCIE_5_PHY_BCR>; - reset-names = "phy"; + resets = <&gcc GCC_PCIE_5_PHY_BCR>, + <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>; assigned-clock-rates = <100000000>; @@ -3646,8 +3664,8 @@ interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "pcie-mem", "cpu-pcie"; @@ -3692,8 +3710,10 @@ "pipe", "pipediv2"; - resets = <&gcc GCC_PCIE_4_PHY_BCR>; - reset-names = "phy"; + resets = <&gcc GCC_PCIE_4_PHY_BCR>, + <&gcc GCC_PCIE_4_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; assigned-clock-rates = <100000000>; @@ -3747,7 +3767,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_microcode_mem>; }; @@ -4694,8 +4714,8 @@ interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "usb-ddr", "apps-usb"; @@ -4794,8 +4814,8 @@ interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB2 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "usb-ddr", "apps-usb"; @@ -4814,6 +4834,8 @@ snps,dis-u1-entry-quirk; snps,dis-u2-entry-quirk; + dma-coherent; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4879,8 +4901,8 @@ interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "usb-ddr", "apps-usb"; @@ -5053,8 +5075,8 @@ interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>; + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "usb-ddr", "apps-usb"; @@ -7959,6 +7981,13 @@ }; }; + cpucp_mbox: mailbox@17430000 { + compatible = "qcom,x1e80100-cpucp-mbox"; + reg = <0 0x17430000 0 0x10000>, <0 0x18830000 0 0x10000>; + interrupts = ; + #mbox-cells = <1>; + }; + apps_rsc: rsc@17500000 { compatible = "qcom,rpmh-rsc"; reg = <0 0x17500000 0 0x10000>, @@ -8142,6 +8171,32 @@ }; }; + sram: sram@18b4e000 { + compatible = "mmio-sram"; + reg = <0x0 0x18b4e000 0x0 0x400>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x18b4e000 0x400>; + + cpu_scp_lpri0: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_lpri1: scp-sram-section@200 { + compatible = "arm,scmi-shmem"; + reg = <0x200 0x200>; + }; + }; + + watchdog@1c840000 { + compatible = "arm,sbsa-gwdt"; + reg = <0 0x1c840000 0 0x1000>, + <0 0x1c850000 0 0x1000>; + interrupts = ; + }; + pmu@24091000 { compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; reg = <0 0x24091000 0 0x1000>; @@ -8199,7 +8254,7 @@ }; /* cluster0 */ - pmu@240b3400 { + bwmon_cluster0: pmu@240b3400 { compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x240b3400 0 0x600>; @@ -8209,6 +8264,19 @@ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + /* cluster2 */ + bwmon_cluster2: pmu@240b5400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b5400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; cpu_bwmon_opp_table: opp-table { compatible = "operating-points-v2"; @@ -8239,19 +8307,6 @@ }; }; - /* cluster2 */ - pmu@240b5400 { - compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0 0x240b5400 0 0x600>; - - interrupts = ; - - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; - - operating-points-v2 = <&cpu_bwmon_opp_table>; - }; - /* cluster1 */ pmu@240b6400 { compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; @@ -8457,33 +8512,19 @@ }; aoss0-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; }; cpu0-0-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 1>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8491,25 +8532,11 @@ }; cpu0-0-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 2>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8517,25 +8544,11 @@ }; cpu0-1-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 3>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8543,25 +8556,11 @@ }; cpu0-1-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 4>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8569,25 +8568,11 @@ }; cpu0-2-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 5>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8595,25 +8580,11 @@ }; cpu0-2-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 6>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8621,25 +8592,11 @@ }; cpu0-3-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 7>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8647,25 +8604,11 @@ }; cpu0-3-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 8>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8676,15 +8619,9 @@ thermal-sensors = <&tsens0 9>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -8694,15 +8631,9 @@ thermal-sensors = <&tsens0 10>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -8719,7 +8650,7 @@ }; mem-critical { - temperature = <125000>; + temperature = <115000>; hysteresis = <0>; type = "critical"; }; @@ -8727,15 +8658,19 @@ }; video-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens0 12>; trips { trip-point0 { - temperature = <125000>; + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video-critical { + temperature = <115000>; hysteresis = <1000>; - type = "passive"; + type = "critical"; }; }; }; @@ -8751,33 +8686,19 @@ }; aoss0-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; }; cpu1-0-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 1>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8785,25 +8706,11 @@ }; cpu1-0-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 2>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8811,25 +8718,11 @@ }; cpu1-1-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 3>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8837,25 +8730,11 @@ }; cpu1-1-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 4>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8863,25 +8742,11 @@ }; cpu1-2-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 5>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8889,25 +8754,11 @@ }; cpu1-2-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 6>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8915,25 +8766,11 @@ }; cpu1-3-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 7>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8941,25 +8778,11 @@ }; cpu1-3-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens1 8>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -8970,15 +8793,9 @@ thermal-sensors = <&tsens1 9>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -8988,15 +8805,9 @@ thermal-sensors = <&tsens1 10>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9013,33 +8824,19 @@ }; aoss0-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; }; cpu2-0-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 1>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9047,25 +8844,11 @@ }; cpu2-0-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 2>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9073,25 +8856,11 @@ }; cpu2-1-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 3>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9099,25 +8868,11 @@ }; cpu2-1-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 4>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9125,25 +8880,11 @@ }; cpu2-2-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 5>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9151,25 +8892,11 @@ }; cpu2-2-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 6>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9177,25 +8904,11 @@ }; cpu2-3-top-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 7>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9203,25 +8916,11 @@ }; cpu2-3-btm-thermal { - polling-delay-passive = <250>; - thermal-sensors = <&tsens2 8>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu-critical { - temperature = <110000>; + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9232,15 +8931,9 @@ thermal-sensors = <&tsens2 9>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9250,15 +8943,9 @@ thermal-sensors = <&tsens2 10>; trips { - trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9275,8 +8962,8 @@ }; aoss0-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9293,8 +8980,8 @@ }; nsp0-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9311,8 +8998,8 @@ }; nsp1-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9329,8 +9016,8 @@ }; nsp2-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9347,33 +9034,34 @@ }; nsp3-critical { - temperature = <125000>; - hysteresis = <0>; + temperature = <115000>; + hysteresis = <1000>; type = "critical"; }; }; }; gpuss-0-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 5>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9381,25 +9069,26 @@ }; gpuss-1-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 6>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9407,25 +9096,26 @@ }; gpuss-2-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 7>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss2_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9433,25 +9123,26 @@ }; gpuss-3-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 8>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss3_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9459,25 +9150,26 @@ }; gpuss-4-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 9>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss4_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss4_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9485,25 +9177,26 @@ }; gpuss-5-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 10>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss5_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss5_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9511,25 +9204,26 @@ }; gpuss-6-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 11>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss6_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss6_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9537,25 +9231,26 @@ }; gpuss-7-thermal { - polling-delay-passive = <10>; + polling-delay-passive = <200>; thermal-sensors = <&tsens3 12>; - trips { - trip-point0 { - temperature = <85000>; - hysteresis = <1000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&gpuss7_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; + }; - trip-point1 { - temperature = <90000>; + trips { + gpuss7_alert0: trip-point0 { + temperature = <95000>; hysteresis = <1000>; - type = "hot"; + type = "passive"; }; - trip-point2 { - temperature = <125000>; + gpu-critical { + temperature = <115000>; hysteresis = <1000>; type = "critical"; }; @@ -9574,7 +9269,7 @@ camera0-critical { temperature = <115000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; @@ -9592,7 +9287,7 @@ camera0-critical { temperature = <115000>; - hysteresis = <0>; + hysteresis = <1000>; type = "critical"; }; }; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1p42100-crd.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1p42100-crd.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "x1p42100.dtsi" +#include "x1-crd.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model = "Qualcomm Technologies, Inc. X1P42100 CRD"; + compatible = "qcom,x1p42100-crd", "qcom,x1p42100"; +}; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1p42100.dtsi +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1p42100.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* X1P42100 is heavily based on X1E80100, with some meaningful differences */ +#include "x1e80100.dtsi" + +/delete-node/ &bwmon_cluster0; +/delete-node/ &cluster_pd2; +/delete-node/ &cpu_map_cluster2; +/delete-node/ &cpu8; +/delete-node/ &cpu9; +/delete-node/ &cpu10; +/delete-node/ &cpu11; +/delete-node/ &cpu_pd8; +/delete-node/ &cpu_pd9; +/delete-node/ &cpu_pd10; +/delete-node/ &cpu_pd11; +/delete-node/ &pcie3_phy; + +&gcc { + compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc"; +}; + +/* The GPU is physically different and will be brought up later */ +&gpu { + /delete-property/ compatible; +}; + +&gpucc { + compatible = "qcom,x1p42100-gpucc"; +}; + +/* PCIe3 has half the lanes compared to X1E80100 */ +&pcie3 { + num-lanes = <4>; +}; + +&pcie6a_phy { + compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy"; +}; + +&soc { + /* The PCIe3 PHY on X1P42100 uses a different IP block */ + pcie3_phy: phy@1bd4000 { + compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy"; + reg = <0x0 0x01bd4000 0x0 0x2000>, + <0x0 0x01bd6000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_8L_CLKREF_EN>, + <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3_PIPE_CLK>, + <&gcc GCC_PCIE_3_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_3_PHY_BCR>, + <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie3_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; +}; --- linux-6.14.0.orig/arch/arm64/boot/dts/qcom/x1p64100-acer-swift-sf14-11.dts +++ linux-6.14.0/arch/arm64/boot/dts/qcom/x1p64100-acer-swift-sf14-11.dts @@ -0,0 +1,1280 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Linaro Limited + * Copyright (c) 2024, Victorien Alric - vickdu31 + */ + +/dts-v1/; + +#include +#include +#include +#include + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "Acer Swift 14 AI (SF14-11)"; + compatible = "acer,swift-sf14-11","qcom,x1p64100", "qcom,x1e80100"; + chassis-type = "laptop"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Display-adjacent port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* User-adjacent port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rtmr1_1p15_reg_en>; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rtmr1_1p8_reg_en>; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&rtmr1_3p3_reg_en>; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/ACER/SF14-11/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; + + + /* ELAN06F1 or SYNA06F2 */ + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + clock-names = "xo"; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + clock-names = "xo"; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + /* ILIT2911 or GTCH1563 */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; +}; + +&i2c20 { + clock-frequency = <400000>; + + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + backlight = <&backlight>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + bias-disable; + }; +}; + +&pm8550ve_9_gpios { + rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; + +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + +&pmc8380_5_gpios { + rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + bias-disable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ACER/SF14-11/qcadsp8380.mbn", + "qcom/x1e80100/ACER/SF14-11/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ACER/SF14-11/qccdsp8380.mbn", + "qcom/x1e80100/ACER/SF14-11/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <72 2>, /* Secure EC I2C connection (?) */ + <238 1>; /* UFS Reset */ + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts0_default: ts0-default-state { + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + bt_en_default: bt-en-sleep { + pins = "gpio116"; + function = "gpio"; + output-low; + bias-disable; + qcom,drive-strength = <16>; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart14 { + status = "okay"; + bluetooth: bt_wcn7850 { + compatible = "qcom,wcn7850-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_default>; + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb5_repeater>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; --- linux-6.14.0.orig/arch/m68k/mvme147/config.c +++ linux-6.14.0/arch/m68k/mvme147/config.c @@ -208,3 +208,32 @@ } local_irq_restore(flags); } + +static void scc_delay(void) +{ + __asm__ __volatile__ ("nop; nop;"); +} + +static void scc_write(char ch) +{ + do { + scc_delay(); + } while (!(in_8(M147_SCC_A_ADDR) & BIT(2))); + scc_delay(); + out_8(M147_SCC_A_ADDR, 8); + scc_delay(); + out_8(M147_SCC_A_ADDR, ch); +} + +void mvme147_scc_write(struct console *co, const char *str, unsigned int count) +{ + unsigned long flags; + + local_irq_save(flags); + while (count--) { + if (*str == '\n') + scc_write('\r'); + scc_write(*str++); + } + local_irq_restore(flags); +} --- linux-6.14.0.orig/arch/powerpc/Makefile +++ linux-6.14.0/arch/powerpc/Makefile @@ -225,7 +225,7 @@ all: zImage # With make 3.82 we cannot mix normal and wildcard targets -BOOT_TARGETS1 := zImage zImage.initrd uImage +BOOT_TARGETS1 := zImage zImage.initrd uImage vmlinux.strip BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.% PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2) --- linux-6.14.0.orig/arch/powerpc/include/asm/cputhreads.h +++ linux-6.14.0/arch/powerpc/include/asm/cputhreads.h @@ -3,6 +3,7 @@ #define _ASM_POWERPC_CPUTHREADS_H #ifndef __ASSEMBLY__ +#include #include #include --- linux-6.14.0.orig/arch/powerpc/kernel/pci-common.c +++ linux-6.14.0/arch/powerpc/kernel/pci-common.c @@ -360,6 +360,7 @@ } return NULL; } +EXPORT_SYMBOL(pci_find_hose_for_OF_device); struct pci_controller *pci_find_controller_for_domain(int domain_nr) { @@ -1630,6 +1631,7 @@ { return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); } +EXPORT_SYMBOL_GPL(early_find_capability); struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) { --- linux-6.14.0.orig/arch/powerpc/kernel/setup-common.c +++ linux-6.14.0/arch/powerpc/kernel/setup-common.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -68,6 +69,7 @@ #include #include #include +#include #include "setup.h" @@ -922,6 +924,16 @@ */ initialize_cache_info(); + /* + * Lock down the kernel if booted in secure mode. This is required to + * maintain kernel integrity. + */ + if (IS_ENABLED(CONFIG_LOCK_DOWN_IN_SECURE_BOOT)) { + if (is_ppc_secureboot_enabled()) + security_lock_kernel_down("PowerNV Secure Boot mode", + LOCKDOWN_INTEGRITY_MAX); + } + /* Initialize RTAS if available. */ rtas_initialize(); --- linux-6.14.0.orig/arch/powerpc/lib/sstep.c +++ linux-6.14.0/arch/powerpc/lib/sstep.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include --- linux-6.14.0.orig/arch/powerpc/platforms/pseries/vio.c +++ linux-6.14.0/arch/powerpc/platforms/pseries/vio.c @@ -39,7 +39,6 @@ .name = "vio", .type = "", .dev.init_name = "vio", - .dev.bus = &vio_bus_type, }; #ifdef CONFIG_PPC_SMLPAR --- linux-6.14.0.orig/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ linux-6.14.0/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -192,9 +192,11 @@ status = "okay"; }; +/* UBUNTU: PCIe support is not yet ready, so disable it for now &pcie { status = "okay"; }; +*/ &qspi { status = "okay"; --- linux-6.14.0.orig/arch/riscv/boot/dts/sifive/fu740-c000.dtsi +++ linux-6.14.0/arch/riscv/boot/dts/sifive/fu740-c000.dtsi @@ -42,7 +42,7 @@ }; }; cpu1: cpu@1 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; @@ -69,7 +69,7 @@ }; }; cpu2: cpu@2 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; @@ -96,7 +96,7 @@ }; }; cpu3: cpu@3 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; @@ -123,7 +123,7 @@ }; }; cpu4: cpu@4 { - compatible = "sifive,bullet0", "riscv"; + compatible = "sifive,u74-mc", "sifive,bullet0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; d-cache-size = <32768>; --- linux-6.14.0.orig/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-microsemi.dts +++ linux-6.14.0/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-microsemi.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "hifive-unleashed-a00.dts" + +/ { + soc { + pcie: pcie@2030000000 { + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + compatible = "microsemi,ms-pf-axi-pcie-host"; + device_type = "pci"; + bus-range = <0x01 0x7f>; + interrupt-map = <0 0 0 1 &ms_pcie_intc 0 0 0 0 2 &ms_pcie_intc 1 0 0 0 3 &ms_pcie_intc 2 0 0 0 4 &ms_pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + interrupt-parent = <&plic0>; + interrupts = <32>; + ranges = <0x3000000 0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>; + reg = <0x20 0x30000000 0x0 0x4000000 0x20 0x0 0x0 0x100000>; + reg-names = "control", "apb"; + ms_pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; +}; --- linux-6.14.0.orig/arch/riscv/mm/init.c +++ linux-6.14.0/arch/riscv/mm/init.c @@ -868,6 +868,10 @@ disable_pgtable_l4(); } + /* UBUNTU: Force disable sv57 and fallback to sv48 */ + if (pgtable_l5_enabled) + disable_pgtable_l5(); + memset(early_pg_dir, 0, PAGE_SIZE); memset(early_p4d, 0, PAGE_SIZE); memset(early_pud, 0, PAGE_SIZE); --- linux-6.14.0.orig/arch/s390/include/asm/ipl.h +++ linux-6.14.0/arch/s390/include/asm/ipl.h @@ -139,6 +139,7 @@ unsigned char flags, unsigned short cert); int ipl_report_add_certificate(struct ipl_report *report, void *key, unsigned long addr, unsigned long len); +bool ipl_get_secureboot(void); /* * DIAG 308 support --- linux-6.14.0.orig/arch/s390/kernel/ipl.c +++ linux-6.14.0/arch/s390/kernel/ipl.c @@ -2497,3 +2497,8 @@ } #endif + +bool ipl_get_secureboot(void) +{ + return !!ipl_secure_flag; +} --- linux-6.14.0.orig/arch/s390/kernel/setup.c +++ linux-6.14.0/arch/s390/kernel/setup.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -916,6 +917,9 @@ log_component_list(); + if (ipl_get_secureboot()) + security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX); + /* Have one command line that is parsed and saved in /proc/cmdline */ /* boot_command_line has been already set up in early.c */ *cmdline_p = boot_command_line; --- linux-6.14.0.orig/arch/x86/include/asm/pci-direct.h +++ linux-6.14.0/arch/x86/include/asm/pci-direct.h @@ -10,9 +10,11 @@ extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset); extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset); extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset); +extern u32 pci_early_find_cap(int bus, int slot, int func, int cap); extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val); extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val); extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val); +extern unsigned int pci_early_clear_msi; extern int early_pci_allowed(void); #endif /* _ASM_X86_PCI_DIRECT_H */ --- linux-6.14.0.orig/arch/x86/kernel/aperture_64.c +++ linux-6.14.0/arch/x86/kernel/aperture_64.c @@ -136,32 +136,6 @@ } -/* Find a PCI capability */ -static u32 __init find_cap(int bus, int slot, int func, int cap) -{ - int bytes; - u8 pos; - - if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & - PCI_STATUS_CAP_LIST)) - return 0; - - pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); - for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { - u8 id; - - pos &= ~3; - id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); - if (id == 0xff) - break; - if (id == cap) - return pos; - pos = read_pci_config_byte(bus, slot, func, - pos+PCI_CAP_LIST_NEXT); - } - return 0; -} - /* Read a standard AGPv3 bridge header */ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { @@ -250,8 +224,8 @@ case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(bus, slot, func, - PCI_CAP_ID_AGP); + cap = pci_early_find_cap(bus, slot, + func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; --- linux-6.14.0.orig/arch/x86/kernel/early-quirks.c +++ linux-6.14.0/arch/x86/kernel/early-quirks.c @@ -29,6 +29,37 @@ #include #include +static void __init early_pci_clear_msi(int bus, int slot, int func) +{ + int pos; + u16 ctrl; + + if (likely(!pci_early_clear_msi)) + return; + + pr_info_once("Clearing MSI/MSI-X enable bits early in boot (quirk)\n"); + + pos = pci_early_find_cap(bus, slot, func, PCI_CAP_ID_MSI); + if (pos) { + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSI_FLAGS); + ctrl &= ~PCI_MSI_FLAGS_ENABLE; + write_pci_config_16(bus, slot, func, pos + PCI_MSI_FLAGS, ctrl); + + /* Read again to flush previous write */ + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSI_FLAGS); + } + + pos = pci_early_find_cap(bus, slot, func, PCI_CAP_ID_MSIX); + if (pos) { + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSIX_FLAGS); + ctrl &= ~PCI_MSIX_FLAGS_ENABLE; + write_pci_config_16(bus, slot, func, pos + PCI_MSIX_FLAGS, ctrl); + + /* Read again to flush previous write */ + ctrl = read_pci_config_16(bus, slot, func, pos + PCI_MSIX_FLAGS); + } +} + static void __init fix_hypertransport_config(int num, int slot, int func) { u32 htcfg; @@ -727,6 +758,7 @@ PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, { PCI_VENDOR_ID_BROADCOM, 0x4331, PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset}, + { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, early_pci_clear_msi}, {} }; @@ -779,6 +811,10 @@ PCI_HEADER_TYPE); if ((type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) { + /* pci_early_clear_msi scans the buses differently. */ + if (pci_early_clear_msi) + return -1; + sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS); if (sec > num) early_pci_scan_bus(sec); @@ -805,8 +841,13 @@ void __init early_quirks(void) { + int bus; + if (!early_pci_allowed()) return; early_pci_scan_bus(0); + /* pci_early_clear_msi scans more buses. */ + for (bus = 1; pci_early_clear_msi && bus < 256; bus++) + early_pci_scan_bus(bus); } --- linux-6.14.0.orig/arch/x86/kernel/reboot.c +++ linux-6.14.0/arch/x86/kernel/reboot.c @@ -488,7 +488,46 @@ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, - + { /* Handle problems with rebooting on the Latitude E6520. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6520"), + }, + }, + { /* Handle problems with rebooting on the OptiPlex 790. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 790", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 790"), + }, + }, + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + }, + }, + { /* Handle problems with rebooting on the Latitude E6220. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6220", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6220"), + }, + }, + { /* Handle problems with rebooting on the OptiPlex 390. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 390", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 390"), + }, + }, { } }; --- linux-6.14.0.orig/arch/x86/kernel/setup.c +++ linux-6.14.0/arch/x86/kernel/setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -910,6 +911,13 @@ reserve_ibft_region(); x86_init.resources.dmi_setup(); + efi_set_secure_boot(boot_params.secure_boot); + +#ifdef CONFIG_LOCK_DOWN_IN_SECURE_BOOT + if (efi_enabled(EFI_SECURE_BOOT)) + security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX); +#endif + /* * VMware detection requires dmi to be available, so this * needs to be done after dmi_setup(), for the boot CPU. @@ -1073,19 +1081,7 @@ /* Allocate bigger log buffer */ setup_log_buf(1); - if (efi_enabled(EFI_BOOT)) { - switch (boot_params.secure_boot) { - case efi_secureboot_mode_disabled: - pr_info("Secure boot disabled\n"); - break; - case efi_secureboot_mode_enabled: - pr_info("Secure boot enabled\n"); - break; - default: - pr_info("Secure boot could not be determined\n"); - break; - } - } + efi_set_secure_boot(boot_params.secure_boot); reserve_initrd(); --- linux-6.14.0.orig/arch/x86/pci/common.c +++ linux-6.14.0/arch/x86/pci/common.c @@ -34,6 +34,7 @@ #endif int pcibios_last_bus = -1; unsigned long pirq_table_addr; +unsigned int pci_early_clear_msi; const struct pci_raw_ops *__read_mostly raw_pci_ops; const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; @@ -614,6 +615,9 @@ } else if (!strcmp(str, "skip_isa_align")) { pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; return NULL; + } else if (!strcmp(str, "clearmsi")) { + pci_early_clear_msi = 1; + return NULL; } else if (!strcmp(str, "noioapicquirk")) { noioapicquirk = 1; return NULL; --- linux-6.14.0.orig/arch/x86/pci/early.c +++ linux-6.14.0/arch/x86/pci/early.c @@ -51,6 +51,31 @@ outw(val, 0xcfc + (offset&2)); } +u32 pci_early_find_cap(int bus, int slot, int func, int cap) +{ + int bytes; + u8 pos; + + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos = read_pci_config_byte(bus, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + int early_pci_allowed(void) { return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == --- linux-6.14.0.orig/certs/blacklist.c +++ linux-6.14.0/certs/blacklist.c @@ -276,6 +276,9 @@ if (IS_ERR(key)) { pr_err("Problem with revocation key (%ld)\n", PTR_ERR(key)); return PTR_ERR(key); + } else { + pr_notice("Revoked X.509 cert '%s'\n", + key_ref_to_ptr(key)->description); } return 0; --- linux-6.14.0.orig/crypto/aegis128-neon-inner.c +++ linux-6.14.0/crypto/aegis128-neon-inner.c @@ -148,8 +148,8 @@ kiv, vld1q_u8(const1), vld1q_u8(const0), - k ^ vld1q_u8(const0), - k ^ vld1q_u8(const1), + (uint8x16_t) (k ^ vld1q_u8(const0)), + (uint8x16_t) (k ^ vld1q_u8(const1)), }}; int i; --- linux-6.14.0.orig/crypto/asymmetric_keys/x509_loader.c +++ linux-6.14.0/crypto/asymmetric_keys/x509_loader.c @@ -41,6 +41,7 @@ if (IS_ERR(key)) { pr_err("Problem loading in-kernel X.509 certificate (%ld)\n", PTR_ERR(key)); + WARN_ON_ONCE(1); } else { pr_notice("Loaded X.509 cert '%s'\n", key_ref_to_ptr(key)->description); --- linux-6.14.0.orig/crypto/fips.c +++ linux-6.14.0/crypto/fips.c @@ -15,7 +15,8 @@ #include #include -int fips_enabled; +/* LP: #2049082 UBUNTU: SAUCE: FIPS kernels default to FIPS mode */ +int fips_enabled = 1; EXPORT_SYMBOL_GPL(fips_enabled); ATOMIC_NOTIFIER_HEAD(fips_fail_notif_chain); --- linux-6.14.0.orig/debian.master/changelog +++ linux-6.14.0/debian.master/changelog @@ -0,0 +1,25680 @@ +linux (6.14.0-13.13) plucky; urgency=medium + + * plucky/linux: 6.14.0-13.13 -proposed tracker (LP: #2104293) + + * Miscellaneous Ubuntu changes + - [Packaging] Fix invoking of control-create + + -- Paolo Pisati Wed, 26 Mar 2025 20:26:51 +0100 + +linux (6.14.0-12.12) plucky; urgency=medium + + * plucky/linux: 6.14.0-12.12 -proposed tracker (LP: #2104021) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.03.24) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.03.24) + + * Disconnected paths for mqueues show a TODO in the kernel logs (LP: #2102237) + - SAUCE: apparmor4.0.0 [58/53]: apparmor: add mediation of disconnected paths + in mqueues + + * Installation of AppArmor on a 6.14 kernel produces error message "Illegal + number: yes" (LP: #2102680) + - SAUCE: apparmor4.0.0 [56/53]: apparmor: create an + AA_SFS_TYPE_BOOLEAN_INTPRINT sysctl variant + - SAUCE: apparmor4.0.0 [57/53]: apparmor: Use AA_SFS_FILE_BOOLEAN_INTPRINT for + userns and io_uring sysctls + + * QRT AppArmorUnixDomainConnect test failures on Plucky 6.14 kernel + (LP: #2103460) + - SAUCE: apparmor4.0.0 [54/53]: AppArmor: Fix af_unix backwards compat + - SAUCE: apparmor4.0.0 [55/53]: apparmor: Fix inet mediation + + * Mouse cursor flashes using the 'xe' DRM driver (LP: #2103981) + - drm/xe/display: Re-use display vmas when possible + + * Snapdragon X Elite: Sync concept kernel changes (LP: #2100858) + - SAUCE: drm/msm/dp: Fix support of LTTPR handling + - SAUCE: drm/msm/dp: Introduce link training per-segment for LTTPRs + - SAUCE: wifi: ath12k: fix ring-buffer corruption + - SAUCE: wifi: ath11k: fix ring-buffer corruption + - SAUCE: arm64: dts: qcom: x1e80100-hp-omnibook-x14: Enable SMB2360 0 and 1 + - SAUCE: Revert "usb: typec: ps883x: fix missing accessibility check" + + * drm/xe: improve behavior under memory pressure (LP: #2102659) + - drm/xe: Reject BO eviction if BO is bound to current VM + + * Introduce configfs-based interface for gpio-aggregator (LP: #2103496) + - gpio: introduce utilities for synchronous fake device creation + - gpio: sim: convert to use dev-sync-probe utilities + - gpio: virtuser: convert to use dev-sync-probe utilities + - [Config] updateconfigs for DEV_SYNC_PROBE + - SAUCE: gpio: aggregator: reorder functions to prepare for configfs + introduction + - SAUCE: gpio: aggregator: add aggr_alloc()/aggr_free() + - SAUCE: gpio: aggregator: introduce basic configfs interface + - SAUCE: gpio: aggregator: rename 'name' to 'key' in aggr_parse() + - SAUCE: gpio: aggregator: expose aggregator created via legacy sysfs to + configfs + - SAUCE: gpio: aggregator: cancel deferred probe for devices created via + configfs + - SAUCE: Documentation: gpio: document configfs interface for gpio-aggregator + - SAUCE: selftests: gpio: add test cases for gpio-aggregator + + * python perf module missing in plucky's kernel (LP: #2103653) + - [Packaging] linux-perf: Fix python perf library location + + * Miscellaneous Ubuntu changes + - [packaging] mv debian.master/copyright debian + - [Config] Disable CONFIG_MODULE_COMPRESS_ALL + - Revert "SAUCE: Support but do not require compressed modules" + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Config] Revert back to GENKSYMS on amd64/arm64 too, drop + rust support" + + -- Paolo Pisati Wed, 26 Mar 2025 10:50:08 +0100 + +linux (6.14.0-11.11) plucky; urgency=medium + + * plucky/linux: 6.14.0-11.11 -proposed tracker (LP: #2103404) + + * Snapdragon X Elite: Sync concept kernel changes (LP: #2100858) + - firmware: qcom: uefisecapp: fix efivars registration race + - soc: qcom: pdr: Fix the potential deadlock + - clk: qcom: gcc-x1e80100: Unregister GCC_GPU_CFG_AHB_CLK/GCC_DISP_XO_CLK + - arm64: dts: qcom: x1e80100: Set CPU interconnect paths as ACTIVE_ONLY + - dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings + - usb: typec: Add support for Parade PS8830 Type-C Retimer + - usb: typec: ps883x: fix probe error handling + - usb: typec: ps883x: fix registration race + - usb: typec: ps883x: fix missing accessibility check + - usb: typec: ps883x: fix configuration error handling + - drm/dp: Add helper to set LTTPRs in transparent mode + - drm/msm/dp: Add support for LTTPR handling + - arm64: dts: qcom: x1e80100: Add the watchdog device + - arm64: dts: qcom: x1e80100: Mark usb_2 as dma-coherent + - arm64: dts: qcom: x1e80100: Wire up PCIe PHY NOCSR resets + - arm64: dts: qcom: Commonize X1 CRD DTSI + - arm64: dts: qcom: Add X1P42100 SoC and CRD + - arm64: dts: qcom: x1e80100: Fix video thermal zone + - arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown + - arm64: dts: qcom: x1e80100: Add GPU cooling + - arm64: dts: qcom: x1e80100: Drop unused passive thermal trip points for CPU + - arm64: dts: qcom: x1e80100-dell-xps13-9345: Enable external DP support + - arm64: dts: qcom: x1e001de-devkit: Enable HBR3 on external DPs + - arm64: dts: qcom: x1e80100-hp-x14: Enable HBR3 on external DPs + - arm64: dts: qcom: x1e80100-qcp: Enable HBR3 on external DPs + - drm/edp-panel: Add panel used by T14s Gen6 Snapdragon + - arm64: dts: qcom: x1e80100-slim7x: Drop incorrect qcom,ath12k-calibration- + variant + - SAUCE: arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps13-9345: mark l12b and l15b + always-on + - SAUCE: arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e80100-qcp: mark l12b and l15b always-on + - SAUCE: arm64: dts: qcom: x1e78100-t14s: fix missing HID supplies + - SAUCE: arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes + - SAUCE: arm64: dts: qcom: x1e80100: Enable cpufreq + - SAUCE: arm64: dts: qcom: x1e80100-t14s: Describe the Parade PS8830 retimers + - SAUCE: arm64: dts: qcom: x1e80100-t14s: Enable external DisplayPort support + - SAUCE: arm64: dts: qcom: x1e80100-t14s: Enable HBR3 on external DPs + - SAUCE: arm64: dts: qcom: x1e78100-t14s: enable bluetooth + - SAUCE: Add Bluetooth support for the Lenovo Yoga Slim 7x + - SAUCE: dt-bindings: platform: Add bindings for Lenovo Yoga Slim 7x EC + - SAUCE: platform: arm64: Add driver for Lenovo Yoga Slim 7x's EC + - SAUCE: arm64: dts: qcom: Add EC to Lenovo Yoga Slim 7x + - SAUCE: arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth + - SAUCE: arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports + - SAUCE: arm64: dts: qcom: x1e80100-vivobook-s15: Enable micro-sd card reader + - SAUCE: arm64: dts: qcom: x1p64100-acer-swift-sf14-11 dt for Acer Swift 14 + SF14-11 (touchpad fix) + - SAUCE: dt-bindings: arm: qcom: Add Acer Swift 14 AI + - SAUCE: arm64: dts: qcom: x1e80100-acer-swift-sf14-11: Enable HBR3 on + external DPs + - SAUCE: firmware: qcom: scm: Allow QSEECOM on Acer Swift 14 models + - SAUCE: arm64: dts: qcom: x1e001de-devkit: Set ps8830 reset-gpios active low + - SAUCE: Change: cracking sound fix + - SAUCE: rtc: pm8xxx: add support for uefi offset + - SAUCE: rtc: pm8xxx: mitigate flash wear + - SAUCE: arm64: dts: qcom: sc8280xp-x13s: switch to uefi rtc offset + - SAUCE: dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag + - SAUCE: rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm + - SAUCE: arm64: dts: qcom: x1e80100: enable rtc + - SAUCE: arm64: dts: qcom: x1e80100-microsoft-romulus: Enable external DP + support + - SAUCE: arm64: dts: qcom: x1e80100-asus-vivobook: Introduce retimers, + external DP + - SAUCE: arm64: dts: qcom: x1e80100-dell-xps-9345: Add WiFi/BT pwrseq + - SAUCE: arm64: dts: qcom: x1e78100-t14s: Add display brightness control + support + - SAUCE: hack: efi/libstub: mitigate t14s exit_boot_services() failure + - [Config] Enable X Elite modules on arm64 + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.14-rc7 rebase + + -- Paolo Pisati Mon, 17 Mar 2025 11:29:48 +0100 + +linux (6.14.0-10.10) plucky; urgency=medium + + * plucky/linux: 6.14.0-10.10 -proposed tracker (LP: #2102106) + + * Miscellaneous Ubuntu changes + - [Config] Revert back to GENKSYMS on amd64/arm64 too, drop rust support + + -- Paolo Pisati Wed, 12 Mar 2025 15:20:52 +0100 + +linux (6.14.0-9.9) plucky; urgency=medium + + * plucky/linux: 6.14.0-9.9 -proposed tracker (LP: #2101943) + + * Miscellaneous Ubuntu changes + - [Config] Revert back to GENKSYMS on non-rust-enabled archs + + -- Paolo Pisati Tue, 11 Mar 2025 12:38:22 +0100 + +linux (6.14.0-8.8) plucky; urgency=medium + + * plucky/linux: 6.14.0-8.8 -proposed tracker (LP: #2101833) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.02.26) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.03.10) + + * wdat_wdt.ko should be pulled in by linux-image-virtual (LP: #2098554) + - [Packaging]: wdat_wdt.ko is moved from "linux-modules-extra-*-generic" to + "linux-modules-*-generic" + + * Add additional PCI ids for BMG support (LP: #2098969) + - drm/xe/bmg: Add new PCI IDs + + * Provide linux-perf package (LP: #1613393) + - [Packaging] Split linux-perf from linux-tools-common + + * linux-tools-common: bpftool wrapper causes build failure for xdp-tools + (LP: #2007308) + - [Packaging] bpftool: move to separate unversioned and unflavored binary + package + + * Miscellaneous Ubuntu changes + - [Packaging] templates/image.postrm.in: Add modules.weakdep to the remove- + list + - [Config] Re-enable rust support, switch from genksyms to gendwarfksyms + - [packaging] check-in copyright directly in debian/ + - [Packaging] remove intermediate $(DEBIAN)/control.stub + - [Config] updateconfigs following v6.14-rc6 rebase + + -- Paolo Pisati Mon, 10 Mar 2025 16:46:27 +0100 + +linux (6.14.0-7.7) plucky; urgency=medium + + * plucky/linux: 6.14.0-7.7 -proposed tracker (LP: #2100581) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Sync riscv64.mk with linux-riscv tree" + + -- Paolo Pisati Fri, 28 Feb 2025 10:46:05 +0100 + +linux (6.14.0-6.6) plucky; urgency=medium + + * plucky/linux: 6.14.0-6.6 -proposed tracker (LP: #2100481) + + * Miscellaneous Ubuntu changes + - [Packaging] riscv64.mk: fix a typo + - [Packaging] enable signing for s390x + - [Packaging] riscv64.mk: disable building as part of linux-generic + + -- Paolo Pisati Fri, 28 Feb 2025 09:44:27 +0100 + +linux (6.14.0-5.5) plucky; urgency=medium + + * plucky/linux: 6.14.0-5.5 -proposed tracker (LP: #2100254) + + * Miscellaneous Ubuntu changes + - [Packaging] Sync riscv64.mk with linux-riscv tree + - [Packaging] clean up the distclean rule + - [Config] updateconfigs following v6.14-rc4 rebase + + -- Paolo Pisati Wed, 26 Feb 2025 11:23:13 +0100 + +linux (6.14.0-4.4) plucky; urgency=medium + + * plucky/linux: 6.14.0-4.4 -proposed tracker (LP: #2098875) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2025.02.11) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [1/53]: Stacking: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [2/53]: Stacking: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [3/53]: Stacking: LSM: security_lsmblob_to_secctx + module selection + - SAUCE: apparmor4.0.0 [4/53]: Stacking: Audit: Add record for multiple task + security contexts + - SAUCE: apparmor4.0.0 [5/53]: Stacking: Audit: multiple subject lsm values + for netlabel + - SAUCE: apparmor4.0.0 [6/53]: Stacking: Audit: Add record for multiple object + contexts + - SAUCE: apparmor4.0.0 [7/53]: Stacking: LSM: Single calls in secid hooks + - SAUCE: apparmor4.0.0 [8/53]: Stacking: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [9/53]: Stacking: Audit: Call only the first of the + audit rule hooks + - SAUCE: apparmor4.0.0 [10/53]: Stacking: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [11/53]: 6.15 apparmor-next: apparmor: Use str_yes_no() + helper function + - SAUCE: apparmor4.0.0 [12/53]: 6.15 apparmor-next: apparmor: Improve debug + print infrastructure + - SAUCE: apparmor4.0.0 [13/53]: 6.15 apparmor-next: apparmor: cleanup: + attachment perm lookup to use lookup_perms() + - SAUCE: apparmor4.0.0 [14/53]: 6.15 apparmor-next: apparmor: remove redundant + unconfined check. + - SAUCE: apparmor4.0.0 [15/53]: 6.15 apparmor-next: apparmor: switch signal + mediation to use RULE_MEDIATES + - SAUCE: apparmor4.0.0 [16/53]: 6.15 apparmor-next: apparmor: ensure labels + with more than one entry have correct flags + - SAUCE: apparmor4.0.0 [17/53]: 6.15 apparmor-next: apparmor: remove explicit + restriction that unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [18/53]: 6.15 apparmor-next: apparmor: cleanup: + refactor file_perm() to doc semantics of some checks + - SAUCE: apparmor4.0.0 [19/53]: 6.15 apparmor-next: apparmor: carry mediation + check on label + - SAUCE: apparmor4.0.0 [20/53]: 6.15 apparmor-next: apparmor: add additional + flags to extended permission. + - SAUCE: apparmor4.0.0 [21/53]: 6.15 apparmor-next: apparmor: add support for + profiles to define the kill signal + - SAUCE: apparmor4.0.0 [22/53]: 6.15 apparmor-next: apparmor: fix + x_table_lookup when stacking is not the first entry + - SAUCE: apparmor4.0.0 [23/53]: 6.15 apparmor-next: apparmor: add ability to + mediate caps with policy state machine + - SAUCE: apparmor4.0.0 [24/53]: 6.15 apparmor-next: apparmor: remove af_select + macro + - SAUCE: apparmor4.0.0 [25/53]: 6.15 apparmor-next: apparmor: lift kernel + socket check out of critical section + - SAUCE: apparmor4.0.0 [26/53]: 6.15 apparmor-next: apparmor: in preparation + for finer networking rules rework match_prot + - SAUCE: apparmor4.0.0 [27/53]: 6.15 apparmor-next: apparmor: add fine grained + af_unix mediation + - SAUCE: apparmor4.0.0 [28/53]: 6.15 apparmor-next: apparmor: gate make fine + grained unix mediation behind v9 abi + - SAUCE: apparmor4.0.0 [29/53]: 6.15 apparmor-next: apparmor: fix dbus + permission queries to v9 ABI + - SAUCE: apparmor4.0.0 [30/53]: 6.15 apparmor-next: apparmor: Fix checking + address of an array in accum_label_info() + - SAUCE: apparmor4.0.0 [31/53]: 6.15 apparmor-next: apparmor: Modify + mismatched function name + - SAUCE: apparmor4.0.0 [32/53]: 6.15 apparmor-next: apparmor: Modify + mismatched function name + - SAUCE: apparmor4.0.0 [33/53]: 6.15 apparmor-next: apparmor: fix typos and + spelling errors + - SAUCE: apparmor4.0.0 [34/53]: 6.15 apparmor-next: apparmor: use the + condition in AA_BUG_FMT even with debug disabled + - SAUCE: apparmor4.0.0 [35/53]: 6.15 apparmor-next: apparmor: Remove unused + variable 'sock' in __file_sock_perm() + - SAUCE: apparmor4.0.0 [36/53]: Revert "6.15 apparmor-next: apparmor: fix dbus + permission queries to v9 ABI" + - SAUCE: apparmor4.0.0 [37/53]: Revert "6.15 apparmor-next: apparmor: gate + make fine grained unix mediation behind v9 abi" + - SAUCE: apparmor4.0.0 [38/53]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [39/53]: apparmor: make debug_values_table static + - SAUCE: apparmor4.0.0 [40/53]: apparmor: Document that label must be last + member in struct aa_profile + - SAUCE: apparmor4.0.0 [41/53]: apparmor: transition from a list of rules to a + vector of rules + - SAUCE: apparmor4.0.0 [42/53]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [43/53]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [44/53]: add unprivileged user ns mediation + - SAUCE: apparmor4.0.0 [45/53]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/53]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [48/53]: apparmor: allow profile to be transitioned + when a userns is created + - SAUCE: apparmor4.0.0 [49/53]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [51/53]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [52/53]: add io_uring mediation + - SAUCE: apparmor4.0.0 [53/53]: enable userspace upcall for mediation + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [46/53]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - [Packaging] disable signing for ppc64el + - [Packaging] disable signing for s390x + - [packaging] rename to linux + - [Config] update RUSTC version + - [packaging] remove $(wildcard $(DEBIAN)/control.d/*) dependency + - [packaging] avoid piping control-create for error detection + - [packaging] split flavour-control.stub + - [packaging] generate debian/control with correct signed/unsigned + - [packaging] remove DESC and =HUMAN= substitution + - [Packaging] remove unnecessary dependency on control.stub + - [Packaging] add .gitignore and clean more files + - SAUCE: apparmor4.0.0 [50/53]: apparmor: audit mqueue-via-path access as + getattr instead of unlink + - [Packaging] debian.master/dkms-versions -- remove ipu6-drivers, + ipu7-drivers, backport-iwlwifi-dkms and mofed-modules-24.10 FTBFS + + -- Paolo Pisati Thu, 20 Feb 2025 14:20:53 +0100 + +linux-unstable (6.14.0-3.3) plucky; urgency=medium + + * plucky/linux-unstable: 6.14.0-3.3 -proposed tracker (LP: #2098836) + + * RISC-V kernel config is out of sync with other archs (LP: #1981437) + - [Config] riscv64: Sync config with other architectures + + * Miscellaneous Ubuntu changes + - SAUCE: platform/x86: int3472: fixup s/polarity/gpio_flags/ + - [Config] riscv64: Disable CONFIG_ARCH_RENESAS + - [Config] riscv64: Disable Andes vendor extensions + - [Config] riscv64: Set CONFIG_MMC_SPI=m like other architectures + - [Config] riscv64: Enable Svpbmt support + - [Config] riscv64: Disable kernel compression + - [packaging] enable ppc64el signing + - [Config] updateconfigs + + -- Paolo Pisati Wed, 19 Feb 2025 16:38:27 +0100 + +linux-unstable (6.14.0-2.2) plucky; urgency=medium + + * plucky/linux-unstable: 6.14.0-2.2 -proposed tracker (LP: #2097828) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.14-rc2 rebase + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Build all packages for linux-unstable" + + -- Paolo Pisati Tue, 11 Feb 2025 10:11:13 +0100 + +linux-unstable (6.14.0-1.1) plucky; urgency=medium + + * [25.04 FEAT] In-kernel crypto support MSA 11 HMAC (LP: #2096812) + - [Config] Change CONFIG_CRYPTO_HMAC_S390 to m for s390x + + * Miscellaneous Ubuntu changes + - Update dropped.txt (MODVERSION patches for Rust) + - [Config] updateconfigs following v6.14-rc1 rebase + - SAUCE: binder: turn into module - list_lru_add()/list_lru_del() + - SAUCE: binder: turn into module - lock_vma_under_rcu() + - [Config] temporarily disable DRM_HISI_HIBMC, FTBFS + - dkms: remove zfs, FTBFS + - [Config] armhf: disable TEGRA210_ADMA, FTBFS + + -- Paolo Pisati Fri, 07 Feb 2025 09:41:02 +0100 + +linux-unstable (6.13.0-2.2) plucky; urgency=medium + + * plucky/linux-unstable: 6.13.0-2.2 -proposed tracker (LP: #2096822) + + * Failed to probe for OVTI02C1: chip id mismatch: 560243!=0 (LP: #2090932) + - SAUCE: ACPI: scan: Update HID for new platform + + * Miscellaneous Ubuntu changes + - [Packaging]: Fix linux-bpf-dev build error for non-main kernels + - [Packaging] perf: enable debuginfod support + - [Config] toolchain version update + + -- Timo Aaltonen Tue, 28 Jan 2025 11:15:49 +0200 + +linux-unstable (6.13.0-1.1) plucky; urgency=medium + + * plucky/linux-unstable: 6.13.0-1.1 -proposed tracker (LP: #2096776) + + * Miscellaneous Ubuntu changes + - [Packaging] Rename to linux-unstable, bump version + - [Config] updateconfigs following v6.13 rebase + - [Config] toolchain version update + + -- Timo Aaltonen Mon, 27 Jan 2025 17:54:43 +0200 + +linux-unstable (6.13.0-0.0) plucky; urgency=medium + + * Dummy entry. + + -- Timo Aaltonen Mon, 20 Jan 2025 13:35:31 +0200 + +linux (6.12.0-10.10) plucky; urgency=medium + + * plucky/linux: 6.12.0-10.10 -proposed tracker (LP: #2092288) + + * Miscellaneous Ubuntu changes + - [Config] toolchain version update + - [Packaging] Update to clang-19 and newer rustc + - [Config] Re-enable rust support + + -- Paolo Pisati Sun, 29 Dec 2024 11:25:01 +0100 + +linux (6.12.0-9.9) plucky; urgency=medium + + * plucky/linux: 6.12.0-9.9 -proposed tracker (LP: #2092219) + + * Miscellaneous Ubuntu changes + - [Packaging] rules: Fix raw_kernelversion + + -- Paolo Pisati Fri, 20 Dec 2024 10:17:18 +0100 + +linux (6.12.0-8.8) plucky; urgency=medium + + * plucky/linux: 6.12.0-8.8 -proposed tracker (LP: #2092077) + + * Intel AX211 wireless module [8086:7740] subsys [8086:4090] wrongly + recognized as BE201 (LP: #2091546) + - SAUCE: wifi: iwlwifi: fix CRF name for Bz + + * When /dev/vmbus/hv_kvp is not present, disable hv-kvp-daemon (LP: #2091744) + - [Packaging] disable hv-kvp-daemon if needed + + * Miscellaneous Ubuntu changes + - [Packaging] linux-bpf-dev: Restructure packaging + - [Packaging] linux-bpf-dev: Skip packaging for additional kernel flavors + - [Packaging] rules: Convert install-arch-headers to a stamped target + - [Packaging] rules: Fold config check into stamp-prepare-% target + - [Packaging] rules: Fold module signature check into stamp-install-% target + - [Packaging] rules: Remove inclusion of 4-checks.mk + - [Packaging] rules: Remove build tests + - [Packaging] rules: Clean up install-perarch target + - [Packaging] rules: Move the ABI build directory to debian/build + - [Packaging] rules: Introduce global abi_dir variable + - [Packaging] rules: Introduce global build_dir variable + - [Packaging] rules: Remove target_flavour variable + - [Packaging] rules: Remove unused confdir variables + - [Packaging] rules: Remove undefined variables prev_{abinum, revisions} + - [Packaging] rules: Remove explicit kernel compression + - [Packaging] rules: Remove ship_extras_package feature + - [Packaging] rules: Remove stamps/stamp-prepare-indep target + - [Packaging] rules: Explicitly set do_*tools* variables to false + - [Packaging] rules: Wrap do_linux_tools around bpftool install/usage + + -- Paolo Pisati Thu, 19 Dec 2024 15:10:50 +0100 + +linux (6.12.0-7.7) plucky; urgency=medium + + * plucky/linux: 6.12.0-7.7 -proposed tracker (LP: #2091852) + + * Miscellaneous Ubuntu changes + - remove the AA stack + + * Remove the entire AA stack (FTBFS) + + -- Paolo Pisati Wed, 18 Dec 2024 14:55:25 +0100 + +linux (6.12.0-6.6) plucky; urgency=medium + + * plucky/linux: 6.12.0-6.6 -proposed tracker (LP: #2091721) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [29/84]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [30/84]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [31/84]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [32/84]: af_unix mediation + - SAUCE: apparmor4.0.0 [33/84]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [35/84]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [36/84]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [37/84]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [38/84]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [39/84]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [40/84]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [41/84]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [42/84]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [43/84]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [44/84]: prompt - fix caching + - SAUCE: apparmor4.0.0 [45/84]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [46/84]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [47/84]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [48/84]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [49/84]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [50/84]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/93] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [55/84]: add io_uring mediation + - SAUCE: apparmor4.0.0 [56/84]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [57/84]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [58/84]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [59/84]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [60/84]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [61/84]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [62/84]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [63/84]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [64/84]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [65/84]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [66/84]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [67/84]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [68/84]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [69/84]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [70/84]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [71/84]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [72/84]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [73/84]: fixup notify + - SAUCE: apparmor4.0.0 [74/84]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [75/84]: apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [76/84]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0 [77/84]: fix reserved mem for when we save ipv6 + addresses + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * linux-gcp 6.8.0-1005.5 (+ others) Noble kernel regression with new apparmor + profiles/features (LP: #2061851) + - SAUCE: apparmor4.0.0 [78/84]: fix address mapping for recvfrom + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [52/84]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [53/84]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [54/84]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - [packaging] rename to linux + - SAUCE: apparmor4.0.0 [1/84]: LSM: Add the lsm_prop data structure. + - SAUCE: apparmor4.0.0 [2/84]: LSM: Use lsm_prop in security_audit_rule_match + - SAUCE: apparmor4.0.0 [3/84]: LSM: Add lsmprop_to_secctx hook + - SAUCE: apparmor4.0.0 [4/84]: Audit: maintain an lsm_prop in audit_context + - SAUCE: apparmor4.0.0 [5/84]: LSM: Use lsm_prop in security_ipc_getsecid + - SAUCE: apparmor4.0.0 [6/84]: Audit: Update shutdown LSM data + - SAUCE: apparmor4.0.0 [7/84]: LSM: Use lsm_prop in security_current_getsecid + - SAUCE: apparmor4.0.0 [8/84]: LSM: Use lsm_prop in security_inode_getsecid + - SAUCE: apparmor4.0.0 [9/84]: Audit: use an lsm_prop in audit_names + - SAUCE: apparmor4.0.0 [10/84]: LSM: Create new security_cred_getlsmprop LSM + hook + - SAUCE: apparmor4.0.0 [11/84]: Audit: Change context data from secid to + lsm_prop + - SAUCE: apparmor4.0.0 [12/84]: Use lsm_prop for audit data + - SAUCE: apparmor4.0.0 [13/84]: LSM: Remove lsm_prop scaffolding + - SAUCE: apparmor4.0.0 [14/84]: LSM: Ensure the correct LSM context releaser + - SAUCE: apparmor4.0.0 [15/84]: LSM: Replace context+len with lsm_context + - SAUCE: apparmor4.0.0 [16/84]: LSM: Use lsm_context in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [17/84]: LSM: lsm_context in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [18/84]: LSM: secctx provider check on release + - SAUCE: apparmor4.0.0 [19/84]: LSM: Use lsm_context in + security_inode_notifysecctx + - SAUCE: apparmor4.0.0 [20/84]: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [21/84]: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [22/84]: LSM: security_lsmblob_to_secctx module + selection + - SAUCE: apparmor4.0.0 [23/84]: Audit: Add record for multiple task security + contexts + - SAUCE: apparmor4.0.0 [24/84]: Audit: multiple subject lsm values for + netlabel + - SAUCE: apparmor4.0.0 [25/84]: Audit: Add record for multiple object contexts + - SAUCE: apparmor4.0.0 [26/84]: LSM: Single calls in secid hooks + - SAUCE: apparmor4.0.0 [27/84]: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [28/84]: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [34/84]: fixup inode_set_attr + - SAUCE: apparmor4.0.0 [79/84]: apparmor: add support for 2^24 states to the + dfa state machine. + - SAUCE: apparmor4.0.0 [80/84]: apparmor: advertise to userspace support of + user upcall for file rules. + - SAUCE: apparmor4.0.0 [81/84]: apparmor: allocate xmatch for nullpdf inside + aa_alloc_null + - SAUCE: apparmor4.0.0 [82/84]: apparmor: properly handle cx/px lookup failure + for complain + - SAUCE: apparmor4.0.0 [83/84]: apparmor: fix prompt failing during large down + loads + - SAUCE: apparmor4.0.0 [84/84]: apparmor: fix allow field in notification + + -- Paolo Pisati Fri, 13 Dec 2024 16:35:21 +0100 + +linux (6.12.0-5.5) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-5.5 -proposed tracker (LP: #2091628) + + * Plucky update: v6.12.4 upstream stable release (LP: #2091627) + - xfs: remove unknown compat feature check in superblock write validation + - quota: flush quota_release_work upon quota writeback + - btrfs: drop unused parameter file_offset from + btrfs_encoded_read_regular_fill_pages() + - btrfs: change btrfs_encoded_read() so that reading of extent is done by + caller + - btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages() + - btrfs: fix use-after-free in btrfs_encoded_read_endio() + - btrfs: don't loop for nowait writes when checking for cross references + - btrfs: add a sanity check for btrfs root in btrfs_search_slot() + - btrfs: ref-verify: fix use-after-free after invalid ref action + - iommu/tegra241-cmdqv: Fix unused variable warning + - netkit: Add option for scrubbing skb meta data + - md/raid5: Wait sync io to finish before changing group cnt + - md/md-bitmap: Add missing destroy_work_on_stack() + - arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer + - arm64: dts: mediatek: mt8186-corsola: Fix GPU supply coupling max-spread + - arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay + - arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay + - arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity + - media: qcom: camss: fix error path on configuration of power domains + - media: amphion: Set video drvdata before register video device + - media: imx-jpeg: Set video drvdata before register video device + - media: mtk-jpeg: Fix null-ptr-deref during unload module + - media: i2c: dw9768: Fix pm_runtime_set_suspended() with runtime pm enabled + - arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay + - media: i2c: tc358743: Fix crash in the probe error path when using polling + - media: imx-jpeg: Ensure power suppliers be suspended before detach them + - media: platform: rga: fix 32-bit DMA limitation + - media: verisilicon: av1: Fix reference video buffer pointer assignment + - media: ts2020: fix null-ptr-deref in ts2020_probe() + - media: platform: exynos4-is: Fix an OF node reference leak in + fimc_md_is_isp_available + - efi/libstub: Free correct pointer on failure + - net: phy: dp83869: fix status reporting for 1000base-x autonegotiation + - media: amphion: Fix pm_runtime_set_suspended() with runtime pm enabled + - media: venus: Fix pm_runtime_set_suspended() with runtime pm enabled + - media: gspca: ov534-ov772x: Fix off-by-one error in set_frame_rate() + - media: ov08x40: Fix burst write sequence + - media: platform: allegro-dvt: Fix possible memory leak in + allocate_buffers_internal() + - media: uvcvideo: Stop stream during unregister + - media: uvcvideo: Require entities to have a non-zero unique ID + - tracing: Fix function timing profiler to initialize hashtable + - kunit: Fix potential null dereference in kunit_device_driver_test() + - kunit: string-stream: Fix a UAF bug in kunit_init_suite() + - ovl: Filter invalid inodes with missing lookup function + - maple_tree: refine mas_store_root() on storing NULL + - ftrace: Fix regression with module command in stack_trace_filter + - vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event + - zram: clear IDLE flag after recompression + - iommu/io-pgtable-arm: Fix stage-2 map/unmap for concatenated tables + - iommu/arm-smmu: Defer probe of clients after smmu device bound + - leds: lp55xx: Remove redundant test for invalid channel number + - mm/damon/vaddr: fix issue in damon_va_evenly_split_region() + - powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang + - cpufreq: scmi: Fix cleanup path when boost enablement fails + - clk: qcom: gcc-qcs404: fix initial rate of GPLL3 + - ad7780: fix division by zero in ad7780_write_raw() + - nvmem: core: Check read_only flag for force_ro in bin_attr_nvmem_write() + - driver core: fw_devlink: Stop trying to optimize cycle detection logic + - spmi: pmic-arb: fix return path in for_each_available_child_of_node() + - ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow + - s390/entry: Mark IRQ entries to fix stack depot warnings + - ARM: 9430/1: entry: Do a dummy read from VMAP shadow + - ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire() + - net: stmmac: set initial EEE policy configuration + - vfio/qat: fix overflow check in qat_vf_resume_write() + - PCI: qcom: Disable ASPM L0s for X1E80100 + - perf jevents: fix breakage when do perf stat on system metric + - remoteproc: qcom_q6v5_pas: disable auto boot for wpss + - PCI: imx6: Fix suspend/resume support on i.MX6QDL + - mm/slub: Avoid list corruption when removing a slab from the full list + - f2fs: fix to drop all discards after creating snapshot on lvm device + - ceph: extract entity name from device id + - ceph: pass cred pointer to ceph_mds_auth_match() + - ceph: fix cred leak in ceph_mds_check_access() + - mtd: spinand: winbond: Fix 512GW and 02JW OOB layout + - mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information + - util_macros.h: fix/rework find_closest() macros + - s390/stacktrace: Use break instead of return statement + - scsi: ufs: exynos: Add check inside exynos_ufs_config_smu() + - scsi: ufs: exynos: Fix hibern8 notify callbacks + - i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled + - i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() + - i3c: master: svc: fix possible assignment of the same address to two devices + - i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter + - PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible + - PCI: keystone: Add link up check to ks_pcie_other_map_bus() + - PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy() + - PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf() + - slab: Fix too strict alignment check in create_cache() + - fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful + iov_iter_zero + - thermal: int3400: Fix reading of current_uuid for active policy + - leds: flash: mt6360: Fix device_for_each_child_node() refcounting in error + paths + - ovl: properly handle large files in ovl_security_fileattr + - mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address + into one operation + - dm: Fix typo in error message + - dm thin: Add missing destroy_work_on_stack() + - PCI: dwc: ep: Fix advertised resizable BAR size regression + - PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes + - PCI: rockchip-ep: Fix address translation unit programming + - nfsd: make sure exp active before svc_export_show + - nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur + - iio: accel: kx022a: Fix raw read format + - iio: invensense: fix multiple odr switch when FIFO is off + - iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() + - iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer + - iio: gts: fix infinite loop for gain_to_scaletables() + - powerpc: Fix stack protector Kconfig test for clang + - powerpc: Adjust adding stack protector flags to KBUILD_CLAGS for clang + - binder: fix node UAF in binder_add_freeze_work() + - binder: fix OOB in binder_add_freeze_work() + - binder: fix freeze UAF in binder_release_work() + - binder: fix BINDER_WORK_FROZEN_BINDER debug logs + - binder: fix BINDER_WORK_CLEAR_FREEZE_NOTIFICATION debug logs + - binder: allow freeze notification for dead nodes + - binder: fix memleak of proc->delivered_freeze + - binder: add delivered_freeze to debugfs output + - dt-bindings: net: fec: add pps channel property + - net: fec: refactor PPS channel configuration + - net: fec: make PPS channel configurable + - drm/panic: Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n + - drm/sti: avoid potential dereference of error pointers in + sti_hqvdp_atomic_check + - drm/sti: avoid potential dereference of error pointers in + sti_gdp_atomic_check + - drm: panel: jd9365da-h3: Remove unused num_init_cmds structure member + - drm/sti: avoid potential dereference of error pointers + - drm/fbdev-dma: Select FB_DEFERRED_IO + - drm/mediatek: Fix child node refcount handling in early exit + - drm/bridge: it6505: Fix inverted reset polarity + - drm/etnaviv: flush shader L1 cache after user commandstream + - drm: xlnx: zynqmp_dpsub: fix hotplug detection + - drm/xe/xe_guc_ads: save/restore OA registers and allowlist regs + - drm/xe/migrate: fix pat index usage + - Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable" + - drm/xe/migrate: use XE_BO_FLAG_PAGETABLE + - drm/xe/guc_submit: fix race around suspend_pending + - drm/amdkfd: Use the correct wptr size + - drm/amdgpu/pm: add gen5 display to the user on smu v14.0.2/3 + - drm/amd: Add some missing straps from NBIO 7.11.0 + - drm/amdgpu: fix usage slab after free + - drm/amd/pm: skip setting the power source on smu v14.0.2/3 + - drm/amd: Fix initialization mistake for NBIO 7.11 devices + - drm/amd/pm: update current_socclk and current_uclk in gpu_metrics on smu + v13.0.7 + - drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3 + - drm/amd/pm: Remove arcturus min power limit + - drm/amd/display: Fix handling of plane refcount + - drm/amd/display: update pipe selection policy to check head pipe + - drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dto + - posix-timers: Target group sigqueue to current task only if not exiting + - Revert "drm/xe/xe_guc_ads: save/restore OA registers and allowlist regs" + - Linux 6.12.4 + + * Plucky update: v6.12.3 upstream stable release (LP: #2091626) + - sched: Initialize idle tasks only once + - Linux 6.12.3 + + * Plucky update: v6.12.2 upstream stable release (LP: #2091625) + - MAINTAINERS: appoint myself the XFS maintainer for 6.12 LTS + - drm/amd/display: Skip Invalid Streams from DSC Policy + - drm/amd/display: Fix incorrect DSC recompute trigger + - s390/facilities: Fix warning about shadow of global variable + - s390/virtio_ccw: Fix dma_parm pointer not set up + - efs: fix the efs new mount api implementation + - arm64: probes: Disable kprobes/uprobes on MOPS instructions + - kselftest/arm64: hwcap: fix f8dp2 cpuinfo name + - kselftest/arm64: mte: fix printf type warnings about __u64 + - kselftest/arm64: mte: fix printf type warnings about longs + - block/fs: Pass an iocb to generic_atomic_write_valid() + - fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid() + - s390/cio: Do not unregister the subchannel based on DNV + - s390/pageattr: Implement missing kernel_page_present() + - x86/pvh: Call C code via the kernel virtual mapping + - brd: defer automatic disk creation until module initialization succeeds + - ext4: avoid remount errors with 'abort' mount option + - mips: asm: fix warning when disabling MIPS_FP_SUPPORT + - s390/cpum_sf: Fix and protect memory allocation of SDBs with mutex + - initramfs: avoid filename buffer overrun + - arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers + - kselftest/arm64: Fix encoding for SVE B16B16 test + - nvme-pci: fix freeing of the HMB descriptor table + - m68k: mvme147: Fix SCSI controller IRQ numbers + - m68k: mvme147: Reinstate early console + - arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG + - acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block() + - loop: fix type of block size + - cachefiles: Fix incorrect length return value in + cachefiles_ondemand_fd_write_iter() + - cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter() + - cachefiles: Fix NULL pointer dereference in object->file + - netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING + - block: take chunk_sectors into account in bio_split_write_zeroes + - block: fix bio_split_rw_at to take zone_write_granularity into account + - s390/syscalls: Avoid creation of arch/arch/ directory + - hfsplus: don't query the device logical block size multiple times + - ext4: fix race in buffer_head read fault injection + - nvme-pci: reverse request order in nvme_queue_rqs + - virtio_blk: reverse request order in virtio_queue_rqs + - crypto: mxs-dcp - Fix AES-CBC with hardware-bound keys + - crypto: caam - Fix the pointer passed to caam_qi_shutdown() + - crypto: qat - remove check after debugfs_create_dir() + - crypto: qat/qat_420xx - fix off by one in uof_get_name() + - crypto: qat/qat_4xxx - fix off by one in uof_get_name() + - firmware: google: Unregister driver_info on failure + - EDAC/bluefield: Fix potential integer overflow + - crypto: qat - remove faulty arbiter config reset + - thermal: core: Initialize thermal zones before registering them + - thermal: core: Rearrange PM notification code + - thermal: core: Represent suspend-related thermal zone flags as bits + - thermal: core: Mark thermal zones as initializing to start with + - thermal: core: Fix race between zone registration and system suspend + - EDAC/fsl_ddr: Fix bad bit shift operations + - EDAC/skx_common: Differentiate memory error sources + - EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator + - crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return + -EBUSY + - crypto: cavium - Fix the if condition to exit loop after timeout + - cpufreq/amd-pstate: Don't update CPPC request in + amd_pstate_cpu_boost_update() + - amd-pstate: Set min_perf to nominal_perf for active mode performance gov + - crypto: hisilicon/qm - disable same error report before resetting + - EDAC/igen6: Avoid segmentation fault on module unload + - crypto: qat - Fix missing destroy_workqueue in adf_init_aer() + - crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init() + - sched/cpufreq: Ensure sd is rebuilt for EAS check + - doc: rcu: update printed dynticks counter bits + - rcu/srcutiny: don't return before reenabling preemption + - rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu + - rcu/nocb: Fix missed RCU barrier on deoffloading + - hwmon: (pmbus/core) clear faults after setting smbalert mask + - hwmon: (nct6775-core) Fix overflows seen when writing limit attributes + - ACPI: CPPC: Fix _CPC register setting issue + - thermal: testing: Use DEFINE_FREE() and __free() to simplify code + - thermal: testing: Initialize some variables annoteded with _free() + - crypto: caam - add error check to caam_rsa_set_priv_key_form + - crypto: bcm - add error check in the ahash_hmac_init function + - crypto: cavium - Fix an error handling path in cpt_ucode_load_fw() + - rcuscale: Do a proper cleanup if kfree_scale_init() fails + - tools/lib/thermal: Make more generic the command encoding function + - thermal/lib: Fix memory leak on error in thermal_genl_auto() + - x86/unwind/orc: Fix unwind for newly forked tasks + - Revert "scripts/faddr2line: Check only two symbols when calculating symbol + size" + - cleanup: Remove address space of returned pointer + - time: Partially revert cleanup on msecs_to_jiffies() documentation + - time: Fix references to _msecs_to_jiffies() handling of values + - timers: Add missing READ_ONCE() in __run_timer_base() + - locking/atomic/x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() + - locking/atomic/x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() + - kcsan, seqlock: Support seqcount_latch_t + - kcsan, seqlock: Fix incorrect assumption in read_seqbegin() + - sched/ext: Remove sched_fork() hack + - locking/rt: Add sparse annotation PREEMPT_RT's sleeping locks. + - rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT + - clocksource/drivers:sp804: Make user selectable + - clocksource/drivers/timer-ti-dm: Fix child node refcount handling + - irqchip/riscv-aplic: Prevent crash when MSI domain is missing + - regulator: qcom-smd: make smd_vreg_rpm static + - spi: spi-fsl-lpspi: Use IRQF_NO_AUTOEN flag in request_irq() + - arm64: dts: qcom: qcs6390-rb3gen2: use modem.mbn for modem DSP + - ARM: dts: renesas: genmai: Fix partition size for QSPI NOR Flash + - drivers: soc: xilinx: add the missing kfree in xlnx_add_cb_for_suspend() + - microblaze: Export xmb_manager functions + - arm64: dts: mediatek: mt8188: Fix wrong clock provider in MFG1 power domain + - arm64: dts: mediatek: mt8395-genio-1200-evk: Fix dtbs_check error for phy + - arm64: dts: mt8195: Fix dtbs_check error for mutex node + - arm64: dts: mt8195: Fix dtbs_check error for infracfg_ao node + - arm64: dts: mediatek: mt8183-kukui: Disable DPI display interface + - arm64: dts: mt8183: Add port node to dpi node + - soc: ti: smartreflex: Use IRQF_NO_AUTOEN flag in request_irq() + - soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get() + - arm64: dts: qcom: sm6350: Fix GPU frequencies missing on some speedbins + - arm64: dts: qcom: sda660-ifc6560: fix l10a voltage ranges + - ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode + - mmc: mmc_spi: drop buggy snprintf() + - scripts/kernel-doc: Do not track section counter across processed files + - arm64: dts: qcom: x1e80100-slim7x: Drop orientation-switch from USB SS[0-1] + QMP PHYs + - arm64: dts: qcom: x1e80100-vivobook-s15: Drop orientation-switch from USB + SS[0-1] QMP PHYs + - openrisc: Implement fixmap to fix earlycon + - efi/libstub: fix efi_parse_options() ignoring the default command line + - tpm: fix signed/unsigned bug when checking event logs + - media: i2c: max96717: clean up on error in max96717_subdev_init() + - media: i2c: vgxy61: Fix an error handling path in vgxy61_detect() + - media: i2c: ds90ub960: Fix missing return check on ub960_rxport_read call + - arm64: dts: mt8183: krane: Fix the address of eeprom at i2c4 + - arm64: dts: mt8183: kukui: Fix the address of eeprom at i2c4 + - arm64: dts: qcom: x1e80100: Resize GIC Redistributor register region + - kernel-doc: allow object-like macros in ReST output + - arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs + - gpio: sloppy-logic-analyzer remove reference to rcu_momentary_dyntick_idle() + - arm64: dts: mediatek: mt8173-elm-hana: Add vdd-supply to second source + trackpad + - arm64: dts: mediatek: mt8188: Fix USB3 PHY port default status + - arm64: dts: mediatek: mt8195-cherry: Use correct audio codec DAI + - Revert "cgroup: Fix memory leak caused by missing cgroup_bpf_offline" + - cgroup/bpf: only cgroup v2 can be attached by bpf programs + - regulator: rk808: Restrict DVS GPIOs to the RK808 variant only + - power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF + - arm64: tegra: p2180: Add mandatory compatible for WiFi node + - arm64: dts: rockchip: Remove 'enable-active-low' from two boards + - arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-ns + - arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-ns + - arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-ns + - arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-ns + - pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle + - ARM: dts: cubieboard4: Fix DCDC5 regulator constraints + - arm64: dts: ti: k3-j7200: Fix register map for main domain pmx + - arm64: dts: ti: k3-j7200: Fix clock ids for MCSPI instances + - arm64: dts: ti: k3-j721e: Fix clock IDs for MCSPI instances + - arm64: dts: ti: k3-j721s2: Fix clock IDs for MCSPI instances + - watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 + - arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers + - dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries + - of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify + - pmdomain: ti-sci: Add missing of_node_put() for args.np + - spi: tegra210-quad: Avoid shift-out-of-bounds + - spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time​ + - regmap: irq: Set lockdep class for hierarchical IRQ domains + - arm64: dts: renesas: hihope: Drop #sound-dai-cells + - arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and + output-high in GPIO + - arm64: dts: mediatek: mt6358: fix dtbs_check error + - arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply names + - arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed + regulators + - selftests/resctrl: Print accurate buffer size as part of MBM results + - selftests/resctrl: Fix memory overflow due to unhandled wraparound + - selftests/resctrl: Protect against array overrun during iMC config parsing + - firmware: arm_scpi: Check the DVFS OPP count returned by the firmware + - media: ipu6: Fix DMA and physical address debugging messages for 32-bit + - media: ipu6: not override the dma_ops of device in driver + - media: ipu6: remove architecture DMA ops dependency in Kconfig + - pwm: Assume a disabled PWM to emit a constant inactive output + - media: atomisp: Add check for rgby_data memory allocation failure + - arm64: dts: rockchip: correct analog audio name on Indiedroid Nova + - sched_ext: scx_bpf_dispatch_from_dsq_set_*() are allowed from unlocked + context + - HID: hyperv: streamline driver probe to avoid devres issues + - platform/x86: asus-wmi: Fix inconsistent use of thermal policies + - platform/x86/intel/pmt: allow user offset for PMT callbacks + - platform/x86: panasonic-laptop: Return errno correctly in show callback + - drm/imagination: Convert to use time_before macro + - drm/imagination: Use pvr_vm_context_get() + - drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused + - drm/vc4: hvs: Don't write gamma luts on 2711 + - drm/vc4: hdmi: Avoid hang with debug registers when suspended + - drm/vc4: hvs: Fix dlist debug not resetting the next entry pointer + - drm/vc4: hvs: Remove incorrect limit from hvs_dlist debugfs function + - drm/vc4: hvs: Correct logic on stopping an HVS channel + - wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service() + - drm/omap: Fix possible NULL dereference + - drm/omap: Fix locking in omap_gem_new_dmabuf() + - drm/v3d: Appease lockdep while updating GPU stats + - wifi: p54: Use IRQF_NO_AUTOEN flag in request_irq() + - wifi: mwifiex: Use IRQF_NO_AUTOEN flag in request_irq() + - udmabuf: change folios array from kmalloc to kvmalloc + - udmabuf: fix vmap_udmabuf error page set + - drm/imx/dcss: Use IRQF_NO_AUTOEN flag in request_irq() + - drm/imx/ipuv3: Use IRQF_NO_AUTOEN flag in request_irq() + - drm/panel: nt35510: Make new commands optional + - drm/v3d: Address race-condition in MMU flush + - drm/v3d: Flush the MMU before we supply more memory to the binner + - drm/amdgpu: Fix JPEG v4.0.3 register write + - wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss1 + - wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss2 + - wifi: ath12k: Skip Rx TID cleanup for self peer + - dt-bindings: vendor-prefixes: Add NeoFidelity, Inc + - ASoC: fsl_micfil: fix regmap_write_bits usage + - ASoC: dt-bindings: mt6359: Update generic node name and dmic-mode + - drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module + - ASoC: fsl-asoc-card: Add missing handling of {hp,mic}-dt-gpios + - drm/bridge: anx7625: Drop EDID cache on bridge power off + - drm/bridge: it6505: Drop EDID cache on bridge power off + - libbpf: Fix expected_attach_type set handling in program load callback + - libbpf: Fix output .symtab byte-order during linking + - selftests/bpf: Fix uprobe_multi compilation error + - dlm: fix swapped args sb_flags vs sb_status + - wifi: rtl8xxxu: Perform update_beacon_work when beaconing is enabled + - ASoC: amd: acp: fix for inconsistent indenting + - ASoC: amd: acp: fix for cpu dai index logic + - drm/amd/display: fix a memleak issue when driver is removed + - wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup() + - wifi: ath12k: fix one more memcpy size error + - libbpf: Add missing per-arch include path + - selftests: bpf: Add missing per-arch include path + - bpf: Fix the xdp_adjust_tail sample prog issue + - selftests/bpf: Fix backtrace printing for selftests crashes + - wifi: ath11k: Fix CE offset address calculation for WCN6750 in SSR + - selftests/bpf: add missing header include for htons + - wifi: cfg80211: check radio iface combination for multi radio per wiphy + - ice: consistently use q_idx in ice_vc_cfg_qs_msg() + - drm/vc4: hdmi: Increase audio MAI fifo dreq threshold + - drm/vc4: Introduce generation number enum + - drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_lut_load + - drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_atomic_flush + - drm/vc4: Correct generation check in vc4_hvs_lut_load + - libbpf: fix sym_is_subprog() logic for weak global subprogs + - accel/ivpu: Prevent recovery invocation during probe and resume + - ASoC: rt722-sdca: Remove logically deadcode in rt722-sdca.c + - libbpf: never interpret subprogs in .text as entry programs + - netdevsim: copy addresses for both in and out paths + - drm/bridge: tc358767: Fix link properties discovery + - drm/panic: Select ZLIB_DEFLATE for DRM_PANIC_SCREEN_QR_CODE + - selftests/bpf: Fix msg_verify_data in test_sockmap + - selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap + - wifi: mwifiex: add missing locking for cfg80211 calls + - wifi: wilc1000: Set MAC after operation mode + - wifi: mwifiex: Fix memcpy() field-spanning write warning in + mwifiex_config_scan() + - drm: fsl-dcu: enable PIXCLK on LS1021A + - drm: panel: nv3052c: correct spi_device_id for RG35XX panel + - drm/msm/dpu: on SDM845 move DSPP_3 to LM_5 block + - drm/msm/dpu: drop LM_3 / LM_4 on SDM845 + - drm/msm/dpu: drop LM_3 / LM_4 on MSM8998 + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in cn10k.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dmac_flt.c + - octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c + - selftests/bpf: fix test_spin_lock_fail.c's global vars usage + - libbpf: move global data mmap()'ing into bpf_object__load() + - wifi: rtw89: rename rtw89_vif to rtw89_vif_link ahead for MLO + - wifi: rtw89: rename rtw89_sta to rtw89_sta_link ahead for MLO + - wifi: rtw89: read bss_conf corresponding to the link + - wifi: rtw89: read link_sta corresponding to the link + - wifi: rtw89: refactor VIF related func ahead for MLO + - wifi: rtw89: refactor STA related func ahead for MLO + - wifi: rtw89: tweak driver architecture for impending MLO support + - wifi: rtw89: Fix TX fail with A2DP after scanning + - wifi: rtw89: unlock on error path in rtw89_ops_unassign_vif_chanctx() + - drm/panfrost: Remove unused id_mask from struct panfrost_model + - bpf, arm64: Remove garbage frame for struct_ops trampoline + - drm/msm/adreno: Use IRQF_NO_AUTOEN flag in request_irq() + - drm/msm/gpu: Check the status of registration to PM QoS + - drm/xe/hdcp: Fix gsc structure check in fw check status + - drm/etnaviv: Request pages from DMA32 zone on addressing_limited + - drm/etnaviv: hold GPU lock across perfmon sampling + - drm/amd/display: Increase idle worker HPD detection time + - drm/amd/display: Reduce HPD Detection Interval for IPS + - drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new() + - drm: zynqmp_kms: Unplug DRM device before removal + - drm: xlnx: zynqmp_disp: layer may be null while releasing + - wifi: wfx: Fix error handling in wfx_core_init() + - wifi: cw1200: Fix potential NULL dereference + - drm/msm/dpu: cast crtc_clk calculation to u64 in _dpu_core_perf_calc_clk() + - bpf, bpftool: Fix incorrect disasm pc + - bpf: Tighten tail call checks for lingering locks, RCU, preempt_disable + - drm/vkms: Drop unnecessary call to drm_crtc_cleanup() + - drm/amdgpu: Fix the memory allocation issue in + amdgpu_discovery_get_nps_info() + - drm/amdkfd: Use dynamic allocation for CU occupancy array in + 'kfd_get_cu_occupancy()' + - bpf: Mark raw_tp arguments with PTR_MAYBE_NULL + - drm: use ATOMIC64_INIT() for atomic64_t + - netfilter: nf_tables: avoid false-positive lockdep splat on rule deletion + - netfilter: nf_tables: must hold rcu read lock while iterating expression + type list + - netfilter: nf_tables: must hold rcu read lock while iterating object type + list + - netlink: typographical error in nlmsg_type constants definition + - wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg() + - drm/panfrost: Add missing OPP table refcnt decremental + - drm/panthor: introduce job cycle and timestamp accounting + - drm/panthor: record current and maximum device clock frequencies + - drm/panthor: Fix OPP refcnt leaks in devfreq initialisation + - isofs: avoid memory leak in iocharset + - selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap + - selftests/bpf: Fix SENDPAGE data logic in test_sockmap + - selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap + - selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap + - bpf, sockmap: Several fixes to bpf_msg_push_data + - bpf, sockmap: Several fixes to bpf_msg_pop_data + - bpf, sockmap: Fix sk_msg_reset_curr + - ipv6: release nexthop on device removal + - selftests: net: really check for bg process completion + - wifi: cfg80211: Remove the Medium Synchronization Delay validity check + - wifi: iwlwifi: allow fast resume on ax200 + - wifi: iwlwifi: mvm: tell iwlmei when we finished suspending + - drm/amdgpu: fix ACA bank count boundary check error + - drm/amdgpu: Fix map/unmap queue logic + - drm/amdkfd: Fix wrong usage of INIT_WORK() + - bpf: Allow return values 0 and 1 for kprobe session + - bpf: Force uprobe bpf program to always return 0 + - selftests/bpf: skip the timer_lockup test for single-CPU nodes + - ipv6: Fix soft lockups in fib6_select_path under high next hop churn + - net: rfkill: gpio: Add check for clk_enable() + - Revert "wifi: iwlegacy: do not skip frames with bad FCS" + - bpf: Use function pointers count as struct_ops links count + - bpf: Add kernel symbol for struct_ops trampoline + - ALSA: usx2y: Use snd_card_free_when_closed() at disconnection + - ALSA: us122l: Use snd_card_free_when_closed() at disconnection + - ALSA: caiaq: Use snd_card_free_when_closed() at disconnection + - ALSA: 6fire: Release resources at card release + - i2c: dev: Fix memory leak when underlying adapter does not support I2C + - selftests: netfilter: Fix missing return values in conntrack_dump_flush + - Bluetooth: btintel_pcie: Add handshake between driver and firmware + - Bluetooth: btintel: Do no pass vendor events to stack + - Bluetooth: btmtk: adjust the position to init iso data anchor + - Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name() + - Bluetooth: ISO: Use kref to track lifetime of iso_conn + - Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending + - Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending + - Bluetooth: ISO: Send BIG Create Sync via hci_sync + - Bluetooth: fix use-after-free in device_for_each_child() + - xsk: Free skb when TX metadata options are invalid + - erofs: fix file-backed mounts over FUSE + - erofs: fix blksize < PAGE_SIZE for file-backed mounts + - erofs: handle NONHEAD !delta[1] lclusters gracefully + - dlm: fix dlm_recover_members refcount on error + - eth: fbnic: don't disable the PCI device twice + - net: txgbe: remove GPIO interrupt controller + - net: txgbe: fix null pointer to pcs + - netpoll: Use rcu_access_pointer() in netpoll_poll_lock + - wireguard: selftests: load nf_conntrack if not present + - bpf: fix recursive lock when verdict program return SK_PASS + - unicode: Fix utf8_load() error path + - cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged + - RDMA/core: Provide rdma_user_mmap_disassociate() to disassociate mmap pages + - RDMA/hns: Disassociate mmap pages for all uctx when HW is being reset + - pinctrl: renesas: rzg2l: Fix missing return in rzg2l_pinctrl_register() + - clk: mediatek: drop two dead config options + - trace/trace_event_perf: remove duplicate samples on the first tracepoint + event + - pinctrl: zynqmp: drop excess struct member description + - pinctrl: renesas: Select PINCTRL_RZG2L for RZ/V2H(P) SoC + - clk: qcom: videocc-sm8550: depend on either gcc-sm8550 or gcc-sm8650 + - iommu/s390: Implement blocking domain + - scsi: hisi_sas: Enable all PHYs that are not disabled by user during + controller reset + - powerpc/vdso: Flag VDSO64 entry points as functions + - mfd: tps65010: Use IRQF_NO_AUTOEN flag in request_irq() to fix race + - mfd: da9052-spi: Change read-mask to write-mask + - mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device + - mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device + - mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices + - mfd: intel_soc_pmic_bxtwc: Fix IRQ domain names duplication + - cpufreq: loongson2: Unregister platform_driver on failure + - powerpc/fadump: Refactor and prepare fadump_cma_init for late init + - powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init() + - mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE + - mtd: rawnand: atmel: Fix possible memory leak + - clk: Allow kunit tests to run without OF_OVERLAY enabled + - powerpc/mm/fault: Fix kfence page fault reporting + - iommu/tegra241-cmdqv: Staticize cmdqv_debugfs_dir + - clk: sophgo: avoid integer overflow in sg2042_pll_recalc_rate() + - mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in + RD_ANY_REG_OP + - powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore + - cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() + - cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() + - iommu/amd/pgtbl_v2: Take protection domain lock before invalidating TLB + - RDMA/hns: Fix an AEQE overflow error caused by untimely update of eq_db_ci + - RDMA/hns: Fix flush cqe error when racing with destroy qp + - RDMA/hns: Modify debugfs name + - RDMA/hns: Use dev_* printings in hem code instead of ibdev_* + - RDMA/hns: Fix cpu stuck caused by printings during reset + - RDMA/rxe: Fix the qp flush warnings in req + - RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey + - clk: sunxi-ng: d1: Fix PLL_AUDIO0 preset + - clk: renesas: rzg2l: Fix FOUTPOSTDIV clk + - RDMA/rxe: Set queue pair cur_qp_state when being queried + - RDMA/mlx5: Call dev_put() after the blocking notifier + - RDMA/core: Implement RoCE GID port rescan and export delete function + - RDMA/mlx5: Ensure active slave attachment to the bond IB device + - RISC-V: KVM: Fix APLIC in_clrip and clripnum write emulation + - riscv: kvm: Fix out-of-bounds array access + - clk: imx: lpcg-scu: SW workaround for errata (e10858) + - clk: imx: fracn-gppll: correct PLL initialization flow + - clk: imx: fracn-gppll: fix pll power up + - clk: imx: clk-scu: fix clk enable state save and restore + - clk: imx: imx8-acm: Fix return value check in + clk_imx_acm_attach_pm_domains() + - iommu/vt-d: Fix checks and print in dmar_fault_dump_ptes() + - iommu/vt-d: Fix checks and print in pgtable_walk() + - checkpatch: always parse orig_commit in fixes tag + - mfd: rt5033: Fix missing regmap_del_irq_chip() + - leds: max5970: Fix unreleased fwnode_handle in probe function + - leds: ktd2692: Set missing timing properties + - fs/proc/kcore.c: fix coccinelle reported ERROR instances + - scsi: target: Fix incorrect function name in pscsi_create_type_disk() + - scsi: bfa: Fix use-after-free in bfad_im_module_exit() + - scsi: fusion: Remove unused variable 'rc' + - scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() + - scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() + - scsi: sg: Enable runtime power management + - x86/tdx: Introduce wrappers to read and write TD metadata + - x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup() + - x86/tdx: Dynamically disable SEPT violations from causing #VEs + - powerpc/fadump: allocate memory for additional parameters early + - fadump: reserve param area if below boot_mem_top + - RDMA/hns: Fix out-of-order issue of requester when setting FENCE + - RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() + - cpufreq: loongson3: Check for error code from devm_mutex_init() call + - cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost() + - cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power() + - kasan: move checks to do_strncpy_from_user + - kunit: skb: use "gfp" variable instead of hardcoding GFP_KERNEL + - ocfs2: fix uninitialized value in ocfs2_file_read_iter() + - zram: ZRAM_DEF_COMP should depend on ZRAM + - iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift + - dax: delete a stale directory pmem + - KVM: PPC: Book3S HV: Stop using vc->dpdes for nested KVM guests + - KVM: PPC: Book3S HV: Avoid returning to nested hypervisor on pending + doorbells + - powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static + - RDMA/hns: Fix different dgids mapping to the same dip_idx + - KVM: PPC: Book3S HV: Fix kmv -> kvm typo + - powerpc/kexec: Fix return of uninitialized variable + - fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem() + - RDMA/mlx5: Move events notifier registration to be after device registration + - clk: clk-apple-nco: Add NULL check in applnco_probe + - clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883 + - clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs + - clk: en7523: remove REG_PCIE*_{MEM,MEM_MASK} configuration + - clk: en7523: move clock_register in hw_init callback + - clk: en7523: introduce chip_scu regmap + - clk: en7523: fix estimation of fixed rate for EN7581 + - dt-bindings: clock: axi-clkgen: include AXI clk + - clk: clk-axi-clkgen: make sure to enable the AXI bus clock + - zram: permit only one post-processing operation at a time + - zram: fix NULL pointer in comp_algorithm_show() + - RDMA/bnxt_re: Correct the sequence of device suspend + - arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw + - pinctrl: k210: Undef K210_PC_DEFAULT + - rtla/timerlat: Do not set params->user_workload with -U + - smb: cached directories can be more than root file handle + - mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks() + - mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb() + - x86: fix off-by-one in access_ok() + - perf cs-etm: Don't flush when packet_queue fills up + - gfs2: Rename GLF_VERIFY_EVICT to GLF_VERIFY_DELETE + - gfs2: Allow immediate GLF_VERIFY_DELETE work + - gfs2: Fix unlinked inode cleanup + - perf mem: Fix printing PERF_MEM_LVLNUM_{L2_MHB|MSC} + - dt-bindings: PCI: mediatek-gen3: Allow exact number of clocks only + - PCI: Fix reset_method_store() memory leak + - perf jevents: Don't stop at the first matched pmu when searching a events + table + - perf stat: Close cork_fd when create_perf_stat_counter() failed + - perf stat: Fix affinity memory leaks on error path + - perf trace: Keep exited threads for summary + - perf test attr: Add back missing topdown events + - rust: rbtree: fix `SAFETY` comments that should be `# Safety` sections + - f2fs: compress: fix inconsistent update of i_blocks in + release_compress_blocks and reserve_compress_blocks + - f2fs: fix null-ptr-deref in f2fs_submit_page_bio() + - mailbox, remoteproc: k3-m4+: fix compile testing + - f2fs: fix to account dirty data in __get_secs_required() + - perf dso: Fix symtab_type for kmod compression + - perf disasm: Fix capstone memory leak + - perf probe: Fix libdw memory leak + - perf probe: Correct demangled symbols in C++ program + - rust: kernel: fix THIS_MODULE header path in ThisModule doc comment + - rust: macros: fix documentation of the paste! macro + - PCI: cpqphp: Fix PCIBIOS_* return value confusion + - rust: block: fix formatting of `kernel::block::mq::request` module + - perf disasm: Use disasm_line__free() to properly free disasm_line + - perf disasm: Fix not cleaning up disasm_line in symbol__disassemble_raw() + - virtiofs: use pages instead of pointer for kernel direct IO + - perf ftrace latency: Fix unit on histogram first entry when using --use-nsec + - i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin + - f2fs: fix the wrong f2fs_bug_on condition in f2fs_do_replace_block + - f2fs: check curseg->inited before write_sum_page in change_curseg + - f2fs: Fix not used variable 'index' + - f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason() + - f2fs: fix to avoid use GC_AT when setting gc_mode as GC_URGENT_LOW or + GC_URGENT_MID + - PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is + supported + - PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert() + - PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert() + - PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds + - perf build: Add missing cflags when building with custom libtraceevent + - f2fs: fix race in concurrent f2fs_stop_gc_thread + - f2fs: fix to map blocks correctly for direct write + - f2fs: fix to avoid forcing direct write to use buffered IO on inline_data + inode + - perf trace: avoid garbage when not printing a trace event's arguments + - m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x + - m68k: coldfire/device.c: only build FEC when HW macros are defined + - svcrdma: Address an integer overflow + - nfsd: drop inode parameter from nfsd4_change_attribute() + - perf list: Fix topic and pmu_name argument order + - perf trace: Fix tracing itself, creating feedback loops + - perf trace: Do not lose last events in a race + - perf trace: Avoid garbage when not printing a syscall's arguments + - remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe() + - remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe() + - remoteproc: qcom: pas: add minidump_id to SM8350 resources + - rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length + - remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region + - PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' + - NFSD: Prevent NULL dereference in nfsd4_process_cb_update() + - NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir() + - nfsd: release svc_expkey/svc_export with rcu_work + - svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init() + - NFSD: Fix nfsd4_shutdown_copy() + - nfs_common: must not hold RCU while calling nfsd_file_put_local + - f2fs: fix to do cast in F2FS_{BLK_TO_BYTES, BTYES_TO_BLK} to avoid overflow + - perf bpf-filter: Return -ENOMEM directly when pfi allocation fails + - hwmon: (tps23861) Fix reporting of negative temperatures + - hwmon: (aquacomputer_d5next) Fix length of speed_input array + - phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in + airoha_pcie_phy_init_clk_out() + - phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in + airoha_pcie_phy_init_csr_2l() + - phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in + airoha_pcie_phy_init_ssc_jcpll() + - phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions + - vdpa/mlx5: Fix suboptimal range on iotlb iteration + - vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() + - vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data() + - selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels + - gpio: zevio: Add missed label initialisation + - vfio/pci: Properly hide first-in-list PCIe extended capability + - fs_parser: update mount_api doc to match function signature + - LoongArch: Fix build failure with GCC 15 (-std=gnu23) + - LoongArch: BPF: Sign-extend return values + - power: supply: core: Remove might_sleep() from power_supply_put() + - power: supply: bq27xxx: Fix registers of bq27426 + - power: supply: rt9471: Fix wrong WDT function regfield declaration + - power: supply: rt9471: Use IC status regfield to report real charger status + - fs/ntfs3: Equivalent transition from page to folio + - power: reset: ep93xx: add AUXILIARY_BUS dependency + - net: usb: lan78xx: Fix double free issue with interrupt buffer allocation + - net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device + - tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets + - net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL + configuration + - net: microchip: vcap: Add typegroup table terminators in kunit tests + - netlink: fix false positive warning in extack during dumps + - exfat: fix file being changed by unaligned direct write + - net/l2tp: fix warning in l2tp_exit_net found by syzbot + - s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() + - rtase: Refactor the rtase_check_mac_version_valid() function + - rtase: Correct the speed for RTL907XD-V1 + - rtase: Corrects error handling of the rtase_check_mac_version_valid() + - net/ipv6: delete temporary address if mngtmpaddr is removed or unmanaged + - net: mdio-ipq4019: add missing error check + - marvell: pxa168_eth: fix call balance of pep->clk handling routines + - net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken + - octeontx2-af: RPM: Fix mismatch in lmac type + - octeontx2-af: RPM: Fix low network performance + - octeontx2-af: RPM: fix stale RSFEC counters + - octeontx2-af: RPM: fix stale FCFEC counters + - octeontx2-af: Quiesce traffic before NIX block reset + - spi: atmel-quadspi: Fix register name in verbose logging function + - net: hsr: fix hsr_init_sk() vs network/transport headers. + - bnxt_en: Reserve rings after PCIe AER recovery if NIC interface is down + - bnxt_en: Set backplane link modes correctly for ethtool + - bnxt_en: Fix queue start to update vnic RSS table + - bnxt_en: Fix receive ring space parameters when XDP is active + - bnxt_en: Refactor bnxt_ptp_init() + - bnxt_en: Unregister PTP during PCI shutdown and suspend + - Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync + - Bluetooth: MGMT: Fix possible deadlocks + - llc: Improve setsockopt() handling of malformed user input + - rxrpc: Improve setsockopt() handling of malformed user input + - tcp: Fix use-after-free of nreq in reqsk_timer_handler(). + - ip6mr: fix tables suspicious RCU usage + - ipmr: fix tables suspicious RCU usage + - iio: light: al3010: Fix an error handling path in al3010_probe() + - usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read() + - usb: yurex: make waiting on yurex_write interruptible + - USB: chaoskey: fail open after removal + - USB: chaoskey: Fix possible deadlock chaoskey_list_lock + - misc: apds990x: Fix missing pm_runtime_disable() + - devres: Fix page faults when tracing devres from unloaded modules + - usb: gadget: uvc: wake pump everytime we update the free list + - interconnect: qcom: icc-rpmh: probe defer incase of missing QoS clock + dependency + - iio: backend: fix wrong pointer passed to IS_ERR() + - iio: adc: ad4000: fix reading unsigned data + - iio: adc: ad4000: Check for error code from devm_mutex_init() call + - iio: adc: pac1921: Check for error code from devm_mutex_init() call + - iio: accel: adxl380: fix raw sample read + - phy: realtek: usb: fix NULL deref in rtk_usb2phy_probe + - phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe + - counter: stm32-timer-cnt: Add check for clk_enable() + - counter: ti-ecap-capture: Add check for clk_enable() + - bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian + - usb: typec: fix potential array underflow in ucsi_ccg_sync_control() + - firmware_loader: Fix possible resource leak in fw_log_firmware_info() + - ALSA: hda/realtek: Update ALC256 depop procedure + - drm/radeon: Fix spurious unplug event on radeon HDMI + - drm/amd/display: Fix null check for pipe_ctx->plane_state in + dcn20_program_pipe + - drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp + - ASoC: imx-audmix: Add NULL check in imx_audmix_probe + - drm/xe/ufence: Wake up waiters after setting ufence->signalled + - apparmor: fix 'Do simple duplicate message elimination' + - ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() + - ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry + - ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe + - s390/pci: Fix potential double remove of hotplug slot + - f2fs: fix fiemap failure issue when page size is 16KB + - net_sched: sch_fq: don't follow the fast path if Tx is behind now + - xen: Fix the issue of resource not being properly released in + xenbus_dev_probe() + - ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox + devices + - ALSA: usb-audio: Fix out of bounds reads when finding clock sources + - usb: ehci-spear: fix call balance of sehci clk handling routines + - usb: typec: ucsi: glink: fix off-by-one in connector_status + - xfs: fix simplify extent lookup in xfs_can_free_eofblocks + - ext4: supress data-race warnings in ext4_free_inodes_{count,set}() + - ext4: fix FS_IOC_GETFSMAP handling + - MAINTAINERS: update location of media main tree + - docs: media: update location of the media patches + - jfs: xattr: check invalid xattr size more strictly + - ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 + 21MES00B00 + - ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata() + - ASoC: da7213: Populate max_register to regmap_config + - perf/x86/intel/pt: Fix buffer full but size is 0 case + - crypto: x86/aegis128 - access 32-bit arguments as 32-bit + - KVM: x86: switch hugepage recovery thread to vhost_task + - KVM: x86/mmu: Skip the "try unsync" path iff the old SPTE was a leaf SPTE + - KVM: x86: add back X86_LOCAL_APIC dependency + - KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD + - powerpc/pseries: Fix KVM guest detection for disabling hardlockup detector + - KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR + - KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status + - Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of + setup_vmcs_config()" + - KVM: arm64: Don't retire aborted MMIO instruction + - KVM: arm64: vgic-its: Clear ITE when DISCARD frees an ITE + - KVM: arm64: Get rid of userspace_irqchip_in_use + - KVM: arm64: vgic-its: Add a data length check in vgic_its_save_* + - KVM: arm64: vgic-its: Clear DTE when MAPD unmaps a device + - Compiler Attributes: disable __counted_by for clang < 19.1.3 + - PCI: Fix use-after-free of slot->bus on hot remove + - LoongArch: Explicitly specify code model in Makefile + - clk: clk-loongson2: Fix memory corruption bug in struct + loongson2_clk_provider + - clk: clk-loongson2: Fix potential buffer overflow in flexible-array member + access + - fsnotify: fix sending inotify event with unexpected filename + - fsnotify: Fix ordering of iput() and watched_objects decrement + - comedi: Flush partial mappings in error case + - apparmor: test: Fix memory leak for aa_unpack_strdup() + - iio: dac: adi-axi-dac: fix wrong register bitfield + - tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler + - locking/lockdep: Avoid creating new name string literals in + lockdep_set_subclass() + - tools/nolibc: s390: include std.h + - fcntl: make F_DUPFD_QUERY associative + - pinctrl: qcom: spmi: fix debugfs drive strength + - dt-bindings: pinctrl: samsung: Fix interrupt constraint for variants with + fallbacks + - dt-bindings: iio: dac: ad3552r: fix maximum spi speed + - exfat: fix uninit-value in __exfat_get_dentry_set + - exfat: fix out-of-bounds access of directory entries + - xhci: Fix control transfer error on Etron xHCI host + - xhci: Combine two if statements for Etron xHCI host + - xhci: Don't perform Soft Retry for Etron xHCI host + - xhci: Don't issue Reset Device command to Etron xHCI host + - Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}() + - usb: xhci: Limit Stop Endpoint retries + - usb: xhci: Fix TD invalidation under pending Set TR Dequeue + - usb: xhci: Avoid queuing redundant Stop Endpoint commands + - ARM: dts: omap36xx: declare 1GHz OPP as turbo again + - wifi: ath12k: fix warning when unbinding + - wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of + failures + - wifi: nl80211: fix bounds checker error in nl80211_parse_sched_scan + - wifi: ath12k: fix crash when unbinding + - wifi: brcmfmac: release 'root' node in all execution paths + - Revert "fs: don't block i_writecount during exec" + - Revert "f2fs: remove unreachable lazytime mount option parsing" + - Revert "usb: gadget: composite: fix OS descriptors w_value logic" + - serial: sh-sci: Clean sci_ports[0] after at earlycon exit + - Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" + - io_uring: fix corner case forgetting to vunmap + - io_uring: check for overflows in io_pin_pages + - blk-settings: round down io_opt to physical_block_size + - gpio: exar: set value when external pull-up or pull-down is present + - netfilter: ipset: add missing range check in bitmap_ip_uadt + - spi: Fix acpi deferred irq probe + - mtd: spi-nor: core: replace dummy buswidth from addr to data + - cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power() + - cifs: support mounting with alternate password to allow password rotation + - parisc/ftrace: Fix function graph tracing disablement + - RISC-V: Scalar unaligned access emulated on hotplug CPUs + - RISC-V: Check scalar unaligned access on all CPUs + - ksmbd: fix use-after-free in SMB request handling + - smb: client: fix NULL ptr deref in crypto_aead_setkey() + - platform/chrome: cros_ec_typec: fix missing fwnode reference decrement + - irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain + - x86/CPU/AMD: Terminate the erratum_1386_microcode array + - ubi: wl: Put source PEB into correct list if trying locking LEB failed + - um: ubd: Do not use drvdata in release + - um: net: Do not use drvdata in release + - dt-bindings: serial: rs485: Fix rs485-rts-delay property + - serial: 8250_fintek: Add support for F81216E + - serial: 8250: omap: Move pm_runtime_get_sync + - serial: amba-pl011: Fix RX stall when DMA is used + - serial: amba-pl011: fix build regression + - Revert "block, bfq: merge bfq_release_process_ref() into + bfq_put_cooperator()" + - mtd: ubi: fix unreleased fwnode_handle in find_volume_fwnode() + - block: Prevent potential deadlock in blk_revalidate_disk_zones() + - um: vector: Do not use drvdata in release + - sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK + - iio: gts: Fix uninitialized symbol 'ret' + - ublk: fix ublk_ch_mmap() for 64K page size + - arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled + - block: fix missing dispatching request when queue is started or unquiesced + - block: fix ordering between checking QUEUE_FLAG_QUIESCED request adding + - block: fix ordering between checking BLK_MQ_S_STOPPED request adding + - blk-mq: Make blk_mq_quiesce_tagset() hold the tag list mutex less long + - gve: Flow steering trigger reset only for timeout error + - HID: wacom: Interpret tilt data from Intuos Pro BT as signed values + - i40e: Fix handling changed priv flags + - media: wl128x: Fix atomicity violation in fmc_send_cmd() + - media: intel/ipu6: do not handle interrupts when device is disabled + - arm64: dts: mediatek: mt8186-corsola-voltorb: Merge speaker codec nodes + - netdev-genl: Hold rcu_read_lock in napi_get + - soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure + - soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting() + - media: v4l2-core: v4l2-dv-timings: check cvt/gtf result + - x86/mm: Carve out INVLPG inline asm for use by others + - x86/microcode/AMD: Flush patch buffer mapping after application + - ALSA: rawmidi: Fix kvfree() call in spinlock + - ALSA: ump: Fix evaluation of MIDI 1.0 FB info + - ALSA: pcm: Add sanity NULL check for the default mmap fault handler + - ALSA: hda/realtek: Update ALC225 depop procedure + - ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform + - ALSA: hda/realtek: Set PCBeep to default value for ALC274 + - ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max + - ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i + - ALSA: hda/realtek: Apply quirk for Medion E15433 + - fs/smb/client: implement chmod() for SMB3 POSIX Extensions + - smb: client: fix use-after-free of signing key + - smb3: request handle caching when caching directories + - smb: client: handle max length for SMB symlinks + - smb: Don't leak cfid when reconnect races with open_cached_dir + - smb: prevent use-after-free due to open_cached_dir error paths + - smb: During unmount, ensure all cached dir instances drop their dentry + - usb: misc: ljca: set small runtime autosuspend delay + - usb: misc: ljca: move usb_autopm_put_interface() after wait for response + - usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED + - usb: musb: Fix hardware lockup on first Rx endpoint request + - usb: dwc3: gadget: Add missing check for single port RAM in TxFIFO resizing + logic + - usb: dwc3: gadget: Fix checking for number of TRBs left + - usb: dwc3: gadget: Fix looping of queued SG entries + - staging: vchiq_arm: Fix missing refcount decrement in error path for fw_node + - counter: stm32-timer-cnt: fix device_node handling in probe_encoder() + - ublk: fix error code for unsupported command + - lib: string_helpers: silence snprintf() output truncation warning + - f2fs: fix to do sanity check on node blkaddr in truncate_node() + - ipc: fix memleak if msg_init_ns failed in create_ipc_ns + - Input: cs40l50 - fix wrong usage of INIT_WORK() + - NFSD: Prevent a potential integer overflow + - SUNRPC: make sure cache entry active before cache_show + - um: Fix potential integer overflow during physmem setup + - um: Fix the return value of elf_core_copy_task_fpregs + - kfifo: don't include dma-mapping.h in kfifo.h + - um: ubd: Initialize ubd's disk pointer in ubd_add + - um: Always dump trace for specified task in show_stack + - NFSv4.0: Fix a use-after-free problem in the asynchronous open() + - nfs/localio: must clear res.replen in nfs_local_read_done + - rtc: st-lpc: Use IRQF_NO_AUTOEN flag in request_irq() + - rtc: abx80x: Fix WDT bit position of the status register + - rtc: check if __rtc_read_time was successful in rtc_timer_do_work() + - ubi: fastmap: wl: Schedule fm_work if wear-leveling pool is empty + - ubifs: Correct the total block count by deducting journal reservation + - ubi: fastmap: Fix duplicate slab cache names while attaching + - ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit + - jffs2: fix use of uninitialized variable + - hostfs: Fix the NULL vs IS_ERR() bug for __filemap_get_folio() + - net/9p/usbg: fix handling of the failed kzalloc() memory allocation + - rtc: rzn1: fix BCD to rtc_time conversion errors + - Revert "nfs: don't reuse partially completed requests in + nfs_lock_and_join_requests" + - nvme/multipath: Fix RCU list traversal to use SRCU primitive + - blk-mq: add non_owner variant of start_freeze/unfreeze queue APIs + - block: model freeze & enter queue as lock for supporting lockdep + - block: fix uaf for flush rq while iterating tags + - block: return unsigned int from bdev_io_min + - nvme-fabrics: fix kernel crash while shutting down controller + - 9p/xen: fix init sequence + - 9p/xen: fix release of IRQ + - perf/arm-smmuv3: Fix lockdep assert in ->event_init() + - perf/arm-cmn: Ensure port and device id bits are set properly + - smb: client: disable directory caching when dir_cache_timeout is zero + - x86/Documentation: Update algo in init_size description of boot protocol + - cifs: Fix parsing native symlinks relative to the export + - cifs: Fix parsing reparse point with native symlink in SMB1 non-UNICODE + session + - rtc: ab-eoz9: don't fail temperature reads on undervoltage notification + - Rename .data.unlikely to .data..unlikely + - Rename .data.once to .data..once to fix resetting WARN*_ONCE + - kbuild: deb-pkg: Don't fail if modules.order is missing + - smb: Initialize cfid->tcon before performing network ops + - block: Don't allow an atomic write be truncated in blkdev_write_iter() + - modpost: remove incorrect code in do_eisa_entry() + - cifs: during remount, make sure passwords are in sync + - cifs: unlock on error in smb3_reconfigure() + - nfs: ignore SB_RDONLY when mounting nfs + - sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport + - SUNRPC: timeout and cancel TLS handshake with -ETIMEDOUT + - sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket + - nfs/blocklayout: Don't attempt unregister for invalid block device + - nfs/blocklayout: Limit repeat device registration on failure + - block, bfq: fix bfqq uaf in bfq_limit_depth() + - brd: decrease the number of allocated pages which discarded + - sh: intc: Fix use-after-free bug in register_intc_controller() + - tools/power turbostat: Fix trailing '\n' parsing + - tools/power turbostat: Fix child's argument forwarding + - block: always verify unfreeze lock on the owner task + - block: don't verify IO lock for freeze/unfreeze in elevator_init_mq() + - Linux 6.12.2 + + * Plucky update: v6.12.1 upstream stable release (LP: #2091624) + - hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer + - media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in + uvc_parse_format + - mm/mmap: fix __mmap_region() error handling in rare merge failure case + - Linux 6.12.1 + + * Fix compile warnings (LP: #2089676) + - SAUCE: Revert "UBUNTU: SAUCE: (no-up) Allow filtering of cpufreq drivers" + - SAUCE: r8169: Fix compile warning + + * Intel Be201 Bluetooth hardware error 0x0f on Arrow Lake (LP: #2088151) + - Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaP + + * python perf module missing in realtime kernel (LP: #2089411) + - [Packaging] linux-tools: Link directories rather than individual files + - [Packaging] linux-tools: Fix python perf library packaging + + * Miscellaneous Ubuntu changes + - [Packaging] Fix source file collection + - [Packaging] Build all packages for linux-unstable + - [Packaging] linux-lib-rust: Fix incorrect package name + - [Packaging] linux-tools: Put libperf-jvmti.so into lib/ + - [Packaging] linux-bpf-dev: Restructure packaging + - [Packaging] linux-bpf-dev: Skip packaging for additional kernel flavors + - [Config] updateconfigs following v6.12.2 stable import + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] linux-bpf-dev: Skip packaging for additional + kernel flavors" + - Revert "UBUNTU: [Packaging] linux-bpf-dev: Restructure packaging" + + -- Paolo Pisati Thu, 12 Dec 2024 17:17:27 +0100 + +linux-unstable (6.12.0-4.4) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-4.4 -proposed tracker (LP: #2089753) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.11.12) + + * Random flickering with Intel i915 (Comet Lake and Kaby Lake) on Linux 6.8+ + (LP: #2086587) + - SAUCE: iommu/intel: disable DMAR for KBL and CML integrated gfx + + * Miscellaneous Ubuntu changes + - [Packaging] avoid arch-specific certificate creation + + * Miscellaneous upstream changes + - Revert "lsm: remove LSM_COUNT and LSM_CONFIG_COUNT" + - Revert "lsm: replace indirect LSM hook calls with static calls" + - Revert "init/main.c: Initialize early LSMs after arch code, static keys and + calls." + + -- Paolo Pisati Wed, 27 Nov 2024 11:50:01 +0100 + +linux-unstable (6.12.0-3.3) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-3.3 -proposed tracker (LP: #2088427) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.12 rebase + + -- Paolo Pisati Mon, 18 Nov 2024 09:57:30 +0100 + +linux-unstable (6.12.0-2.2) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-2.2 -proposed tracker (LP: #2088046) + + * Miscellaneous Ubuntu changes + - debian.master/dkms-versions: temporarily remove dkmses + + -- Paolo Pisati Wed, 13 Nov 2024 10:59:36 +0100 + +linux-unstable (6.12.0-1.1) plucky; urgency=medium + + * plucky/linux-unstable: 6.12.0-1.1 -proposed tracker (LP: #2087956) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.11.12) + + * OVTI08F4:00: number of CSI2 data lanes 2 is not supported (LP: #2084059) + - SAUCE: media: ipu-bridge: Add support for additional link frequencies + + * [Oracular] Allow overriding Rust tools (LP: #2084693) + - [Packaging] Allow rust overrides + + * Support ov05c10 camera sensor in Intel ipu-bridge (LP: #2081866) + - SAUCE: media: Support ov05c10 camera sensor + + * Lack of UART boot output on rb3gen2 even with earlycon (LP: #2083559) + - [Config] move qcom clk and serial options as builtin + + * Missing Bluetooth device IDs for new Mediatek MT7920/MT7925 (LP: #2078878) + - SAUCE: Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925 + + * Support Qualcomm WCN7851 Dual Bluetooth Adapter 0489:E0F3 (LP: #2081796) + - SAUCE: Bluetooth: btusb: Add one more ID 0x0489:0xe0f3 for Qualcomm WCN785x + + * re-enable Ubuntu FAN in the Noble kernel (LP: #2064508) + - SAUCE: fan: add VXLAN implementation + - SAUCE: fan: Fix NULL pointer dereference + - SAUCE: fan: support vxlan strict length validation + + * update for V3 kernel bits and improved multiple fan slice support + (LP: #1470091) // re-enable Ubuntu FAN in the Noble kernel (LP: #2064508) + - SAUCE: fan: tunnel multiple mapping mode (v3) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.12 and rename to linux-unstable + - [Config] Update annotations after rebase to v6.12-rc4 + - [Packaging] use DEB_ prefix for some variables + - debian.master/dkms-versions: temporarily remove most dkms packages + - [Packaging] Sort build dependencies alphabetically + - [Packaging] Add list of used source files to buildinfo package + - [Packaging] replace $(DROOT) with debian + - [Config] updateconfigs following v6.12-rc7 rebase + - [packaging] garbage collect some invalid/unnecessary flags + + -- Paolo Pisati Tue, 12 Nov 2024 14:56:47 +0100 + +linux-unstable (6.12.0-0.0) plucky; urgency=medium + + * Dummy entry. + + -- Timo Aaltonen Thu, 03 Oct 2024 15:00:32 +0300 + +linux (6.11.0-8.8) oracular; urgency=medium + + * oracular/linux: 6.11.0-8.8 -proposed tracker (LP: #2080825) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.08.12) + + * [SRU] Disable CONFIG_TCG_TPM2_HMAC to avoid performance loss after v6.10 + (LP: #2080322) + - [Config] disable CONFIG_TCG_TPM2_HMAC by default + + * Integrated Sensor Hub (ISH) support for Intel Lunar Lake platform + (LP: #2071698) + - Documentation: hid: intel-ish-hid: Add vendor custom firmware loading + - HID: intel-ish-hid: Use CPU generation string in driver_data + - hid: intel-ish-hid: Add support for vendor customized firmware loading + + * Miscellaneous Ubuntu changes + - [Packaging] Purge obsolete upstart files + - [Packaging] tools/hv: don't build/install hv_fcopy_uio_daemon on arm64 + - [Config] Update toolchain versions + - SAUCE: rust: Fix rustc source path for the new rustc packaging + - [Packaging] Don't force bindgen version + - [Config] Re-enable rust support for amd64 + + -- Timo Aaltonen Mon, 16 Sep 2024 15:04:18 +0300 + +linux (6.11.0-7.7) oracular; urgency=medium + + * oracular/linux: 6.11.0-7.7 -proposed tracker (LP: #2079949) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [1/99]: LSM: Infrastructure management of the sock + security + - SAUCE: apparmor4.0.0 [2/99]: LSM: Add the lsmblob data structure. + - SAUCE: apparmor4.0.0 [3/99]: LSM: Use lsmblob in security_audit_rule_match + - SAUCE: apparmor4.0.0 [4/99]: LSM: Call only one hook for audit rules + - SAUCE: apparmor4.0.0 [5/99]: LSM: Add lsmblob_to_secctx hook + - SAUCE: apparmor4.0.0 [6/99]: Audit: maintain an lsmblob in audit_context + - SAUCE: apparmor4.0.0 [7/99]: LSM: Use lsmblob in security_ipc_getsecid + - SAUCE: apparmor4.0.0 [8/99]: Audit: Update shutdown LSM data + - SAUCE: apparmor4.0.0 [9/99]: LSM: Use lsmblob in security_current_getsecid + - SAUCE: apparmor4.0.0 [10/99]: LSM: Use lsmblob in security_inode_getsecid + - SAUCE: apparmor4.0.0 [11/99]: Audit: use an lsmblob in audit_names + - SAUCE: apparmor4.0.0 [12/99]: LSM: Create new security_cred_getlsmblob LSM + hook + - SAUCE: apparmor4.0.0 [13/99]: Audit: Change context data from secid to + lsmblob + - SAUCE: apparmor4.0.0 [14/99]: Netlabel: Use lsmblob for audit data + - SAUCE: apparmor4.0.0 [15/99]: LSM: Ensure the correct LSM context releaser + - SAUCE: apparmor4.0.0 [16/99]: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [17/99]: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [18/99]: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [19/99]: LSM: lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [20/99]: LSM: security_lsmblob_to_secctx module + selection + - SAUCE: apparmor4.0.0 [21/99]: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [22/99]: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [23/99]: Audit: Add record for multiple task security + contexts + - SAUCE: apparmor4.0.0 [24/99]: audit: multiple subject lsm values for + netlabel + - SAUCE: apparmor4.0.0 [25/99]: Audit: Add record for multiple object contexts + - SAUCE: apparmor4.0.0 [26/99]: LSM: Remove unused lsmcontext_init() + - SAUCE: apparmor4.0.0 [27/99]: LSM: Improve logic in security_getprocattr + - SAUCE: apparmor4.0.0 [28/99]: LSM: secctx provider check on release + - SAUCE: apparmor4.0.0 [29/99]: LSM: Single calls in socket_getpeersec hooks + - SAUCE: apparmor4.0.0 [30/99]: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [31/99]: LSM: Identify which LSM handles the context + string + - SAUCE: apparmor4.0.0 [32/99]: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [33/99]: LSM: Add mount opts blob size tracking + - SAUCE: apparmor4.0.0 [34/99]: LSM: allocate mnt_opts blobs instead of module + specific data + - SAUCE: apparmor4.0.0 [35/99]: LSM: Infrastructure management of the key + security blob + - SAUCE: apparmor4.0.0 [36/99]: LSM: Infrastructure management of the mnt_opts + security blob + - SAUCE: apparmor4.0.0 [37/99]: LSM: Remove lsmblob scaffolding + - SAUCE: apparmor4.0.0 [38/99]: LSM: Allow reservation of netlabel + - SAUCE: apparmor4.0.0 [39/99]: LSM: restrict security_cred_getsecid() to a + single LSM + - SAUCE: apparmor4.0.0 [40/99]: Smack: Remove LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [41/99]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [41/99]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [42/99]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [43/99]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [44/99]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [45/99]: af_unix mediation + - SAUCE: apparmor4.0.0 [46/99]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [47/99] fixup inode_set_attr + - SAUCE: apparmor4.0.0 [48/99]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [49/99]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [50/99]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [51/99]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [52/99]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [53/99]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [54/99]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [55/99]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [56/99]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [57/99]: prompt - fix caching + - SAUCE: apparmor4.0.0 [58/99]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [59/99]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [60/99]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [61/99]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [62/99]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [63/99]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [64/93] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [65/99]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [66/99]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [67/99]: userns - make it so special unconfined + profiles can mediate user namespaces + - SAUCE: apparmor4.0.0 [68/99]: add io_uring mediation + - SAUCE: apparmor4.0.0 [69/99]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [70/99]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [71/99]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [72/99]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [73/99]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [74/99]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [75/99]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [76/99]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [77/99]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [78/99]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [79/99]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [80/99]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [81/99]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [82/99]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [83/99]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [84/99]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [85/99]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [86/99]: fixup notify + - SAUCE: apparmor4.0.0 [87/99]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [88/99]: apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [89/99]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0 [90/99]: fix reserved mem for when we save ipv6 + addresses + - SAUCE: apparmor4.0.0 [91/99]: fix address mapping for recvfrom + - SAUCE: apparmor4.0.0 [92/99]: apparmor: add support for 2^24 states to the + dfa state machine. + - SAUCE: apparmor4.0.0 [93/99]: apparmor: advertise to userspace support of + user upcall for file rules. + - SAUCE: apparmor4.0.0 [94/99]: apparmor: allocate xmatch for nullpdf inside + aa_alloc_null + - SAUCE: apparmor4.0.0 [95/99]: apparmor: properly handle cx/px lookup failure + for complain + - SAUCE: apparmor4.0.0 [96/99]: apparmor: fix prompt failing during large down + loads + - SAUCE: apparmor4.0.0 [97/99]: apparmor: fix allow field in notification + - SAUCE: apparmor4.0.0 [98/99]: fix build error with !CONFIG_SECURITY + - SAUCE: apparmor4.0.0 [99/99]: fix build error with in nfs4xdr + + * Intel Lunar Lake / Battlemage enablement (LP: #2076209) + - drm/xe/lnl: Drop force_probe requirement + - drm/xe: Support 'nomodeset' kernel command-line option + - drm/i915/display: Plane capability for 64k phys alignment + - drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed. + - drm/xe: Use separate rpm lockdep map for non-d3cold-capable devices + - drm/xe: Fix NPD in ggtt_node_remove() + - drm/xe/bmg: Drop force_probe requirement + - drm/xe/gsc: Fix FW status if the firmware is already loaded + - drm/xe/gsc: Track the platform in the compatibility version + - drm/xe/gsc: Wedge the device if the GSCCS reset fails + - drm/i915/bios: Update new entries in VBT BDB block definitions + - drm/xe/hwmon: Treat hwmon as a per-device concept + - drm/xe: s/xe_tile_migrate_engine/xe_tile_migrate_exec_queue + - drm/xe: Add xe_vm_pgtable_update_op to xe_vma_ops + - drm/xe: Add xe_exec_queue_last_fence_test_dep + - drm/xe: Add timeout to preempt fences + - drm/xe: Convert multiple bind ops into single job + - drm/xe: Update VM trace events + - drm/xe: Update PT layer with better error handling + - drm/xe: Add VM bind IOCTL error injection + - dma-buf: Split out dma fence array create into alloc and arm functions + - drm/xe: Invalidate media_gt TLBs in PT code + - drm/i915/display: Fix BMG CCS modifiers + - drm/xe: Use xe_pm_runtime_get in xe_bo_move() if reclaim-safe. + - drm/xe: Remove extra dma_fence_put on xe_sync_entry_add_deps failure + + * [24.10 FEAT] [KRN1911] Vertical CPU Polarization Support Stage 2 + (LP: #2072760) + - s390/wti: Introduce infrastructure for warning track interrupt + - s390/wti: Prepare graceful CPU pre-emption on wti reception + - s390/wti: Add wti accounting for missed grace periods + - s390/wti: Add debugfs file to display missed grace periods per cpu + - s390/topology: Add sysctl handler for polarization + - s390/topology: Add config option to switch to vertical during boot + - s390/smp: Add cpu capacities + - s390/hiperdispatch: Introduce hiperdispatch + - s390/hiperdispatch: Add steal time averaging + - s390/hiperdispatch: Add trace events + - s390/hiperdispatch: Add hiperdispatch sysctl interface + - s390/hiperdispatch: Add hiperdispatch debug attributes + - s390/hiperdispatch: Add hiperdispatch debug counters + - [Config] Initial set of new options HIPERDISPATCH_ON and + SCHED_TOPOLOGY_VERTICAL to yes for s390x + + * Remove non-LPAE kernel flavor (LP: #2025265) + - [Packaging] Drop control.d/vars.generic-lpae + + * generate and ship vmlinux.h to allow packages to build BPF CO-RE + (LP: #2050083) + - [Packaging] Don't call dh_all on linux-bpf-dev unless on master kernel + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.11-rc7 rebase + + -- Timo Aaltonen Mon, 09 Sep 2024 13:38:09 +0300 + +linux (6.11.0-6.6) oracular; urgency=medium + + * oracular/linux: 6.11.0-6.6 -proposed tracker (LP: #2077949) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.08.12) + - [Packaging] update Ubuntu.md + + * Pull in latest X13s commits (LP: #2078929) + - arm64: dts: qcom: sc8280xp-x13s: disable PCIe perst pull downs + - arm64: dts: qcom: sc8280xp-x13s: clean up PCIe2a pinctrl node + - media: qcom: camss: Remove use_count guard in stop_streaming + - media: qcom: camss: Fix ordering of pm_runtime_enable + - arm64: dts: qcom: sc8280xp-x13s: Enable RGB sensor + - wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power() + - Revert "wifi: ath11k: restore country code during resume" + - Revert "wifi: ath11k: support hibernation" + - SAUCE: media: ov5675: Fix power on/off delay timings + - SAUCE: media: dt-bindings: Document SC8280XP/SM8350 Venus + - SAUCE: media: venus: core: Remove trailing commas from of match entries + - SAUCE: media: venus: hfi_venus: Support only updating certain bits with + presets + - SAUCE: media: platform: venus: Add optional LLCC path + - SAUCE: media: venus: core: Add SM8350 resource struct + - SAUCE: media: venus: core: Add SC8280XP resource struct + - SAUCE: arm64: dts: qcom: sc8280xp: Add Venus + - SAUCE: arm64: dts: qcom: sc8280xp-x13s: Enable Venus + - SAUCE: phy: qcom-qmp-combo: drop regulator loads + - SAUCE: phy: qcom-edp: drop regulator loads + - SAUCE: i2c: qcom-cci: Stop complaining about DT set clock rate + - SAUCE: clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs + + * Intel Lunar Lake / Battlemage enablement (LP: #2076209) + - drm/i915: Skip programming FIA link enable bits for MTL+ + - drm/i915: disable fbc due to Wa_16023588340 + - drm/xe/xe2lpm: Extend Wa_16021639441 + - drm/i915/display: Cache adpative sync caps to use it later + - drm/xe: Generate oob before compiling anything + - drm/i915/display: WA for Re-initialize dispcnlunitt1 xosc clock + - drm/xe/gsc: add Battlemage support + - drm/xe/migrate: Handle clear ccs logic for xe2 dgfx + - drm/xe/migrate: Add helper function to program identity map + - drm/xe/xe2: Introduce identity map for compressed pat for vram + - drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx + - drm/xe/fbdev: Limit the usage of stolen for LNL+ + - drm/xe/uapi: Expose SIMD16 EU mask in topology query + - drm/xe: Fix warning on unreachable statement + - drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability + - drm/i915/hdcp: Add encoder check in hdcp2_get_capability + - drm/xe/hdcp: Check GSC structure validity + - drm/i915/dp: Clear VSC SDP during post ddi disable routine + - drm/xe/huc: Define HuC binary for LNL + - drm/xe/gsc: Define GSC binary for LNL + - drm/xe/huc: Define HuC binary for BMG + - drm/xe/xe2hpg: Introduce performance tuning changes for Xe2_HPG + - drm/i915/display/dp: Compute AS SDP when vrr is also enabled + - drm/xe: Move and export xe_hw_engine lookup. + - drm/xe/xe2: Enable Priority Mem Read + - drm/xe/xe2: Introduce performance changes + - drm/xe/xe2: Add performance turning changes + - drm/xe/guc: Bump minimum required GuC version to v70.29.2 + - drm/xe/guc: Define GuC version v70.29.2 for BMG + - drm/xe/guc: Enable w/a 14022293748 and 22019794406 + - drm/xe: Move enable host l2 VRAM post MCR init + - drm/xe: Write all slices if its mcr register + - drm/xe: Define STATELESS_COMPRESSION_CTRL as mcr register + - drm/i915/pps: Disable DPLS_GATING around pps sequence + - drm/xe: fix engine_class bounds check again + - drm/xe/uc: Use managed bo for HuC and GSC objects + - drm/xe: Use reserved copy engine for user binds on faulting devices + - drm/xe/display: Match i915 driver suspend/resume sequences better + - drm/i915: move rawclk from runtime to display runtime info + - drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO() + - drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled + - drm/i915/display: Don't enable decompression on Xe2 with Tile4 + - drm/fourcc: define Intel Xe2 related tile4 ccs modifiers + - drm/i915/display: allow creation of Xe2 ccs framebuffers + - drm/xe/display: fix compat IS_DISPLAY_STEP() range end + - drm/xe/display: remove intel_display_step_name() to simplify + - drm/xe/display: remove the unused compat HAS_GMD_ID() + - drm/xe/step: define more steppings E-J + - drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL() + - drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP() + - drm/i915/display: identify display steppings in display probe + - drm/i915/display: switch to display detected steppings + - drm/i915: remove display stepping handling + - drm/xe: remove display stepping handling + - drm/xe: Removed unused xe_ggtt_printk + - drm/xe: Introduce GGTT documentation + - drm/xe: Remove unnecessary drm_mm.h includes + - drm/{i915, xe}: Avoid direct inspection of dpt_vma from outside dpt + - drm/xe: Encapsulate drm_mm_node inside xe_ggtt_node + - drm/xe: Rename xe_ggtt_node related functions + - drm/xe: Limit drm_mm_node_allocated access to xe_ggtt_node + - drm/xe: Introduce xe_ggtt_largest_hole + - drm/xe: Introduce xe_ggtt_print_holes + - drm/xe: Refactor xe_ggtt balloon functions to make the node clear + - drm/xe: Make xe_ggtt_node struct independent + - drm/xe: Fix missing runtime outer protection for ggtt_remove_node + - drm/xe: Move ggtt_fini to devm managed + - drm/xe: Set firmware state to loadable before registering guc_fini_hw + - drm/xe: Drop warn on xe_guc_pc_gucrc_disable in guc pc fini + - drm/xe: Move hw_engine_fini to devm managed + - drm/xe: Update xe_sa to use xe_managed_bo_create_pin_map + - drm/xe: Suspend/resume user access only during system s/r + - drm/xe: Handle polling only for system s/r in xe_display_pm_suspend/resume() + - drm/xe/display: handle HPD polling in display runtime suspend/resume + - drm/xe: Fix total initialization in xe_ggtt_print_holes() + + * Missing device ID for amd_atl for AMD platforms Kraken and Strix-Halo + (LP: #2077922) + - x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h + - x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h-70h + + * generate and ship vmlinux.h to allow packages to build BPF CO-RE + (LP: #2050083) + - [Packaging] add linux-bpf-dev package + - [Packaging] do not attempt to generate BTF header on armhf + + * Fix ethernet performance on JSL and EHL (LP: #2077858) + - intel_idle: Disable promotion to C1E on Jasper Lake and Elkhart Lake + + * Regression: unable to reach low idle states on Tiger Lake (LP: #2072679) + - SAUCE: PCI: ASPM: Allow OS to configure ASPM where BIOS is incapable of + - SAUCE: PCI: vmd: Let OS control ASPM for devices under VMD domain + + * Random flickering with Intel i915 (Gen9 GPUs in 6th-8th gen CPUs) on Linux + 6.8 (LP: #2062951) + - SAUCE: iommu/intel: disable DMAR for SKL integrated gfx + + * Make linux-tools-common Provide linux-cpupower (LP: #1960841) + - [Packaging] Add linux-cpupower to linux-tools-common Provides + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0: fix build error with !CONFIG_SECURITY + - [Config] updateconfigs following v6.11-rc6 rebase + - SAUCE: apparmor4.0.0: fix build after rebase to v6.11-rc6 + - [Packaging] perf: reenable libtraceevent + + -- Timo Aaltonen Wed, 04 Sep 2024 17:12:57 +0300 + +linux (6.11.0-5.5) oracular; urgency=medium + + * oracular/linux: 6.11.0-5.5 -proposed tracker (LP: #2077454) + + * GDS force mitigation re-enabled in 6.10 (and 6.11) causing crashes + (LP: #2077145) + - [Config] Force disable CONFIG_MITIGATION_GDS_FORCE again + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.11-rc5 rebase + + -- Timo Aaltonen Mon, 26 Aug 2024 17:11:19 +0300 + +linux (6.11.0-4.4) oracular; urgency=medium + + * oracular/linux: 6.11.0-4.4 -proposed tracker (LP: #2077394) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Config] Disable CONFIG_DRM_I915_REPLAY_GPU_HANGS_API + - [Packaging] carry ELF_PACKAGE_METADATA into relinking + - [Packaging] Rename to linux + + -- Timo Aaltonen Tue, 20 Aug 2024 12:07:08 +0300 + +linux (6.11.0-3.3) oracular; urgency=medium + + * dummy entry + + -- Timo Aaltonen Tue, 20 Aug 2024 10:30:29 +0300 + +linux-unstable (6.11.0-3.3) oracular; urgency=medium + + * oracular/linux-unstable: 6.11.0-3.3 -proposed tracker (LP: #2077292) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.08.12) + + * Disable PCI_DYNAMIC_OF_NODES in Ubuntu (LP: #2074376) + - [Config] Disable PCI_DYNAMIC_OF_NODES + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.11-rc3 rebase + + -- Timo Aaltonen Mon, 19 Aug 2024 11:49:32 +0300 + +linux-unstable (6.11.0-2.2) oracular; urgency=medium + + * oracular/linux-unstable: 6.11.0-2.2 -proposed tracker (LP: #2076564) + + * please help enable more EROFS compression algorithms (LP: #2074049) + - [Config] enable LZMA and ZSTD file compressions in EROFS + + * Enable CONFIG_EXFAT_FS in s390x too (LP: #2076428) + - [Config] Enable EXFAT_FS on s390x too + + * Miscellaneous Ubuntu changes + - [Packaging] Disable tools/perf on armhf (FTBFS) + - [Config] toolchain version update + + * Miscellaneous Ubuntu changes + - UBUNTU: Rebase on v6.11-rc3 + + -- Timo Aaltonen Mon, 12 Aug 2024 14:07:05 +0300 + +linux-unstable (6.11.0-1.1) oracular; urgency=medium + + * oracular/linux-unstable: 6.11.0-1.1 -proposed tracker (LP: #2076116) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.11 and rename to linux-unstable + - [Config] updateconfigs following v6.11-rc2 rebase + - SAUCE: hwmon: Fix aaeon driver for 6.11. + - debian.master/dkms-versions: temporarily remove all dkms + + -- Timo Aaltonen Mon, 05 Aug 2024 20:10:11 +0300 + +linux-unstable (6.11.0-0.0) oracular; urgency=medium + + * Dummy entry. + + -- Timo Aaltonen Wed, 31 Jul 2024 16:41:50 +0300 + +linux (6.10.0-18.18) oracular; urgency=medium + + * oracular/linux: 6.10.0-18.18 -proposed tracker (LP: #2073754) + + * net:fib_rule_tests.sh in ubuntu_kselftests_net fails on Noble (LP: #2066332) + - Revert "UBUNTU: SAUCE: selftests: net: fix "from" match test in + fib_rule_tests.sh" + + * Pull-request to address TPM bypass issue (LP: #2037688) + - [Config]: Configure TPM drivers as builtins for arm64 in annotations + + * kdump doesn't work with UEFI secure boot and kernel lockdown enabled on + ARM64 (LP: #2033007) + - [Config]: Enable CONFIG_KEXEC_IMAGE_VERIFY_SIG on arm64 + + * Miscellaneous Ubuntu changes + - SAUCE: s390/setup: Fix __pa/__va for modules under non-GPL licenses + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] debian.master/dkms-versions -- disable zfs for + s390x" + + -- Paolo Pisati Mon, 22 Jul 2024 13:43:47 +0200 + +linux (6.10.0-17.17) oracular; urgency=medium + + * oracular/linux: 6.10.0-17.17 -proposed tracker (LP: #2073091) + + * Miscellaneous Ubuntu changes + - rebase on v6.10 + + -- Paolo Pisati Mon, 15 Jul 2024 10:29:49 +0200 + +linux (6.10.0-16.16) oracular; urgency=medium + + * oracular/linux: 6.10.0-16.16 -proposed tracker (LP: #2072507) + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc7 + + -- Paolo Pisati Mon, 08 Jul 2024 17:52:01 +0200 + +linux (6.10.0-15.15) oracular; urgency=medium + + * oracular/linux: 6.10.0-15.15 -proposed tracker (LP: #2071915) + + * [UBUNTU 24.04] IOMMU DMA mode changed in kernel config causes massive + throughput degradation for PCI-related network workloads (LP: #2071471) + - [Config] Set IOMMU_DEFAULT_DMA_STRICT=n and IOMMU_DEFAULT_DMA_LAZY=yes for + s390x + + * Miscellaneous Ubuntu changes + - rename to linux + + -- Paolo Pisati Thu, 04 Jul 2024 12:12:06 +0200 + +linux-unstable (6.10.0-14.14) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-14.14 -proposed tracker (LP: #2071786) + + * zfs-dkms FTBFS on Linux 6.10/s390x (LP: #2071774) + - [Packaging] debian.master/dkms-versions -- disable zfs for s390x + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.06.11) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [42/92]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [42/92]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [43/92]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [44/92]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [45/92]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [46/92]: af_unix mediation + - SAUCE: apparmor4.0.0 [47/92]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/92]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/92]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/92]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/92]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/92]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/92]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/92]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/92]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/92]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/92]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/92]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/92]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/92]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/92]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/92]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/92]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/93] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/92]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/92]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/92]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/92]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/92]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/92]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/92]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/92]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/92]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/92]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/92]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/92]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/92]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/92]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/92]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/92]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/92]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/92]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/92]: fixup notify + - SAUCE: apparmor4.0.0 [88/92]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [89/92]: apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [90/92]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0 [91/92]: fix reserved mem for when we save ipv6 + addresses + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * linux-gcp 6.8.0-1005.5 (+ others) Noble kernel regression with new apparmor + profiles/features (LP: #2061851) + - SAUCE: apparmor4.0.0 [92/92]: fix address mapping for recvfrom + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/92]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/92]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/92]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0 [1/92]: LSM: Infrastructure management of the sock + security + - SAUCE: apparmor4.0.0 [2/92]: LSM: Add the lsmblob data structure. + - SAUCE: apparmor4.0.0 [3/92]: LSM: Use lsmblob in security_audit_rule_match + - SAUCE: apparmor4.0.0 [4/92]: LSM: Call only one hook for audit rules + - SAUCE: apparmor4.0.0 [5/92]: LSM: Add lsmblob_to_secctx hook + - SAUCE: apparmor4.0.0 [6/92]: Audit: maintain an lsmblob in audit_context + - SAUCE: apparmor4.0.0 [7/92]: LSM: Use lsmblob in security_ipc_getsecid + - SAUCE: apparmor4.0.0 [8/92]: Audit: Update shutdown LSM data + - SAUCE: apparmor4.0.0 [9/92]: LSM: Use lsmblob in security_current_getsecid + - SAUCE: apparmor4.0.0 [10/92]: LSM: Use lsmblob in security_inode_getsecid + - SAUCE: apparmor4.0.0 [11/92]: Audit: use an lsmblob in audit_names + - SAUCE: apparmor4.0.0 [12/92]: LSM: Create new security_cred_getlsmblob LSM + hook + - SAUCE: apparmor4.0.0 [13/92]: Audit: Change context data from secid to + lsmblob + - SAUCE: apparmor4.0.0 [14/92]: Netlabel: Use lsmblob for audit data + - SAUCE: apparmor4.0.0 [15/92]: LSM: Ensure the correct LSM context releaser + - SAUCE: apparmor4.0.0 [16/92]: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [17/92]: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [18/92]: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [19/92]: LSM: lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [20/92]: LSM: security_lsmblob_to_secctx module + selection + - SAUCE: apparmor4.0.0 [21/92]: Audit: Create audit_stamp structure + - SAUCE: apparmor4.0.0 [22/92]: Audit: Allow multiple records in an + audit_buffer + - SAUCE: apparmor4.0.0 [23/92]: Audit: Add record for multiple task security + contexts + - SAUCE: apparmor4.0.0 [24/92]: audit: multiple subject lsm values for + netlabel + - SAUCE: apparmor4.0.0 [25/92]: Audit: Add record for multiple object contexts + - SAUCE: apparmor4.0.0 [26/92]: LSM: Remove unused lsmcontext_init() + - SAUCE: apparmor4.0.0 [27/92]: LSM: Improve logic in security_getprocattr + - SAUCE: apparmor4.0.0 [28/92]: LSM: secctx provider check on release + - SAUCE: apparmor4.0.0 [29/92]: LSM: Single calls in socket_getpeersec hooks + - SAUCE: apparmor4.0.0 [30/92]: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [31/92]: LSM: Identify which LSM handles the context + string + - SAUCE: apparmor4.0.0 [32/92]: AppArmor: Remove the exclusive flag + - SAUCE: apparmor4.0.0 [33/92]: LSM: Add mount opts blob size tracking + - SAUCE: apparmor4.0.0 [34/92]: LSM: allocate mnt_opts blobs instead of module + specific data + - SAUCE: apparmor4.0.0 [35/92]: LSM: Infrastructure management of the key + security blob + - SAUCE: apparmor4.0.0 [36/92]: LSM: Infrastructure management of the mnt_opts + security blob + - SAUCE: apparmor4.0.0 [37/92]: LSM: Remove lsmblob scaffolding + - SAUCE: apparmor4.0.0 [38/92]: LSM: Allow reservation of netlabel + - SAUCE: apparmor4.0.0 [39/92]: LSM: Correct handling of ENOSYS in + inode_setxattr + - SAUCE: apparmor4.0.0 [40/92]: LSM: restrict security_cred_getsecid() to a + single LSM + - SAUCE: apparmor4.0.0 [41/92]: Smack: Remove LSM_FLAG_EXCLUSIVE + + * Miscellaneous upstream changes + - fixup inode_set_attr + + -- Paolo Pisati Wed, 03 Jul 2024 11:23:40 +0200 + +linux-unstable (6.10.0-13.13) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-13.13 -proposed tracker (LP: #2071598) + + * Miscellaneous Ubuntu changes + - zfs FTBFS on s390x - temporarily disable it + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc6 + + -- Paolo Pisati Mon, 01 Jul 2024 11:57:44 +0200 + +linux-unstable (6.10.0-12.12) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-12.12 -proposed tracker (LP: #2071461) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.06.11) + + * noble:linux: ADT ubuntu-regression-suite misses fakeroot dependency + (LP: #2070042) + - [DEP-8] Add missing fakeroot dependency + + * Add Real-time Linux Analysis tool (rtla) to linux-tools (LP: #2059080) + - [Packaging] add Real-time Linux Analysis tool (rtla) to linux-tools + - [Packaging] update dependencies for rtla + + * failed to enable IPU6 camera sensor on kernel >= 6.8: ivsc_ace + intel_vsc-5db76cf6-0a68-4ed6-9b78-0361635e2447: switch camera to host + failed: -110 (LP: #2067364) + - SAUCE: media: ivsc: csi: don't count privacy on as error + - SAUCE: media: ivsc: csi: add separate lock for v4l2 control handler + - SAUCE: media: ivsc: csi: remove privacy status in struct mei_csi + - SAUCE: mei: vsc: Enhance IVSC chipset stability during warm reboot + - SAUCE: mei: vsc: Enhance SPI transfer of IVSC rom + - SAUCE: mei: vsc: Utilize the appropriate byte order swap function + - SAUCE: mei: vsc: Prevent timeout error with added delay post-firmware + download + + * Miscellaneous Ubuntu changes + - SAUCE: nvme-tcp: Do not terminate commands when in RESETTING + - SAUCE: nvme-tcp: make 'err_work' a delayed work + - SAUCE: nvme-tcp: delay error recovery until the next KATO interval + - SAUCE: nvme-tcp: add recovery_delay to sysfs + - [Packaging] rtla: workaround the empty LD variable + - [Packaging] Check do_lib_rust before linking Rust lib files + - [Config] toolchain version update + + -- Paolo Pisati Fri, 28 Jun 2024 15:37:27 +0200 + +linux-unstable (6.10.0-11.11) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-11.11 -proposed tracker (LP: #2070368) + + * Provide python perf module (LP: #2051560) + - [Packaging] enable perf python module + - [Packaging] provide a wrapper module for python-perf + + * Miscellaneous Ubuntu changes + - [Config] toolchain version update + - [Packaging] Fix python3-setuptools build-dep for tools/perf + + -- Paolo Pisati Tue, 25 Jun 2024 14:53:52 +0200 + +linux-unstable (6.10.0-10.10) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-10.10 -proposed tracker (LP: #2070030) + + * Miscellaneous Ubuntu changes + - [Config] arm64: disable RELR + - [Config] updateconfigs following v6.10-rc5 rebase + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc5 + + -- Paolo Pisati Mon, 24 Jun 2024 10:57:14 +0200 + +linux-unstable (6.10.0-7.7) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-7.7 -proposed tracker (LP: #2069713) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.06.11) + + * Miscellaneous Ubuntu changes + - SAUCE: Revert "mm: remove follow_pfn" + - [Packaging] debian.master/dkms-versions -- remove zfs-linux + + -- Paolo Pisati Tue, 18 Jun 2024 12:13:02 +0200 + +linux-unstable (6.10.0-6.6) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-6.6 -proposed tracker (LP: #2069590) + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc4 + - [Config] updateconfigs following v6.10-rc4 rebase + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc4 + + -- Paolo Pisati Mon, 17 Jun 2024 11:02:49 +0200 + +linux-unstable (6.10.0-5.5) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-5.5 -proposed tracker (LP: #2069031) + + * Miscellaneous Ubuntu changes + - [packaging] remove the kernel configuration for perf + - [Packaging] dkms-build: Support DEB822 sources + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc3 + + -- Paolo Pisati Tue, 11 Jun 2024 12:42:10 +0200 + +linux-unstable (6.10.0-4.4) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-4.4 -proposed tracker (LP: #2067887) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc2 + + -- Paolo Pisati Mon, 03 Jun 2024 11:52:09 +0200 + +linux-unstable (6.10.0-3.3) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-3.3 -proposed tracker (LP: #2067718) + + * Miscellaneous Ubuntu changes + - SAUCE: [packaging] `make scripts_gdb` target is broken upstream, to avoid a + FTBFS, do not try to install GDB_SCRIPTS + + -- Paolo Pisati Fri, 31 May 2024 13:17:14 +0200 + +linux-unstable (6.10.0-2.2) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-2.2 -proposed tracker (LP: #2067473) + + * Miscellaneous Ubuntu changes + - SAUCE: update hv_fcopy_daemon target to hv_fcopy_uio_daemon (following + upstream rename) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] update dependencies for rtla" + - Revert "UBUNTU: [Packaging] add Real-time Linux Analysis tool (rtla) to + linux-tools" + - Revert "UBUNTU: [Packaging] provide a wrapper module for python-perf" + - Revert "UBUNTU: [Packaging] enable perf python module" + + -- Paolo Pisati Wed, 29 May 2024 14:08:53 +0200 + +linux-unstable (6.10.0-1.1) oracular; urgency=medium + + * oracular/linux-unstable: 6.10.0-1.1 -proposed tracker (LP: #2067390) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.10 and rename to linux-unstable + - [Config] updateconfigs following v6.10-rc1 rebase + - SAUCE: (lockdown) security: use default hook return value + - debian.master/dkms-versions: temporarily remove all dkms + + * Miscellaneous Ubuntu changes + - rebase on v6.10-rc1 + + -- Paolo Pisati Tue, 28 May 2024 17:57:38 +0200 + +linux-unstable (6.10.0-0.0) oracular; urgency=medium + + * noble/linux: 6.8.0-34.34 -proposed tracker (LP: #2065167) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2024.04.29) + + -- Roxana Nicolescu Wed, 08 May 2024 13:14:41 +0200 + +linux (6.8.0-32.32) noble; urgency=medium + + * noble/linux: 6.8.0-32.32 -proposed tracker (LP: #2064344) + + * Packaging resync (LP: #1786013) + - [Packaging] drop getabis data + - [Packaging] update variants + - [Packaging] update annotations scripts + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/2024.04.29) + + * Enable Nezha board (LP: #1975592) + - [Config] Enable CONFIG_REGULATOR_FIXED_VOLTAGE on riscv64 + + * Enable Nezha board (LP: #1975592) // Enable StarFive VisionFive 2 board + (LP: #2013232) + - [Config] Enable CONFIG_SERIAL_8250_DW on riscv64 + + * RISC-V kernel config is out of sync with other archs (LP: #1981437) + - [Config] Sync riscv64 config with other architectures + + * obsolete out-of-tree ivsc dkms in favor of in-tree one (LP: #2061747) + - ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device + - Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" + - mei: vsc: Unregister interrupt handler for system suspend + - media: ipu-bridge: Add ov01a10 in Dell XPS 9315 + - SAUCE: media: ipu-bridge: Support more sensors + + * Fix after-suspend-mediacard/sdhc-insert test failed (LP: #2042500) + - PCI/ASPM: Move pci_configure_ltr() to aspm.c + - PCI/ASPM: Always build aspm.c + - PCI/ASPM: Move pci_save_ltr_state() to aspm.c + - PCI/ASPM: Save L1 PM Substates Capability for suspend/resume + - PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state() + - PCI/ASPM: Disable L1 before configuring L1 Substates + - PCI/ASPM: Update save_state when configuration changes + + * RTL8852BE fw security fail then lost WIFI function during suspend/resume + cycle (LP: #2063096) + - wifi: rtw89: download firmware with five times retry + + * intel_rapl_common: Add support for ARL and LNL (LP: #2061953) + - powercap: intel_rapl: Add support for Lunar Lake-M paltform + - powercap: intel_rapl: Add support for Arrow Lake + + * Kernel panic during checkbox stress_ng_test on Grace running noble 6.8 + (arm64+largemem) kernel (LP: #2058557) + - aio: Fix null ptr deref in aio_complete() wakeup + + * Avoid creating non-working backlight sysfs knob from ASUS board + (LP: #2060422) + - platform/x86: asus-wmi: Consider device is absent when the read is ~0 + + * Include cifs.ko in linux-modules package (LP: #2042546) + - [Packaging] Replace fs/cifs with fs/smb/client in inclusion list + + * Add Real-time Linux Analysis tool (rtla) to linux-tools (LP: #2059080) + - SAUCE: rtla: fix deb build + - [Packaging] add Real-time Linux Analysis tool (rtla) to linux-tools + - [Packaging] update dependencies for rtla + + * Noble update: v6.8.4 upstream stable release (LP: #2060533) + - Revert "workqueue: Shorten events_freezable_power_efficient name" + - Revert "workqueue: Don't call cpumask_test_cpu() with -1 CPU in + wq_update_node_max_active()" + - Revert "workqueue: Implement system-wide nr_active enforcement for unbound + workqueues" + - Revert "workqueue: Introduce struct wq_node_nr_active" + - Revert "workqueue: RCU protect wq->dfl_pwq and implement accessors for it" + - Revert "workqueue: Make wq_adjust_max_active() round-robin pwqs while + activating" + - Revert "workqueue: Move nr_active handling into helpers" + - Revert "workqueue: Replace pwq_activate_inactive_work() with + [__]pwq_activate_work()" + - Revert "workqueue: Factor out pwq_is_empty()" + - Revert "workqueue: Move pwq->max_active to wq->max_active" + - Revert "workqueue.c: Increase workqueue name length" + - Linux 6.8.4 + + * Noble update: v6.8.3 upstream stable release (LP: #2060531) + - drm/vmwgfx: Unmap the surface before resetting it on a plane state + - wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach + - wifi: brcmfmac: avoid invalid list operation when vendor attach fails + - media: staging: ipu3-imgu: Set fields before media_entity_pads_init() + - arm64: dts: qcom: sc7280: Add additional MSI interrupts + - remoteproc: virtio: Fix wdg cannot recovery remote processor + - clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd + - smack: Set SMACK64TRANSMUTE only for dirs in smack_inode_setxattr() + - smack: Handle SMACK64TRANSMUTE in smack_inode_setsecurity() + - arm: dts: marvell: Fix maxium->maxim typo in brownstone dts + - drm/vmwgfx: Fix possible null pointer derefence with invalid contexts + - arm64: dts: qcom: sm8450-hdk: correct AMIC4 and AMIC5 microphones + - serial: max310x: fix NULL pointer dereference in I2C instantiation + - drm/vmwgfx: Fix the lifetime of the bo cursor memory + - pci_iounmap(): Fix MMIO mapping leak + - media: xc4000: Fix atomicity violation in xc4000_get_frequency + - media: mc: Add local pad to pipeline regardless of the link state + - media: mc: Fix flags handling when creating pad links + - media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access + - media: mc: Add num_links flag to media_pad + - media: mc: Rename pad variable to clarify intent + - media: mc: Expand MUST_CONNECT flag to always require an enabled link + - media: nxp: imx8-isi: Mark all crossbar sink pads as MUST_CONNECT + - md: use RCU lock to protect traversal in md_spares_need_change() + - KVM: Always flush async #PF workqueue when vCPU is being destroyed + - arm64: dts: qcom: sm8550-qrd: correct WCD9385 TX port mapping + - arm64: dts: qcom: sm8550-mtp: correct WCD9385 TX port mapping + - cpufreq: amd-pstate: Fix min_perf assignment in amd_pstate_adjust_perf() + - thermal/intel: Fix intel_tcc_get_temp() to support negative CPU temperature + - powercap: intel_rapl: Fix a NULL pointer dereference + - powercap: intel_rapl: Fix locking in TPMI RAPL + - powercap: intel_rapl_tpmi: Fix a register bug + - powercap: intel_rapl_tpmi: Fix System Domain probing + - powerpc/smp: Adjust nr_cpu_ids to cover all threads of a core + - powerpc/smp: Increase nr_cpu_ids to include the boot CPU + - sparc64: NMI watchdog: fix return value of __setup handler + - sparc: vDSO: fix return value of __setup handler + - selftests/mqueue: Set timeout to 180 seconds + - pinctrl: qcom: sm8650-lpass-lpi: correct Kconfig name + - ext4: correct best extent lstart adjustment logic + - drm/amdgpu/display: Address kdoc for 'is_psr_su' in 'fill_dc_dirty_rects' + - block: Clear zone limits for a non-zoned stacked queue + - kasan/test: avoid gcc warning for intentional overflow + - bounds: support non-power-of-two CONFIG_NR_CPUS + - fat: fix uninitialized field in nostale filehandles + - fuse: fix VM_MAYSHARE and direct_io_allow_mmap + - mfd: twl: Select MFD_CORE + - ubifs: Set page uptodate in the correct place + - ubi: Check for too small LEB size in VTBL code + - ubi: correct the calculation of fastmap size + - ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path + - mtd: rawnand: meson: fix scrambling mode value in command macro + - md/md-bitmap: fix incorrect usage for sb_index + - x86/nmi: Fix the inverse "in NMI handler" check + - parisc/unaligned: Rewrite 64-bit inline assembly of emulate_ldd() + - parisc: Avoid clobbering the C/B bits in the PSW with tophys and tovirt + macros + - parisc: Fix ip_fast_csum + - parisc: Fix csum_ipv6_magic on 32-bit systems + - parisc: Fix csum_ipv6_magic on 64-bit systems + - parisc: Strip upper 32 bit of sum in csum_ipv6_magic for 64-bit builds + - md/raid5: fix atomicity violation in raid5_cache_count + - iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2 + - iio: adc: rockchip_saradc: use mask for write_enable bitfield + - docs: Restore "smart quotes" for quotes + - cpufreq: Limit resolving a frequency to policy min/max + - PM: suspend: Set mem_sleep_current during kernel command line setup + - vfio/pds: Always clear the save/restore FDs on reset + - clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays + - clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays + - clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays + - clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays + - clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays + - clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays + - clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays + - usb: xhci: Add error handling in xhci_map_urb_for_dma + - powerpc/fsl: Fix mfpmr build errors with newer binutils + - USB: serial: ftdi_sio: add support for GMC Z216C Adapter IR-USB + - USB: serial: add device ID for VeriFone adapter + - USB: serial: cp210x: add ID for MGP Instruments PDS100 + - wifi: mac80211: track capability/opmode NSS separately + - USB: serial: option: add MeiG Smart SLM320 product + - KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled + - USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113M + - PM: sleep: wakeirq: fix wake irq warning in system suspend + - mmc: tmio: avoid concurrent runs of mmc_request_done() + - fuse: replace remaining make_bad_inode() with fuse_make_bad() + - fuse: fix root lookup with nonzero generation + - fuse: don't unhash root + - usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros + - usb: dwc3-am62: fix module unload/reload behavior + - usb: dwc3-am62: Disable wakeup at remove + - serial: core: only stop transmit when HW fifo is empty + - serial: Lock console when calling into driver before registration + - btrfs: qgroup: always free reserved space for extent records + - btrfs: fix off-by-one chunk length calculation at contains_pending_extent() + - wifi: rtw88: Add missing VID/PIDs for 8811CU and 8821CU + - docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than + htmldocs + - PCI/PM: Drain runtime-idle callbacks before driver removal + - PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports + - Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"" + - md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume + - md: export helpers to stop sync_thread + - md: export helper md_is_rdwr() + - md: add a new helper reshape_interrupted() + - dm-raid: really frozen sync_thread during suspend + - md/dm-raid: don't call md_reap_sync_thread() directly + - dm-raid: add a new helper prepare_suspend() in md_personality + - dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent + with reshape + - dm-raid: fix lockdep waring in "pers->hot_add_disk" + - powerpc: xor_vmx: Add '-mhard-float' to CFLAGS + - mac802154: fix llsec key resources release in mac802154_llsec_key_del + - mm: swap: fix race between free_swap_and_cache() and swapoff() + - mmc: core: Fix switch on gp3 partition + - Bluetooth: btnxpuart: Fix btnxpuart_close + - leds: trigger: netdev: Fix kernel panic on interface rename trig notify + - drm/etnaviv: Restore some id values + - landlock: Warn once if a Landlock action is requested while disabled + - io_uring: fix mshot read defer taskrun cqe posting + - hwmon: (amc6821) add of_match table + - io_uring: fix io_queue_proc modifying req->flags + - ext4: fix corruption during on-line resize + - nvmem: meson-efuse: fix function pointer type mismatch + - slimbus: core: Remove usage of the deprecated ida_simple_xx() API + - phy: tegra: xusb: Add API to retrieve the port number of phy + - usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic + - speakup: Fix 8bit characters from direct synth + - debugfs: fix wait/cancellation handling during remove + - PCI/AER: Block runtime suspend when handling errors + - io_uring/net: correctly handle multishot recvmsg retry setup + - io_uring: fix mshot io-wq checks + - PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p + - sparc32: Fix parport build with sparc32 + - nfs: fix UAF in direct writes + - NFS: Read unlock folio on nfs_page_create_from_folio() error + - kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 + - PCI: qcom: Enable BDF to SID translation properly + - PCI: dwc: endpoint: Fix advertised resizable BAR size + - PCI: hv: Fix ring buffer size calculation + - cifs: prevent updating file size from server if we have a read/write lease + - cifs: allow changing password during remount + - thermal/drivers/mediatek: Fix control buffer enablement on MT7896 + - vfio/pci: Disable auto-enable of exclusive INTx IRQ + - vfio/pci: Lock external INTx masking ops + - vfio/platform: Disable virqfds on cleanup + - vfio/platform: Create persistent IRQ handlers + - vfio/fsl-mc: Block calling interrupt handler without trigger + - tpm,tpm_tis: Avoid warning splat at shutdown + - ksmbd: replace generic_fillattr with vfs_getattr + - ksmbd: retrieve number of blocks using vfs_getattr in + set_file_allocation_info + - platform/x86/intel/tpmi: Change vsec offset to u64 + - io_uring/rw: return IOU_ISSUE_SKIP_COMPLETE for multishot retry + - io_uring: clean rings on NO_MMAP alloc fail + - ring-buffer: Do not set shortest_full when full target is hit + - ring-buffer: Fix full_waiters_pending in poll + - ring-buffer: Use wait_event_interruptible() in ring_buffer_wait() + - tracing/ring-buffer: Fix wait_on_pipe() race + - dlm: fix user space lkb refcounting + - soc: fsl: qbman: Always disable interrupts when taking cgr_lock + - soc: fsl: qbman: Use raw spinlock for cgr_lock + - s390/zcrypt: fix reference counting on zcrypt card objects + - drm/probe-helper: warn about negative .get_modes() + - drm/panel: do not return negative error codes from drm_panel_get_modes() + - drm/exynos: do not return negative values from .get_modes() + - drm/imx/ipuv3: do not return negative values from .get_modes() + - drm/vc4: hdmi: do not return negative values from .get_modes() + - clocksource/drivers/timer-riscv: Clear timer interrupt on timer + initialization + - memtest: use {READ,WRITE}_ONCE in memory scanning + - Revert "block/mq-deadline: use correct way to throttling write requests" + - lsm: use 32-bit compatible data types in LSM syscalls + - lsm: handle the NULL buffer case in lsm_fill_user_ctx() + - f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag + - f2fs: truncate page cache before clearing flags when aborting atomic write + - nilfs2: fix failure to detect DAT corruption in btree and direct mappings + - nilfs2: prevent kernel bug at submit_bh_wbc() + - cifs: make sure server interfaces are requested only for SMB3+ + - cifs: reduce warning log level for server not advertising interfaces + - cifs: open_cached_dir(): add FILE_READ_EA to desired access + - mtd: rawnand: Fix and simplify again the continuous read derivations + - mtd: rawnand: Add a helper for calculating a page index + - mtd: rawnand: Ensure all continuous terms are always in sync + - mtd: rawnand: Constrain even more when continuous reads are enabled + - cpufreq: dt: always allocate zeroed cpumask + - io_uring/futex: always remove futex entry for cancel all + - io_uring/waitid: always remove waitid entry for cancel all + - x86/CPU/AMD: Update the Zenbleed microcode revisions + - ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16() + - net: esp: fix bad handling of pages from page_pool + - NFSD: Fix nfsd_clid_class use of __string_len() macro + - drm/i915: Add missing ; to __assign_str() macros in tracepoint code + - net: hns3: tracing: fix hclgevf trace event strings + - cxl/trace: Properly initialize cxl_poison region name + - ksmbd: fix potencial out-of-bounds when buffer offset is invalid + - virtio: reenable config if freezing device failed + - LoongArch: Change __my_cpu_offset definition to avoid mis-optimization + - LoongArch: Define the __io_aw() hook as mmiowb() + - LoongArch/crypto: Clean up useless assignment operations + - wireguard: netlink: check for dangling peer via is_dead instead of empty + list + - wireguard: netlink: access device through ctx instead of peer + - wireguard: selftests: set RISCV_ISA_FALLBACK on riscv{32,64} + - ahci: asm1064: asm1166: don't limit reported ports + - drm/amd/display: Change default size for dummy plane in DML2 + - drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag + - drm/amdgpu/pm: Fix NULL pointer dereference when get power limit + - drm/amdgpu/pm: Check the validity of overdiver power limit + - drm/amd/display: Override min required DCFCLK in dml1_validate + - drm/amd/display: Allow dirty rects to be sent to dmub when abm is active + - drm/amd/display: Init DPPCLK from SMU on dcn32 + - drm/amd/display: Update odm when ODM combine is changed on an otg master + pipe with no plane + - drm/amd/display: Fix idle check for shared firmware state + - drm/amd/display: Amend coasting vtotal for replay low hz + - drm/amd/display: Lock all enabled otg pipes even with no planes + - drm/amd/display: Implement wait_for_odm_update_pending_complete + - drm/amd/display: Return the correct HDCP error code + - drm/amd/display: Add a dc_state NULL check in dc_state_release + - drm/amd/display: Fix noise issue on HDMI AV mute + - dm snapshot: fix lockup in dm_exception_table_exit + - x86/pm: Work around false positive kmemleak report in msr_build_context() + - wifi: brcmfmac: add per-vendor feature detection callback + - wifi: brcmfmac: cfg80211: Use WSEC to set SAE password + - wifi: brcmfmac: Demote vendor-specific attach/detach messages to info + - drm/ttm: Make sure the mapped tt pages are decrypted when needed + - drm/amd/display: Unify optimize_required flags and VRR adjustments + - drm/amd/display: Add more checks for exiting idle in DC + - btrfs: add set_folio_extent_mapped() helper + - btrfs: replace sb::s_blocksize by fs_info::sectorsize + - btrfs: add helpers to get inode from page/folio pointers + - btrfs: add helpers to get fs_info from page/folio pointers + - btrfs: add helper to get fs_info from struct inode pointer + - btrfs: qgroup: validate btrfs_qgroup_inherit parameter + - vfio: Introduce interface to flush virqfd inject workqueue + - vfio/pci: Create persistent INTx handler + - drm/bridge: add ->edid_read hook and drm_bridge_edid_read() + - drm/bridge: lt8912b: use drm_bridge_edid_read() + - drm/bridge: lt8912b: clear the EDID property on failures + - drm/bridge: lt8912b: do not return negative values from .get_modes() + - drm/amd/display: Remove pixle rate limit for subvp + - drm/amd/display: Revert Remove pixle rate limit for subvp + - workqueue: Shorten events_freezable_power_efficient name + - drm/amd/display: Use freesync when `DRM_EDID_FEATURE_CONTINUOUS_FREQ` found + - netfilter: nf_tables: reject constant set with timeout + - Revert "crypto: pkcs7 - remove sha1 support" + - x86/efistub: Call mixed mode boot services on the firmware's stack + - ASoC: amd: yc: Revert "Fix non-functional mic on Lenovo 21J2" + - ASoC: amd: yc: Revert "add new YC platform variant (0x63) support" + - Fix memory leak in posix_clock_open() + - wifi: rtw88: 8821cu: Fix connection failure + - x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT + - x86/sev: Fix position dependent variable references in startup code + - clocksource/drivers/arm_global_timer: Fix maximum prescaler value + - ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores + - ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses + - entry: Respect changes to system call number by trace_sys_enter() + - swiotlb: Fix double-allocation of slots due to broken alignment handling + - swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc() + - swiotlb: Fix alignment checks when both allocation and DMA masks are present + - iommu/dma: Force swiotlb_max_mapping_size on an untrusted device + - printk: Update @console_may_schedule in console_trylock_spinning() + - irqchip/renesas-rzg2l: Flush posted write in irq_eoi() + - irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi() + - irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi() + - irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type + - kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address + - efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or + higher address + - x86/mpparse: Register APIC address only once + - x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD + - efi: fix panic in kdump kernel + - pwm: img: fix pwm clock lookup + - selftests/mm: Fix build with _FORTIFY_SOURCE + - btrfs: handle errors returned from unpin_extent_cache() + - btrfs: fix warning messages not printing interval at unpin_extent_range() + - btrfs: do not skip re-registration for the mounted device + - mfd: intel-lpss: Switch to generalized quirk table + - mfd: intel-lpss: Introduce QUIRK_CLOCK_DIVIDER_UNITY for XPS 9530 + - drm/i915: Replace a memset() with zero initialization + - drm/i915: Try to preserve the current shared_dpll for fastset on type-c + ports + - drm/i915: Include the PLL name in the debug messages + - drm/i915: Suppress old PLL pipe_mask checks for MG/TC/TBT PLLs + - crypto: iaa - Fix nr_cpus < nr_iaa case + - drm/amd/display: Prevent crash when disable stream + - ALSA: hda/tas2781: remove digital gain kcontrol + - ALSA: hda/tas2781: add locks to kcontrols + - mm: zswap: fix writeback shinker GFP_NOIO/GFP_NOFS recursion + - init: open /initrd.image with O_LARGEFILE + - x86/efistub: Add missing boot_params for mixed mode compat entry + - efi/libstub: Cast away type warning in use of max() + - x86/efistub: Reinstate soft limit for initrd loading + - prctl: generalize PR_SET_MDWE support check to be per-arch + - ARM: prctl: reject PR_SET_MDWE on pre-ARMv6 + - tmpfs: fix race on handling dquot rbtree + - btrfs: validate device maj:min during open + - btrfs: fix race in read_extent_buffer_pages() + - btrfs: zoned: don't skip block groups with 100% zone unusable + - btrfs: zoned: use zone aware sb location for scrub + - btrfs: zoned: fix use-after-free in do_zone_finish() + - wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes + - wifi: cfg80211: add a flag to disable wireless extensions + - wifi: iwlwifi: mvm: disable MLO for the time being + - wifi: iwlwifi: fw: don't always use FW dump trig + - wifi: iwlwifi: mvm: handle debugfs names more carefully + - Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP + displays without PSR" + - fbdev: Select I/O-memory framebuffer ops for SBus + - exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack() + - hexagon: vmlinux.lds.S: handle attributes section + - mm: cachestat: fix two shmem bugs + - selftests/mm: sigbus-wp test requires UFFD_FEATURE_WP_HUGETLBFS_SHMEM + - selftests/mm: fix ARM related issue with fork after pthread_create + - mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc + HS200 mode + - mmc: core: Initialize mmc_blk_ioc_data + - mmc: core: Avoid negative index with array access + - sdhci-of-dwcmshc: disable PM runtime in dwcmshc_remove() + - block: Do not force full zone append completion in req_bio_endio() + - thermal: devfreq_cooling: Fix perf state when calculate dfc res_util + - Revert "thermal: core: Don't update trip points inside the hysteresis range" + - nouveau/dmem: handle kcalloc() allocation failure + - net: ll_temac: platform_get_resource replaced by wrong function + - net: wan: framer: Add missing static inline qualifiers + - net: phy: qcom: at803x: fix kernel panic with at8031_probe + - drm/xe/query: fix gt_id bounds check + - drm/dp: Fix divide-by-zero regression on DP MST unplug with nouveau + - drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed + - drm/amdkfd: fix TLB flush after unmap for GFX9.4.2 + - drm/amdgpu: fix deadlock while reading mqd from debugfs + - drm/amd/display: Remove MPC rate control logic from DCN30 and above + - drm/amd/display: Set DCN351 BB and IP the same as DCN35 + - drm/i915/hwmon: Fix locking inversion in sysfs getter + - drm/i915/vma: Fix UAF on destroy against retire race + - drm/i915/bios: Tolerate devdata==NULL in + intel_bios_encoder_supports_dp_dual_mode() + - drm/i915/vrr: Generate VRR "safe window" for DSB + - drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly + - drm/i915/dsb: Fix DSB vblank waits when using VRR + - drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed() + - drm/i915: Pre-populate the cursor physical dma address + - drm/i915/gt: Reset queue_priority_hint on parking + - drm/amd/display: Fix bounds check for dcn35 DcfClocks + - Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync + - mtd: spinand: Add support for 5-byte IDs + - Revert "usb: phy: generic: Get the vbus supply" + - usb: cdc-wdm: close race between read and workqueue + - usb: misc: ljca: Fix double free in error handling path + - USB: UAS: return ENODEV when submit urbs fail with device not attached + - vfio/pds: Make sure migration file isn't accessed after reset + - ring-buffer: Make wake once of ring_buffer_wait() more robust + - btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache() + - ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs + - scsi: ufs: qcom: Provide default cycles_in_1us value + - scsi: sd: Fix TCG OPAL unlock on system resume + - scsi: core: Fix unremoved procfs host directory regression + - staging: vc04_services: changen strncpy() to strscpy_pad() + - staging: vc04_services: fix information leak in create_component() + - genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd + - usb: dwc3: Properly set system wakeup + - USB: core: Fix deadlock in usb_deauthorize_interface() + - USB: core: Add hub_get() and hub_put() routines + - USB: core: Fix deadlock in port "disable" sysfs attribute + - usb: dwc2: host: Fix remote wakeup from hibernation + - usb: dwc2: host: Fix hibernation flow + - usb: dwc2: host: Fix ISOC flow in DDMA mode + - usb: dwc2: gadget: Fix exiting from clock gating + - usb: dwc2: gadget: LPM flow fix + - usb: udc: remove warning when queue disabled ep + - usb: typec: ucsi: Fix race between typec_switch and role_switch + - usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd() + - usb: typec: tcpm: Correct port source pdo array in pd_set callback + - usb: typec: tcpm: Update PD of Type-C port upon pd_set + - usb: typec: Return size of buffer if pd_set operation succeeds + - usb: typec: ucsi: Clear EVENT_PENDING under PPM lock + - usb: typec: ucsi: Ack unsupported commands + - usb: typec: ucsi_acpi: Refactor and fix DELL quirk + - usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset + - scsi: qla2xxx: Prevent command send on chip reset + - scsi: qla2xxx: Fix N2N stuck connection + - scsi: qla2xxx: Split FCE|EFT trace control + - scsi: qla2xxx: Update manufacturer detail + - scsi: qla2xxx: NVME|FCP prefer flag not being honored + - scsi: qla2xxx: Fix command flush on cable pull + - scsi: qla2xxx: Fix double free of the ha->vp_map pointer + - scsi: qla2xxx: Fix double free of fcport + - scsi: qla2xxx: Change debug message during driver unload + - scsi: qla2xxx: Delay I/O Abort on PCI error + - x86/bugs: Fix the SRSO mitigation on Zen3/4 + - crash: use macro to add crashk_res into iomem early for specific arch + - drm/amd/display: fix IPX enablement + - x86/bugs: Use fixed addressing for VERW operand + - Revert "x86/bugs: Use fixed addressing for VERW operand" + - usb: dwc3: pci: Drop duplicate ID + - scsi: lpfc: Correct size for cmdwqe/rspwqe for memset() + - scsi: lpfc: Correct size for wqe for memset() + - scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type() + - scsi: libsas: Fix disk not being scanned in after being removed + - perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and + later + - x86/sev: Skip ROM range scans and validation for SEV-SNP guests + - tools/resolve_btfids: fix build with musl libc + - drm/amdgpu: fix use-after-free bug + - drm/sched: fix null-ptr-deref in init entity + - Linux 6.8.3 + - [Config] updateconfigs following v6.8.3 import + + * Noble update: v6.8.3 upstream stable release (LP: #2060531) // + [Ubuntu-24.04] Hugepage memory is not getting released even after destroying + the guest! (LP: #2062556) + - block: Fix page refcounts for unaligned buffers in __bio_release_pages() + + * [SPR][EMR][GNR] TDX: efi: TD Measurement support for kernel cmdline/initrd + sections from EFI stub (LP: #2060130) + - efi/libstub: Use TPM event typedefs from the TCG PC Client spec + - efi/tpm: Use symbolic GUID name from spec for final events table + - efi/libstub: Add Confidential Computing (CC) measurement typedefs + - efi/libstub: Measure into CC protocol if TCG2 protocol is absent + - efi/libstub: Add get_event_log() support for CC platforms + - x86/efistub: Remap kernel text read-only before dropping NX attribute + + * Fix acpi_power_meter accessing IPMI region before it's ready (LP: #2059263) + - ACPI: IPMI: Add helper to wait for when SMI is selected + - hwmon: (acpi_power_meter) Ensure IPMI space handler is ready on Dell systems + + * Drop fips-checks script from trees (LP: #2055083) + - [Packaging] Remove fips-checks script + + * alsa/realtek: adjust max output valume for headphone on 2 LG machines + (LP: #2058573) + - ALSA: hda/realtek: fix the hp playback volume issue for LG machines + + * Noble update: v6.8.2 upstream stable release (LP: #2060097) + - do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak + - workqueue.c: Increase workqueue name length + - workqueue: Move pwq->max_active to wq->max_active + - workqueue: Factor out pwq_is_empty() + - workqueue: Replace pwq_activate_inactive_work() with [__]pwq_activate_work() + - workqueue: Move nr_active handling into helpers + - workqueue: Make wq_adjust_max_active() round-robin pwqs while activating + - workqueue: RCU protect wq->dfl_pwq and implement accessors for it + - workqueue: Introduce struct wq_node_nr_active + - workqueue: Implement system-wide nr_active enforcement for unbound + workqueues + - workqueue: Don't call cpumask_test_cpu() with -1 CPU in + wq_update_node_max_active() + - iomap: clear the per-folio dirty bits on all writeback failures + - fs: Fix rw_hint validation + - io_uring: remove looping around handling traditional task_work + - io_uring: remove unconditional looping in local task_work handling + - s390/dasd: Use dev_*() for device log messages + - s390/dasd: fix double module refcount decrement + - fs/hfsplus: use better @opf description + - md: fix kmemleak of rdev->serial + - rcu/exp: Fix RCU expedited parallel grace period kworker allocation failure + recovery + - rcu/exp: Handle RCU expedited grace period kworker allocation failure + - fs/select: rework stack allocation hack for clang + - block: fix deadlock between bd_link_disk_holder and partition scan + - md: Don't clear MD_CLOSING when the raid is about to stop + - kunit: Setup DMA masks on the kunit device + - ovl: Always reject mounting over case-insensitive directories + - kunit: test: Log the correct filter string in executor_test + - lib/cmdline: Fix an invalid format specifier in an assertion msg + - lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg + - time: test: Fix incorrect format specifier + - rtc: test: Fix invalid format specifier. + - net: test: Fix printf format specifier in skb_segment kunit test + - drm/xe/tests: Fix printf format specifiers in xe_migrate test + - drm: tests: Fix invalid printf format specifiers in KUnit tests + - md/raid1: factor out helpers to add rdev to conf + - md/raid1: record nonrot rdevs while adding/removing rdevs to conf + - md/raid1: fix choose next idle in read_balance() + - io_uring/net: unify how recvmsg and sendmsg copy in the msghdr + - io_uring/net: move receive multishot out of the generic msghdr path + - io_uring/net: fix overflow check in io_recvmsg_mshot_prep() + - nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() + - aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts + - x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type + - x86/resctrl: Remove hard-coded memory bandwidth limit + - x86/resctrl: Read supported bandwidth sources from CPUID + - x86/resctrl: Implement new mba_MBps throttling heuristic + - x86/sme: Fix memory encryption setting if enabled by default and not + overridden + - timekeeping: Fix cross-timestamp interpolation on counter wrap + - timekeeping: Fix cross-timestamp interpolation corner case decision + - timekeeping: Fix cross-timestamp interpolation for non-x86 + - x86/asm: Remove the __iomem annotation of movdir64b()'s dst argument + - sched/fair: Take the scheduling domain into account in select_idle_smt() + - sched/fair: Take the scheduling domain into account in select_idle_core() + - wifi: ath10k: fix NULL pointer dereference in + ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() + - wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled + - wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled + - wifi: b43: Stop correct queue in DMA worker when QoS is disabled + - wifi: b43: Disable QoS for bcm4331 + - wifi: wilc1000: fix declarations ordering + - wifi: wilc1000: fix RCU usage in connect path + - wifi: ath11k: add support to select 6 GHz regulatory type + - wifi: ath11k: store cur_regulatory_info for each radio + - wifi: ath11k: fix a possible dead lock caused by ab->base_lock + - wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work + - wifi: wilc1000: do not realloc workqueue everytime an interface is added + - wifi: wilc1000: fix multi-vif management when deleting a vif + - wifi: mwifiex: debugfs: Drop unnecessary error check for + debugfs_create_dir() + - ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate + - arm64: dts: qcom: x1e80100: drop qcom,drv-count + - arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain + - arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency + - arm64: dts: qcom: sc8180x: Add missing CPU off state + - arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains + - arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX + - arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is on + - arm64: dts: qcom: sc8180x: Add missing CPU<->MDP_CFG path + - arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size + - cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value + - cpufreq: mediatek-hw: Wait for CPU supplies before probing + - sock_diag: annotate data-races around sock_diag_handlers[family] + - inet_diag: annotate data-races around inet_diag_table[] + - bpftool: Silence build warning about calloc() + - selftests/bpf: Fix potential premature unload in bpf_testmod + - libbpf: Apply map_set_def_max_entries() for inner_maps on creation + - selftest/bpf: Add map_in_maps with BPF_MAP_TYPE_PERF_EVENT_ARRAY values + - bpftool: Fix wrong free call in do_show_link + - wifi: ath12k: Fix issues in channel list update + - selftests/bpf: Fix the flaky tc_redirect_dtime test + - selftests/bpf: Wait for the netstamp_needed_key static key to be turned on + - wifi: cfg80211: add RNR with reporting AP information + - wifi: mac80211: use deflink and fix typo in link ID check + - wifi: iwlwifi: change link id in time event to s8 + - af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc(). + - arm64: dts: qcom: sm8450: Add missing interconnects to serial + - soc: qcom: socinfo: rename PM2250 to PM4125 + - arm64: dts: qcom: sc7280: Add static properties to cryptobam + - arm64: dts: qcom: qcm6490-fairphone-fp5: Add missing reserved-memory + - arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming + - arm64: dts: qcom: rename PM2250 to PM4125 + - cpufreq: mediatek-hw: Don't error out if supply is not found + - libbpf: Fix faccessat() usage on Android + - libbpf: fix __arg_ctx type enforcement for perf_event programs + - pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl + - arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc + - arm64: dts: renesas: r8a779g0: Restore sort order + - arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 + - selftests/bpf: Disable IPv6 for lwt_redirect test + - arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S i.MX8MM + - arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL i.MX8MM + - arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL + OSM-S board + - arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL + board + - arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL + OSM-S board + - arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL + board + - arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module + - arm64: dts: imx8qm: Align edma3 power-domains resources indentation + - arm64: dts: imx8qm: Correct edma3 power-domains and interrupt numbers + - libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim API + - wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete + - wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before + WMI_PEER_ASSOC_CMDID + - wifi: ath12k: fix fetching MCBC flag for QCN9274 + - wifi: iwlwifi: mvm: report beacon protection failures + - wifi: iwlwifi: dbg-tlv: ensure NUL termination + - wifi: iwlwifi: acpi: fix WPFC reading + - wifi: iwlwifi: mvm: initialize rates in FW earlier + - wifi: iwlwifi: fix EWRD table validity check + - wifi: iwlwifi: mvm: d3: fix IPN byte order + - wifi: iwlwifi: always have 'uats_enabled' + - wifi: iwlwifi: mvm: fix the TLC command after ADD_STA + - wifi: iwlwifi: read BIOS PNVM only for non-Intel SKU + - gpio: vf610: allow disabling the vf610 driver + - selftests/bpf: trace_helpers.c: do not use poisoned type + - bpf: make sure scalar args don't accept __arg_nonnull tag + - bpf: don't emit warnings intended for global subprogs for static subprogs + - arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS + - pwm: atmel-hlcdc: Fix clock imbalance related to suspend support + - net: blackhole_dev: fix build warning for ethh set but not used + - spi: consolidate setting message->spi + - spi: move split xfers for CS_WORD emulation + - arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node + - arm64: dts: ti: k3-j721s2: Fix power domain for VTM node + - arm64: dts: ti: k3-j784s4: Fix power domain for VTM node + - wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use + - wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer() + - arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP + - libbpf: fix return value for PERF_EVENT __arg_ctx type fix up check + - arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes + - arm64: dts: qcom: x1e80100-qcp: Fix supplies for LDOs 3E and 2J + - libbpf: Use OPTS_SET() macro in bpf_xdp_query() + - wifi: wfx: fix memory leak when starting AP + - arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY + - arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY + - arm64: dts: qcom: sm8650: Fix UFS PHY clocks + - wifi: ath12k: fix incorrect logic of calculating vdev_stats_id + - printk: nbcon: Relocate 32bit seq macros + - printk: ringbuffer: Do not skip non-finalized records with prb_next_seq() + - printk: Wait for all reserved records with pr_flush() + - printk: Add this_cpu_in_panic() + - printk: ringbuffer: Cleanup reader terminology + - printk: ringbuffer: Skip non-finalized records in panic + - printk: Disable passing console lock owner completely during panic() + - pwm: sti: Fix capture for st,pwm-num-chan < st,capture-num-chan + - tools/resolve_btfids: Refactor set sorting with types from btf_ids.h + - tools/resolve_btfids: Fix cross-compilation to non-host endianness + - wifi: iwlwifi: support EHT for WH + - wifi: iwlwifi: properly check if link is active + - wifi: iwlwifi: mvm: fix erroneous queue index mask + - wifi: iwlwifi: mvm: don't set the MFP flag for the GTK + - wifi: iwlwifi: mvm: don't set replay counters to 0xff + - s390/pai: fix attr_event_free upper limit for pai device drivers + - s390/vdso: drop '-fPIC' from LDFLAGS + - arm64: dts: qcom: qcm6490-idp: Correct the voltage setting for vph_pwr + - arm64: dts: qcom: qcs6490-rb3gen2: Correct the voltage setting for vph_pwr + - selftests: forwarding: Add missing config entries + - selftests: forwarding: Add missing multicast routing config entries + - arm64: dts: qcom: sm6115: drop pipe clock selection + - ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down() + - arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs + - arm64: dts: mediatek: mt7986: fix reference to PWM in fan node + - arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock name + - arm64: dts: mediatek: mt7986: fix SPI bus width properties + - arm64: dts: mediatek: mt7986: fix SPI nodename + - arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM + - arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg + - arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection node + - arm64: dts: mediatek: mt8192: fix vencoder clock name + - arm64: dts: mediatek: mt8186: fix VENC power domain clocks + - arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes + - can: m_can: Start/Cancel polling timer together with interrupts + - wifi: iwlwifi: mvm: Fix the listener MAC filter flags + - bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly + - arm64: dts: qcom: sdm845: Use the Low Power Island CX/MX for SLPI + - soc: qcom: llcc: Check return value on Broadcast_OR reg read + - ARM: dts: qcom: msm8974: correct qfprom node size + - arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains + - arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers + - arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay + - cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency + - wifi: wilc1000: prevent use-after-free on vif when cleaning up all + interfaces + - pwm: dwc: use pm_sleep_ptr() macro + - arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number + - arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number + - arm64: dts: ti: k3-am62-main: disable usb lpm + - ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit() + - bus: tegra-aconnect: Update dependency to ARCH_TEGRA + - iommu/amd: Mark interrupt as managed + - wifi: brcmsmac: avoid function pointer casts + - arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios + - arm64: dts: qcom: sm8150: correct PCIe wake-gpios + - powercap: dtpm_cpu: Fix error check against freq_qos_add_request() + - net: ena: Remove ena_select_queue + - arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and + mcu_uart0 + - arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from + mcu_uart0 + - arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS + in wkup_uart0 + - arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 + - arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC + - arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow + - arm64: dts: ti: Add common1 register space for AM65x SoC + - arm64: dts: ti: Add common1 register space for AM62x SoC + - firmware: arm_scmi: Fix double free in SMC transport cleanup path + - wifi: cfg80211: set correct param change count in ML element + - arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux + - arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl + - arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS + - wifi: wilc1000: revert reset line logic flip + - ARM: dts: arm: realview: Fix development chip ROM compatible value + - memory: tegra: Correct DLA client names + - wifi: mt76: mt7996: fix fw loading timeout + - wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz band + - wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz band + - wifi: mt76: mt7925: fix mcu query command fail + - wifi: mt76: mt7925: fix wmm queue mapping + - wifi: mt76: mt7925: fix fw download fail + - wifi: mt76: mt7925: fix WoW failed in encrypted mode + - wifi: mt76: mt7925: fix the wrong header translation config + - wifi: mt76: mt7925: add flow to avoid chip bt function fail + - wifi: mt76: mt7925: add support to set ifs time by mcu command + - wifi: mt76: mt7925: update PCIe DMA settings + - wifi: mt76: mt7996: check txs format before getting skb by pid + - wifi: mt76: mt7996: fix TWT issues + - wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps + - wifi: mt76: mt7996: fix HE beamformer phy cap for station vif + - wifi: mt76: mt7996: fix efuse reading issue + - wifi: mt76: mt7996: fix HIF_TXD_V2_1 value + - wifi: mt76: mt792x: fix ethtool warning + - wifi: mt76: mt7921e: fix use-after-free in free_irq() + - wifi: mt76: mt7925e: fix use-after-free in free_irq() + - wifi: mt76: mt7921: fix incorrect type conversion for CLC command + - wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel + config from ACPI + - wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177 + - arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes + - arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node + - arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs + - arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes + - arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes + - net: mctp: copy skb ext data when fragmenting + - pstore: inode: Only d_invalidate() is needed + - arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF + - ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address + - ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node + - arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM + SBC + - arm64: dts: imx8mp-evk: Fix hdmi@3d node + - regulator: userspace-consumer: add module device table + - gpiolib: Pass consumer device through to core in + devm_fwnode_gpiod_get_index() + - arm64: dts: marvell: reorder crypto interrupts on Armada SoCs + - ACPI: resource: Do IRQ override on Lunnen Ground laptops + - ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override + - ACPI: scan: Fix device check notification handling + - arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu + - arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller + - arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s + - objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks + - x86, relocs: Ignore relocations in .notes section + - SUNRPC: fix a memleak in gss_import_v2_context + - SUNRPC: fix some memleaks in gssx_dec_option_array + - arm64: dts: qcom: sm8550: Fix SPMI channels size + - arm64: dts: qcom: sm8650: Fix SPMI channels size + - mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove + function + - ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors + - btrfs: fix race when detecting delalloc ranges during fiemap + - wifi: rtw88: 8821cu: Fix firmware upload fail + - wifi: rtw88: 8821c: Fix beacon loss and disconnect + - wifi: rtw88: 8821c: Fix false alarm count + - wifi: brcm80211: handle pmk_op allocation failure + - riscv: dts: starfive: jh7100: fix root clock names + - PCI: Make pci_dev_is_disconnected() helper public for other drivers + - iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected + - iommu/vt-d: Use rbtree to track iommu probed devices + - iommu/vt-d: Improve ITE fault handling if target device isn't present + - iommu/vt-d: Use device rbtree in iopf reporting path + - iommu: Add static iommu_ops->release_domain + - iommu/vt-d: Fix NULL domain on device release + - igc: Fix missing time sync events + - igb: Fix missing time sync events + - ice: fix stats being updated by way too large values + - Bluetooth: Remove HCI_POWER_OFF_TIMEOUT + - Bluetooth: mgmt: Remove leftover queuing of power_off work + - Bluetooth: Remove superfluous call to hci_conn_check_pending() + - Bluetooth: Remove BT_HS + - Bluetooth: hci_event: Fix not indicating new connection for BIG Sync + - Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional() + - Bluetooth: hci_core: Cancel request on command timeout + - Bluetooth: hci_sync: Fix overwriting request callback + - Bluetooth: hci_h5: Add ability to allocate memory for private data + - Bluetooth: btrtl: fix out of bounds memory access + - Bluetooth: hci_core: Fix possible buffer overflow + - Bluetooth: msft: Fix memory leak + - Bluetooth: btusb: Fix memory leak + - Bluetooth: af_bluetooth: Fix deadlock + - Bluetooth: fix use-after-free in accessing skb after sending it + - sr9800: Add check for usbnet_get_endpoints + - s390/cache: prevent rebuild of shared_cpu_list + - bpf: Fix DEVMAP_HASH overflow check on 32-bit arches + - bpf: Fix hashtab overflow check on 32-bit arches + - bpf: Fix stackmap overflow check on 32-bit arches + - net: dsa: microchip: make sure drive strength configuration is not lost by + soft reset + - dpll: spec: use proper enum for pin capabilities attribute + - iommu: Fix compilation without CONFIG_IOMMU_INTEL + - ipv6: fib6_rules: flush route cache when rule is changed + - net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() + - octeontx2-af: Fix devlink params + - net: phy: fix phy_get_internal_delay accessing an empty array + - dpll: fix dpll_xa_ref_*_del() for multiple registrations + - net: hns3: fix wrong judgment condition issue + - net: hns3: fix kernel crash when 1588 is received on HIP08 devices + - net: hns3: fix port duplex configure error in IMP reset + - Bluetooth: Fix eir name length + - net: phy: dp83822: Fix RGMII TX delay configuration + - erofs: fix lockdep false positives on initializing erofs_pseudo_mnt + - OPP: debugfs: Fix warning around icc_get_name() + - tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function + - ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() + function + - l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() + function + - udp: fix incorrect parameter validation in the udp_lib_getsockopt() function + - net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function + - net/x25: fix incorrect parameter validation in the x25_getsockopt() function + - devlink: Fix length of eswitch inline-mode + - r8152: fix unknown device for choose_configuration + - nfp: flower: handle acti_netdevs allocation failure + - bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes() + - dm raid: fix false positive for requeue needed during reshape + - dm: call the resume method on internal suspend + - fbdev/simplefb: change loglevel when the power domains cannot be parsed + - drm/tegra: dsi: Add missing check for of_find_device_by_node + - drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe + - drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe() + - drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path + of tegra_dsi_probe() + - drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe() + - drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe() + - drm/tegra: rgb: Fix missing clk_put() in the error handling paths of + tegra_dc_rgb_probe() + - drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths + of tegra_output_probe() + - drm/rockchip: inno_hdmi: Fix video timing + - drm: Don't treat 0 as -1 in drm_fixp2int_ceil + - drm/vkms: Avoid reading beyond LUT array + - drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node + - drm/rockchip: lvds: do not overwrite error code + - drm/rockchip: lvds: do not print scary message when probing defer + - drm/panel-edp: use put_sync in unprepare + - drm/lima: fix a memleak in lima_heap_alloc + - ASoC: amd: acp: Add missing error handling in sof-mach + - ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe() + - ASoC: SOF: core: Skip firmware test for custom loaders + - ASoC: SOF: amd: Compute file paths on firmware load + - soundwire: stream: add missing const to Documentation + - dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA + - media: tc358743: register v4l2 async device only after successful setup + - media: cadence: csi2rx: use match fwnode for media link + - PCI/DPC: Print all TLP Prefixes, not just the first + - perf record: Fix possible incorrect free in record__switch_output() + - perf record: Check conflict between '--timestamp-filename' option and pipe + mode before recording + - HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd + - drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' + - perf pmu: Treat the msr pmu as software + - crypto: qat - avoid memcpy() overflow warning + - ALSA: hda: cs35l41: Set Channel Index correctly when system is missing _DSD + - drm/amd/display: Fix potential NULL pointer dereferences in + 'dcn10_set_output_transfer_func()' + - ASoC: sh: rz-ssi: Fix error message print + - drm/vmwgfx: Fix vmw_du_get_cursor_mob fencing of newly-created MOBs + - clk: renesas: r8a779g0: Fix PCIe clock name + - pinctrl: renesas: rzg2l: Fix locking in rzg2l_dt_subnode_to_map() + - pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function + - clk: samsung: exynos850: Propagate SPI IPCLK rate change + - media: v4l2: cci: print leading 0 on error + - perf evsel: Fix duplicate initialization of data->id in + evsel__parse_sample() + - perf bpf: Clean up the generated/copied vmlinux.h + - clk: meson: Add missing clocks to axg_clk_regmaps + - media: em28xx: annotate unchecked call to media_device_register() + - media: v4l2-tpg: fix some memleaks in tpg_alloc + - media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity + - media: dt-bindings: techwell,tw9900: Fix port schema ref + - mtd: spinand: esmt: Extend IDs to 5 bytes + - media: edia: dvbdev: fix a use-after-free + - pinctrl: mediatek: Drop bogus slew rate register range for MT8186 + - pinctrl: mediatek: Drop bogus slew rate register range for MT8192 + - drm/amdgpu: Fix potential out-of-bounds access in + 'amdgpu_discovery_reg_base_init()' + - clk: qcom: reset: Commonize the de/assert functions + - clk: qcom: reset: Ensure write completion on reset de/assertion + - quota: Fix potential NULL pointer dereference + - quota: Fix rcu annotations of inode dquot pointers + - quota: Properly annotate i_dquot arrays with __rcu + - ASoC: Intel: ssp-common: Add stub for sof_ssp_get_codec_name + - PCI/P2PDMA: Fix a sleeping issue in a RCU read section + - PCI: switchtec: Fix an error handling path in switchtec_pci_probe() + - crypto: xilinx - call finalize with bh disabled + - drivers/ps3: select VIDEO to provide cmdline functions + - perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str() + - perf srcline: Add missed addr2line closes + - dt-bindings: msm: qcom, mdss: Include ommited fam-b compatible + - drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN + - drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled + - drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode() + - drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() + - clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks + - clk: renesas: r8a779f0: Correct PFC/GPIO parent clock + - clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 + mux + - ALSA: seq: fix function cast warnings + - perf expr: Fix "has_event" function for metric style events + - perf stat: Avoid metric-only segv + - perf metric: Don't remove scale from counts + - ASoC: meson: aiu: fix function pointer type mismatch + - ASoC: meson: t9015: fix function pointer type mismatch + - powerpc: Force inlining of arch_vmap_p{u/m}d_supported() + - ASoC: SOF: Add some bounds checking to firmware data + - drm: ci: use clk_ignore_unused for apq8016 + - NTB: fix possible name leak in ntb_register_device() + - media: cedrus: h265: Fix configuring bitstream size + - media: sun8i-di: Fix coefficient writes + - media: sun8i-di: Fix power on/off sequences + - media: sun8i-di: Fix chroma difference threshold + - staging: media: starfive: Set 16 bpp for capture_raw device + - media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak + - media: go7007: add check of return value of go7007_read_addr() + - media: pvrusb2: remove redundant NULL check + - media: videobuf2: Add missing doc comment for waiting_in_dqbuf + - media: pvrusb2: fix pvr2_stream_callback casts + - clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times + - drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()' + - drm/panel: boe-tv101wum-nl6: make use of prepare_prev_first + - drm/msm/dpu: finalise global state object + - drm/mediatek: dsi: Fix DSI RGB666 formats and definitions + - PCI: Mark 3ware-9650SE Root Port Extended Tags as broken + - drm/bridge: adv7511: fix crash on irq during probe + - pinctrl: renesas: Allow the compiler to optimize away sh_pfc_pm + - clk: hisilicon: hi3519: Release the correct number of gates in + hi3519_clk_unregister() + - clk: hisilicon: hi3559a: Fix an erroneous devm_kfree() + - clk: mediatek: mt8135: Fix an error handling path in + clk_mt8135_apmixed_probe() + - clk: mediatek: mt7622-apmixedsys: Fix an error handling path in + clk_mt8135_apmixed_probe() + - clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF + - clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical + - drm/tegra: put drm_gem_object ref on error in tegra_fb_create + - tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning + - media: ivsc: csi: Swap SINK and SOURCE pads + - media: i2c: imx290: Fix IMX920 typo + - mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref + - mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a + ref + - perf print-events: make is_event_supported() more robust + - crypto: arm/sha - fix function cast warnings + - crypto: ccp - Avoid discarding errors in psp_send_platform_access_msg() + - crypto: qat - remove unused macros in qat_comp_alg.c + - crypto: qat - removed unused macro in adf_cnv_dbgfs.c + - crypto: qat - avoid division by zero + - crypto: qat - remove double initialization of value + - crypto: qat - fix ring to service map for dcc in 4xxx + - crypto: qat - fix ring to service map for dcc in 420xx + - crypto: jitter - fix CRYPTO_JITTERENTROPY help text + - drm/tidss: Fix initial plane zpos values + - drm/tidss: Fix sync-lost issue with two displays + - clk: imx: imx8mp: Fix SAI_MCLK_SEL definition + - mtd: maps: physmap-core: fix flash size larger than 32-bit + - mtd: rawnand: lpc32xx_mlc: fix irq handler prototype + - mtd: rawnand: brcmnand: exec_op helper functions return type fixes + - ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs + - ASoC: meson: axg-tdm-interface: add frame rate constraint + - drm/msm/a6xx: specify UBWC config for sc7180 + - drm/msm/a7xx: Fix LLC typo + - dt-bindings: arm-smmu: fix SM8[45]50 GPU SMMU if condition + - perf pmu: Fix a potential memory leak in perf_pmu__lookup() + - HID: amd_sfh: Update HPD sensor structure elements + - HID: amd_sfh: Avoid disabling the interrupt + - drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int() + - media: pvrusb2: fix uaf in pvr2_context_set_notify + - media: dvb-frontends: avoid stack overflow warnings with clang + - media: go7007: fix a memleak in go7007_load_encoder + - media: ttpci: fix two memleaks in budget_av_attach + - media: mediatek: vcodec: avoid -Wcast-function-type-strict warning + - arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang + - drm/tests: helpers: Include missing drm_drv header + - drm/amd/pm: Fix esm reg mask use to get pcie speed + - gpio: nomadik: fix offset bug in nmk_pmx_set() + - drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip + - mfd: cs42l43: Fix wrong register defaults + - powerpc/32: fix ADB_CUDA kconfig warning + - powerpc/pseries: Fix potential memleak in papr_get_attr() + - powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks + - clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' + - clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' + - clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset + - perf vendor events amd: Fix Zen 4 cache latency events + - drm/msm/dpu: allow certain formats for CDM for DP + - drm/msm/dpu: add division of drm_display_mode's hskew parameter + - media: usbtv: Remove useless locks in usbtv_video_free() + - drm/xe: Fix ref counting leak on page fault + - drm/xe: Replace 'grouped target' in Makefile with pattern rule + - lib/stackdepot: fix first entry having a 0-handle + - lib/stackdepot: off by one in depot_fetch_stack() + - modules: wait do_free_init correctly + - mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults + - power: supply: mm8013: fix "not charging" detection + - powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. + - powerpc/4xx: Fix warp_gpio_leds build failure + - RISC-V: KVM: Forward SEED CSR access to user space + - leds: aw2013: Unlock mutex before destroying it + - leds: sgm3140: Add missing timer cleanup and flash gpio control + - backlight: hx8357: Fix potential NULL pointer dereference + - backlight: ktz8866: Correct the check for of_property_read_u32 + - backlight: lm3630a: Initialize backlight_properties on init + - backlight: lm3630a: Don't set bl->props.brightness in get_brightness + - backlight: da9052: Fully initialize backlight_properties during probe + - backlight: lm3639: Fully initialize backlight_properties during probe + - backlight: lp8788: Fully initialize backlight_properties during probe + - sparc32: Use generic cmpdi2/ucmpdi2 variants + - mtd: maps: sun_uflash: Declare uflash_devinit static + - sparc32: Do not select GENERIC_ISA_DMA + - sparc32: Fix section mismatch in leon_pci_grpci + - clk: Fix clk_core_get NULL dereference + - clk: zynq: Prevent null pointer dereference caused by kmalloc failure + - PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling + - cifs: Fix writeback data corruption + - ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops + - ALSA: hda/tas2781: use dev_dbg in system_resume + - ALSA: hda/tas2781: add lock to system_suspend + - ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend + - ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend + - ALSA: hda/tas2781: restore power state after system_resume + - ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection + - ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values + - ALSA: scarlett2: Fix Scarlett 4th Gen input gain range + - ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again + - mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function + - platform/x86/intel/pmc/lnl: Remove SSRAM support + - platform/x86/intel/pmc/arl: Put GNA device in D3 + - platform/x86/amd/pmf: Do not use readl() for policy buffer access + - ALSA: usb-audio: Stop parsing channels bits when all channels are found. + - phy: qcom: qmp-usb: split USB-C PHY driver + - phy: qcom: qmp-usbc: add support for the Type-C handling + - phy: qcom: qmp-usbc: handle CLAMP register in a correct way + - scsi: hisi_sas: Fix a deadlock issue related to automatic dump + - RDMA/irdma: Remove duplicate assignment + - RDMA/srpt: Do not register event handler until srpt device is fully setup + - f2fs: compress: fix to guarantee persisting compressed blocks by CP + - f2fs: compress: fix to cover normal cluster write with cp_rwsem + - f2fs: compress: fix to check unreleased compressed cluster + - f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode + - f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic + - f2fs: zone: fix to wait completion of last bio in zone correctly + - f2fs: fix NULL pointer dereference in f2fs_submit_page_write() + - f2fs: compress: fix to cover f2fs_disable_compressed_file() w/ i_sem + - f2fs: fix to avoid potential panic during recovery + - scsi: csiostor: Avoid function pointer casts + - i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling + - RDMA/hns: Fix mis-modifying default congestion control algorithm + - RDMA/device: Fix a race between mad_client and cm_client init + - RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store() + - scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn + - f2fs: fix to create selinux label during whiteout initialization + - f2fs: compress: fix to check zstd compress level correctly in mount option + - net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr() + - NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102 + - NFSv4.2: fix listxattr maximum XDR buffer size + - f2fs: compress: fix to check compress flag w/ .i_sem lock + - f2fs: check number of blocks in a current section + - watchdog: starfive: Check pm_runtime_enabled() before decrementing usage + counter + - watchdog: stm32_iwdg: initialize default timeout + - f2fs: fix to use correct segment type in f2fs_allocate_data_block() + - f2fs: ro: compress: fix to avoid caching unaligned extent + - RDMA/mana_ib: Fix bug in creation of dma regions + - RDMA/mana_ib: Introduce mdev_to_gc helper function + - RDMA/mana_ib: Introduce mana_ib_get_netdev helper function + - RDMA/mana_ib: Introduce mana_ib_install_cq_cb helper function + - RDMA/mana_ib: Use virtual address in dma regions for MRs + - Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 + - NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt + - NFS: Fix an off by one in root_nfs_cat() + - NFSv4.1/pnfs: fix NFS with TLS in pnfs + - ACPI: HMAT: Remove register of memory node for generic target + - f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks + - f2fs: compress: fix reserve_cblocks counting error when out of space + - f2fs: fix to truncate meta inode pages forcely + - f2fs: zone: fix to remove pow2 check condition for zoned block device + - cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location + - perf/x86/amd/core: Avoid register reset when CPU is dead + - afs: Revert "afs: Hide silly-rename files from userspace" + - afs: Don't cache preferred address + - afs: Fix occasional rmdir-then-VNOVNODE with generic/011 + - f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault + - nfs: fix panic when nfs4_ff_layout_prepare_ds() fails + - ovl: relax WARN_ON in ovl_verify_area() + - io_uring/net: correct the type of variable + - remoteproc: stm32: Fix incorrect type in assignment for va + - remoteproc: stm32: Fix incorrect type assignment returned by + stm32_rproc_get_loaded_rsc_tablef + - iio: pressure: mprls0025pa fix off-by-one enum + - usb: phy: generic: Get the vbus supply + - tty: vt: fix 20 vs 0x20 typo in EScsiignore + - serial: max310x: fix syntax error in IRQ error message + - tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT + - arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells + - coresight: Fix issue where a source device's helpers aren't disabled + - coresight: etm4x: Set skip_power_up in etm4_init_arch_data function + - xhci: Add interrupt pending autoclear flag to each interrupter + - xhci: make isoc_bei_interval variable interrupter specific. + - xhci: remove unnecessary event_ring_deq parameter from xhci_handle_event() + - xhci: update event ring dequeue pointer position to controller correctly + - coccinelle: device_attr_show: Remove useless expression STR + - kconfig: fix infinite loop when expanding a macro at the end of file + - iio: gts-helper: Fix division loop + - bus: mhi: ep: check the correct variable in mhi_ep_register_controller() + - hwtracing: hisi_ptt: Move type check to the beginning of + hisi_ptt_pmu_event_init() + - rtc: mt6397: select IRQ_DOMAIN instead of depending on it + - rtc: max31335: fix interrupt status reg + - serial: 8250_exar: Don't remove GPIO device on suspend + - staging: greybus: fix get_channel_from_mode() failure path + - mei: vsc: Call wake_up() in the threaded IRQ handler + - mei: vsc: Don't use sleeping condition in wait_event_timeout() + - usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin + - char: xilinx_hwicap: Fix NULL vs IS_ERR() bug + - x86/hyperv: Use per cpu initial stack for vtl context + - ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin + - thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error + handling path + - thermal/drivers/qoriq: Fix getting tmu range + - io_uring: don't save/restore iowait state + - spi: lpspi: Avoid potential use-after-free in probe() + - spi: Restore delays for non-GPIO chip select + - ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates + - nouveau: reset the bo resource bus info after an eviction + - tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge() + - rds: tcp: Fix use-after-free of net in reqsk_timer_handler(). + - octeontx2-af: Use matching wake_up API variant in CGX command interface + - s390/vtime: fix average steal time calculation + - net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check + - devlink: Fix devlink parallel commands processing + - riscv: Only check online cpus for emulated accesses + - soc: fsl: dpio: fix kcalloc() argument order + - cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw() + - io_uring: Fix release of pinned pages when __io_uaddr_map fails + - tcp: Fix refcnt handling in __inet_hash_connect(). + - vmxnet3: Fix missing reserved tailroom + - hsr: Fix uninit-value access in hsr_get_node() + - net: txgbe: fix clk_name exceed MAX_DEV_ID limits + - spi: spi-mem: add statistics support to ->exec_op() calls + - spi: Fix error code checking in spi_mem_exec_op() + - nvme: fix reconnection fail due to reserved tag allocation + - drm/xe: Invalidate userptr VMA on page pin fault + - drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC + - net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up + - net: ethernet: mtk_eth_soc: fix PPE hanging issue + - io_uring: fix poll_remove stalled req completion + - ASoC: SOF: amd: Move signed_fw_image to struct acp_quirk_entry + - ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED + - riscv: Fix compilation error with FAST_GUP and rv32 + - xen/evtchn: avoid WARN() when unbinding an event channel + - xen/events: increment refcnt only if event channel is refcounted + - packet: annotate data-races around ignore_outgoing + - xfrm: Allow UDP encapsulation only in offload modes + - net: veth: do not manipulate GRO when using XDP + - net: dsa: mt7530: prevent possible incorrect XTAL frequency selection + - spi: spi-imx: fix off-by-one in mx51 CPU mode burst length + - drm: Fix drm_fixp2int_round() making it add 0.5 + - virtio: uapi: Drop __packed attribute in linux/virtio_pci.h + - vdpa_sim: reset must not run + - vdpa/mlx5: Allow CVQ size changes + - virtio: packed: fix unmap leak for indirect desc table + - net: move dev->state into net_device_read_txrx group + - wireguard: receive: annotate data-race around receiving_counter.counter + - rds: introduce acquire/release ordering in acquire/release_in_xmit() + - hsr: Handle failures in module init + - ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels + - nouveau/gsp: don't check devinit disable on GSP. + - ceph: stop copying to iter at EOF on sync reads + - net: phy: fix phy_read_poll_timeout argument type in genphy_loopback + - dm-integrity: fix a memory leak when rechecking the data + - net/bnx2x: Prevent access to a freed page in page_pool + - devlink: fix port new reply cmd type + - octeontx2: Detect the mbox up or down message via register + - octeontx2-pf: Wait till detach_resources msg is complete + - octeontx2-pf: Use default max_active works instead of one + - octeontx2-pf: Send UP messages to VF only when VF is up. + - octeontx2-af: Use separate handlers for interrupts + - drm/amdgpu: add MMHUB 3.3.1 support + - drm/amdgpu: fix mmhub client id out-of-bounds access + - drm/amdgpu: drop setting buffer funcs in sdma442 + - netfilter: nft_set_pipapo: release elements in clone only from destroy path + - netfilter: nf_tables: do not compare internal table flags on updates + - rcu: add a helper to report consolidated flavor QS + - net: report RCU QS on threaded NAPI repolling + - bpf: report RCU QS in cpumap kthread + - net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports + - net: dsa: mt7530: fix handling of all link-local frames + - netfilter: nf_tables: Fix a memory leak in nf_tables_updchain + - spi: spi-mt65xx: Fix NULL pointer access in interrupt handler + - selftests: forwarding: Fix ping failure due to short timeout + - dm io: Support IO priority + - dm-integrity: align the outgoing bio in integrity_recheck + - x86/efistub: Clear decompressor BSS in native EFI entrypoint + - x86/efistub: Don't clear BSS twice in mixed mode + - printk: Adjust mapping for 32bit seq macros + - printk: Use prb_first_seq() as base for 32bit seq macros + - Linux 6.8.2 + - [Config] updateconfig following v6.8.2 import + + * Provide python perf module (LP: #2051560) + - [Packaging] enable perf python module + - [Packaging] provide a wrapper module for python-perf + + * To support AMD Adaptive Backlight Management (ABM) for power profiles daemon + >= 2.0 (LP: #2056716) + - drm/amd/display: add panel_power_savings sysfs entry to eDP connectors + - drm/amdgpu: respect the abmlevel module parameter value if it is set + + * Miscellaneous Ubuntu changes + - [Config] Disable StarFive JH7100 support + - [Config] Disable Renesas RZ/Five support + - [Config] Disable BINFMT_FLAT for riscv64 + + -- Roxana Nicolescu Wed, 01 May 2024 16:02:05 +0200 + +linux (6.8.0-31.31) noble; urgency=medium + + * noble/linux: 6.8.0-31.31 -proposed tracker (LP: #2062933) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.04.04) + + -- Andrea Righi Fri, 19 Apr 2024 23:46:38 +0200 + +linux (6.8.0-30.30) noble; urgency=medium + + * noble/linux: 6.8.0-30.30 -proposed tracker (LP: #2061893) + + * System unstable, kernel ring buffer flooded with "BUG: Bad page state in + process swapper/0" (LP: #2056706) + - xen-netfront: Add missing skb_mark_for_recycle + + -- Andrea Righi Tue, 16 Apr 2024 21:17:11 +0200 + +linux (6.8.0-29.29) noble; urgency=medium + + * noble/linux: 6.8.0-29.29 -proposed tracker (LP: #2061888) + + * [24.04 FEAT] [SEC2353] zcrypt: extend error recovery to deal with device + scans (LP: #2050019) + - s390/zcrypt: harmonize debug feature calls and defines + - s390/zcrypt: introduce dynamic debugging for AP and zcrypt code + - s390/pkey: harmonize pkey s390 debug feature calls + - s390/pkey: introduce dynamic debugging for pkey + - s390/ap: add debug possibility for AP messages + - s390/zcrypt: add debug possibility for CCA and EP11 messages + - s390/ap: rearm APQNs bindings complete completion + - s390/ap: clarify AP scan bus related functions and variables + - s390/ap: rework ap_scan_bus() to return true on config change + - s390/ap: introduce mutex to lock the AP bus scan + - s390/zcrypt: introduce retries on in-kernel send CPRB functions + - s390/zcrypt: improve zcrypt retry behavior + - s390/pkey: improve pkey retry behavior + + * [24.04 FEAT] Memory hotplug vmem pages (s390x) (LP: #2051835) + - mm/memory_hotplug: introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers + - s390/mm: allocate vmemmap pages from self-contained memory range + - s390/sclp: remove unhandled memory notifier type + - s390/mm: implement MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers + - s390: enable MHP_MEMMAP_ON_MEMORY + - [Config] enable CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE and + CONFIG_MHP_MEMMAP_ON_MEMORY for s390x + + -- Paolo Pisati Tue, 16 Apr 2024 20:32:09 +0200 + +linux (6.8.0-28.28) noble; urgency=medium + + * noble/linux: 6.8.0-28.28 -proposed tracker (LP: #2061867) + + * linux-gcp 6.8.0-1005.5 (+ others) Noble kernel regression iwth new apparmor + profiles/features (LP: #2061851) + - SAUCE: apparmor4.0.0 [92/90]: fix address mapping for recvfrom + + -- Paolo Pisati Tue, 16 Apr 2024 18:29:17 +0200 + +linux (6.8.0-25.25) noble; urgency=medium + + * noble/linux: 6.8.0-25.25 -proposed tracker (LP: #2061083) + + * Packaging resync (LP: #1786013) + - [Packaging] debian.master/dkms-versions -- update from kernel-versions + (main/d2024.04.04) + + * Apply mitigations for the native BHI hardware vulnerabilty (LP: #2060909) + - x86/cpufeatures: Add new word for scattered features + - x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file + - x86/syscall: Don't force use of indirect calls for system calls + - x86/bhi: Add support for clearing branch history at syscall entry + - x86/bhi: Define SPEC_CTRL_BHI_DIS_S + - x86/bhi: Enumerate Branch History Injection (BHI) bug + - x86/bhi: Add BHI mitigation knob + - x86/bhi: Mitigate KVM by default + - KVM: x86: Add BHI_NO + - x86: set SPECTRE_BHI_ON as default + - [Config] enable spectre_bhi=auto by default + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/90]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/90]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/90]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/90]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/90]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/90]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/90]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/90]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/90]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/90]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/90]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/90]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/90]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/90]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/90]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/90]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/90]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/90]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/90]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/90]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/90]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/90]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/90]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/90]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/90]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/90]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/90]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/90]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/90]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [31/90]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/90]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/90]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/90]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/90]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/90]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/90]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/90]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/90]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/90]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/90]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/90]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [43/90]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/90]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/90]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/90]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/90]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/90]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/90]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/90]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/90]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/90]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/90]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/90]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/90]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/90]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/90]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/90]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/90]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/90]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/90]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/90]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/90]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/90]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/90] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/90]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/90]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/90]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/90]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/90]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/90]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/90]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/90]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/90]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/90]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/90]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/90]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/90]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/90]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/90]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/90]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/90]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/90]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/90]: fixup notify + - SAUCE: apparmor4.0.0 [88/90]: apparmor: add fine grained ipv4/ipv6 mediation + - SAUCE: apparmor4.0.0 [89/90]:apparmor: disable tailglob responses for now + - SAUCE: apparmor4.0.0 [90/90]: apparmor: Fix notify build warnings + - SAUCE: apparmor4.0.0: fix reserved mem for when we save ipv6 addresses + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/90]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/90]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/90]: userns - make it so special unconfined + profiles can mediate user namespaces + + * [MTL] x86: Fix Cache info sysfs is not populated (LP: #2049793) + - SAUCE: cacheinfo: Check for null last-level cache info + - SAUCE: cacheinfo: Allocate memory for memory if not done from the primary + CPU + - SAUCE: x86/cacheinfo: Delete global num_cache_leaves + - SAUCE: x86/cacheinfo: Clean out init_cache_level() + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0: LSM stacking v39: fix build error with + CONFIG_SECURITY=n + - [Config] toolchain version update + + -- Paolo Pisati Fri, 12 Apr 2024 10:42:33 +0200 + +linux (6.8.0-22.22) noble; urgency=medium + + * noble/linux: 6.8.0-22.22 -proposed tracker (LP: #2060238) + + -- Andrea Righi Thu, 04 Apr 2024 23:00:49 +0200 + +linux (6.8.0-21.21) noble; urgency=medium + + * noble/linux: 6.8.0-21.21 -proposed tracker (LP: #2060225) + + * Miscellaneous Ubuntu changes + - [Config] update toolchain version in annotations + + -- Andrea Righi Thu, 04 Apr 2024 22:20:27 +0200 + +linux (6.8.0-20.20) noble; urgency=medium + + * noble/linux: 6.8.0-20.20 -proposed tracker (LP: #2058221) + + * Noble update: v6.8.1 upstream stable release (LP: #2058224) + - x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set + - Documentation/hw-vuln: Add documentation for RFDS + - x86/rfds: Mitigate Register File Data Sampling (RFDS) + - KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests + - Linux 6.8.1 + + * Autopkgtest failures on amd64 (LP: #2048768) + - [Packaging] update to clang-18 + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0: LSM stacking v39: fix build error with + CONFIG_SECURITY=n + - [Config] amd64: MITIGATION_RFDS=y + + -- Paolo Pisati Mon, 18 Mar 2024 11:08:14 +0100 + +linux (6.8.0-19.19) noble; urgency=medium + + * noble/linux: 6.8.0-19.19 -proposed tracker (LP: #2057910) + + * Miscellaneous Ubuntu changes + - [Packaging] re-introduce linux-doc as an empty package + + -- Paolo Pisati Thu, 14 Mar 2024 14:36:14 +0100 + +linux (6.8.0-18.18) noble; urgency=medium + + * noble/linux: 6.8.0-18.18 -proposed tracker (LP: #2057456) + + * Miscellaneous Ubuntu changes + - [Packaging] drop dependency on libclang-17 + + -- Paolo Pisati Tue, 12 Mar 2024 14:44:13 +0100 + +linux (6.8.0-17.17) noble; urgency=medium + + * noble/linux: 6.8.0-17.17 -proposed tracker (LP: #2056745) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Add debian/control sanity check" + + -- Paolo Pisati Mon, 11 Mar 2024 12:46:38 +0100 + +linux (6.8.0-16.16) noble; urgency=medium + + * noble/linux: 6.8.0-16.16 -proposed tracker (LP: #2056738) + + * left-over ceph debugging printks (LP: #2056616) + - Revert "UBUNTU: SAUCE: ceph: make sure all the files successfully put before + unmounting" + + * qat: Improve error recovery flows (LP: #2056354) + - crypto: qat - add heartbeat error simulator + - crypto: qat - disable arbitration before reset + - crypto: qat - update PFVF protocol for recovery + - crypto: qat - re-enable sriov after pf reset + - crypto: qat - add fatal error notification + - crypto: qat - add auto reset on error + - crypto: qat - limit heartbeat notifications + - crypto: qat - improve aer error reset handling + - crypto: qat - change SLAs cleanup flow at shutdown + - crypto: qat - resolve race condition during AER recovery + - Documentation: qat: fix auto_reset section + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/87]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/87]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/87]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/87]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/87]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/87]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/87]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/87]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/87]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/87]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/87]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/87]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/87]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/87]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/87]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/87]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/87]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/87]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/87]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/87]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/87]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/87]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/87]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/87]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/87]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/87]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/87]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/87]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/87]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [31/87]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/87]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/87]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/87]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/87]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/87]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/87]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/87]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/87]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/87]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/87]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/87]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [43/87]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/87]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/87]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/87]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/87]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/87]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/87]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/87]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/87]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/87]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/87]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/87]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/87]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/87]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/87]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/87]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/87]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/87]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/87]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/87]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/87]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/87]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/87] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/87]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/87]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/87]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/87]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/87]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/87]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/87]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/87]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/87]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/87]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/87]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/87]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/87]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/87]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/87]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/87]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/87]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/87]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/87]: fixup notify + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/87]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/87]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/87]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Enable lowlatency settings in the generic kernel (LP: #2051342) + - [Config] enable low-latency settings + + * hwmon: (coretemp) Fix core count limitation (LP: #2056126) + - hwmon: (coretemp) Introduce enum for attr index + - hwmon: (coretemp) Remove unnecessary dependency of array index + - hwmon: (coretemp) Replace sensor_device_attribute with device_attribute + - hwmon: (coretemp) Remove redundant pdata->cpu_map[] + - hwmon: (coretemp) Abstract core_temp helpers + - hwmon: (coretemp) Split package temp_data and core temp_data + - hwmon: (coretemp) Remove redundant temp_data->is_pkg_data + - hwmon: (coretemp) Use dynamic allocated memory for core temp_data + + * Miscellaneous Ubuntu changes + - [Config] Disable CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION + - [Packaging] remove debian/scripts/misc/arch-has-odm-enabled.sh + - rebase on v6.8 + - [Config] toolchain version update + + * Miscellaneous upstream changes + - crypto: qat - add fatal error notify method + + * Rebase on v6.8 + + -- Paolo Pisati Mon, 11 Mar 2024 10:14:10 +0100 + +linux (6.8.0-15.15) noble; urgency=medium + + * noble/linux: 6.8.0-15.15 -proposed tracker (LP: #2055871) + + * Miscellaneous Ubuntu changes + - rebase on v6.8-rc7 + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Transition laptop-23.10 to generic" + + * Rebase on v6.8-rc7 + + -- Paolo Pisati Mon, 04 Mar 2024 11:50:51 +0100 + +linux (6.8.0-14.14) noble; urgency=medium + + * noble/linux: 6.8.0-14.14 -proposed tracker (LP: #2055551) + + * Please change CONFIG_CONSOLE_LOGLEVEL_QUIET to 3 (LP: #2049390) + - [Config] reduce verbosity when booting in quiet mode + + * linux: please move erofs.ko (CONFIG_EROFS for EROFS support) from linux- + modules-extra to linux-modules (LP: #2054809) + - UBUNTU [Packaging]: Include erofs in linux-modules instead of linux-modules- + extra + + * linux: please move dmi-sysfs.ko (CONFIG_DMI_SYSFS for SMBIOS support) from + linux-modules-extra to linux-modules (LP: #2045561) + - [Packaging] Move dmi-sysfs.ko into linux-modules + + * Enable CONFIG_INTEL_IOMMU_DEFAULT_ON and + CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON (LP: #1951440) + - [Config] enable Intel DMA remapping by default + + * disable Intel DMA remapping by default (LP: #1971699) + - [Config] update tracking bug for CONFIG_INTEL_IOMMU_DEFAULT_ON + + * Packaging resync (LP: #1786013) + - debian.master/dkms-versions -- update from kernel-versions + (main/d2024.02.29) + + * Miscellaneous Ubuntu changes + - SAUCE: modpost: Replace 0-length array with flex-array member + - [packaging] do not include debian/ directory in a binary package + - [packaging] remove debian/stamps/keep-dir + + -- Paolo Pisati Fri, 01 Mar 2024 11:45:12 +0100 + +linux (6.8.0-13.13) noble; urgency=medium + + * noble/linux: 6.8.0-13.13 -proposed tracker (LP: #2055421) + + * Packaging resync (LP: #1786013) + - debian.master/dkms-versions -- update from kernel-versions + (main/d2024.02.29) + + * Miscellaneous Ubuntu changes + - rebase on v6.8-rc6 + - [Config] updateconfifs following v6.8-rc6 rebase + + * Rebase on v6.8-rc6 + + -- Paolo Pisati Thu, 29 Feb 2024 15:02:24 +0100 + +linux (6.8.0-12.12) noble; urgency=medium + + * linux-tools-common: man page of usbip[d] is misplaced (LP: #2054094) + - [Packaging] rules: Put usbip manpages in the correct directory + + * Validate connection interval to pass Bluetooth Test Suite (LP: #2052005) + - Bluetooth: Enforce validation on max value of connection interval + + * Turning COMPAT_32BIT_TIME off on s390x (LP: #2038583) + - [Config] Turn off 31-bit COMPAT on s390x + + * Don't produce linux-source binary package (LP: #2043994) + - [Packaging] Add debian/control sanity check + + * Don't produce linux-*-source- package (LP: #2052439) + - [Packaging] Move linux-source package stub to debian/control.d + - [Packaging] Build linux-source package only for the main kernel + + * Don't produce linux-*-cloud-tools-common, linux-*-tools-common and + linux-*-tools-host binary packages (LP: #2048183) + - [Packaging] Move indep tools package stubs to debian/control.d + - [Packaging] Build indep tools packages only for the main kernel + + * Enable CONFIG_INTEL_IOMMU_DEFAULT_ON and + CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON (LP: #1951440) + - [Config] enable Intel DMA remapping by default + + * disable Intel DMA remapping by default (LP: #1971699) + - [Config] update tracking bug for CONFIG_INTEL_IOMMU_DEFAULT_ON + + * Miscellaneous Ubuntu changes + - [Packaging] Transition laptop-23.10 to generic + + -- Paolo Pisati Thu, 22 Feb 2024 14:31:00 +0100 + +linux (6.8.0-11.11) noble; urgency=medium + + * noble/linux: 6.8.0-11.11 -proposed tracker (LP: #2053094) + + * Miscellaneous Ubuntu changes + - [Packaging] riscv64: disable building unnecessary binary debs + + -- Paolo Pisati Wed, 14 Feb 2024 00:04:31 +0100 + +linux (6.8.0-10.10) noble; urgency=medium + + * noble/linux: 6.8.0-10.10 -proposed tracker (LP: #2053015) + + * Miscellaneous Ubuntu changes + - [Packaging] add Rust build-deps for riscv64 + + * Miscellaneous upstream changes + - Revert "Revert "UBUNTU: [Packaging] temporarily disable Rust dependencies on + riscv64"" + + -- Paolo Pisati Tue, 13 Feb 2024 13:23:47 +0100 + +linux (6.8.0-9.9) noble; urgency=medium + + * noble/linux: 6.8.0-9.9 -proposed tracker (LP: #2052945) + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] temporarily disable Rust dependencies on + riscv64" + + -- Paolo Pisati Mon, 12 Feb 2024 15:49:20 +0100 + +linux (6.8.0-8.8) noble; urgency=medium + + * noble/linux: 6.8.0-8.8 -proposed tracker (LP: #2052918) + + * Miscellaneous Ubuntu changes + - [Packaging] riscv64: enable linux-libc-dev build + - v6.8-rc4 rebase + + * Rebase on v6.8-rc4 + + -- Paolo Pisati Mon, 12 Feb 2024 10:13:34 +0100 + +linux (6.8.0-7.7) noble; urgency=medium + + * noble/linux: 6.8.0-7.7 -proposed tracker (LP: #2052691) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/87]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/87]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/87]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/87]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/87]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/87]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/87]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/87]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/87]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/87]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/87]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/87]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/87]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/87]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/87]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/87]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/87]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/87]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/87]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/87]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/87]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/87]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/87]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/87]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/87]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/87]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/87]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/87]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/87]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [31/87]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/87]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/87]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/87]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/87]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/87]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/87]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/87]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/87]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/87]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/87]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/87]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [43/87]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/87]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/87]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/87]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/87]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/87]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/87]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/87]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/87]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/87]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/87]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/87]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/87]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/87]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/87]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/87]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/87]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/87]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/87]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/87]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/87]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/87]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [65/87] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [69/87]: add io_uring mediation + - SAUCE: apparmor4.0.0 [70/87]: apparmor: fix oops when racing to retrieve + notification + - SAUCE: apparmor4.0.0 [71/87]: apparmor: fix notification header size + - SAUCE: apparmor4.0.0 [72/87]: apparmor: fix request field from a prompt + reply that denies all access + - SAUCE: apparmor4.0.0 [73/87]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + - SAUCE: apparmor4.0.0 [74/87]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/87]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/87]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/87]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/87]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/87]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/87]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/87]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/87]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/87]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/87]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/87]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/87]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/87]: fixup notify + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/87]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/87]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/87]: userns - make it so special unconfined + profiles can mediate user namespaces + + -- Paolo Pisati Thu, 08 Feb 2024 12:05:44 +0100 + +linux (6.8.0-6.6) noble; urgency=medium + + * noble/linux: 6.8.0-6.6 -proposed tracker (LP: #2052592) + + * Packaging resync (LP: #1786013) + - debian.master/dkms-versions -- update from kernel-versions + (main/d2024.02.07) + - [Packaging] update variants + + * FIPS kernels should default to fips mode (LP: #2049082) + - SAUCE: Enable fips mode by default, in FIPS kernels only + + * Fix snapcraftyaml.yaml for jammy:linux-raspi (LP: #2051468) + - [Packaging] Remove old snapcraft.yaml + + * Azure: Fix regression introduced in LP: #2045069 (LP: #2052453) + - hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed + + * Miscellaneous Ubuntu changes + - [Packaging] Remove in-tree abi checks + - [Packaging] drop abi files with clean + - [Packaging] Remove do_full_source variable (fixup) + - [Packaging] Remove update-dkms-versions and move dkms-versions + - [Config] updateconfigs following v6.8-rc3 rebase + - [packaging] rename to linux + - [packaging] rebase on v6.8-rc3 + - [packaging] disable signing for ppc64el + + * Rebase on v6.8-rc3 + + -- Paolo Pisati Wed, 07 Feb 2024 15:13:52 +0100 + +linux (6.8.0-5.5) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-5.5 -proposed tracker (LP: #2052136) + + * Miscellaneous upstream changes + - Revert "mm/sparsemem: fix race in accessing memory_section->usage" + + -- Paolo Pisati Fri, 02 Feb 2024 12:59:09 +0100 + +linux-unstable (6.8.0-4.4) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-4.4 -proposed tracker (LP: #2051502) + + * Migrate from fbdev drivers to simpledrm and DRM fbdev emulation layer + (LP: #1965303) + - [Config] enable simpledrm and DRM fbdev emulation layer + + * Miscellaneous Ubuntu changes + - [Config] toolchain update + + * Miscellaneous upstream changes + - rust: upgrade to Rust 1.75.0 + + -- Paolo Pisati Mon, 29 Jan 2024 14:49:49 +0100 + +linux-unstable (6.8.0-3.3) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-3.3 -proposed tracker (LP: #2051488) + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [43/87]: LSM stacking v39: UBUNTU: SAUCE: apparmor4.0.0 + [12/95]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [44/87]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [45/87]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [46/87]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [47/87]: af_unix mediation + - SAUCE: apparmor4.0.0 [48/87]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [49/87]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [50/87]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/87]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/87]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/87]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [54/87]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [55/87]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [56/87]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [57/87]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [58/87]: prompt - fix caching + - SAUCE: apparmor4.0.0 [59/87]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [60/87]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [61/87]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [62/87]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [63/87]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [64/87]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [69/87]: add io_uring mediation + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * apparmor restricts read access of user namespace mediation sysctls to root + (LP: #2040194) + - SAUCE: apparmor4.0.0 [73/87]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + + * AppArmor spams kernel log with assert when auditing (LP: #2040192) + - SAUCE: apparmor4.0.0 [72/87]: apparmor: fix request field from a prompt + reply that denies all access + + * apparmor notification files verification (LP: #2040250) + - SAUCE: apparmor4.0.0 [71/87]: apparmor: fix notification header size + + * apparmor oops when racing to retrieve a notification (LP: #2040245) + - SAUCE: apparmor4.0.0 [70/87]: apparmor: fix oops when racing to retrieve + notification + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [66/87]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [67/87]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [68/87]: userns - make it so special unconfined + profiles can mediate user namespaces + + * Miscellaneous Ubuntu changes + - SAUCE: apparmor4.0.0 [01/87]: LSM stacking v39: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [02/87]: LSM stacking v39: SM: Infrastructure + management of the sock security + - SAUCE: apparmor4.0.0 [03/87]: LSM stacking v39: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [04/87]: LSM stacking v39: IMA: avoid label collisions + with stacked LSMs + - SAUCE: apparmor4.0.0 [05/87]: LSM stacking v39: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [06/87]: LSM stacking v39: LSM: Add lsmblob_to_secctx + hook + - SAUCE: apparmor4.0.0 [07/87]: LSM stacking v39: Audit: maintain an lsmblob + in audit_context + - SAUCE: apparmor4.0.0 [08/87]: LSM stacking v39: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [09/87]: LSM stacking v39: Audit: Update shutdown LSM + data + - SAUCE: apparmor4.0.0 [10/87]: LSM stacking v39: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [11/87]: LSM stacking v39: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [12/87]: LSM stacking v39: Audit: use an lsmblob in + audit_names + - SAUCE: apparmor4.0.0 [13/87]: LSM stacking v39: LSM: Create new + security_cred_getlsmblob LSM hook + - SAUCE: apparmor4.0.0 [14/87]: LSM stacking v39: Audit: Change context data + from secid to lsmblob + - SAUCE: apparmor4.0.0 [15/87]: LSM stacking v39: Netlabel: Use lsmblob for + audit data + - SAUCE: apparmor4.0.0 [16/87]: LSM stacking v39: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [17/87]: LSM stacking v39: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [18/87]: LSM stacking v39: LSM: Use lsmcontext in + security_lsmblob_to_secctx + - SAUCE: apparmor4.0.0 [19/87]: LSM stacking v39: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [20/87]: LSM stacking v39: LSM: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [21/87]: LSM stacking v39: LSM: + security_lsmblob_to_secctx module selection + - SAUCE: apparmor4.0.0 [22/87]: LSM stacking v39: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [23/87]: LSM stacking v39: Audit: Allow multiple + records in an audit_buffer + - SAUCE: apparmor4.0.0 [24/87]: LSM stacking v39: Audit: Add record for + multiple task security contexts + - SAUCE: apparmor4.0.0 [25/87]: LSM stacking v39: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [26/87]: LSM stacking v39: Audit: Add record for + multiple object contexts + - SAUCE: apparmor4.0.0 [27/87]: LSM stacking v39: LSM: Remove unused + lsmcontext_init() + - SAUCE: apparmor4.0.0 [28/87]: LSM stacking v39: LSM: Improve logic in + security_getprocattr + - SAUCE: apparmor4.0.0 [29/87]: LSM stacking v39: LSM: secctx provider check + on release + - SAUCE: apparmor4.0.0 [30/87]: LSM stacking v39: LSM: Single calls in + socket_getpeersec hooks + - SAUCE: apparmor4.0.0 [31/87]: LSM stacking v39: LSM: Exclusive secmark usage + - SAUCE: apparmor4.0.0 [32/87]: LSM stacking v39: LSM: Identify which LSM + handles the context string + - SAUCE: apparmor4.0.0 [33/87]: LSM stacking v39: AppArmor: Remove the + exclusive flag + - SAUCE: apparmor4.0.0 [34/87]: LSM stacking v39: LSM: Add mount opts blob + size tracking + - SAUCE: apparmor4.0.0 [35/87]: LSM stacking v39: LSM: allocate mnt_opts blobs + instead of module specific data + - SAUCE: apparmor4.0.0 [36/87]: LSM stacking v39: LSM: Infrastructure + management of the key security blob + - SAUCE: apparmor4.0.0 [37/87]: LSM stacking v39: LSM: Infrastructure + management of the mnt_opts security blob + - SAUCE: apparmor4.0.0 [38/87]: LSM stacking v39: LSM: Correct handling of + ENOSYS in inode_setxattr + - SAUCE: apparmor4.0.0 [39/87]: LSM stacking v39: LSM: Remove lsmblob + scaffolding + - SAUCE: apparmor4.0.0 [40/87]: LSM stacking v39: LSM: Allow reservation of + netlabel + - SAUCE: apparmor4.0.0 [41/87]: LSM stacking v39: LSM: restrict + security_cred_getsecid() to a single LSM + - SAUCE: apparmor4.0.0 [42/87]: LSM stacking v39: Smack: Remove + LSM_FLAG_EXCLUSIVE + - SAUCE: apparmor4.0.0 [65/87] v6.8 prompt:fixup interruptible + - SAUCE: apparmor4.0.0 [74/87]: apparmor: cleanup attachment perm lookup to + use lookup_perms() + - SAUCE: apparmor4.0.0 [75/87]: apparmor: remove redundant unconfined check. + - SAUCE: apparmor4.0.0 [76/87]: apparmor: switch signal mediation to using + RULE_MEDIATES + - SAUCE: apparmor4.0.0 [77/87]: apparmor: ensure labels with more than one + entry have correct flags + - SAUCE: apparmor4.0.0 [78/87]: apparmor: remove explicit restriction that + unconfined cannot use change_hat + - SAUCE: apparmor4.0.0 [79/87]: apparmor: cleanup: refactor file_perm() to + provide semantics of some checks + - SAUCE: apparmor4.0.0 [80/87]: apparmor: carry mediation check on label + - SAUCE: apparmor4.0.0 [81/87]: apparmor: convert easy uses of unconfined() to + label_mediates() + - SAUCE: apparmor4.0.0 [82/87]: apparmor: add additional flags to extended + permission. + - SAUCE: apparmor4.0.0 [83/87]: apparmor: add support for profiles to define + the kill signal + - SAUCE: apparmor4.0.0 [84/87]: apparmor: fix x_table_lookup when stacking is + not the first entry + - SAUCE: apparmor4.0.0 [85/87]: apparmor: allow profile to be transitioned + when a user ns is created + - SAUCE: apparmor4.0.0 [86/87]: apparmor: add ability to mediate caps with + policy state machine + - SAUCE: apparmor4.0.0 [87/87]: fixup notify + - [Config] updateconfigs following v6.8-rc2 rebase + + -- Paolo Pisati Mon, 29 Jan 2024 08:59:32 +0100 + +linux-unstable (6.8.0-2.2) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-2.2 -proposed tracker (LP: #2051110) + + * Miscellaneous Ubuntu changes + - [Config] toolchain update + - [Config] enable Rust + + -- Paolo Pisati Wed, 24 Jan 2024 13:10:07 +0100 + +linux-unstable (6.8.0-1.1) noble; urgency=medium + + * noble/linux-unstable: 6.8.0-1.1 -proposed tracker (LP: #2051102) + + * Miscellaneous Ubuntu changes + - [packaging] move to v6.8-rc1 + - [Config] updateconfigs following v6.8-rc1 rebase + - SAUCE: export file_close_fd() instead of close_fd_get_file() + - SAUCE: cpufreq: s/strlcpy/strscpy/ + - debian/dkms-versions -- temporarily disable zfs dkms + - debian/dkms-versions -- temporarily disable ipu6 and isvsc dkms + - debian/dkms-versions -- temporarily disable v4l2loopback + + -- Paolo Pisati Wed, 24 Jan 2024 10:48:37 +0100 + +linux-unstable (6.8.0-0.0) noble; urgency=medium + + * Empty entry. + + -- Paolo Pisati Tue, 23 Jan 2024 11:36:40 +0100 + +linux-unstable (6.7.0-7.7) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-7.7 -proposed tracker (LP: #2049357) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable signing for s390x and ppc64el + + -- Andrea Righi Mon, 15 Jan 2024 08:41:11 +0100 + +linux-unstable (6.7.0-6.6) noble; urgency=medium + + * Empty entry. + + -- Andrea Righi Mon, 15 Jan 2024 08:30:50 +0100 + +linux (6.7.0-2.2) noble; urgency=medium + + * noble/linux: 6.7.0-2.2 -proposed tracker (LP: #2049182) + + * Packaging resync (LP: #1786013) + - [Packaging] resync getabis + + * Enforce RETPOLINE and SLS mitigrations (LP: #2046440) + - SAUCE: objtool: Make objtool check actually fatal upon fatal errors + - SAUCE: objtool: make objtool SLS validation fatal when building with + CONFIG_SLS=y + - SAUCE: objtool: make objtool RETPOLINE validation fatal when building with + CONFIG_RETPOLINE=y + - SAUCE: scripts: remove generating .o-ur objects + - [Packaging] Remove all custom retpoline-extract code + - Revert "UBUNTU: SAUCE: vga_set_mode -- avoid jump tables" + - Revert "UBUNTU: SAUCE: early/late -- annotate indirect calls in early/late + initialisation code" + - Revert "UBUNTU: SAUCE: apm -- annotate indirect calls within + firmware_restrict_branch_speculation_{start,end}" + + * Miscellaneous Ubuntu changes + - [Packaging] temporarily disable riscv64 builds + - [Packaging] temporarily disable Rust dependencies on riscv64 + + -- Andrea Righi Fri, 12 Jan 2024 09:21:57 +0100 + +linux (6.7.0-1.1) noble; urgency=medium + + * noble/linux: 6.7.0-1.1 -proposed tracker (LP: #2048859) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/d2024.01.02) + + * [UBUNTU 23.04] Regression: Ubuntu 23.04/23.10 do not include uvdevice + anymore (LP: #2048919) + - [Config] Enable S390_UV_UAPI (built-in) + + * Support mipi camera on Intel Meteor Lake platform (LP: #2031412) + - SAUCE: iommu: intel-ipu: use IOMMU passthrough mode for Intel IPUs on Meteor + Lake + - SAUCE: platform/x86: int3472: Add handshake GPIO function + + * [SRU][J/L/M] UBUNTU: [Packaging] Make WWAN driver a loadable module + (LP: #2033406) + - [Packaging] Make WWAN driver loadable modules + + * usbip: error: failed to open /usr/share/hwdata//usb.ids (LP: #2039439) + - [Packaging] Make linux-tools-common depend on hwdata + + * [Mediatek] mt8195-demo: enable CONFIG_MTK_IOMMU as module for multimedia and + PCIE peripherals (LP: #2036587) + - [Config] Enable CONFIG_MTK_IOMMU on arm64 + + * linux-*: please enable dm-verity kconfigs to allow MoK/db verified root + images (LP: #2019040) + - [Config] CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y + + * kexec enable to load/kdump zstd compressed zimg (LP: #2037398) + - [Packaging] Revert arm64 image format to Image.gz + + * Mantic minimized/minimal cloud images do not receive IP address during + provisioning; systemd regression with wait-online (LP: #2036968) + - [Config] Enable virtio-net as built-in to avoid race + + * Make backlight module auto detect dell_uart_backlight (LP: #2008882) + - SAUCE: ACPI: video: Dell AIO UART backlight detection + + * Linux 6.2 fails to reboot with current u-boot-nezha (LP: #2021364) + - [Config] Default to performance CPUFreq governor on riscv64 + + * Enable Nezha board (LP: #1975592) + - [Config] Build in D1 clock drivers on riscv64 + - [Config] Enable CONFIG_SUN6I_RTC_CCU on riscv64 + - [Config] Enable CONFIG_SUNXI_WATCHDOG on riscv64 + - [Config] Disable SUN50I_DE2_BUS on riscv64 + - [Config] Disable unneeded sunxi pinctrl drivers on riscv64 + + * Enable StarFive VisionFive 2 board (LP: #2013232) + - [Config] Enable CONFIG_PINCTRL_STARFIVE_JH7110_SYS on riscv64 + - [Config] Enable CONFIG_STARFIVE_WATCHDOG on riscv64 + + * rcu_sched detected stalls on CPUs/tasks (LP: #1967130) + - [Config] Enable virtually mapped stacks on riscv64 + + * Check for changes relevant for security certifications (LP: #1945989) + - [Packaging] Add a new fips-checks script + + * Installation support for SMARC RZ/G2L platform (LP: #2030525) + - [Config] build Renesas RZ/G2L USBPHY control driver statically + + * Add support for kernels compiled with CONFIG_EFI_ZBOOT (LP: #2002226) + - [Config]: Turn on CONFIG_EFI_ZBOOT on ARM64 + + * Default module signing algo should be accelerated (LP: #2034061) + - [Config] Default module signing algo should be accelerated + + * Miscellaneous Ubuntu changes + - [Config] annotations clean-up + + [ Upstream Kernel Changes ] + + * Rebase to v6.7 + + -- Andrea Righi Thu, 11 Jan 2024 11:49:07 +0100 + +linux (6.7.0-0.0) noble; urgency=medium + + * Empty entry + + -- Andrea Righi Tue, 09 Jan 2024 09:27:23 +0100 + +linux-unstable (6.7.0-5.5) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-5.5 -proposed tracker (LP: #2048118) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/d2024.01.02) + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable Rust support + - [Packaging] temporarily disable riscv64 builds + + -- Andrea Righi Fri, 05 Jan 2024 12:33:10 +0100 + +linux-unstable (6.7.0-4.4) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-4.4 -proposed tracker (LP: #2047807) + + * unconfined profile denies userns_create for chromium based processes + (LP: #1990064) + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * apparmor restricts read access of user namespace mediation sysctls to root + (LP: #2040194) + - SAUCE: apparmor4.0.0 [69/69]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + + * AppArmor spams kernel log with assert when auditing (LP: #2040192) + - SAUCE: apparmor4.0.0 [68/69]: apparmor: fix request field from a prompt + reply that denies all access + + * apparmor notification files verification (LP: #2040250) + - SAUCE: apparmor4.0.0 [67/69]: apparmor: fix notification header size + + * apparmor oops when racing to retrieve a notification (LP: #2040245) + - SAUCE: apparmor4.0.0 [66/69]: apparmor: fix oops when racing to retrieve + notification + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/69]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [02/69]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [03/69]: add unpriviled user ns mediation + - SAUCE: apparmor4.0.0 [04/69]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [05/69]: af_unix mediation + - SAUCE: apparmor4.0.0 [06/69]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [07/69]: Stacking v38: LSM: Identify modules by more + than name + - SAUCE: apparmor4.0.0 [08/69]: Stacking v38: LSM: Add an LSM identifier for + external use + - SAUCE: apparmor4.0.0 [09/69]: Stacking v38: LSM: Identify the process + attributes for each module + - SAUCE: apparmor4.0.0 [10/69]: Stacking v38: LSM: Maintain a table of LSM + attribute data + - SAUCE: apparmor4.0.0 [11/69]: Stacking v38: proc: Use lsmids instead of lsm + names for attrs + - SAUCE: apparmor4.0.0 [12/69]: Stacking v38: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [13/69]: Stacking v38: LSM: Infrastructure management + of the sock security + - SAUCE: apparmor4.0.0 [14/69]: Stacking v38: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [15/69]: Stacking v38: LSM: provide lsm name and id + slot mappings + - SAUCE: apparmor4.0.0 [16/69]: Stacking v38: IMA: avoid label collisions with + stacked LSMs + - SAUCE: apparmor4.0.0 [17/69]: Stacking v38: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [18/69]: Stacking v38: LSM: Use lsmblob in + security_kernel_act_as + - SAUCE: apparmor4.0.0 [19/69]: Stacking v38: LSM: Use lsmblob in + security_secctx_to_secid + - SAUCE: apparmor4.0.0 [20/69]: Stacking v38: LSM: Use lsmblob in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [21/69]: Stacking v38: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [22/69]: Stacking v38: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [23/69]: Stacking v38: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [24/69]: Stacking v38: LSM: Use lsmblob in + security_cred_getsecid + - SAUCE: apparmor4.0.0 [25/69]: Stacking v38: LSM: Specify which LSM to + display + - SAUCE: apparmor4.0.0 [27/69]: Stacking v38: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [28/69]: Stacking v38: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [29/69]: Stacking v38: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [30/69]: Stacking v38: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [31/69]: Stacking v38: LSM: security_secid_to_secctx in + netlink netfilter + - SAUCE: apparmor4.0.0 [32/69]: Stacking v38: NET: Store LSM netlabel data in + a lsmblob + - SAUCE: apparmor4.0.0 [33/69]: Stacking v38: binder: Pass LSM identifier for + confirmation + - SAUCE: apparmor4.0.0 [34/69]: Stacking v38: LSM: security_secid_to_secctx + module selection + - SAUCE: apparmor4.0.0 [35/69]: Stacking v38: Audit: Keep multiple LSM data in + audit_names + - SAUCE: apparmor4.0.0 [36/69]: Stacking v38: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [37/69]: Stacking v38: LSM: Add a function to report + multiple LSMs + - SAUCE: apparmor4.0.0 [38/69]: Stacking v38: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor4.0.0 [39/69]: Stacking v38: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor4.0.0 [40/69]: Stacking v38: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [41/69]: Stacking v38: Audit: Add record for multiple + object contexts + - SAUCE: apparmor4.0.0 [42/69]: Stacking v38: netlabel: Use a struct lsmblob + in audit data + - SAUCE: apparmor4.0.0 [43/69]: Stacking v38: LSM: Removed scaffolding + function lsmcontext_init + - SAUCE: apparmor4.0.0 [44/69]: Stacking v38: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor4.0.0 [45/69]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [46/69]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [47/69]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [48/69]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [49/69]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [50/69]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [51/69]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [52/69]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [53/69]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [54/69]: prompt - fix caching + - SAUCE: apparmor4.0.0 [55/69]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [56/69]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [57/69]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [58/69]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [59/69]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [60/69]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [64/69]: advertise disconnected.path is available + - SAUCE: apparmor4.0.0 [65/69]: add io_uring mediation + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [61/69]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [62/69]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [63/69]: userns - make it so special unconfined + profiles can mediate user namespaces + + * udev fails to make prctl() syscall with apparmor=0 (as used by maas by + default) (LP: #2016908) // update apparmor and LSM stacking patch set + (LP: #2028253) + - SAUCE: apparmor4.0.0 [26/69]: Stacking v38: Fix prctl() syscall with + apparmor=0 + + * Fix RPL-U CPU C-state always keep at C3 when system run PHM with idle screen + on (LP: #2042385) + - SAUCE: r8169: Add quirks to enable ASPM on Dell platforms + + * [Debian] autoreconstruct - Do not generate chmod -x for deleted files + (LP: #2045562) + - [Debian] autoreconstruct - Do not generate chmod -x for deleted files + + * Disable Legacy TIOCSTI (LP: #2046192) + - [Config]: disable CONFIG_LEGACY_TIOCSTI + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] remove helper scripts + - [Packaging] update annotations scripts + + * Miscellaneous Ubuntu changes + - [Packaging] rules: Remove unused dkms make variables + - [Config] update annotations after rebase to v6.7-rc8 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc8 + + -- Andrea Righi Tue, 02 Jan 2024 14:57:21 +0100 + +linux-unstable (6.7.0-3.3) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-3.3 -proposed tracker (LP: #2046060) + + * enable CONFIG_INTEL_TDX_HOST in linux >= 6.7 for noble (LP: #2046040) + - [Config] enable CONFIG_INTEL_TDX_HOST + + * linux tools packages for derived kernels refuse to install simultaneously + due to libcpupower name collision (LP: #2035971) + - [Packaging] Statically link libcpupower into cpupower tool + + * make lazy RCU a boot time option (LP: #2045492) + - SAUCE: rcu: Provide a boot time parameter to control lazy RCU + + * Build failure if run in a console (LP: #2044512) + - [Packaging] Fix kernel module compression failures + + * Turning COMPAT_32BIT_TIME off on arm64 (64k & derivatives) (LP: #2038582) + - [Config] y2038: Turn off COMPAT and COMPAT_32BIT_TIME on arm64 64k + + * Turning COMPAT_32BIT_TIME off on riscv64 (LP: #2038584) + - [Config] y2038: Disable COMPAT_32BIT_TIME on riscv64 + + * Turning COMPAT_32BIT_TIME off on ppc64el (LP: #2038587) + - [Config] y2038: Disable COMPAT and COMPAT_32BIT_TIME on ppc64le + + * [UBUNTU 23.04] Kernel config option missing for s390x PCI passthrough + (LP: #2042853) + - [Config] CONFIG_VFIO_PCI_ZDEV_KVM=y + + * back-out zstd module compression automatic for backports (LP: #2045593) + - [Packaging] make ZSTD module compression conditional + + * Miscellaneous Ubuntu changes + - [Packaging] Remove do_full_source variable + - [Packaging] Remove obsolete config handling + - [Packaging] Remove support for sub-flavors + - [Packaging] Remove old linux-libc-dev version hack + - [Packaging] Remove obsolete scripts + - [Packaging] Remove README.inclusion-list + - [Packaging] make $(stampdir)/stamp-build-perarch depend on build-arch + - [Packaging] Enable rootless builds + - [Packaging] Allow to run debian/rules without (fake)root + - [Packaging] remove unneeded trailing slash for INSTALL_MOD_PATH + - [Packaging] override KERNELRELEASE instead of KERNELVERSION + - [Config] update toolchain versions in annotations + - [Packaging] drop useless linux-doc + - [Packaging] scripts: Rewrite insert-ubuntu-changes in Python + - [Packaging] enable riscv64 builds + - [Packaging] remove the last sub-flavours bit + - [Packaging] check debian.env to determine do_libc_dev_package + - [Packaging] remove debian.*/variants + - [Packaging] remove do_libc_dev_package variable + - [Packaging] move linux-libc-dev.stub to debian/control.d/ + - [Packaging] Update check to build linux-libc-dev to the source package name + - [Packaging] rules: Remove startnewrelease target + - [Packaging] Remove debian/commit-templates + - [Config] update annotations after rebase to v6.7-rc4 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc4 + + -- Andrea Righi Mon, 11 Dec 2023 15:56:11 +0100 + +linux-unstable (6.7.0-2.2) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-2.2 -proposed tracker (LP: #2045107) + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable Rust + - [Config] enable Rust in annotations + - [Packaging] Remove do_enforce_all variable + - [Config] disable Softlogic 6x10 capture card driver on armhf + - [Packaging] disable Rust support + - [Config] update annotations after rebase to v6.7-rc3 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc3 + + -- Andrea Righi Wed, 29 Nov 2023 07:51:17 +0100 + +linux-unstable (6.7.0-1.1) noble; urgency=medium + + * noble/linux-unstable: 6.7.0-1.1 -proposed tracker (LP: #2044069) + + * Packaging resync (LP: #1786013) + - [Packaging] update annotations scripts + - [Packaging] update helper scripts + + * Miscellaneous Ubuntu changes + - [Config] update annotations after rebase to v6.7-rc2 + + [ Upstream Kernel Changes ] + + * Rebase to v6.7-rc2 + + -- Andrea Righi Tue, 21 Nov 2023 10:45:24 +0100 + +linux-unstable (6.7.0-0.0) noble; urgency=medium + + * Empty entry + + -- Andrea Righi Tue, 21 Nov 2023 07:26:46 +0100 + +linux-unstable (6.6.0-12.12) noble; urgency=medium + + * noble/linux-unstable: 6.6.0-12.12 -proposed tracker (LP: #2043664) + + * Miscellaneous Ubuntu changes + - [Packaging] temporarily disable zfs dkms + + -- Paolo Pisati Thu, 16 Nov 2023 10:20:26 +0100 + +linux-unstable (6.6.0-11.11) noble; urgency=medium + + * noble/linux-unstable: 6.6.0-11.11 -proposed tracker (LP: #2043480) + + * Packaging resync (LP: #1786013) + - [Packaging] resync git-ubuntu-log + - [Packaging] resync update-dkms-versions helper + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/d2023.11.14) + + * Miscellaneous Ubuntu changes + - [Packaging] move to Noble + - [Config] toolchain version update + + -- Paolo Pisati Wed, 15 Nov 2023 14:50:40 +0100 + +linux-unstable (6.6.0-10.10) noble; urgency=medium + + * mantic/linux-unstable: 6.6.0-10.10 -proposed tracker (LP: #2043088) + + * Bump arm64's CONFIG_NR_CPUS to 512 (LP: #2042897) + - [Config] Bump CONFIG_NR_CPUS to 512 for arm64 + + * Miscellaneous Ubuntu changes + - [Config] Include a note for the NR_CPUS setting on riscv64 + - SAUCE: apparmor4.0.0 [83/83]: Fix inode_init for changed prototype + + -- Paolo Pisati Thu, 09 Nov 2023 12:05:11 +0200 + +linux-unstable (6.6.0-9.9) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-9.9 -proposed tracker (LP: #2041852) + + * Switch IMA default hash to sha256 (LP: #2041735) + - [Config] Switch IMA_DEFAULT_HASH from sha1 to sha256 + + * apparmor restricts read access of user namespace mediation sysctls to root + (LP: #2040194) + - SAUCE: apparmor4.0.0 [82/82]: apparmor: open userns related sysctl so lxc + can check if restriction are in place + + * AppArmor spams kernel log with assert when auditing (LP: #2040192) + - SAUCE: apparmor4.0.0 [81/82]: apparmor: fix request field from a prompt + reply that denies all access + + * apparmor notification files verification (LP: #2040250) + - SAUCE: apparmor4.0.0 [80/82]: apparmor: fix notification header size + + * apparmor oops when racing to retrieve a notification (LP: #2040245) + - SAUCE: apparmor4.0.0 [79/82]: apparmor: fix oops when racing to retrieve + notification + + * Disable restricting unprivileged change_profile by default, due to LXD + latest/stable not yet compatible with this new apparmor feature + (LP: #2038567) + - SAUCE: apparmor4.0.0 [78/82]: apparmor: Make + apparmor_restrict_unprivileged_unconfined opt-in + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [01/82]: add/use fns to print hash string hex value + - SAUCE: apparmor4.0.0 [02/82]: rename SK_CTX() to aa_sock and make it an + inline fn + - SAUCE: apparmor4.0.0 [03/82]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor4.0.0 [04/82]: add user namespace creation mediation + - SAUCE: apparmor4.0.0 [05/82]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor4.0.0 [06/82]: af_unix mediation + - SAUCE: apparmor4.0.0 [07/82]: Add fine grained mediation of posix mqueues + - SAUCE: apparmor4.0.0 [08/82]: Stacking v38: LSM: Identify modules by more + than name + - SAUCE: apparmor4.0.0 [09/82]: Stacking v38: LSM: Add an LSM identifier for + external use + - SAUCE: apparmor4.0.0 [10/82]: Stacking v38: LSM: Identify the process + attributes for each module + - SAUCE: apparmor4.0.0 [11/82]: Stacking v38: LSM: Maintain a table of LSM + attribute data + - SAUCE: apparmor4.0.0 [12/82]: Stacking v38: proc: Use lsmids instead of lsm + names for attrs + - SAUCE: apparmor4.0.0 [13/82]: Stacking v38: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor4.0.0 [14/82]: Stacking v38: LSM: Infrastructure management + of the sock security + - SAUCE: apparmor4.0.0 [15/82]: Stacking v38: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor4.0.0 [16/82]: Stacking v38: LSM: provide lsm name and id + slot mappings + - SAUCE: apparmor4.0.0 [17/82]: Stacking v38: IMA: avoid label collisions with + stacked LSMs + - SAUCE: apparmor4.0.0 [18/82]: Stacking v38: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor4.0.0 [19/82]: Stacking v38: LSM: Use lsmblob in + security_kernel_act_as + - SAUCE: apparmor4.0.0 [20/82]: Stacking v38: LSM: Use lsmblob in + security_secctx_to_secid + - SAUCE: apparmor4.0.0 [21/82]: Stacking v38: LSM: Use lsmblob in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [22/82]: Stacking v38: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor4.0.0 [23/82]: Stacking v38: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor4.0.0 [24/82]: Stacking v38: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor4.0.0 [25/82]: Stacking v38: LSM: Use lsmblob in + security_cred_getsecid + - SAUCE: apparmor4.0.0 [26/82]: Stacking v38: LSM: Specify which LSM to + display + - SAUCE: apparmor4.0.0 [28/82]: Stacking v38: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor4.0.0 [29/82]: Stacking v38: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor4.0.0 [30/82]: Stacking v38: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor4.0.0 [31/82]: Stacking v38: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor4.0.0 [32/82]: Stacking v38: LSM: security_secid_to_secctx in + netlink netfilter + - SAUCE: apparmor4.0.0 [33/82]: Stacking v38: NET: Store LSM netlabel data in + a lsmblob + - SAUCE: apparmor4.0.0 [34/82]: Stacking v38: binder: Pass LSM identifier for + confirmation + - SAUCE: apparmor4.0.0 [35/82]: Stacking v38: LSM: security_secid_to_secctx + module selection + - SAUCE: apparmor4.0.0 [36/82]: Stacking v38: Audit: Keep multiple LSM data in + audit_names + - SAUCE: apparmor4.0.0 [37/82]: Stacking v38: Audit: Create audit_stamp + structure + - SAUCE: apparmor4.0.0 [38/82]: Stacking v38: LSM: Add a function to report + multiple LSMs + - SAUCE: apparmor4.0.0 [39/82]: Stacking v38: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor4.0.0 [40/82]: Stacking v38: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor4.0.0 [41/82]: Stacking v38: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor4.0.0 [42/82]: Stacking v38: Audit: Add record for multiple + object contexts + - SAUCE: apparmor4.0.0 [43/82]: Stacking v38: netlabel: Use a struct lsmblob + in audit data + - SAUCE: apparmor4.0.0 [44/82]: Stacking v38: LSM: Removed scaffolding + function lsmcontext_init + - SAUCE: apparmor4.0.0 [45/82]: Stacking v38: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor4.0.0 [46/82]: combine common_audit_data and + apparmor_audit_data + - SAUCE: apparmor4.0.0 [47/82]: setup slab cache for audit data + - SAUCE: apparmor4.0.0 [48/82]: rename audit_data->label to + audit_data->subj_label + - SAUCE: apparmor4.0.0 [49/82]: pass cred through to audit info. + - SAUCE: apparmor4.0.0 [50/82]: Improve debug print infrastructure + - SAUCE: apparmor4.0.0 [51/82]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor4.0.0 [52/82]: enable userspace upcall for mediation + - SAUCE: apparmor4.0.0 [53/82]: cache buffers on percpu list if there is lock + contention + - SAUCE: apparmor4.0.0 [54/82]: advertise availability of exended perms + - SAUCE: apparmor4.0.0 [56/82]: cleanup: provide separate audit messages for + file and policy checks + - SAUCE: apparmor4.0.0 [57/82]: prompt - lock down prompt interface + - SAUCE: apparmor4.0.0 [58/82]: prompt - ref count pdb + - SAUCE: apparmor4.0.0 [59/82]: prompt - allow controlling of caching of a + prompt response + - SAUCE: apparmor4.0.0 [60/82]: prompt - add refcount to audit_node in prep or + reuse and delete + - SAUCE: apparmor4.0.0 [61/82]: prompt - refactor to moving caching to + uresponse + - SAUCE: apparmor4.0.0 [62/82]: prompt - Improve debug statements + - SAUCE: apparmor4.0.0 [63/82]: prompt - fix caching + - SAUCE: apparmor4.0.0 [64/82]: prompt - rework build to use append fn, to + simplify adding strings + - SAUCE: apparmor4.0.0 [65/82]: prompt - refcount notifications + - SAUCE: apparmor4.0.0 [66/82]: prompt - add the ability to reply with a + profile name + - SAUCE: apparmor4.0.0 [67/82]: prompt - fix notification cache when updating + - SAUCE: apparmor4.0.0 [68/82]: prompt - add tailglob on name for cache + support + - SAUCE: apparmor4.0.0 [69/82]: prompt - allow profiles to set prompts as + interruptible + - SAUCE: apparmor4.0.0 [74/82]: advertise disconnected.path is available + - SAUCE: apparmor4.0.0 [75/82]: fix invalid reference on profile->disconnected + - SAUCE: apparmor4.0.0 [76/82]: add io_uring mediation + - SAUCE: apparmor4.0.0 [77/82]: apparmor: Fix regression in mount mediation + + * update apparmor and LSM stacking patch set (LP: #2028253) // [FFe] + apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic + (LP: #2032602) + - SAUCE: apparmor4.0.0 [70/82]: prompt - add support for advanced filtering of + notifications + - SAUCE: apparmor4.0.0 [71/82]: userns - add the ability to reference a global + variable for a feature value + - SAUCE: apparmor4.0.0 [72/82]: userns - make it so special unconfined + profiles can mediate user namespaces + - SAUCE: apparmor4.0.0 [73/82]: userns - allow restricting unprivileged + change_profile + + * LSM stacking and AppArmor for 6.2: additional fixes (LP: #2017903) // update + apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor4.0.0 [55/82]: fix profile verification and enable it + + * udev fails to make prctl() syscall with apparmor=0 (as used by maas by + default) (LP: #2016908) // update apparmor and LSM stacking patch set + (LP: #2028253) + - SAUCE: apparmor4.0.0 [27/82]: Stacking v38: Fix prctl() syscall with + apparmor=0 + + * Miscellaneous Ubuntu changes + - [Config] SECURITY_APPARMOR_RESTRICT_USERNS=y + + -- Paolo Pisati Fri, 03 Nov 2023 11:59:12 +0100 + +linux-unstable (6.6.0-8.8) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-8.8 -proposed tracker (LP: #2040243) + + * Miscellaneous Ubuntu changes + - abi: gc reference to phy-rtk-usb2/phy-rtk-usb3 + + -- Paolo Pisati Tue, 24 Oct 2023 10:55:34 +0200 + +linux-unstable (6.6.0-7.7) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-7.7 -proposed tracker (LP: #2040147) + + * test_021_aslr_dapper_libs from ubuntu_qrt_kernel_security failed on K-5.19 / + J-OEM-6.1 / J-6.2 AMD64 (LP: #1983357) + - [Config]: set ARCH_MMAP_RND_{COMPAT_, }BITS to the maximum + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.6-rc7 rebase + + -- Paolo Pisati Mon, 23 Oct 2023 11:51:14 +0200 + +linux-unstable (6.6.0-6.6) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-6.6 -proposed tracker (LP: #2039780) + + * Miscellaneous Ubuntu changes + - rebase on v6.6-rc6 + - [Config] updateconfigs following v6.6-rc6 rebase + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc6 + + -- Paolo Pisati Thu, 19 Oct 2023 12:09:16 +0200 + +linux-unstable (6.6.0-5.5) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-5.5 -proposed tracker (LP: #2038899) + + * Miscellaneous Ubuntu changes + - rebase on v6.6-rc5 + - [Config] updateconfigs following v6.6-rc5 rebase + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc5 + + -- Paolo Pisati Tue, 10 Oct 2023 11:18:41 +0200 + +linux-unstable (6.6.0-4.4) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-4.4 -proposed tracker (LP: #2038423) + + * Miscellaneous Ubuntu changes + - rebase on v6.6-rc4 + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc4 + + -- Paolo Pisati Wed, 04 Oct 2023 11:16:25 +0200 + +linux-unstable (6.6.0-3.3) mantic; urgency=medium + + * mantic/linux-unstable: 6.6.0-3.3 -proposed tracker (LP: #2037622) + + * Miscellaneous Ubuntu changes + - [Config] updateconfigs following v6.6-rc3 rebase + + * Miscellaneous upstream changes + - Revert "UBUNTU: SAUCE: enforce rust availability only on x86_64" + - arm64: rust: Enable Rust support for AArch64 + - arm64: rust: Enable PAC support for Rust. + - arm64: Restrict Rust support to little endian only. + + -- Paolo Pisati Thu, 28 Sep 2023 10:45:38 +0200 + +linux-unstable (6.6.0-2.2) mantic; urgency=medium + + * Miscellaneous upstream changes + - UBUBNTU: [Config] build all COMEDI drivers as modules + + -- Paolo Pisati Mon, 18 Sep 2023 14:42:56 +0200 + +linux-unstable (6.6.0-1.1) mantic; urgency=medium + + * Miscellaneous Ubuntu changes + - [Packaging] move linux to linux-unstable + - [Packaging] rebase on v6.6-rc1 + - [Config] updateconfigs following v6.6-rc1 rebase + - [packaging] skip ABI, modules and retpoline checks + - update dropped.txt + - [Config] SHIFT_FS FTBFS with Linux 6.6, disable it + - [Config] DELL_UART_BACKLIGHT FTBFS with Linux 6.6, disable it + - [Packaging] debian/dkms-versions: temporarily disable dkms + - [Packaging] temporarily disable signing for s390x + + [ Upstream Kernel Changes ] + + * Rebase to v6.6-rc1 + + -- Paolo Pisati Fri, 15 Sep 2023 14:42:18 +0200 + +linux-unstable (6.6.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Paolo Pisati Thu, 14 Sep 2023 15:03:19 +0200 + +linux (6.5.0-5.5) mantic; urgency=medium + + * mantic/linux: 6.5.0-5.5 -proposed tracker (LP: #2034546) + + * Packaging resync (LP: #1786013) + - [Packaging] update helper scripts + - debian/dkms-versions -- update from kernel-versions (main/d2023.08.23) + + +linux (6.5.0-4.4) mantic; urgency=medium + + * mantic/linux: 6.5.0-4.4 -proposed tracker (LP: #2034042) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/d2023.08.23) + + -- Andrea Righi Mon, 04 Sep 2023 16:55:44 +0200 + +linux (6.5.0-3.3) mantic; urgency=medium + + * mantic/linux: 6.5.0-3.3 -proposed tracker (LP: #2033904) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/d2023.08.23) + + * [23.10] Please test secure-boot and lockdown on the early 6.5 kernel (s390x) + (LP: #2026833) + - [Packaging] re-enable signing for s390x + + * Miscellaneous upstream changes + - module/decompress: use vmalloc() for zstd decompression workspace + + -- Andrea Righi Fri, 01 Sep 2023 16:15:33 +0200 + +linux (6.5.0-2.2) mantic; urgency=medium + + * mantic/linux: 6.5.0-2.2 -proposed tracker (LP: #2033240) + + * Soundwire support for Dell SKU0C87 devices (LP: #2029281) + - SAUCE: ASoC: Intel: soc-acpi: add support for Dell SKU0C87 devices + + * Fix numerous AER related issues (LP: #2033025) + - SAUCE: PCI/AER: Disable AER service during suspend, again + - SAUCE: PCI/DPC: Disable DPC service during suspend, again + + * Support Realtek RTL8852CE WiFi 6E/BT Combo (LP: #2025672) + - wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set() + - Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C + + [ Upstream Kernel Changes ] + + * Rebase to v6.5 + + -- Andrea Righi Mon, 28 Aug 2023 08:53:19 +0200 + +linux (6.5.0-1.1) mantic; urgency=medium + + * mantic/linux: 6.5.0-1.1 -proposed tracker (LP: #2032750) + + * Packaging resync (LP: #1786013) + - [Packaging] resync update-dkms-versions helper + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/d2023.07.26) + + * ceph: support idmapped mounts (LP: #2032959) + - SAUCE: libceph: add spinlock around osd->o_requests + - SAUCE: libceph: define struct ceph_sparse_extent and add some helpers + - SAUCE: libceph: new sparse_read op, support sparse reads on msgr2 crc + codepath + - SAUCE: libceph: support sparse reads on msgr2 secure codepath + - SAUCE: libceph: add sparse read support to msgr1 + - SAUCE: libceph: add sparse read support to OSD client + - SAUCE: ceph: add new mount option to enable sparse reads + - SAUCE: ceph: preallocate inode for ops that may create one + - SAUCE: ceph: make ceph_msdc_build_path use ref-walk + - SAUCE: libceph: add new iov_iter-based ceph_msg_data_type and + ceph_osd_data_type + - SAUCE: ceph: use osd_req_op_extent_osd_iter for netfs reads + - SAUCE: ceph: fscrypt_auth handling for ceph + - SAUCE: ceph: implement -o test_dummy_encryption mount option + - SAUCE: ceph: add fscrypt ioctls and ceph.fscrypt.auth vxattr + - SAUCE: ceph: make ioctl cmds more readable in debug log + - SAUCE: ceph: add base64 endcoding routines for encrypted names + - SAUCE: ceph: encode encrypted name in ceph_mdsc_build_path and dentry + release + - SAUCE: ceph: send alternate_name in MClientRequest + - SAUCE: ceph: decode alternate_name in lease info + - SAUCE: ceph: set DCACHE_NOKEY_NAME flag in ceph_lookup/atomic_open() + - SAUCE: ceph: make d_revalidate call fscrypt revalidator for encrypted + dentries + - SAUCE: ceph: add helpers for converting names for userland presentation + - SAUCE: ceph: make ceph_fill_trace and ceph_get_name decrypt names + - SAUCE: ceph: pass the request to parse_reply_info_readdir() + - SAUCE: ceph: add support to readdir for encrypted names + - SAUCE: ceph: create symlinks with encrypted and base64-encoded targets + - SAUCE: ceph: add some fscrypt guardrails + - SAUCE: ceph: allow encrypting a directory while not having Ax caps + - SAUCE: ceph: mark directory as non-complete after loading key + - SAUCE: ceph: size handling in MClientRequest, cap updates and inode traces + - SAUCE: ceph: handle fscrypt fields in cap messages from MDS + - SAUCE: ceph: add infrastructure for file encryption and decryption + - SAUCE: libceph: add CEPH_OSD_OP_ASSERT_VER support + - SAUCE: libceph: allow ceph_osdc_new_request to accept a multi-op read + - SAUCE: ceph: add object version support for sync read + - SAUCE: ceph: add truncate size handling support for fscrypt + - SAUCE: ceph: don't use special DIO path for encrypted inodes + - SAUCE: ceph: align data in pages in ceph_sync_write + - SAUCE: ceph: add read/modify/write to ceph_sync_write + - SAUCE: ceph: add encryption support to writepage and writepages + - SAUCE: ceph: plumb in decryption during reads + - SAUCE: ceph: invalidate pages when doing direct/sync writes + - SAUCE: ceph: add support for encrypted snapshot names + - SAUCE: ceph: prevent snapshot creation in encrypted locked directories + - SAUCE: ceph: update documentation regarding snapshot naming limitations + - SAUCE: ceph: drop messages from MDS when unmounting + - SAUCE: ceph: wait for OSD requests' callbacks to finish when unmounting + - SAUCE: ceph: fix updating i_truncate_pagecache_size for fscrypt + - SAUCE: ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper + - SAUCE: libceph: do not include crypto/algapi.h + - SAUCE: rbd: bump RBD_MAX_PARENT_CHAIN_LEN to 128 + - SAUCE: ceph: dump info about cap flushes when we're waiting too long for + them + - SAUCE: mm: BUG if filemap_alloc_folio gives us a folio with a non-NULL + ->private + - SAUCE: ceph: make sure all the files successfully put before unmounting + - SAUCE: ceph: BUG if MDS changed truncate_seq with client caps still + outstanding + - SAUCE: ceph: add the *_client debug macros support + - SAUCE: ceph: pass the mdsc to several helpers + - SAUCE: ceph: rename _to_client() to _to_fs_client() + - SAUCE: ceph: move mdsmap.h to fs/ceph/ + - SAUCE: ceph: add ceph_inode_to_client() helper support + - SAUCE: ceph: print the client global_id in all the debug logs + - SAUCE: ceph: make the members in struct ceph_mds_request_args_ext an union + - SAUCE: ceph: make num_fwd and num_retry to __u32 + - SAUCE: fs: export mnt_idmap_get/mnt_idmap_put + - SAUCE: ceph: stash idmapping in mdsc request + - SAUCE: ceph: handle idmapped mounts in create_request_message() + - SAUCE: ceph: add enable_unsafe_idmap module parameter + - SAUCE: ceph: pass an idmapping to mknod/symlink/mkdir + - SAUCE: ceph: allow idmapped getattr inode op + - SAUCE: ceph: allow idmapped permission inode op + - SAUCE: ceph: pass idmap to __ceph_setattr + - SAUCE: ceph: allow idmapped setattr inode op + - SAUCE: ceph/acl: allow idmapped set_acl inode op + - SAUCE: ceph/file: allow idmapped atomic_open inode op + - SAUCE: ceph: allow idmapped mounts + + * Got soft lockup CPU if dell_uart_backlight is probed (LP: #2032174) + - SAUCE: platform/x86: dell-uart-backlight: replace chars_in_buffer() with + flush_chars() + + * Fix ACPI TAD on some Intel based systems (LP: #2032767) + - ACPI: TAD: Install SystemCMOS address space handler for ACPI000E + + * Fix unreliable ethernet cable detection on I219 NIC (LP: #2028122) + - e1000e: Use PME poll to circumvent unreliable ACPI wake + + * Fix panel brightness issues on HP laptops (LP: #2032704) + - ACPI: video: Put ACPI video and its child devices into D0 on boot + + * FATAL:credentials.cc(127)] Check failed: . : Permission denied (13) + (LP: #2017980) + - [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * Support initrdless boot on default qemu virt models and openstack + (LP: #2030745) + - [Config] set VIRTIO_BLK=y for default qemu/openstack boot + + * Miscellaneous Ubuntu changes + - [Packaging] rust: use Rust 1.68.2 + - [Packaging] depend on clang/libclang-15 for Rust + - [Config] update toolchain versions in annotations + - [Config] update annotations after rebase to v6.5-rc6 + - [Config] update toolchain version in annotations + - [Packaging] temporarily disable Rust support + - [Packaging] temporarily disable signing for ppc64el + - [Packaging] temporarily disable signing for s390x + + -- Andrea Righi Thu, 24 Aug 2023 17:47:10 +0200 + +linux (6.5.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Andrea Righi Wed, 23 Aug 2023 08:14:48 +0200 + +linux-unstable (6.5.0-4.4) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-4.4 -proposed tracker (LP: #2029086) + + * Miscellaneous Ubuntu changes + - [Packaging] Add .NOTPARALLEL + - [Packaging] Remove meaningless $(header_arch) + - [Packaging] Fix File exists error in install-arch-headers + - [Packaging] clean debian/linux-* directories + - [Packaging] remove hmake + - [Packaging] install headers to debian/linux-libc-dev directly + - [Config] define CONFIG options for arm64 instead of arm64-generic + - [Config] update annotations after rebase to v6.5-rc4 + - [Packaging] temporarily disable Rust support + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc4 + + -- Andrea Righi Mon, 31 Jul 2023 08:41:59 +0200 + +linux-unstable (6.5.0-3.3) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-3.3 -proposed tracker (LP: #2028779) + + * enable Rust support in the kernel (LP: #2007654) + - SAUCE: rust: support rustc-1.69.0 + - [Packaging] depend on rustc-1.69.0 + + * Packaging resync (LP: #1786013) + - [Packaging] resync update-dkms-versions helper + - [Packaging] resync getabis + + * Fix UBSAN in Intel EDAC driver (LP: #2028746) + - EDAC/i10nm: Skip the absent memory controllers + + * Ship kernel modules Zstd compressed (LP: #2028568) + - SAUCE: Support but do not require compressed modules + - [Config] Enable support for ZSTD compressed modules + - [Packaging] ZSTD compress modules + + * update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor3.2.0 [02/60]: rename SK_CTX() to aa_sock and make it an + inline fn + - SAUCE: apparmor3.2.0 [05/60]: Add sysctls for additional controls of unpriv + userns restrictions + - SAUCE: apparmor3.2.0 [08/60]: Stacking v38: LSM: Identify modules by more + than name + - SAUCE: apparmor3.2.0 [09/60]: Stacking v38: LSM: Add an LSM identifier for + external use + - SAUCE: apparmor3.2.0 [10/60]: Stacking v38: LSM: Identify the process + attributes for each module + - SAUCE: apparmor3.2.0 [11/60]: Stacking v38: LSM: Maintain a table of LSM + attribute data + - SAUCE: apparmor3.2.0 [12/60]: Stacking v38: proc: Use lsmids instead of lsm + names for attrs + - SAUCE: apparmor3.2.0 [13/60]: Stacking v38: integrity: disassociate + ima_filter_rule from security_audit_rule + - SAUCE: apparmor3.2.0 [14/60]: Stacking v38: LSM: Infrastructure management + of the sock security + - SAUCE: apparmor3.2.0 [15/60]: Stacking v38: LSM: Add the lsmblob data + structure. + - SAUCE: apparmor3.2.0 [16/60]: Stacking v38: LSM: provide lsm name and id + slot mappings + - SAUCE: apparmor3.2.0 [17/60]: Stacking v38: IMA: avoid label collisions with + stacked LSMs + - SAUCE: apparmor3.2.0 [18/60]: Stacking v38: LSM: Use lsmblob in + security_audit_rule_match + - SAUCE: apparmor3.2.0 [19/60]: Stacking v38: LSM: Use lsmblob in + security_kernel_act_as + - SAUCE: apparmor3.2.0 [20/60]: Stacking v38: LSM: Use lsmblob in + security_secctx_to_secid + - SAUCE: apparmor3.2.0 [21/60]: Stacking v38: LSM: Use lsmblob in + security_secid_to_secctx + - SAUCE: apparmor3.2.0 [22/60]: Stacking v38: LSM: Use lsmblob in + security_ipc_getsecid + - SAUCE: apparmor3.2.0 [23/60]: Stacking v38: LSM: Use lsmblob in + security_current_getsecid + - SAUCE: apparmor3.2.0 [24/60]: Stacking v38: LSM: Use lsmblob in + security_inode_getsecid + - SAUCE: apparmor3.2.0 [25/60]: Stacking v38: LSM: Use lsmblob in + security_cred_getsecid + - SAUCE: apparmor3.2.0 [26/60]: Stacking v38: LSM: Specify which LSM to + display + - SAUCE: apparmor3.2.0 [28/60]: Stacking v38: LSM: Ensure the correct LSM + context releaser + - SAUCE: apparmor3.2.0 [29/60]: Stacking v38: LSM: Use lsmcontext in + security_secid_to_secctx + - SAUCE: apparmor3.2.0 [30/60]: Stacking v38: LSM: Use lsmcontext in + security_inode_getsecctx + - SAUCE: apparmor3.2.0 [31/60]: Stacking v38: Use lsmcontext in + security_dentry_init_security + - SAUCE: apparmor3.2.0 [32/60]: Stacking v38: LSM: security_secid_to_secctx in + netlink netfilter + - SAUCE: apparmor3.2.0 [33/60]: Stacking v38: NET: Store LSM netlabel data in + a lsmblob + - SAUCE: apparmor3.2.0 [34/60]: Stacking v38: binder: Pass LSM identifier for + confirmation + - SAUCE: apparmor3.2.0 [35/60]: Stacking v38: LSM: security_secid_to_secctx + module selection + - SAUCE: apparmor3.2.0 [36/60]: Stacking v38: Audit: Keep multiple LSM data in + audit_names + - SAUCE: apparmor3.2.0 [37/60]: Stacking v38: Audit: Create audit_stamp + structure + - SAUCE: apparmor3.2.0 [38/60]: Stacking v38: LSM: Add a function to report + multiple LSMs + - SAUCE: apparmor3.2.0 [39/60]: Stacking v38: Audit: Allow multiple records in + an audit_buffer + - SAUCE: apparmor3.2.0 [40/60]: Stacking v38: Audit: Add record for multiple + task security contexts + - SAUCE: apparmor3.2.0 [41/60]: Stacking v38: audit: multiple subject lsm + values for netlabel + - SAUCE: apparmor3.2.0 [42/60]: Stacking v38: Audit: Add record for multiple + object contexts + - SAUCE: apparmor3.2.0 [43/60]: Stacking v38: netlabel: Use a struct lsmblob + in audit data + - SAUCE: apparmor3.2.0 [44/60]: Stacking v38: LSM: Removed scaffolding + function lsmcontext_init + - SAUCE: apparmor3.2.0 [45/60]: Stacking v38: AppArmor: Remove the exclusive + flag + - SAUCE: apparmor3.2.0 [46/60]: combine common_audit_data and + apparmor_audit_data + - SAUCE: apparmor3.2.0 [47/60]: setup slab cache for audit data + - SAUCE: apparmor3.2.0 [48/60]: rename audit_data->label to + audit_data->subj_label + - SAUCE: apparmor3.2.0 [49/60]: pass cred through to audit info. + - SAUCE: apparmor3.2.0 [50/60]: Improve debug print infrastructure + - SAUCE: apparmor3.2.0 [51/60]: add the ability for profiles to have a + learning cache + - SAUCE: apparmor3.2.0 [52/60]: enable userspace upcall for mediation + - SAUCE: apparmor3.2.0 [53/60]: cache buffers on percpu list if there is lock + contention + - SAUCE: apparmor3.2.0 [55/60]: advertise availability of exended perms + - SAUCE: apparmor3.2.0 [60/60]: [Config] enable + CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * LSM stacking and AppArmor for 6.2: additional fixes (LP: #2017903) // update + apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor3.2.0 [57/60]: fix profile verification and enable it + + * udev fails to make prctl() syscall with apparmor=0 (as used by maas by + default) (LP: #2016908) // update apparmor and LSM stacking patch set + (LP: #2028253) + - SAUCE: apparmor3.2.0 [27/60]: Stacking v38: Fix prctl() syscall with + apparmor=0 + + * kinetic: apply new apparmor and LSM stacking patch set (LP: #1989983) // + update apparmor and LSM stacking patch set (LP: #2028253) + - SAUCE: apparmor3.2.0 [01/60]: add/use fns to print hash string hex value + - SAUCE: apparmor3.2.0 [03/60]: patch to provide compatibility with v2.x net + rules + - SAUCE: apparmor3.2.0 [04/60]: add user namespace creation mediation + - SAUCE: apparmor3.2.0 [06/60]: af_unix mediation + - SAUCE: apparmor3.2.0 [07/60]: Add fine grained mediation of posix mqueues + + * Miscellaneous Ubuntu changes + - [Packaging] Use consistent llvm/clang for rust + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc3 + + -- Andrea Righi Fri, 28 Jul 2023 07:44:20 +0200 + +linux-unstable (6.5.0-2.2) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-2.2 -proposed tracker (LP: #2027953) + + * Remove non-LPAE kernel flavor (LP: #2025265) + - [Packaging] Rename armhf generic-lpae flavor to generic + + * Please enable Renesas RZ platform serial installer (LP: #2022361) + - [Config] enable hihope RZ/G2M serial console + + * Miscellaneous Ubuntu changes + - [Packaging] snap: Remove old configs handling + - [Packaging] checks/final-checks: Remove old configs handling + - [Packaging] checks/final-checks: check existance of Makefile first + - [Packaging] checks/final-checks: Fix shellcheck issues + - [Packaging] add libstdc++-dev to the build dependencies + - [Config] update annotations after rebase to v6.5-rc2 + + * Miscellaneous upstream changes + - kbuild: rust: avoid creating temporary files + - rust: fix bindgen build error with UBSAN_BOUNDS_STRICT + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc2 + + -- Andrea Righi Tue, 18 Jul 2023 10:14:14 +0200 + +linux-unstable (6.5.0-1.1) mantic; urgency=medium + + * mantic/linux-unstable: 6.5.0-1.1 -proposed tracker (LP: #2026689) + + * CVE-2023-31248 + - netfilter: nf_tables: do not ignore genmask when looking up chain by id + + * CVE-2023-35001 + - netfilter: nf_tables: prevent OOB access in nft_byteorder_eval + + * HDMI output with More than one child device for port B in VBT error + (LP: #2025195) + - SAUCE: drm/i915/quirks: Add multiple VBT quirk for HP ZBook Power G10 + + * CVE-2023-2640 // CVE-2023-32629 + - SAUCE: overlayfs: default to userxattr when mounted from non initial user + namespace + + * Packaging resync (LP: #1786013) + - [Packaging] resync update-dkms-versions helper + + * enable Rust support in the kernel (LP: #2007654) + - SAUCE: btf, scripts: rust: drop is_rust_module.sh + - [Packaging] add rust dependencies + + * CVE-2023-2612 + - SAUCE: shiftfs: prevent lock unbalance in shiftfs_create_object() + + * Miscellaneous Ubuntu changes + - SAUCE: shiftfs: support linux 6.5 + - [Config] update annotations after rebase to v6.5-rc1 + - [Config] temporarily disable Rust + + [ Upstream Kernel Changes ] + + * Rebase to v6.5-rc1 + + -- Andrea Righi Mon, 10 Jul 2023 09:15:26 +0200 + +linux-unstable (6.5.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Andrea Righi Wed, 05 Jul 2023 12:48:39 +0200 + +linux-unstable (6.4.0-8.8) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-8.8 -proposed tracker (LP: #2025018) + + * Miscellaneous Ubuntu changes + - [Config] update toolchain version (gcc) in annotations + + [ Upstream Kernel Changes ] + + * Rebase to v6.4 + + -- Andrea Righi Mon, 26 Jun 2023 09:14:02 +0200 + +linux-unstable (6.4.0-7.7) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-7.7 -proposed tracker (LP: #2024338) + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc7 + + -- Andrea Righi Mon, 19 Jun 2023 08:51:27 +0200 + +linux-unstable (6.4.0-6.6) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-6.6 -proposed tracker (LP: #2023966) + + * Packaging resync (LP: #1786013) + - [Packaging] update annotations scripts + + * enable multi-gen LRU by default (LP: #2023629) + - [Config] enable multi-gen LRU by default + + * Fix Monitor lost after replug WD19TBS to SUT port with VGA/DVI to type-C + dongle (LP: #2021949) + - thunderbolt: Do not touch CL state configuration during discovery + - thunderbolt: Increase DisplayPort Connection Manager handshake timeout + + * Neuter signing tarballs (LP: #2012776) + - [Packaging] remove the signing tarball support + + * Enable Tracing Configs for OSNOISE and TIMERLAT (LP: #2018591) + - [Config] Enable OSNOISE_TRACER and TIMERLAT_TRACER configs + + * Miscellaneous Ubuntu changes + - [Config] Add CONFIG_AS_HAS_NON_CONST_LEB128 on riscv64 + - [Packaging] introduce do_lib_rust and enable it only on generic amd64 + - [Config] update annotations after rebase to v6.4-rc6 + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc6 + + -- Andrea Righi Thu, 15 Jun 2023 20:11:07 +0200 + +linux-unstable (6.4.0-5.5) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-5.5 -proposed tracker (LP: #2022886) + + * Miscellaneous Ubuntu changes + - [Packaging] update getabis to support linux-unstable + - UBUNTU [Config]: disable hibernation on riscv64 + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc5 + + -- Andrea Righi Tue, 06 Jun 2023 08:18:01 +0200 + +linux-unstable (6.4.0-4.4) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-4.4 -proposed tracker (LP: #2021597) + + * Miscellaneous Ubuntu changes + - [Config] udpate annotations after rebase to v6.4-rc4 + + -- Andrea Righi Tue, 30 May 2023 11:55:41 +0200 + +linux-unstable (6.4.0-3.3) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-3.3 -proposed tracker (LP: #2021497) + + * Packaging resync (LP: #1786013) + - [Packaging] resync git-ubuntu-log + - [Packaging] resync getabis + + * support python < 3.9 with annotations (LP: #2020531) + - [Packaging] kconfig/annotations.py: support older way of merging dicts + + * generate linux-lib-rust only on amd64 (LP: #2020356) + - [Packaging] generate linux-lib-rust only on amd64 + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: never drop configs that have notes different than + the parent + - [Config] drop CONFIG_SMBFS_COMMON from annotations + - [Packaging] perf: build without libtraceevent + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc4 + + -- Andrea Righi Tue, 30 May 2023 08:38:10 +0200 + +linux-unstable (6.4.0-2.2) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-2.2 -proposed tracker (LP: #2020330) + + * Computer with Intel Atom CPU will not boot with Kernel 6.2.0-20 + (LP: #2017444) + - [Config]: Disable CONFIG_INTEL_ATOMISP + + * Fix NVME storage with RAID ON disappeared under Dell factory WINPE + environment (LP: #2011768) + - SAUCE: PCI: vmd: Reset VMD config register between soft reboots + + * Miscellaneous Ubuntu changes + - [Packaging] Drop support of old config handling + - [Config] update annotations after rebase to v6.4-rc3 + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc3 + + -- Andrea Righi Mon, 22 May 2023 11:22:14 +0200 + +linux-unstable (6.4.0-1.1) mantic; urgency=medium + + * mantic/linux-unstable: 6.4.0-1.1 -proposed tracker (LP: #2019965) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - [Packaging] update helper scripts + + * Kernel 6.1 bumped the disk consumption on default images by 15% + (LP: #2015867) + - [Packaging] introduce a separate linux-lib-rust package + + * Miscellaneous Ubuntu changes + - [Config] enable CONFIG_BLK_DEV_UBLK on amd64 + - [Packaging] annotations: use python3 in the shebang + - SAUCE: blk-throttle: Fix io statistics for cgroup v1 + - [Packaging] move to v6.4 and rename to linux-unstable + - [Config] update annotations after rebase to v6.4-rc1 + - [Packaging] temporarily disable perf + - [Packaging] temporarily disable bpftool + - [Config] ppc64el: reduce CONFIG_ARCH_FORCE_MAX_ORDER from 9 to 8 + - SAUCE: perf: explicitly disable libtraceevent + + [ Upstream Kernel Changes ] + + * Rebase to v6.4-rc2 + + -- Andrea Righi Thu, 18 May 2023 07:34:09 +0200 + +linux-unstable (6.4.0-0.0) mantic; urgency=medium + + * Empty entry + + -- Andrea Righi Wed, 17 May 2023 15:29:25 +0200 + +linux-unstable (6.3.0-2.2) lunar; urgency=medium + + * lunar/linux-unstable: 6.3.0-2.2 -proposed tracker (LP: #2017788) + + * Miscellaneous Ubuntu changes + - [Packaging] move python3-dev to build-depends + + -- Andrea Righi Wed, 26 Apr 2023 21:52:12 +0200 + +linux-unstable (6.3.0-1.1) lunar; urgency=medium + + * lunar/linux-unstable: 6.3.0-1.1 -proposed tracker (LP: #2017776) + + * RFC: virtio and virtio-scsi should be built in (LP: #1685291) + - [Config] Mark CONFIG_SCSI_VIRTIO built-in + + * Debian autoreconstruct Fix restoration of execute permissions (LP: #2015498) + - [Debian] autoreconstruct - fix restoration of execute permissions + + * [SRU][Jammy] CONFIG_PCI_MESON is not enabled (LP: #2007745) + - [Config] arm64: Enable PCI_MESON module + + * vmd may fail to create sysfs entry while `pci_rescan_bus()` called in some + other drivers like wwan (LP: #2011389) + - SAUCE: PCI: vmd: guard device addition and removal + + * Lunar update: v6.2.9 upstream stable release (LP: #2016877) + - [Config] ppc64: updateconfigs following v6.2.9 stable updates + + * Lunar update: v6.2.8 upstream stable release (LP: #2016876) + - [Config] ppc64: updateconfigs following v6.2.8 stable updates + + * Miscellaneous Ubuntu changes + - [Packaging] Move final-checks script to debian/scripts/checks + - [Packaging] checks/final-checks: Honor 'do_skip_checks' + - [Packaging] Drop wireguard DKMS + - [Packaging] Remove update-version-dkms + - [Packaging] debian/rules: Add DKMS info to 'printenv' output + - [Packaging] ignore KBUILD_VERBOSE in arch-has-odm-enabled.sh + - SAUCE: shiftfs: support linux 6.3 + - [Packaging] move to v6.3 and rename to linux-unstable + - [Config] latency-related optimizations + - [Config] update annotations after rebase to v6.3 + - [Packaging] temporarily disable dkms + + [ Upstream Kernel Changes ] + + * Rebase to v6.3 + + -- Andrea Righi Wed, 26 Apr 2023 14:53:52 +0200 + +linux-unstable (6.3.0-0.0) lunar; urgency=medium + + * Empty entry + + -- Andrea Righi Tue, 25 Apr 2023 10:24:12 +0200 + +linux (6.2.0-21.21) lunar; urgency=medium + + * lunar/linux: 6.2.0-21.21 -proposed tracker (LP: #2016249) + + * efivarfs:efivarfs.sh in ubuntu_kernel_selftests crash L-6.2 ARM64 node + dazzle (rcu_preempt detected stalls) (LP: #2015741) + - efi/libstub: smbios: Use length member instead of record struct size + - arm64: efi: Use SMBIOS processor version to key off Ampere quirk + - efi/libstub: smbios: Drop unused 'recsize' parameter + + * Miscellaneous Ubuntu changes + - SAUCE: selftests/bpf: ignore pointer types check with clang + - SAUCE: selftests/bpf: avoid conflicting data types in profiler.inc.h + - [Packaging] get rid of unnecessary artifacts in linux-headers + + * Miscellaneous upstream changes + - Revert "UBUNTU: SAUCE: Revert "efi: random: refresh non-volatile random seed + when RNG is initialized"" + - Revert "UBUNTU: SAUCE: Revert "efi: random: fix NULL-deref when refreshing + seed"" + + -- Andrea Righi Fri, 14 Apr 2023 12:11:49 +0200 + +linux (6.2.0-20.20) lunar; urgency=medium + + * lunar/linux: 6.2.0-20.20 -proposed tracker (LP: #2015429) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/master) + + * FTBFS with different dkms or when makeflags are set (LP: #2015361) + - [Packaging] FTBFS with different dkms or when makeflags are set + + * expoline.o is packaged unconditionally for s390x (LP: #2013209) + - [Packaging] Copy expoline.o only when produced by the build + + * net:l2tp.sh failure with lunar:linux 6.2 (LP: #2013014) + - SAUCE: l2tp: generate correct module alias strings + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: prevent duplicate include lines + + -- Andrea Righi Thu, 06 Apr 2023 08:33:14 +0200 + +linux (6.2.0-19.19) lunar; urgency=medium + + * lunar/linux: 6.2.0-19.19 -proposed tracker (LP: #2012488) + + * Neuter signing tarballs (LP: #2012776) + - [Packaging] neuter the signing tarball + + * LSM stacking and AppArmor refresh for 6.2 kernel (LP: #2012136) + - Revert "UBUNTU: [Config] define CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS" + - Revert "UBUNTU: SAUCE: apparmor: add user namespace creation mediation" + - Revert "UBUNTU: SAUCE: apparmor: Add fine grained mediation of posix + mqueues" + - Revert "UBUNTU: SAUCE: Revert "apparmor: make __aa_path_perm() static"" + - Revert "UBUNTU: SAUCE: LSM: Specify which LSM to display (using struct cred + as input)" + - Revert "UBUNTU: SAUCE: apparmor: Fix build error, make sk parameter const" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in smk_netlbl_mls()" + - Revert "UBUNTU: SAUCE: LSM: change ima_read_file() to use lsmblob" + - Revert "UBUNTU: SAUCE: apparmor: rename kzfree() to kfree_sensitive()" + - Revert "UBUNTU: SAUCE: AppArmor: Remove the exclusive flag" + - Revert "UBUNTU: SAUCE: LSM: Add /proc attr entry for full LSM context" + - Revert "UBUNTU: SAUCE: Audit: Fix incorrect static inline function + declration." + - Revert "UBUNTU: SAUCE: Audit: Fix for missing NULL check" + - Revert "UBUNTU: SAUCE: Audit: Add a new record for multiple object LSM + attributes" + - Revert "UBUNTU: SAUCE: Audit: Add new record for multiple process LSM + attributes" + - Revert "UBUNTU: SAUCE: NET: Store LSM netlabel data in a lsmblob" + - Revert "UBUNTU: SAUCE: LSM: security_secid_to_secctx in netlink netfilter" + - Revert "UBUNTU: SAUCE: LSM: Use lsmcontext in security_inode_getsecctx" + - Revert "UBUNTU: SAUCE: LSM: Use lsmcontext in security_secid_to_secctx" + - Revert "UBUNTU: SAUCE: LSM: Ensure the correct LSM context releaser" + - Revert "UBUNTU: SAUCE: LSM: Specify which LSM to display" + - Revert "UBUNTU: SAUCE: IMA: Change internal interfaces to use lsmblobs" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_cred_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_inode_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_task_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_ipc_getsecid" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_secid_to_secctx" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_secctx_to_secid" + - Revert "UBUNTU: SAUCE: net: Prepare UDS for security module stacking" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_kernel_act_as" + - Revert "UBUNTU: SAUCE: LSM: Use lsmblob in security_audit_rule_match" + - Revert "UBUNTU: SAUCE: LSM: Create and manage the lsmblob data structure." + - Revert "UBUNTU: SAUCE: LSM: Infrastructure management of the sock security" + - Revert "UBUNTU: SAUCE: apparmor: LSM stacking: switch from SK_CTX() to + aa_sock()" + - Revert "UBUNTU: SAUCE: apparmor: rename aa_sock() to aa_unix_sk()" + - Revert "UBUNTU: SAUCE: apparmor: disable showing the mode as part of a secid + to secctx" + - Revert "UBUNTU: SAUCE: apparmor: fix use after free in sk_peer_label" + - Revert "UBUNTU: SAUCE: apparmor: af_unix mediation" + - Revert "UBUNTU: SAUCE: apparmor: patch to provide compatibility with v2.x + net rules" + - Revert "UBUNTU: SAUCE: apparmor: add/use fns to print hash string hex value" + - SAUCE: apparmor: rename SK_CTX() to aa_sock and make it an inline fn + - SAUCE: apparmor: Add sysctls for additional controls of unpriv userns + restrictions + - SAUCE: Stacking v38: LSM: Identify modules by more than name + - SAUCE: Stacking v38: LSM: Add an LSM identifier for external use + - SAUCE: Stacking v38: LSM: Identify the process attributes for each module + - SAUCE: Stacking v38: LSM: Maintain a table of LSM attribute data + - SAUCE: Stacking v38: proc: Use lsmids instead of lsm names for attrs + - SAUCE: Stacking v38: integrity: disassociate ima_filter_rule from + security_audit_rule + - SAUCE: Stacking v38: LSM: Infrastructure management of the sock security + - SAUCE: Stacking v38: LSM: Add the lsmblob data structure. + - SAUCE: Stacking v38: LSM: provide lsm name and id slot mappings + - SAUCE: Stacking v38: IMA: avoid label collisions with stacked LSMs + - SAUCE: Stacking v38: LSM: Use lsmblob in security_audit_rule_match + - SAUCE: Stacking v38: LSM: Use lsmblob in security_kernel_act_as + - SAUCE: Stacking v38: LSM: Use lsmblob in security_secctx_to_secid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_secid_to_secctx + - SAUCE: Stacking v38: LSM: Use lsmblob in security_ipc_getsecid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_current_getsecid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_inode_getsecid + - SAUCE: Stacking v38: LSM: Use lsmblob in security_cred_getsecid + - SAUCE: Stacking v38: LSM: Specify which LSM to display + - SAUCE: Stacking v38: LSM: Ensure the correct LSM context releaser + - SAUCE: Stacking v38: LSM: Use lsmcontext in security_secid_to_secctx + - SAUCE: Stacking v38: LSM: Use lsmcontext in security_inode_getsecctx + - SAUCE: Stacking v38: Use lsmcontext in security_dentry_init_security + - SAUCE: Stacking v38: LSM: security_secid_to_secctx in netlink netfilter + - SAUCE: Stacking v38: NET: Store LSM netlabel data in a lsmblob + - SAUCE: Stacking v38: binder: Pass LSM identifier for confirmation + - SAUCE: Stacking v38: LSM: security_secid_to_secctx module selection + - SAUCE: Stacking v38: Audit: Keep multiple LSM data in audit_names + - SAUCE: Stacking v38: Audit: Create audit_stamp structure + - SAUCE: Stacking v38: LSM: Add a function to report multiple LSMs + - SAUCE: Stacking v38: Audit: Allow multiple records in an audit_buffer + - SAUCE: Stacking v38: Audit: Add record for multiple task security contexts + - SAUCE: Stacking v38: audit: multiple subject lsm values for netlabel + - SAUCE: Stacking v38: Audit: Add record for multiple object contexts + - SAUCE: Stacking v38: netlabel: Use a struct lsmblob in audit data + - SAUCE: Stacking v38: LSM: Removed scaffolding function lsmcontext_init + - SAUCE: Stacking v38: AppArmor: Remove the exclusive flag + - SAUCE: apparmor: combine common_audit_data and apparmor_audit_data + - SAUCE: apparmor: setup slab cache for audit data + - SAUCE: apparmor: rename audit_data->label to audit_data->subj_label + - SAUCE: apparmor: pass cred through to audit info. + - SAUCE: apparmor: Improve debug print infrastructure + - SAUCE: apparmor: add the ability for profiles to have a learning cache + - SAUCE: apparmor: enable userspace upcall for mediation + - SAUCE: apparmor: cache buffers on percpu list if there is lock contention + - SAUCE: apparmor: fix policy_compat permission remap with extended + permissions + - SAUCE: apparmor: advertise availability of exended perms + - [Config] define CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + + * kinetic: apply new apparmor and LSM stacking patch set (LP: #1989983) // LSM + stacking and AppArmor refresh for 6.2 kernel (LP: #2012136) + - SAUCE: apparmor: add/use fns to print hash string hex value + - SAUCE: apparmor: patch to provide compatibility with v2.x net rules + - SAUCE: apparmor: add user namespace creation mediation + - SAUCE: apparmor: af_unix mediation + - SAUCE: apparmor: Add fine grained mediation of posix mqueues + + * devlink_port_split from ubuntu_kernel_selftests.net fails on hirsute + (KeyError: 'flavour') (LP: #1937133) + - selftests: net: devlink_port_split.py: skip test if no suitable device + available + + * NFS deathlock with last Kernel 5.4.0-144.161 and 5.15.0-67.74 (LP: #2009325) + - NFS: Correct timing for assigning access cache timestamp + + -- Andrea Righi Sat, 25 Mar 2023 07:37:30 +0100 + +linux (6.2.0-18.18) lunar; urgency=medium + + * lunar/linux: 6.2.0-18.18 -proposed tracker (LP: #2011750) + + * lunar/linux 6.2 fails to boot on arm64 (LP: #2011748) + - SAUCE: Revert "efi: random: fix NULL-deref when refreshing seed" + - SAUCE: Revert "efi: random: refresh non-volatile random seed when RNG is + initialized" + + -- Andrea Righi Wed, 15 Mar 2023 23:54:18 +0100 + +linux (6.2.0-17.17) lunar; urgency=medium + + * lunar/linux: 6.2.0-17.17 -proposed tracker (LP: #2011593) + + * lunar/linux 6.2 fails to boot on ppc64el (LP: #2011413) + - SAUCE: Revert "powerpc: remove STACK_FRAME_OVERHEAD" + - SAUCE: Revert "powerpc/pseries: hvcall stack frame overhead" + + * Speaker / Audio/Mic mute LED don't work on a HP platform (LP: #2011379) + - SAUCE: ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP + platform + + * Some QHD panels fail to refresh when PSR2 enabled (LP: #2009014) + - SAUCE: drm/i915/psr: Use calculated io and fast wake lines + + * Lunar update: v6.2.6 upstream stable release (LP: #2011431) + - tpm: disable hwrng for fTPM on some AMD designs + - wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext" + - staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script + - staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh + - Linux 6.2.6 + + * Lunar update: v6.2.5 upstream stable release (LP: #2011430) + - net/sched: Retire tcindex classifier + - auxdisplay: hd44780: Fix potential memory leak in hd44780_remove() + - fs/jfs: fix shift exponent db_agl2size negative + - driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event() + - f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin + - f2fs: fix to avoid potential deadlock + - objtool: Fix memory leak in create_static_call_sections() + - soc: mediatek: mtk-pm-domains: Allow mt8186 ADSP default power on + - soc: qcom: socinfo: Fix soc_id order + - memory: renesas-rpc-if: Split-off private data from struct rpcif + - memory: renesas-rpc-if: Move resource acquisition to .probe() + - soc: mediatek: mtk-svs: Enable the IRQ later + - pwm: sifive: Always let the first pwm_apply_state succeed + - pwm: stm32-lp: fix the check on arr and cmp registers update + - f2fs: introduce trace_f2fs_replace_atomic_write_block + - f2fs: clear atomic_write_task in f2fs_abort_atomic_write() + - soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail + - soc: mediatek: mtk-svs: reset svs when svs_resume() fail + - soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() + - f2fs: fix to do sanity check on extent cache correctly + - fs: f2fs: initialize fsdata in pagecache_write() + - f2fs: allow set compression option of files without blocks + - f2fs: fix to abort atomic write only during do_exist() + - um: vector: Fix memory leak in vector_config + - ubi: ensure that VID header offset + VID header size <= alloc, size + - ubifs: Fix build errors as symbol undefined + - ubifs: Fix memory leak in ubifs_sysfs_init() + - ubifs: Rectify space budget for ubifs_symlink() if symlink is encrypted + - ubifs: Rectify space budget for ubifs_xrename() + - ubifs: Fix wrong dirty space budget for dirty inode + - ubifs: do_rename: Fix wrong space budget when target inode's nlink > 1 + - ubifs: Reserve one leb for each journal head while doing budget + - ubi: Fix use-after-free when volume resizing failed + - ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume() + - ubifs: Fix memory leak in alloc_wbufs() + - ubi: Fix possible null-ptr-deref in ubi_free_volume() + - ubifs: Re-statistic cleaned znode count if commit failed + - ubifs: dirty_cow_znode: Fix memleak in error handling path + - ubifs: ubifs_writepage: Mark page dirty after writing inode failed + - ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process + - ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling + fastmap + - ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show() + - ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed + - f2fs: fix to handle F2FS_IOC_START_ATOMIC_REPLACE in f2fs_compat_ioctl() + - f2fs: fix to avoid potential memory corruption in __update_iostat_latency() + - f2fs: fix to update age extent correctly during truncation + - f2fs: fix to update age extent in f2fs_do_zero_range() + - soc: qcom: stats: Populate all subsystem debugfs files + - f2fs: introduce IS_F2FS_IPU_* macro + - f2fs: fix to set ipu policy + - ext4: use ext4_fc_tl_mem in fast-commit replay path + - ext4: don't show commit interval if it is zero + - netfilter: nf_tables: allow to fetch set elements when table has an owner + - x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list + - um: virtio_uml: free command if adding to virtqueue failed + - um: virtio_uml: mark device as unregistered when breaking it + - um: virtio_uml: move device breaking into workqueue + - um: virt-pci: properly remove PCI device from bus + - f2fs: synchronize atomic write aborts + - watchdog: rzg2l_wdt: Issue a reset before we put the PM clocks + - watchdog: rzg2l_wdt: Handle TYPE-B reset for RZ/V2M + - watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in + error path + - watchdog: Fix kmemleak in watchdog_cdev_register + - watchdog: pcwd_usb: Fix attempting to access uninitialized memory + - watchdog: sbsa_wdog: Make sure the timeout programming is within the limits + - netfilter: ctnetlink: fix possible refcount leak in + ctnetlink_create_conntrack() + - netfilter: conntrack: fix rmmod double-free race + - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces + - netfilter: ebtables: fix table blob use-after-free + - netfilter: xt_length: use skb len to match in length_mt6 + - netfilter: ctnetlink: make event listener tracking global + - netfilter: x_tables: fix percpu counter block leak on error path when + creating new netns + - swiotlb: mark swiotlb_memblock_alloc() as __init + - ptp: vclock: use mutex to fix "sleep on atomic" bug + - drm/i915: move a Kconfig symbol to unbreak the menu presentation + - ipv6: Add lwtunnel encap size of all siblings in nexthop calculation + - drm/i915/xelpmp: Consider GSI offset when doing MCR lookups + - octeontx2-pf: Recalculate UDP checksum for ptp 1-step sync packet + - net: sunhme: Fix region request + - sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop + - octeontx2-pf: Use correct struct reference in test condition + - net: fix __dev_kfree_skb_any() vs drop monitor + - 9p/xen: fix version parsing + - 9p/xen: fix connection sequence + - 9p/rdma: unmap receive dma buffer in rdma_request()/post_recv() + - spi: tegra210-quad: Fix validate combined sequence + - mlx5: fix skb leak while fifo resync and push + - mlx5: fix possible ptp queue fifo use-after-free + - net/mlx5: ECPF, wait for VF pages only after disabling host PFs + - net/mlx5e: Verify flow_source cap before using it + - net/mlx5: Geneve, Fix handling of Geneve object id as error code + - ext4: fix incorrect options show of original mount_opt and extend mount_opt2 + - nfc: fix memory leak of se_io context in nfc_genl_se_io + - net/sched: transition act_pedit to rcu and percpu stats + - net/sched: act_pedit: fix action bind logic + - net/sched: act_mpls: fix action bind logic + - net/sched: act_sample: fix action bind logic + - net: dsa: seville: ignore mscc-miim read errors from Lynx PCS + - net: dsa: felix: fix internal MDIO controller resource length + - ARM: dts: aspeed: p10bmc: Update battery node name + - ARM: dts: spear320-hmi: correct STMPE GPIO compatible + - tcp: tcp_check_req() can be called from process context + - vc_screen: modify vcs_size() handling in vcs_read() + - spi: tegra210-quad: Fix iterator outside loop + - rtc: sun6i: Always export the internal oscillator + - genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() + - scsi: ipr: Work around fortify-string warning + - scsi: mpi3mr: Fix an issue found by KASAN + - scsi: mpi3mr: Use number of bits to manage bitmap sizes + - rtc: allow rtc_read_alarm without read_alarm callback + - io_uring: fix size calculation when registering buf ring + - loop: loop_set_status_from_info() check before assignment + - ASoC: adau7118: don't disable regulators on device unbind + - ASoC: apple: mca: Fix final status read on SERDES reset + - ASoC: apple: mca: Fix SERDES reset sequence + - ASoC: apple: mca: Improve handling of unavailable DMA channels + - nvme: bring back auto-removal of deleted namespaces during sequential scan + - nvme-tcp: don't access released socket during error recovery + - nvme-fabrics: show well known discovery name + - ASoC: zl38060 add gpiolib dependency + - ASoC: mediatek: mt8195: add missing initialization + - thermal: intel: quark_dts: fix error pointer dereference + - thermal: intel: BXT_PMIC: select REGMAP instead of depending on it + - cpufreq: apple-soc: Fix an IS_ERR() vs NULL check + - tracing: Add NULL checks for buffer in ring_buffer_free_read_page() + - kernel/printk/index.c: fix memory leak with using debugfs_lookup() + - firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3 + - bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC + support + - mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak + - IB/hfi1: Update RMT size calculation + - iommu: Remove deferred attach check from __iommu_detach_device() + - PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3() + - media: uvcvideo: Remove format descriptions + - media: uvcvideo: Handle cameras with invalid descriptors + - media: uvcvideo: Handle errors from calls to usb_string + - media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910 + - media: uvcvideo: Silence memcpy() run-time false positive warnings + - USB: fix memory leak with using debugfs_lookup() + - cacheinfo: Fix shared_cpu_map to handle shared caches at different levels + - usb: fotg210: List different variants + - dt-bindings: usb: Add device id for Genesys Logic hub controller + - staging: emxx_udc: Add checks for dma_alloc_coherent() + - tty: fix out-of-bounds access in tty_driver_lookup_tty() + - tty: serial: fsl_lpuart: disable the CTS when send break signal + - serial: sc16is7xx: setup GPIO controller later in probe + - mei: bus-fixup:upon error print return values of send and receive + - tools/iio/iio_utils:fix memory leak + - bus: mhi: ep: Fix the debug message for MHI_PKT_TYPE_RESET_CHAN_CMD cmd + - iio: accel: mma9551_core: Prevent uninitialized variable in + mma9551_read_status_word() + - iio: accel: mma9551_core: Prevent uninitialized variable in + mma9551_read_config_word() + - media: uvcvideo: Add GUID for BGRA/X 8:8:8:8 + - soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe() + - PCI/portdrv: Prevent LS7A Bus Master clearing on shutdown + - PCI: loongson: Prevent LS7A MRRS increases + - staging: pi433: fix memory leak with using debugfs_lookup() + - USB: dwc3: fix memory leak with using debugfs_lookup() + - USB: chipidea: fix memory leak with using debugfs_lookup() + - USB: ULPI: fix memory leak with using debugfs_lookup() + - USB: uhci: fix memory leak with using debugfs_lookup() + - USB: sl811: fix memory leak with using debugfs_lookup() + - USB: fotg210: fix memory leak with using debugfs_lookup() + - USB: isp116x: fix memory leak with using debugfs_lookup() + - USB: isp1362: fix memory leak with using debugfs_lookup() + - USB: gadget: gr_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: bcm63xx_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup() + - USB: gadget: pxa27x_udc: fix memory leak with using debugfs_lookup() + - usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer + math + - USB: ene_usb6250: Allocate enough memory for full object + - usb: uvc: Enumerate valid values for color matching + - usb: gadget: uvc: Make bSourceID read/write + - PCI: Align extra resources for hotplug bridges properly + - PCI: Take other bus devices into account when distributing resources + - PCI: Distribute available resources for root buses, too + - tty: pcn_uart: fix memory leak with using debugfs_lookup() + - misc: vmw_balloon: fix memory leak with using debugfs_lookup() + - drivers: base: component: fix memory leak with using debugfs_lookup() + - drivers: base: dd: fix memory leak with using debugfs_lookup() + - kernel/fail_function: fix memory leak with using debugfs_lookup() + - PCI: loongson: Add more devices that need MRRS quirk + - PCI: Add ACS quirk for Wangxun NICs + - PCI: pciehp: Add Qualcomm quirk for Command Completed erratum + - phy: rockchip-typec: Fix unsigned comparison with less than zero + - RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size + - soundwire: cadence: Remove wasted space in response_buf + - soundwire: cadence: Drain the RX FIFO after an IO timeout + - eth: fealnx: bring back this old driver + - net: tls: avoid hanging tasks on the tx_lock + - x86/resctl: fix scheduler confusion with 'current' + - vDPA/ifcvf: decouple hw features manipulators from the adapter + - vDPA/ifcvf: decouple config space ops from the adapter + - vDPA/ifcvf: alloc the mgmt_dev before the adapter + - vDPA/ifcvf: decouple vq IRQ releasers from the adapter + - vDPA/ifcvf: decouple config IRQ releaser from the adapter + - vDPA/ifcvf: decouple vq irq requester from the adapter + - vDPA/ifcvf: decouple config/dev IRQ requester and vectors allocator from the + adapter + - vDPA/ifcvf: ifcvf_request_irq works on ifcvf_hw + - vDPA/ifcvf: manage ifcvf_hw in the mgmt_dev + - vDPA/ifcvf: allocate the adapter in dev_add() + - drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state() + - drm/display/dp_mst: Fix down/up message handling after sink disconnect + - drm/display/dp_mst: Fix down message handling after a packet reception error + - drm/display/dp_mst: Fix payload addition on a disconnected sink + - drm/i915/dp_mst: Add the MST topology state for modesetted CRTCs + - drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload() + - drm/i915/dp_mst: Fix payload removal during output disabling + - drm/i915: Fix system suspend without fbdev being initialized + - media: uvcvideo: Fix race condition with usb_kill_urb + - arm64: efi: Make efi_rt_lock a raw_spinlock + - usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails + - Linux 6.2.5 + + * Lunar update: v6.2.4 upstream stable release (LP: #2011428) + - Revert "blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and + blkcg_deactivate_policy()" + - Revert "blk-cgroup: dropping parent refcount after pd_free_fn() is done" + - Linux 6.2.4 + + * Lunar update: v6.2.3 upstream stable release (LP: #2011425) + - HID: asus: use spinlock to protect concurrent accesses + - HID: asus: use spinlock to safely schedule workers + - iommu/amd: Fix error handling for pdev_pri_ats_enable() + - iommu/amd: Skip attach device domain is same as new domain + - iommu/amd: Improve page fault error reporting + - iommu: Attach device group to old domain in error path + - powerpc/mm: Rearrange if-else block to avoid clang warning + - ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller" + - ARM: OMAP2+: Fix memory leak in realtime_counter_init() + - arm64: dts: qcom: qcs404: use symbol names for PCIe resets + - arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up + - arm64: dts: qcom: sm6115: Fix UFS node + - arm64: dts: qcom: sm6115: Provide xo clk to rpmcc + - arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k + - arm64: dts: qcom: pmi8950: Correct rev_1250v channel label to mv + - arm64: dts: qcom: sm6350: Fix up the ramoops node + - arm64: dts: qcom: sdm670-google-sargo: keep pm660 ldo8 on + - arm64: dts: qcom: Re-enable resin on MSM8998 and SDM845 boards + - arm64: dts: qcom: sm8350-sagami: Configure SLG51000 PMIC on PDX215 + - arm64: dts: qcom: sm8350-sagami: Add GPIO line names for PMIC GPIOs + - arm64: dts: qcom: sm8350-sagami: Rectify GPIO keys + - arm64: dts: qcom: sm6350-lena: Flatten gpio-keys pinctrl state + - arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings + - arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down) + - arm64: dts: imx8m: Align SoC unique ID node unit address + - ARM: zynq: Fix refcount leak in zynq_early_slcr_init + - fs: dlm: fix return value check in dlm_memory_init() + - arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY + - arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description + - arm64: dts: mediatek: mt8192: Fix systimer 13 MHz clock description + - arm64: dts: mediatek: mt8195: Fix systimer 13 MHz clock description + - arm64: dts: mediatek: mt8186: Fix systimer 13 MHz clock description + - arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name + - arm64: dts: qcom: sdm845-xiaomi-beryllium: fix audio codec interrupt pin + name + - x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC + - arm64: dts: qcom: sc7180: correct SPMI bus address cells + - arm64: dts: qcom: sc7280: correct SPMI bus address cells + - arm64: dts: qcom: sc8280xp: correct SPMI bus address cells + - arm64: dts: qcom: sm8450: correct Soundwire wakeup interrupt name + - arm64: dts: qcom: sdm845: make DP node follow the schema + - arm64: dts: qcom: msm8996-oneplus-common: drop vdda-supply from DSI PHY + - arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers + - arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node + - arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name + - arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names + - arm64: dts: meson-gx: Fix Ethernet MAC address unit name + - arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name + - arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address + - cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* + - arm64: dts: ti: k3-am62-main: Fix clocks for McSPI + - arm64: tegra: Fix duplicate regulator on Jetson TX1 + - arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size + - arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem + - arm64: dts: qcom: msm8956: use SoC-specific compat for tsens + - arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names + - arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY + - arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY + - arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges + - arm64: dts: qcom: ipq8074: fix Gen3 PCIe node + - arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names + - arm64: dts: meson: remove CPU opps below 1GHz for G12A boards + - ARM: OMAP1: call platform_device_put() in error case in + omap1_dm_timer_init() + - arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken + - ARM: bcm2835_defconfig: Enable the framebuffer + - ARM: s3c: fix s3c64xx_set_timer_source prototype + - arm64: dts: ti: k3-j7200: Fix wakeup pinmux range + - ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato + - ARM: imx: Call ida_simple_remove() for ida_simple_get + - arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name + - arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name + - arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible + - arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB + controller node + - arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names + property + - arm64: dts: amlogic: meson-gx: add missing unit address to rng node name + - arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc + node name + - arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node + name + - arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node + name + - arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name + - arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names + - arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name + - arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name + - arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties + - arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip + - locking/rwsem: Disable preemption in all down_read*() and up_read() code + paths + - arm64: tegra: Mark host1x as dma-coherent on Tegra194/234 + - arm64: dts: renesas: beacon-renesom: Fix gpio expander reference + - arm64: dts: meson: radxa-zero: allow usb otg mode + - arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN + - ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference + - ublk_drv: remove nr_aborted_queues from ublk_device + - ublk_drv: don't probe partitions if the ubq daemon isn't trusted + - ARM: dts: imx7s: correct iomuxc gpr mux controller cells + - sbitmap: remove redundant check in __sbitmap_queue_get_batch + - sbitmap: correct wake_batch recalculation to avoid potential IO hung + - arm64: dts: mt8195: Fix CPU map for single-cluster SoC + - arm64: dts: mt8192: Fix CPU map for single-cluster SoC + - arm64: dts: mt8186: Fix CPU map for single-cluster SoC + - arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node + - arm64: dts: mediatek: mt8186: Fix watchdog compatible + - arm64: dts: mediatek: mt8195: Fix watchdog compatible + - arm64: dts: mediatek: mt7986: Fix watchdog compatible + - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 + - arm64: dts: qcom: sm8450-nagara: Correct firmware paths + - blk-mq: avoid sleep in blk_mq_alloc_request_hctx + - blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx + - blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait + - blk-mq: Fix potential io hung for shared sbitmap per tagset + - blk-mq: correct stale comment of .get_budget + - arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input + - arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC + - arm64: dts: qcom: sm8350: drop incorrect cells from serial + - arm64: dts: qcom: sm8450: drop incorrect cells from serial + - arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM + and MPSS memory regions + - arm64: dts: qcom: msm8953: correct TLMM gpio-ranges + - arm64: dts: qcom: sm6115: correct TLMM gpio-ranges + - arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators + - s390/dasd: Fix potential memleak in dasd_eckd_init() + - io_uring,audit: don't log IORING_OP_MADVISE + - sched/rt: pick_next_rt_entity(): check list_entry + - perf/x86/intel/ds: Fix the conversion from TSC to perf time + - x86/perf/zhaoxin: Add stepping check for ZXC + - KEYS: asymmetric: Fix ECDSA use via keyctl uapi + - block: ublk: check IO buffer based on flag need_get_data + - arm64: dts: qcom: pmk8350: Use the correct PON compatible + - erofs: relinquish volume with mutex held + - block: sync mixed merged request's failfast with 1st bio's + - block: Fix io statistics for cgroup in throttle path + - block: bio-integrity: Copy flags when bio_integrity_payload is cloned + - block: use proper return value from bio_failfast() + - wifi: mt76: mt7915: add missing of_node_put() + - wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host + - wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks + - wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown() + - wifi: mt76: mt7996: fix insecure data handling of + mt7996_mcu_rx_radar_detected() + - wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set() + - wifi: mt76: mt7915: check return value before accessing free_block_num + - wifi: mt76: mt7996: check return value before accessing free_block_num + - wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() + - wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr() + - wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv + - wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power + - wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read() + - wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() + - wifi: mt76: fix coverity uninit_use_in_call in + mt76_connac2_reverse_frag0_hdr_trans() + - wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() + - wifi: rsi: Fix memory leak in rsi_coex_attach() + - wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave() + - wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave() + - wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave() + - wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave() + - wifi: libertas: fix memory leak in lbs_init_adapter() + - wifi: rtl8xxxu: Fix assignment to bit field priv->pi_enabled + - wifi: rtl8xxxu: Fix assignment to bit field priv->cck_agc_report_type + - wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave() + - wifi: rtw89: 8852c: rfk: correct DACK setting + - wifi: rtw89: 8852c: rfk: correct DPK settings + - wifi: rtlwifi: Fix global-out-of-bounds bug in + _rtl8812ae_phy_set_txpower_limit() + - libbpf: Fix single-line struct definition output in btf_dump + - libbpf: Fix btf__align_of() by taking into account field offsets + - wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave() + - wifi: ipw2200: fix memory leak in ipw_wdev_init() + - wifi: wilc1000: fix potential memory leak in wilc_mac_xmit() + - wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() + - wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() + - wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid() + - wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave() + - wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave() + - wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave() + - wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave() + - wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave() + - libbpf: Fix invalid return address register in s390 + - crypto: x86/ghash - fix unaligned access in ghash_setkey() + - crypto: ux500 - update debug config after ux500 cryp driver removal + - ACPICA: Drop port I/O validation for some regions + - genirq: Fix the return type of kstat_cpu_irqs_sum() + - rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose + - rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls + - rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes() + - lib/mpi: Fix buffer overrun when SG is too long + - crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2 + - platform/chrome: cros_ec_typec: Update port DP VDO + - ACPICA: nsrepair: handle cases without a return value correctly + - libbpf: Fix map creation flags sanitization + - bpf_doc: Fix build error with older python versions + - selftests/xsk: print correct payload for packet dump + - selftests/xsk: print correct error codes when exiting + - arm64/cpufeature: Fix field sign for DIT hwcap detection + - arm64/sysreg: Fix errors in 32 bit enumeration values + - kselftest/arm64: Fix syscall-abi for systems without 128 bit SME + - workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex + - s390/early: fix sclp_early_sccb variable lifetime + - s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue() + - x86/signal: Fix the value returned by strict_sas_size() + - thermal/drivers/tsens: Drop msm8976-specific defines + - thermal/drivers/tsens: Sort out msm8976 vs msm8956 data + - thermal/drivers/tsens: fix slope values for msm8939 + - thermal/drivers/tsens: limit num_sensors to 9 for msm8939 + - wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() + - wifi: rtw89: Add missing check for alloc_workqueue + - wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU + - wifi: orinoco: check return value of hermes_write_wordrec() + - wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter() + - wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update() + - thermal/drivers/imx_sc_thermal: Fix the loop condition + - wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback + function + - wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails + - wifi: ath9k: Fix potential stack-out-of-bounds write in + ath9k_wmi_rsp_callback() + - wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup + - wifi: cfg80211: Fix extended KCK key length check in + nl80211_set_rekey_data() + - ACPI: battery: Fix missing NUL-termination with large strings + - selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m + - crypto: ccp - Failure on re-initialization due to duplicate sysfs filename + - crypto: essiv - Handle EBUSY correctly + - crypto: seqiv - Handle EBUSY correctly + - powercap: fix possible name leak in powercap_register_zone() + - bpf: Fix state pruning for STACK_DYNPTR stack slots + - bpf: Fix missing var_off check for ARG_PTR_TO_DYNPTR + - bpf: Fix partial dynptr stack slot reads/writes + - x86/microcode: Add a parameter to microcode_check() to store CPU + capabilities + - x86/microcode: Check CPU capabilities after late microcode update correctly + - x86/microcode: Adjust late loading result reporting message + - net: ethernet: ti: am65-cpsw/cpts: Fix CPTS release action + - selftests/bpf: Fix vmtest static compilation error + - crypto: xts - Handle EBUSY correctly + - leds: led-class: Add missing put_device() to led_put() + - drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size + - s390/bpf: Add expoline to tail calls + - wifi: iwlwifi: mei: fix compilation errors in rfkill() + - kselftest/arm64: Fix enumeration of systems without 128 bit SME + - can: rcar_canfd: Fix R-Car V3U CAN mode selection + - can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses + - selftests/bpf: Initialize tc in xdp_synproxy + - crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware + - bpftool: profile online CPUs instead of possible + - wifi: mt76: mt7921: fix deadlock in mt7921_abort_roc + - wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after + init_work + - wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttling + - wifi: mt76: mt7915: rework mt7915_thermal_temp_store() + - wifi: mt76: mt7921: fix channel switch fail in monitor mode + - wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna() + - wifi: mt76: mt7996: update register for CFEND_RATE + - wifi: mt76: connac: fix POWER_CTRL command name typo + - wifi: mt76: mt7921: fix invalid remain_on_channel duration + - wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit + - wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit + - wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup + - wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_trans + - wifi: mt76: mt7915: fix WED TxS reporting + - wifi: mt76: add memory barrier to SDIO queue kick + - wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val + - net/mlx5: Enhance debug print in page allocation failure + - irqchip: Fix refcount leak in platform_irqchip_probe + - irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains + - irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe + - irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe + - s390/mem_detect: fix detect_memory() error handling + - s390/vmem: fix empty page tables cleanup under KASAN + - s390/boot: cleanup decompressor header files + - s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails + - s390/boot: fix mem_detect extended area allocation + - net: add sock_init_data_uid() + - tun: tun_chr_open(): correctly initialize socket uid + - tap: tap_open(): correctly initialize socket uid + - rxrpc: Fix overwaking on call poking + - OPP: fix error checking in opp_migrate_dentry() + - cpufreq: davinci: Fix clk use after free + - Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds + - Bluetooth: L2CAP: Fix potential user-after-free + - Bluetooth: hci_qca: get wakeup status from serdev device handle + - net: ipa: generic command param fix + - s390: vfio-ap: tighten the NIB validity check + - s390/ap: fix status returned by ap_aqic() + - s390/ap: fix status returned by ap_qact() + - libbpf: Fix alen calculation in libbpf_nla_dump_errormsg() + - xen/grant-dma-iommu: Implement a dummy probe_device() callback + - rds: rds_rm_zerocopy_callback() correct order for list_add_tail() + - crypto: rsa-pkcs1pad - Use akcipher_request_complete + - m68k: /proc/hardware should depend on PROC_FS + - RISC-V: time: initialize hrtimer based broadcast clock event device + - clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first + use + - wifi: iwl3945: Add missing check for create_singlethread_workqueue + - wifi: iwl4965: Add missing check for create_singlethread_workqueue() + - wifi: brcmfmac: Rename Cypress 89459 to BCM4355 + - wifi: brcmfmac: pcie: Add IDs/properties for BCM4355 + - wifi: brcmfmac: pcie: Add IDs/properties for BCM4377 + - wifi: brcmfmac: pcie: Perform correct BCM4364 firmware selection + - wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize() + - wifi: rtw89: fix parsing offset for MCC C2H + - selftests/bpf: Fix out-of-srctree build + - ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models + - ACPI: resource: Do IRQ override on all TongFang GMxRGxx + - crypto: octeontx2 - Fix objects shared between several modules + - crypto: crypto4xx - Call dma_unmap_page when done + - vfio/ccw: remove WARN_ON during shutdown + - wifi: mac80211: move color collision detection report in a delayed work + - wifi: mac80211: make rate u32 in sta_set_rate_info_rx() + - wifi: mac80211: fix non-MLO station association + - wifi: mac80211: Don't translate MLD addresses for multicast + - wifi: mac80211: avoid u32_encode_bits() warning + - wifi: mac80211: fix off-by-one link setting + - tools/lib/thermal: Fix thermal_sampling_exit() + - thermal/drivers/hisi: Drop second sensor hi3660 + - selftests/bpf: Fix map_kptr test. + - wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta() + - bpf: Zeroing allocated object from slab in bpf memory allocator + - selftests/bpf: Fix xdp_do_redirect on s390x + - can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a + bus error + - can: esd_usb: Make use of can_change_state() and relocate checking skb for + NULL + - xsk: check IFF_UP earlier in Tx path + - LoongArch, bpf: Use 4 instructions for function address in JIT + - bpf: Fix global subprog context argument resolution logic + - irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts + - irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts + - net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link() + - net/smc: fix application data exception + - selftests/net: Interpret UDP_GRO cmsg data as an int value + - l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() + - net: bcmgenet: fix MoCA LED control + - net: lan966x: Fix possible deadlock inside PTP + - net/mlx4_en: Introduce flexible array to silence overflow warning + - net/mlx5e: Align IPsec ASO result memory to be as required by hardware + - selftest: fib_tests: Always cleanup before exit + - sefltests: netdevsim: wait for devlink instance after netns removal + - drm: Fix potential null-ptr-deref due to drmm_mode_config_init() + - drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats + - drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec + - drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC + - drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC + - drm/bridge: megachips: Fix error handling in i2c_register_driver() + - drm/vkms: Fix memory leak in vkms_init() + - drm/vkms: Fix null-ptr-deref in vkms_release() + - drm/modes: Use strscpy() to copy command-line mode name + - drm/vc4: dpi: Fix format mapping for RGB565 + - drm/bridge: it6505: Guard bridge power in IRQ handler + - drm: tidss: Fix pixel format definition + - gpu: ipu-v3: common: Add of_node_put() for reference returned by + of_graph_get_port_by_id() + - drm/ast: Init iosys_map pointer as I/O memory for damage handling + - drm/vc4: drop all currently held locks if deadlock happens + - hwmon: (ftsteutates) Fix scaling of measurements + - drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() + - drm/msm/hdmi: Add missing check for alloc_ordered_workqueue + - pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins + - pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain + - pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups + - drm/vc4: hvs: Configure the HVS COB allocations + - drm/vc4: hvs: Set AXI panic modes + - drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4 + - drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5 + - drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5 + - drm/vc4: hdmi: Correct interlaced timings again + - drm/msm: clean event_thread->worker in case of an error + - drm/panel-edp: fix name for IVO product id 854b + - scsi: qla2xxx: Fix exchange oversubscription + - scsi: qla2xxx: Fix exchange oversubscription for management commands + - scsi: qla2xxx: edif: Fix clang warning + - ASoC: fsl_sai: initialize is_dsp_mode flag + - drm/bridge: tc358767: Set default CLRSIPO count + - drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() + - ALSA: hda/ca0132: minor fix for allocation size + - drm/amdgpu: Use the sched from entity for amdgpu_cs trace + - drm/msm/gem: Add check for kmalloc + - drm/msm/dpu: Disallow unallocated resources to be returned + - drm/bridge: lt9611: fix sleep mode setup + - drm/bridge: lt9611: fix HPD reenablement + - drm/bridge: lt9611: fix polarity programming + - drm/bridge: lt9611: fix programming of video modes + - drm/bridge: lt9611: fix clock calculation + - drm/bridge: lt9611: pass a pointer to the of node + - regulator: tps65219: use IS_ERR() to detect an error pointer + - drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness + - drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags + - drm/msm/dsi: Allow 2 CTRLs on v2.5.0 + - scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 + - drm/msm/dpu: sc7180: add missing WB2 clock control + - drm/msm: use strscpy instead of strncpy + - drm/msm/dpu: Add check for cstate + - drm/msm/dpu: Add check for pstates + - drm/msm/mdp5: Add check for kzalloc + - habanalabs: bugs fixes in timestamps buff alloc + - pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback() + - pinctrl: mediatek: Initialize variable pullen and pullup to zero + - pinctrl: mediatek: Initialize variable *buf to zero + - gpu: host1x: Fix mask for syncpoint increment register + - gpu: host1x: Don't skip assigning syncpoints to channels + - drm/tegra: firewall: Check for is_addr_reg existence in IMM check + - drm/i915/mtl: Add initial gt workarounds + - drm/i915/xehp: GAM registers don't need to be re-applied on engine resets + - pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts + - drm/i915/xehp: Annotate a couple more workaround registers as MCR + - drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update() + - drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd + - drm/mediatek: Use NULL instead of 0 for NULL pointer + - drm/mediatek: Drop unbalanced obj unref + - drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc + - drm/mediatek: Clean dangling pointer on bind error path + - ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress() + - dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp- + ccorr + - gpio: pca9570: rename platform_data to chip_data + - gpio: vf610: connect GPIO label to dev name + - ASoC: topology: Properly access value coming from topology file + - spi: dw_bt1: fix MUX_MMIO dependencies + - ASoC: mchp-spdifrx: fix controls which rely on rsr register + - ASoC: mchp-spdifrx: fix return value in case completion times out + - ASoC: mchp-spdifrx: fix controls that works with completion mechanism + - ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove() + - dm: improve shrinker debug names + - regmap: apply reg_base and reg_downshift for single register ops + - accel: fix CONFIG_DRM dependencies + - ASoC: rsnd: fixup #endif position + - ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params() + - ASoC: dt-bindings: meson: fix gx-card codec node regex + - regulator: tps65219: use generic set_bypass() + - hwmon: (asus-ec-sensors) add missing mutex path + - hwmon: (ltc2945) Handle error case in ltc2945_value_store + - ALSA: hda: Fix the control element identification for multiple codecs + - drm/amdgpu: fix enum odm_combine_mode mismatch + - scsi: mpt3sas: Fix a memory leak + - scsi: aic94xx: Add missing check for dma_map_single() + - HID: multitouch: Add quirks for flipped axes + - HID: retain initial quirks set up when creating HID devices + - ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared + - ASoC: qcom: q6apm-dai: fix race condition while updating the position + pointer + - ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag + - ASoC: codecs: lpass: register mclk after runtime pm + - ASoC: codecs: lpass: fix incorrect mclk rate + - drm/amd/display: don't call dc_interrupt_set() for disabled crtcs + - HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support + - spi: bcm63xx-hsspi: Fix multi-bit mode setting + - hwmon: (mlxreg-fan) Return zero speed for broken fan + - ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init + - dm: remove flush_scheduled_work() during local_exit() + - nfs4trace: fix state manager flag printing + - NFS: fix disabling of swap + - drm/i915/pvc: Implement recommended caching policy + - drm/i915/pvc: Annotate two more workaround/tuning registers as MCR + - drm/i915: Fix GEN8_MISCCPCTL + - spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one() + - ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared + - HID: bigben: use spinlock to protect concurrent accesses + - HID: bigben_worker() remove unneeded check on report_field + - HID: bigben: use spinlock to safely schedule workers + - hid: bigben_probe(): validate report count + - ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks + - drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() + - NFSD: enhance inter-server copy cleanup + - NFSD: fix leaked reference count of nfsd4_ssc_umount_item + - nfsd: fix race to check ls_layouts + - nfsd: clean up potential nfsd_file refcount leaks in COPY codepath + - NFSD: fix problems with cleanup on errors in nfsd4_copy + - nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open + - nfsd: don't fsync nfsd_files on last close + - NFSD: copy the whole verifier in nfsd_copy_write_verifier + - cifs: Fix lost destroy smbd connection when MR allocate failed + - cifs: Fix warning and UAF when destroy the MR list + - cifs: use tcon allocation functions even for dummy tcon + - gfs2: jdata writepage fix + - perf llvm: Fix inadvertent file creation + - leds: led-core: Fix refcount leak in of_led_get() + - leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest() + - leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver + - tools/tracing/rtla: osnoise_hist: use total duration for average calculation + - perf inject: Use perf_data__read() for auxtrace + - perf intel-pt: Do not try to queue auxtrace data on pipe + - perf stat: Hide invalid uncore event output for aggr mode + - perf jevents: Correct bad character encoding + - perf test bpf: Skip test if kernel-debuginfo is not present + - perf tools: Fix auto-complete on aarch64 + - perf stat: Avoid merging/aggregating metric counts twice + - sparc: allow PM configs for sparc32 COMPILE_TEST + - selftests: find echo binary to use -ne options + - selftests/ftrace: Fix bash specific "==" operator + - selftests: use printf instead of echo -ne + - perf record: Fix segfault with --overwrite and --max-size + - printf: fix errname.c list + - perf tests stat_all_metrics: Change true workload to sleep workload for + system wide check + - objtool: add UACCESS exceptions for __tsan_volatile_read/write + - selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols + - sysctl: fix proc_dobool() usability + - mfd: rk808: Re-add rk808-clkout to RK818 + - mfd: cs5535: Don't build on UML + - mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() + - dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0 + - RDMA/erdma: Fix refcount leak in erdma_mmap + - dmaengine: HISI_DMA should depend on ARCH_HISI + - RDMA/hns: Fix refcount leak in hns_roce_mmap + - iio: light: tsl2563: Do not hardcode interrupt trigger type + - usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe() + - i2c: designware: fix i2c_dw_clk_rate() return size to be u32 + - i2c: qcom-geni: change i2c_master_hub to static + - soundwire: cadence: Don't overflow the command FIFOs + - driver core: fix potential null-ptr-deref in device_add() + - kobject: Fix slab-out-of-bounds in fill_kobj_path() + - alpha/boot/tools/objstrip: fix the check for ELF header + - media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() + - media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU + - media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX + - media: uvcvideo: Refactor power_line_frequency_controls_limited + - coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR + - coresight: cti: Prevent negative values of enable count + - coresight: cti: Add PM runtime call in enable_store + - usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count + - PCI/IOV: Enlarge virtfn sysfs name buffer + - PCI: switchtec: Return -EFAULT for copy_to_user() errors + - PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc + - hwtracing: hisi_ptt: Only add the supported devices to the filters list + - tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() + - tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown() + - serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init() + - Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in + set_protocol" + - eeprom: idt_89hpesx: Fix error handling in idt_init() + - applicom: Fix PCI device refcount leak in applicom_init() + - firmware: stratix10-svc: add missing gen_pool_destroy() in + stratix10_svc_drv_probe() + - firmware: stratix10-svc: fix error handle while alloc/add device failed + - VMCI: check context->notify_page after call to get_user_pages_fast() to + avoid GPF + - mei: pxp: Use correct macros to initialize uuid_le + - misc/mei/hdcp: Use correct macros to initialize uuid_le + - misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe() + - iommu/exynos: Fix error handling in exynos_iommu_init() + - driver core: fix resource leak in device_add() + - driver core: location: Free struct acpi_pld_info *pld before return false + - drivers: base: transport_class: fix possible memory leak + - drivers: base: transport_class: fix resource leak when + transport_add_device() fails + - firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle + - selftests: iommu: Fix test_cmd_destroy_access() call in user_copy + - iommufd: Add three missing structures in ucmd_buffer + - fotg210-udc: Add missing completion handler + - dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers + - fpga: microchip-spi: move SPI I/O buffers out of stack + - fpga: microchip-spi: rewrite status polling in a time measurable way + - usb: early: xhci-dbc: Fix a potential out-of-bound memory access + - tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case + - RDMA/cxgb4: add null-ptr-check after ip_dev_find() + - usb: musb: mediatek: don't unregister something that wasn't registered + - usb: gadget: configfs: Restrict symlink creation is UDC already binded + - phy: mediatek: remove temporary variable @mask_ + - PCI: mt7621: Delay phy ports initialization + - iommu/vt-d: Set No Execute Enable bit in PASID table entry + - power: supply: remove faulty cooling logic + - RDMA/siw: Fix user page pinning accounting + - RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() + - usb: max-3421: Fix setting of I/O pins + - RDMA/irdma: Cap MSIX used to online CPUs + 1 + - serial: fsl_lpuart: fix RS485 RTS polariy inverse issue + - tty: serial: imx: disable Ageing Timer interrupt request irq + - driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links + - driver core: fw_devlink: Don't purge child fwnode's consumer links + - driver core: fw_devlink: Allow marking a fwnode link as being part of a + cycle + - driver core: fw_devlink: Consolidate device link flag computation + - driver core: fw_devlink: Improve check for fwnode with no device/driver + - driver core: fw_devlink: Make cycle detection more robust + - mtd: mtdpart: Don't create platform device that'll never probe + - usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev + - dmaengine: dw-edma: Fix readq_ch() return value truncation + - PCI: Fix dropping valid root bus resources with .end = zero + - phy: rockchip-typec: fix tcphy_get_mode error case + - PCI: qcom: Fix host-init error handling + - iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() + - iommu: Fix error unwind in iommu_group_alloc() + - iommu/amd: Do not identity map v2 capable device when snp is enabled + - dmaengine: sf-pdma: pdma_desc memory leak fix + - dmaengine: dw-axi-dmac: Do not dereference NULL structure + - dmaengine: ptdma: check for null desc before calling pt_cmd_callback + - iommu/vt-d: Fix error handling in sva enable/disable paths + - iommu/vt-d: Allow to use flush-queue when first level is default + - RDMA/rxe: Cleanup mr_check_range + - RDMA/rxe: Move rxe_map_mr_sg to rxe_mr.c + - RDMA-rxe: Isolate mr code from atomic_reply() + - RDMA-rxe: Isolate mr code from atomic_write_reply() + - RDMA/rxe: Cleanup page variables in rxe_mr.c + - RDMA/rxe: Replace rxe_map and rxe_phys_buf by xarray + - Subject: RDMA/rxe: Handle zero length rdma + - RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering + memory on first packet + - RDMA/rxe: Fix missing memory barriers in rxe_queue.h + - IB/hfi1: Fix math bugs in hfi1_can_pin_pages() + - IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors + - Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after + use" + - remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers + - media: ti: cal: fix possible memory leak in cal_ctx_create() + - media: platform: ti: Add missing check for devm_regulator_get + - media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in + imx7_csi_init() + - powerpc: Remove linker flag from KBUILD_AFLAGS + - s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64 + - builddeb: clean generated package content + - media: max9286: Fix memleak in max9286_v4l2_register() + - media: ov2740: Fix memleak in ov2740_init_controls() + - media: ov5675: Fix memleak in ov5675_init_controls() + - media: i2c: tc358746: fix missing return assignment + - media: i2c: tc358746: fix ignoring read error in g_register callback + - media: i2c: tc358746: fix possible endianness issue + - media: ov5640: Fix soft reset sequence and timings + - media: ov5640: Handle delays when no reset_gpio set + - media: mc: Get media_device directly from pad + - media: i2c: ov772x: Fix memleak in ov772x_probe() + - media: i2c: imx219: Split common registers from mode tables + - media: i2c: imx219: Fix binning for RAW8 capture + - media: platform: mtk-mdp3: Fix return value check in mdp_probe() + - media: camss: csiphy-3ph: avoid undefined behavior + - media: platform: mtk-mdp3: fix Kconfig dependencies + - media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data + - media: v4l2-jpeg: ignore the unknown APP14 marker + - media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399 + - media: imx-jpeg: Apply clk_bulk api instead of operating specific clk + - media: amphion: correct the unspecified color space + - media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers + - media: rc: Fix use-after-free bugs caused by ene_tx_irqsim() + - media: atomisp: fix videobuf2 Kconfig depenendency + - media: atomisp: Only set default_run_mode on first open of a stream/asd + - media: i2c: ov7670: 0 instead of -EINVAL was returned + - media: usb: siano: Fix use after free bugs caused by do_submit_urb + - media: saa7134: Use video_unregister_device for radio_dev + - rpmsg: glink: Avoid infinite loop on intent for missing channel + - rpmsg: glink: Release driver_override + - ARM: OMAP2+: omap4-common: Fix refcount leak bug + - arm64: dts: qcom: msm8996: Add additional A2NoC clocks + - udf: Define EFSCORRUPTED error code + - context_tracking: Fix noinstr vs KASAN + - exit: Detect and fix irq disabled state in oops + - ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy + - fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected + - blk-iocost: fix divide by 0 error in calc_lcoefs() + - blk-cgroup: dropping parent refcount after pd_free_fn() is done + - blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and + blkcg_deactivate_policy() + - trace/blktrace: fix memory leak with using debugfs_lookup() + - btrfs: scrub: improve tree block error reporting + - arm64: zynqmp: Enable hs termination flag for USB dwc3 controller + - cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE + - x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads + - cpuidle: drivers: firmware: psci: Dont instrument suspend code + - cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG + - perf/x86/intel/uncore: Add Meteor Lake support + - wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() + - wifi: ath11k: fix monitor mode bringup crash + - wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds() + - rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks + - rcu: Suppress smp_processor_id() complaint in + synchronize_rcu_expedited_wait() + - srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL + - rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug + - rcu-tasks: Handle queue-shrink/callback-enqueue race condition + - wifi: ath11k: debugfs: fix to work with multiple PCI devices + - thermal: intel: Fix unsigned comparison with less than zero + - timers: Prevent union confusion from unexpected restart_syscall() + - x86/bugs: Reset speculation control settings on init + - bpftool: Always disable stack protection for BPF objects + - wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out- + of-bounds + - wifi: rtw89: fix assignation of TX BD RAM table + - wifi: mt7601u: fix an integer underflow + - inet: fix fast path in __inet_hash_connect() + - ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB + - ice: add missing checks for PF vsi type + - Compiler attributes: GCC cold function alignment workarounds + - ACPI: Don't build ACPICA with '-Os' + - bpf, docs: Fix modulo zero, division by zero, overflow, and underflow + - thermal: intel: intel_pch: Add support for Wellsburg PCH + - clocksource: Suspend the watchdog temporarily when high read latency + detected + - crypto: hisilicon: Wipe entire pool on error + - net: bcmgenet: Add a check for oversized packets + - m68k: Check syscall_trace_enter() return code + - s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping + - netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj() + - can: isotp: check CAN address family in isotp_bind() + - gcc-plugins: drop -std=gnu++11 to fix GCC 13 build + - tools/power/x86/intel-speed-select: Add Emerald Rapid quirk + - platform/x86: dell-ddv: Add support for interface version 3 + - wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup + - ACPI: video: Fix Lenovo Ideapad Z570 DMI match + - net/mlx5: fw_tracer: Fix debug print + - coda: Avoid partial allocation of sig_inputArgs + - uaccess: Add minimum bounds check on kernel buffer size + - s390/idle: mark arch_cpu_idle() noinstr + - time/debug: Fix memory leak with using debugfs_lookup() + - PM: domains: fix memory leak with using debugfs_lookup() + - PM: EM: fix memory leak with using debugfs_lookup() + - Bluetooth: Fix issue with Actions Semi ATS2851 based devices + - Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 + - Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE + - wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30 + - hv_netvsc: Check status in SEND_RNDIS_PKT completion message + - s390/kfence: fix page fault reporting + - devlink: Fix TP_STRUCT_entry in trace of devlink health report + - scm: add user copy checks to put_cmsg() + - drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F + - drm: panel-orientation-quirks: Add quirk for DynaBook K50 + - drm/amd/display: Reduce expected sdp bandwidth for dcn321 + - drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h + write + - drm/amd/display: Fix potential null-deref in dm_resume + - drm/omap: dsi: Fix excessive stack usage + - HID: Add Mapping for System Microphone Mute + - drm/tiny: ili9486: Do not assume 8-bit only SPI controllers + - drm/amd/display: Defer DIG FIFO disable after VID stream enable + - drm/radeon: free iio for atombios when driver shutdown + - drm/amd: Avoid BUG() for case of SRIOV missing IP version + - drm/amdkfd: Page aligned memory reserve size + - scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write + - Revert "fbcon: don't lose the console font across generic->chip driver + switch" + - drm/amd: Avoid ASSERT for some message failures + - drm: amd: display: Fix memory leakage + - drm/amd/display: fix mapping to non-allocated address + - HID: uclogic: Add frame type quirk + - HID: uclogic: Add battery quirk + - HID: uclogic: Add support for XP-PEN Deco Pro SW + - HID: uclogic: Add support for XP-PEN Deco Pro MW + - drm/msm/dsi: Add missing check for alloc_ordered_workqueue + - drm: rcar-du: Add quirk for H3 ES1.x pclk workaround + - drm: rcar-du: Fix setting a reserved bit in DPLLCR + - drm/drm_print: correct format problem + - drm/amd/display: Set hvm_enabled flag for S/G mode + - drm/client: Test for connectors before sending hotplug event + - habanalabs: extend fatal messages to contain PCI info + - habanalabs: fix bug in timestamps registration code + - docs/scripts/gdb: add necessary make scripts_gdb step + - drm/msm/dpu: Add DSC hardware blocks to register snapshot + - ASoC: soc-compress: Reposition and add pcm_mutex + - ASoC: kirkwood: Iterate over array indexes instead of using pointer math + - regulator: max77802: Bounds check regulator id against opmode + - regulator: s5m8767: Bounds check id indexing into arrays + - Revert "drm/amdgpu: TA unload messages are not actually sent to psp when + amdgpu is uninstalled" + - drm/amd/display: fix FCLK pstate change underflow + - gfs2: Improve gfs2_make_fs_rw error handling + - hwmon: (coretemp) Simplify platform device handling + - hwmon: (nct6775) Directly call ASUS ACPI WMI method + - hwmon: (nct6775) B650/B660/X670 ASUS boards support + - pinctrl: at91: use devm_kasprintf() to avoid potential leaks + - drm/amd/display: Do not commit pipe when updating DRR + - scsi: snic: Fix memory leak with using debugfs_lookup() + - scsi: ufs: core: Fix device management cmd timeout flow + - HID: logitech-hidpp: Don't restart communication if not necessary + - drm/amd/display: Enable P-state validation checks for DCN314 + - drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5 + - drm/amd/display: Disable HUBP/DPP PG on DCN314 for now + - drm/amd/display: disable SubVP + DRR to prevent underflow + - dm thin: add cond_resched() to various workqueue loops + - dm cache: add cond_resched() to various workqueue loops + - nfsd: zero out pointers after putting nfsd_files on COPY setup error + - nfsd: don't hand out delegation on setuid files being opened for write + - cifs: prevent data race in smb2_reconnect() + - drm/i915/mtl: Correct implementation of Wa_18018781329 + - drm/shmem-helper: Revert accidental non-GPL export + - driver core: fw_devlink: Avoid spurious error message + - wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu + - firmware: coreboot: framebuffer: Ignore reserved pixel color bits + - block: don't allow multiple bios for IOCB_NOWAIT issue + - block: clear bio->bi_bdev when putting a bio back in the cache + - block: be a bit more careful in checking for NULL bdev while polling + - rtc: pm8xxx: fix set-alarm race + - ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms' + - ipmi:ssif: resend_msg() cannot fail + - ipmi_ssif: Rename idle state and check + - ipmi:ssif: Add a timer between request retries + - io_uring: Replace 0-length array with flexible array + - io_uring: use user visible tail in io_uring_poll() + - io_uring: handle TIF_NOTIFY_RESUME when checking for task_work + - io_uring: add a conditional reschedule to the IOPOLL cancelation loop + - io_uring: add reschedule point to handle_tw_list() + - io_uring/rsrc: disallow multi-source reg buffers + - io_uring: remove MSG_NOSIGNAL from recvmsg + - io_uring/poll: allow some retries for poll triggering spuriously + - io_uring: fix fget leak when fs don't support nowait buffered read + - s390/extmem: return correct segment type in __segment_load() + - s390: discard .interp section + - s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler + - s390/kprobes: fix current_kprobe never cleared after kprobes reenter + - KVM: s390: disable migration mode when dirty tracking is disabled + - cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID + - cifs: Fix uninitialized memory read in smb3_qfs_tcon() + - cifs: Fix uninitialized memory reads for oparms.mode + - cifs: fix mount on old smb servers + - cifs: introduce cifs_io_parms in smb2_async_writev() + - cifs: split out smb3_use_rdma_offload() helper + - cifs: don't try to use rdma offload on encrypted connections + - cifs: Check the lease context if we actually got a lease + - cifs: return a single-use cfid if we did not get a lease + - scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization + - scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() + - scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi + - btrfs: hold block group refcount during async discard + - btrfs: sysfs: update fs features directory asynchronously + - locking/rwsem: Prevent non-first waiter from spinning in down_write() + slowpath + - ksmbd: fix wrong data area length for smb2 lock request + - ksmbd: do not allow the actual frame length to be smaller than the rfc1002 + length + - ksmbd: fix possible memory leak in smb2_lock() + - torture: Fix hang during kthread shutdown phase + - ARM: dts: exynos: correct HDMI phy compatible in Exynos4 + - io_uring: mark task TASK_RUNNING before handling resume/task work + - hfs: fix missing hfs_bnode_get() in __hfs_bnode_create + - fs: hfsplus: fix UAF issue in hfsplus_put_super + - exfat: fix reporting fs error when reading dir beyond EOF + - exfat: fix unexpected EOF while reading dir + - exfat: redefine DIR_DELETED as the bad cluster number + - exfat: fix inode->i_blocks for non-512 byte sector size device + - fs: dlm: start midcomms before scand + - fs: dlm: fix use after free in midcomms commit + - fs: dlm: be sure to call dlm_send_queue_flush() + - fs: dlm: fix race setting stop tx flag + - fs: dlm: don't set stop rx flag after node reset + - fs: dlm: move sending fin message into state change handling + - fs: dlm: send FIN ack back in right cases + - f2fs: fix information leak in f2fs_move_inline_dirents() + - f2fs: retry to update the inode page given data corruption + - f2fs: fix cgroup writeback accounting with fs-layer encryption + - f2fs: fix kernel crash due to null io->bio + - f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()" + - ocfs2: fix defrag path triggering jbd2 ASSERT + - ocfs2: fix non-auto defrag path not working issue + - fs/cramfs/inode.c: initialize file_ra_state + - selftests/landlock: Skip overlayfs tests when not supported + - selftests/landlock: Test ptrace as much as possible with Yama + - udf: Truncate added extents on failed expansion + - udf: Do not bother merging very long extents + - udf: Do not update file length for failed writes to inline files + - udf: Preserve link count of system files + - udf: Detect system inodes linked into directory hierarchy + - udf: Fix file corruption when appending just after end of preallocated + extent + - md: don't update recovery_cp when curr_resync is ACTIVE + - KVM: Destroy target device if coalesced MMIO unregistration fails + - KVM: VMX: Fix crash due to uninitialized current_vmcs + - KVM: Register /dev/kvm as the _very_ last thing during initialization + - KVM: x86: Purge "highest ISR" cache when updating APICv state + - KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps + - KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled + - KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID + - KVM: SVM: Flush the "current" TLB when activating AVIC + - KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target + - KVM: SVM: Don't put/load AVIC when setting virtual APIC mode + - KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI + - KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32 + - KVM: SVM: Fix potential overflow in SEV's send|receive_update_data() + - KVM: SVM: hyper-v: placate modpost section mismatch error + - selftests: x86: Fix incorrect kernel headers search path + - x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows) + - x86/crash: Disable virt in core NMI crash handler to avoid double shootdown + - x86/reboot: Disable virtualization in an emergency if SVM is supported + - x86/reboot: Disable SVM, not just VMX, when stopping CPUs + - x86/kprobes: Fix __recover_optprobed_insn check optimizing logic + - x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe + range + - x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter + - x86/microcode/AMD: Add a @cpu parameter to the reloading functions + - x86/microcode/AMD: Fix mixed steppings support + - x86/speculation: Allow enabling STIBP with legacy IBRS + - Documentation/hw-vuln: Document the interaction between IBRS and STIBP + - virt/sev-guest: Return -EIO if certificate buffer is not large enough + - brd: mark as nowait compatible + - brd: return 0/-error from brd_insert_page() + - brd: check for REQ_NOWAIT and set correct page allocation mask + - ima: fix error handling logic when file measurement failed + - ima: Align ima_file_mmap() parameters with mmap_file LSM hook + - selftests/powerpc: Fix incorrect kernel headers search path + - selftests/ftrace: Fix eprobe syntax test case to check filter support + - selftests: sched: Fix incorrect kernel headers search path + - selftests: core: Fix incorrect kernel headers search path + - selftests: pid_namespace: Fix incorrect kernel headers search path + - selftests: arm64: Fix incorrect kernel headers search path + - selftests: clone3: Fix incorrect kernel headers search path + - selftests: pidfd: Fix incorrect kernel headers search path + - selftests: membarrier: Fix incorrect kernel headers search path + - selftests: kcmp: Fix incorrect kernel headers search path + - selftests: media_tests: Fix incorrect kernel headers search path + - selftests: gpio: Fix incorrect kernel headers search path + - selftests: filesystems: Fix incorrect kernel headers search path + - selftests: user_events: Fix incorrect kernel headers search path + - selftests: ptp: Fix incorrect kernel headers search path + - selftests: sync: Fix incorrect kernel headers search path + - selftests: rseq: Fix incorrect kernel headers search path + - selftests: move_mount_set_group: Fix incorrect kernel headers search path + - selftests: mount_setattr: Fix incorrect kernel headers search path + - selftests: perf_events: Fix incorrect kernel headers search path + - selftests: ipc: Fix incorrect kernel headers search path + - selftests: futex: Fix incorrect kernel headers search path + - selftests: drivers: Fix incorrect kernel headers search path + - selftests: dmabuf-heaps: Fix incorrect kernel headers search path + - selftests: vm: Fix incorrect kernel headers search path + - selftests: seccomp: Fix incorrect kernel headers search path + - irqdomain: Fix association race + - irqdomain: Fix disassociation race + - irqdomain: Look for existing mapping only once + - irqdomain: Drop bogus fwspec-mapping error handling + - irqdomain: Refactor __irq_domain_alloc_irqs() + - irqdomain: Fix mapping-creation race + - irqdomain: Fix domain registration race + - crypto: qat - fix out-of-bounds read + - mm/damon/paddr: fix missing folio_put() + - ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls() + - ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC + - jbd2: fix data missing when reusing bh which is ready to be checkpointed + - ext4: optimize ea_inode block expansion + - ext4: refuse to create ea block when umounted + - cxl/pmem: Fix nvdimm registration races + - Input: exc3000 - properly stop timer on shutdown + - mtd: spi-nor: sfdp: Fix index value for SCCR dwords + - mtd: spi-nor: spansion: Consider reserved bits in CFR5 register + - dm: send just one event on resize, not two + - dm: add cond_resched() to dm_wq_work() + - dm: add cond_resched() to dm_wq_requeue_work() + - wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice + - wifi: rtl8xxxu: Use a longer retry limit of 48 + - wifi: ath11k: allow system suspend to survive ath11k + - wifi: cfg80211: Fix use after free for wext + - wifi: cfg80211: Set SSID if it is not already set + - cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies + - qede: fix interrupt coalescing configuration + - thermal: intel: powerclamp: Fix cur_state for multi package system + - dm flakey: fix logic when corrupting a bio + - dm cache: free background tracker's queued work in btracker_destroy + - dm flakey: don't corrupt the zero page + - dm flakey: fix a bug with 32-bit highmem systems + - hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation + - hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div() + - spi: intel: Check number of chip selects after reading the descriptor + - ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node + - ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node + - ARM: dts: exynos: correct TMU phandle in Exynos4210 + - ARM: dts: exynos: correct TMU phandle in Exynos4 + - ARM: dts: exynos: correct TMU phandle in Odroid XU3 family + - ARM: dts: exynos: correct TMU phandle in Exynos5250 + - ARM: dts: exynos: correct TMU phandle in Odroid XU + - ARM: dts: exynos: correct TMU phandle in Odroid HC1 + - arm64: acpi: Fix possible memory leak of ffh_ctxt + - arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP + - arm64: Reset KASAN tag in copy_highpage with HW tags only + - fuse: add inode/permission checks to fileattr_get/fileattr_set + - rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails + - ceph: update the time stamps and try to drop the suid/sgid + - regulator: core: Use ktime_get_boottime() to determine how long a regulator + was off + - panic: fix the panic_print NMI backtrace setting + - mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON + - genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced + - genirq/msi: Take the per-device MSI lock before validating the control + structure + - spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits + - alpha: fix FEN fault handling + - dax/kmem: Fix leak of memory-hotplug resources + - mips: fix syscall_get_nr + - media: ipu3-cio2: Fix PM runtime usage_count in driver unbind + - remoteproc/mtk_scp: Move clk ops outside send_lock + - vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd + - docs: gdbmacros: print newest record + - mm: memcontrol: deprecate charge moving + - mm/thp: check and bail out if page in deferred queue already + - ktest.pl: Give back console on Ctrt^C on monitor + - kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list + - ktest.pl: Fix missing "end_monitor" when machine check fails + - ktest.pl: Add RUN_TIMEOUT option with default unlimited + - memory tier: release the new_memtier in find_create_memory_tier() + - ring-buffer: Handle race between rb_move_tail and rb_check_pages + - tools/bootconfig: fix single & used for logical condition + - tracing/eprobe: Fix to add filter on eprobe description in README file + - iommu/amd: Add a length limitation for the ivrs_acpihid command-line + parameter + - scsi: aacraid: Allocate cmd_priv with scsicmd + - scsi: qla2xxx: Fix link failure in NPIV environment + - scsi: qla2xxx: Check if port is online before sending ELS + - scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests + - scsi: qla2xxx: Remove unintended flag clearing + - scsi: qla2xxx: Fix erroneous link down + - scsi: qla2xxx: Remove increment of interface err cnt + - scsi: ses: Don't attach if enclosure has no components + - scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process() + - scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses + - scsi: ses: Fix possible desc_ptr out-of-bounds accesses + - scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() + - RISC-V: add a spin_shadow_stack declaration + - riscv: Avoid enabling interrupts in die() + - riscv: mm: fix regression due to update_mmu_cache change + - riscv: jump_label: Fixup unaligned arch_static_branch function + - riscv: ftrace: Fixup panic by disabling preemption + - riscv, mm: Perform BPF exhandler fixup on page fault + - riscv: ftrace: Remove wasted nops for !RISCV_ISA_C + - riscv: ftrace: Reduce the detour code size to half + - MIPS: DTS: CI20: fix otg power gpio + - PCI/PM: Observe reset delay irrespective of bridge_d3 + - PCI: Unify delay handling for reset and resume + - PCI: hotplug: Allow marking devices as disconnected during bind/unbind + - PCI: Avoid FLR for AMD FCH AHCI adapters + - PCI/DPC: Await readiness of secondary bus after reset + - bus: mhi: ep: Only send -ENOTCONN status if client driver is available + - bus: mhi: ep: Move chan->lock to the start of processing queued ch ring + - bus: mhi: ep: Save channel state locally during suspend and resume + - iommufd: Make sure to zero vfio_iommu_type1_info before copying to user + - iommufd: Do not add the same hwpt to the ioas->hwpt_list twice + - iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode + - iommu/vt-d: Fix PASID directory pointer coherency + - vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR + - vfio/type1: prevent underflow of locked_vm via exec() + - vfio/type1: track locked_vm per dma + - vfio/type1: restore locked_vm + - drm/amd: Fix initialization for nbio 7.5.1 + - drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv + - drm/radeon: Fix eDP for single-display iMac11,2 + - drm/i915: Don't use stolen memory for ring buffers with LLC + - drm/i915: Don't use BAR mappings for ring buffers with LLC + - drm/gud: Fix UBSAN warning + - drm/edid: fix AVI infoframe aspect ratio handling + - drm/edid: fix parsing of 3D modes from HDMI VSDB + - qede: avoid uninitialized entries in coal_entry array + - brd: use radix_tree_maybe_preload instead of radix_tree_preload + - net: avoid double iput when sock_alloc_file fails + - Linux 6.2.3 + + * Miscellaneous Ubuntu changes + - [Config] update annotations after applying 6.2.3 stable patches + - [Config] update annotations after applying 6.2.6 stable patches + + -- Andrea Righi Tue, 14 Mar 2023 16:43:44 +0100 + +linux (6.2.0-16.16) lunar; urgency=medium + + * lunar/linux: 6.2.0-16.16 -proposed tracker (LP: #2009914) + + * linux-libc-dev is no longer multi-arch safe (LP: #2009355) + - Revert "UBUNTU: [Packaging] install headers to debian/linux-libc-dev + directly" + + * linux: CONFIG_SERIAL_8250_MID=y (LP: #2009283) + - [Config] enable CONFIG_SERIAL_8250_MID=y + + * cpufreq: intel_pstate: Update Balance performance EPP for Sapphire Rapids + (LP: #2008519) + - cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids + + -- Andrea Righi Fri, 10 Mar 2023 18:34:28 +0100 + +linux (6.2.0-15.15) lunar; urgency=medium + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: document annotations headers + + -- Andrea Righi Fri, 10 Mar 2023 07:36:59 +0100 + +linux (6.2.0-14.14) lunar; urgency=medium + + * lunar/linux: 6.2.0-14.14 -proposed tracker (LP: #2009856) + + * Miscellaneous Ubuntu changes + - [Packaging] rust: add rust build dependencies to all arches + - [Packaging] Support skipped dkms modules + - [Packaging] actually enforce set -e in dkms-build--nvidia-N + - [Packaging] Preserve the correct log file variable value + - [Packaging] update getabis + + -- Andrea Righi Thu, 09 Mar 2023 16:40:36 +0100 + +linux (6.2.0-13.13) lunar; urgency=medium + + * lunar/linux: 6.2.0-13.13 -proposed tracker (LP: #2009704) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/master) + + * mt7921: add support of MTFG table (LP: #2009642) + - wifi: mt76: mt7921: add support to update fw capability with MTFG table + + -- Andrea Righi Wed, 08 Mar 2023 14:40:25 +0100 + +linux (6.2.0-12.12) lunar; urgency=medium + + * lunar/linux: 6.2.0-12.12 -proposed tracker (LP: #2009698) + + * Miscellaneous Ubuntu changes + - SAUCE: enforce rust availability only on x86_64 + - [Config] update CONFIG_RUST_IS_AVAILABLE + + -- Andrea Righi Wed, 08 Mar 2023 12:50:15 +0100 + +linux (6.2.0-11.11) lunar; urgency=medium + + * lunar/linux: 6.2.0-11.11 -proposed tracker (LP: #2009697) + + * Miscellaneous Ubuntu changes + - [Packaging] do not stop the build if rust is not available + + -- Andrea Righi Wed, 08 Mar 2023 12:24:55 +0100 + +linux (6.2.0-10.10) lunar; urgency=medium + + * lunar/linux: 6.2.0-10.10 -proposed tracker (LP: #2009673) + + * Packaging resync (LP: #1786013) + - debian/dkms-versions -- update from kernel-versions (main/master) + + * enable Rust support in the kernel (LP: #2007654) + - [Packaging] propagate makefile variables to kernelconfig + - SAUCE: rust: fix regexp in scripts/is_rust_module.sh + - SAUCE: scripts: rust: drop is_rust_module.sh + - SAUCE: rust: allow to use INIT_STACK_ALL_ZERO + - SAUCE: scripts: Exclude Rust CUs with pahole + - SAUCE: modpost: support arbitrary symbol length in modversion + - SAUCE: allows to enable Rust with modversions + - SAUCE: rust: properly detect the version of libclang used by bindgen + - [Packaging] rust: add the proper make flags to enable rust support + - [Packaging] add rust dependencies + - [Packaging] bpftool: always use vmlinux to generate headers + - [Packaging] run rustavailable target as debugging before build + - [Config] enable Rust support + + * Fail to output sound to external monitor which connects via docking station + (LP: #2009024) + - [Config] Enable CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM + + * Miscellaneous Ubuntu changes + - SAUCE: Makefile: replace rsync with tar + + -- Andrea Righi Wed, 08 Mar 2023 12:01:56 +0100 + +linux (6.2.0-1.1) lunar; urgency=medium + + * lunar/linux: 6.2.0-1.1 -proposed tracker (LP: #2009621) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + - debian/dkms-versions -- update from kernel-versions (main/master) + + * kinetic: apply new apparmor and LSM stacking patch set (LP: #1989983) + - SAUCE: apparmor: Add fine grained mediation of posix mqueues + - SAUCE: apparmor: add user namespace creation mediation + + * Lunar update: v6.2.2 upstream stable release (LP: #2009358) + - ALSA: hda: cs35l41: Correct error condition handling + - crypto: arm64/sm4-gcm - Fix possible crash in GCM cryption + - bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state + - vc_screen: don't clobber return value in vcs_read + - drm/amd/display: Move DCN314 DOMAIN power control to DMCUB + - drm/amd/display: Properly reuse completion structure + - scripts/tags.sh: fix incompatibility with PCRE2 + - wifi: rtw88: usb: Set qsel correctly + - wifi: rtw88: usb: send Zero length packets if necessary + - wifi: rtw88: usb: drop now unnecessary URB size check + - usb: dwc3: pci: add support for the Intel Meteor Lake-M + - USB: serial: option: add support for VW/Skoda "Carstick LTE" + - usb: gadget: u_serial: Add null pointer check in gserial_resume + - arm64: dts: uniphier: Fix property name in PXs3 USB node + - usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO + - USB: core: Don't hold device lock while reading the "descriptors" sysfs file + - Linux 6.2.2 + + * Lunar update: v6.2.1 upstream stable release (LP: #2009127) + - uaccess: Add speculation barrier to copy_from_user() + - x86/alternatives: Introduce int3_emulate_jcc() + - x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions + - x86/static_call: Add support for Jcc tail-calls + - HID: mcp-2221: prevent UAF in delayed work + - wifi: mwifiex: Add missing compatible string for SD8787 + - audit: update the mailing list in MAINTAINERS + - platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY + - platform/x86: nvidia-wmi-ec-backlight: Add force module parameter + - ext4: Fix function prototype mismatch for ext4_feat_ktype + - randstruct: disable Clang 15 support + - bpf: add missing header file include + - Linux 6.2.1 + + * Fix mediatek wifi driver crash when loading wrong SAR table (LP: #2009118) + - wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read + + * overlayfs mounts as R/O over idmapped mount (LP: #2009065) + - SAUCE: overlayfs: handle idmapped mounts in ovl_do_(set|remove)xattr + + * RaptorLake: Fix the Screen is shaking by onboard HDMI port in mirror mode + (LP: #1993561) + - drm/i915/display: Drop check for doublescan mode in modevalid + - drm/i915/display: Prune Interlace modes for Display >=12 + + * screen flicker after PSR2 enabled (LP: #2007516) + - SAUCE: drm/i915/display/psr: Disable PSR2 sel fetch on panel SHP 5457 + + * [23.04 FEAT] Support for new IBM Z Hardware (IBM z16) - Reset DAT-Protection + facility support (LP: #1982378) + - s390/mm: add support for RDP (Reset DAT-Protection) + + * [23.04 FEAT] zcrypt DD: AP command filtering (LP: #2003637) + - s390/zcrypt: introduce ctfm field in struct CPRBX + + * rtcpie in timers from ubuntu_kernel_selftests randomly failing + (LP: #1814234) + - SAUCE: selftest: rtcpie: Force passing unreliable subtest + + * [23.04 FEAT] Support for List-Directed IPL and re-IPL from ECKD DASD + (LP: #2003394) + - s390/ipl: add DEFINE_GENERIC_LOADPARM() + - s390/ipl: add loadparm parameter to eckd ipl/reipl data + + * Miscellaneous Ubuntu changes + - SAUCE: drm/i915/sseu: fix max_subslices array-index-out-of-bounds access + - SAUCE: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type + - SAUCE: Revert "fbdev: Make registered_fb[] private to fbmem.c" + - [Packaging] disable signing for ppc64el + - [Config] define CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS + - SAUCE: Revert "arm64/fpsimd: Make kernel_neon_ API _GPL" + + -- Andrea Righi Tue, 07 Mar 2023 18:45:31 +0100 + +linux (6.2.0-0.0) lunar; urgency=medium + + * Empty entry + + -- Andrea Righi Fri, 03 Mar 2023 08:42:43 +0100 + +linux-unstable (6.2.0-10.10) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-10.10 -proposed tracker (LP: #2007818) + + * Built-in camera device dies after runtime suspended (LP: #2007530) + - SAUCE: usb: xhci: Workaround for runpm issue on AMD xHC + + * Miscellaneous Ubuntu changes + - [Config] update annotations after rebase to v6.2 + + [ Upstream Kernel Changes ] + + * Rebase to v6.2 + + -- Andrea Righi Mon, 20 Feb 2023 10:36:20 +0100 + +linux-unstable (6.2.0-9.9) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-9.9 -proposed tracker (LP: #2007069) + + * Move kernel ADT tests to python3 (LP: #2004429) + - [Debian] Use a python3 compatable kernel-testing repo + + * Mediatek FM350-GL wwan module failed to init: Invalid device status 0x1 + (LP: #2002089) + - SAUCE: Revert "net: wwan: t7xx: Add AP CLDMA" + - SAUCE: net: wwan: t7xx: Add AP CLDMA + - SAUCE: net: wwan: t7xx: Infrastructure for early port configuration + - SAUCE: net: wwan: t7xx: PCIe reset rescan + - SAUCE: net: wwan: t7xx: Enable devlink based fw flashing and coredump + collection + - SAUCE: net: wwan: t7xx: Devlink documentation + + * LXD containers using shiftfs on ZFS or TMPFS broken on 5.15.0-48.54 + (LP: #1990849) + - SAUCE: shiftfs: fix -EOVERFLOW inside the container + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: do not drop undefined configs in derivatives + - [Packaging]: annotations: fix _remove_entry() logic + - [Packaging] rsync no longer available on lunar + - [Packaging] annotations: Handle single-line annoation rules + - [Packaging] annotations: Preserve single-line annotation rules + - [Packaging] annotations: Fix linter errors + - [Packaging] annotations: Clean up policy writes + - [Packaging] annotations: Handle tabs in annotations file + - [Packaging] annotations: Fail on invalid lines + - [Packaging] annotations: Write out annotations with notes first + - [Packaging] annotations: Check validity of FLAVOUR_DEP + - [Config] update annotations to split configs with/without notes + - [Packaging] annotations: various code cleanups + - [Config] update annotations after rebase to v6.2-rc8 + + * Miscellaneous upstream changes + - selftests/net: mv bpf/nat6to4.c to net folder + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc8 + + -- Andrea Righi Mon, 13 Feb 2023 09:32:18 +0100 + +linux-unstable (6.2.0-8.8) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-8.8 -proposed tracker (LP: #2004229) + + * Miscellaneous Ubuntu changes + - [Packaging] re-enable signing for ppc64el and s390x + - SAUCE: s390/decompressor: specify __decompress() buf len to avoid overflow + + -- Andrea Righi Tue, 31 Jan 2023 08:21:21 +0100 + +linux-unstable (6.2.0-7.7) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-7.7 -proposed tracker (LP: #2004142) + + -- Andrea Righi Mon, 30 Jan 2023 10:23:15 +0100 + +linux-unstable (6.2.0-6.6) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-6.6 -proposed tracker (LP: #2004138) + + * Miscellaneous Ubuntu changes + - [Packaging] debian/rules: Bring back 'editconfigs' + - [Packaging] debian/rules: 1-maintainer.mk -- Use make's if-else + - [Packaging] annotations: make sure to always drop undefined configs + - [Config] update annotations after rebase to v6.2-rc6 + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc6 + + -- Andrea Righi Mon, 30 Jan 2023 09:20:26 +0100 + +linux-unstable (6.2.0-5.5) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-5.5 -proposed tracker (LP: #2003682) + + * [23.04] Kernel 6.2 does not boot on s390x (LP: #2003348) + - SAUCE Revert "zstd: import usptream v1.5.2" + - SAUCE: Revert "zstd: Move zstd-common module exports to + zstd_common_module.c" + + * Revoke & rotate to new signing key (LP: #2002812) + - [Packaging] Revoke and rotate to new signing key + + * CVE-2023-0179 + - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits + + * [23.04] net/smc: Alibaba patches about tunable buffer sizes may cause errors + and need to be removed (kernel 6.2) (LP: #2003547) + - SAUCE: Revert "net/smc: Unbind r/w buffer size from clcsock and make them + tunable" + - SAUCE: Revert "net/smc: Introduce a specific sysctl for TEST_LINK time" + + * 5.15 stuck at boot on c4.large (LP: #1956780) + - SAUCE: Revert "PCI/MSI: Mask MSI-X vectors only on success" + + * Miscellaneous Ubuntu changes + - [Packaging] scripts/misc/kernelconfig: Disable config checks for mainline + builds + - [Packaging] annotations: add CONFIG_GCC_VERSION to the list of ignored + configs + + -- Andrea Righi Mon, 23 Jan 2023 08:20:26 +0100 + +linux-unstable (6.2.0-4.4) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-4.4 -proposed tracker (LP: #2003051) + + * Miscellaneous Ubuntu changes + - [Packaging] add python3 as a build dependency + - [Packaging] scripts/misc/kernelconfig: Rewrite + + -- Andrea Righi Tue, 17 Jan 2023 09:18:54 +0100 + +linux-unstable (6.2.0-3.3) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-3.3 -proposed tracker (LP: #2002939) + + * Enable kernel config for P2PDMA (LP: #1987394) + - [Config] Enable CONFIG_HSA_AMD_P2P + + * Miscellaneous Ubuntu changes + - SAUCE: (no-up) Remove obj- += foo.o hack + - SAUCE: (no-up) re-add ubuntu/ directory + - [Config] enable EFI handover protocol + - [Packaging] Fix module-check error when modules are compressed + - SAUCE: (no-up) do not remove debian directory by 'make mrproper' + - [Packaging] debian/rules: Drop AUTOBUILD + - [Packaging] debian/rules: Drop NOKERNLOG and PRINTSHAS env variables + - [Packaging] debian/rules: Replace skip variables with skip_checks + - [Packaging] checks/retpoline-check: Make 'skipretpoline' argument optional + - [Packaging] checks/module-signature-check: Add 'skip_checks' argument + - [Packaging] debian/rules: Rename 'skip_dbg' to 'do_dbgsym_package' + - [Packaging] debian/rules: Rename 'skip_checks' to 'do_skip_checks' + - [Packaging] debian/rules: Rename 'full_build' to 'do_full_build' + - [Packaging] debian/rules: Fix PPA debug package builds + - [Packaging] debian/rules: Remove debug package install directory earlier + - [Packaging] debian/rules: Remove unnecessary 'lockme_' variables + - [Packaging] debian/rules: Remove unused target 'diffupstream' + - [Packaging] debian/rules: Mark PHONY targets individually + - [Packaging] debian/rules: Clean up 'help' target output + - [Packaging] debian/rules: Clean up 'printenv' target output + - [Packaging] debian/rules: Add missing 'do_' variables to 'printenv' + - [Config] update annotations after rebase to v6.2-rc4 + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc4 + + -- Andrea Righi Mon, 16 Jan 2023 16:01:40 +0100 + +linux-unstable (6.2.0-2.2) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-2.2 -proposed tracker (LP: #2001892) + + * Soundwire support for the Intel RPL Gen 0C40/0C11 platforms (LP: #2000030) + - SAUCE: ASoC: Intel: soc-acpi: add configuration for variant of 0C40 product + - SAUCE: ASoC: Intel: soc-acpi: add configuration for variant of 0C11 product + + * Miscellaneous Ubuntu changes + - [Config] update toolchain version in annotations + + * Miscellaneous upstream changes + - Revert "UBUNTU: [Packaging] Support skipped dkms modules" + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc2 + + -- Andrea Righi Thu, 05 Jan 2023 09:19:55 +0100 + +linux-unstable (6.2.0-1.1) lunar; urgency=medium + + * lunar/linux-unstable: 6.2.0-1.1 -proposed tracker (LP: #2000904) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: remove configs that are undefined across all + arches/flavours + - SAUCE: Revert "apparmor: make __aa_path_perm() static" + - [Packaging] abi-check: ignore failures when abi check is skipped + - [Packaging] temporarily disable zfs dkms + - [Config] update annotations after rebase to 6.2-rc1 + + [ Upstream Kernel Changes ] + + * Rebase to v6.1-rc1 + + -- Andrea Righi Wed, 04 Jan 2023 12:08:32 +0100 + +linux-unstable (6.2.0-0.0) lunar; urgency=medium + + * Empty entry + + -- Andrea Righi Sun, 01 Jan 2023 10:16:00 +0100 + +linux (6.1.0-11.11) lunar; urgency=medium + + * lunar/linux: 6.1.0-11.11 -proposed tracker (LP: #2000704) + + * Packaging resync (LP: #1786013) + - [Packaging] update helper scripts + + * Lunar update: v6.1.1 upstream stable release (LP: #2000706) + - x86/vdso: Conditionally export __vdso_sgx_enter_enclave() + - libbpf: Fix uninitialized warning in btf_dump_dump_type_data + - PCI: mt7621: Add sentinel to quirks table + - mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem + - mips: ralink: mt7621: soc queries and tests as functions + - mips: ralink: mt7621: do not use kzalloc too early + - irqchip/ls-extirq: Fix endianness detection + - udf: Discard preallocation before extending file with a hole + - udf: Fix preallocation discarding at indirect extent boundary + - udf: Do not bother looking for prealloc extents if i_lenExtents matches + i_size + - udf: Fix extending file within last block + - usb: gadget: uvc: Prevent buffer overflow in setup handler + - USB: serial: option: add Quectel EM05-G modem + - USB: serial: cp210x: add Kamstrup RF sniffer PIDs + - USB: serial: f81232: fix division by zero on line-speed change + - USB: serial: f81534: fix division by zero on line-speed change + - xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N + - staging: r8188eu: fix led register settings + - igb: Initialize mailbox message for VF reset + - usb: typec: ucsi: Resume in separate work + - usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system + for Raptor Lake + - cifs: fix oops during encryption + - KEYS: encrypted: fix key instantiation with user-provided data + - Linux 6.1.1 + + * Expose built-in trusted and revoked certificates (LP: #1996892) + - [Packaging] Expose built-in trusted and revoked certificates + + * Fix System cannot detect bluetooth after running suspend stress test + (LP: #1998727) + - wifi: rtw88: 8821c: enable BT device recovery mechanism + + * Gnome doesn't run smooth when performing normal usage with RPL-P CPU + (LP: #1998419) + - drm/i915/rpl-p: Add stepping info + + * Mute/mic LEDs no function on a HP platfrom (LP: #1998882) + - ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook + + * Add additional Mediatek MT7922 BT device ID (LP: #1998885) + - Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922 + + * Support Icicle Kit reference design v2022.10 (LP: #1993148) + - SAUCE: riscv: dts: microchip: Disable PCIe on the Icicle Kit + + * Add iommu passthrough quirk for Intel IPU6 on RaptorLake (LP: #1989041) + - SAUCE: iommu: intel-ipu: use IOMMU passthrough mode for Intel IPUs on Raptor + Lake + + * Enable Intel FM350 wwan CCCI driver port logging (LP: #1997686) + - net: wwan: t7xx: use union to group port type specific data + - net: wwan: t7xx: Add port for modem logging + + * TEE Support for CCP driver (LP: #1991608) + - crypto: ccp - Add support for TEE for PCI ID 0x14CA + + * Kinetic update: v5.19.17 upstream stable release (LP: #1994179) + - Revert "fs: check FMODE_LSEEK to control internal pipe splicing" + - kbuild: Add skip_encoding_btf_enum64 option to pahole + + * Kinetic update: v5.19.15 upstream stable release (LP: #1994078) + - Revert "clk: ti: Stop using legacy clkctrl names for omap4 and 5" + + * support independent clock and LED GPIOs for Intel IPU6 platforms + (LP: #1989046) + - SAUCE: platform/x86: int3472: support independent clock and LED GPIOs + + * Kernel livepatch support for for s390x (LP: #1639924) + - [Config] Enable EXPOLINE_EXTERN on s390x + + * Kinetic update: v5.19.7 upstream stable release (LP: #1988733) + - Revert "PCI/portdrv: Don't disable AER reporting in + get_port_device_capability()" + + * Kinetic update: v5.19.3 upstream stable release (LP: #1987345) + - Revert "mm: kfence: apply kmemleak_ignore_phys on early allocated pool" + + * Fix non-working e1000e device after resume (LP: #1951861) + - SAUCE: Revert "e1000e: Add polling mechanism to indicate CSME DPG exit" + + * Add additional Mediatek MT7921 WiFi/BT device IDs (LP: #1937004) + - SAUCE: Bluetooth: btusb: Add support for Foxconn Mediatek Chip + + * Fix system sleep on TGL systems with Intel ME (LP: #1919321) + - SAUCE: PCI: Serialize TGL e1000e PM ops + + * Fix broken e1000e device after S3 (LP: #1897755) + - SAUCE: e1000e: Increase polling timeout on MDIC ready bit + + * Fix unusable USB hub on Dell TB16 after S3 (LP: #1855312) + - SAUCE: USB: core: Make port power cycle a seperate helper function + - SAUCE: USB: core: Attempt power cycle port when it's in eSS.Disabled state + + * Set explicit CC in the headers package (LP: #1999750) + - [Packaging] Set explicit CC in the headers package + + * commit cf58599cded35cf4affed1e659c0e2c742d3fda7 seems to be missing in + kinetic master to remove "hio" reference from Makefile (LP: #1999556) + - SAUCE: remove leftover reference to ubuntu/hio driver + + * Miscellaneous Ubuntu changes + - [Packaging] kernelconfig: always complete all config checks + - [Packaging] annotations: unify same rule across all flavour within the same + arch + - [Config] annotations: compact annotations file + - [Config] disable EFI_ZBOOT + - SAUCE: input: i8042: fix section mismatch warning + - debian/dkms-versions -- re-enable zfs + - [Packaging] old-kernelconfig: update config-check path + - [Packaging] update getabis + - [Packaging] update Ubuntu.md + + * Miscellaneous upstream changes + - Revert "drm/i915/opregion: check port number bounds for SWSCI display power + state" + + -- Andrea Righi Fri, 30 Dec 2022 11:23:16 +0100 + +linux (6.1.0-10.10) lunar; urgency=medium + + * lunar/linux: 6.1.0-10.10 -proposed tracker (LP: #1999569) + + * Soundwire support for the Intel RPL Gen platforms (LP: #1997944) + - ASoC: Intel: sof_sdw: Add support for SKU 0C10 product + - ASoC: Intel: soc-acpi: add SKU 0C10 SoundWire configuration + - ASoC: Intel: sof_sdw: Add support for SKU 0C40 product + - ASoC: Intel: soc-acpi: add SKU 0C40 SoundWire configuration + - ASoC: Intel: sof_sdw: Add support for SKU 0C4F product + - ASoC: rt1318: Add RT1318 SDCA vendor-specific driver + - ASoC: intel: sof_sdw: add rt1318 codec support. + - ASoC: Intel: sof_sdw: Add support for SKU 0C11 product + - ASoC: Intel: soc-acpi: add SKU 0C11 SoundWire configuration + - SAUCE: ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product + - [Config] enable CONFIG_SND_SOC_RT1318_SDW + + * Virtual GPU driver packaging regression (LP: #1996112) + - [Packaging] Reintroduce VM DRM drivers into modules + + -- Andrea Righi Tue, 13 Dec 2022 22:14:08 +0100 + +linux (6.1.0-9.9) lunar; urgency=medium + + * Empty entry (ABI bump) + + -- Andrea Righi Tue, 13 Dec 2022 21:31:08 +0100 + +linux (6.1.0-3.3) lunar; urgency=medium + + * lunar/linux: 6.1.0-3.3 -proposed tracker (LP: #1999534) + + * [DEP-8] Run ADT regression suite for lowlatency kernels Jammy and later + (LP: #1999528) + - [DEP-8] Fix regression suite to run on lowlatency + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: do not add constraints on toolchain versions + + -- Andrea Righi Tue, 13 Dec 2022 16:45:59 +0100 + +linux (6.1.0-2.2) lunar; urgency=medium + + * lunar/linux: 6.1.0-2.2 -proposed tracker (LP: #1999411) + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: do not enforce toolchain versions + + -- Andrea Righi Mon, 12 Dec 2022 17:05:59 +0100 + +linux (6.1.0-1.1) lunar; urgency=medium + + * lunar/linux: 6.1.0-1.1 -proposed tracker (LP: #1999373) + + * Packaging resync (LP: #1786013) + - [Packaging] update variants + + * Miscellaneous Ubuntu changes + - [Packaging] annotations: set and delete configs from command line + - [Packaging] migrateconfigs: ignore README.rst if it doesn't exist + - [Packaging] migrate-annotations: properly determine arches in derivatives + - [Packaging] annotations: allow to set note to config options directly + - [Packaging] annotations: assume --query as default command + - [Packaging] annotations: allow to query using CONFIG_